Search

Triplet-fusion-based photon upconversion holds promise for a wide range of applications, from photovoltaics to bioimaging. The efficiency of triplet fusion, however, is fundamentally limited in conventional molecular and polymeric systems by its spin dependence. Here, we show that the inherent tailorability of metal–organic frameworks (MOFs), combined with their highly porous but ordered structure, minimizes intertriplet exchange coupling and engineers effective spin mixing between singlet and quintet triplet–triplet pair states. We demonstrate singlet–quintet coupling in a pyrene-based MOF, NU-1000. An anomalous magnetic field effect is observed from NU-1000 corresponding to an induced resonance between singlet and quintet states that yields an increased fusion rate at room temperature under a relatively low applied magnetic field of 0.14 T. Our results suggest that MOFs offer particular promise for engineering the spin dynamics of multiexcitonic processes and improving their upconversion performance.

Infrared-to-visible photon upconversion could benefit applications such as photovoltaics, infrared sensing, and bioimaging. Solid-state upconversion based on triplet exciton annihilation sensitized by nanocrystals is one of the most promising approaches, albeit limited by relatively weak optical absorption. Here, we integrate the upconverting layers into a Fabry-Perot microcavity with quality factor Q = 75. At the resonant wavelength λ = 980 nm, absorption increases 74-fold and we observe a 227-fold increase in the intensity of upconverted emission. The threshold excitation intensity is reduced by 2 orders of magnitude to a subsolar flux of 13 mW/cm2. We measure an external quantum efficiency of 0.06 ± 0.01% and a 2.2-fold increase in the generation yield of upconverted photons. Our work highlights the potential of triplet-triplet annihilation-based upconversion in low-intensity sensing applications and demonstrates the importance of photonic designs in addition to materials engineering to improve the efficiency of solid-state upconversion.

Two-dimensional (2D) π-conjugated metal–organic frameworks (πMOFs) are a new class of designer electronic materials that are porous and tunable through the constituent organic molecules and choice of metal ions. Unlike typical MOFs, 2D πMOFs exhibit high conductivity mediated by delocalized π-electrons and have promising applications in a range of electrical devices as well as exotic physical properties. Here, we develop a growth method that generates single-crystal plates with lateral dimensions exceeding 10 μm, orders of magnitude bigger than previous methods. Synthesis of large single crystals eliminates a significant impediment to the fundamental characterization of the materials, allowing determination of the intrinsic conductivity and mobility along the 2D plane of πMOFs. A representative 2D πMOF, Ni-CAT-1, exhibits a conductivity of up to 2 S/cm, and Hall measurement reveals the origin of the high conductivity. Characterization of crystalline 2D πMOFs creates the foundation for developing electronic applications of this promising and highly diverse class of materials., A new growth method that generates the first large planar crystals of 2D conductive metal−organic frameworks enables electrical characterization along the 2D plane.

The power of chemistry to prepare new molecules and materials has driven the quest for new approaches to solve problems having global societal impact, such as in renewable energy, healthcare and information science. In the latter case, the intrinsic quantum nature of the electronic, nuclear and spin degrees of freedom in molecules offers intriguing new possibilities to advance the emerging field of quantum information science. In this Perspective, which resulted from discussions by the co-authors at a US Department of Energy workshop held in November 2018, we discuss how chemical systems and reactions can impact quantum computing, communication and sensing. Hierarchical molecular design and synthesis, from small molecules to supramolecular assemblies, combined with new spectroscopic probes of quantum coherence and theoretical modelling of complex systems, offer a broad range of possibilities to realize practical quantum information science applications. Molecular design and synthesis, from small molecules to supramolecular assemblies, combined with new spectroscopic probes of quantum coherence and theoretical modelling, offer a broad range of possibilities to realize practical quantum information science applications in computing, communications and sensing.

Organic light-emitting diodes (OLEDs) are promising candidates for solid-state lighting but suffer from decreased efficiency at the high current density required for lighting applications. This dec...

Fair and meaningful device per- formance comparison among luminescent solar concentrator- photovoltaic (LSC-PV) reports cannot be realized without a gen- eral consensus on reporting stan- dards in LSC-PV research. There- fore, it is imperative to adopt standardized characterization protocols for these emerging types of PV devices that are consistent with other PV devices. This commentary highlights several common limitations in LSC literature and summarizes the best practices moving for- ward to harmonize with standard PV reporting, considering the greater nuances present with LSC-PV. Based on these prac- tices, a checklist of actionable items is provided to help stan- dardize the characterization/re- porting protocols and offer a set of baseline expectations for au- thors, reviewers, and editors. The general consensus combined with the checklist will ultimately guide LSC-PV research towards reliable and meaningful ad- vances.

Triplet-fusion-based photon upconversion holds promise for a wide range of applications, from photovoltaics to bioimaging. The efficiency of triplet fusion, however, is fundamentally limited in conventional molecular and polymeric systems by its spin dependence. Here, we show that the inherent tailorability of metal-organic frameworks (MOFs), combined with their highly porous but ordered structure, minimizes intertriplet exchange coupling and engineers effective spin mixing between singlet and quintet triplet-triplet pair states. We demonstrate singlet-quintet coupling in a pyrene-based MOF, NU-1000. An anomalous magnetic field effect is observed from NU-1000 corresponding to an induced resonance between singlet and quintet states that yields an increased fusion rate at room temperature under a relatively low applied magnetic field of 0.14 T. Our results suggest that MOFs offer particular promise for engineering the spin dynamics of multiexcitonic processes and improving their upconversion performance.

Silicon dominates contemporary solar cell technologies1. But when absorbing photons, silicon (like other semiconductors) wastes energy in excess of its bandgap2. Reducing these thermalization losses and enabling better sensitivity to light is possible by sensitizing the silicon solar cell using singlet exciton fission, in which two excited states with triplet spin character (triplet excitons) are generated from a photoexcited state of higher energy with singlet spin character (a singlet exciton)3–5. Singlet exciton fission in the molecular semiconductor tetracene is known to generate triplet excitons that are energetically matched to the silicon bandgap6–8. When the triplet excitons are transferred to silicon they create additional electron–hole pairs, promising to increase cell efficiencies from the single-junction limit of 29 per cent to as high as 35 per cent9. Here we reduce the thickness of the protective hafnium oxynitride layer at the surface of a silicon solar cell to just eight angstroms, using electric-field-effect passivation to enable the efficient energy transfer of the triplet excitons formed in the tetracene. The maximum combined yield of the fission in tetracene and the energy transfer to silicon is around 133 per cent, establishing the potential of singlet exciton fission to increase the efficiencies of silicon solar cells and reduce the cost of the energy that they generate. A silicon and tetracene solar cell employing singlet fission uses an eight-angstrom-thick hafnium oxynitride interlayer to promote efficient triplet transfer, increasing the efficiency of the cell.

Magnetic domain walls are information tokens in both logic and memory devices, and hold particular interest in applications such as neuromorphic accelerators that combine logic in memory. Here, we show that devices based on the electrical manipulation of magnetic domain walls are capable of implementing linear, as well as programmable nonlinear, functions. Unlike other approaches, domain-wall-based devices are ideal for application to both synaptic weight generators and thresholding in deep neural networks. Prototype micrometer-size devices operate with 8 ns current pulses and the energy consumption required for weight modulation is < 16 pJ. Both speed and energy consumption compare favorably to other synaptic nonvolatile devices, with the expected energy dissipation for scaled 20 nm devices close to that of biological neurons., 24 pages, 5 figures

Magnetic field-driven domain wall motion is investigated in closely spaced sub-100 nm wide Co nanowires. Anticorrelations appear in the spatial distribution of pinning sites within weakly interacting nanowires, with a reduced probability of pinning adjacent to another pinning site over a mean correlation length similar to the line width roughness. In contrast, strong magnetostatic interactions between domain walls in adjacent nanowires eliminate the correlations, reducing the domain wall propagation distance for a given applied magnetic field.

Volumetric optical imaging of magnetic fields is challenging with existing magneto-optical materials, motivating the search for dyes with strong magnetic field interactions, distinct emission spectra, and an ability to withstand high photon flux and incorporation within samples. Here, the magnetic field effect on singlet-exciton fission is exploited to demonstrate spatial imaging of magnetic fields in a thin film of rubrene. Doping rubrene with the high-quantum yield dye dibenzotetraphenylperiflanthene (DBP) is shown to enable optically pumped, slab waveguide lasing. This laser is magnetic-field-switchable: when operated just below the lasing threshold, application of a 0.4 T magnetic field switches the device between nonlasing and lasing modes, accompanied by an intensity modulation of +360%. This is thought to be the first demonstration of a magnetically switchable laser, as well as the largest magnetically induced change in emission brightness in a singlet-fission material to date. These results demonstrate that singlet-fission materials are promising materials for magnetic sensing applications and could inspire a new class of magneto-optical modulators.

Self-transforming structures are gaining prominence due to their general ability to adopt programmed shapes each tailored for specific functions. Composites that self-fold have so far relied on using the stimuli-responsive mechanisms focusing on reversible shape change. Integrating additional functions within these composites can rapidly enhance their practical applicability; however, this remains a challenging problem. Here, we demonstrate a method for spontaneous folding of three-dimensional (3D)-printed composites with embedded electronics at room temperature. The composite is printed using a multimaterial 3D-printing process with no external processing steps. Upon peeling from the print platform, the composite self-shapes itself using the residual forces resulting from polymer swelling during the layer-by-layer fabrication process. As a specific example, electrochromic elements are printed within the composite and can be electrically controlled through its folded legs. Our shape-transformation scheme provides a route to transform planar electronics into nonplanar geometries containing the overhangs. Integrating electronics within complex 3D shapes can enable new applications in sensing and robotics.

Emissive molecules comprising a donor and an acceptor bridged by 9,9-dimethylxanthene, were studied (XPT, XCT, and XtBuCT). The structures position the donor and acceptor with cofacial alignment at distances of 3.3-3.5 Å wherein efficient spatial charge transfer can occur. The quantum yields were enhanced by excluding molecular oxygen and thermally activated delayed fluorescence with lifetimes on the order of microseconds was observed. Although the molecules displayed low quantum yields in solution, higher quantum yields were observed in the solid state. Crystal structures revealed π-π intramolecular interactions between a donor and an acceptor, however, the dominant intermolecular interactions were C-H···π, which likely restrict the molecular dynamics to create aggregation-induced enhanced emission. Organic light emitting devices using XPT and XtBuCT as dopants displayed electroluminescence external quantum efficiencies as high as 10%.

We combine synthetic supramolecular chemistry and materials science to develop novel exciplexes for thermally activated delayed fluorescence. Our approach starts from a bowl-shaped acceptor molecule for which we synthesize tailor-made donors that bind in a lock-and-key fashion. The donor design is guided by extensive density functional theory calculations of three independent donor families. The investigation of a large number of custom-synthesized donors allows us to derive empirical relationships for the prediction of the exciplex emission color. Incorporated within organic light-emitting devices, the lock-and-key exciplexes yield external quantum efficiencies of up to 5.4%, with potentially tunable emission color across the blue and green visible spectrum., Air Force Office of Scientific Research (Grant FA9550-18-1-0341), Department of Energy (Grant DE-FG02-07ER46474), NIH (Grant GM112272)

High internal quantum efficiency semiconductor nanocrystal (NC)-based photon upconversion devices are currently based on a single monolayer of active NCs. Devices are therefore limited in their external quantum efficiency based on the low number of photons absorbed. Increasing the number of photons absorbed is expected to increase the upconversion efficiency, yet experimentally increasing the number of layers does not appreciably increase the upconverted light output. We unravel this mystery by combining kinetic modeling and transient photoluminescence spectroscopy. The inherent energetic disorder stemming from the polydispersity of the NCs means that the kinetics are governed by a stochastic transfer matrix. By drawing the rates from a probabilistic distribution and constructing a reaction network with realistic connectivity, we are able to fit complex photoluminescence traces with a very simple model. We use this model to explain the thickness-dependent performance of the upconversion devices and can attribute the reduced efficiencies to the low excitonic diffusivity of the exciton within the NC layers and increased back transfer of the created singlets from the organic annihilator rubrene. We suggest some avenues for overcoming these limitations in future devices.

Lead halide-based perovskite thin films have attracted great attention due to the explosive increase in perovskite solar cell efficiencies. The same optoelectronic properties that make perovskites ideal absorber materials in solar cells are also beneficial in other light-harvesting applications and make them prime candidates as triplet sensitizers in upconversion via triplet-triplet annihilation in rubrene. In this contribution, we take advantage of long carrier lifetimes and carrier diffusion lengths in perovskite thin films, their high absorption cross sections throughout the visible spectrum, as well as the strong spin-orbit coupling owing to the abundance of heavy atoms to sensitize the upconverter rubrene. Employing bulk perovskite thin films as the absorber layer and spin-mixer in inorganic/organic heterojunction upconversion devices allows us to forego the additional tunneling barrier owing from the passivating ligands required for colloidal sensitizers. Our bilayer device exhibits an upconversion efficiency in excess of 3% under 785 nm illumination.

We describe the red phosphorescence exhibited by a class of structurally simple benzo[2,1,3]thiadiazoles at room temperature. The photophysical properties of these molecules in deoxygenated cyclohexane, including their absorption spectra, steady-state photoluminescence and excitation spectra, and phosphorescence lifetimes, are presented. Time-dependent density functional theory (TD-DFT) calculations were carried out to better understand the electronic excited states of these benzo[2,1,3]thiadiazoles and why they are capable of phosphorescence.

The influence of the size of anti-notches on the domain wall propagation in Permalloy nanowires with edge taper is investigated. The critical magnetic fields and current pulses required for a domain wall to pass a symmetrical circular anti-notch obstacle were estimated by high-resolution in-situ Kerr microscopy experiments and by micromagnetic simulations. The nanowires, made using electron beam lithography and ion beam etching, had an average width of 220 nm and the anti-notches consisted of circular features that increased the wire width from 5% to 35%. The critical magnetic flux densities for domain walls to pass the obstacles increased with anti-notch diameter, from 0.6 mT to 3.4 mT in the simulations and 0.3 mT to 1.5 mT in the experiment. The critical current densities ranged from $0.5 \times {10^{12}}\ \text{A/m}^{2}$ to $10 \times {10^{12}}\ \text{A/m}^{2}$ in the simulations, with a strong dependence on the domain wall type, but the experiment yielded higher critical current densities of $6 \times {10^{12}}\ \text{A/m}^{2}$ to $25 \times {10^{12}}\ \text{A/m}^{2}$ .

Photon upconversion via triplet-triplet annihilation (TTA) has achieved high efficiencies in solution and within polymer matrices that support molecular migration systems. It has diverse potential applications including bioimaging, optical sensors, and photovoltaics. To date, however, the reported performance of TTA in rigid solid-state systems is substantially inferior, which may complicate the integration of TTA in other solid-state devices. Here, solid-state loss mechanisms in a green-to-blue upconversion system are investigated, and three specific losses are identified: energy back transfer, sensitizer aggregation, and triplet-charge annihilation. Strategies are demonstrated to mitigate energy back transfer and sensitizer aggregation, and a completely dry-processed solid-state TTA upconversion system having an upconversion efficiency of ≈2.5% (by the convention of maximum efficiency being 100%) at a relatively low excitation intensity of 238 mW cm-2 is reported. This device is the first demonstration of dry-processed solid-state TTA comparable to solution-processed solid-state systems. The strategies reported here can be generalized to other upconversion systems and offer a route to achieving higher-performance solid-state TTA upconversion devices that are compatible with applications sensitive to solvent damage.

By harvesting sub-bandgap photons, we have a path to overcome the Shockley-Queisser limit in photovoltaics (PVs). We investigate semiconductor nanocrystal (NC) sensitized upconversion via triplet-triplet annihilation (TTA) in organic semiconductors (OSCs). Since this process relies on optically inactive triplet states in the OSCs, we utilize PbS NCs to directly sensitize the triplet state via energy transfer. This is possible due to the strong spin-orbit coupling in PbS NCs, resulting in rapid spin-dephasing of the exciton. Current technology allows for upconversion of light with a photon energy above $\sim 1.1$ eV. However, while internal efficiencies are rapidly improving, the low external device efficiencies render them impractical for applications, as devices are based on a single monolayer of NCs. Our results show simply increasing the PbS NC film thickness does not show improvement in the efficiency due to poor exciton transport between PbS NCs. Here, we present a new strategy to increase the external upconversion efficiency by utilizing thin tinbased halide perovskites as the absorbing layer. Resonant energy transfer from the perovskite to the PbS NCs allows for subsequent sensitization of the triplet state in rubrene.

The process of upconversion leads to emission of photons higher in energy than the incident photons. Near-infrared-to-visible upconversion, in particular, shows promise in sub-bandgap sensitization of silicon and other optoelectronic materials, resulting in potential applications ranging from photovoltaics that exceed the Shockley–Queisser limit to infrared imaging. A feasible mechanism for near-infrared-to-visible upconversion is triplet–triplet annihilation (TTA) sensitized by colloidal nanocrystals (NCs). Here, the long lifetime of spin-triplet excitons in the organic materials that undergo TTA makes upconversion possible under incoherent excitation at relatively low photon fluxes. Since this process relies on optically inactive triplet states, semiconductor NCs are utilized as efficient spin mixers, absorbing the incident light and sensitizing the triplet states of the TTA material. The state-of-the-art system uses rubrene with a triplet energy of 1.14 eV as the TTA medium, and thus allows upconversion of light with photon energies above ∼1.1 eV. In this perspective, we review the field of lead sulfide (PbS) NC-sensitized near-infrared-to-visible upconversion, discuss solution-based upconversion, and highlight progress made on solid-state upconversion devices.

Lead sulphide colloidal nanocrystals offer a solid-state answer for infrared-to-visible upconversion. Optical upconversion via sensitized triplet–triplet exciton annihilation converts incoherent low-energy photons to shorter wavelengths under modest excitation intensities1,2,3. Here, we report a solid-state thin film for infrared-to-visible upconversion that employs lead sulphide colloidal nanocrystals as a sensitizer. Upconversion is achieved from pump wavelengths beyond λ = 1 μm to emission at λ = 612 nm. When excited at λ = 808 nm, two excitons in the sensitizer are converted to one higher-energy state in the emitter at a yield of 1.2 ± 0.2%. Peak efficiency is attained at an absorbed intensity equivalent to less than one sun. We demonstrate that colloidal nanocrystals are an attractive alternative to existing molecular sensitizers, given their small exchange splitting, wide wavelength tunability, broadband infrared absorption, and our transient observations of efficient energy transfer. This solid-state architecture for upconversion may prove useful for enhancing the capabilities of solar cells and photodetectors.

Thermally activated delayed fluorescence (TADF) is becoming an increasingly important OLED technology that extracts light from nonemissive triplet states via reverse intersystem crossing (RISC) to the bright singlet state. Here we present the rather surprising finding that in TADF materials that contain a mixture of donor and acceptor molecules the electron–hole separation fluctuates as a function of time. By performing time-resolved photoluminescence experiments, both with and without a magnetic field, we observe that at short times the TADF dynamics are insensitive to magnetic field, but a large magnetic field effect (MFE) occurs at longer times. We explain these observations by constructing a quantum mechanical rate model in which the electron and hole cycle between a near-neighbor exciplex state that shows no MFE and a separated polaron-pair state that is not emissive but does show magnetic field dependent dynamics. Interestingly, the model suggests that only a portion of TADF in these blends comes fr...

Charge-transfer (CT) states, bound combinations of an electron and a hole on separate molecules, play a crucial role in organic optoelectronic devices. We report direct nanoscale imaging of the transport of long-lived CT states in molecular organic donor-acceptor blends, which demonstrates that the bound electron-hole pairs that form the CT states move geminately over distances of 5-10 nm, driven by energetic disorder and diffusion to lower energy sites. Magnetic field dependence reveals a fluctuating exchange splitting, indicative of a variation in electron-hole spacing during diffusion. The results suggest that the electron-hole pair of the CT state undergoes a stretching transport mechanism analogous to an 'inchworm' motion, in contrast to conventional transport of Frenkel excitons. Given the short exciton lifetimes characteristic of bulk heterojunction organic solar cells, this work confirms the potential importance of CT state transport, suggesting that CT states are likely to diffuse farther than Frenkel excitons in many donor-acceptor blends.

Domain walls in a ferromagnetic thin film wire with rectangular cross section adopt transverse wall (TW) or vortex wall (VW) geometries depending on the magnetic material and the wire width and thickness. However, experimentally wires can have a trapezoidal cross section if they are made by liftoff using an undercut resist profile. Micromagnetic modeling shows that tapering of the wire not only promotes the formation of a TW over a VW, but also increases the critical current value and the domain wall velocity at which Walker breakdown occurs, providing a potential route to higher speed domain wall devices.

Magnetic nanowires are the foundation of several promising nonvolatile computing devices, most notably magnetic racetrack memory and domain wall logic. Here, we determine the analog information capacity in these technologies, analyzing a magnetic nanowire containing a single domain wall. Although wires can be deliberately patterned with notches to define discrete positions for domain walls, the line edge roughness of the wire can also trap domain walls at dimensions below the resolution of the fabrication process, determining the fundamental resolution limit for the placement of a domain wall. Using a fractal model for the edge roughness, we show theoretically and experimentally that the analog information capacity for wires is limited by the self-affine statistics of the wire edge roughness, a relevant result for domain wall devices scaled to regimes where edge roughness dominates the energy landscape in which the walls move.

Hybrid interfaces combining inorganic and organic materials underpin the operation of many optoelectronic and photocatalytic systems and allow for innovative approaches to photon up- and down-conversion. However, the mechanism of exchange-mediated energy transfer of spin-triplet excitons across these interfaces remains obscure, particularly when both the macroscopic donor and acceptor are composed of many separately interacting nanoscopic moieties. Here, we study the transfer of excitons from colloidal lead sulfide (PbS) nanocrystals to the spin-triplet state of rubrene molecules. By reducing the length of the carboxylic acid ligands on the nanocrystal surface from 18 to 4 carbon atoms, thinning the effective ligand shell from 13 to 6 Å, we are able to increase the characteristic transfer rate by an order of magnitude. However, we observe that the energy transfer rate asymptotes for shorter separation distances (≤10 Å) which we attribute to the reduced Dexter coupling brought on by the increased effective dielectric constant of these solid-state devices when the aliphatic ligands are short. This implies that the shortest ligands, which hinder long-term colloidal stability, offer little advantage for energy transfer. Indeed, we find that hexanoic acid ligands are already sufficient for near-unity transfer efficiency. Using nanocrystals with these optimal-length ligands in an improved solid-state device structure, we obtain an upconversion efficiency of (7 ± 1)% with excitation at λ = 808 nm.

A new donor–acceptor iptycene containing carbazole donors and a thiadiazoloquinoxaline acceptor was synthesized and its photo‐ and electrochemical properties evaluated. The key intermediate 1 allows a lateral modification through cross‐coupling, and the (triisopropylsilyl)acetylene product 2 exhibits bright yellow fluorescence with emission lifetimes of 2.42 µs in deoxygenated hexane. The long lifetime and high quantum efficiency (73 %) is quenched by O₂ and therefore attributed to thermally activated delayed fluorescence (TADF). This approach allows functionalization through cross‐coupling reactions and depicts a promising scaffold for the synthesis of TADF‐active molecules.Keywords: Functional organic materials; Fluorescence; Donor–acceptor systems; Iptycenes; Cross-coupling

Multiexcited‐state phenomena are believed to be the root cause of two exigent challenges in organic light‐emitting diodes; namely, efficiency roll‐off and degradation. The development of novel strategies to reduce exciton densities under heavy load is therefore highly desirable. Here, it is shown that triplet exciton lifetimes of thermally activated delayed‐fluorescence‐emitter molecules can be manipulated in the solid state by exploiting intermolecular interactions. The external heavy‐atom effect of brominated host molecules leads to increased spin–orbit coupling, which in turn enhances intersystem crossing rates in the guest molecule. Wave function overlap between the host and the guest is confirmed by combined molecular dynamics and density functional theory calculations. Shorter triplet exciton lifetimes are observed, while high photoluminescence quantum yields and essentially unaltered emission spectra are maintained. A change in the intersystem crossing rate ratio due to increased dielectric constants leads to almost 50% lower triplet exciton densities in the emissive layer in the steady state and results in an improved onset of the photoluminescence quantum yield roll‐off at high excitation densities. Efficient organic light‐emitting diodes with better roll‐off behavior based on these novel hosts are fabricated, demonstrating the suitability of this concept for real‐world applications., United States. Department of Energy (Grant DE‐FG02‐07ER46474)

Singlet exciton fission is a mechanism that could potentially enable solar cells to surpass the Shockley-Queisser efficiency limit by converting single high-energy photons into two lower-energy triplet excitons with minimal thermalization loss. The ability to make use of singlet exciton fission to enhance solar cell efficiencies has been limited, however, by the sparsity of singlet fission materials with triplet energies above the bandgaps of common semiconductors such as Si and GaAs. Here, we employ a high-throughput virtual screening procedure to discover new organic singlet exciton fission candidate materials with high-energy (>1.4 eV) triplet excitons. After exploring a search space of 4482 molecules and screening them using time-dependent density functional theory, we identify 88 novel singlet exciton fission candidate materials based on anthracene derivatives. Subsequent purification and characterization of several of these candidates yield two new singlet exciton fission materials: 9,10-dicyanoanthracene (DCA) and 9,10-dichlorooctafluoroanthracene (DCOFA), with triplet energies of 1.54 eV and 1.51 eV, respectively. These materials are readily available and low-cost, making them interesting candidates for exothermic singlet exciton fission sensitization of solar cells. However, formation of triplet excitons in DCA and DCOFA is found to occur via hot singlet exciton fission with excitation energies above ∼3.64 eV, and prominent excimer formation in the solid state will need to be overcome in order to make DCA and DCOFA viable candidates for use in a practical device.

A parallel deterministic global optimization algorithm for thin-film multilayer optical coatings is developed. This algorithm enables locating a global solution to an optimization problem in this class to within a user-specified tolerance. More specifically, the algorithm is a parallel branch-and-bound method with applicable bounds on the merit function computed using Taylor models. This study is the first one, to the best of our knowledge, to attempt guaranteed global optimization of this important class of problems, thereby providing an overview and an assessment of the current state of such techniques in this domain. As a proof of concept on a small scale, the method is illustrated numerically and experimentally in the context of antireflection coatings for silicon solar cells—we design and fabricate a three-layer dielectric stack on silicon that exhibits an average reflectance of (2.53 ± 0.10)%, weighted over a broad range of incident angles and the solar spectrum. The practicality of our approach is assessed by comparing its computational cost relative to traditional stochastic global optimization techniques which provide no guarantees on their solutions. While our method is observed to be significantly more computationally expensive, we demonstrate via our proof of concept that it is already feasible to optimize sufficiently simple practical problems at a reasonable cost, given the current accessibility of cloud computing resources. Ongoing advances in distributed computing are likely to bring more design problems within the reach of deterministic global optimization methods, yielding rigorous guaranteed solutions in the presence of practical manufacturing constraints.

Singlet exciton fission, a process that generates two excitons from a single photon, is perhaps the most efficient of the various multiexciton-generation processes studied to date, offering the potential to increase the efficiency of solar devices. But its unique characteristic, splitting a photogenerated singlet exciton into two dark triplet states, means that the empty absorption region between the singlet and triplet excitons must be filled by adding another material that captures low-energy photons. This has required the development of specialized device architectures. In this Account, we review work to develop devices that harness the theoretical benefits of singlet exciton fission. First, we discuss singlet fission in the archetypal material, pentacene. Pentacene-based photovoltaic devices typically show high external and internal quantum efficiencies. They have enabled researchers to characterize fission, including yield and the impact of competing loss processes, within functional devices. We review in situ probes of singlet fission that modulate the photocurrent using a magnetic field. We also summarize studies of the dissociation of triplet excitons into charge at the pentacene-buckyball (C60) donor-acceptor interface. Multiple independent measurements confirm that pentacene triplet excitons can dissociate at the C60 interface despite their relatively low energy. Because triplet excitons produced by singlet fission each have no more than half the energy of the original photoexcitation, they limit the potential open circuit voltage within a solar cell. Thus, if singlet fission is to increase the overall efficiency of a solar cell and not just double the photocurrent at the cost of halving the voltage, it is necessary to also harvest photons in the absorption gap between the singlet and triplet energies of the singlet fission material. We review two device architectures that attempt this using long-wavelength materials: a three-layer structure that uses long- and short-wavelength donors and an acceptor and a simpler, two-layer combination of a singlet-fission donor and a long-wavelength acceptor. An example of the trilayer structure is singlet fission in tetracene with copper phthalocyanine inserted at the C60 interface. The bilayer approach includes pentacene photovoltaic cells with an acceptor of infrared-absorbing lead sulfide or lead selenide nanocrystals. Lead selenide nanocrystals appear to be the most promising acceptors, exhibiting efficient triplet exciton dissociation and high power conversion efficiency. Finally, we review architectures that use singlet fission materials to sensitize other absorbers, thereby effectively converting conventional donor materials to singlet fission dyes. In these devices, photoexcitation occurs in a particular molecule and then energy is transferred to a singlet fission dye where the fission occurs. For example, rubrene inserted between a donor and an acceptor decouples the ability to perform singlet fission from other major photovoltaic properties such as light absorption.