Search

We report on the characterization of an AC-coupled, double-sided silicon strip detector, with fast binary readout electronics, in a pion beam before and after proton irradiation. The proton irradiation was non-uniform and to increase the damage the detector was heated to accelerate the anti-annealing. The effective radiation level was about 1 x [10.sup.14] p/[cm.sup.2]. Both the bias voltage of the detector and the threshold of the discriminator of the binary readout electronics were varied, and the efficiencies were determined. The irradiated detector clearly shows the effect of bulk inversion. The binary system proved to be efficient well below the full depletion voltage on the p-n junction side. Due to the highly non-uniform irradiation, the depletion voltage changes from close to zero to about 120V along a single strip, but the detector appears to work without any noticeable failures.

We report the results of a beam test at KEK using double-sided AC-coupled silicon microstrip detectors with binary readout, i.e., a readout where the signals are discriminated in the front-end electronics and only the hit location as kept. For strip pitch between 50[Mu] and 200[Mu], we determine the efficiency and the noise background as function of threshold setting. This allows us to reconstruct the Landau pulse height spectrum and determine the signal/noise ratio. In addition, the threshold/noise ratio necessary for operation with low occupancy is determined.