129 results on '"Maeder X"'
Search Results
2. Microstructure formation in micron-scale thin-walled Hastelloy X samples fabricated with laser powder bed fusion
3. Influence of wall thickness on microstructure and mechanical properties of thin-walled 316L stainless steel produced by laser powder bed fusion
4. Fabrication of FeMnSi-based shape memory alloy components with graded-microstructures by laser powder bed fusion
5. Structural characterisation of Cu-Zr thin film combinatorial libraries with synchrotron radiation at the limit of crystallinity
6. In-situ and ex-situ microstructure studies and dislocation-based modelling for primary creep regeneration response of 316H stainless steel
7. Ultrastrong nanocrystalline binary alloys discovered via high-throughput screening of the CoCr system
8. Primary creep regeneration in 10%Cr martensitic steel: In-situ and ex-situ microstructure studies
9. Combining alloy and process modification for micro-crack mitigation in an additively manufactured Ni-base superalloy
10. An exploratory study on strengthening and thermal stability of magnetron sputtered W nanoparticles at the interface of Cu/Ni multilayer films
11. Novel micro-scale specimens for mode-dependent fracture testing of brittle materials: A case study on GaAs single crystals
12. Microstructure-driven strengthening of TiB2 coatings deposited by pulsed magnetron sputtering
13. The formation of a homogeneous α-alumina coating on a Ni-based superalloy from a layer stack deposited by cathodic arc evaporation
14. Residual stress and adhesion of thermal spray coatings: Microscopic view by solidification and crystallisation analysis in the epitaxial CoNiCrAlY single splat
15. The brittle-ductile transition of tungsten single crystals at the micro-scale
16. Stress induced martensite variants revealed by in situ high resolution electron backscatter diffraction (HR-EBSD)
17. Synthesis and characterization of superalloy coatings by cathodic arc evaporation
18. Comparison of in-situ oxide formation and post-deposition high temperature oxidation of Ni-aluminides synthesized by cathodic arc evaporation
19. Microstructure formation in micron-scale thin-walled Hastelloy X samples fabricated with laser powder bed fusion
20. On the nucleation and growth of {[formula omitted]} twin in commercial purity titanium: In situ investigation of the local stress field and dislocation density distribution
21. High resolution determination of local residual stress gradients in single- and multilayer thin film systems
22. On the origins of hardness of Cu–TiN nanolayered composites
23. A comparative study of microstructural stability and sulphur diffusion in CdS/CdTe photovoltaic devices
24. Phase formation in cathodic arc synthesized Al–Hf and Al–Hf–O coatings during high temperature annealing in ambient air
25. Surface layer evolution caused by the bombardment with ionized metal vapor
26. Thin silicon films synthesis by AIC on ONO coated metal foils
27. In situ electron backscatter diffraction (EBSD) during the compression of micropillars
28. Microstructure and lattice bending in polycrystalline laser–crystallized silicon thin films for photovoltaic applications
29. Enhancing the insulating and dielectric properties of barrier anodic Al2O3 on high purity aluminum
30. Quantized nanolaminates: investigation of a novel type of meta materials deposited by magnetron sputtering
31. Microstructural and mechanical properties of hyper-deformed surfaces: In-situ micro-pillar compression and EBSD investigations in α-iron
32. A new push-pull sample design for microscale mode 1 fracture toughness measurements under uniaxial tension
33. EBSD investigation of microstructure refinement by impact-based surface treatments
34. Novel In-situ TKD Nano-tensile Testing: Insights into Nanoscale Crystal Plasticity and Grain Boundary Mechanics
35. UV coatings using Ta2O5-SiO2 quantized nanolaminates
36. In Situ Testing of Ultrathin Diffusion Barriers using Complex Multishell Nanowires.
37. On the nucleation and growth of {112¯2} twin in commercial purity titanium: In situ investigation of the local stress field and dislocation density distribution
38. A new push‐pull sample design for microscale mode 1 fracture toughness measurements under uniaxial tension.
39. Extended domains of organized nanostructures and study of their physical properties
40. Solar cells from crystalline silicon on glass made by laser crystallised seed layers and subsequent solid phase epitaxy
41. Extended domains of organised metallic nanoparticles and study of their physical properties
42. Extended domains of organised metallic nanodots and study of their physical properties
43. The european project HIGH-EF: Multicrystalline silicon thin film solar cells on glass
44. Improved test setup for MEMS mechanical strength investigations and fabrication process qualification
45. Mesure par extrusion capillaire de la consistance d'un mélange de farines de pois et de soja en présence d'additifs technologiques
46. Improved test setup for MEMS mechanical strength investigations and fabrication process qualification.
47. Quantitative stress/strain mapping during micropillar compression
48. Placenta Perfusion System: a human ex vivo model system to study the maternal – fetal barrier
49. Computational and experimental study of crack initiation in statistical volume elements
50. Residual stress and adhesion of thermal spray coatings: microscopic view by solidification and crystallisation analysis in the epitaxial CoNiCrAlY single splat
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.