Search

The merger of open-shell and closed-shell organometallic chemistry steps has enabled multiple effective cross-coupling pathways. Here we report a visible-light promoted photoredox-cobalt catalyzed Minisci reaction of N-heteroarenes under mild and sustainable conditions, employing various boronic acids and derivatives as alkyl radical precursors. This study demonstrates the prominent ability of the Co co-catalyst to promote the oxidation step of the photocatalytic cycle following a reductive quenching pathway, thus avoiding the use of stoichiometric (inorganic) oxidants. This feature enables the straightforward application of photo-flow conditions, particularly attractive for an easy scale-up and to enhance the efficiency of the reaction (throughput: 0.78 mmol/h in flow vs 0.02 mmol/h in batch) Furthermore, the process is predominantly selective towards the C2-alkylation of quinolines, and a mechanistic rationale has been provided with both experimental and DFT calculation support. The developed protocol demonstrates broad applicability for the alkylation of different N-heteroarenes under suitable homogeneous conditions for a flow-compatible Minisci reaction.

The optimization of multicomponent emissive layer (EML) deposition by slot-die coating for organic light-emitting diodes (OLEDs) is presented. In the investigated EMLs, the yellow-green iridium complex (Ir) was doped in two types of host: a commonly used mixture of poly(N-vinylcarbazole) (PVK) with oxadiazole derivative (PBD) or PVK with thermally activated delayed fluorescence-assisted dopant (10-(4-(4,6-diphenyl-1,3,5-triazin-2-yl)phenyl)-10H-spiro[acridine-9,9'-fluorene], SpiroAC-TRZ). In this article, OLEDs with EML prepared in air by slot-die coating, facilitating industrial manufacturing, are confronted with those with spin-coated EML in nitrogen. OLEDs based on PVK:PBD + 2 wt.% Ir-dopant exhibit comparable performance: ~13 cd A-1, regardless of the used method. The highest current efficiency (21 cd A-1) is shown by OLEDs based on spin-coated PVK with 25 wt.% SpiroAC-TRZ and 2 wt.% Ir-dopant. It is three times higher than the efficiency of OLEDs with slot-die-coated EML in air. The performance reduction, connected with the adverse oxygen effect on the energy transfer from TADF to emitter molecules, is minimized by the rapid EML annealing in a nitrogen atmosphere. This post-treatment causes more than a doubling of the OLED efficiency, from 7 cd A-1 to over 15 cd A-1. Such an approach may be easily implemented in other printing techniques and result in a yield enhancement. ispartof: POLYMERS vol:14 issue:16 ispartof: location:Switzerland status: published

ispartof: ACS CATALYSIS vol:11 issue:17 pages:10862-10870 status: published

The potential of using atmospheric-pressure spark ablation for production of atomic clusters has been shown in the recent past. In this study we used this method to produce atomic clusters in Argon and investigated their chemical composition with an atmospheric pressure interface time-of-flight mass spectrometer (APi-TOF-MS). Both anionic and cationic silver and gold clusters were generated and characterised. The carrier gas was used directly from the gas cylinder without the application of any additional gas purification. As a result, the carrier gas stream contained trace impurities of N2, O2, and H2O, as well as radicals such as O, OH, and H and their ionized forms resulting from the plasma created by the sparks. The experimental results show that different reactivities towards oxygen and water traces can be observed depending on the number of metal atoms in the clusters, their polarity, as well as their compositions; e.g., Aun− shows less reactive behaviour towards oxygen and hydrogen compared to Agn−. The results also show that certain cluster types can be generated at large enough quantities by atmospheric-pressure spark ablation, which considering the low installation and operating cost of the technique can pave the way towards its exploitation for numerous technological applications.

Protein-encased chromophores that photosensitize the production of reactive oxygen species, ROS, have been the center of recent activity in studies of oxidative stress. One potential attribute of such systems is that the local environment surrounding the chromophore, and that determines the chromophore's photophysics, ideally remains constant and independent of the global environment into which the system is placed. Therefore, a protein-encased sensitizer localized in the mitochondria would arguably have the same photophysics as that protein-encased sensitizer at the plasma membrane, for example. One thus obtains a useful tool to study processes modulated by spatially localized ROS. One ROS of interest is singlet oxygen, O-2(a(1)Delta(g)). We recently developed a singlet oxygen photosensitizing protein, SOPP, in which flavin mononucleotide, FMN, is encased in a re-engineered light-oxygen-voltage protein. One goal was to ascertain how a version of this system, SOPP3, which selectively makes O-2(a(1)Delta(g)), in vitro, behaves in a cell. We now demonstrate that SOPP3 undergoes exacerbated irradiation-mediated bleaching when expressed at either the plasma membrane or mitochondria in stable cell lines. We find that the environment around the SOPP3 system affects the bleaching rate, which argues against one of the key suppositions in support of a protein-encased chromophore.

Inter- and intra-molecular crosslinks can generate protein dysfunction, and are associated with protein aggregate accumulation in aged and diseased tissues. Crosslinks formed between multiple amino acid side chains can be reversible or irreversible. Disulfides formed either enzymatically, or as a result of oxidant-mediated reactions, are a major class of reversible crosslinks. Whilst these are commonly generated via oxidation of Cys thiol groups, they are also formed by ‘oxidant-mediated thiol-disulfide reactions’ via initial disulfide oxidation to a thiosulfinate or zwitterionic peroxide, and subsequent reaction with another thiol including those on other proteins. This generates new intermolecular protein-protein crosslinks. Here we demonstrate that photooxidation, or reaction with the biological oxidants HOCl and ONOOH, of the single disulfide present in the major human plasma inflammatory protein, C-reactive protein (CRP) can give rise to reversible disulfide bond formation with human serum albumin (HSA). This occurs in an oxidant dose-, or illumination-time-, dependent manner. These CRP-HSA crosslinks are formed both in isolated protein systems, and in fresh human plasma samples containing high, but not low, levels of CRP. The inter-protein crosslinks which involve Cys36 of CRP and Cys34 of HSA, have been detected by both immunoblotting and mass spectrometry (MS). The yield of protein-protein crosslinks depends on the nature and extent of oxidant exposure, and can be reversed by dithiothreitol and tris(2-carboxyethyl)phosphine hydrochloride. These data indicate that oxidation of disulfide bonds in proteins can be a source of novel inter-protein crosslinks, which may help rationalize the accumulation of crosslinked proteins in aged and diseased tissues., Graphical abstract Image 1, Highlights • C-reactive protein (CRP) is a major acute phase inflammatory protein in human plasma. • Oxidation of the single Cys36-Cys97 disulfide in CRP generates reactive intermediates. • The oxidized disulfide reacts with Cys34 of human serum albumin to forms a new crosslink. • The inter-protein CRP-HSA crosslink has been characterized by immunoblotting and LS-MS/MS. • This novel crosslink may be a long-lived plasma marker of inflammation-induced damage.

The kinetics of the i -C 4 H 5 (buta-1,3-dien-2-yl) radical reaction with molecular oxygen has been measured over a wide temperature range (275-852 K) at low pressures (0.8-3 Torr) in direct, time-resolved experiments. The measurements were performed using a laminar flow reactor coupled to photoionization mass spectrometer (PIMS), and laser photolysis of either chloroprene (2-chlorobuta-1,3-diene) or isoprene was used to produce the resonantly stabilized i -C 4 H 5 radical. Under the experimental conditions, the measured bimolecular rate coefficient of i -C 4 H 5 + O 2 reaction is independent of bath gas density and exhibits weak, negative temperature dependency, and can be described by the expression k 3 = (1.45 +/- 0.05) & times; 10 & minus;12 & times; ( T /298 K) & minus;(0.13 +/- 0.05) cm 3 s & minus;1 . The measured bimolecular rate coefficient is surprisingly fast for a resonantly stabilized radical. Under combustion conditions, the reactions of i -C 4 H 5 radical with ethylene and acetylene are believed to play an important role in forming the first aromatic ring. However, the current measurements show that i C 4 H 5 + O 2 reaction is significantly faster under combustion conditions than previous estimations suggest and, consequently, inhibits the soot forming propensity of i -C 4 H 5 radicals. The bimolecular rate coefficient estimates used for the i -C 4 H 5 + O 2 reaction in recent combustion simulations show significant variation and are up to two orders of magnitude slower than the current, measured value. All estimates, in contrast to our measurements, predict a positive temperature dependency. The observed products for the i -C 4 H 5 + O 2 reaction were formaldehyde and ketene. This is in agreement with the one theoretical study available for i C 4 H 5 + O 2 reaction, which predicts the main bimolecular product channels to be H 2 CO + C 2 H 3 + CO and H 2 CCO + CH 2 CHO. (c) 2020 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Cross-links formed within and between proteins are a major cause of protein dysfunction, and are postulated to drive the accumulation of protein aggregates in some human pathologies. Cross-links can be formed from multiple residues and can be reversible (usually sulfur-sulfur bonds) or irreversible (typically carbon-carbon or carbon-heteroatom bonds). Disulfides formed from oxidation of two Cys residues are widespread, with these formed both deliberately, via enzymatic reactions, or as a result of unintended oxidation reactions. We have recently demonstrated that new protein-glutathione mixed disulfides can be formed through oxidation of a protein disulfide to a thiosulfinate, and subsequent reaction of this species with glutathione. Here we investigate whether similar reactions occur between an oxidized protein disulfide, and a Cys residues on a second protein, to give novel protein cross-links. Singlet oxygen (1O2)-mediated oxidation of multiple proteins (α-lactalbumin, lysozyme, beta-2-microglobulin, C-reactive protein), and subsequent incubation with the Cys-containing protein glyceraldehyde-3-phosphate dehydrogenase (GAPDH), generates inter-protein cross-links as detected by SDS-PAGE, immunoblotting and mass spectrometry (MS). The cross-link yield is dependent on the 1O2 concentration, the presence of the original protein disulfide bond, and the free Cys on GAPDH. MS with 18O-labeling has allowed identification of the residues involved in some cases (e.g. Cys25 from the Cys25-Cys80 disulfide in beta-2-microglobulin, with Cys149 or Cys244 of GAPDH). The formation of these cross-links results in a loss of GAPDH enzymatic activity. These data provide ‘proof-of-concept’ for a novel mechanism of protein cross-link formation which may help rationalize the accumulation of cross-linked proteins in multiple human pathologies., Graphical abstract Image 1, Highlights • Disulfide bonds (DSBs) are critical to protein structure and function. • DSBs are rapidly oxidized by singlet oxygen and other oxidants to reactive intermediates. • These intermediates react with Cys-containing proteins to give new protein-protein cross-links. • This novel disulfide cross-linking pathway affects the functional activity of the proteins. • These cross-links can be diminished by reductants, but this does not repair the DSB damage.

Bimetallic nanoparticles (NPs) play a pivotal role in promoting high activity and selectivity towards various industrially important reactions in comparison to single metal NPs due to their modulated electronic and surface properties. Herein, we report the synthesis of non-precious CoCu NPs, which serve as an excellent catalyst for the selective oxidation of a wide range of electronically diverse benzyl alcohols to benzaldehydes, in the presence of tent-butyl hydroperoxide (TBHP) as an oxidant at room temperature. The excellent catalytic activity of CoCu NPs is ascribed to a two-fold synergistic effect arising from the combination of enhanced peroxide decomposition, active Co2+ catalyst regeneration driven by the faster redox processes (between Co3+ and Cu+), and a feasible cobalt dimerisation-regeneration process. The recoverability and reusability of CoCu NPs are also demonstrated. With the merits of low-cost and recyclable catalysis under mild conditions, the present catalyst represents an efficient and potential alternative to precious metal catalysts.

The oxidation of ferrous ions in acidic sulfate solutions at elevated air pressures was investigated. The effect of the Fe2+ concentration, initial H2SO4 concentration and partial oxygen pressure on the reaction rate were determined at three different temperatures, that is, T = 90, 70, and 50 degrees C. The effect on the reaction rate of the components that H2SO4 dissociates into, that is, HSO4-, H3O+, and SO42-, was established as well. A second order of reaction in Fe2+ and a first order of reaction in O-2 were determined. No clear order in either H2SO4 or the components H2SO4 dissociates into, could be established. For the.experiments with initial concentrations of H2SO4 of 1 M and higher the oxidation rate was not affected, that is, a zero order of reaction in H2SO4 for these concentrations. Therefore, the kinetic rate expression for the oxidation of Fe2+ at concentrations of H2SO4 of 1 M and higher can be calculated with R-Fe(2+) = d[Fe2+]/dt = k[Fe2+]P-2(O2), where the activation energy E-A was determined to be 60.3 kJ/mol.

A novel catalyst which carbon hybrid supported platinum nanoparticles were synthesized by our group for the oxidation of benzyl alcohol derivatives. In this study, this catalyst was utilized for the oxidation of benzyl alcohol derivatives to benzaldehyde compounds in aqueous toluene at 80 degrees C. The benzaldehyde derivatives were synthesized in high yields and mild conditions in the presence of the catalyst by the developed method. Additionally, the prepared nanoparticles have been characterized by Transmission Electron Microscopy (TEM), the high-resolution electron micrograph (HR-TEM), X-ray Photoelectron Spectroscopy (XPS), and X-ray Diffraction (XRD). The mean particle size of the nanoparticles determined by the XRD technique was found to be 2.83 nm in parallel with TEM analysis. TEM analysis also indicated that the Pt nanoparticles were evenly dispersed on the support material. Finally, the Pt@CHs catalyst was shown also stable and reusable for the oxidation reaction, providing

© 2018 The Authors A flat membrane microchannel reactor was designed and demonstrated for the safe and scalable oxidation of solvent-free benzyl alcohol with molecular oxygen on Au-Pd/TiO2 catalyst. The microchannel reactor employed a mesh-supported Teflon AF-2400 membrane, with gas and liquid channels on each side. Catalyst particles were packed in the liquid flow channel. Operation with 20 bara pressure difference between the gas and the liquid phases was possible at 120 °C. Pervaporation of organics through the membrane was experimentally measured to ensure that the organic vapour concentration remained below the lower flammability limit during the reaction. High oxygen pressure was shown to have a positive effect on reactor performance. A conversion of benzyl alcohol of 70% with 71% selectivity to benzaldehyde was obtained at 1150 gcat·s/galcohol, 8.4 bara oxygen pressure and 10 bara liquid pressure. The oxygen consumption rate was not significantly decreased when doubling the membrane thickness, indicating that the membrane generated only low resistance to oxygen mass transfer. When changing the catalyst particle size and the liquid flow rate, no significant effect was observed on the oxidation reaction rate. An effectiveness factor approach is proposed to assess the effect of oxygen permeation and transverse mass transfer on the catalyst packed in the membrane reactor, which suggests that the oxidation of benzyl alcohol on the highly active Au-Pd/TiO2 catalyst is controlled by the oxygen transverse mass transfer in the bulk liquid within the catalyst bed. Scale-up of the flat membrane microchannel reactor was demonstrated through increasing the liquid channel width by approximately ten times, which increased the reactor productivity by a factor of eight. ispartof: CHEMICAL ENGINEERING JOURNAL vol:377 ispartof: location:ITALY, Florence status: published

Manganese porphyrins are of interest due to the optical, electronic and magnetic properties of the central metal ion, coupled to the low bandgap of the polyaromatic ring. These attractive characteristics are harnessed in solutions or in ultra-thin films, such as, for example, self-assembled monolayers. However, for devices, thicker films deposited using a controlled and reproducible method are required. Here we present the morphological, structural, chemical and optical properties of manganese(III) tetraphenylporphyrin chloride (MnTPPCl) thin films deposited using organic molecular beam deposition, typically employed to process analogue molecules for applications such as organic photovoltaics. We find, using a combination of UV-vis and X-ray photoelectron spectroscopies, that the sublimation process leads to the scission of the Mn–Cl bond. The resultant film is a Mn(II)TPP:Mn(III)TPPCl blend where approximately half the molecules have been reduced. Following growth, exposure to air oxidizes the Mn(II)TPP molecule. Through quantitative analysis of the time-dependent optical properties, the oxygen diffusion coefficient (D) [Formula: see text] is obtained, corresponding to a slow bulk oxidation following fast oxidation of a 8-nm-thick surface layer. The bulk diffusion D is lower than for analogous polycrystalline films, suggestion that grain boundaries, rather than molecular packing, are the rate-limiting steps in oxidation of molecular films. Our results highlight that the stability of the axial ligands should be considered when depositing metal porphyrins from the vapor phase, and offer a solvent-free route to obtain reproducible and smooth thin films of complex materials for engineering film functionalities.

Baeyer-Villiger monooxygenases (BVMOs) and evolved mutants have been shown to be excellent biocatalysts in many stereoselective Baeyer-Villiger transformations, but industrial applications are rare which is partly due to the insufficient thermostability of BVMOs under operating conditions. In the present study, the substrate scope of the recently discovered thermally stable BVMO, TmCHMO from Thermocrispum municipale, was studied. This revealed that the wild-type (WT) enzyme catalyzes the oxidation of a variety of structurally different ketones with notable activity and enantioselectivity, including the desymmetrization of 4-methylcyclohexanone (99% ee, S). In order to induce the reversal of enantioselectivity of this reaction as well as the transformations of other substrates, directed evolution based on iterative saturation mutagenesis (ISM) was applied, leading to (R)-selectivity (94% ee) without affecting the thermostability of the biocatalyst.

International audience; Manganese(III) acetate-mediated peroxycyclization between 2-hydroxy-3-methylnaphthoquinone and various alkenes was performed to obtain dihydronaphtho[2,3-c][1,2] dioxine-5,10(3H, 10aH)-diones. The reactivity of symmetrical or unsymmetrical 1,1-disubstituted alkenes and monosubstituted alkenes allowed the synthesis of more than 50 original molecules. Focusing on the excellent reactivity of 2-hydroxy-3-methylnaphthoquinone, we describe the first example of Mn(OAc)(3) reactivity with nitro-substituted alkenes. The scope, limitations and stereochemistry of the products synthesized are discussed. Starting from monosubstituted alkenes, the instability of a pair of diastereoisomers was observed, leading to ring opening.

A dual mechanism for direct benzene catalytic hydroxylation is described. Experimental studies and DFT calculations have provided a mechanistic explanation for the acid-free, TpxCu-catalyzed hydroxylation of benzene with hydrogen peroxide (Tpx = hydrotrispyrazolylborate ligand). In contrast with other catalytic systems that promote this transformation through Fenton-like pathways, this system operates through a copper-oxyl intermediate that may interact with the arene ring following two different, competitive routes: (a) electrophilic aromatic substitution, with the copper-oxyl species acting as the formal electrophile, and (b) the so-called rebound mechanism, in which the hydrogen is abstracted by the Cu–O moiety prior to the C–O bond formation. Both pathways contribute to the global transformation albeit to different extents, the electrophilic substitution route seeming to be largely favoured., We thank MINECO for Grants CTQ2014-52769-C3-1-R and CTQ2014-54071-P and COST Action CARISMA CM1205. D. B. acknowledges the support from the Norwegian Research Council through the Centre of Excellence for Theoretical and Computational Chemistry (CTCC; grant No. 179568/V30), the Norwegian Metacenter for Computational Science (NOTUR; grant nn4654k) and the EU Research Executive Agency for a Marie Curie Fellowship (grant CompuWOC/618303). We also thank CATEDRA CEPSA-UHU for nancial support.

A series of 2,3-disubstituted-4(3H)-quinazolinones were synthesised via a copper-catalysed C-sp3-H functionalisation/cyclisation of 2-amino-N, N-dialkylbenzamides. In comparison to the reported methods this strategy allows an easy access to diversely substituted quinazolinones under mild conditions in air. The reaction also exhibits good functional group tolerance and would be of value to heterocyclic researchers as well as pharmaceutical process chemists. The reaction is proposed to proceed through a double SET type radical mechanism.

Oxidation of cyclohexane has been carried out using molecular oxygen over cobalt molybdenum oxide (CoMoO4) catalysts in solvent free conditions. The catalysts were prepared using citrate method with three different molar ratios of Co:Mo, 1:1, 1:2, and 2:1 along with individual oxides for comparative studies. While all the catalysts showed significant activity and selectivity, CoMoO4 with 1:1 ratio showed the best performance compared to the others with a conversion of 7.38%, with selectivity to cyclohexanol and cyclohexanone (KA oil) of 94.3%, in 1h. The performance of the catalyst, has been studied as a function of oxygen pressure, reaction temperature, and catalyst loading. It was observed that the catalyst deactivates during the course of the reaction. The reasons for deactivation and methods for restoring the activity have been studied. A kinetic model is presented that captures the complex kinetics and matches well with the experimental data. (c) 2016 American Institute of Chemical Engineers AIChE J, 62: 4384-4402, 2016

A mimic of the Wacker process for C=O bond formation in terminal olefins can be initiated by a combination of the Pd(II) and hypervalent iodine reagent, Dess-Martin periodinane to generate methyl ketones. This operationally simple and scalable method offers Markovnikov selectivity, has good functional group compatibility, and is mild and high yielding.

Alkyne C≡C bond breaking, outside of alkyne metathesis, remains an underdeveloped area in reaction discovery. Recently, nitrogenation has been reported to allow nitrile formation from alkynes. A new protocol for the metal-free C≡C bond cleavage of terminal alkynes to produce nitriles is reported. This method provides an opportunity to synthesize a vast range of nitriles containing aryl, heteroaryl, and natural product derivatives (38 examples). In addition, the potential of (t)BuONO to act as a powerful nitrogenating agent for terminal aryl alkynes is demonstrated.

© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim Graphene's sensitivity to adsorbed particles has attracted widespread attention because of its potential sensor applications. Size-selected few-atom clusters are promising candidates as adparticles to graphene. Due to their small size, physicochemical properties are dominated by quantum size effects. In particular, few-atom gold clusters demonstrate a significant catalytic activity in various oxidation reactions. In this joint experimental and computational work, size-selected gold clusters with 3 and 6 atoms adsorbed on graphene field-effect transistors and their interaction with molecular oxygen are investigated. While oxygen adsorbs at both cluster sizes, there is a pronounced cluster size dependence in the corresponding doping, as demonstrated via first-principle calculations and electronic transport measurements. Furthermore, the doping of gold cluster decorated graphene changes sign from n- to p-doping upon oxygen adsorption, directly evidencing electron transfer to the oxygen molecules and hence their activation. These observations pinpoint graphene as a valuable platform to investigate and exploit size-dependent cluster properties. ispartof: ADVANCED MATERIALS INTERFACES vol:5 issue:24 status: published

Cellulose/silica hybrid material produced by a sol-gel method from cellulosic fibres and silica precursors (tetraethoxysilane and 3-aminopropyltriethoxysilane) was functionalized with alpha-[SiW9O37Ru3III(H2O)(x)Cl3-x]((10-x)-) (Ru-POM), and thoroughly characterised by C-13 and Si-29 solid state NMR, FTIR spectroscopy, UV-vis reflectance spectroscopy, X-ray diffraction, thermogravimetric analysis, scanning electron microscopy (SEM), and chemical analysis. The supported Ru-POM exhibited catalytic activity for the gas phase heterogeneous aerobic oxidation of formaldehyde (ca. 830 ppm in polluted air) at room temperature, in a packed-bed reactor operating at a linear velocity ca. 0.33 m/s and ca. 0.5 s residence time. Maximum formaldehyde uptake was 1.10 g/min per kg of hybrid material doped with Ru-POM (ca. 1.4% w/w). More than 400 turnovers were achieved without significant loss of catalytic activity and the only detected oxidation products of formaldehyde were carbon dioxide and water. A plausible mechanism for the catalytic oxidation of formaldehyde by supported Ru-POM has been proposed and includes formaldehyde oxidation in oxygenated ruthenium complex. (C) 2015 Elsevier B.V. All rights reserved.

Incorporation of facilitating agents is one of the promising strategies being researched in recent years to cross the Robeson bounds for gas separations using polymeric membranes. The ways in which such inclusions modify the performance of membranes are not always clear. Here, we study the performance of two glassy membranes, Polyfurfuryl alcohol and Polysulfone, in O-2/N-2 and CO2/N-2 separations, with Cobalt phthalocyanine in insoluble and solubilized forms as the facilitating agent. The results show that in general, three effects are important: (1) a barrier effect, (2) a facilitation effect, and (3) morphological effects on the polymer matrix due to an incompatibility between the particles and the polymer. These results provide some insight into the action of facilitating agents in soluble and insoluble form, when used as membrane additives. (c) 2017 American Institute of Chemical Engineers AIChE J, 63: 186-199, 2018

Mononuclear discrete cobalt phosphonate [Co(pytpy)(tBuPO(3)H)(2)(H2O)]center dot H2O (1) and 1D zigzag polymeric cobalt phosphate [Co(pytpy)(2)(dipp)(MeOH)center dot 2MeOH](n) (2) were prepared from the reactions of tert-butyl phosphonic acid (tBuPO(3)H(2)) and organic-soluble 2,6-diisopropylphenyl phosphate (dippH(2)) ligands with Co(OAc)(2)center dot 4H(2)O in the presence of 4'-pyridyl 2,2':6',2 ''-terpyridine in MeOH/CHCl3(1:1 v/v) solvent mixture at 25 degrees C. The new compounds were characterized by analytical, thermo-analytical, and spectroscopic techniques. Further, the molecular structures were established by single-crystal X-ray diffraction studies. Mass spectrometry analysis reveal that both the compounds exist in the solution phase as dimers. Compound 1 was employed as homogeneous catalysts for alcohol oxidation reactions using tert-butyl hydroperoxide (TBHP) as the oxidant.

Reaction of [Pd(IPr)(2)] (IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) and O-2 leads to the surprising discovery that at low temperature the initial reaction product is a highly labile peroxide complex cis-[Pd(IPr)(2)(eta(2)-O-2)]. At temperatures greater than or similar to -40 degrees C, cis-[Pd(IPr)(2)(eta(2)-O-2)] adds a second O-2 to form trans-[Pd(IPr)(2)(eta(1)-O-2)(2)]. Squid magnetometry and EPR studies yield data that are consistent with a singlet diradical ground state with a thermally accessible triplet state for this unique bis-superoxide complex. In addition to reaction with O-2 , cis-[Pd(IPr)(2)(eta(2)-O-2)] reacts at low temperature with H2O in methanol/ether solution to form trans-[Pd(IPr)(2)(OH)(OOH)]. The crystal structure of trans-[Pd(IPr)(2)(OOH) (OH)] is reported. Neither reaction with O-2 nor reaction with H2O occurs under comparable conditions for cis-[Pd(IMes)(2)(eta(2)-O-2)] (IMes = 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene). The increased reactivity of cis-[Pd(IPr)(2)(eta(2)-O-2)] is attributed to the enthalpy of binding of O-2 to [Pd(IPr)(2)] (-14.5 +/- 1.0 kcal/mol) that is approximately one-half that of [Pd(IMes)(2)] (-27.9 +/- 1.5 kcal/mol). Computational studies identify the cause as interligand repulsion forcing a wider C-Pd-C angle and tilting of the NHC plane in cis-[Pd(IPr)(2)(eta(2)-O-2)]. Arene-arene interactions are more favorable and serve to further stabilize. cis-[Pd(IMes)(2)(eta(2)-O-2)]. Inclusion of dispersion effects in DFT calculations leads to improved agreement between experimental and computational enthalpies of O-2 binding. A complete reaction diagram is constructed for formation of trans-[Pd(IPr)(2)(eta(1)-O-2)(2)] and leads to the conclusion that kinetic factors inhibit formation of trans-[Pd(IMes)(2)(eta(1)-O-2)(2)] at the low temperatures at which it is thermodynamically favored. Failure to detect the predicted T-shaped intermediate trans-[Pd(NHC)(2)(eta(1)-O-2)] for either NHC = IMes or IPr is attributed to dynamic effects. A partial potential energy diagram for initial binding of O-2 is constructed. A range of low-energy pathways at different angles of approach are present and blur the distinction between pure "side-on" or "end-on" trajectories for oxygen binding.

The dinuclear cyclo(metallo)phosphates [M(dipp)(Cl-terpy)](2) [M = Mn (1), Ni (2)] and the mononuclear cobalt phosphate [Co(dippH)(Cl-terpy)(MeOH)(H2O)]dippH (3) were synthesized through the reactions of 4-chloro-2,2:6,2-terpyridine (Cl-terpy) and 2,6-diisopropylphenyl phosphate (dippH(2)) with manganese, nickel, and cobalt acetates. The formation of 1-3 is supported by spectroscopic, thermogravimetric, and microanalytical data. The molecular structures of 1 and 3 were confirmed by single-crystal X-ray diffraction studies. Compounds 1 and 2 are dimeric and feature two octahedral metal centers bridged by dianionic dipp ligands. On the other hand, 3 exists as a monomer in the solid state, but dissolution in methanol converts it to a dimeric form similar to those of 1 and 2, as evidenced by ESI-MS studies. Compounds 1-3 were employed as catalysts for alcohol oxidation reactions with tert-butyl hydroperoxide (TBHP) as the oxidant. The manganese phosphate 1 exhibits better catalytic activity in terms of selectivity and substrate conversion compared with those of 2 and 3 under similar conditions.

The palladium-catalyzed oxidation of alkenes, the Wacker-Tsuji reaction, is undoubtedly a classic in organic synthesis and provides reliable access to methyl ketones from terminal alkenes under mild reaction conditions. Methods that switch the selectivity of the reaction to provide the aldehyde product are desirable because of the access they provide to a valuable functional group, however such methods are elusive. Herein we survey both the methods which have been developed recently in achieving such selectivity and discuss common features and mechanistic insight which offers promise in achieving the goal of a general method for anti-Markovnikov-selective olefin oxidations.

The palladium-catalyzed oxidation of alkenes, the Wacker-Tsuji reaction, is undoubtedly a classic in organic synthesis and provides reliable access to methyl ketones from terminal alkenes under mild reaction conditions. Methods that switch the selectivity of the reaction to provide the aldehyde product are desirable because of the access they provide to a valuable functional group, however such methods are elusive. Herein we survey both the methods which have been developed recently in achieving such selectivity and discuss common features and mechanistic insight which offers promise in achieving the goal of a general method for anti-Markovnikov-selective olefin oxidations.

Reports on aerobic oxidation of amines to amides are rare, and those reported suffer from several limitations like poor yield or selectivity and make use of pure oxygen under elevated pressure. Herein, we report a practical and an efficient ruthenium-catalyzed synthetic protocol that enables selective oxidation of a broad range of primary aliphatic, heterocyclic and benzylic amines to their corresponding amides, using readily available reagents and ambient air as the sole oxidant. Secondary amines instead, yield benzamides selectively as the sole product. Mechanistic investigations reveal intermediacy of nitriles, which undergo hydration to afford amide as the final product.

The oxidation of ferrous ions in acidic sulfate solutions at elevated air pressures was investigated. The effect of the Fe2+ concentration, Fe3+ concentration H2SO4 concentration, and partial oxygen pressure on the reaction rate were determined at three different temperatures, that is, T = 90, 70, and 50 degrees C. A second order of reaction in Fe2+ and a first order of reaction in O-2 were determined, respectively. A slight inhibition by Fe3+ on the Fe2+ oxidation reaction was observed. The reaction is first order in Fe3+ in the kinetic term for the inhibition by Fe3+. Concentrations of H2SO4 up to 1 M result in a fractional negative order of -0.6; concentrations Of H2SO4 above 1 M result in a zero order. One kinetic equation for the oxidation of Fe2+ was postulated, in which the order of reaction in H2SO4 is changed depending on the H2SO4 concentration. R-FE(2+) = -d[Fe2+]/dt = k[Fe2+]P-2(O2)[H2SO4](c)/(1 + A[Fe3+), with c = -0.6 for [H2SO4] 1 M. The activation energy was determined to be E-A = 62.1 kJ/mol. The order c in H2SO4 is either -0.6 or zero, depending on the H2SO4 concentration.

A ligand controlled catalytic system for the aerobic oxidation of 1° amines to nitriles and imines has been developed where the varying π-acidic feature of BIAN versus phen in the frameworks of ruthenium catalysts facilitates switchable selectivity.

A combination of therapies to treat cancer malignancies is at the forefront of research with the aim to reduce drug doses (ultimately side effects) and diminish the possibility of resistance emergence given the multitarget strategy. With this goal in mind, in the present study, we report the combination between the chemotherapeutic drug doxorubicin (DOXO) and the photosensitizing agent pheophorbide a (PhA) to inactivate HeLa cells. Photophysical studies revealed that DOXO can quench the excited states of PhA, detracting from its photosensitizing ability. DOXO can itself photosensitize the production of singlet oxygen; however, this is largely suppressed when bound to DNA. Photodynamic treatments of cells incubated with DOXO and PhA led to different outcomes depending on the concentrations and administration protocols, ranging from antagonistic to synergic for the same concentrations. Taken together, the results indicate that an appropriate combination of DOXO with PhA and red light may produce improved cytotoxicity with a smaller dose of the chemotherapeutic drug, as a result of the different subcellular localization, targets and mode of action of the two agents. ispartof: CANCERS vol:9 issue:2 ispartof: location:Switzerland status: published

The present work describes the application of scanning electrochemical microscopy (SECM) in the feedback mode to determine the kinetics of oxygen reduction at or near the liquid/liquid interface – between water and 1,2-dichloroethane (w/DCE). The system contained decamethylferrocene (DMFc) in DCE as the electron donor and acids in water as a proton source. In this approach, decamethylferrocenium (DMFc+) is reduced at the tip of a microelectrode in DCE and the electrogenerated DMFc reacts with protons and oxygen to be re-oxidized in a following chemical reaction (catalytic EC’ mechanism). When a high Galvani potential difference was applied across the liquid/liquid interface, protons would transfer rapidly to the organic phase. Under this condition, SECM approach curves towards the liquid/liquid interface showed dramatic current increases at distances far from the interface. This indicates that oxygen reduction takes place mainly in the bulk DCE; however, at lower Galvani potential differences, where the proton transfer is slow, oxygen reduction was also observed at the interface. Finally, SECM feedback mode measurements with the tip approaching a conductive substrate were used to determine the kinetics of the homogeneous reaction, with an obtained apparent rate constant of 0.2-0.5 m3 mol–1·s–1.

An efficient and environmentally benign method using Fe(III) sulfate as a terminal oxidant in the synthesis of methyl ketones from terminal olefins via the Wacker process is developed. The methodology offers high selectivity for a Markonikov product, shows good functional group compatibility, involves mild reaction conditions, and is operationally simple. Fe-2(SO4)(3) is the sole terminal oxidant in this process. The method holds potential for future applications in organic synthesis.

A copper-catalyzed method for synthesis of diaryl ketones (Ar-CO-Ar') through removal of benzylic -CH2-, -CO-, and -CHR- groups from Ar-CO-CXR-Ar' has been discovered. A number of symmetrical and unsymmetrical heterocyclic ketones, which are usually difficult to synthesize, can be prepared in good to excellent yields. This method was applied to the synthesis of the nonsteroidal anti-inflammatory drug suprofen (47 % yield over three steps). Based on preliminary mechanistic and kinetic studies, an active Cu/O2 species is proposed to mediate the rearrangement reaction. Carbon-carbon bonds constitute the basic foundation of synthetic chemistry. Protocols for the generation and cleavage of such bonds are indispensable for the synthesis of new organic scaffolds. Although carbon-carbon bond-formation techniques have been studied extensively, the cleavage of carbon-carbon bonds is still a difficult objective. The inert nature of the carbon-carbon bond makes its cleavage problematic, and gaining control of it is even more challeng

A mixed-ligand 3D metal-organic framework, [Ni(1,2-cpd)(bpe)(H2O)]n (1) [1,2-cpd = cis-cyclopentane-1,2-dicarboxylate, bpe = 1,2-di(4-pyridyl)ethylene], has been constructed. Topological analysis revealed that the structure is a 3-c uninodal 2D + 2D 3D polycatenated net with the Schlafli symbol 63. The compound is catalytically active towards the epoxidation reaction in heterogeneous media. It catalyses almost all types of olefinic substrates with equal efficiency. After reaction it can be recovered quite easily and can be used for further reaction without any loss of activity for several cycles. Variable-temperature magnetic susceptibility measurement reveals the presence of a weak antiferromagnetic interaction in compound 1.

In this work, Cu(II), Co(II) and Ni(II) complexes of the Schif base ((S, E)-2-(3,4-dimethoxybenzylideneamino)- 3-(1H-imidazol-4-yl) propionic acid) were synthesized and subsequently anchored onto amine functionalized silica. They were characterized by FT-IR, UV-vis., Si-29 NMR, TG-DTG, ESR, FE-SEM and AFM techniques, and employed as catalysts in cyclohexane oxidation using hydrogen peroxide oxidant. Silica supported Cu(II) catalyst was shown the highest catalytic activity (70%) than rest of the catalysts used. On the other hand, all the complexes were selective as they yield only cyclohexanol and cyclohexanone. Silica supported catalysts were maintained their catalytic activity over five successive catalytic run. As these catalysts are selective, reusable and functioning well with hydrogen peroxide, they could design the environment friendly catalytic system for effective cyclohexane oxidation.

A cascade reaction, consisting of a palladium-catalyzed regioselective aerobic oxidative carbocyclization-borylation of bisallenes and a final aldehyde trapping, afforded triene alcohols with high diastereoselectivity. The cascade reaction occurs under mild reaction conditions and proceeds via an allylboron intermediate that is trapped by the aldehyde in a stereoselective manner.

Photodynamic treatments represent a non-invasive tool to intervene in the cell cycle, only when needed, but high excitation power is an important limitation. In this work, protoporphyrin IX (PpIX) is covalently anchored to the surface of silica particles. The hybrid colloids are prepared with different photosensitizer loadings and characterized by TEM, SEM-EDX and spectroscopic methods. The visible excitation of the colloidal samples generates reactive oxygen species, which are quantified by use of a specific chemical scavenger agent (1,3-diphenylisobenzofuran). The determined efficiencies depend on the PpIX loading, being higher in the sample where the aggregation is reduced. To enhance further the photosensitizing performance of silica-PpIX samples, increasing amounts of gold nanoparticles are conjugated to the silica surface in order to exploit the antenna effect of plasmonic nanostructures. The visible excitation of silica-PpIX systems in the presence of gold nanoparticles results in a faster and more efficient photoinduced formation of ROS species reaching a 230 % enhancement of ROS photosensitization when 1013 Au nanoparticles mL−1 (corresponding to circa 75 ppm of gold) are present. The efficiency data are discussed in terms of plasmonic enhancement of the excitation field.

An overview of asymmetric transformations induced by photochemical means in the presence of a substoichiometric amount of external chiral reagent is presented. The main obstacles in achieving asymmetric induction catalytically, and successful examples of ways to overcome these hurdles are discussed.

© 2018 The Royal Society of Chemistry. Molecular oxygen is without doubt the greenest oxidant for redox reactions, yet aerobic oxidation is one of the most challenging to perform with good chemoselectivity, particularly on an industrial scale. This collaborative review (between teams of chemists and chemical engineers) describes the current scientific and operational hurdles that prevent the utilisation of aerobic oxidation reactions for the production of speciality chemicals and active pharmaceutical ingredients (APIs). The safety aspects of these reactions are discussed, followed by an overview of (continuous flow) reactors suitable for aerobic oxidation reactions that can be applied on scale. Some examples of how these reactions are currently performed in the industrial laboratory (in batch and in flow) are presented, with particular focus on the scale-up strategy. Last but not least, further challenges and future perspectives are presented in the concluding remarks. crosscheck: This document is CrossCheck deposited identifier: Simon Kuhn (ORCID) copyright_licence: The Royal Society of Chemistry has an exclusive publication licence for this journal copyright_licence: This article is freely available. This article is licensed under a Creative Commons Attribution 3.0 Unported Licence (CC BY 3.0) history: Received 30 August 2016; Accepted 13 September 2016; Advance Article published 22 September 2016; Version of Record published 22 November 2016 ispartof: Reaction Chemistry & Engineering vol:1 issue:6 pages:595-612 status: published

Fullerene-based molecules are the archetypical electron-accepting materials for organic photovoltaic devices. A detailed knowledge of the degradation mechanisms that occur in C60 layers will aid in the development of more stable organic solar cells. Here, the impact of storage in air on the optical and electrical properties of C60 is studied in thin films and in devices. Atmospheric exposure induces oxygen-trap states that are 0.19 eV below the LUMO of the fullerene C60. Moreover, oxygen causes a 4-fold decrease of the exciton lifetime in C60 layers, resulting in a 40% drop of short-circuit current from optimized planar heterojunction solar cells. The presence of oxygen-trap states increases the saturation current of the device, resulting in a 20% loss of open-circuit voltage. Design guidelines are outlined to improve air stability for fullerene-containing devices. ispartof: ACS Applied Materials and Interfaces vol:8 issue:15 pages:9798-9805 ispartof: location:United States status: published

Submitted by Fátima Piedade (fpiedade@sa.isel.pt) on 2015-09-08T13:42:59Z No. of bitstreams: 1 BAEYER-VILLIGER OXIDATION OF KETONES CATALYSED BY RHENIUM COMPLEXES BEARING N- OR OXO-LIGANDS.pdf: 446624 bytes, checksum: c435b4b1124047bcf5b3560a9beefde2 (MD5) Made available in DSpace on 2015-09-08T13:42:59Z (GMT). No. of bitstreams: 1 BAEYER-VILLIGER OXIDATION OF KETONES CATALYSED BY RHENIUM COMPLEXES BEARING N- OR OXO-LIGANDS.pdf: 446624 bytes, checksum: c435b4b1124047bcf5b3560a9beefde2 (MD5) Previous issue date: 2012-11-07

The reaction of flavoenzymes with oxygen remains a fascinating area of research because of its relevance for reactive oxygen species (ROS) generation. Several exciting recent studies provide consistent mechanistic clues about the specific functional and structural properties of the oxidase and monooxygenase flavoenzymatic systems. Specifically, the spatial arrangement of the reacting oxygen that is in direct contact with the flavin group is emerging as a crucial factor that differentiates between oxidase and monooxygenase enzymes. A challenge for the future will be to use these emerging concepts to rationally engineer flavoenzymes, paving the way to new research avenues with far-reaching implications for oxidative biocatalysis and metabolic engineering.