Search

An electroceutical is a medical device that uses electrical signals to control biological functions. It can be inserted into the human body as an implant and has several crucial advantages over conventional medicines for certain diseases. This research develops a new vagus nerve simulation (VNS) electroceutical through an innovative approach to overcome the communication limitations of existing devices. A phased array antenna with a better communication performance was developed and applied to the electroceutical prototype. In order to effectively respond to changes in communication signals, we developed the steering algorithm and firmware, and designed the smart communication protocol that operates at a low power that is safe for the patients. This protocol is intended to improve a communication sensitivity related to the transmission and reception distance. Based on this technical approach, the heightened effectiveness and safety of the prototype have been ascertained, with the actual clinical tests using live animals. We confirmed the signal attenuation performance to be excellent, and a smooth communication was achieved even at a distance of 7 m. The prototype showed a much wider communication range than any other existing products. Through this, it is conceivable that various problems due to space constraints can be resolved, hence presenting many benefits to the patients whose last resort to the disease is the VNS electroceutical. [ABSTRACT FROM AUTHOR]

Radar coincidence imaging (RCI) is a high‐resolution radar imaging mode which constructs a temporal spatial stochastic radiation field (TSSRF) and uses the correlation between reference signal and echoes for imaging. The correlation between the reference matrix and the echoes is the main factor affecting the imaging performance. In fact, radar target characteristics cause fluctuations in the radar cross section and variations in the scattering intensity of each resolution element. The latter degrades the correlation between the reference matrix and the echoes, seriously affecting the image reconstruction. This paper designs the waveform based on image entropy under fixed transmitting and receiving arrays. The targets with fluctuating scattering intensity at each resolution element are statistically modelled. Simulation results show this approach can improve the imaging performance and reduce the energy dissipation degree of the target grid. [ABSTRACT FROM AUTHOR]

This paper presents a new technique for estimating the two-dimensional direction of departure (2D-DOD) and direction of arrival (2D-DOA) in bistatic uniform planar array Multiple-Input Multiple-Output (MIMO) radar systems. The method is based on the reduced-dimension (RD) MUSIC algorithm, aiming to achieve improved precision and computational efficiency. Primarily, this pioneering approach efficiently transforms the four-dimensional (4D) estimation problem into two-dimensional (2D) searches, thus reducing the computational complexity typically associated with conventional MUSIC algorithms. Then, exploits the spatial diversity of array response vectors to construct a 4D spatial spectrum function, which is crucial in resolving the complex angular parameters of multiple simultaneous targets. Finally, the objective is to simplify the spatial spectrum to a 2D search within a 4D measurement space to achieve an optimal balance between efficiency and accuracy. Simulation results validate the effectiveness of our proposed algorithm compared to several existing approaches, demonstrating its robustness in accurately estimating 2D-DOD and 2D-DOA across various scenarios. The proposed technique shows significant computational savings and high-resolution estimations and maintains high precision, setting a new benchmark for future explorations in the field. [ABSTRACT FROM AUTHOR]

Combining elastic full waveform inversion (FWI) with rock physics holds promise for expanding the application of FWI beyond seismic imaging to predicting and monitoring reservoir properties. Distributed acoustic sensing (DAS), a rapidly developing seismic acquisition technology, is being explored for its potential in supporting FWI applications. In this study, we implement a sequential inversion scheme that integrates elastic FWI and Bayesian rock physics inversion, using a vertical seismic profile (VSP) data set acquired with accelerometer and collocated DAS fibre at the Carbon Management Canada's Newell County Facility. Our aim is to establish a baseline model of porosity and lithology parameters to support later monitoring of CO2 storage. Key strategies include an effective source approach for addressing near-surface complications, a modelling strategy to simulate DAS data comparable to field data, and a Gaussian mixture approach to capture the bimodality of rock properties. We conduct FWI tests on accelerometer, DAS, and combined accelerometer-DAS data. While our inversion results accurately reproduce either data set, the elastic models inverted from accelerometer data outperform the other two in matching well logs and identifying the target reservoir. We attribute this outcome to the limited complementarity of DAS data with accelerometer data in our experiment, along with the limitations imposed by single-component measurements on DAS. The porosity and lithology models predicted from accelerometer-derived elastic models are reasonably accurate at the well location and exhibit geologically meaningful spatial distribution. [ABSTRACT FROM AUTHOR]

In this paper, we devise an effective algorithm for direction-of-arrival (DOA) estimation using the cross-dipole array via one-bit quantization. Firstly, we theoretically prove that after one-bit quantization, two circular complex Gaussian random processes with different variance still satisfy the arcsine law and calculate the normalized covariance matrix of the cross-dipole array output based on this property. Subsequently, we reconstruct the noise-free normalized covariance matrix by subtracting the normalized noise matrix. Finally, we apply the TLS-ESPRIT algorithm to the reconstructed noise-free normalized covariance matrix to extract the DOAs of sources. Numerical results demonstrate the validity of the proposed algorithm. [ABSTRACT FROM AUTHOR]

Digital speech recognition is a challenging problem that requires the ability to learn complex signal characteristics such as frequency, pitch, intensity, timbre, and melody, which traditional methods often face issues in recognizing. This article introduces three solutions based on convolutional neural networks (CNN) to solve the problem: 1D-CNN is designed to learn directly from digital data; 2DS-CNN and 2DM-CNN have a more complex architecture, transferring raw waveform into transformed images using Fourier transform to learn essential features. Experimental results on four large data sets, containing 30,000 samples for each, show that the three proposed models achieve superior performance compared to well-known models such as GoogLeNet and AlexNet, with the best accuracy of 95.87%, 99.65%, and 99.76%, respectively. With 5-10% higher performance than other models, the proposed solution has demonstrated the ability to effectively learn features, improve recognition accuracy and speed, and open up the potential for broad applications in virtual assistants, medical recording, and voice commands. [ABSTRACT FROM AUTHOR]

In this article, we propose a joint waveform based on universal filtered multicarrier (UFMC) chirp for radar jamming and communication joint systems. Modulation of radar jamming chirp signals and communication signals on different subcarrier groups in the UFMC sub-band is used to achieve the waveform design. The jamming signal in the waveform contains a frequency shift coefficient that depends on the delay time, which can effectively improve the anti-frequency hopping ability and enhance the overall jamming efficiency. Simultaneously jamming signals can provide assistance in channel estimation and equalization of communication, improving the information transmission quality of communication subsystems. We concluded through reasonable trade-off analysis that the combined weight of radar jamming and communication is closely related to the overall performance of the waveform. The simulation results show that the proposed UFMC chirp synthesized waveform has good jamming and communication performance. Software defined radio (SDR) simulation experiments demonstrated the effectiveness of this method in practical environments. [ABSTRACT FROM AUTHOR]

Joint transceiver beamforming is a fundamental and crucial research task in the field of signal processing. Despite extensive efforts made in recent years, the joint transceiver beamforming of frequency diverse array (FDA)-based multiple-input and multiple-output (MIMO) radar has received relatively less attention and is confronted with some tricky challenges, such as range–angle decoupling and the interaction between multiple performance metrics. In this paper, we initially derive the generalized ambiguity function of the FDA-MIMO radar to explore the intrinsic correlation between its waveform design and resolution. Following that, the joint beamforming optimization is formulated as a nonconvex bivariate quadratic programming problem (NBQP) with the aim of maximizing the Signal-to-Interference-Noise Ratio (SINR) of the FDA-MIMO radar system. Building upon this, we introduce an innovative alternating manifold optimization with nested iteration (AMO-NI) algorithm to address the NBQP. By incorporating manifold optimization into iterative updates of transmit waveform and receiving filter, the AMO-NI algorithm considers the interdependencies among the optimization variables. The algorithm efficiently and expeditiously finds global optimum solutions within a finite number of iterations. Compared with other methods, our approach yields a superior beampattern and higher SINR. [ABSTRACT FROM AUTHOR]

This article proposes a rotary transformer position decoding scheme for motor drive control. In this scheme, a simple analog circuit is used to design the excitation circuit and signal conditioning circuit. Demodulate the modulated sine/cosine signal through software and decode it through a phase locked loop (PLL) to obtain the implemented position signal. This scheme completely avoids the use of traditional, specialized decoding chips. At the same time, in order to make the position decoding scheme applicable to different motor drive control platforms, a single-cycle partition average based pulse signal estimation method is proposed for converting the angle position into pulse signals similar to the output of an encoder's phases A, B, and Z, which are referred to as A/B/Z signals in the paper. In order to experimentally validate the proposed scheme, a software decoding platform based on the STM32F407 was built and compared with the decoding results of the chip. The effectiveness and accuracy of the proposed scheme were verified, and it can be effectively applied in the field of motor drive control. [ABSTRACT FROM AUTHOR]

Detection of space objects is a key component of space situational awareness, which could help prevent and minimise space collisions. While there have been lots of radar systems designed to detect space objects, few of them have dealt with long baseline distributed bistatic pairs. The authors focus on the feasibility of long baseline bistatic radars, which can be extended for the multistatic case; and the performance of the multistatic system for a target at different altitudes assuming one transmitter over three different scenarios: a cluster of receivers, receivers spread throughout the world and the combination of the two previous cases. To analyse the performance the multiple‐input‐multiple‐output (MIMO) ambiguity function (AF) will be employed. The results of the MIMO AF show how the fusion of different bistatic pairs improves the detection capabilities. Moreover, when the different radar measurements are coherently summed in the MIMO AF, the uncertainty on the location of the target is reduced. [ABSTRACT FROM AUTHOR]

The large-scale wind power grid connection will change the power distribution between the original system tide and synchronous machine, and the interaction between wind turbine and synchronous machine affects the system's damping oscillation characteristics. Traditional synchronous generators' extra damping control provides an important means for DFIG to improve system damping characteristics. Different types of PSS have different suppression effects on low-frequency oscillations. In this paper, four types of IEEE PSS models are built in DIGSILENT/PowerFactory to study the suppression effects of DFIG additional different types of PSS on low-frequency oscillations of power systems, and the suppression effect of four types of PSS on system low-frequency oscillation after connecting to the DFIG reactive power control loop is compared and analyzed from two perspectives: eigenvalue and time-domain simulation. The MRAC control principle is used to improve PSS4B, and the total least squares-estimation of signal parameters via rotational invariance technique identification method is used to obtain the system transfer function, and the controller parameters are calculated in real time using the adaptive law based on the gradient approach. Finally, the MRAC–PSS4B is connected to the DFIG rotor-side controller's reactive power control loop, and the improvement effect of the designed MRAC–PSS4B controller on the power system's low-frequency oscillation characteristics under different contact line transmission power is confirmed. [ABSTRACT FROM AUTHOR]

In this paper, a recursive d -step-ahead predictive control scheme based on multi-dimensional Taylor network (MTN) is proposed for the real-time tracking control of multiple-input multiple-output (MIMO) nonlinear systems with input time-delay. The MTN predictive model is designed using a recursive approach to compensate the influence of time-delay, and an extended Kalman filter (EKF) is applied as its learning algorithm. An MTN controller is developed based on a proportional–integral–derivative (PID) controller where the closed-loop errors between the reference input and the system output are set as the MTN controller's inputs. Then, a back propagation (BP) algorithm, designed to update its weights according to errors caused by system uncertainty, is used as a learning algorithm for the MTN controller. Meanwhile, the convergence of the MTN predictive model and the stability of the closed-loop system are evaluated. Two numerical examples and a practical example – continuous stirred tank reactor (CSTR) process are presented to verify the superiority of the proposed scheme. The experimental results and the computational complexity analysis show that the proposed scheme is effective, promising its desirable robustness, anti-disturbance, tracking and real-time performance. [ABSTRACT FROM AUTHOR]

Digital radio frequency memory (DRFM) has emerged as an advanced technique to achieve a range of jamming signals, due to its capability to intercept waveforms within a short time. multiple-input multiple-output (MIMO) radars can transmit agile orthogonal waveform sets for different pulses to combat DRFM-based jamming, where any two groups of waveform sets are also orthogonal. In this article, a group orthogonal waveform optimal design model is formulated in order to combat DRFM-based jamming by flexibly designing waveforms for MIMO radars. Aiming at balancing the intra- and intergroup orthogonal performances, the objective function is defined as the weighted sum of the intra- and intergroup orthogonal performance metrics. To solve the formulated model, in this article, a group orthogonal waveform design algorithm is proposed. Based on a primal-dual-type method and proper relaxations, the proposed algorithm transforms the original problem into a series of simple subproblems. Numerical results demonstrate that the obtained group orthogonal waveforms have the ability to flexibly suppress DRFM-based deceptive jamming, which is not achievable using p-majorization–minimization (p-MM) and primal-dual, two of the most advanced orthogonal waveform design algorithms. [ABSTRACT FROM AUTHOR]

In scenarios with constrained physical aperture sizes, aiming to enhance the resolution and accuracy of Direction of Arrival (DOA) estimation, this paper proposes a novel approach that integrates a moving synthetic virtual array with Sparse Bayesian Learning (SBL) for DOA estimation. Initially, a virtual array is constructed based on the motion characteristics of the target. Subsequently, the SBL method is employed to estimate the DOA of the target. Simulation experiments validate the effectiveness of this approach, demonstrating comparable DOA estimation performance to synthetic aperture methods with larger aperture sizes, even in situations with limited aperture expansion. Furthermore, under constant virtual aperture expansion, this method surpasses non‐SBL methods regarding DOA resolution. We explore the construction of a virtual array through the relative displacement induced by target motion. It further investigates the performance improvement of Direction of Arrival (DOA) estimation resolution using sparse Bayesian learning within the context of a virtual array. [ABSTRACT FROM AUTHOR]

High-precision waveform identification and measurement are effective for waveform detection and evaluation in signal processing. The accuracy of waveform identification, precision of measurement, and speed of response are important indicators of waveform measurement instruments. To detect the waveform accurately, a hold and attenuation circuit divided into two is designed, and the STM32F4 microcontroller is used to accurately capture and perform spectrum analysis using a high-precision analog-to-digital converter based on fast Fourier transform technology to identify key parameters, such as waveform type, frequency, peak-to-peak value, and duty cycle. To improve the recognition accuracy and response speed, technical solutions, such as high-frequency sampling and over-zero detection, are used to improve the system efficiency. Algorithm simulation, circuit simulation, and physical testing show that the high-precision waveform synchronization recognition circuit and algorithm can accurately recognize various essential waveforms in the voltage and frequency ranges of 50 mV ≤ VPP ≤ 10 V and 1 Hz ≤ f ≤ 50 kHz, respectively, and simultaneously measure important parameters, such as frequency, peak-to-peak value, and duty cycle with an accuracy within ±1%. Intelligent linkage, no intermediate parameter setting, and a response speed of approximately 0.3 s make it suitable for such applications as fast and high-precision waveform intelligent detection and display. The method is highly integrated, simple to operate, cost-effective, and practical. [ABSTRACT FROM AUTHOR]

The Integrated Side Lobe Ratio (ISLR) problem the authors consider here consists in finding optimal sequences of phase shifts in order to minimise the mean squared cross‐correlation side lobes of a transmitted radar signal and a mismatched replica. Currently, ISLR does not seem to be easier than the general polynomial unconstrained binary problem, which is NP‐hard. In their work, the authors aim to take advantage of the scalability of quantum computing to find new optima, by solving the ISLR problem on a quantum annealer. This quantum device is designed to solve quadratic optimisation problems with binary variables (QUBO). After proposing suitable formulation for different instances of the ISLR, the authors discuss the performances and the scalability of their approach on the D‐Wave quantum computer. More broadly, their work enlightens the limits and potential of the adiabatic quantum computation for the solving of large instances of combinatorial optimisation problems. [ABSTRACT FROM AUTHOR]

A novel‐shaped dual‐polarized low‐profile multiple‐input multiple‐output (MIMO) antenna with high isolation is proposed for 5G/WLAN application. An 8‐element MIMO antenna design comprises two unique planar radiators (chamfer, circular). Each radiator has dual feed and dual polarization characteristics. The prototype is fabricated with an FR‐4 dielectric substrate. A decoupling structure maintains desirable isolation for self‐isolated elements (≤ $\le $−12 dB) using substrate integrated waveguide stubs between inter‐ports and high isolation among the adjacent radiating elements (≤ $\le $−15 dB). The simulation was performed by using CST microwave studio. The simulated results of the proposed MIMO antenna are compared with the measurement results. Furthermore, ECC and DG are investigated. [ABSTRACT FROM AUTHOR]

Full‐waveform inversion is a wave equation–based imaging technique for obtaining subsurface model parameters by matching modelled with field data. Full‐waveform inversion is often formulated as a local optimization problem in which the model parameterization influences the gradient preconditioner and the convergence rate associated with the full‐waveform inversion objective function. Model parameterization governs the radiation pattern of the so‐called secondary Born source. In this work, we assess model parameterization effects on the estimation of P‐wave velocities using a three‐dimensional acoustic time‐domain full‐waveform inversion procedure. These include the three commonly used parameterization: velocity, slowness and squared slowness. In this context, we consider a field data set from a deepwater Brazilian pre‐salt field using a recently introduced circular shot ocean bottom node acquisition which favours refracted waves. The results reveal that the squared slowness model parameterization provides a satisfactory trade‐off between the reconstruction of the deep pre‐salt target area and convergence rate, saving 50% of runtime compared to the velocity and slowness cases. [ABSTRACT FROM AUTHOR]

A 1 x 4 magneto-electric dipole (ME dipole) antenna array for 77 GHz automotive radar is proposed. The ME dipole is fed by a fork-shaped microstrip line coupling through a dog-bone slot. To meet the requirements aimed at automotive radar applications, the beamwidths of the proposed antenna are well-designed. Specially, a method of adding passive elements on both sides of the array is proposed to increase the 3 dB beamwidth from ±34° to ±52° in azimuth. Additionally, in elevation, a 3 dB beamwidth of ±10° is achieved by designing the spacing between array elements. Moreover, based on low-loss printed circuit board substrates, radiation efficiency of the proposed array can reach approximately 90% at 77 GHz. Furthermore, a 4 x 4 array is established by arranging four 1 x 4 subarrays spacing 1.95 mm (half a free-space wavelength at 77 GHz) to study the interactions between subarrays for multiple input multiple output scenarios. A 1 x 4 and a 4 x 4 antenna prototypes are fabricated and measured to validate the correctness of this design. The results show that the proposed antenna is an eligible candidate for the medium- and short-range automotive radars. [ABSTRACT FROM AUTHOR]

This paper proposes a high-performance receiver for underwater acoustic communications based on time reversal processing for multiple-input multiple-output (MIMO) systems. The receiver employs the vector approximate message passing (VAMP) algorithm as a soft equalizer in turbo equalization. By performing self-iteration between the inner soft slicer and the inner soft equalizer, the VAMP algorithm achieves near-optimal performance. Furthermore, an iterative channel-estimation-based soft successive interference cancellation method is incorporated to suppress co-channel interference in the MIMO system. Additionally, the introduction of passive time reversal technology can combine multiple channels into a single channel, which greatly reduces the computational complexity of the MIMO system, especially for large MIMO systems. The effectiveness of the proposed receiver is verified using experimental data collected in Songhua Lake, China in 2019. The results demonstrate that the proposed receiver significantly reduces the complexity of the traditional parallel-VAMP receiver without sacrificing performance and outperforms other receivers of the same type. Moreover, our experimental results also verify that the VAMP-turbo outperforms the generalized approximate message passing (GAMP)-turbo in terms of bit error rate and convergence performance. [ABSTRACT FROM AUTHOR]

Millimetre‐wave radar has been widely used in health monitoring and human activity recognition owing to its improved range resolution and operation in a variety of environmental conditions. With the MIMO antenna array, 4D radar is increasingly employed in autonomous driving, while its application in assisted living is recent and therefore the value added compared to the increase in signal processing and hardware requirements is still an open question. A model for 4D Time‐division multiplexing (TDM) multiple‐input‐multiple‐output (MIMO) frequency‐modulated Continuous wave radar is established using the human activities from the HDM05 motion capture dataset. The simulator produces an end‐to‐end simulation, including four human motions (jumping Jack, kick, punch, and walk), signal time of flight, noise, MIMO signal processing, and classification. Different pre‐processing and point cloud‐based methods are compared to obtain an average classification accuracy of 90% with PointNet. This study simulates a specific 4D TDM MIMO radar configuration to benchmark signal pre‐processing algorithms, which can also assist other researchers to generate range‐Doppler‐time (range‐Doppler time) point cloud data sets for human activities testing different radar configurations, array configurations, and activities saving valuable time in human resources and hardware development before prototyping to assess expected performances. [ABSTRACT FROM AUTHOR]

Summary: The dynamics and control of the Korteweg‐de Vries‐Kuramoto‐Sivashinsky (KdVKS) equation subject to periodic boundary conditions are considered. First, the dynamics of the KdVKS equation is analyzed using the Fourier Galerkin reduced‐order method. This reduced‐order method is used to generate a finite‐dimensional approximation of the KdVKS equation. Then, a multiple‐input multiple‐output (MIMO) and a single‐input single‐output (SISO) controllers are designed to stabilize the finite‐dimensional approximation of the linearized KdVKS equation. We show that both the MIMO and SISO controllers which are designed to stabilize the linearized system will locally stabilize the infinite‐dimensional KdVKS equation. The Frechét differentiability of the semigroup generated by the closed‐loop system is crucial to prove the local stability results of the controllers. Furthermore, we show that the condition on the number of output measurements that must equal to the total number of unstable and critically stable eigenvalues of the linearized KdVKS equation is not necessary for the local exponential stability of the KdVKS equation. Finally, numerical simulations based on the two designed controllers are presented and compared to illustrate the developed theory. [ABSTRACT FROM AUTHOR]

With the increasing use of the strategy and group target attack method in the modern battlefield, multi-target inverse synthetic aperture radar (ISAR) imaging simultaneously with high efficiency draws more and more attention, which gives a promising prospect for aerospace target detection and recognition in the multi-target scenario. To overcome the shortcomings of traditional multi-target imaging with one beam at one pulse repetition time (PRT) based on phase array radar (PAR), this paper proposes a novel multi-target imaging waveform design method based on the newly full digital array radar (DAR). Firstly, we propose using radar waveform diversity with 2D orthogonality to realize multi-target ISAR imaging with high imaging quality and efficiency. Then, to meet the constant modulus requirement for maximizing the transmitting power, orthogonal frequency division multiplexing (OFDM) chirp theory is proposed to directly generate the transmit waveform instead of the traditional optimization method with the nonconvex problem for waveform design. Based on time-variant weighted and time diversity technology, a of group transmit waveforms is designed, which can form multiple beams simultaneously and make the signals arriving at different targets approximately orthogonal. Finally, simulations and experiments are carried out to demonstrate the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

This paper provides an assessment of a 24 GHz multiple-input multiple-output radar as a remote sensing tool to retrieve bathymetric maps in coastal areas. The reconstruction procedure considered here exploits the dispersion relation and has been previously employed to elaborate the data acquired via X-band marine radar. The estimation capabilities of the sensor are investigated firstly on synthetic radar data. With this aim, case studies referring to sea waves interacting with a constant and a spatially varying bathymetry are both considered. Finally, the reconstruction procedure is tested by processing real data recorded at Bagnoli Bay, Naples, South Italy. The preliminary results shown here confirm the potential of the radar sensor as a tool for sea wave monitoring. [ABSTRACT FROM AUTHOR]

Attaining precise target detection and channel measurements are critical for guiding beamforming optimization and data demodulation in massive multiple-input multiple-output (MIMO) communication systems with hybrid structures, which requires large pilot overhead as well as substantial computational complexity. With benefits from the powerful detection characteristics of MIMO radar, we aim for designing a novel sensing-assisted semi-blind detection scheme in this paper, where both the inherent low-rankness of signal matrix and the essential knowledge about geometric environments are fully exploited under a designated cooperative manner. Specifically, to efficiently recover the channel factorizations via the formulated low-rank matrix completion problem, a low-complexity iterative algorithm stemming from the alternating steepest descent (ASD) method is adopted to obtain the solutions in case of unknown noise statistics. Moreover, we take one step forward by employing the denoising convolutional neural network (DnCNN) to preprocess the received signals due to its favorable performance of handling Gaussian denoising. The overall paradigm of our proposed scheme consists of three stages, namely (1) target parameter sensing, (2) communication signal denoising and (3) semi-blind detection refinement. Simulation results show that significant estimation gains can be achieved by the proposed scheme with reduced training overhead in a variety of system settings. [ABSTRACT FROM AUTHOR]

The simultaneous transmit and receive (STAR) array system provides higher radiation gain and data rate compared to traditional radio system. Because of the various mutual couplings between each pair of transmit and receive elements, it is a great challenge to suppress the incident self-interference power at multiple receive elements, which is usually much higher than the desired signal of interest (SoI) power and causes the saturation of receive links and the distortion of the digital SoI. In this paper, we propose an optimized method for transmit beamforming based on radiation power constraints and transmit power control. Through adaptive transmit beamforming, high isolation between the transmit array and each receive link is achieved, minimizing the self-interference power at each receiving element. This method effectively reduces the self-interference power, avoiding distortion of the SoI digital signal caused by limited-bit analog-to-digital converters (ADCs). Simulation results demonstrate that this optimized transmit beamforming method can achieve more than 100 dB effective isotropic isolation (EII) on a 32-element two-dimensional phased array designed in HFSS, reducing the maximum incident self-interference power at the receive channels by approximately 35 dB, while effectively controlling the attenuation of the transmit gain. We also present the advantages in receive subarray isolation and lower ADCs digits under the transmit ABF method. [ABSTRACT FROM AUTHOR]

We present two methods for improved calibration of multi-point electron density measurements from incoherent scatter radars (ISR). They are based on the well-established Flatfield correction method used in imaging and photography, where we exploit the analogy between independent measurements in separate pixels in one image sensor and multi-beam radar measurements. Applying these correction methods adds to the current efforts of estimating the magic constant or system constant made for the calibration of multi-point radars, increasing data quality and usability by correcting for variable, unaccounted, and unpredictable variations in system gain. This second-level calibration is especially valuable for studies of plasma patches, irregularities, turbulence, and other research where inter-beam changes and fluctuations of electron density are of interest. The methods are strictly based on electron density data measured by the individual radar and require no external input. This is of particular interest when independent measurements of electron densities for calibration are available only in one pointing direction or not at all. A correction factor is estimated in both methods, which is subsequently used to scale the electron density measurements of a multi-beam ISR experiment run on a phased array radar such as RISR-N, RISR-C, PFISR, or the future EISCAT3D radar. This procedure could improve overall data quality if used as part of the data-processing chain for multi-beam ISRs, both for existing data and for future experiments on new multi-beam radars. [ABSTRACT FROM AUTHOR]

The marginal Fisher information (MFI) metric is used to design waveforms for the sake of informationally optimal adaptive‐on‐transmit radar operation. A framework for MFI waveform design is developed and the Polyphase‐Coded FM (PCFM) waveform model is utilised to produce a constant‐modulus, spectrally contained signal amenable to transmission with high‐power amplifiers. The efficacy of the MFI waveform design and minimum mean square error (MMSE) estimation is experimentally demonstrated and extended into an adaptive and dynamic sensing paradigm. The radar transmit waveform is optimised to maximise the Fisher information with respect to the range profile. Upon observing new information from radar echoes, the iterative MMSE (iMMSE) estimator then minimises the estimation error variance according to prior observations. Sequential information maximisation (via waveform design) and error minimisation (via iMMSE) tends towards the Cramér–Rao lower bound (CRLB) with additional measurements improving radar resolution and accuracy. These concepts maximise the information extracted by a radar operating in a congested spectrum where the available bandwidth is limited. [ABSTRACT FROM AUTHOR]

The multiple-input multiple-output synthetic aperture radar (MIMO SAR) system has developed rapidly since its discovery. At the same time, the low-disturbance and high-gain requirements of the MIMO system are continuing to increase. Through the application of digital beamforming (DBF) techniques, the multidimensional waveform encoding (MWE) technique can play a key role in MIMO systems, which can greatly improve the system's performance, especially the multi-mission capability of radar. Intrapulse beamsteering in elevation is a typical form of multi-dimensional waveform encoding which can greatly improve the transmitting efficiency and multi-mission performance of radar. However, because of the high sensitivity of the DBF technique to height, there is significant deterioration in performance in the presence of terrain undulations. The OFDM (Orthogonal Frequency Division Multiplexing) technique is widely used in communication. Due to the similarity of radar and communication systems and the great waveform diversity of OFDM signals, the OFDM radar has recently begun to emerge as a new radar system, simultaneously, the orthogonality of OFDM signals is in the time and frequency domains, and is not affected by terrain undulation. So, this paper proposes a novel radar mode combining intrapulse beamsteering in elevation and OFDM-Chirp signals, that is, the combination of "beam orthogonality" and "waveform orthogonality", which can greatly improve the performance and fault tolerance to interference signals. In this manuscript, the system working mode and signal processing flow are introduced in detail, and simulations for both point targets and distributed targets are carried out to verify the feasibility of the proposed mode. Simultaneously, a comparison experiment is carried out, which shows the high level of fault tolerance to terrain undulation and the high potential of the proposed radar mode in Earth observation. [ABSTRACT FROM AUTHOR]

A high-frequency surface wave radar (HFSWR) is the only sensor that provides inexpensive surveillance for up to 200 nautical miles (NM) of the exclusive economic zone in the 3–5 MHz band. However, because of its long wavelength, its angular resolution is low. Multiple-input multiple-output (MIMO) technology is an attractive method to improve angular resolution. This paper proposes MIMO waveforms and their processing that can be used in HFSWR systems. This dual modulation method applies linear frequency modulation to each pulse and orthogonal polyphase codes for a few consecutive pulses to enable MIMO processing. The proposed method can effectively remove the correlation of mutual interference and exhibits excellent performance in removing multiple-time-around echoes. [ABSTRACT FROM AUTHOR]

The conventional back projection (BP) algorithm is an accurate time-domain algorithm widely used for multiple-input multiple-output (MIMO) radar imaging, owing to its independence of antenna array configuration. The time-delay curve correction back projection (TCC-BP) algorithm greatly reduces the computational complexity of BP but suffers from spatial-variant correction, sidelobe interference and background noise due to the use of coherent superposition of echo time-delay curves. In this article, a residual attention U-Net-based (RAU-Net) MIMO radar imaging method that adapts complex noisy scenarios with spatial variation and sidelobe interference is proposed. On the basis of the U-Net underlying structure, we develop the RAU-Net with two modules: a residual unit with identity mapping and a dual attention module to obtain resolution spatial-variant correction and denoising on real-world MIMO radar images. The network realizes MIMO radar imaging based on the TCC-BP algorithm and substantially reduces the total computational time of the BP algorithm on the basis of improving the imaging resolution and denoising capability. Extensive experiments on the simulated and measured data demonstrate that the proposed method outperforms both the traditional methods and learning-imaging methods in terms of spatial-variant correction, denoising and computational complexity. [ABSTRACT FROM AUTHOR]

Thermal wave radar (TWR) thermography is a high-efficient nondestructive testing technique to increase the signal-to-noise ratio (SNR) and to enhance target detection capability. However, the detection of subsurface defects, especially small-size defects, usually requires a distinctively high SNR and depth resolvability. This paper proposed an orthogonal phase-coded linear frequency modulated (OPCLFM) excitation waveform, which has significantly improved the SNR and depth resolvability of TWR compared to the LFM waveform. The pulse compression quality of the OPCLFM waveform was initially evaluated through a 1D thermal wave analytical model of carbon fiber reinforced polymer (CFRP) laminate. Results show that the OPCLFM waveform combined with the Kaiser window function compresses the largest sidelobe at least by 18.39 dB compared to the LFM waveform. Furthermore, the superior depth resolvability performance of the OPCLFM waveform was also validated by 3D finite element simulation. Finally, the effect of thermal conductivity on the depth resolvability performance of the OPCLFM waveform was evaluated quantitatively by a delaminated CFRP laminate. [ABSTRACT FROM AUTHOR]

The problem of accurate source localization has been an area of focus in high-frequency surface wave radar (HFSWR) applications. However, antenna pattern distortion (APD) decreases the direction-of-arrival (DOA) estimation performance of the multiple signal classification (MUSIC) algorithm. Up to now, limited studies have been conducted on the calibration of antenna pattern distortion for phased arrays in HFSWR. In this paper, we first analyze the effect of APD on the performance of the MUSIC algorithm through estimation of accuracy and angular resolution. We demonstrate that using the actual pattern (or say APD) can improve DOA estimation performance. Based on this proposition, we propose a novel iterative calibration method that employs the first-order sea clutter data and can jointly estimate DOA and APD in an iterative way. To obtain available calibration points, we introduce the extraction methods of the first-order sea clutter spectrum and single-DOA spectrum points. Meanwhile, in each iteration, the Beamspace MUSIC algorithm and artificial hummingbird algorithm (AHA) are utilized to estimate the DOA and APD, respectively. Numerical results reveal a good coincidence between the actual pattern and the estimated APD. We also apply this method to process the experimental data of HFSWR. We obtain the APD vector of the real phased array and improve the direction-finding performance of several real ship targets using this vector. Both numerical and experimental results prove the correctness of our proposed calibration method. [ABSTRACT FROM AUTHOR]

To solve error propagation and exorbitant computational complexity of signal detection in wireless multiple-input multiple-output-orthogonal frequency division multiplexing (MIMO-OFDM) systems, a low-complex and efficient signal detection with iterative feedback is proposed via a constellation point feedback optimization of minimum mean square error-ordered successive interference cancellation (MMSE-OSIC) to approach the optimal detection. The candidate vectors are formed by selecting the candidate constellation points. Additionally, the vector most approaching received signals is chosen by the maximum likelihood (ML) criterion in formed candidate vectors to reduce the error propagation by previous erroneous decision, thus improving the detection performance. Under a large number of matrix inversion operations in the above iterative MMSE process, effective and fast signal detection is hard to be achieved. Then, a symmetric successive relaxation iterative algorithm is proposed to avoid the complex matrix inversion calculation process. The relaxation factor and initial iteration value are reasonably configured with low computational complexity to achieve good detection close to that of the MMSE with fewer iterations. Simultaneously, the error diffusion and complexity accumulation caused by the successive detection of the subsequent OSIC scheme are also improved. In addition, a method via a parallel coarse and fine detection deals with several layers to both reduce iterations and improve performance. Therefore, the proposed scheme significantly promotes the MIMO-OFDM performance and thus plays an irreplaceable role in the future sixth generation (6G) mobile communications and wireless sensor networks, and so on. [ABSTRACT FROM AUTHOR]

In this article, a miniature eight-port multiple-input multiple-output (MIMO) antenna array is proposed for fifth-generation (5G) sub-6 GHz handset applications. The individual antenna element comprises a radiator shaped like the Chinese character "王" (phonetically represented as "Wang") and three split-ring resonators (SRR) on the metal frame. The size of the individual antenna element is only 6.8 × 7 × 1 mm3 (47.6 mm3). The proposed antenna element has a −10 dB impedance bandwidth of 1.7 GHz (from 3.3 GHz to 5 GHz) that can cover 5G New Radio (NR) sub-6 GHz bands N77 (3.3–4.2 GHz), N78 (3.3–3.8 GHz), and N79 (4.4–5 GHz). The evolution design, the current distribution, the effects of single-handed holding, and the analysis of the parameters are deduced to study the approach used to design the featured antenna. The measured total efficiencies are from 40% to 80%, the isolation is better than 12 dB, the calculated envelope correlation coefficient (ECC) is less than 0.12, and the calculated channel capacity (CC) ranges from 35 to 38 bps/Hz. The presented antenna array is a good alternative to 5G mobile handsets with wideband operation, a metal frame, and minimized spacing. [ABSTRACT FROM AUTHOR]

Grant-free random access (RA) utilizing massive multiple-input multiple-output (MIMO) technology has attracted considerable attention in recent years due to its potential to enhance spectral efficiency. This paper introduces an innovative and advanced approach for the joint detection of users and estimation of channels in grant-free RA. The approach incorporates two distinct preamble structures: the single orthogonal preamble (SOP) and the concatenated orthogonal preamble (COP). The proposed algorithms make full use of the inherent quasiorthogonal characteristic of massive MIMO, thereby enabling the accurate estimation of user channels while effectively avoiding collisions in the preambles. As a result, these algorithms generate highly precise estimations of user channels. To substantiate the effectiveness of the proposed algorithms, this paper provides an extensive theoretical analysis and presents a comprehensive set of experimental results. These findings offer robust evidence for the efficacy of the algorithms in substantially bolstering the performance of grant-free RA. Additionally, we have conducted further research and analysis, which has led to additional insights and refinements in our proposed approach. Moreover, the experimental results validate the statistical significance and reliability of the performance enhancements achieved by these algorithms. Moreover, the proposed approach exhibits robustness in scenarios with different levels of user density and varying channel conditions. Through a thorough analysis of these scenarios, we showcase the versatility and applicability of our algorithms in real-world environments. [ABSTRACT FROM AUTHOR]

For very high frequency (VHF) phased array radar, the key problem to be solved in altitude measurement is the super-resolution spatial spectrum estimation under the condition of coherent sources. The spatial smoothing algorithm is a kind of decorrelation algorithm with excellent properties, but the decorrelation process is at the expense of the effective array aperture. Because it only uses the autocorrelation information of the subspace, its performance is significantly reduced, when the positions of the coherent sources are very close. In order to solve the above problems, this paper proposes an altitude measurement method of VHF radar based on the space smoothing of autocorrelation and cross-correlation matrix, which is used to realize the correlation and super-resolution processing of echo signals and multipath signals. The proposed method does not need to construct a weighting matrix, and can make full use of the received data, enhance the signal components in the equivalent spatial smoothing matrix, reduce the impact of noise, and improve the resolution of coherent sources. The simulation results show that the weighted spatial smoothing method proposed in this paper is correct and effective. [ABSTRACT FROM AUTHOR]

To ensure pipelines' safety it is essential to have a regular and accurate monitoring system to inspect the behaviour of pipelines over time to prevent potential damage. This paper explores the capability of a millimetre-wave multiple-input multiple-output (MIMO) radar system for micro-vibration monitoring of pipelines. Compared to the conventional radars, MIMO radar provides cross-range resolution, while still being capable of monitoring a scene with sub-second data acquisition intervals. This makes it a non-contact system suitable for fast displacement and vibration monitoring. However, the application of MIMO radars has not been fully investigated and analysed for structural monitoring, especially for pipeline vibrations. In this study, a dense time-series of MIMO radar data was collected and processed by proposing a framework based on persistent scatterer interferometry to obtain a map of pipeline vibrations. Experiments were conducted in a controlled environment consisting of both functional and inactive water pipelines. The results showed that the system could detect displacements from micrometre up to sub-millimetre levels, with a displacement error of less than 3 μm. Additionally, the radar could identify the dominant frequencies of 24.375 and 24.500 Hz even in pipelines with very small vibration patterns. These results validate the high potential of millimetre-wave MIMO radar systems for non-contact monitoring of micro-vibrations in pipelines. [ABSTRACT FROM AUTHOR]

The transmit waveform with ambiguity function specifications in the range‐Doppler plane has been of great interest in traditional single antenna radar systems in recent years. This paper considers the design of waveform sets with a desired slow‐time ambiguity function for multiple‐input multiple‐output radar. Specifically, it is desirable that the ambiguity function has low sidelobes where clutter occurs, as this reduces the impact of the clutter on target detection. Instead of unimodular waveforms, the authors consider amplitude modulation signals and introduce the bound constraint on signal amplitudes into the optimisation for the consideration of transmitter efficiency. The design problem is formulated as minimising the weighted integrated sidelobes level of the ambiguity function over the range‐Doppler plane under bound constraints. The resulting problem has a highly non‐linear objective function and is constrained by bound constraints and quadratic equality (constant energy) constraints, making it difficult to solve. The authors develop an efficient algorithm based on the sequential quadratic programming technique and non‐linear conjugate gradient method to solve it. Simulation results show that the proposed algorithm is superior to the existing methods. [ABSTRACT FROM AUTHOR]

Due to the controllable degrees of freedom of frequency diverse array in the distance dimension, the frequency diverse multiple‐input multiple‐output (FDA‐MIMO) radar can easily deal with mainlobe interference, which is often difficult to solve in traditional phased arrays. Nevertheless, the performance of FDA‐MIMO radar will suffer from degradation in the scenario where spectrum interferences and signal‐dependent interferences coexist. In order to solve this problem, a novel FDA‐MIMO radar framework via antenna switching is proposed. Based on this framework, an effective method for jointly optimising antenna selection and beamforming against spectrum interferences and signal‐dependent interferences is developed. The resulting optimization problem is nonconvex and NP‐hard owing to the integer constraints caused by antenna selection. By relaxing the integer constraints, the original problem can be transformed into a convex optimization form and an iterative reweighting strategy is used to force the obtained solution to satisfy the integer constraints. Simulation examples show that the proposed algorithm has better performance in output signal‐to‐interference‐plus‐noise ratio (SINR) and beampattern radiation performance than the existing competitive methods. [ABSTRACT FROM AUTHOR]

A cognitive radar (CR) system can offer enhanced target tracking performance due to its intelligence on the perception‐action cycle, wherein a CR adaptively allocates the limited transmitting resources based on its perception of surrounding environments. To effectively manage the transmit waveform resource for the target tracking task, CR resource management problem is formulated under the partially observable Markov decision process framework. The sequential decision‐making and the inherent partial observability for target tracking problem are considered. In the proposed method, a long short‐term memory (LSTM)‐based twin delayed deep deterministic policy gradient (TD3) algorithm is developed to effectively solve the problem. A reward function is designed considering Haykin's cognitive executive attention mechanism for radar systems such that the CR resource management policy has stability in the decision of transmit waveform, which follows the principle of minimum disturbance. Simulation results demonstrate the superiority of the proposed LSTM memory‐based TD3 with improved target tracking performance and increased mean rewards for CR. [ABSTRACT FROM AUTHOR]

To address the interference caused by multipath ghosts, this paper presents a multipath target discrimination method based on separated Gaussian similarity matrices. The proposed method utilizes separated Gaussian similarity functions based on the Maximum Likelihood principle to quantify the similarity from distance and angle perspectives. Meanwhile, dimensionality reduction is applied to maximize the distinction between multipath ghosts and actual targets. This method can effectively discriminate the multipath relationships and attributes of detected targets and has higher recognition accuracy than other geometry‐based methods. The effectiveness and superiority of the proposed method were validated through Monte‐Carlo and practical experiments. [ABSTRACT FROM AUTHOR]

DEXTER (detection of explosives and firearms to counter terrorism) is a project funded by NATO's Science for Peace and Security (SPS) program with the goal of developing an integrated system capable of remotely and accurately detecting explosives and firearms in public places without impeding the flow of pedestrians. While body scanner systems in secure areas of public places are becoming more and more efficient, the attack at Brussels airport on 22 March 2016, upstream of these systems, in the middle of the crowd of passengers, demonstrated the lack of discreet and real-time security against threats of mass terrorism. The NATO-SPS international and multi-year DEXTER project aims to provide new technical and strategic solutions to fill this gap. This project is based on multi-sensor coordination and fusion, from hyperspectral remote laser to smart glasses, artificial algorithms, and suspect identification and tracking. One of these sensors is dedicated to threat detection (large weapon or explosive belt) using the clothing of pedestrians by means of an active microwave component. This project is referred to as MIC (Microwave Imaging Curtain), also supported by the French SGDSN (General Secretariat of Defense and National Security), and utilizes a radar system capable of generating 3D images in real-time to address non-checkpoint detection of explosives and firearms. The project, led by ONERA (France), is based on a radar imaging system developed by the Fraunhofer FHR institute, using a MIMO architecture with an Ultra-Wide Band waveform. Although high-resolution 3D microwave imaging is already being used in expensive body scanners to detect firearms concealed under clothing, MIC's innovative approach lies in utilizing a high-resolution 3D imaging device that can detect larger dangerous objects carried by moving individuals at a longer range, in addition to providing discrete detection in pedestrian flow. Automatic detection and classification of these dangerous objects is carried out on 3D radar images using a deep-learning network. This paper will outline the project's objectives and constraints, as well as the design, architecture, and performance of the final system. Additionally, it will present real-time imaging results obtained during a live demonstration in a relevant environment. [ABSTRACT FROM AUTHOR]

With the development of 5G communication systems, it is a hot topic to embed integrated sensing and communication (ISAC) based on the existing 5G base station by sharing the hardware and the same frequency spectrum. In this paper, we propose a dual pulse repeated frequency (dual-PRF) waveform design of time-division ISAC (TD-ISAC) based on a 5G new radio (NR) communication system using downlink communication slots. We choose time-division mode to design waveform to avoid the interference between sensing and communication. Embedding sensing functions in a 5G NR system, we design a dual-PRF sensing slot to satisfy the constraints of common channel and uplink communication. Considering two uplink modes, namely flexible and fixed, we design two dual-PRF waveforms and illustrate the sensing theory performance of the designed waveform by the ambiguity function. Then, we exploit the designed waveform to the vehicle parameter estimation. To verify that the designed waveform has good adaptability to different signal processing methods, we realize the parameter estimation by two types of methods: the discrete Fourier transformation-based method and the compressed sensing-based method. At last, we verify the effectiveness of the designed waveform system by simulation experiments and real traffic scenarios. [ABSTRACT FROM AUTHOR]

Parameter estimation is an essential step for various MIMO radar applications and attracts the attention of many scholars. However, conventional methods typically model moving objects with a constant Doppler frequency shift under Gaussian distributed noise, which may fail in a real radar electromagnetic environment. To make up for the lack of research in this field, a multi-parameter estimation scheme for bistatic MIMO radar in the presence of time-varying Doppler frequency and impulsive noise is proposed. First, a novel operator which combines the deviation from the median-based correntropy (DMCE) and fractional power spectral density (FrPSD), termed DMCE-FrPSD, is defined, and boundedness proof is given to ensure the effectiveness of the proposed methods. Afterwards, Doppler parameters are estimated by peak searching of the DMCE-FrPSD spectrogram. Furthermore, two algorithms based on DMCE-FrPSD are proposed to estimate direction-of-arrival and direction-of-departure. Compared with the existing algorithms, the proposed scheme can estimate multiple parameters with higher accuracy and lower error even under intense impulsive noise. Comprehensive Monte Carlo simulations are carried out to verify the proposed scheme's superiority under various impulsive noise conditions. [ABSTRACT FROM AUTHOR]

• A phase duration calculation method is proposed based on multi-phase identification. • The components' fuzzy state probability vectors are acquired using the evidential reasoning rule. • A performance evaluation model of cyclic phased-mission systems is constructed by multi-valued decision diagrams. • A phase duration adjustment method based on the evaluation results is proposed. • The proposed method is verified by a performance evaluation case study on satellite turntable system. Phased-mission systems (PMS) often perform different missions that have multiple consecutive, non-overlapping phases. Many recent studies have focused on the reliability analysis for PMS. However, not much attention has been paid to the PMS performance evaluation and the phase cycle characteristic of PMS. In this paper, a performance evaluation method of non-repairable cyclic phased-mission systems (CPMS) is proposed. Considering the uncertainty caused by the change of phase duration and component performance degradation, the average duration of each phase and the fuzzy state probability vector of each component are obtained by the evidential reasoning rule (ER rule). Then, the multi-valued decision diagrams (MDD) manipulation rules suitable for cyclic phase conditions are proposed, and the component state composition path generation method based on cycle-end component states is developed. On the above basis, MDD models for CPMS (CPMS-MDD) in different states are established, and the system performance is evaluated by the continuous time Markov chains (CTMC). A phase duration adjustment strategy is further proposed based on the evaluation results. The effectiveness and correctness of the proposed method are verified by case studies on performance evaluation of satellite turntable system. Comparative study shows the concise and efficient of the proposed method. [ABSTRACT FROM AUTHOR]

This paper studies an optimization problem of antenna placement for multiple heading angles of the target in a distributed multiple-input multiple-output (MIMO) radar system. An improved method to calculate the system's coverage area in light of the changing target heading is presented. The antenna placement optimization problem is mathematically modelled as a sequential decision problem for compatibility with reinforcement learning solutions. A reinforcement learning agent is established, which uses the long short-term memory (LSTM)-based proximal policy optimization (PPO) method as the core algorithm to solve the antenna placement problem. Finally, the experimental findings demonstrate that the method can enhance the coverage area of antenna placement and thus has reference value for providing new ideas for the antenna placement optimization of distributed MIMO radar. [ABSTRACT FROM AUTHOR]

In this paper, we address the problem of covariance matrix estimation for radar adaptive detection under non-Gaussian clutter. Traditional model-based estimators may suffer from performance loss due to the mismatch between real data and assumed models. Therefore, we resort to a data-driven deep-learning method and propose a covariance matrix estimation method based on a complex-valued convolutional neural network (CV-CNN). Moreover, a real-valued (RV) network with the same framework as the proposed CV network is also constructed to serve as a natural competitor. The obtained clutter covariance matrix estimation based on the network is applied to the adaptive normalized matched filter (ANMF) detector for performance assessment. The detection results via both simulated and real sea clutter illustrate that the estimator based on CV-CNN outperforms other traditional model-based estimators as well as its RV competitor in terms of probability of detection (PD). [ABSTRACT FROM AUTHOR]

In this study, we investigated two waveform design problems for a dual-functional radar communication (DFRC) system, taking into consideration different constrained communication quality-of-service (QoS) requirements. Our objective was to minimize the mean-square error (MSE) of radar beampattern matching as the cost function. To this end, the multi-user interference (MUI) energy constraint and constructive interference (CI) constraint were, respectively, formulated to ensure the communication QoS. It is important to note that we designed a strict per-user MUI energy constraint at each sampling moment to achieve more accurate control over communication performance. Additionally, we introduced a constant-modulus constraint to optimize the efficiency of the radio frequency (RF) amplifier. To tackle the nonconvex waveform design problems encountered, we employed the alternative direction methods of multipliers (ADMM) technique. This allowed us to decompose the original problem into two solvable subproblems, which were then solved using the majorization–minimization (MM) method and geometrical structure. Finally, we obtained extensive simulation results which demonstrate the effectiveness and superiority of the proposed algorithm. [ABSTRACT FROM AUTHOR]

This paper mainly investigates the problem of direction of arrival (DOA) estimation for a monostatic MIMO radar. Specifically, the proposed array, which is called a nested–nested sparse array (NNSA), is structurally composed of two nested subarrays, a NA with N 1 + N 2 elements and a sparse NA, respectively, with N 3 + N 4 elements. The design process of NNSA is optimized into two steps and presented in detail. Setting NNSA as transmitter/receiver arrays, we derive the closed-form expression of consecutive DOFs and calculate the mutual coupling coefficient. Eventually, extensive simulations are carried out and the results verify the superiority of the proposed array over the previous arrays in terms of consecutive DOFs, array aperture and mutual coupling effect. [ABSTRACT FROM AUTHOR]