Search

Abstract Background Monosomy 1p36 is the most common terminal deletion syndrome with an autosomal dominant pattern of inheritance. This syndrome is defined by an extremely wide spectrum of characteristics; however, developmental delay and intellectual disability of various degree are present in all patients and about the 90% of patients have a severe intellectual disability. Dental agenesis or other dental anomalies have not been described in previous reports. Case presentation We report the case of two little sisters born from healthy and non-consanguineous parents, presenting with dental anomalies and one of them with epilepsy, dilated cardiomyopathy with left-ventricular non-compaction, strabismus, history of poor growth, hypotonia and mild language delay. Patients were evaluated in several departments (genetic, child neuropsychiatric, cardiology, odontostomatology, ophthalmology, otorhinolaryngology) of Institute for Maternal and Child Health, IRCCS Burlo Garofolo, Trieste, Italy. They underwent investigations such as electrocardiogram, echocardiogram, dental orthopantomography X-Ray and Computed Tomography, electroencephalograms, abdomen ultrasound, blood tests, IQ tests, genetic analysis. They both have an Intelligence Quotient greater than 70 and a negative neurologic exam. Each sister carries the same 1p36 deletion of about 2.3 Mb. Genetic analysis of the parents’ blood samples (Single Nucleotide Polymorphism- array, karyotype and Fluorescent In Situ Hybridization) did not reveal any deletion, translocation or inversion and confirmed the paternity. A third sib of the probands does not carry the 1p36 deletion or other quantitative alterations. Conclusion This report describes a new trait linked to monosomy 1p36, namely a mild intellectual outcome associated with significant dental anomalies. Our finding suggests that 1p36 deletion syndrome may present with a mild cognitive impairment or even with a normal intellectual development: this is very important for the genetic counselling, especially in a prenatal setting. Moreover, we report the third study with recurrent 1p36 deletion syndrome in two siblings, likely due to germline mosaicism. Finally, we believe that the dental anomalies should be investigated in 1p36 deletion syndrome and that the spectrum of the condition could be broader than we assume.

The study aimed to compare the adherence of Brazilian and Italian pediatric dentists to the biosafety measures and operative protocols recommended by the health authorities during COVID-19 pandemic and to classify the participants according to their risk of infection. An online questionnaire with 34 questions about sociodemographic and occupational data, dental practice organization, biological risk management, and clinical operative protocols was sent to Brazilian and Italian pediatric dentists using a convenience sampling strategy. Chi-square test and multivariate analysis (two-step cluster) were performed (α = 5%). Of 641 respondents (377 Brazilians and 264 Italians), most were female (94% and 70%, respectively), aged 20-39 years (63%), with over 10 years of professional experience (58% and 49%, respectively). Based on adherence to recommended biosafety measures, participants were classified as "safer" (n = 219) or "less safe" (n = 422). Adherence to recommended protocols by the majority of participants resulted in low contagion rates (Brazilians = 5%; Italians = 12.5%). Participants with extensive professional experience in the dental setting exhibited a greater tendency to implement multiple adaptations (three or more) in their practice. Most participants (Brazilians = 92%; Italians = 80.7%) adopted the recommended minimal intervention dentistry approaches, with the use of fissure sealants and the use of non-rotary instruments for caries removal the most frequently techniques used among Brazilians (36%) and Italians (66%), respectively. Two different profiles of pediatric dentists were identified based on the biosafety protocols adopted during the pandemic. In addition, changes were implemented in the dental care provided to children, with focus on the minimal intervention dentistry.

Bruxism is a worldwide oral health problem. Although there is a consensus about its multifactorial nature, its precise etiopathogenetic mechanisms are unclear. This study, taking advantage of a deeply characterized cohort of 769 individuals (aged 6-89 years) coming from Northern Italy's genetically isolated populations, aims to epidemiologically describe environmental risk factors for bruxism development and identify genes potentially involved through a Genome-Wide Association Study (GWAS) approach. Logistic mixed models adjusted for age and sex were performed to evaluate associations between bruxism and possible risk factors, e.g., anxiety, smoking, and alcohol and caffeine intake. A case-control GWAS (135 cases, 523 controls), adjusted for age, sex, and anxiety, was conducted to identify new candidate genes. The GTEx data analysis was performed to evaluate the identified gene expression in human body tissues. Statistical analyses determined anxiety as a bruxism risk factor (OR = 2.54; 95% CI: 1.20-5.38; p -value = 0.015), and GWAS highlighted three novel genes potentially associated with bruxism: NLGN1 (topSNP = rs2046718; p -value = 2.63 × 10 -7 ), RIMBP2 (topSNP = rs571497947; p -value = 4.68 × 10 -7 ), and LHFP (topSNP = rs2324342; p -value = 7.47 × 10 -6 ). The GTEx data analysis showed their expression in brain tissues. Overall, this work provided a deeper understanding of bruxism etiopathogenesis with the long-term perspective of developing personalized therapeutic approaches for improving affected individuals' quality of life.

Objectives: Currently, a classification of resin cements that includes relatively recently formulated ("universal") cements is lacking. Furthermore, the terminology used to define different resin cements in the scientific reports is inconsistent. Accordingly, this work aims to: (i) propose a novel classification of resin composite cements; (ii) disambiguate the term "universal cements" and (iii) present an overview of the properties of these cements., Methods: An analysis of peer-reviewed literature (PubMed search), as well as market research on definitive resin composite cements were performed., Results: A tendency toward simplified and versatile luting materials was observed both in the scientific literature and on the dental market with the advent of self-adhesive/one-step resin cements. However, additional priming procedures were necessary to improve their bonding performance in certain clinical situations. Hence, several cements that can be applied both in adhesive and self-adhesive mode were introduced. These cements are associated with a universal adhesive resin, that can be used as a tooth and/or restorative material primer, without the need for other priming systems, regardless of the substrate. These systems should be considered truly universal. Therefore, we hereby suggested a new classification of resin-based cements: (1) adhesive/multi-step; (2) self-adhesive/one-step; (3) universal cements (one- or multi-step). Despite promising in vitro results, clinical trials and long-track laboratory studies are necessary to confirm the reliability of the universal cements., Conclusions: This review presented the current advances in the field of resin-based cements, which are reflected in the proposed classification. The term "universal cement" was disambiguated, which will help standardize the terminology used in published research., Clinical Significance: The classification of resin-based cements and a better understanding of the proper terminology will help standardize the terminology in published research, as well as improve the understanding of the clinical practitioners of the different indications and possible modalities of use of the available cements., (© 2023 The Authors. Journal of Esthetic and Restorative Dentistry published by Wiley Periodicals LLC.)

Background: To investigate the effect of 0.3 M 1-ethyl-3(3-dimethylaminopropyl) carbodiimide (EDC) aqueous solution pretreatment on push-out bond strength (PBS) and matrix-metalloproteinases (MMPs) activity within radicular dentin when different post cementation strategies were employed., Methods: One hundred and twenty monoradicular human teeth were endodontically treated and randomly divided into six groups, depending on the cementation strategy and root dentin pretreatment (n = 20): EAR: cementation with an etch-and-rinse adhesive (LuxaBond Total Etch, DMG) and resin cement (LuxaCore Z Dual, DMG); EAR/EDC: 1 min EDC pretreatment after etching + EAR; SE: cementation with a self-etch primer (Multilink Primer, Ivoclar Vivadent) and corresponding cement (Multilink Automix, Ivoclar Vivadent); SE/EDC: self-etch primer + EDC pretreatment + SE; SA: cementation with a universal self-adhesive cement (RelyX Universal, 3 M); SA/EDC: EDC pretreatment + SA. Slices were submitted to PBS test and interfacial nanoleakage evaluation 24 h after cementation or after thermocycling (40.000 cycles, 5-55 °C). To investigate the effect of EDC on MMPs activity, 4 additional first maxillary premolars per group were processed for in situ zymography analysis. Multivariate ANOVA and post hoc Tukey tests were used to analyze PBS values. The data from in situ zymography were analyzed with Kruskal-Wallis test and Dunn's pairwise multiple comparison procedures (α = 0.05)., Results: The variables "EDC pretreatment", "root region" and "thermocycling" significantly influenced PBS (p < 0.05), while the variable "cementation strategy" had no influence (p > 0.05). Thermocycling significantly reduced PBS in SE and SA groups (p < 0.05). EDC was effective in preserving PBS after artificial aging. EDC pretreatment significantly reduced enzymatic activity at baseline in EAR and SE groups, and in SA group after thermocycling (p < 0.05)., Conclusions: The use of EDC prevents the reduction of bond-strength values after artificial aging and silences endogenous enzymatic activity within radicular dentin when different cementation strategies were employed., (© 2023. The Author(s).)

Objectives: The FDI criteria for the evaluation of direct and indirect dental restorations were first published in 2007 and updated in 2010. Meanwhile, their scientific use increased steadily, but several questions from users justified some clarification and improvement of the living document., Materials and Methods: An expert panel (N = 10) initiated the revision and consensus process that included a kick-off workshop and multiple online meetings by using the Delphi method. During and after each round of discussion, all opinions were collected, and the aggregated summary was presented to the experts aiming to adjust the wording of the criteria as precisely as possible. Finally, the expert panel agreed on the revision., Results: Some categories were redefined, ambiguities were cleared, and the descriptions of all scores were harmonized to cross-link different clinical situations with possible management strategies: reviewing/monitoring (score 1-4), refurbishment/reseal (score 3), repair (score 4), and replacement (score 5). Functional properties (domain F: fracture of material and retention, marginal adaptation, proximal contact, form and contour, occlusion and wear) were now placed at the beginning followed by biological (domain B: caries at restoration margin, hard tissue defects, postoperative hypersensitivity) and aesthetic characteristics (domain A: surface luster and texture, marginal staining, color match)., Conclusion: The most frequently used eleven categories of the FDI criteria set were revised for better understanding and handling., Clinical Relevance: The improved description and structuring of the criteria may help to standardize the evaluation of direct and indirect restorations and may enhance their acceptance by researchers, teachers, and dental practitioners., (© 2022. The Author(s).)

Malocclusions and temporomandibular disorders (TMDs) are oral health problems that are spread worldwide. To date, few studies focused on their prevalence and associated risk factors are available. This study aims to define the prevalence and distribution of odontostomatological traits and evaluate specific risk factors in isolated villages in north-eastern Italy, taking advantage of their environmental homogeneity. Nine hundred and forty-four participants aged six to eighty-nine years were enrolled. Thirty-one odontostomatological phenotypes, classified into five domains (airways, bad habits, extraoral and intraoral parameters, TMDs, and teeth), were evaluated. A descriptive statistical analysis was performed; mixed logistic models were used to test the relationships among the traits. According to the study's findings, Angle's class I was prevalent (65.3%) followed by class II malocclusion (24.3%); class III and reversed overjet were the least frequent malocclusions (10.4% and 1.8%, respectively). Temporomandibular joint (TMJ) click/noise was prevalent among TMDs (34.7%). The statistically significant ( p -value < 0.05) risk factors were ankyloglossia for phonetic issues (OR 1.90) and bruxism for TMJ click/noise (OR 1.70) and pain (OR 2.20). Overall, this work provides a picture of the prevalence of malocclusions and TMDs in a large Italian sample and reveals risk factors to take into account in the development of preventive strategies and treatments.

Objectives: The purpose of this in vitro reliability study was to determine the intra- and inter-examiner agreement of the revised FDI criteria including the categories "fracture of material and retention" (F1) and "caries at restoration margin" (B1)., Materials and Methods: Forty-nine photographs of direct tooth-coloured posterior (n = 25) and anterior (n = 24) restorations with common deficiencies were included. Ten dental experts repeated the assessment in three blinded rounds. Later, the experts re-evaluated together all photographs and agreed on a reference standard. Statistical analysis included the calculation of Cohen's (Cκ), Fleiss' (Fκ), and weighted Kappa (wκ), the development of a logistic regression with a backward elimination model and Bland/Altman plots., Results: Intra- and inter-examiner reliability exhibited mostly moderate to substantial Cκ, Fκ, and wκ values for posterior restorations (e.g. Intra: F1 Cκ = 0.57, wκ = 0.74; B1 Cκ = 0.57, wκ = 0.73/Inter F1 Fκ = 0.32, wκ = 0.53; B1 Fκ = 0.41, wκ = 0.64) and anterior restorations (e.g. Intra F1 Cκ = 0.63, wκ = 0.76; B1 Cκ = 0.48, wκ = 0.68/Inter F1 Fκ = 0.42, wκ = 0.57; B1 Fκ = 0.40, wκ = 0.51). Logistic regression analyses revealed significant differences between the evaluation rounds, examiners, categories, and tooth type. Both the intra- and inter-examiner reliability increased along with the evaluation rounds. The overall agreement was higher for anterior restorations compared to posterior restorations., Conclusions: The overall reliability of the revised FDI criteria set was found to be moderate to substantial., Clinical Relevance: If properly trained, the revised FDI criteria set are a valid tool to evaluate direct and indirect restorations in a standardized way. However, training and calibration are needed to ensure reliable application., (© 2022. The Author(s).)

There have been significant advances in adhesive dentistry in recent decades, with efforts being made to improve the mechanical and bonding properties of resin-based dental adhesive materials. Various attempts have been made to achieve versatility, introducing functional monomers and silanes into the materials' composition to enable the chemical reaction with tooth structure and restorative materials and a multimode use. The novel adhesive materials also tend to be simpler in terms of clinical use, requiring reduced number of steps, making them less technique sensitive. However, these materials must also be reliable and have a long-lasting bond with different substrates. In order to fulfill these arduous tasks, different chemical constituents and different techniques are continuously being developed and introduced into dental adhesive materials. This critical review aims to discuss the concepts behind novel monomers, bioactive molecules, and alternative techniques recently implemented in adhesive dentistry. Incorporating monomers that are more resistant to hydrolytic degradation and functional monomers that enhance the micromechanical retention and improve chemical interactions between adhesive resin materials and various substrates improved the performance of adhesive materials. The current trend is to blend bioactive molecules into adhesive materials to enhance the mechanical properties and prevent endogenous enzymatic degradation of the dental substrate, thus ensuring the longevity of resin-dentin bonds. Moreover, alternative etching materials and techniques have been developed to address the drawbacks of phosphoric acid dentin etching. Altogether, we are witnessing a dynamic era in adhesive dentistry, with advancements aiming to bring us closer to simple and reliable bonding. However, simplification and novelty should not be achieved at the expense of material properties.

Resin infiltration is a conservative treatment of initial enamel carious lesions. Only one infiltrant material is available on the market (Icon, DMG), and research is now investigating new chemical compositions so as to further exploit the benefits of the resin infiltration technique. A literature search of the articles testing the effects of different formulations on mechanical properties, resin penetration ability, remineralizing, and antibacterial activities was conducted. Of 238 articles, 29 resulted in being eligible for the literature review. The formulations investigated were all different and consisted in the inclusion of hydrophobic monomers (i.e., BisEMA, UDMA), solvents (ethanol, HEMA), alternative etchants (PAM) or molecules with antibacterial or bioactivity features (i.e., AgNP, YbF 3, MTZ, chitosan, DMAMM, HAp, MC-IL, NACP, PUA, CHX) and microfilled resins. Information on the long-term performances of the tested experimental materials were scarce. The combination of TEGDMA with hydrophobic monomers and the inclusion of a solvent alternative to ethanol reinforced mechanical properties of the materials. Hybrid-glass materials demonstrated an enhanced remineralization capacity. Techniques such as tunnelization increased the penetration depth and preserved the recourse to less-conservative treatments. Combining the min-invasive infiltrant approach with remineralizing and bacteriostatic properties would be beneficial for therapeutic and economical aspects, according to the principles of minimally invasive dentistry.

The latest advancements in dentin bonding have focused on strategies to impair degradation mechanisms in order to extend the longevity of bonded interfaces. Protease inhibitors can reduce collagen degradation within the hybrid layer (HL). Collagen cross-linkers allow better adhesive infiltration and also inhibit proteases activity. Particles added to adhesive can promote mineral precipitation within the HL, reducing nanoleakage and micropermeability, besides possible antimicrobial and enzymatic inhibition effects. Most of these approaches are still experimental, and aspects of the adhesive under the clinician's control are still determinant for the long-term stability of adhesive restorations., Competing Interests: Disclosure The authors have nothing to disclose., (Copyright © 2022 Elsevier Inc. All rights reserved.)

Purpose: The purpose of this study was to evaluate resin infiltration (RI) technique's effects on the in vivo functional treatment of molar hypomineralization (MH)-affected permanent first molars (PFMs). Methods: Fifteen MH-affected PFMs were resin-infiltrated and evaluated for a three-month follow-up (FU). In vivo resin replicas were used for profilometric and scanning electron microscope (SEM) analysis of PFM surfaces; any variation of clinical aspect and dentin hypersensitivity was registered as: T0 equals baseline; T1 equals right after treatment; T2 equals oneweek follow-up; and T3, T4, and T5 equal one-, two-, and three-month FU. Results: At T0, MH-affected surfaces were rougher and more irregular than sound ones; at T1, resin-infiltrated surfaces were smoother while a progressive increase of superficial roughness was observed over time. Hypersensitivity improved at T1 and remained stable over time in severe MH cases. Conclusions: Resin infiltration seems to be a promising treatment, especially in managing severe molar hypomineralization cases for the evaluated follow-up.

This in vitro study aimed to evaluate the influence of curing time on surface characteristics and microbiological behavior of three bulk-fill resin-based composites (RBCs). Materials were light-cured for either 10 s or 80 s, then finished using a standard clinical procedure. They were characterized by surface morphology (SEM), surface elemental composition (EDS), surface roughness (SR), and surface free energy (SFE). Microbiological behavior was assessed as S. mutans adherence (2 h) and biofilm formation (24 h) using a continuous-flow bioreactor. Statistical analysis included a two-way ANOVA and Tukey's test ( p < 0.05). Materials differed substantially as filler shape, dimension, elemental composition and resin matrix composition. Significant differences between materials were found for SR, SFE, and microbiological behavior. Such differences were less pronounced or disappeared after prolonged photocuring. The latter yielded significantly lower adherence and biofilm formation on all tested materials, similar to conventional RBCs. Improved photoinitiators and UDMA-based resin matrix composition may explain these results. No correlation between surface characteristics and microbiological behavior can explain the similar microbiological behavior of bulk-fill materials after prolonged photocuring. This different performance of bulk-fill materials compared with conventional RBCs, where surface characteristics, especially surface chemistry, influence microbiological behavior, may have important implications for secondary caries occurrence and restoration longevity.

Matrix metalloproteinases (MMPs) play an important role in tooth development and influence caries development and hybrid layer degradation. Literature is scant on the differences in the activity of MMPs between primary and permanent dentine. Accordingly, the aim of the present study was to investigate endogenous gelatinolytic activity in primary and permanent dentine. Separate batches of dentine powder were obtained from intact human primary and permanent molars ( n = 6). Each batch was divided in two subgroups: (1) mineralised; and (2) demineralised with 10% H 3 PO 4 . After protein extraction, gelatine zymography was performed. Furthermore, in situ zymography was performed on dentine sections of the same groups ( n = 3). The slices were polished, covered with fluorescein-conjugated gelatine and evaluated using a confocal microscope. In situ zymography data were analysed using two-way analysis of variance and post hoc Holm-Šidák statistics (α = 0.05). Primary dentine showed poorly defined bands in the zymograms that vaguely corresponded to the pro-form and active form of MMP-2 and the pro-form of MMP-9. In permanent dentine, demineralised powder demonstrated stronger gelatinolytic activity than mineralised powder. In situ zymography identified stronger enzymatic activity in primary etched dentine ( p < 0.05). Stronger enzymatic activity recorded in primary dentine may be related to the differences in morphology and composition between primary and permanent dentine.

Nine antibacterial di-methacrylate monomers based on bis-quaternary ammonium salts (bis-QAMs) were synthesized and structurally characterized. The biological activity of the bis-QAMs was tested in terms of minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) on different bacterial strains achieving promising results and, in most cases, a complete bactericidal effect using a bis-QAM concentration lower than 1 mg/mL. Two of the structures showed comparable and superior activity against S. mutans than the commercial monomer 12-methacryloyloxydodecyl pyridinium bromide (MDBP). All the bis-QAMs here described were able to inhibit S. mutans biofilm formation at a concentration equal to the MIC value. From the analysis of the obtained data, some correlation regarding the structure and the antibacterial activity of the bis-QAMs could be drawn: a flexible alkyl C 12 spacer between the two quaternary ammonium moieties increased the monomer antibacterial effect in comparison to the aromatic ones; the equilibrium between hydrophobic and hydrophilic moieties was directly correlated to the bactericidal range of action; the increase of the steric hindrance of the ammonium side groups might be both advantageous or disadvantageous to the antibacterial efficacy depending on the whole monomer chemical structure. Even though the possible correlation between the monomer structures and their bacteriostatic or bactericidal effect is under investigation, the monomers exhibited low cytotoxicity on human dental pulp stem cells, confirming their promising potential in the dental materials' field. STATEMENT OF SIGNIFICANCE: The use of dental resins with antibacterial monomers might prevent the formation of secondary caries at the restoration margins. For this purpose, a series of di-methacrylate bis-quaternary ammonium monomers (QAMs) was developed. Unlike antibacterial mono-methacrylate monomers already described in the literature, the synthesized di-methacrylate monomers have the potential of acting as cross-linkers stabilizing the polymeric network and bear two quaternary ammonium groups that increase their antibacterial ability. The QAMs exert bactericidal activity on both Gram(+) and Gram(-) bacterial strains maintaining at the same time good biocompatibility with the oral environment. Some structural elements of the monomers were clearly related to high antibacterial properties, and this can help design new active structures and better understand their mechanism of action., Competing Interests: Declaration of Competing Interest The authors declare to be also the inventors of the patent presenting the structures and activity of the newly synthesized monomers. All authors disclose any financial and personal relationships with other people or organizations that could inappropriately influence (bias) their work. The authors confirm that there has been no significant financial support for this work that could have influenced its outcome., (Copyright © 2021 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

The aim of this in vitro study was to evaluate the hardness and shrinkage stress (SS) of six bulk-fill resin composites. To evaluate microhardness (MH), ten 6 mm specimens were prepared using a metal mold for each selected bulk-fill resin composite and irradiated from the top side for 40 s using an LED light. After 24 h of storage, Vickers MH was evaluated on the upper, lower and lateral sides of the specimens. SS evaluation was then performed with a universal machine, which evaluated the contraction force generated by a bulk-fill composite specimen placed between two metal cylinders during and after light curing. The results were evaluated with a one-way ANOVA test with a post-hoc Bonferroni test and linear regression analysis ( p < 0.05). All materials showed a significant MH decrease between the top and bottom surfaces. However, the bulk-fill materials tested performed differently when considering lateral depth progression. ANOVA tests for SS evaluation showed that both SDR and Venus Bulk Fill had significantly lower stress during irradiation than other tested materials. Further, MH decrease became significantly lower from the top surface at different depths in each tested group. Among the different resins, Venus Bulk Fill and SDR showed not only inferior hardness, but also a significant reduction in SS.

Background: Monosomy 1p36 is the most common terminal deletion syndrome with an autosomal dominant pattern of inheritance. This syndrome is defined by an extremely wide spectrum of characteristics; however, developmental delay and intellectual disability of various degree are present in all patients and about the 90% of patients have a severe intellectual disability. Dental agenesis or other dental anomalies have not been described in previous reports., Case Presentation: We report the case of two little sisters born from healthy and non-consanguineous parents, presenting with dental anomalies and one of them with epilepsy, dilated cardiomyopathy with left-ventricular non-compaction, strabismus, history of poor growth, hypotonia and mild language delay. Patients were evaluated in several departments (genetic, child neuropsychiatric, cardiology, odontostomatology, ophthalmology, otorhinolaryngology) of Institute for Maternal and Child Health, IRCCS Burlo Garofolo, Trieste, Italy. They underwent investigations such as electrocardiogram, echocardiogram, dental orthopantomography X-Ray and Computed Tomography, electroencephalograms, abdomen ultrasound, blood tests, IQ tests, genetic analysis. They both have an Intelligence Quotient greater than 70 and a negative neurologic exam. Each sister carries the same 1p36 deletion of about 2.3 Mb. Genetic analysis of the parents' blood samples (Single Nucleotide Polymorphism- array, karyotype and Fluorescent In Situ Hybridization) did not reveal any deletion, translocation or inversion and confirmed the paternity. A third sib of the probands does not carry the 1p36 deletion or other quantitative alterations., Conclusion: This report describes a new trait linked to monosomy 1p36, namely a mild intellectual outcome associated with significant dental anomalies. Our finding suggests that 1p36 deletion syndrome may present with a mild cognitive impairment or even with a normal intellectual development: this is very important for the genetic counselling, especially in a prenatal setting. Moreover, we report the third study with recurrent 1p36 deletion syndrome in two siblings, likely due to germline mosaicism. Finally, we believe that the dental anomalies should be investigated in 1p36 deletion syndrome and that the spectrum of the condition could be broader than we assume.

Objective: The present study investigated the ability of a chlorhexidine (CHX)-containing primer (0.2% aqueous solution) to inhibit dentinal enzymes, preserve the hybrid layer (HL) and remain within the HL, after 10 years of aging in artificial saliva at 37°C., Methods: Non-carious extracted molars were assigned to two groups, cut into slabs exposing middle/deep dentin, etched and bonded with Adper Scotchbond 1XT (SB1XT) with or without 0.2% CHX aqueous solution pretreatment. Composite build-ups were made, and the specimens were cut in 1-mm thick bonded sticks. In situ zymography was performed on freshly prepared specimens (T 0 ) and specimens aged for 10 years (T 10-yr ) at 37°C in artificial saliva, to investigate endogenous gelatinolytic activity within the HL. At T 10-yr , specimens were also decalcified and embedded in epoxy resin for TEM analysis. Micro-Raman spectroscopy was performed at T 0 and T 10-yr to evaluate the chemical profiles in intertubular dentin and the HL., Results: In situ zymography showed less pronounced enzymatic activity in the CHX-pretreated group (p<0.05) regardless of aging, maintaining a similar level of fluorescence at T 0 and T 10-yr (p>0.05). TEM results showed that 98% of the HL had been degraded in the control group, while 95% of the HL was intact in the experimental group. Moreover, all the Raman spectra peaks assigned to CHX could be identified only in the CHX-pretreated group (T 0 and T 10-yr )., Significance: In vitro, CHX remains in the HL after 10 years with its inhibitory effect preserved. This may be the underlying factor for HL preservation after this long aging period., (Copyright © 2020 The Academy of Dental Materials. Published by Elsevier Inc. All rights reserved.)

Objectives: The aim of this study was to investigate, by the means of microtensile bond strength (μTBS) test, gelatin and in situ zymography, the influence of 0.2% CHX contained within a commercially available adhesive on long-term bond strength and endogenous enzymatic activity., Methods: Non-carious teeth were subjected to μTBS test (N = 15 for each group) and stressed until failure. μTBS was evaluated immediately and after 12-month storage in artificial saliva at 37 °C. Dentin powder was obtained from additional teeth (N = 7) for gelatin zymography, while for in situ zymography, 3 teeth for each group were selected. Gelatin and in situ zymography were performed in dentin powder and slices of dentin, respectively, to assess the ability of 0.2% CHX blended within the adhesive to inhibit endogenous enzymatic activity., Results: μTBS bond strength was higher in the CHX-containing groups, immediately as well as after aging. The bond strength significantly decreased after 12-month aging. The activation of endogenous MMPs was found to be related to the presence of CHX within the adhesive system and the bonding strategy employed., Conclusions: Under this perspective 0.2% CHX blended within Peak Universal adhesive monomer seems to increase immediate bond strength, to preserve bond strength over time and to efficiently inhibit endogenous enzymatic activity in dentin. Hence, blending the CHX in low concentrations within the adhesive could be recommended as a feasible technique in every-day clinical practice., Clinical Significance: Using CHX-containing adhesives could be recommended due to several benefits: it seems to increase the longevity of the hybrid layer; the inhibitor appears to be efficiently delivered to the dentinal substrate and to inhibit endogenous enzymatic activity, without prolonging chair time., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Objectives: Stresses produced during the fabrication of copings and by chewing activity can induce a tetragonal-to-monoclinic (t⁻m) transformation of zirconia. As a consequence, in the m-phase, the material is not able to hinder possible cracks by the favorable mechanism known as "transformation toughening". This study aimed at evaluating if different marginal preparations of zirconia copings can cause a premature phase transformation immediately after manufacturing milling and after chewing simulation., Methods: Ninety copings using three commercial zirconia ceramics (Nobel Procera Zirconia, Nobel Biocare Management AG; Lava Classic, 3M ESPE; Lava Plus, 3M ESPE) were prepared with deep-chamfer, slight-chamfer, or feather-edge finish lines (n = 10). Specimens were tested in a chewing simulator (CS-4.4, SD Mechatronik) under cyclic occlusal loads simulating one year of clinical service. Raman spectra were acquired and analyzed for each specimen along the finish lines and at the top of each coping before and after chewing simulation, respectively., Results: Raman analysis did not show any t⁻m transformation both before and after chewing simulation, as the typical monoclinic bands at 181 cm -1 and 192 cm -1 were not detected in any of the tested specimens., Conclusions: After a one-year simulation of chewing activity, irrespective of preparation geometry, zirconia copings did not show any sign of t⁻m transformation, either in the load application areas or at the margins. Consequently, manufacturing milling even in thin thickness did not cause any structural modification of zirconia ceramics "as received by manufacturers" both before and after chewing simulation., Competing Interests: The authors declare no conflicts of interest.

Adhesive systems are resin-based materials that reach their final mechanical properties through a polymerization process. Previous literature correlated the failure of the adhesive interface to low polymer setting. Adhesives systems are elaborate mixtures of different molecules of both hydrophilic and hydrophobic nature, included in the formulation to adequately infiltrate the complex dental substrate or added to prolong the stability of the adhesive layer over time. Each adhesive component may influence the polymerization reaction of the material. Photopolymerization is a complex reaction that has several clinical implications, and besides the material composition, it is influenced by multiple factors, including the substrate characteristics, the operator technique, and the light cure unit properties. This review is focused on the analysis of factors that have a potential role in the setting of adhesive materials and thus the ultimate characteristics of the adhesive layer and the stability of the resin-dentin interface., (Copyright © 2018 The Academy of Dental Materials. Published by Elsevier Inc. All rights reserved.)

Purpose: The aim of this in vitro study was to assess conversion degree (DC), micro-hardness (MH) and bond strength of two dual-curing resin cements employed under translucent monolithic zirconia irradiated with different time protocols., Methods: 84 square shaped samples of 1mm thickness were prepared from high translucency zirconia blocks and divided into two groups (n=24) according to the cement employed: (1) Rely-X Ultimate; (2) Panavia SA. Each group was further divided into 3 subgroups (n=8) according to the irradiation time: (a) no light; (b) 20s; (c) 120s. Light curing was performed 60s after the sample was placed on the diamond support of a FT-IR spectrophotometer with a high power multiLED lamp. Final DC% were calculated after 10min. After 24h, Vickers Test on the cement layer was performed. The same protocol was used to lute composite cylinders in order to evaluate microshear bond-strength test. ANOVA and Bonferroni tests were performed to find differences between MH and bond-strength to zirconia, while for DC% the Scheirer-Ray-Hare two-way test was used., Results: The two cements reached higher DC% in subgroup (b) and (c). As concern MH, statistics showed an increase in curing time was able to improve MH significantly. Bond-strength was not affected by irradiation time only for Panavia SA., Conclusions: The first null hypothesis has to be rejected since DC% and MH of the dual-cements tested were influenced by the curing time. The second null hypothesis is partially rejected since the bond strength was influenced by the curing time only for Rely-X Ultimate., (Copyright © 2018 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.)

Background: Work-related musculoskeletal (MS) disorders are very common among dentists due to abnormal positions maintained during their work. There is the need to teach undergraduate students ergonomic procedures to prevent MS pain and disorders., Methods: All the students of the School of Dentistry at the University of Trieste were enrolled for the study (No. 55). A self-administered questionnaire was used to collect anthropometric information, previous or current diseases, MS pain and disorders and work tasks performed. All students attended a training course. Three months after the training they completed a follow-up questionnaire., Results: All students reported MS pain: higher at cervical level (91%), lower at lumbosacral level (64.2%), shoulders (43.6%), and wrist/hand level (41.8%). Forty-nine percent of students reported an improvement in pain symptoms (p<0.05) 3 months after the training., Conclusions: The prevalence of pain symptoms was high but the training course helped reduce symptoms. Theory and practice of ergonomics should be incorporated into dental undergraduate curricula.

Objective: The present study evaluated the influence of time, mass and surface area of demineralized dentin collagen matrices on telopeptides release. The hypotheses tested were that the rates of ICTP and CTX release by matrix bound endogenous proteases are 1) not time-dependent, 2) unrelated to specimen mass, 3) unrelated to specimen surface area., Methods: Non-carious human molars (N=24) were collected and randomly assigned to three groups. Dentin slabs with three different thicknesses: 0.37mm, 0.75mm, and 1.50mm were completely demineralized and stored in artificial saliva for one week. Collagen degradation was evaluated by sampling storage media for ICTP and CTX telopeptidases. Activity of MMPs in the aging medium was evaluated using fluorometric activity assay kit., Results: A statistically significant (p<0.05) decrease in the release of both ICTP and CTX fragments over time was observed irrespective of the specimen thickness. When data were normalized by the specimen mass, no significant differences were observed. Releases of ICTP and CTX were significantly related to the aging time as a function of surface area for the first 12h. Total MMP activity, mainly related to MMP-2 and -9, decreased with time (p<0.05)., Significance: Because the release of collagen fragments was influenced by specimen storage time and surface area, it is likely that cleaved collagen fragments closer to the specimen surface diffuse into the incubation medium; those further away from the exposed surface are still entrapped within the demineralized dentin matrix. Bound MMPs can only degrade the substrate within the limited zone of their molecular mobility., (Copyright © 2017 The Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.)

Objective: The objectives of the study were to evaluate the ability of a 1-ethyl-3 (3-dimethylaminopropyl) carbodiimide (EDC)-containing primer to improve immediate bond strength of either self-etch or etch-and-rinse adhesive systems and to stabilize the adhesive interfaces over time. A further objective was to investigate the effect of EDC on the dentinal MMPs activity using zymographic analysis., Methods: Freshly extracted molars (n=80, 20 for each group) were selected to conduct microtensile bond strength tests. The following groups were tested, immediately or after 1-year aging in artificial saliva: G1: Clearfil SE (CSE) primer applied on unetched dentin, pretreated with 0.3M EDC water-solution for 1min and bonded with CSE Bond; G2: as G1 but without EDC pre-treatment; G3: acid-etched (35% phosphoric-acid for 15s) dentin pretreated with 0.3M EDC, then bonded with XP Bond (XPB); Group 4 (G4): as G3 without EDC pre-treatment. Further, gelatinase activity in dentin powder treated with CSE and XPB with and without EDC pre-treatment, was analyzed using gelatin zymography., Results: The use of 0.3M EDC-containing conditioner did not affect the immediate bond strength of XPB or CSE adhesive systems (p>0.05), while it improved the bond strength after 1year of aging (p<0.05). Pre-treatment with EDC followed by the application of CSE resulted in an incomplete MMPs inactivation, while EDC pretreatment followed by the application of XPB resulted in an almost complete inactivation of dentinal gelatinases., Significance: The μTBS and zymography results support the efficacy of EDC over time and reveal that changes within the dentin matrix promoted by EDC are not adhesive-system-dependent., (Copyright © 2017 The Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.)

Objectives: Efforts towards achieving durable resin-dentin bonds have been made for decades, including the understanding of the mechanisms underlying hybrid layer (HL) degradation, manufacturing of improved adhesive systems, as well as developing strategies for the preservation of the HL., Methods: This study critically discusses the available peer-reviewed research concerning the formation and preservation of the HL, the mechanisms that lead to the degradation of the HL as well as the strategies to prevent it., Results: The degradation of the HL occurs through two main mechanisms: the enzymatic degradation of its collagen fibrils, and the leaching of the resin from the HL. They are enabled by residual unbound water between the denuded collagen fibrils, trapped at the bottom of the HL. Consequently, endogenous dentinal enzymes, such as the matrix metalloproteinases (MMPs) and cysteine cathepsins are activated and can degrade the denuded collagen matrix. Strategies for the preservation of the HL over time have been developed, and they entail the removal of the unbound water from the gaps between the collagen fibrils as well as different modes of silencing endogenous enzymatic activity., Significance: Although there are many more hurdles to be crossed in the field of adhesive dentistry, impressive progress has been achieved so far, and the vast amount of available research on the topic is an indicator of the importance of this matter and of the great efforts of researchers and dental material companies to reach a new level in the quality and longevity of resin-dentin bonds., (Copyright © 2017 The Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.)

Objective: The objective of this work, commissioned by the Academy of Dental Materials, was to review and critically appraise test methods to characterize properties related to critical issues for dental resin composites, including technique sensitivity and handling, polymerization, and dimensional stability, in order to provide specific guidance to investigators planning studies of these properties., Methods: The properties that relate to each of the main clinical issues identified were ranked in terms of their priority for testing, and the specific test methods within each property were ranked. An attempt was made to focus on the tests and methods likely to be the most useful, applicable, and supported by the literature, and where possible, those showing a correlation with clinical outcomes. Certain methods are only briefly mentioned to be all-inclusive. When a standard test method exists, whether from dentistry or another field, this test has been identified. Specific examples from the literature are included for each test method., Results: The properties for evaluating resin composites were ranked in the priority of measurement as follows: (1) porosity, radiopacity, sensitivity to ambient light, degree of conversion, polymerization kinetics, depth of cure, polymerization shrinkage and rate, polymerization stress, and hygroscopic expansion; (2) stickiness, slump resistance, and viscosity; and (3) thermal expansion., Significance: The following guidance is meant to aid the researcher in choosing the most appropriate test methods when planning studies designed to assess certain key properties and characteristics of dental resin composites, specifically technique sensitivity and handling during placement, polymerization, and dimensional stability., (Copyright © 2017 The Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.)

Objective: The objective of this project, which was initiated from the Academy of Dental Materials, was to review and critically appraise methods to determine fracture, deformation and wear resistance of dental resin composites, in an attempt to provide guidance for investigators endeavoring to study these properties for these materials., Methods: Test methods have been ranked in the priority of the specific property being tested, as well as of the specific test methods for evaluating that property. Focus was placed on the tests that are considered to be of the highest priority in terms of being the most useful, applicable, supported by the literature, and which show a correlation with clinical findings. Others are mentioned briefly for the purpose of being inclusive. When a standard test method exists, including those used in other fields, these have been identified in the beginning of each section. Also, some examples from the resin composite literature are included for each test method., Results: The properties for evaluating resin composites were ranked in the priority of measurement as following: (1) Strength, Elastic Modulus, Fracture toughness, Fatigue, Indentation Hardness, Wear-abrasion (third body) and Wear-attrition (contact/two body), (2) Toughness, Edge strength (chipping) and (3) Wear determined by toothbrush., Significance: The following guidance is meant to aid the researcher in choosing the proper method to assess key properties of dental resin composites with regard to their fracture, deformation and wear resistance., (Copyright © 2017 The Academy of Dental Materials. All rights reserved.)

Purpose: To examine the effect of CHX pre-treatment on long-term bond strength of fiber posts luted with self-adhesive resin cements., Materials and Methods: Seventy-two single-rooted teeth were selected for root canal treatment and post space preparation. The tested self-adhesive cement/post combinations were (N = 36): 1. RelyX Fiber-Posts luted with RelyX Unicem; 2. Rebilda Posts luted with Bifix SE Cement. For both self-adhesive cements, half of the specimens (experimental groups) were luted after the application of a solution of 2% CHX, while no CHX application was performed for the remaining specimens (control groups). Luted specimens were cut and used for push-out bond strength evaluation immediately, and after storage in artificial saliva for 6 months or 1 year. Additional specimens were processed for quantitative interfacial nanoleakage analysis., Results: ANOVA showed that the variable times of storage had a significant influence on the results (p < 0.05), while no influence of the luting procedure (cements with or without CHX) on the final outcome (p > 0.05) was found. Tukey's pairwise post-hoc test showed that the radicular bond strength decreased with time of storage. In particular, a significant difference was found between T0 and T1y, but not between T0 and T6m. In contrast, in terms of pretreatment, no significant reduction in push-out bond strength was observed, irrespective of the aging time., Conclusion: CHX pretreatment did not prevent bond strength degradation of fiber posts luted with self-adhesive cements.

Purpose: Degree of conversion (DC) affects the physicochemical properties of dental adhesives. The aim of this study was to measure the DC within the hybrid layer of four one-step self-etch adhesives using Raman microspectroscopy. The hypothesis tested was that there was no difference among the tested adhesives., Methods and Materials: The selected one-step self-etch adhesives (Clearfil S 3 Bond Plus, I-BOND, G-BOND, and Adper Easy Bond) were applied on human dentin disks and polymerized in accordance with the manufacturers' instructions. Specimens were transversally cut to expose the bonded interfaces to the micro-Raman beam, and Raman spectra were collected along the dentin/adhesive interface. Measurements were performed at 1-μm intervals. The relative intensities of bands associated with the C=C bond (at 1640 cm -1 ) and an internal stable peak (1610 cm -1 ) were determined to calculate the degree of conversion within the hybrid layer. Data were statistically analyzed with Kolmogorov-Smirnov and Bartlett tests and Kruskal-Wallis and Mann-Whitney U-tests., Results: The DC ranked as follows: G-BOND (93%±6%) ≥ Adper Easy Bond (92%±6%) ≥ I-BOND (89%±7%) > Clearfil S3 Bond Plus (80%±14%) (p<0.05)., Conclusions: Based on the results of this study, all of the tested self-etch adhesives showed a clinically acceptable DC that was material dependent.