Search

A structural adhesive series of biomass-based polyurethane (Biomass-PU) is synthesized using polypropylene glycol (PPG2000), isosorbide-based polyol (RPO300) as polyols, isophorone diisocyanate (IPDI) as an isocyanate and 4-tert-butylphenol (BP) as a capping agent. Three different equivalent ratios of PPG2000/RPO300, 9/1 (Biomass-PU1), 7/3 (Biomass-PU2), and 1/1 (Biomass-PU3), are evaluated to determine the effect of isosorbide-based polyol content on the properties and the optimizing formulation of biomass-PU structure adhesive. The 9/1 ratio of PPG2000/RPO300 substantially leads to the improvement of impact strength by up to 35 MPa, and the PPG2000/RPO300 = 9/1 ratio exhibits better thermal properties and impact strength than those of other ratios. To achieve more compatibility between biomass-PU structure adhesive and core-shell rubber (CSR) toughener, novel CSRs are successfully synthesized using acryl-PU as a shell and biomass-based PU as a core. The chemical structure of biomass-PU structure adhesives is analyzed through FT-IR Spectroscopy and NCO% titration. Thermal properties are evaluated using TGA and DSC analysis. Their molecular weights are measured by GPC. Also, the core-shell rubber (CSR) with a polyurethane shell is prepared to reinforce the impact strength of Biomass-PU structure adhesive., (© 2024. The Author(s).)

Urethane acrylate (UA) was synthesized from various di-polyols, such as poly(tetrahydrofuran) (PTMG, Mn = 1000), poly(ethylene glycol) (PEG, Mn = 1000), and poly(propylene glycol) (PPG, Mn = 1000), for use as a polymer binder for paint. Polymethyl methacrylate (PMMA) and UA were blended to form an acrylic resin with high transmittance and stress-strain curve. When PMMA was blended with UA, a network structure was formed due to physical entanglement between the two polymers, increasing the mechanical properties. UA was synthesized by forming a prepolymer using di-polyol and hexamethylene diisocyanate, which were chain structure monomers, and capping them with 2-hydroxyethyl methacrylate to provide an acryl group. Fourier transform infrared spectroscopy was used to observe the changes in functional groups, and gel permeation chromatography was used to confirm that the three series showed similar molecular weight and PDI values. The yellowing phenomenon that appears mainly in the curing reaction of the polymer binder was solved, and the mechanical properties according to the effects of the polyol used in the main chain were compared. The content of the blended UA was quantified using ultravioletvisible spectroscopy at a wavelength of 370 nm based on 5, 10, 15, and 20 wt%, and the shear strength and tensile strength were evaluated using specimens in a suitable mode. The ratio for producing the polymer binder was optimized. The mechanical properties of the polymer binder with 5-10 wt% UA were improved in all series.

Background: The prevalence and impact of sarcopenia and sarcopenic obesity noted on body composition analysis in severe acute pancreatitis (SAP) is unknown. This study investigates the prevalence of sarcopenia at different timepoints and its effect on post-pancreatitis complications and mortality., Methods: A prospective database of SAP admissions with organ failure at a single institution from 2015 to 2019 were analysed. Sarcopenia was determined by IMAGE J software on CT. Database was further queried for post-pancreatitis complications and mortality., Results: 141 patients with a median age of 59 (range 18-88) and M:F ratio 1.52:1 of were analysed. Sarcopenia was present in 111/141 (79%) patients at admission, 78/79 (99%) at 3 months and 26/36 (72%) at 12 months. 67/111 patients with sarcopenia on admission had sarcopenic obesity. The mortality at 30 days, 3 months and 12 months was 16/141 (11%), 30/141 (21%) and 42/141 (30%) respectively. Mortality was significantly higher in sarcopenic patients at admission (35.14%) compared to the non-sarcopenic group (10%), P = 0.008). Mortality in the sarcopenic obesity group was significantly higher (45%) compared to the sarcopenic non-obese group (20%), P = 0.009) at admission. Multivariate logistic regression identified sarcopenic obesity (OR: 2.880), age (OR: 1.048) and number of organ failures (OR: 3.225) as significant predictors of mortality., Conclusions: Sarcopenia and Sarcopenic obesity are highly prevalent in SAP patients on admission and during follow up. Furthermore, sarcopenic obesity was shown to be a significant predictor of mortality at admission, suggesting that body composition analysis could be a potential predictive marker of mortality in SAP patients., (© 2023. The Author(s).)

Background: Post-operative pancreatic fistula (POPF) is the primary cause of morbidity following pancreaticoduodenectomy. Rates of POPF have remained high despite well known risk factors. The theory that hypoperfusion of the pancreatic stump leads to anastomotic failure has recently gained interest., Aim: To define the published literature with regards to intraoperative pancreas perfusion assessment and its correlation with POPF., Methods: A systematic search of available literature was performed in November 2022. Data extracted included study characteristics, method of assessment of pancreas stump perfusion, POPF and other post-pancreatic surgery specific complications., Results: Five eligible studies comprised two prospective non-randomised studies and three case reports, total 156 patients. Four studies used indocyanine green fluorescence angiography to assess the pancreatic stump, with the remaining study assessing pancreas perfusion by visual inspection of arterial bleeding of the pancreatic stump. There was significant heterogeneity in the definition of POPF. Studies had a combined POPF rate of 12%; intraoperative perfusion assessment revealed hypoperfusion was present in 39% of patients who developed POPF. The rate of POPF was 11% in patients with no evidence of hypoperfusion and 13% in those with evidence of hypoperfusion, suggesting that not all hypoperfusion gives rise to POPF and further analysis is required to analyse if there is a clinically relevant cut off. Significant variance in practice was seen in the pancreatic stump management once hypoperfusion was identified., Conclusion: The current published evidence around pancreas perfusion during pancreaticoduodenectomy is of poor quality. It does not support a causative link between hypoperfusion and POPF. Further well-designed prospective studies are required to investigate this., Competing Interests: Conflict-of-interest statement: All the authors report no relevant conflicts of interest for this article., (©The Author(s) 2023. Published by Baishideng Publishing Group Inc. All rights reserved.)

Triol acrylic-urethane (t-AU) was synthesized from an addition reaction using trimethylolpropane, hexamethylene diisocyanate, and 2-hydroxyethyl methacrylate. The novel acrylic-urethane polymer was applied to a high-performance binder to prepare a reliable road marking paint. Acrylic-urethane polymer binder formulations were designed to optimize the effect of t-AU on the physical properties. The t-AU content in the formulation affected the adhesion and optical properties. The improvement in the adhesive performance and transparency ability for road markings was attributed to the optimal chemical structure or design of the acrylic-urethane polymer. The synthesis of t-AU was confirmed by Fourier transform infrared spectroscopy, and molecular weight and polydispersity index (PDI; PDI = M w /M n ) measurements. The tensile and shear strength, hardness, gel fraction, crosslink density, contact angle, and transmittance of the acrylic-urethane polymer binder (AUP) were evaluated by curing at room temperature using a redox initiator system. An optimized AUP by adding 5 wt.% t-AU provides a viable alternative to high-performance binders in road marking paints.

Background: Acute pancreatitis (AP) has variable clinical courses. This systematic review and meta-analysis aimed to determine the safety, efficacy, and impact of epidural anaesthesia (EA) use in AP., Methods: The PubMed, EMBASE, SCOPUS and Cochrane library databases were systematically searched between 1980 and 2022 using the PRISMA guidelines, to identify observational and comparative studies reporting on EA in AP. The meta-analysis was performed in R Foundation for Statistical Computing using the meta R Package for Meta-Analysis., Results: A total of 9 studies with 2006 patients of which 726 (36%) patients had EA were included. All studies demonstrated high safety and feasibility of EA in AP with no reported major local or neurological complications. One randomised controlled trial demonstrated an improvement in pain severity using a 0-10 visual analogue scale (VAS) at the outset (1.6 in EA vs 3.5 in non-EA, P = 0.02) and on day 10 (0.2 in EA vs 2.33 in non-EA, P = 0.034). There was also improvement in pancreatic perfusion with EA measured with computerised tomography 13 (43%) in EA vs 2 (7%) in non-EA, P = 0.003. The need for ventilatory support and overall mortality was lower in EA patients 40 (19%) vs 285 (24%) P = 0.025 (OR: 0.49, 95% CI: 0.28-0.84) and 16 (7%) vs 214 (20%), P = 0.050 (OR: 0.39, 95% CI: 0.15-1.00), respectively., Conclusion: EA is infrequently used for pain management in AP and yet the available evidence suggests that it is safe and effective in reducing pain severity, improving pancreatic perfusion, and decreasing mortality., Competing Interests: Declaration of competing interests None declared., (Copyright © 2022 International Hepato-Pancreato-Biliary Association Inc. Published by Elsevier Ltd. All rights reserved.)

Background and Aims: The incidence of acute pancreatitis (AP) is increasing in the UK. Patients with severe AP require a significant amount of resources to support them during their admission. The ability to predict which patients will develop multiorgan dysfunction remains poor leading to a delay in the identification of these patients and a window of opportunity for early intervention is missed. Social deprivation has been linked with increased mortality across surgical specialties. Its role in predicting mortality in patients with AP remains unclear but would allow high-risk patients to be identified early and to focus resources on high-risk populations., Methods: A prospectively collected single-centre database was analysed. English Index of Multiple Deprivation (IMD) was calculated based on postcode. Patients were grouped according to their English IMD quintile. Outcomes measured included all-cause mortality, Intestive care unit (ITU) admission, overall length of stay (LOS) and local pancreatitis-specific complications., Results: 398 patients with AP between 2018 and 2021 were identified. There were significantly more patients with AP in Q1 (IMD 1-2) compared with Q5 (IMD 9-10) (156 vs 38, p<0.001). Patients who were resident in the most deprived areas were significantly younger (52.4 in Q1 vs 65.2 in Q5, p<0.001), and more often smokers (39.1% in Q1 vs 23.7% in Q5, p=0.044) with IHD (95.0% vs 92.1% in Q5, p< 0.001 ). In multivariate modelling, there was no significance difference in pancreatitis-related complications, number of ITU visits, number of organs supported and overall, LOS by IMD quintile., Conclusions: Although there was a significantly higher number of patients admitted to our unit with AP from the most socially deprived quintiles, there was no correlation between social economic deprivation and mortality following AP., Competing Interests: Competing interests: None declared., (© Author(s) (or their employer(s)) 2023. Re-use permitted under CC BY-NC. No commercial re-use. See rights and permissions. Published by BMJ.)

Introduction: There is a paucity of data on the incidence, risk factors, and treatment of splanchnic vein thrombosis (SVT) in acute pancreatitis (AP)., Methods: All AP admissions between 2018 and 2021 across North East of England were included. Anticoagulation was considered in the presence of superior mesenteric vein/portal vein (SMV/PV) thrombus or progressive splenic vein thrombus (SpVT). The impact of such a selective anticoagulation policy, on vein recanalisation rates and bleeding complications were explored., Results: 401 patients (median age 58) were admitted with AP. 109 patients (27.2%) developed SVT. The splenic vein in isolation was the most common site (n = 46) followed by SMV/PV (n = 36) and combined SMV/PV and SpVT (n = 27). On multivariate logistic regression alcohol aetiology (OR 2.64, 95% CI [1.43-5.01]) and >50% necrosis of the pancreas (OR 14.6, 95% CI [1.43-383.9]) increased the risk of developing SVT. The rate of recanalization with anticoagulation was higher for PVT (66.7%; 42/63) than in SpVT (2/11; p = 0.003). 5/74 of anticoagulated patients developed bleeding complications while 0/35 patients not anticoagulated had bleeding complications (p = 0.4)., Conclusion: The risk of SVT increases with AP severity and with extent of pancreatic necrosis. A selective anticoagulation policy for PVT and progressive SpVT in AP is associated with favourable outcomes with no increased risk of bleeding complications., (Copyright © 2022 International Hepato-Pancreato-Biliary Association Inc. Published by Elsevier Ltd. All rights reserved.)

Background: The aim of this study is to validate the point of normalization of braking following total hip arthroplasty (THA) and to determine the relevance of the surgical approach., Methods: Brake reaction parameters (BRPs), including brake reaction time, total brake time, and brake pedal depression force were measured in 90 patients who underwent primary arthroplasty of the right hip (42 with direct anterior approach and 48 with posterolateral approach) using a modern driving simulator. The driving parameters were measured preoperatively and every 2 weeks postoperatively until the eighth week. BRPs were measured in 40 subjects without hip problems, and the results were used as a control. Statistical assessment was performed to analyze when the patients' reaction to braking recovered to that of the control group with respect to different surgical approaches and also according to the pain., Results: Preoperative BRPs of the patients undergoing THA were prolonged compared to the control group and were normalized at the sixth week following the operation. Although BRPs of the direct anterior approach group showed significantly better improvement compared to the posterolateral approach group (total brake time at week 2, brake reaction time and brake pedal depression at week 4), both groups reached baseline value at week 6. In addition, we found no correlation between the pain score and BRPs., Conclusion: The results of the current study indicate that the response to braking events normalizes at 6 weeks following THA in young active patients and is irrelevant to the surgical approach., (Copyright © 2022 Elsevier Inc. All rights reserved.)

Knee osteoarthritis (KOA) is a common chronic debilitating disease with an estimated prevalence of 23.9% in the general adult population. The condition is characterised by joint pain, functional impairment and significant reduction in quality of life. Management for KOA can generally be divided into conservative (non-operative) and surgical (operative) measures. Conservative management broadly compromises pharmacological and non-pharmacological options and is conventionally the first line treatment to avoid or delay the need for surgical management. The aim of this study is to provide an overview of the current recommendations, efficacy and safety profile of different conservative treatments through a review of the literature., Competing Interests: Conflict-of-interest statement: The authors declare no conflict of interests., (©The Author(s) 2022. Published by Baishideng Publishing Group Inc. All rights reserved.)

In the current study, an acrylic polymer binder applicable to road signs was successfully developed by mixing various acrylic, acrylate-type, and photoinitiator-based monomer species at different acrylate series/silicone acrylate ratios. An amorphous acrylic monomer was used, and the distance between the polymers was increased to improve transparency. The binder was designed with the purpose of reducing the yellowing phenomenon due to resonance by excluding the aromatic ring structure, which is the main cause of yellowing. The optical properties of the binder were determined according to the content of n-butyl methacrylate/methyl methacrylate and the composition of the crosslinking agent in the formulation. Allyl glycidyl ether and dilauroyl peroxide were used to improve the yellowing problem of benzoyl peroxide, an aromatic photoinitiator. Adding a silicone-based trivalent acrylic monomer, 3-(trimethoxysilyl)propyl methacrylate (TMSPMA), was also found to have a significant effect on the transparency, shear properties, and water resistance of the binder. When 15 wt% TMSPMA was added, the best water repellency and mechanical properties were exhibited. The surface morphology of the improved binder and the peeling part were confirmed using field emission scanning electron microscopy. The acrylic polymer developed in this study can be applied in the coating and adhesive industries.

Polyurethane pressure-sensitive adhesives (PU-PSAs) with satisfactory tack, cohesion, and removability were newly developed through the synthetic process by reacting methylene diisocyanate, poly(ethylene glycol) (PEG), and a 1,4-butanediol chain extender based on the different HDI/HDI trimer ratios. The sticking properties of PU-PSAs depended on both the HDI/HDI trimer ratio and crosslinking-agent composition in the formulation. The molecular weight (MW) dependence of adhesion in PU-PSA was observed in the range of 1000 < Mn < 3000, suggesting that the increase in MW limits the pressure-sensitive adhesion of these samples. The differences in the crosslinking-density significantly affected the cohesion, adhesion, and tack in PU-PSA. The formulation of 50 wt.% 600PEG and 50 wt.% crosslinking-agent and an HDI/HDI trimer ratio of 1.0 led to the optimal balance between the adhesion and cohesion properties owing to the sufficient tack, high 180-peel strength, and good cohesion.

An acryl-functionalized polyurethane (PU) series was successfully synthesized using poly(tetramethylene ether) glycol-methylene diphenyl diisocyanate (PTMG-MDI) oligomer based on urethane methacrylates to control the flexibility of photo-cured 3D printing architectures. The mass ratio of acryl-urethane prepolymer: 1,4-butanediol (BD) chain-extender: diphenyl(2,4,6-trimethylbenzoyl) phosphine oxide (TPO) photoinitiator was 10:0.25:1. To produce suitably hard and precisely curved 3D architectures, the optimal UV absorbance and exposure energy of the acryl-PTMG-MDI resin were controlled precisely. Owing to the optimized viscosity of the acryl-PTMG-MDI resins, they could be printed readily by digital light processing (DLP) to form precisely curved 3D architectures after mixing with 1,6-hexanediol diacrylate (HDDA). The acryl-PTMG-MDI formulations showed much better flexural resolution than the neat resins. The printed 3D structure exhibited high surface hardness, good mechanical strength, and high elasticity for flexible applications in consumer/industrial and biomedical fields.

Photo-cured 3D architectures are successfully printed using the designed waterborne polyurethane-acrylate (WPUA) formulation. A WPUA series is synthesized in the presence of polycaprolactone diol (PCL) and 4,4'-methylene dicyclohexyl diisocyanate (H 12 MDI) as the soft segment part, dimethylolbutanoic acid (DMBA) as the emulsifier, and triethylamine (TEA) as the neutralizer, as a function of prepolymer molecular weight. The compatibility of WPUA and the photo-activating acryl monomer is as a key factor to guarantee the high resolution of 3D digital light processing (DLP) printing. The optimized blending formulations are tuned by using triacrylate monomers instead of diacrylate derivatives. For the high-accuracy and fine features of 3D DLP printing, WPUA are designed to be a suitable molecular structure for a 385 nm wavelength source, and the target viscosity is achieved in the range from 150 to 250 Cp. Photo-cured 3D architectures based on WPUA exhibit good flexural strength and high resolution.

Purpose: To validate whether the Bernard quadrant method, which was developed for application on simple lateral radiography, can be used with 3-dimensional computed tomography (3D CT) to localize the femoral insertion of the reconstructed anterior cruciate ligament (ACL)., Methods: We analyzed 32 knees with ACL tears that were reconstructed using a metal interference screw for fixation at the femoral tunnel between March 2012 and May 2013. Postoperative lateral radiographs and 3D CT images were obtained 7 days after the operation. By use of the Bernard quadrant method, the location of the femoral tunnel was measured by 2 orthopaedic surgeons by locating the position of the metal interference screw using 3D CT imaging and simple lateral knee radiography. The correlation between the femoral tunnels on the 2 radiographic images was compared using the MedCalc statistical analysis program., Results: On the 3D CT image, the position of the femoral insertion of the ACL as measured by the position of the metal screw head was 36.3% ± 6.0% in the x-coordinate and 39.6% ± 9.1% in the y-coordinate compared with 37.6% ± 5.8% and 41.0% ± 11.6%, respectively, on the simple radiograph. The Pearson correlation coefficients between 3D CT and simple radiography were 0.840 for the x-coordinate and 0.858 for the y-coordinate. Intraobserver reliability and interobserver reliability for both coordinates were greater than 0.9 on 3D CT., Conclusions: Application of the Bernard quadrant method on 3D CT showed high correlation to the originally described method using lateral radiographs and can be used reliably for localizing the reconstructed ACL., Level of Evidence: Level III, diagnostic study., (Copyright © 2016 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.)

Glycyrrhiza uralensis (Leguminosae) has long been known as an antiinflammatory agent for gastric ulcers, arthritis, and rheumatism. The flavonoid glycyrol (GC) (10 microg/ml) isolated from G. uralensis dramatically inhibits phorbol ester (phorbol 12-myristate 13-acetate)-induced nuclear factor (NF)-kappaB-dependent transcriptional activity, as determined by luciferase reporter activity in human kidney epithelial 293T cells. To investigate global gene expression profiling in cells by GC, we performed high-density oligonucleotide microarrays. Our microarray analyses showed that GC inhibited phorbol ester-induced NF-kappaB-dependent transcriptional activity in inflammatory-related gene expression. RT-PCR analysis, based on microarray data, showed that NF-kappaB-dependent genes (such as CCL2, CCL7, CD44, and HSPB8 in addition to NF-kappaB itself) were significantly downregulated by GC. Treatment with GC (10 microg/ml) inhibited I-kappaB degradation induced by phorbol 12-myristate 13-acetate. The microarray data also suggested that GC induces gene expression to p53-dependent apoptosis through endonuclease G, instead of CAD/DFF and AIF/PDCD8, as a downstream-apoptosis factor in human kidney epithelial 293T tumor cells, and induces oncogenes with a suppressor role as an added function.

gC1qBP is a 33 kDa glycoprotein that binds to the globular 'heads' of C1q. We have cloned cDNAs encoding the rat and mouse homologues of gC1qBP. Comparison of the cDNA-derived amino acid sequences of gC1qBP reveals that either of the rodent sequences is 89.9% identical to the reported human sequence. Recombinant rat gC1qBP binds avidly to human C1q. gC1qBP mRNA is abundantly expressed in every rat and mouse tissue analysed. Rat mesangial cells synthesise gC1qBP, but do not express gC1qBP on the cell surface. In rat serum, gC1qBP is present at low levels.