Search

Optimization of nonviral gene delivery typically focuses on the design of particulate carriers that are endowed with desirable membrane targeting, internalization, and endosomal escape properties. Topographical control of cell transfectability, however, remains a largely unexplored parameter. Emerging literature has highlighted the influence of cell–topography interactions on modulation of many cell phenotypes, including protein expression and cytoskeletal behaviors implicated in endocytosis. Using high-throughput screening of primary human dermal fibroblasts cultured on a combinatorial library of microscale topographies, we have demonstrated an improvement in nonviral transfection efficiency for cells cultured on dense micropit patterns compared to smooth substrates, as verified with flow cytometry. A 25% increase in GFP+ cells was observed independent of proliferation rate, accompanied by SEM and confocal microscopy characterization to help explain the phenomenon qualitatively. This finding encourages researchers to investigate substrate topography as a new design consideration for the optimization of nonviral transfection systems.

In order to identify the cellular mechanisms leading to the biocompatibility of hydroxyapatite implants, we studied the interaction of human bone marrow derived stromal (mesenchymal) stem cells (hMSCs) with fibronectin-coated gold (Au) and hydroxyapatite (HA) surfaces. The adsorption of fibronectin was monitored by Quartz Crystal Microbalance with Dissipation (QCM-D) at two different concentrations, 20 μg/ml and 200 μg/ml, and the fibronectin adsorption experiments were complemented with antibody measurements. The QCM-D results show that the surface mass uptake is largest on the Au surfaces, while the number of polyclonal and monoclonal antibodies directed against the cell-binding domain (CB-domain) on the fibronectin (Fn) is significantly larger on the (HA) surfaces. Moreover, a higher number of antibodies bound to the fibronectin coatings formed from the highest bulk fibronection concentration. In subsequent cell studies with hMSC's we studied the cell spreading, cytoskeletal organization and cell morphology on the respective surfaces. When the cells were adsorbed on the uncoated substrates, a diffuse cell actin cytoskeleton was revealed, and the cells had a highly elongated shape. On the fibronectin coated surfaces the cells adapted to a more polygonal shape with a well-defined actin cytoskeleton, while a larger cell area and roundness values were observed for cells cultured on the coated surfaces. Among the coated surfaces a slightly larger cell area and roundness values was observed on HA as compared to Au. Moreover, the results revealed that the morphology of cells cultured on fibronectin coated HA surfaces were less irregular. In summary we find that fibronectin adsorbs in a more activated state on the HA surfaces, resulting in a slightly different cellular response as compared to the fibronectin coated Au surfaces.

Surface modification of topography and chemistry in order to achieve a specific water contact angle (CA) has been explored by using a novel combinatorial screening platform. The screening arrays consisted of 507 distinct combinations of micro-topographies and chemical compositions. By performing chemical modifications with 1H, 1H, 2H, 2H perfluoroethyltriethoxy-silane (PFS) and n-octadecyltriethoxysilane (ODS) on standard silicon wafers it was possible to include both superhydrophobic and very hydrophilic pad arrays in the same screening platform. Surfaces modified with PFS were more hydrophobic than surfaces modified with ODS, while the unmodified silicon surfaces were hydrophilic. For the PFS modified surfaces the largest CAs were achieved with a small pillar size of X = 1 µm and an intermediate inter-pillar gap size of Y = 4 µm with superhydrophobic CAs over 170°. Surface analysis with X-ray photoelectron spectroscopy (XPS) revealed that CF3 groups were present at the surface, contributing to the superhydrophobic effect. The ODS modified surfaces had intermediate wettabilities with CAs between 100 and 150°, which were dependent on the pillar size, the inter-pillar gap size, and the specific pillar pattern. The unmodified silicon topographical surfaces were very hydrophilic with CAs below 20° independent of specific topography. With this approach we have managed to fabricate 507 distinct surface areas covering a range of wettabilities, which is useful when screening these effects in several different applications. The measured CAs did not follow the simple Wenzel model. Furthermore, the adaptation of the Cassie model introduces Φs, the fraction of solid surface in contact with the liquid, which is difficult to estimate, thereby emphasizing the need for an experimental determination. Surface modification of topography and chemistry in order to achieve a specific water contact angle (CA) has been explored by using a novel combinatorial screening platform. The screening arrays consisted of 507 distinct combinations of micro-topographies and chemical compositions. By performing chemical modifications with 1H, 1H, 2H, 2H perfluoroethyltriethoxy-silane (PFS) and n-octadecyltriethoxysilane (ODS) on standard silicon wafers it was possible to include both superhydrophobic and very hydrophilic pad arrays in the same screening platform. Surfaces modified with PFS were more hydrophobic than surfaces modified with ODS, while the unmodified silicon surfaces were hydrophilic. For the PFS modified surfaces the largest CAs were achieved with a small pillar size of X = 1 µm and an intermediate inter-pillar gap size of Y = 4 µm with superhydrophobic CAs over 170°. Surface analysis with X-ray photoelectron spectroscopy (XPS) revealed that CF3 groups were present at the surface, contributing to the superhydrophobic effect. The ODS modified surfaces had intermediate wettabilities with CAs between 100 and 150°, which were dependent on the pillar size, the inter-pillar gap size, and the specific pillar pattern. The unmodified silicon topographical surfaces were very hydrophilic with CAs below 20° independent of specific topography. With this approach we have managed to fabricate 507 distinct surface areas covering a range of wettabilities, which is useful when screening these effects in several different applications. The measured CAs did not follow the simple Wenzel model. Furthermore, the adaptation of the Cassie model introduces Φs, the fraction of solid surface in contact with the liquid, which is difficult to estimate, thereby emphasizing the need for an experimental determination

Biomaterial surfaces structured with topographical features have been predicted to play an important role in the next generation of biomedical implants. Specific trends with regard to the influence of the topographical effect on cellular behavior are however challenging to establish due to differences in the topographical features and geometries in the various studies. Here, we demonstrate the use of a highly versatile combinatorial screening approach to identify the effect of 169 distinct surface topographies, consisting of pillars, on fibroblast proliferation and mechanical response. Altering the inter-pillar gap size of the structures revealed a significant change in fibroblast proliferation and identified obvious stress-induced changes in the cytoskeleton and focal adhesion morphology. Larger (4–6 μm) inter-pillar gap sizes reduced fibroblast proliferation and elicited a strong elongation leading to a disruption of the actin cytoskeleton anchored primarily to focal adhesions located between the pillars. Smaller (1–2 μm) inter-pillar gap sizes, on the contrary, caused the fibroblasts to proliferate comparable to cells on a non-structured surface with cells having a clear actin cytoskeleton attached to focal adhesions located mostly on top of the pillars. The approach reveals a strong correlation between the exact topographical periodicities and cellular responses such as cell proliferation, cell morphology and focal adhesion.

We report a facile method of generating ultradense poly(l-lysine)-graft- poly(ethylene glycol) (PLL-g-PEG) surface by using high temperature alone, which in turn provides dramatic improvement in resisting nonspecific bioadsorption. X-ray photoelectron spectroscopy (XPS) revealed that the surface graft density increased ∼4 times higher on the surface prepared at 80 °C compared to 20 °C. The studies from small-angle X-ray scattering (SAXS) and the effect of varying ionic strength during/post assemblies at 20 and 80 °C indicated that the "cloud point grafting effect" is not the cause for obtaining high density grafting. Stringent long-term bioresistance tests have been conducted and the temperature-induced PLL-g-PEG surfaces have achieved (1) zero mammalian cell adsorption/migration for up to 36 days and (2) extremely close-to-zero protein adsorptions have been observed even after 36 days in 10% serum media and 24 h in whole blood within the ultrasensitive detection limit of time-of-flight secondary ion mass spectrometry (ToF-SIMS).

Stem cells possess unique abilities as they can renew themselves for extended periods of time and have the capacity to differentiate into a variety of lineages. They hold promise for treating a plethora of diseases ranging from musculoskeletal defects to myocardial infarction and to neural disorders. Understanding how to control the fate decision of these cells to self-renew or differentiate is paramount in stem cell tissue engineering. Recently, significant progress has been made in guiding stem cell differentiation in vitro, and we are beginning to understand the complex interplay of factors that control their fate. Here, we highlight the recent approaches for guidance of stem cells through patterning of surfaces at the micro- and nanoscale. Particular attention is given to chemical patterning of substrates with adhesion ligands and physical patterning with a variety of topographical features. These surface-mediated biochemical and mechanical cues have proven influential in altering a wide range of stem cell phenotypes. This approach to guide or ultimately control stem cells by surface patterning has enormous potential implications in cell therapies and regenerative medicine.

As our population ages, there is a greater need for a suitable supply of engineered tissues to address a range of debilitating ailments. Stem cell based therapies are envisioned to meet this emerging need. Despite significant progress in controlling stem cell differentiation, it is still difficult to engineer human tissue constructs for transplantation. Recent advances in micro- and nanofabrication techniques have enabled the design of more biomimetic biomaterials that may be used to direct the fate of stem cells. These biomaterials could have a significant impact on the next generation of stem cell based therapies. Here, we highlight the recent progress made by micro- and nanoengineering techniques in the biomaterials field in the context of directing stem cell differentiation. Particular attention is given to the effect of surface topography, chemistry, mechanics and micro- and nanopatterns on the differentiation of embryonic, mesenchymal and neural stem cells. Keywords: micro- and nanotopography; microwells; microarrays; embryonic and adult stem cells; stem cell therapy, National Institutes of Health (U.S.) (Grant HL092836), National Institutes of Health (U.S.) (Grant DE019024), National Institutes of Health (U.S.) (Grant EB008392), National Institutes of Health (U.S.) (Grant DE021468), National Institutes of Health (U.S.) (Grant AR05837), National Institutes of Health (U.S.) (Grant EB012597), National Institutes of Health (U.S.) (Grant HL099073), National Science Foundation (U.S.) (Award DMR 0847287)

Udgivelsesdato: 2008-Oct Traumatic brain injury results in loss of neurons caused as much by the resulting neuroinflammation as by the injury. Gold salts are known to be immunosuppressive, but their use are limited by nephrotoxicity. However, as we have proven that implants of pure metallic gold release gold ions which do not spread in the body, but are taken up by cells near the implant, we hypothesize that metallic gold could reduce local neuroinflammation in a safe way. Bio-liberation, or dissolucytosis, of gold ions from metallic gold surfaces requires the presence of disolycytes i.e. macrophages and the process is limited by their number and activity. We injected 20-45 mum gold particles into the neocortex of mice before generating a cryo-injury. Comparing gold-treated and untreated cryolesions, the release of gold reduced microgliosis and neuronal apoptosis accompanied by a transient astrogliosis and an increased neural stem cell response. We conclude that bio-liberated gold ions possess pronounced anti-inflammatory and neuron-protective capacities in the brain and suggest that metallic gold has clinical potentials. Intra-cerebral application of metallic gold as a pharmaceutical source of gold ions represents a completely new medical concept that bypasses the blood-brain-barrier and allows direct drug delivery to inflamed brain tissue.