Search

Abstract: Tolnaftate, an antifungal of thiocarbamate class, is used topically in 1% formulations. Its penetration into skin layers is a prerequisite for tolnaftate action against dermatophytes. The aim of this work was to optimize and validate a simple, rapid, accurate and reproducible procedure for tolnaftate assay in human skin samples and to apply this procedure for in vitro tolnaftate penetration studies. High performance liquid chromatography (HPLC) method with UV detection was used to validate tolnaftate assay for linearity, specificity, accuracy, precision, limit of quantitation, limit of detection, drug extraction recovery and stability in skin extracts. In vitro tolnaftate penetration studies were carried out using flow-through diffusion cells, mounted with human skin. Epidermis and dermis, separated by heat-separation method, were extracted using ultrasonication in methanol. Linear range of the analytical procedure was within 0.6-100 pg/mL. The assay was specific, accurate (within-day and between-day recovery values were 98.2-104.2% and 98.7-101.4%, respectively) and precise (within-day and between-day imprecision was = 3.8%). Mean extraction recoveries of tolnaftate from epidermis and dermis were satisfactory and reaching 90%. In vitro skin penetration studies revealed that after application of 1% (w/w) tolnaftate solution in polyethylene glycol 400 for 24 hours, the mean amount of tolnaftate penetrating into the epidermis and dermis was 2.60 +/- 0.28 microg/cm2 and 0.92 +/- 0.12 microg/cm2, respectively. A validated reliable HPLC method could be recommended for biopharmaceutical evaluation of tolnaftate preparations and studies of pharmacokinetics in human skin after in vitro penetration studies.

Pioneering research work on continuous or monolithic beds for LC was published in 1989. However, till date there is a lack of complex investigation of various factors affecting the morphology of the beds polymerized from water-soluble co-monomers. In this article the effect of buffer, used as polymerization medium, concentration and pH, and total monomer concentration on the morphology of the resultant continuous beds are discussed. Evaluation of the continuous beds was performed by means of capillary LC, CEC, and inverse size-exclusion chromatography.

Purpose: Humulus lupulus (H. lupulus), more commonly known as hop, is a member of the Cannabaceae family with male and female flowers on separate plants. It is native in Europe including Lithuania, Asia and North America. Hop has been recognized as a medicinal plant for centuries, nevertheless different medicinal activities of hop are currently investigated and discovered. An important class of hop compounds is the hop acids, which are classified as alpha-acids and beta-acids. Different varieties of hops vary in amount and composition of hop acids., Methods: Simple capillary zone electrophoresis method has been optimized and applied for the analysis of hop acids in hop cone extracts., Results: With this method the analysis takes ca. 10 min. Repeatability for migration times and peak areas expressed as relative standard deviation were up to 0.21% and 5.96%, respectively., Conclusions: Comparative results of capillary zone electrophoretic analysis of extracts of different hop varieties and conductometric titration, as a standard method for determination of alpha-acids, are presented. Both methods provide consistent results, however capillary zone electrophoresis is capable of separating co- form of humulones from other forms.

In analytical sciences the design of novel materials and stationary phases for the sample preparation and separation of analytes from biological fluids is needed. In this work we present different strategies for modification of stationary phases to produce tailored solutions for the analytical problem. In this context a novel shielded polymeric reversed-phase monolithic material was prepared in the presence of different numbers of reactive groups and concentrations of the coating polymer. Chromatographic experiments were performed using benzoic acid propyl ester in order to characterize the hydrophobicity and efficiency of the different restricted-access continuous beds prepared. Inverse size-exclusion chromatography was used for investigation of the pore structure properties of the beds. Capillary columns were applied for nanochromatography of biological fluids containing a mixture of nitrazepamum and medazepamum.

A synthetic route to acrylamide-based monolithic stationary phases for CEC with rotaxane-type immobilized derivatized beta-CD was explored. N,N'-Ethylenedianilinediacrylamide was synthesized as the water-insoluble crosslinker forming water-soluble inclusion complexes with statistically methylated beta-CD. Mixed-mode stationary phases were synthesized by free radical copolymerization of the bisacrylamide-CD host-guest complex with water-soluble monomers and an additional water-soluble crosslinker in aqueous solution. Complex formation in solution and inclusion of the pseudorotaxane into the polymeric network (formation of a polyrotaxane architecture) were studied by means of (1)H-NMR chemical shift analysis, CD modified micellar EKC (CD-MEKC), 2D-NOESY spectroscopy, and solid state( 13)C-NMR spectroscopy. The presence of a mixed-mode selectivity of the stationary phase based on hydrophobic and hydrophilic interaction was confirmed by CEC with neutral polar and nonpolar solutes.

Hyperlink robust biocompatible solid-phase microextraction (SPME) devices were prepared using continuous bed (monolithic) restricted-access media (RAM) as the SPME capillary insert. The RAM-based SPME approach was able to simultaneously separate proteins from a biological sample, while directly extracting the active components of caffeine, paracetamol and acetylsalicylic acid from the drug NeoCitramonum. The devices were interfaced with a CZE system and fully automated analysis for sample preconcentration, desorption, separation and quantification of analytes was evaluated. Comparative study of in-line coupled SPME-CZE using RAM and RP capillary inserts was carried out. Using an SPME (RAM) insert, the calculated caffeine, paracetamol and acetylsalicylic acid LODs in a bovine plasma sample were 0.3, 0.8 and 1.9 ng/mL, respectively.

In this work, monolithic silica columns with the C4, C8, and C18 chemistry and having various macropore diameters and two different mesopore diameters are studied to access the differences in the column efficiency under isocratic elution conditions and the resolution of selected peptide pairs under reversed-phase gradient elution conditions for the separation of peptides and proteins. The columns with the pore structural characteristics that provided the most efficient separations are then employed to optimize the conditions of a gradient separation of a model mixture of peptides and proteins based on surface chemistry, gradient time, volumetric flow rate, and acetonitrile concentration. Both the mesopore and macropore diameters of the monolithic column are decisive for the column efficiency. As the diameter of the through-pores decreases, the column efficiency increases. The large set of mesopores studied with a nominal diameter of approximately 25 nm provided the most efficient column performance. The efficiency of the monolithic silica columns increase with decreasing n-alkyl chain length in the sequence of C18

A simple method for the preparation of an affinity monolithic (also called continuous bed) capillary column for alpha-mannose-specific lectins is described. 2-Hydroxyethyl methacrylate in combination with (+)-N,N -diallyltartardiamide (DATD) and piperazine diacrylamide (PDA, 1,4-bisacryloyl-piperazine) as crosslinkers, were used as monomers for the monolith. After oxidation of DATD with periodate, alpha-mannose with spacer was bound to the aldehyde groups of the polymeric skeleton via reductive amination to form an affinity column for the separation, enrichment or binding studies of mannose-specific lectins. The permeability of the column was excellent. The porosity of the monolith was investigated by scanning electron microscope (SEM) and inverse size exclusion chromatography (ISEC). The affinity of the monolith was evaluated by frontal analysis (FA) and fluorescence microscopy (FM) using fluorescently labeled concanavalin (Con A). Frontal affinity chromatography showed a specific interaction of two different lectins with the alpha-mannose-modified monolith. According to FM the affinity sites were evenly distributed over the monolithic bed.

There is a demand of novel high resolution separation media for separation of complex mixtures, particularly biological samples. One of the most flexible techniques for development of new separation media currently is synthesis of the continuous bed (monolithic) stationary phases. In this study the capillary format gradient stationary phases were formed using continuous bed (monolith) polymerization in situ. Different reversed-phase stationary phase gradients were tailored and their resolution using capillary liquid chromatography and capillary electrochromatography at isocratic mobile phase conditions was evaluated. It is demonstrated, that efficiency and resolution of the gradient stationary phases can be substantially increased comparing to the common (isotropic) stationary phases. The proposed formation approach of the gradient stationary phase is reproducible and compatible with the capillary format or microchip format separations. It can be easily automated for the separation optimizations or mass production of the capillary columns or chips.

One and a half decade passed since the pioneering work on synthesis and application of non-particulate monolithic stationary phases for liquid chromatography was published by S. Hjertén et al. [S. Hjertén, J.L. Liao, R. Zhang, J. Chromatogr. 473 (1989) 273]. This technique attracted much interest and effort of the researchers developing chromatographic methods and designing chromatographic stationary phases due to several generic qualities of the monolithic (continuous bed) technique. Advantages include: flexibility of the technique in sense of chemistries and functional compositions of the resultant stationary phases; low separation impedance (ratio of pressure drop and efficiency) of monolithic columns; compatibility with micro and nanoformat separations; low time and labour consumption and cost-efficiency. Not surprisingly, these materials attracted interest from phytochemists as plants constitute a complex matrix. However to date, not many successful studies were published in the area of monolithic materials for solving plant metabolomics problems or substituting common particulate materials with monolithic stationary phases in phytochemical analysis. This paper provides an overview.

A simplified approach to synthesize nonparticulate (continuous or monolithic) beds with embedded vancomycin chiral selectors for capillary electrochromatography is proposed. In the present approach, N,N'-diallyltartardiamide monomer with diol functionality is used, which can be readily converted to aldehyde groups via periodate treatment. Parallel to the activation of the polymeric matrix for covalent attachment of vancomycin, the periodate treatment has shown secondary effects on the polymeric bed morphology, namely the increase of the average pore size and porosity of the skeleton. Inversed size-exclusion chromatography was applied to characterize porosimetric properties of the capillary columns before and after the periodate treatment. Electroosmotic and enantioselective properties of the nonparticulate beds synthesized are presented. The approach is of more general interest attaching different affinity groups to the polymeric matrix and/or enhancing the accessibility to the active sites, for instance, in the molecular imprinting technique.

A method for the derivatization of agarose by covalent attachment of hydrophobic ligands for reversed-phase (RP) chromatographic separation and ionic groups for generation of electroosmosis under electrochromatographic conditions in the capillaries or microfluidic channels filled with the thermogel of this agarose derivative is described. The product renders a capability of reversible thermogelation. The thermogels formed provide sufficient hydrophobicity and electroosmosis for the separations of the analytes under RP mobile-phase conditions and electric field applied. The gels may be used repeatedly without loss of resolution. They are thermally replaceable and UV transparent (providing possibility in column/in-gel detection), require no covalent attachment to the capillary inner wall (or microchip channel), and are suitable for isocratic or gradient operation in the aqueous-organic mobile phases.

The pioneering research work published by Hjertén et al. [J. Chromatogr. 473 (1989) 273] in 1989 dealing with development and application of the continuous bed (monolithic) technique as an attractive alternative for the classical packed columns in chromatography, stimulated further investigations in this direction. The research data published since that time on the development and application of the continuous beds formed using hydrophobic interaction-based phase separation mechanism are reviewed. Some innovative species of the beds, such as polyrotaxane beds or nonparticulate restricted-access materials for direct analysis of the biological fluids in the capillary format are also discussed. Characteristic features and practical details of the continuous bed technique are revealed. Due to many advantages, the continuous bed technique became a competitor with the traditional packings in capillary or chip-based microanalysis. The importance of the continuous bed morphology on the chromatographic characteristics is shown. The applicability of modern microscopic analysis to evaluate the morphology of the continuous beds is demonstrated.

Restricted-access reversed-phase non-particulate (continuous bed or monolithic) stationary phases of different hydrophobicity synthesized in 100 microm i.d. fused silica capillaries have been evaluated. A specific property of restricted-access media (RAM) is that they interact with small analytes and exclude big molecules, e.g. proteins, from access to the active sites and adsorption on the surface. This dual property facilitates direct injection of biological fluids for drug or drug-metabolite analysis. Different RAM and RAM-precursor capillary columns were tested to assess the influence of chromatographic bed morphology on loadability. Inverse size-exclusion chromatography was used for investigation of pore structural properties of the capillary-format continuous beds. The data obtained were used to discuss the mechanism of separation of the biological samples using capillary columns and to propose a model for the topochemical architecture of the RAM investigated. Different morphology of the non-particulate reversed-phase precursors resulted in two types of RAM material shielded with hydrophilic polymer, classified as homogeneous or heterogeneous topochemistry stationary phases. Capillary columns were applied for chromatography of biological fluids. High resolution was obtained, without the need for column switching, when capillary columns operated in gradient conditions. Extensive evaluation of the chromatographic properties (hydrophobicity, efficiency, separation impedance, and loadability) of the non-particulate reversed-phase materials was performed before and after shielding with hydrophilic polymer to generate restricted-access properties. Minor changes of hydrophobicity, efficiency, or separation impedance were observed after the shielding.

Enantiomeric separations in capillary electrochromatography (CEC) carried out using a continuous-bed chiral stationary phase (CSP) based on the macrocyclic antibiotic, vancomycin, is presented. The continuous beds were prepared from methacryloxypropyl modified fused silica capillaries (100 microm ID) by in situ copolymerization of N-(hydroxymethyl)acrylamide and piperazine diacrylamide with vinyl sulfonic acid comonomer used to introduce ionic functionality and thus a strong electroosmotic flow (EOF). The CSP was subsequently prepared by immobilizing the vancomycin stationary phase by reductive amination. Preliminary results have indicated that an extremely strong EOF is obtained in both the nonaqueous polar organic (15.2 x 10(-5) cm2 V(-1) s(-1) and the aqueous reversed-phase modes of operation (8.5 x 10(-5) cm2 V(-1) s(-1)). Enantioselectivity was obtained for four racemic compounds, the best of which was in the case of thalidomide which was separated in 10 minutes with high resolution (Rs = 2.5) and efficiency (120,000 plates meter(-1)) values.