Search

Modern human societies are highly dependent on plastic materials, however, the bulk of them are non-renewable commodity plastics that cause pollution problems and consume large amounts of energy for their thermal processing activities. In this article, a sustainable cellulose hydroplastic material and its composites, that can be shaped repeatedly into various 2D/3D geometries using just water are introduced. In the wet state, their high flexibility and ductility make it conducive for the shaping to take place. In the ambient environment, the wet hydroplastic transits spontaneously into rigid materials with its intended shape in a short time of <30 min despite a thickness of hundreds of microns. They also possess humidity resistance and are structurally stable in highly humid environments. Given their excellent mechanical properties, geometry reprogrammability, bio-based, and biodegradable nature, cellulose hydroplastic poses as a sustainable alternative to traditional plastic materials and even "green" thermoplastics. This article also demonstrates the possibility of 3D-printing these hydroplastics and the potential of employing them in electronics applications. The demonstrated hydroshapable structural electronic components show capability in performing electronic functions, load-bearing ability and geometry versatility, which are attractive features for lightweight, customizable and geometry-unique electronic devices., (© 2024 The Authors. Advanced Science published by Wiley‐VCH GmbH.)

The synthesis of PVA hydrogels (PVA-Hy) requires a highly basic environment ( e.g. , an aqueous solution of sodium hydroxide, NaOH, 14% w/w, 4.2 M), but the rapid crosslinking of PVA due to high pH makes it challenging to perform layer-by-layer three-dimensional (3D) printing of PVA-Hy. This work demonstrated 3D printing of PVA-Hy in moderate alkaline conditions ( e.g. , NaOH, 1% w/w, 0.3 M) assisted by aqueous two-phase system (ATPS). Salting out of PVA to form ATPS allowed temporal shape retention of a 3D-printed PVA structure while it was physically crosslinked in moderate alkaline conditions. Crucially, the layer-to-layer adhesion of PVA was facilitated by delayed crosslinking of PVA that required additional reaction time and overlapping between the layers. To verify this principle, we studied the feasibility of direct ink write (DIW) 3D printing of PVA inks (5-25% w/w, μ = 0.1-20 Pa s, and MW = 22 000 and 74 800) in aqueous embedding media offering three distinct chemical environments: (1) salts for salting out ( e.g. , Na 2 SO 4 ), (2) alkali hydroxides for physical crosslinking ( e.g. , NaOH), and (3) a mixture of salt and alkali hydroxide. Our study suggested the feasibility of 3D-printed PVA-Hy using the mixture of salt and alkali hydroxide, demonstrating a unique concept of embedded 3D printing enabled by ATPS for temporary stabilization of the printed structures to facilitate 3D fabrication.

The presence of toxic organic pollutants in aquatic environments poses significant threats to human health and global ecosystems. Photocatalysis that enables in situ production and activation of H 2 O 2 presents a promising approach for pollutant removal; however, the processes of H 2 O 2 production and activation potentially compete for active sites and charge carriers on the photocatalyst surface, leading to limited catalytic performance. Herein, a hierarchical 2D/2D heterojunction nanosphere composed of ultrathin BiOBr and BiOI nanosheets (BiOBr/BiOI) is developed by a one-pot microwave-assisted synthesis to achieve in situ H 2 O 2 production and activation for efficient photocatalytic wastewater treatment. Various experimental and characterization results reveal that the BiOBr/BiOI heterojunction facilitates efficient electron transfer from BiOBr to BiOI, enabling the one-step two-electron O 2 reduction for H 2 O 2 production. Moreover, the ultrathin BiOI provides abundant active sites for H 2 O 2 adsorption, promoting in situ H 2 O 2 activation for •O 2 - generation. As a result, the BiOBr/BiOI hybrid exhibits excellent activity for pollutant degradation with an apparent rate constant of 0.141 min -1 , which is 3.8 and 47.3 times that of pristine BiOBr and BiOI, respectively. This work expands the range of the materials suitable for in situ H 2 O 2 production and activation, paving the way toward sustainable environmental remediation using solar energy., (© 2023 Wiley-VCH GmbH.)

Here, the complete genome of Paramuribaculum intestinale type strain DSM 100749 T (=JCM 33114 T ) is presented. P. intestinale is a recently described species of Muribaculaceae and was isolated from the gut of C57BL/6 laboratory mice. The genome can serve as an important resource for comparative genomics approaches., Competing Interests: The authors declare no conflict of interest.

Droplets adhere to surfaces due to their surface tension γ and understanding the vertical force F d required to detach the droplet is key to many technologies ( e.g. , inkjet printing, optimal paint formulations). Here, we predicted F d on different surfaces by numerically solving the Young-Laplace equation. Our numerical results are consistent with previously reported results for a wide range of experimental conditions: droplets subjected to surface vs. body forces with | F d | ranging from nano- to milli-newtons, droplet radii R ranging from tens of microns to several millimetres, and for various surfaces (micro-/nano-structured superhydrophobic vs. lubricated surfaces). Finally, we derive an analytic solution for F d on highly hydrophobic surfaces and further show that for receding contact angle θ r > 140°, the normalized F d /π R is equivalent to the Young-Dupre work of adhesion γ (1 + cos  θ r ).

Interim analysis of the National Skin Centre Singapore Psoriasis Biologics Registry (SINGPSOR) from August 2017 to May 2021, in which 58 patients were analysed, showing that those receiving biologic treatment had significantly more severe psoriasis based on PASI (Psoriasis Area and Severity Index), BSA (body surface area) and PGA (Physician Global Assessment) measures at baseline, demonstrated a statistically non-significant trend towards greater improvement with treatment, and had a lower percentage of adverse events compared to those receiving conventional systemic therapy. Future analyses of SINGPSOR, with larger sample size and longer follow-up, will be invaluable to further characterize these patients and their treatment outcomes., (© 2023 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Anaerostipes hadrus strains BA1 and GIF7 were isolated from a healthy man. The complete genomes' sizes are 2,946,270 bp (BA1) and 2,907,308 bp (GIF7), with high average nucleotide identity (ANIb = 100%) and alignments ≥96.86% between strains. Conversely, both strains share 97.47% (ANIb) identity and ≤77.36% alignments to A. hadrus ATCC 29173 T ., Competing Interests: The authors declare no conflict of interest.

The incidence and prevalence of recalcitrant cutaneous fungal infections is on the rise. Terbinafine-resistant Trichophyton has not only been widespread in India, but has also been reported in countries spread throughout the globe. Strains of yeasts such as Malassezia and Candida, which exist both as commensals and as pathogens to the human skin, have also been found to develop resistance to antifungals. Non-dermatophyte moulds which can colonize and infect damaged nails are especially difficult to treat, not only due to resistance, but also because of poor drug penetration of hard keratin. Psychosocial factors such as the indiscriminate broad-spectrum antifungal use in agriculture and in medicine, and poor adherence to hygienic measures to break the chain of infection contribute to the development of antifungal resistance. Such environments encourage fungi to develop various resistance mechanisms to withstand antifungal treatment. These include: (a) alteration of the drug target, (b) increasing efflux of drug/metabolites, (c) inactivation of drug, (d) bypass mechanisms or substitution of the pathway affected by the drug, (e) stress adaptation mechanisms and (f) biofilm formation. Understanding of such mechanisms and how they arise are crucial for development of new ways to prevent or overcome resistance. Novel antifungal treatments have recently been approved in the United States of America for treatment of vulvovaginal candidiasis. Ibrexafungerp (enfumafungin derivative) and oteseconazole (tetrazole) differ from their respective related drug classes of echinocandins and triazoles by having different structures, which lend these medicines advantage compared to traditional treatment by having a different binding site and more selectivity for fungi respectively. Other drugs designed to circumvent the known mechanisms of antifungal resistance are also at various phases of development. Concurrent measures at an institutional and individual level to address and limit inappropriate antifungal use to reduce development of antifungal resistance should be undertaken in a concerted effort to address this epidemic., (© 2023 The Australasian College of Dermatologists.)

Hypothesis: Underwater oil-repellency of polyelectrolyte brushes has been attributed mainly to electric double-layer repulsion forces based on Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. Many non-polyelectrolyte materials also exhibit oil-repellent behaviour, but it is not clear if there exist similar electric double-layer repulsion and if it is the sole mechanism governing their underwater oil-repellency., Experiments/simulations: In this article, the oil-repellency of highly amorphous cellulose exhibiting is investigated in detail, through experiments and molecular dynamics simulations (MDS)., Findings: It was found that the stable surface hydration on regenerated cellulose was due to a combination of long-range electrostatic repulsions (DLVO theory) and short-range interfacial hydrogen bonding between cellulose and water molecules (as revealed by MDS). The presence of a stable water layer of about 200 nm thick (similar to that of polyelectrolyte brushes) was confirmed. Such stable surface hydration effectively separates cellulose surface from oil droplets, resulting in extremely low adhesion between them. As a demonstration of its practicality, regenerated cellulose membranes were fabricated via electrospinning, and they exhibit high oil/water separation efficiencies (including oil-in-water emulsions) as well as self-cleaning ability., Competing Interests: Declaration of Competing Interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Chaobin He reports financial support was provided by SCG Chemicals Co Ltd., (Copyright © 2022 Elsevier Inc. All rights reserved.)

A water droplet can bounce off superhydrophobic surfaces multiple times before coming to a stop. The energy loss for such droplet rebounds can be quantified by the ratio of the rebound speed U R and the initial impact speed U I ; i.e., its restitution coefficient e = U R / U I . Despite much work in this area, a mechanistic explanation for the energy loss for rebounding droplets is still lacking. Here, we measured e for submillimeter- and millimeter-sized droplets impacting two different superhydrophobic surfaces over a wide range of U I (4-700 cm s -1 ). We proposed simple scaling laws to explain the observed nonmonotonic dependence of e on U I . In the limit of low U I , energy loss is dominated by contact-line pinning and e is sensitive to the surface wetting properties, in particular to contact angle hysteresis Δ cos θ of the surface. In contrast, e is dominated by inertial-capillary effects and does not depend on Δ cos θ in the limit of high U I .

Monkeypox is a global health emergency. Prior to 2022, there were few reports of monkeypox outside of endemic countries, which were mostly travel-related. Since May 2022, an exponential increase in monkeypox infections in previously non-endemic countries has been reported. Unlike previous outbreaks of monkeypox, which were zoonotically transmitted and presented with generalised vesicular eruptions after prodromal symptoms, cases of the current outbreak feature significant travel and sexual history, and atypical localised genital eruptions with unpredictable onset relative to viral prodrome-like symptoms. We summarise the 15 Singapore cases reported to date as of August 2022, and highlight salient clinical clues that may aid physicians in narrowing the broad differential diagnosis of an acute vesicular genital eruption. Although research into vaccination and antiviral strategies is ongoing, monkeypox is currently conservatively managed. Clinical vigilance and a high index of suspicion are required to facilitate early detection and isolation of cases to contain transmission in Singapore.

Competing Interests: The authors declare no conflicts of interest.

Competing Interests: The authors declare no conflicts of interest.

Purpose: Precision oncology, such as next generation sequencing (NGS) molecular analysis and bioinformatics are used to guide targeted therapies. The laboratory turnaround time (TAT) is a key performance indicator of laboratory performance. This study aims to formally apply statistical process control (SPC) methods such as CUSUM and EWMA to a precision medicine programme to analyze the learning curves of NGS and bioinformatics processes., Patients and Methods: Trends in NGS and bioinformatics TAT were analyzed using simple regression models with TAT as the dependent variable and chronologically-ordered case number as the independent variable. The M-estimator "robust" regression and negative binomial regression were chosen to serve as sensitivity analyses to each other. Next, two popular statistical process control (SPC) approaches which are CUSUM and EWMA were utilized and the CUSUM log-likelihood ratio (LLR) charts were also generated. All statistical analyses were done in Stata version 16.0 (StataCorp), and nominal P < 0.05 was considered to be statistically significant., Results: A total of 365 patients underwent successful molecular profiling. Both the robust linear model and negative binomial model showed statistically significant reductions in TAT with accumulating experience. The EWMA and CUSUM charts of overall TAT largely corresponded except that the EWMA chart consistently decreased while the CUSUM analyses indicated improvement only after a nadir at the 82 nd case. CUSUM analysis found that the bioinformatics team took a lower number of cases (54 cases) to overcome the learning curve compared to the NGS team (85 cases)., Conclusion: As NGS and bioinformatics lead precision oncology into the forefront of cancer management, characterizing the TAT of NGS and bioinformatics processes improves the timeliness of data output by potentially spotlighting problems early for rectification, thereby improving care delivery., Competing Interests: DT consults on the advisory board for Astra Zeneca and has received research funding from Karyopharm Therapeutics. The remaining authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2021 Jain, Sim, Ng, Chin, Lim, Syn, Kamal, Gupta, Heong, Lee, Sapari, Koh, Isa, Ho, O’Hara, Ulagapan, Gu, Shroff, Weng, Lim, Lim, Pang, Ng, Wong, Soo, Yong, Chee, Lee, Goh, Soong and Tan.)

The functional properties of a surface, such as its anti-fogging or anti-fouling performance, are influenced by its wettability. To quantify surface wettability, the most common approach is to measure the contact angles of a liquid droplet on the surface. While well established and relatively easy to perform, contact angle measurements were developed to describe macroscopic wetting properties and are difficult to perform for submillimetric droplets. Moreover, they cannot spatially resolve surface heterogeneities that can contribute to surface fouling. To address these shortcomings, we report on using an atomic force microscopy technique to quantitatively measure the interaction forces between a microdroplet and a surface with piconewton force resolution. We show how our technique can be used to spatially map topographical and chemical heterogeneities with micron resolution.

Purpose of Review: We review the range of dermatological signs seen in Zika infection and the possible relationship between the rash and viremia. We also hoped to explore the utility of mucocutaneous manifestations in narrowing the differential diagnosis from other similar flaviviruses., Recent Findings: Clinical manifestations of Zika infection share many similarities with other mosquito-borne viruses such as dengue. These include non-specific symptoms such as a fever, rash, arthralgia, myalgia, and conjunctivitis. The morphology of the rash in Zika infection is not very specific and commonly described as maculopapular and centrifugal that usually extends to become diffuse. We reviewed 123 publications, encompassing a total of 368 Zika cases. One hundred seven cases with rash had sufficient data for detailed analysis. 8.4% of cases with rash had hemorrhagic manifestations such as palatal petechiae and bleeding ulcers. Only 20 reported cases were tested for viremia during presence of rash, and 70.6% of these cases were positive. While mucocutaneous complications are common in Zika infection, more research is necessary to determine the impact of rash on diagnosis, prognosis, and transmissibility in Zika infection.

The value of precision oncology initiatives in Asian contexts remains unresolved. Here, we review the institutional implementation of prospective molecular screening to facilitate accrual of patients into biomarker-driven clinical trials, and to explore the mutational landscape of advanced tumors occurring in a prospective cohort of Asian patients (n = 396) with diverse cancer types. Next-generation sequencing (NGS) and routine clinicopathological assays, such as immunohistochemistry, copy number analysis and in situ hybridization tests, were performed on tumor samples. Actionable biomarker results were used to identify eligibility for early-phase, biomarker-driven clinical trials. Overall, NGS was successful in 365 of 396 patients (92%), achieving a mean depth of 1,943× and coverage uniformity of 96%. The median turnaround time from sample receipt to return of genomic results was 26.0 days (IQR, 19.0-39.0 days). Reportable mutations were found in 300 of 365 patients (82%). Ninety-one percent of patients at study enrollment indicated consent to receive incidental findings and willingness to undergo genetic counseling if required. The most commonly mutated oncogenes included KRAS (19%), PIK3CA (16%), EGFR (5%), BRAF (3%) and KIT (3%); while the most frequently mutated tumor suppressor genes included TP53 (40%), SMARCB1 (12%), APC (8%), PTEN (6%) and SMAD4 (5%). Among 23 patients enrolled in genotype-matched trials, median progression-free survival was 2.9 months (IQR, 1.5-4.0 months). Nine of 20 evaluable patients (45%; 95% CI, 23.1-68.5%) derived clinical benefit, including 3 partial responses and 6 with stable disease lasting ≥ 8 weeks., (© 2017 UICC.)