Search

This paper focuses on the surface modification of the Ti-6Al-4V alloy substrate via a-C:H:SiO x coating deposition. Research results concern the a-C:H:SiO x coating structure, investigated using transmission electron microscopy and in vitro endothelization to study the coating. Based on the analysis of the atomic radial distribution function, a model is proposed for the atomic short-range order structure of the a-C:H:SiO x coating, and chemical bonds (C-O, C-C, Si-C, Si-O, and Si-Si) are identified. It is shown that the a-C:H:SiO x coating does not possess prolonged cytotoxicity in relation to EA.hy926 endothelial cells. In vitro investigations showed that the adhesion, cell number, and nitric oxide production by EA.hy926 endothelial cells on the a-C:H:SiO x -coated Ti-6Al-4V substrate are significantly lower than those on the uncoated surface. The findings suggest that the a-C:H:SiO x coating can reduce the risk of endothelial cell hyperproliferation on implants and medical devices, including mechanical prosthetic heart valves, endovascular stents, and mechanical circulatory support devices.

At present, the use of alternative systems to replenish the lost functions of hepatic metabolism and partial replacement of liver organ failure is relevant, due to an increase in the incidence of various liver disorders, insufficiency, and cost of organs for transplantation, as well as the high cost of using the artificial liver systems. The development of low-cost intracorporeal systems for maintaining hepatic metabolism using tissue engineering, as a bridge before liver transplantation or completely replacing liver function, deserves special attention. In vivo applications of intracorporeal fibrous nickel-titanium scaffolds (FNTSs) with cultured hepatocytes are described. Hepatocytes cultured in FNTSs are superior to their injections in terms of liver function, survival time, and recovery in a CCl 4 -induced cirrhosis rats' model. 232 animals were divided into 5 groups: control, CCl 4 -induced cirrhosis, CCl 4 -induced cirrhosis followed by implantation of cell-free FNTSs (sham surgery), CCl 4 -induced cirrhosis followed by infusion of hepatocytes (2 mL, 10 7 cells/mL), and CCl 4 -induced cirrhosis followed by FNTS implantation with hepatocytes. Restoration of hepatocyte function in the FNTS implantation with the hepatocytes group was accompanied by a significant decrease in the level of aspartate aminotransferase (AsAT) in blood serum compared to the cirrhosis group. A significant decrease in the level of AsAT was noted after 15 days in the infused hepatocytes group. However, on the 30th day, the AsAT level increased and was close to the cirrhosis group due to the short-term effect after the introduction of hepatocytes without a scaffold. The changes in alanine aminotransferase (AlAT), alkaline phosphatase (AlP), total and direct bilirubin, serum protein, triacylglycerol, lactate, albumin, and lipoproteins were similar to those in AsAT. The survival time of animals was significantly longer in the FNTS implantation with hepatocytes group. The obtained results showed the scaffolds' ability to support hepatocellular metabolism. The development of hepatocytes in FNTS was studied in vivo using 12 animals using scanning electron microscopy. Hepatocytes demonstrated good adhesion to the scaffold wireframe and survival in allogeneic conditions. Mature tissue, including cellular and fibrous, filled the scaffold space by 98% in 28 days. The study shows the extent to which an implantable "auxiliary liver" compensates for the lack of liver function without replacement in rats.

The article deals with the plasma-assisted chemical vapor deposition of 0.3-1.4 μm thick a-C:H:SiO x films in a mixture of argon and polyphenylmethylsiloxane vapor onto the Ti-6Al-4V alloy substrate, which is often used as an implant material. The a-C:H:SiO x film structure is studied by the Fourier-transform infrared and Raman spectroscopies. The pull-off adhesion test assesses the adhesive strength of a-C:H:SiO x films, and the ball-on-disk method is employed to measure their wear rate and friction coefficient. According to these studies, a-C:H:SiO x films are highly adhesive to the Ti-6Al-4V substrate, have low (0.056) friction coefficient and wear rate (9.8 × 10 -8  mm 3  N -1  m -1 ) in phosphate-buffered saline at 40°C. In vitro studies show neither thrombogenicity nor cytotoxicity of the a-C:H:SiO x film for the human blood mononuclear cells (hBMNCs). The in vitro contact between the hBMNC culture and a-C:H:SiO x films 0.8-1.4 μm thick deposited onto Ti-6Al-4V substrates reduces a 24-hour secretion of pro-inflammatory cytokines and chemokines IL-8, IL-17, TNFα, RANTES, and MCP-1. This reduction is more significant when the film thickness is 1.4 μm and implies its potential anti-inflammatory effect and possible application in cardiovascular surgery. The dependence is suggested for the concentration of anti-inflammatory cytokines and chemokines and the a-C:H:SiO x film thickness, which correlates with the surface wettability and electrostatic potential. The article discusses the possible applications of the anti-inflammatory effect and low thrombogenicity of a-C:H:SiO x films in cardiovascular surgery., (© 2022 Wiley Periodicals LLC.)

Nowadays, vascular stents are commonly used to treat cardiovascular diseases. This article focuses on the influence of nitrogen doping of titanium dioxide thin films, utilized for coating metallic stents to improve their biological properties and biocompatibility. The hereby-investigated titanium oxide thin films are fabricated by magnetron sputtering in a reactive gas atmosphere consisting of argon and oxygen in the first case and argon, nitrogen and oxygen in the second case. Control of the nitrogen and oxygen gas flow rates, and hence their mixing ratios, allows adjustment of the nitrogen-doping level within the titanium dioxide thin films. A correlation of the thin film internal structure on the in vitro behavior of human mesenchymal stem cells derived from adipose tissue is hereby demonstrated. Different nitrogen doping levels affect the surface energy, the wettability, the cell adhesion and thus the cellular proliferation on top of the thin films. The surface colonization of cells on titanium dioxide thin films decreases up to a nitrogen-doping level of ∼ 3.75 at.%, which is associated with a decreasing polar component of the surface energy. For non-doped titanium dioxide thin films, a weak chondrogenesis of adult human adipose-derived mesenchymal stem cells with lower chondrogenic differentiation compared to glass is observed. An increasing nitrogen-doping level leads to linear increase in the chondrogenic differentiation rate, which is comparable to the control value of uncoated glass. Other investigated differentiated cell types do not display this behavior., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Inc. All rights reserved.)

The use of fibrous scaffolds made of titanium nickelide and carrying islet cells (IC) after a course of alloxan administration was studied in vivo. Scanning electron microscopy showed good adhesion of IC in the pore space of the scaffolds. In 28 days, mature tissue comprising both cellular and fibrous components filled the inner space of the scaffold by 90%. The advantage of intraperitoneal implantation of IC in vitro seeded in fibrous titanium nickelide scaffolds in comparison with injection of IC (6×10 5 cells) to Wistar rats was demonstrated in the dynamics of pancreatic function recovery (normalization of blood glucose and glycosylated hemoglobin concentrations by day 21 of the experiment), regeneration of the white hematopoietic lineage cells, and lengthening (by 2 times) of the lifespan of animals with alloxan-induced diabetes. Injection of IC improved rat survival by only 40%. Thus, the hybrid tissue-engineered construct (fibrous titanium nickelide scaffold+IC) is biocompatible when administered intraperitoneally, stimulates regeneration in rats with alloxan-induced diabetes, improves blood glucose utilization processes, and restores suppressed leukopoiesis. It is assumed that hepatocytes can be the main target cells of the hybrid tissue-engineering construct., (© 2022. Springer Science+Business Media, LLC, part of Springer Nature.)

Functionalization of titanium (Ti)-based alloy implant surfaces by deposition of calcium phosphates (CaP) has been widely recognized. Substituted hydroxyapatites (HA) allow the coating properties to be tailored based on the use of different Ca substitutes. The formation of antibacterial CaP coatings with the incorporation of Zn or Cu by an RF magnetron sputtering is proposed. The influence of RF magnetron targets elemental composition and structure in the case of Zn-HA and Cu-HA, and the influence of substrate's grain size, the substrate's temperature during the deposition, and post-deposition heat treatment (HT) on the resulting coatings are represented. Sintering the targets at 1150 °C resulted in a noticeable structural change with an increase in cell volume and lattice parameters for substituted HA. The deposition rate of Cu-HA and Zn-HA was notably higher compared to stochiometric HA (10.5 and 10) nm/min vs. 9 ± 0.5 nm/min, respectively. At the substrate temperature below 100 °C, all deposited coatings were found to be amorphous with an atomic short-range order corresponding to the {300} plane of crystalline HA. All deposited coatings were found to be hyper-stochiometric with Ca/P ratios varying from 1.9 to 2.5. An increase in the substrate temperature to 200 °C resulted in the formation of equiaxed grain structure on both coarse-grained (CG) and nanostructured (NS) Ti. The use of NS Ti notably increased the scratch resistance of the deposited coatings from18 ± 1 N to 22 ± 2 N. Influence of HT in air or Ar atmosphere is also discussed. Thus, the deposition of Zn- or Cu-containing CaP is a complex process that could be fine-tuned using the obtained research results.

Drug delivery systems based on calcium phosphate (CaP) coatings have been recently recognized as beneficial drug delivery systems in complex cases of bone diseases for admission of drugs in the localized area, simultaneously inducing osteoinduction because of the bioavailable Ca and P ions. However, micro-arc oxidation (MAO) deposition of CaP does not allow for the formation of a coating with sufficient interconnected porosity for drug delivery purposes. Here, we report on the method to deposit CaP-based coatings using a new hybrid ultrasound-assisted MAO (UMAOH) method for deposition of coatings for drug delivery that could carry various types of drugs, such as cytostatic, antibacterial, or immunomodulatory compositions. Application of UMAOH resulted in coatings with an Ra roughness equal to 3.5 µm, a thickness of 50-55 µm, and a combination of high values of internal and surface porosity, 39 and 28%, respectively. The coating is represented by the monetite phase that is distributed in the matrix of amorphous CaP. Optimal conditions of coating deposition have been determined and used for drug delivery by impregnation with Vancomycin, 5-Fluorouracil, and Interferon-α-2b. Cytotoxicity and antimicrobial activity of the manufactured drug-carrying coatings have been studied using the three different cell lines and methicillin-resistant S. aureus .

A number of preclinical and clinical studies have demonstrated the efficiency of mesenchymal stromal cells to serve as an excellent base for a cell-mediated drug delivery system. Cell-based targeted drug delivery has received much attention as a system to facilitate the uptake a nd transfer of active substances to specific organs and tissues with high efficiency. Human mesenchymal stem cells (MSCs) are attracting increased interest as a promising tool for cell-based therapy due to their high proliferative capacity, multi-potency, and anti-inflammatory and immunomodulatory properties. In particular, these cells are potentially suitable for use as encapsulated drug transporters to sites of inflammation. Here, we studied the in vitro effects of incorporating synthetic polymer microcapsules at various microcapsule-to-cell ratios on the morphology, ultrastructure, cytokine profile, and migration ability of human adipose-derived MSCs at various time points post-phagocytosis. The data show that under appropriate conditions, human MSCs can be efficiently loaded with synthesized microcapsules without damaging the cell's structural integrity with unexpressed cytokine secretion, retained motility, and ability to migrate through 8 μm pores. Thus, the strategy of using human MSCs as a delivery vehicle for transferring microcapsules, containing bioactive material, across the tissue-blood or tumor-blood barriers to facilitate the treatment of stroke, cancer, or inflammatory diseases may open a new therapeutic perspective., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Litvinova, Shupletsova, Khaziakhmatova, Daminova, Kudryavtseva, Yurova, Malashchenko, Todosenko, Popova, Litvinov, Korotkova, Sukhorukov, Gow, Weissman, Atochina-Vasserman and Khlusov.)

Among medical gases, including gases used therapeutically, this review discusses the comparative physiological activity of three gases - ozone (O 3 ), xenon (Xe) and molecular hydrogen (H 2 ), which together form representatives of three types of substances - typical oxidizing, inert, and typical reducing agents. Upon analysis of published and proprietary data, we concluded that these three medical gases can manipulate the neuroendocrine system, by modulating the production or release of hormones via the hypothalamic-pituitary-adrenal, hypothalamic-pituitary-thyroid, hypothalamic-pituitary-gonadal axes, or the gastrointestinal pathway. With repeated administration of the gases over time, these modulations become a predictable consequence of conditioned homeostatic reflexes, resulting in regulation of physiological activity. For example, the regular activation of the unconditioned defense reflex in response to repeated intoxication by ozone leads to the formation of an anticipatory stable conditioned response, which counteracts the toxic action of O 3 . The concept of a Pavlovian conditioned reflex (or hormoligosis) is a brief metaphor for the understanding the therapeutic effect of systemic ozone therapy., Competing Interests: None

Composite poly-L-lactide acid-based scaffolds with hydroxyapatite (HAp) content up to 75 wt.% were fabricated via solution blow spinning. The influence of HAp concentration on structure, wettability, mechanical properties and chemical and phase composition of the produced materials was examined. It was found that with an increase of HAp content the average fiber diameter was increased, the uniaxial strength and relative elongation were reduced, while the phase composition and surface wettability did not change. The performance of the scaffolds during implantation in the parietal bone of a rat skull for a period from 15 to 90 days was studied. The materials have shown high ability to integrate with both soft and hard tissues. It was found that scaffolds with 25 wt.% HAp content significantly enhance osteogenesis during scarification (damage) of the periosteum. Overall, the fabricated scaffolds proved to be highly efficient for replacing bone defects in long tubular bones., (© 2021 IOP Publishing Ltd.)

A modern trend in traumatology, orthopedics, and implantology is the development of materials and coatings with an amorphous-crystalline structure that exhibits excellent biocopatibility. The structure and physico-chemical and biological properties of calcium phosphate (CaP) coatings deposited on Ti plates using the micro-arc oxidation (MAO) method under different voltages (200, 250, and 300 V) were studied. Amorphous, nanocrystalline, and microcrystalline statesof CaHPO 4 and β-Ca 2 P 2 O 7 were observed in the coatings using TEM and XRD. The increase in MAO voltage resulted in augmentation of the surface roughness R a from 2.5 to 6.5 µm, mass from 10 to 25 mg, thickness from 50 to 105 µm, and Ca/P ratio from 0.3 to 0.6. The electrical potential (EP) of the CaP coatings changed from -456 to -535 mV, while the zeta potential (ZP) decreased from -53 to -40 mV following an increase in the values of the MAO voltage. Numerous correlations of physical and chemical indices of CaP coatings were estimated. A decrease in the ZP magnitudes of CaP coatings deposited at 200-250 V was strongly associated with elevated hTERT expression in tumor-derived Jurkat T cells preliminarily activated with anti-CD2/CD3/CD28 antibodies and then contacted in vitro with CaP-coated samples for 14 days. In turn, in vitro survival of CD4 + subsets was enhanced, with proinflammatory cytokine secretion of activated Jurkat T cells. Thus, the applied MAO voltage allowed the regulation of the physicochemical properties of amorphous-crystalline CaP-coatings on Ti substrates to a certain extent. This method may be used as a technological mechanism to trigger the behavior of cells through contact with micro-arc CaP coatings. The possible role of negative ZP and Ca 2 + as effectors of the biological effects of amorphous-crystalline CaP coatings is discussed. Micro-arc CaP coatings should be carefully tested to determine their suitability for use in patients with chronic lymphoid malignancies.

The paper focuses on the SiO x -doped amorphous hydrocarbon (a-C:H:SiO x ) coating on the titanium (Ti-6Al-4V) alloy substrate obtained by plasma-assisted chemical vapor deposition (PACVD) in a mixture of argon gas and polyphenylmethylsiloxane vapor using a bipolar substrate bias. It is shown that the a-C:H:SiO x coating deposition results in the formation of a negative surface potential important for application of this coating for medical implants. The a-C:H:SiO x coatings improve the corrosion resistance of Ti alloy to 0.5 M NaCl solution and phosphate-buffered saline. In particular, the corrosion current density of the a-C:H:SiO x -coated sample in a 0.5 M NaCl solution at 22 °C decreases from 1∙10 -8 to 1.7∙10 -10 A/cm 2 , that reduces the corrosion rate from 9∙10 -5 to 15∙10 -7  mm/year. The a-C:H:SiO x coating facilitates the surface endothelization of an implant located in the thoracic aorta of a mini pig, and reduces the risk of thrombosis and implant failure. This effect can be explained by the ability of the a-C:H:SiO x coating ability to reduce in vitro a 24-hour secretion of pro-inflammatory interleukins (IL-6, IL-12(p70), IL-15, and IL-17) and cytokines (IFN-g and TNF-a) by blood mononuclear cells (MNCs) and elevates the concentration of anti-inflammatory interleukin IL-1Ra. In vitro analysis shows no cytotoxicity of the a-C:H:SiO x coating for the human blood MNCs, suggesting a promising PACVD on Ti alloys for cardiovascular implants, including pumps for mechanical heart support systems., (Copyright © 2021 Elsevier B.V. All rights reserved.)

The review considers complex, controversial, and individual effects of heparin and its derivatives on the bone and circulatory systems in dependence of the dose, the state of the cells and tissues of the recipient. General data on the anticoagulant activity of heparin and its derivatives are presented; special attention is paid to the effect of heparin on mesenchymal cells and tissues and its role in angiogenesis. We also discuss the ability of heparin to bind osteogenic and angiogenic biomolecules in the context of the development of systems for their delivery and sustained controlled release and propose a schematic representation of the positive and side effects of heparin as a delivery system for biomolecules in tissue engineering., Competing Interests: CONFLICT OF INTERESTSThe authors declare that they have no conflicts of interest., (© Pleiades Publishing, Ltd. 2021, ISSN 1990-7508, Biochemistry (Moscow), Supplement Series B: Biomedical Chemistry, 2021, Vol. 15, No. 2, pp. 147–152. © Pleiades Publishing, Ltd., 2021.Russian Text © The Author(s), 2020, published in Biomeditsinskaya Khimiya.)

Background: Molecular genetic mechanisms, signaling pathways, conditions, factors, and markers of the osteogenic differentiation of mesenchymal stem cells (MSCs) are being actively studied and are among the most studied areas in the field of cellular technology. This attention is largely due to the mounting contradictions in the seemingly classical knowledge and the constant updating of results in the analyzed areas. In this regard, we focus on the main classical concepts and some new factors and mechanisms that have a noticeable regulatory effect on the differentiation potential of postnatal MSCs., Results: This review considers the importance of the sources of MSCs for the realization of their differentiation potential, molecular genetic factors and signaling pathways of MSC differentiation, the role of inflammatory cytokines and chemokines in osteogenesis, biomechanical signals, and the effect of conformational changes in the cellular cytoskeleton on MSC differentiation., Conclusion: It is concluded that it is necessary to move from studies focused on the effects of local genes to those taking multiple measurements of the gene-regulatory profile and the biomolecules critical for the implementation of numerous, incompletely studied osteogenic factors of endogenous and exogenous origin. Among the cornerstones of future (epi)genetic studies, whether osteomodulatory effects are realized through specific signaling pathways and/or whether cross-signaling with known genes drives the osteogenic differentiation of MSCs remains to be determined., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

The review discusses the complex, ambiguous and individual effects of heparin and its derivatives on the bone and circulatory systems, in dependence of the dosage, the state of the cells and tissues of recipients. General data on the anticoagulant activity of heparin and its derivatives are presented; aspects of the effect of heparin on mesenchymal cells and tissues and its role in angiogenesis are considered in details. Particular attention is paid to the ability of heparin to bind osteogenic and angiogenic biomolecules: thus us especially important for the development of systems for their delivery and sustained controlled release. A schematic representation of the positive and side effects of heparin as a delivery system for biomolecules in tissue engineering is proposed.

Calcium phosphate (CaP) materials do not always induce ectopic vascularization and bone formation; the reasons remain unclear, and there are active discussions of potential roles for post-implantation hematoma, circulating immune and stem cells, and pericytes, but studies on adipose-derived stem cells (AMSCs) in this context are lacking. The rough (average surface roughness R a = 2-5 µm) scaffold-like CaP coating deposited on pure titanium plates by the microarc oxidation method was used to investigate its subcutaneous vascularization in CBA/CaLac mice and in vitro effect on cellular and molecular crosstalk between human blood mononuclear cells (hBMNCs) and AMSCs (hAMSCs). Postoperative hematoma development on the CaP surface lasting 1-3 weeks may play a key role in the microvessel elongation and invasion into the CaP relief at the end of the 3rd week of injury and BMNC migration required for enhanced wound healing in mice. Satisfactory osteogenic and chondrogenic differentiation but poor adipogenic differentiation of hAMSCs on the rough CaP surface were detected in vitro by differential cell staining. The fractions of CD73 + (62%), CD90 + (0.24%), and CD105 + (0.41%) BMNCs may be a source of autologous circulating stem/progenitor cells for the subcutis reparation, but allogenic hBMNC participation is mainly related to the effects of CD4 + T cells co-stimulated with CaP coating on the in vitro recruitment of hAMSCs, their secretion of angiogenic and osteomodulatory molecules, and the increase in osteogenic features within the period of in vivo vascularization. Cellular and molecular crosstalk between BMNCs and AMSCs is a model of effective subcutis repair. Rough CaP surface enhanced angio- and osteogenic signaling between cells. We believe that preconditioning and/or co-transplantation of hAMSCs with hBMNCs may broaden their potential in applications related to post-implantation tissue repair and bone bioengineering caused by microarc CaP coating.

This work describes the wettability and biological performance of Zn- and Cu-containing CaP-based coatings prepared by micro-arc oxidation on pure titanium (Ti) and novel Ti-40Nb alloy. Good hydrophilic properties of all the coatings were demonstrated by the low contact angles with liquids, not exceeding 45°. An increase in the applied voltage led to an increase of the coating roughness and porosity, thereby reducing the contact angles to 6° with water and to 17° with glycerol. The free surface energy of 75 ± 3 mJ/m 2 for all the coatings were determined. Polar component was calculated as the main component of surface energy, caused by the presence of strong polar PO 4 3- and OH - bonds. In vitro studies showed that low Cu and Zn amounts (~0.4 at.%) in the coatings promoted high motility of human adipose-derived multipotent mesenchymal stromal cells (hAMMSC) on the implant/cell interface and subsequent cell ability to differentiate into osteoblasts. In vivo study demonstrated 100% ectopic bone formation only on the surface of the CaP coating on Ti. The Zn- and Cu-containing CaP coatings on both substrates and the CaP coating on the Ti-40Nb alloy slightly decreased the incidence of ectopic osteogenesis down to 67%. The MAO coatings showed antibacterial efficacy against S taphylococcus aureus and can be arranged as follows: Zn-CaP/Ti > Cu-CaP/TiNb, Zn-CaP/TiNb > Cu-CaP/Ti., Competing Interests: The authors declare no conflict of interest.

Calcium phosphate (CaP) materials are among the best bone graft substitutes, but their use in the repair of damaged bone in tumor patients is still unclear. The human Jurkat T lymphoblast leukemia-derived cell line (Jurkat T cells) was exposed in vitro to a titanium (Ti) substrate (10 × 10 × 1 mm 3 ) with a bilateral rough (average roughness index ( R a ) = 2-5 μm) CaP coating applied via the microarc oxidation (MAO) technique, and the morphofunctional response of the cells was studied. Scanning electron microscopy (SEM), X-ray diffraction (XRD), and energy dispersive X-ray spectroscope (EDX) analyses showed voltage-dependent (150-300 V) growth of structural ( R a index, mass, and thickness) and morphological surface and volume elements, a low Ca/P aT ratio (0.3-0.6), and the appearance of crystalline phases of CaHPO 4 (monetite) and β-Ca 2 P 2 O 7 (calcium pyrophosphate). Cell and molecular reactions in 2-day and 14-day cultures differed strongly and correlated with the Ra values. There was significant upregulation of hTERT expression (1.7-fold), IL-17 secretion, the presentation of the activation antigens CD25 (by 2.7%) and CD95 (by 5.15%) on CD4 + cells, and 1.5-2-fold increased cell apoptosis and necrosis after two days of culture. Hyperactivation-dependent death of CD4 + cells triggered by the surface roughness of the CaP coating was proposed. Conversely, a 3.2-fold downregulation in hTERT expression increased the percentages of CD4 + cells and their CD95 + subset (by 15.5% and 22.9%, respectively) and inhibited the secretion of 17 of 27 test cytokines/chemokines without a reduction in Jurkat T cell survival after 14 days of coculture. Thereafter, cell hypoergy and the selection of an hTERT- independent viable CD4 + subset of tumor cells were proposed. The possible role of negative zeta potentials and Ca 2+ as effectors of CaP roughness was discussed. The continuous (2-14 days) 1.5-6-fold reductions in the secretion of vascular endothelial growth factor (VEGF) by tumor cells correlated with the R a values of microarc CaP-coated Ti substrates seems to limit surgical stress-induced metastasis of lymphoid malignancies.

Zn- and Cu-containing CaP‑based coatings, obtained by micro-arc oxidation process, were deposited on substrates made of pure titanium (Ti) and novel Ti-40Nb alloy. The microstructure, phase, and elemental composition, as well as physicochemical and mechanical properties, were examined for unmodified CaP and Zn- or Cu-containing CaP coatings, in relation to the applied voltage that was varied in the range from 200 to 350 V. The unmodified CaP coatings on both types of substrates had mainly an amorphous microstructure with a minimal content of the CaHPO 4 phase for all applied voltages. The CaP coatings modified with Zn or Cu had a range from amorphous to nano- and microcrystalline structure that contained micro-sized CaHPO 4 and Ca(H 2 PO 4 ) 2 ·H 2 O phases, as well as nano‑sized β‑Ca 2 P 2 O 7 , CaHPO 4 , TiO 2 , and Nb 2 O 5 phases. The crystallinity of the formed coatings increased in the following order: CaP/TiNb < Zn-CaP/TiNb < Cu-CaP/TiNb < CaP/Ti < Zn-CaP/Ti < Cu-CaP/Ti. The increase in the applied voltage led to a linear increase in thickness, roughness, and porosity of all types of coatings, unlike adhesive strength that was inversely proportional to an increase in the applied voltage. The increase in the applied voltage did not affect the Zn or Cu concentration (~0.4 at%), but led to an increase in the Ca/P atomic ratio from 0.3 to 0.7.

Secretion of 21 cytokines, chemokines and growth factors (LIF, SCF, SDF-1a, SCGF-b, M-CSF, MCP-3, MIF, MIG, TRAIL, GRO-a; IL-1a, IL-2ra, IL-3, IL-12(p40), IL-16, IL-18, HGF, TNF-b, b-NGF, IFN-a2, CTACK) has been studied in vitro in the culture of human adipose-derived multipotent mesenchymal stromal cells (hAMMSCs) in conditions of its osteogenic differentiation caused by 14-day contact with calcium phosphate (CP) surface with different roughness. Bilateral X-ray amorphous CP coatings were prepared on the samples of commercially pure titanium in the anodal regime using a micro-arc method. An aqueous solution prepared from 20 wt% phosphoric acid, 6 wt% dissolved hydrohyapatite nanopowder (particle diameter 10-30 nm with single agglomerates up to 100 nm), and 9 wt% dissolved calcium carbonate was used to obtain CP coating. hAMMSCs isolated from lipoaspirate were co-cultured after 4 passages with the CP-coated samples at final concentration of 1.5´105 viable karyocytes per 1.5 mL of standard nutrition medium (without osteogenic stimulators) for 14 days (a determination of [CD45,34,14,20], CD73, CD90 и CD105 cell immunophenotype; an analysis of secretory activity) and 21 days (alizarin red S staining of culture) with medium replacement every 3-4 days. Under conditions of in vitro contact with rough CP coating hAMMSCs differentiated into osteoblasts synthesizing the mineralized bone matrix; this was accompanied by 2-3-fold increasing ratio of [CD45,34,14,20]+ hemopoietic cells. The following humoral factors of hemopoietic niches acted as the signal molecules escalating in vitro the hemopoietic base in 14 days of differentiating three-dimensional culture of hAMMSCs: either leukemia inhibitory factor (LIF) and stem cell factor (SCF) cytokines under mean index of CP roughness Ra=2.4-2.6 mm or stromal derived factor-1 (SDF-1a, CXCL12 chemokine) under Ra=3.1-4.4 mm.

Background: Two-stage surgery including right ventricular outflow tract (RVOT) stenting with subsequent total surgical repair (TSG) has been suggested as a promising curative option in infants with tetralogy of Fallot (ToF) having comorbidities such as low body weight. However, data on clinical outcomes of such approach and tissue response to RVOT stenting in underweight infants are scarce., Methods: We recruited 16 underweight (<3 kg; average weight, 2.2 ± 0.4 and 4.7 ± 0.9 kg at the time of RVOT stenting and TSG, respectively) infants (1-3 months of age, average 28.2 ± 4.3 and 100.2 ± 22.3 days at the time of RVOT stenting and TSG, respectively) with ToF and performed RVOT stenting with the subsequent TSG. Excised stents were embedded into epoxy resin and stained by toluidine blue and basic fuchsin., Results: Fifteen infants had a favorable clinical outcome, probably due to the rapid increase in the body weight, blood oxygen saturation, and left ventricular end-diastolic volume to body surface area ratio indicative of improved pulmonary perfusion. Histological analysis revealed an endothelial cell monolayer at the stent surface with notable neovascularization of stented tissues, which could potentially explain the abovementioned clinical and echocardiography improvements. The only death occurred immediately after RVOT stenting and was caused by a massive subdural hematoma, possibly provoked by grade 2 intraventricular hemorrhage 12 days before the stenting., Conclusions: We confirm RVOT stenting with the subsequent TSG as a safe and efficient surgical approach for the treatment of underweight children with ToF., (© 2019 Wiley Periodicals, Inc.)

This study aims to investigate the comparative study of calcium phosphate coatings for flexible intramedullary nails (FINs) used to lengthen long tubular bones. The presence of a calcium phosphate coating deposited by micro-arc oxidation (MAO) or a composite coating based on a co-polymer of vinylidene fluoride with tetrafluoroethylene (VDF-TeFE) and hydroxyapatite (HA) on the surface of the FIN significantly enhanced the regeneration of bone in the area of osteotomy during limb lengthening by combined osteosynthesis. The investigation of the physico-chemical properties of the FIN coated with calcium phosphate via MAO demonstrated that the improved bone tissue formation resulted from favourable conditions for adhesion, proliferation and differentiation of multipotent stem cells into osteoblasts on the coating surface. The composite coatings only stimulated the formation of bone tissue in vivo, primarily because of the piezoelectric properties of the VDF-TeFE co-polymer.

In evolutionary processes, human bone marrow has formed as an organ depot of various types of cells that arise from hematopoietic stem cells (HSCs) and mesenchymal stem cells (MSCs). Vital HSC activity is controlled through molecular interactions with the niche microenvironment. The review describes current views on the formation of key molecular and cellular components of the HSC niche, which ensure maintenance of home ostasis in stem cell niches, obtained from studies of their role in regulating the proliferation and differentiation of HSCs, including the physiological, reparative and pathological remodeling of bone tissue. Due to rapid developments in biotechnology, tissue bioengineering, and regenerative medicine, information can be useful for developing biomimetic and bioinspired materials and implants that provide an effective bone/bone marrow recovery process after injuries and, to a greater extent, diseases of various etiologies., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

In this study, thin calcium phosphate (Ca-P) coatings were deposited on zirconia substrates by radiofrequency (RF) magnetron sputtering using different calcium phosphate targets (calcium phosphate tribasic (CPT), hydroxyapatite (HA), calcium phosphate monobasic, calcium phosphate dibasic dehydrate (DCPD) and calcium pyrophosphate (CPP) powders). The sputtering of calcium phosphate monobasic and DCPD powders was carried out without an inert gas in the self-sustaining plasma mode. The physico-chemical, mechanical and biological properties of the coatings were investigated. Cell adhesion on the coatings was examined using mesenchymal stem cells (MSCs). The CPT coating exhibited the best cell adherence among all the samples, including the uncoated zirconia substrate. The cells were spread uniformly over the surfaces of all samples., Competing Interests: The authors declare no conflict of interest.

The electrochemical behavior of Fe 3 O 4 nanoparticles, iron nanoparticles coated with carbon, and diazonium salts by voltammetry methods using a carbon paste electrode (CPE) has been studied. There has been developed a voltammetric method for identifying and quantifying solid-phase iron-based nanoparticles in the background electrolyte of 0.02 mole/dm 3 Trilon B (pH 3.5) with the use of the CPE. Investigations of nanoparticles' stability with various coatings in a simulated solution of gastric juice have been carried out. Nanoparticles stability has been evaluated on the basis of determining Fe(III) ions in a simulated solution after contacting with nanoparticles within different periods of time using the method of inversion voltammetry. It has been shown that nanoparticles coated with carbon and salts of arendiazonium are the most resistant to aggressive media.

Mesenchymal stem cells (MSCs) and osteoblasts respond to the surface electrical charge and topography of biomaterials. This work focuses on the connection between the roughness of calcium phosphate (CP) surfaces and their electrical potential (EP) at the micro- and nanoscales and the possible role of these parameters in jointly affecting human MSC osteogenic differentiation and maturation in vitro. A microarc CP coating was deposited on titanium substrates and characterized at the micro- and nanoscale. Human adult adipose-derived MSCs (hAMSCs) or prenatal stromal cells from the human lung (HLPSCs) were cultured on the CP surface to estimate MSC behavior. The roughness, nonuniform charge polarity, and EP of CP microarc coatings on a titanium substrate were shown to affect the osteogenic differentiation and maturation of hAMSCs and HLPSCs in vitro. The surface EP induced by the negative charge increased with increasing surface roughness at the microscale. The surface relief at the nanoscale had an impact on the sign of the EP. Negative electrical charges were mainly located within the micro- and nanosockets of the coating surface, whereas positive charges were detected predominantly at the nanorelief peaks. HLPSCs located in the sockets of the CP surface expressed the osteoblastic markers osteocalcin and alkaline phosphatase. The CP multilevel topography induced charge polarity and an EP and overall promoted the osteoblast phenotype of HLPSCs. The negative sign of the EP and its magnitude at the micro- and nanosockets might be sensitive factors that can trigger osteoblastic differentiation and maturation of human stromal cells.

Background: R. Schofield (1978) proposed a hypothesis of hematopoietic stem cells (HSCs) niche (specialized cell microenvironment). An existence of osteoblastic and vascular niches for HSCs has been postulated since 2003. At the same time, the discussion about the existence and functioning of niche for multipotent mesenchymal stromal cells (MMSCs) is just beginning to develop. The design of artificial materials capable of biomimetical reproductionof the cellular and tissue microenvironment based on ideas and main elements borrowed from wildlife is an experimental approach in search of the stem cell niches., Results: Recent attempts to model the microterritories (niches) for HSCs have been undertaken and the behavior of cells in such structures has been investigated. However, the main quantitative factors involved in the original design of stem cell microterritories remain unknown. At the modern stage, the topography, hierarchy, and the size of the niches have to be determined, because the definition of the niches as morphological (structural and functional) units (microterritories), which provides the conditions for vital activity of stem cells, implies finite values of its parameters. The aim of this review was the critical review of key milestones of the niche concept for HSCs and MMSCs as we understood it., Conclusion: We speculated our definition of the stem cell niche, proposed and described certain stages (postulation; morphofunctional; topographical; quantitative; bioengineering) of the niche theory development. Prospective directions of the niche designing for cell-based diagnostics and regenerative medicine were noted., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.)

Present day biomedical applications, including magnetic biosensing, demand better understanding of the interactions between living systems and magnetic nanoparticles (MNPs). In this work spherical MNPs of maghemite were obtained by a highly productive laser target evaporation technique. XRD analysis confirmed the inverse spinel structure of the MNPs (space group Fd-3m). The ensemble obeyed a lognormal size distribution with the median value 26.8 nm and dispersion 0.362. Stabilized water-based suspensions were fabricated using electrostatic or steric stabilization by the natural polymer chitosan. The encapsulation of the MNPs by chitosan makes them resistant to the unfavorable factors for colloidal stability typically present in physiological conditions such as pH and high ionic force. Controlled amounts of suspensions were used for in vitro experiments with human blood mononuclear leukocytes (HBMLs) in order to study their morphofunctional response. For sake of comparison the results obtained in the present study were analyzed together with our previous results of the study of similar suspensions with human mesenchymal stem cells. Suspensions with and without chitosan enhanced the secretion of cytokines by a 24-h culture of HBMLs compared to a control without MNPs. At a dose of 2.3, the MTD of chitosan promotes the stimulating effect of MNPs on cells. In the dose range of MNPs 10-1000 MTD, chitosan "inhibits" cellular secretory activity compared to MNPs without chitosan. Both suspensions did not caused cell death by necrosis, hence, the secretion of cytokines is due to the enhancement of the functional activity of HBMLs. Increased accumulation of MNP with chitosan in the cell fraction at 100 MTD for 24 h exposure, may be due to fixation of chitosan on the outer membrane of HBMLs. The discussed results can be used for an addressed design of cell delivery/removal incorporating multiple activities because of cell capability to avoid phagocytosis by immune cells. They are also promising for the field of biosensor development for the detection of magnetic labels., Competing Interests: The authors declare no conflict of interest.

The Cell-IQ continuous surveillance system allowed us to establish the following changes in a 14- day culture in vitro: a twofold suppression of the directional migration of multipotent mesenchymal stromal cells of human adipose tissue (MMSC-AT) towards the samples with a microarc calcium phosphate (CP) coating from synthetic hydroxyapatite; a tenfold decrease in the cell mass on the interphase with the samples, which was accompanied by a slight reduction in the expression of membrane determinants of stromal stem cells; and an enhancement of their osteogenic differentiation (osteocalcin secretion and mineralized matrix formation) on the 21st day of the study. Calcium phosphate particles, but not the calcium and phosphorus ions, may trigger the phenotypic transformation of the MMSC-AT behavior in vitro.

This work presents composite coatings based on a copolymer of vinylidene fluoride with tetrafluoroethylene (VDF-TeFE) and hydroxyapatite (HA) for flexible intramedullary nails (FIN). The effect of the proportion of VDF-TeFE (100-25% wt.) on physicochemical and biological properties of the composite coatings was investigated. It was shown that a decrease of VDF-TeFE in the coating hinders its crystallization in β and γ forms which have piezoelectric properties. The decrease also reduces an adhesive strength to 9.9±2.4MPa and a relative elongation to 5.9±1.2%, but results in increased osteogenesis. It was demonstrated that the composite coatings with 35% VDF-TeFE has the required combination of physicochemical properties and osteogenic activity. Comparative studies of composite coatings (35% VDF-TeFE) and calcium phosphate coatings produced using micro-arc oxidation, demonstrated comparable results for strength of bonding of these FINs with trabecular bones (~530MPa). It was hypothesized that the high osteoinductive properties of the composite coatings are due to their piezoelectric properties., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Investigation results of micro-arc wollastonite-calcium phosphate (W-CaP) biocoatings on the pure titanium (Ti) and Zr-1wt.%Nb (Zr-1Nb) alloy were presented. The voltages of 150-300 V generate the micro-arc oxidation (MAO) process with the initial amplitude current of 150-550 A and 100-350 A for Ti and Zr-1Nb substrates, respectively. The identical dependencies of changes of the coating thickness, surface roughness and adhesion strength on the process voltage were revealed for the both substrates. The W-CaP coatings with the thickness of 10-11 μm were formed on Ti and Zr-1Nb under the low process voltage of 130-150 V. Elongated wollastonite particles with the size in the range of 40-100 μm were observed in such coatings. The structure of the coatings on Ti was presented by the X-ray amorphous and crystalline phases. The X-ray reflexes relating to the crystalline phases of Ti and wollastonite were observed only in XRD patterns of the coatings deposited under 130-200 V on Ti. While, the crystalline structure with phases of CaZr 4 (PO 4 ) 6 , β-ZrP 2 O 7 , ZrO 2 , and Zr was detected in the coatings on Zr-1Nb. FT-IRS, XRD, SEM, and TEM data confirmed that the increase of the process voltage to 300 V leads to the dissociation of the wollastonite. No toxic effect of specimens on a viability, morphology and motility of human adipose-derived multipotent mesenchymal stem cells was revealed in vitro .

Morphofunctional response of Jurkat T cells that were cultured for 24 h on substrates prepared from commercially pure titanium with relief microarc bilateral calcium phosphate coating containing copper or zinc was studied. Changes in the concentration of essential trace elements contained in this coating can cause significant imbalance of molecular processes of differentiation, secretion, apoptosis, and necrosis and reduce tumor cell survival.

The toxic effect of Al 2 O 3 , SiО 2 and ZrО 2 nanoparticles on red blood cells of Wistar rats was studied in vitro using the atomic force microscopy and the fluorescence analysis. Transformation of discocytes into echinocytes and spherocytes caused by the metal oxide nanoparticles was revealed. It was shown that only extremely high concentration of the nanoparticles (2mg/ml) allows correct estimating of their effect on the cell morphology. Besides, it was found out that the microviscosity changes of red blood cell membranes treated with nanoparticles began long before morphological modifications of the cells. On the contrary, the negatively charged ZrO 2 and SiO 2 nanoparticles did not affect ghost microviscosity up to concentrations of 1μg/ml and 0.1mg/ml, correspondingly. In its turn, the positively charged Al 2 O 3 nanoparticles induced structural changes in the lipid bilayer of the red blood cells already at a concentration of 0.05μg/ml. A decrease in microviscosity of the erythrocyte ghosts treated with Al 2 O 3 and SiO 2 nanoparticles was shown. It was detected that the interaction of ZrO 2 nanoparticles with the cells led to an increase in the membrane microviscosity and cracking of swollen erythrocytes., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Human leukemic T-lymphoblastoid cells (hereinafter Jurkat T-cells) were used to model T-lymphocytes morphofunctional reaction to 24-h in vitro contact with relief (roughness index Ra = 2.2--2.7 mm) pure titanium substrates (12&#95;12&#95;1 mm3) covered by calcium phosphate (CP) bilateral coating that was prepared by micro-arc method. Jurkat T-cell culture on plastic surface of well plate (2D control of culture growth), as well as the cells that contacted for 24 h with oxide (TiO2) micro-arc coating on pure titanium substrate (3D control) served as comparison tests. 27--98 % of immortalized cells in 2D control culture had CD3+CD4+CD71+CD45RA+ immunophenotype and secreted IL-2, IL-4, IL-8, IL-10 and TNFa, but not IL-1b and IL-6. Other markers of cell activation, differentiation, maturation and death (CD8, CD16, CD56, CD25, CD95) were found at 0—2.5% of the cell population. Microtextured CP surface elevated statistically IL-8 outcome to 183 and 160 % of corresponding control values in 2D- and 3D-cultures of Jurkat T-cells. CD4/CD8 ratio fell to 9 : 1 (at 13 : 1 and 82 : 1 in 2D- and 3D-controls, respectively) both by CD4+ depletion and by CD8+ cell percent raise. Total amount of cells (TAC) in Jurkat T-cell culture after 24-h contact with CP coating was decreased to 88 % 2D control level (P < 0.04) that could favor to a suppression of cell division. TAC reduction in Jurkat T-cell culture was accompanied by accelerated IL-8 spontaneous secretion (r = –0.97, P < 0.00009). For all this, IL-8 induced apoptosis (r = 0.94, P < 0.0001) in low concentrations (pg/ml). The obtained result is the feature of Jurkat T-cells reaction on CP but not TiO2 coatings, and it may be used in case of materials selection for endoprosthesis replacement and fracture osteosynthesis in patients suffering by hematological and bone malignancies.

The morphology and immunophenotype of female colostrum adherent cells with the help of CD3, CD31, CD34, CD45, CD68, vimentin, and osteocalcin antibodies panel was studied in short-term (6—7 days) culture in vitro. Approximately equal (1 : 1) ratio of fibroblast-like and rounded cells was observed in 20 % of cultural flasks. The cells with regular shape mixed with single fibroblasts were noted in 80 % of cultural flasks. The diameter of spreaded cells varied within 10—100 mm. All cells adhered to plastics did not express CD3 and interacted slightly (sl) with antibodies to CD31, CD34, and CD45. At the same time, adherent cells with intensive CD68, vimentin and osteocalcin staining have been revealed. Literature data allows to interpret CD68+CD3–CD31slCD34slCD45sl immunophenotype of significant part of mother colostrum adherent cells as belonging to monocyte-macrophage lineage. Marked expression of stromal antigens (vimentin, osteocalcin) in 40—45 % adherent cells in cultural medium without osteogenic supplements (beta-glycerophosphate, ascorbic acid, dexamethasone) proposes an existence of osteoblasts fraction differentiated in colostrum from mesenchymal stem cells under an action of breast milk humoral factors.

A solution blow spinning technique is a method developed recently for making nonwoven webs of micro- and nanofibres. The principal advantage of this method compared to a more traditional electrospinning process is its significantly higher production rate. In this work, the solution blow spinning method was further developed to produce nonwoven polymeric scaffolds based on a copolymer of tetrafluoroethylene with vinylidene fluoride solution in acetone. A crucial feature of the proposed method is that high-voltage equipment is not required, which further improves the method's economics. Scanning electron microscopy analysis of the samples demonstrated that the surface morphology of the nonwoven materials is dependent on the polymer concentration in the spinning solution. It was concluded that an optimum morphology of the nonwoven scaffolds for medical applications is achieved by using a 5% solution of the copolymer. It was established that the scaffolds produced from the 5% solution have a fractal structure and anisotropic mechanical properties. X-ray diffraction, infrared spectroscopy, Raman spectroscopy and differential scanning calorimetry demonstrated that the fabricated nonwoven materials have crystal structures that exhibit ferroelectric properties. Gas chromatography has shown that the amount of acetone in the nonwoven material does not exceed the maximum allowable concentration of 0.5%. In vitro analysis, using the culture of motile cells, confirmed that the nonwoven material is non-toxic and does not alter the morpho-functional status of stem cells for short-term cultivation, and therefore can potentially be used in medical applications., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Strontium ranelate (29 μg/ml) and ibandronic acid (50 μM) produced a cytotoxic effect on rat bone marrow myelokaryocytes in vitro. Strontium ranelate increased the number of myelokaryocytes with signs of necrosis, ibandronic acid increased the number of apoptotic and necrotic cells in the 9-day 2D culture of bone marrow cells on the plastic surface of the wells of culture plates. Co-culturing of the bone marrow with 3D matrices with microarc calcium phosphate coating that simulated bone mineral matrix increased intracellular ROS concentration, but abolished the cytotoxic effect of these drugs.

Bisphosphonates are chemical analogs of isoprene lipids, which competitively decrease the activity of farnesyl diphosphate synthase in osteoclasts and thus retard prenylation. The non-prenylated small GTPases cannot attach to the membrane of osteoclasts, which decreases their resorptive function and accelerates apoptosis. Strontium ranelate activates the Wnt signal pathway (with participation of calcium-sensitive receptor), increases the replication activity (by changing the function of RANKL/RANK/OPG system) thus suppressing the apoptosis of osteoblasts, and retards the resorptive function by accelerating the apoptosis of osteoclasts.

In review the possibility of biomaterials osseointegration improvement with help of bisphosphonates or strontium ranelate is discussed. For this purpose, they are added to hydroxyapatite used for implants coating, or are included as a component of bulk calcium phosphate materials. Strontium is employed as a compound of biodegradable metal alloys, also. Combined use of carrier (implant) with bisphosphonates or strontium ranelate promotes controlling local delivery of pharmaceutical molecules into lesion, enhances the therapy efficiency, and decreases a dose and systemic toxicity of the drugs. Bisphosphonates and strontium ranelate increase the mass, a count and thickness of bone trabeculas, improve the bone biomechanical properties in the place of implants fixation, and diminish the bone fracture risk. Main studies are devoted to pharmacologic mechanisms of implants osseointegration improvement. Bisphosphonates as isoprenoid lipids chemical analogues diminish by concurrent principle the osteoclastsfarnesylpyrophosphate synthase activity and inhibit the prenylation. Unprenylated small GTPases don't fasten onto osteoclasts membrane that weakens cellular resorptive activity and accelerates their apoptosis. Strontium ranelate enhances osteoblasts replicative activity and suppresses their apoptosis, also retards osteoclasts resorptive function and accelerates their apoptosis. Its effects are conditioned by activating Wnt-signaling pathway by means of calcium-sensing receptor and by changing the RANKL/RANK/OPG system.

Strontium ranelate (SR) effect on the functional parameters of human blood mononuclear leukocytes culture has been investigated. SR in concentrations of 2.9, 29, and 290 mg/ml produces a dose-dependent decrease in the activity of alkaline phosphatase and the content of calcium and potassium ions in supernatants. In concentrations of 2.9 and 29 mg/ml, SR decreases, while in a concentration of 290 mg/ml it increases the intercellular phosphate ion content. Fibroblast- and osteoblast-like cells, which are capable of regulating mineral compound of intercellular liquid, are SR cellular targets in human blood mononuclear leukocytes culture.

Extracellular matrix can regulate multipotent mesenchymal stromal cells (MMSC) differentiation, with potential applications for tissue engineering. A relief of mineralized bone takes essential effect on MMSC fate. Nevertheless, delicate structure and a hierarchy of niches for stromal stem cells and its quantitative parameters are not practically known. Here, we describe the protocol to define the basic approach providing a guiding for in vitro identification of quantitative features of artificial calcium phosphate niches which promotes osteogenic differentiation and maturation of stromal stem cell.

Hemopoietic islets, associations of stromal (macrophages, fibroblasts) and blood (including stem) cells, are structural and functional units of the bone marrow. We studied cellular and molecular processes developing following short-term (1 h) contact of hemopoietic islets with ferromagnetic nanoparticles in a multicellular system of the bone marrow in vitro. It was established that nanodispersions of magnetite (Fe(3)O(4), mean particle diameter 18 nm) and iron coated with carbon (Fe(C), particle diameter 5-10 nm) in a dose of 3 mg/liter had a minor effect on processes of necrotic and apoptotic cell death. Nanodispersion of carbon-coated iron (Fe(C)) most mildly stimulated oxidizing processes recorded by intracellular levels of reactive oxygen species. These nanoparticles, in contrast to magnetite, did not reduce the amount of hemopoietic islets in the bone marrow cell suspension.

The aim of this research is experimental investigation of the topography and evaluation of some parameters of artificial microterritories promoting osteogenic differentiation of stromal stem cells. A technique of short-term culturing of prenatal human lung stromal cells with fibroblastoid morphology on calcium phosphate substrates with known topography was used. Judging from secretory activity of the cell culture (osteocalcin, alkaline phosphatase), stromal stem cells directly interacting with calcium phosphate discs have advantage in manifestation of osteoblast-like functional activity in comparison with cells cultured on plastic. Rough surfaces of calcium phosphate discs stimulate the formation of spatial human fibroblastoid cell culture. The cells with positive reaction to acid phosphatase are located on spheroliths forming the relief of calcium phosphate coatings. The cells with positive reaction to alkaline phosphatase (marker of osteoblasts) populate hollows (niches) of the artificial surface. The niche for induction of osteogenic differentiation of human multipotent mesenchymal stem cells is apparently a structural and functional formation. It can be characterized by an index calculated as the ratio of the total area occupied by alkaline phosphatase-positive cells to the area of artificial surface occupied by one stained cell.

We studied in vitro effect of ferrimagnetic nanoparticles in a dose of 3 mg/liter (10 maximum permissible concentrations) on colony-forming capacity of bone marrow granulocytic and monocytic precursors in a constant magnetic field at magnetic field intensity of 200 Oe. We tested powders obtained by the methods of electrical explosion of conductors (magnetite and a mixture of hematite with magnetite) or mechanochemical synthesis (cobalt ferrite). According to electron microscopy, size of particles was within 6-65 nm. Specific effect of nanopowders on functional properties of hemopoietic and stromal cells were demonstrated; this effect was not related to dissolution of these powders, but had a complex nature. It depends on the size and magnetic characteristics of powder particles, the route and dose of administration, and the presence of external magnetic field. It was emphasized that in multicellular systems a reaction of committed hemopoietic precursors mediated via cells (factors) of microenvironment cannot be excluded, the state of this system varying in different individuals and under different conditions. Our data open new vistas for the creation and targeted use of nanosized materials and technologies for individual therapy in the context of personalized medicine.

The effects of Xe on cell viability and redox balance in the culture of Wistar rat thymocytes were studied in vitro during 24-h storage under hypothermic conditions. The results indicate that after bubbling of cell suspensions (5 x 10(6) cell/ml, 4 ml medium), the weight of Xe in flasks was 15-43 mg, whereas in cell-free medium no weight increment due to gas accumulation in the system was detected. The content of Xe in cell suspension slightly decreased over 24-h culturing at ambient temperature (by 10% of initial level). Xenon significantly improved cell survival during thermal exposure of all modes. The maximum cytoprotective effect of Xe was observed under rigorous thermal conditions associated with significant cell death without chemical protectors (3 degrees C, -35 degrees C). The effect of Xe was less pronounced at mild temperatures (23-37 degrees C) or in the presence of chemical protectors (-35 degrees C with dimethylsulfoxide). The mechanisms of the effect of the inert gas are determined by its antioxidant or prooxidant action. The capacity of Xe to improve cell survival under hypothermic conditions can be used for the development of new methods for transportation and storage of cell material.

Samples of a hybrid composite of polyhydroxybutyrate (PHB), a biodegradable polyester, and hydroxyapatite (HA), with different PHB/HA ratios, have been prepared using mechanical-physical method. Electron microscopy, X-ray structure analysis and differential thermal analysis have been used to investigate the structure and physicochemical properties of the composite, depending on the PHB/HA ratio. The properties of the surface of the HA-loaded composite are significantly different from those of the pure polymer. As the HA percentage in the composite increases, free interface energy, the cohesive force, i.e., the strength of the adhesive bond between the composite surface and the water phase, and surface wettability increase. The HA percentage of the composite does not influence its melting temperature, but affects the temperature for the onset of decomposition: as the HA content increases from 0 to 10% (w/w), Td decreases from 260 degrees C to 225 degrees C. The degree of crystallinity of PHB/HA increases from 77% to 89% with an increase in the HA fraction from 10% to 50%. Functional properties of the composites have been investigated in vitro and in vivo. The best parameters of growth and differentiation of murine marrow osteoblasts are registered on PHB/HA samples containing 10% and 20% HA. In ectopic bone formation assay it has been proven that the hybrid PHB/HA composites can function as scaffolds and that bone tissue develops on their surface and in pores.

The capacity of mouse bone marrow cells to adhere to calcium phosphate surfaces and form tissue plates depending on the surface relief and solubility was studied in ectopic bone formation test. Calcium phosphate coating of titanium disks, made by the anodic spark (microarch) oxidation in 10% orthophosphoric acid with hydroxyl apatite particles, differed by the structure (thickness of coating, size of pores, and roughness) and solubility (level of in vitro oxidation of 1-week extracts of implants). Chemical (phasic and element) composition of the studied calcium phosphate coatings was virtually the same. The findings indicate that histogenesis is regulated by physicochemical characteristics of the implant surface. It seems that the osteogenic potential of calcium phosphate surfaces is largely determined by their relief, but not by pH of degradation products.

Correlation analysis demonstrated the role of inorganic parameters of the surfaces of calcium phosphate materials in the regulation of osteogenic differentiation of mesenchymal precursors. The progenitor stromal cells were isolated from syngeneic bone marrow immobilized in vitro on calcium phosphate surfaces with different structure, phasic, and elemental composition. After 45 days of subcutaneous ectopic osteogenesis in BALB/c mice, the tissues grown on these matrixes were characterized histologically. It was found that adhesion of bone marrow cells is the initial stage determining their future proliferation (conduction) over the artificial surface and the area of formed tissue plate. The success of histogenesis depends on surface roughness. The optimal roughness class was 4-5 (Russian State Standards), which enables differentiation of progenitor stromal cells under the specific microenvironmental conditions into the connective and adipose tissue cells. Differentiation of the progenitor cells into the stromal cells producing the hemopoiesis-inducing microenvironment also takes place in the foci of active hemopoiesis. Induction of osteogenic potential of the stromal precursors (osteoinduction) is determined by the ratio between calcium and phosphate atoms in surface coatings. In our experimental system, osteogenic differentiation of stromal mechanocytes was blocked only at Ca/P<0.5.

The primary culture of human blood mononuclear cells was incubated on fibrous membranes under a constant directional flow of the nutrient medium modulating intraocular fluid flow. Incubation was performed for 24, 48, and 72 h. Intracellular enzyme activity of mononuclear cells increased under dynamic conditions. Differentiation of blood monocytes and circulating fibroblast precursors into macrophageal cells and mature cells, respectively, was accelerated.

Biological activity of eight hydroxyapatite powders synthesized by the mechanochemical method was studied in vitro. Introduction of copper and zinc atoms into synthetic hydroxyapatite structure promotes cell adhesion. Hydroxyapatites obtained by the mechanochemical method are promising base for a new class of materials and coatings with regulated bioactivity for orthopedics and traumatology.