Search

The contribution of the magnetic field to the formation of high-mass stars is poorly understood. We report the high-angular resolution ($\sim0.3^{\prime\prime}$, 870 au) map of the magnetic field projected on the plane of the sky (B$_\mathrm{POS}$) towards the high-mass star forming region G333.46$-$0.16 (G333), obtained with the Atacama Large Millimeter/submillimeter Array (ALMA) at 1.2 mm as part of the Magnetic Fields in Massive Star-forming Regions (MagMaR) survey. The B$_\mathrm{POS}$ morphology found in this region is consistent with a canonical ``hourglass'' which suggest a dynamically important field. This region is fragmented into two protostars separated by $\sim1740$ au. Interestingly, by analysing H$^{13}$CO$^{+}$ ($J=3-2$) line emission, we find no velocity gradient over the extend of the continuum which is consistent with a strong field. We model the B$_\mathrm{POS}$, obtaining a marginally supercritical mass-to-flux ratio of 1.43, suggesting an initially strongly magnetized environment. Based on the Davis-Chandrasekhar-Fermi method, the magnetic field strength towards G333 is estimated to be 5.7 mG. The absence of strong rotation and outflows towards the central region of G333 suggests strong magnetic braking, consistent with a highly magnetized environment. Our study shows that despite being a strong regulator, the magnetic energy fails to prevent the process of fragmentation, as revealed by the formation of the two protostars in the central region.

We report on ALMA observations of polarized dust emission at 1.2 mm from NGC6334I, a source known for its significant flux outbursts. Between five months, our data show no substantial change in total intensity and a modest 8\% variation in linear polarization, suggesting a phase of stability or the conclusion of the outburst. The magnetic field, inferred from this polarized emission, displays a predominantly radial pattern from North-West to South-East with intricate disturbances across major cores, hinting at spiral structures. Energy analysis of CS$(J=5 \rightarrow 4)$ emission yields an outflow energy of approximately $3.5\times10^{45}$ ergs, aligning with previous interferometric studies. Utilizing the Davis-Chandrasekhar-Fermi method, we determined magnetic field strengths ranging from 1 to 11 mG, averaging at 1.9 mG. This average increases to 4 $\pm 1$ mG when incorporating Zeeman measurements. Comparative analyses using gravitational, thermal, and kinetic energy maps reveal that magnetic energy is significantly weaker, possibly explaining the observed field morphology. We also find that the energy in the outflows and the expanding cometary {\HII} region is also larger than the magnetic energy, suggesting that protostellar feedback maybe the dominant driver behind the injection of turbulence in NGC6334I at the scales sampled by our data. The gas in NGC6334I predominantly exhibits supersonic and trans-Alfvenic conditions, transitioning towards a super-Alfvenic regime, underscoring a diminished influence of the magnetic field with increasing gas density. These observations are in agreement with prior polarization studies at 220 GHz, enriching our understanding of the dynamic processes in high-mass star-forming regions., Comment: Accepted for Publication at the Astrophysical Journal

We report 850 $\mu$m continuum polarization observations toward the filamentary high-mass star-forming region NGC 2264, taken as part of the B-fields In STar forming Regions Observations (BISTRO) large program on the James Clerk Maxwell Telescope (JCMT). These data reveal a well-structured non-uniform magnetic field in the NGC 2264C and 2264D regions with a prevailing orientation around 30 deg from north to east. Field strengths estimates and a virial analysis for the major clumps indicate that NGC 2264C is globally dominated by gravity while in 2264D magnetic, gravitational, and kinetic energies are roughly balanced. We present an analysis scheme that utilizes the locally resolved magnetic field structures, together with the locally measured gravitational vector field and the extracted filamentary network. From this, we infer statistical trends showing that this network consists of two main groups of filaments oriented approximately perpendicular to one another. Additionally, gravity shows one dominating converging direction that is roughly perpendicular to one of the filament orientations, which is suggestive of mass accretion along this direction. Beyond these statistical trends, we identify two types of filaments. The type-I filament is perpendicular to the magnetic field with local gravity transitioning from parallel to perpendicular to the magnetic field from the outside to the filament ridge. The type-II filament is parallel to the magnetic field and local gravity. We interpret these two types of filaments as originating from the competition between radial collapsing, driven by filament self-gravity, and the longitudinal collapsing, driven by the region's global gravity., Comment: Accepted for publication in the Astrophysical Journal. 43 pages, 32 figures, and 4 tables (including Appendix)

We address a challenging lifelong few-shot image generation task for the first time. In this situation, a generative model learns a sequence of tasks using only a few samples per task. Consequently, the learned model encounters both catastrophic forgetting and overfitting problems at a time. Existing studies on lifelong GANs have proposed modulation-based methods to prevent catastrophic forgetting. However, they require considerable additional parameters and cannot generate high-fidelity and diverse images from limited data. On the other hand, the existing few-shot GANs suffer from severe catastrophic forgetting when learning multiple tasks. To alleviate these issues, we propose a framework called Lifelong Few-Shot GAN (LFS-GAN) that can generate high-quality and diverse images in lifelong few-shot image generation task. Our proposed framework learns each task using an efficient task-specific modulator - Learnable Factorized Tensor (LeFT). LeFT is rank-constrained and has a rich representation ability due to its unique reconstruction technique. Furthermore, we propose a novel mode seeking loss to improve the diversity of our model in low-data circumstances. Extensive experiments demonstrate that the proposed LFS-GAN can generate high-fidelity and diverse images without any forgetting and mode collapse in various domains, achieving state-of-the-art in lifelong few-shot image generation task. Surprisingly, we find that our LFS-GAN even outperforms the existing few-shot GANs in the few-shot image generation task. The code is available at Github., Comment: 20 pages, 19 figures, 14 tables, ICCV 2023 Poster

We report the detection of the millimeter CH$_3$OH masers including a new detection of class I (11$_{0,11}$-10$_{1,10}$A) and class II (6$_{1,5}$-5$_{2,4}$E) maser transitions toward the high-mass protostar S255IR NIRS3 in post-burst phase. The CH$_3$OH emissions were detected as a mixture of maser and thermal characteristics. We examine the detected transitions using an excitation diagram and LTE model spectra and compare the observed properties with those of thermal lines. Class II CH$_3$OH maser transitions showed distinctive intensity and velocity distributions from those of thermal transitions. Bright distinct emission components in addition to the fragmented and arc-shaped emissions are only detected in class I CH$_3$OH maser transitions toward southern and western directions from the protostellar position, implying the presence of the slow outflow shocks., Comment: 9 pages, 4 Figures, 1 Table, Accepted for publication in ApJL

We present observations of polarized dust emission at 850 $\mu$m from the L43 molecular cloud which sits in the Ophiuchus cloud complex. The data were taken using SCUBA-2/POL-2 on the James Clerk Maxwell Telescope as a part of the BISTRO large program. L43 is a dense ($N_{\rm H_2}\sim 10^{22}$-10$^{23}$ cm$^{-2}$) complex molecular cloud with a submillimetre-bright starless core and two protostellar sources. There appears to be an evolutionary gradient along the isolated filament that L43 is embedded within, with the most evolved source closest to the Sco OB2 association. One of the protostars drives a CO outflow that has created a cavity to the southeast. We see a magnetic field that appears to be aligned with the cavity walls of the outflow, suggesting interaction with the outflow. We also find a magnetic field strength of up to $\sim$160$\pm$30 $\mu$G in the main starless core and up to $\sim$90$\pm$40 $\mu$G in the more diffuse, extended region. These field strengths give magnetically super- and sub-critical values respectively and both are found to be roughly trans-Alfv\'enic. We also present a new method of data reduction for these denser but fainter objects like starless cores., Comment: Accepted for publication in ApJ. 23 pages, 9 figures (7 main text, 2 appendix)

We present BISTRO Survey 850 {\mu}m dust emission polarisation observations of the L1495A-B10 region of the Taurus molecular cloud, taken at the JCMT. We observe a roughly triangular network of dense filaments. We detect 9 of the dense starless cores embedded within these filaments in polarisation, finding that the plane-of-sky orientation of the core-scale magnetic field lies roughly perpendicular to the filaments in almost all cases. We also find that the large-scale magnetic field orientation measured by Planck is not correlated with any of the core or filament structures, except in the case of the lowest-density core. We propose a scenario for early prestellar evolution that is both an extension to, and consistent with, previous models, introducing an additional evolutionary transitional stage between field-dominated and matter-dominated evolution, observed here for the first time. In this scenario, the cloud collapses first to a sheet-like structure. Uniquely, we appear to be seeing this sheet almost face-on. The sheet fragments into filaments, which in turn form cores. However, the material must reach a certain critical density before the evolution changes from being field-dominated to being matter-dominated. We measure the sheet surface density and the magnetic field strength at that transition for the first time and show consistency with an analytical prediction that had previously gone untested for over 50 years (Mestel 1965)., Comment: 14 pages, 5 figures. ApJ accepted

We study the HII regions associated with the NGC 6334 molecular cloud observed in the sub-millimeter and taken as part of the B-fields In STar-forming Region Observations (BISTRO) Survey. In particular, we investigate the polarization patterns and magnetic field morphologies associated with these HII regions. Through polarization pattern and pressure calculation analyses, several of these bubbles indicate that the gas and magnetic field lines have been pushed away from the bubble, toward an almost tangential (to the bubble) magnetic field morphology. In the densest part of NGC 6334, where the magnetic field morphology is similar to an hourglass, the polarization observations do not exhibit observable impact from HII regions. We detect two nested radial polarization patterns in a bubble to the south of NGC 6334 that correspond to the previously observed bipolar structure in this bubble. Finally, using the results of this study, we present steps (incorporating computer vision; circular Hough Transform) that can be used in future studies to identify bubbles that have physically impacted magnetic field lines., Comment: Accepted for publication in Astrophysical Journal (ApJ)

We present 850 $\mu$m dust polarization observations of the massive DR21 filament from the B-fields In STar-forming Region Observations (BISTRO) survey, using the POL-2 polarimeter and the SCUBA-2 camera on the James Clerk Maxwell Telescope. We detect ordered magnetic fields perpendicular to the parsec-scale ridge of the DR21 main filament. In the sub-filaments, the magnetic fields are mainly parallel to the filamentary structures and smoothly connect to the magnetic fields of the main filament. We compare the POL-2 and Planck dust polarization observations to study the magnetic field structures of the DR21 filament on 0.1--10 pc scales. The magnetic fields revealed in the Planck data are well aligned with those of the POL-2 data, indicating a smooth variation of magnetic fields from large to small scales. The plane-of-sky magnetic field strengths derived from angular dispersion functions of dust polarization are 0.6--1.0 mG in the DR21 filament and $\sim$ 0.1 mG in the surrounding ambient gas. The mass-to-flux ratios are found to be magnetically supercritical in the filament and slightly subcritical to nearly critical in the ambient gas. The alignment between column density structures and magnetic fields changes from random alignment in the low-density ambient gas probed by Planck to mostly perpendicular in the high-density main filament probed by JCMT. The magnetic field structures of the DR21 filament are in agreement with MHD simulations of a strongly magnetized medium, suggesting that magnetic fields play an important role in shaping the DR21 main filament and sub-filaments., Comment: 26 pages, 13 figures, ApJ accepted

We present and analyze observations of polarized dust emission at 850 $\mu$m towards the central 1 pc $\times$ 1 pc hub-filament structure of Monoceros R2 (Mon R2). The data are obtained with SCUBA-2/POL-2 on the James Clerk Maxwell Telescope (JCMT) as part of the BISTRO (B-fields in Star-forming Region Observations) survey. The orientations of the magnetic field follow the spiral structure of Mon R2, which are well-described by an axisymmetric magnetic field model. We estimate the turbulent component of the magnetic field using the angle difference between our observations and the best-fit model of the underlying large-scale mean magnetic field. This estimate is used to calculate the magnetic field strength using the Davis-Chandrasekhar-Fermi method, for which we also obtain the distribution of volume density and velocity dispersion using a column density map derived from $Herschel$ data and the C$^{18}$O ($J$ = 3-2) data taken with HARP on the JCMT, respectively. We make maps of magnetic field strengths and mass-to-flux ratios, finding that magnetic field strengths vary from 0.02 to 3.64 mG with a mean value of 1.0 $\pm$ 0.06 mG, and the mean critical mass-to-flux ratio is 0.47 $\pm$ 0.02. Additionally, the mean Alfv\'en Mach number is 0.35 $\pm$ 0.01. This suggests that in Mon R2, magnetic fields provide resistance against large-scale gravitational collapse, and magnetic pressure exceeds turbulent pressure. We also investigate the properties of each filament in Mon R2. Most of the filaments are aligned along the magnetic field direction and are magnetically sub-critical., Comment: This paper is accepted to the ApJ

The quality of quantum bits (qubits) in silicon is highly vulnerable to charge noise that is omni-present in semiconductor devices and is in principle hard to be suppressed. For a realistically sized quantum dot system based on a silicon-germanium heterostructure whose confinement is manipulated with electrical biases imposed on top electrodes, we computationally explore the noise-robustness of 2-qubit entangling operations with a focus on the controlled-X (CNOT) logic that is essential for designs of gate-based universal quantum logic circuits. With device simulations based on the physics of bulk semiconductors augmented with electronic structure calculations, we not only quantify the degradation in fidelity of single-step CNOT operations with respect to the strength of charge noise, but also discuss a strategy of device engineering that can significantly enhance noise-robustness of CNOT operations with almost no sacrifice of speed compared to the single-step case. Details of device designs and controls that this work presents can establish a rare but practical guideline for potential efforts to secure silicon-based quantum processors using an electrode-driven quantum dot platform., Comment: 23 pages, 6 figures

We present 850 $\mu$m polarimetric observations toward the Serpens Main molecular cloud obtained using the POL-2 polarimeter on the James Clerk Maxwell Telescope (JCMT) as part of the B-fields In STar-forming Region Observations (BISTRO) survey. These observations probe the magnetic field morphology of the Serpens Main molecular cloud on about 6000 au scales, which consists of cores and six filaments with different physical properties such as density and star formation activity. Using the histogram of relative orientation (HRO) technique, we find that magnetic fields are parallel to filaments in less dense filamentary structures where $N_{H_2} < 0.93\times 10^{22}$ cm$^{-2}$ (magnetic fields perpendicular to density gradients), while being perpendicular to filaments (magnetic fields parallel to density gradients) in dense filamentary structures with star formation activity. Moreover, applying the HRO technique to denser core regions, we find that magnetic field orientations change to become perpendicular to density gradients again at $N_{H_2} \approx 4.6 \times 10^{22}$ cm$^{-2}$. This can be interpreted as a signature of core formation. At $N_{H_2} \approx 16 \times 10^{22}$ cm$^{-2}$ magnetic fields change back to being parallel to density gradients once again, which can be understood to be due to magnetic fields being dragged in by infalling material. In addition, we estimate the magnetic field strengths of the filaments ($B_{POS} = 60-300~\mu$G)) using the Davis-Chandrasekhar-Fermi method and discuss whether the filaments are gravitationally unstable based on magnetic field and turbulence energy densities., Comment: 18 pages, accepted for publication in ApJ

We present the results of simultaneous 450 $\mu$m and 850 $\mu$m polarization observations toward the massive star forming region NGC 2071IR, a target of the BISTRO (B-fields in Star-Forming Region Observations) Survey, using the POL-2 polarimeter and SCUBA-2 camera mounted on the James Clerk Maxwell Telescope. We find a pinched magnetic field morphology in the central dense core region, which could be due to a rotating toroidal disk-like structure and a bipolar outflow originating from the central young stellar object, IRS 3. Using the modified Davis-Chandrasekhar-Fermi method, we obtain a plane-of-sky magnetic field strength of 563$\pm$421 $\mu$G in the central $\sim$0.12 pc region from 850 $\mu$m polarization data. The corresponding magnetic energy density of 2.04$\times$10$^{-8}$ erg cm$^{-3}$ is comparable to the turbulent and gravitational energy densities in the region. We find that the magnetic field direction is very well aligned with the whole of the IRS 3 bipolar outflow structure. We find that the median value of polarization fractions, 3.0 \%, at 450 $\mu$m in the central 3 arcminute region, which is larger than the median value of 1.2 \% at 850 $\mu$m. The trend could be due to the better alignment of warmer dust in the strong radiation environment. We also find that polarization fractions decrease with intensity at both wavelengths, with slopes, determined by fitting a Rician noise model, of $0.59 \pm 0.03$ at 450 $\mu$m and $0.36 \pm 0.04$ at 850 $\mu$m, respectively. We think that the shallow slope at 850 $\mu$m is due to grain alignment at the center being assisted by strong radiation from the central young stellar objects., Comment: 17 pages, 11 figures, 4 tables

Self-folding origami, structures that are engineered flat to fold into targeted, three-dimensional shapes, have many potential engineering applications. Though significant effort in recent years has been devoted to designing fold patterns that can achieve a variety of target shapes, recent work has also made clear that many origami structures exhibit multiple folding pathways, with a proliferation of geometric folding pathways as the origami structure becomes complex. The competition between these pathways can lead to structures that are programmed for one shape, yet fold incorrectly. To disentangle the features that lead to misfolding, we introduce a model of self-folding origami that accounts for the finite stretching rigidity of the origami faces and allows the computation of energy landscapes that lead to misfolding. We find that, in addition to the geometrical features of the origami, the finite elasticity of the nearly-flat origami configurations regulates the proliferation of potential misfolded states through a series of saddle-node bifurcations. We apply our model to one of the most common origami motifs, the symmetric "bird's foot," a single vertex with four folds. We show that though even a small error in programmed fold angles induces metastability in rigid origami, elasticity allows one to tune resilience to misfolding. In a more complex design, the "Randlett flapping bird," which has thousands of potential competing states, we further show that the number of actual observed minima is strongly determined by the structure's elasticity. In general, we show that elastic origami with both stiffer folds and stiffer faces self-folds better.