Search

Breast carcinoma is highly metastatic and invasive. Tumor metastasis is a convoluted and multistep process involving tumor cell disseminating from their primary site and migrating to the secondary organ. Epithelial-mesenchymal transition (EMT) is one of the crucial steps that initiate cell progression, invasion, and metastasis. During EMT, epithelial cells alter their molecular features and acquire a mesenchymal phenotype. The regulation of EMT is centered by several signaling pathways, including primary mediators TGF-β, Notch, Wnt, TNF-α, Hedgehog, and RTKs. It is also affected by hypoxia and microRNAs (miRNAs). All these pathways are the convergence on the transcriptional factors such as Snail, Slug, Twist, and ZEB1/2. In addition, a line of evidence suggested that EMT and cancer stem like cells (CSCs) are associated. EMT associated cancer stem cells display mesenchymal phenotypes and resist to chemotherapy or targeted therapy. In this review, we highlighted recent discoveries in these signaling pathways and their regulation in breast cancer metastasis and invasion. While the clinical relevance of EMT and breast cancers remains controversial, we speculated a convergent signaling network pivotal to elucidating the transition of epithelial to mesenchymal phenotypes and onset of metastasis of breast cancer cells.

Animal models have been extensively used in cancer pathology studies and drug discovery. These models, however, fail to reflect the complex human tumor microenvironment and do not allow for high-throughput drug screening in more human-like physiological conditions. Three-dimensional (3D) cancer models present an alternative to automated high-throughput cancer drug discovery and oncology. In this review, we highlight recent technology innovations in building 3D tumor models that simulate the complex human tumor microenvironment and responses of patients to treatment. We discussed various biofabrication technologies, including 3D bioprinting techniques developed for characterizing tumor progression, metastasis, and response to treatment.

The ongoing COVID-19 global pandemic has necessitated evaluating various disinfection technologies for reducing viral transmission in public settings. Ultraviolet (UV) radiation can inactivate pathogens and viruses but more insight is needed into the performance of different UV wavelengths and their applications. We observed greater than a 3-log reduction of SARS-CoV-2 infectivity with a dose of 12.5 mJ/cm2 of 254 nm UV light when the viruses were suspended in PBS, while a dose of 25 mJ/cm2 was necessary to achieve a similar reduction when they were in an EMEM culture medium containing 2%(v/v) FBS, highlighting the critical effect of media in which the virus is suspended, given that SARS-CoV-2 is always aerosolized when airborne or deposited on a surface. It was found that SARS-CoV-2 susceptibility (a measure of the effectiveness of the UV light) in a buffer such as PBS was 4.4-fold greater than that in a cell culture medium. Furthermore, we discovered the attenuation of UVC disinfection by amino acids, vitamins, and niacinamide, highlighting the importance of determining UVC dosages under a condition close to aerosols that wrap the viruses. We developed a disinfection model to determine the effect of the environment on UVC effectiveness with three different wavelengths, 222 nm, 254 nm, and 265 nm. An inverse correlation between the liquid absorbance and the viral susceptibility was observed. We found that 222 nm light was most effective at reducing viral infectivity in low absorbing liquids such as PBS, whereas 265 nm light was most effective in high absorbing liquids such as cell culture medium. Viral susceptibility was further decreased in N95 masks with 222 nm light being the most effective. The safety of 222 nm was also studied. We detected changes to the mechanical properties of the stratum corneum of human skins when the 222 nm accumulative exposure exceeded 50 J/cm2.The findings highlight the need to evaluate each UV for a given application, as well as limiting the dose to the lowest dose necessary to avoid unnecessary exposure to the public.

Regenerating human islet organoids from stem cells remains a significant challenge because of our limited knowledge on cues essential for developing the endocrine organoids in vitro. In this study, we discovered that a natural material prepared from a decellularized rat pancreatic extracellular matrix (dpECM) induces the self-assembly of human islet organoids during induced pluripotent stem cell (iPSC) pancreatic differentiation. For the first time, we demonstrated that the iPSC-derived islet organoids formed in the presence of the dpECM are capable of glucose-responsive secretion of both insulin and glucagon, two major hormones that maintain blood glucose homeostasis. The characterization of the organoids revealed that the organoids consisted of all major endocrine cell types, including α, β, δ, and pancreatic polypeptide cells, that were assembled into a tissue architecture similar to that of human islets. The exposure of iPSCs to the dpECM during differentiation resulted in considerably elevated expression of key pancreatic transcription factors such as PDX-1, MAFA, and NKX6.1 and the production of all major hormones, including insulin, glucagon, somatostatin, and pancreatic polypeptide from stem cell-derived organoids. This study highlights the importance of natural, bioactive biomaterials for building microenvironments crucial to regenerating islet organoids from stem cells.

Tumors can escape from the immune system by overexpressing CD47 and other checkpoint blockades. CD47 is expressed ubiquitously by all cells in the body, posing an obstacle for CD47 blocking treatments due to their systemic toxicity. We performed a study to determine how the tumor microenvironment changes after vaccination with genome edited CD47−/− syngeneic tumor cells. We discovered that inactivated CD47-depleted mouse melanoma cells can protect mice from melanoma. Our animal study indicated that 33% of vaccinated mice remained tumor-free, and 100% of mice had 5-fold reduced growth rates. The characterization of immunomodulatory effects of the vaccine revealed a highly anti-tumorigenic and homogenous microenvironment after vaccination. We observed consistently that in the tumors that failed to respond to vaccines, there were reduced natural killer cells, elevated regulatory T cells, M2-type macrophages, and high PD-L1 expression in these cells. These observations suggested that the tumor microenvironments became more suppressive to tumor growth after vaccination, suggesting a potential new immunotherapy for solid tumors.

Tissue microenvironments are rich in signaling molecules. However, factors in the tissue matrix that can serve as tissue-specific cues for engineering pancreatic tissues have not been thoroughly identified. In this study, we performed a comprehensive proteomic analysis of porcine decellularized pancreatic extracellular matrix (dpECM). By profiling dpECM collected from subjects of different ages and genders, we showed that the detergent-free decellularization method developed in this study permits the preservation of approximately 62.4% more proteins than a detergent-based method. In addition, we demonstrated that dpECM prepared from young pigs contained approximately 68.5% more extracellular matrix proteins than those prepared from adult pigs. Furthermore, we categorized dpECM proteins by biological process, molecular function, and cellular component through gene ontology analysis. Our study results also suggested that the protein composition of dpECM is significantly different between male and female animals while a KEGG enrichment pathway analysis revealed that dpECM protein profiling varies significantly depending on age. This study provides the proteome of pancreatic decellularized ECM in different animal ages and genders, which will help identify the bioactive molecules that are pivotal in creating tissue-specific cues for engineering tissues in vitro.

In vitro differentiation of human induced pluripotent stem cells (iPSCs) into functional islets holds immense potential to create an unlimited source of islets for diabetes research and treatment. A continuous challenge in this field is to generate glucose-responsive mature islets. We herein report a previously undiscovered angiopoietin signal for in vitro islet development. We revealed, for the first time, that angiopoietins, including angiopoietin-1 (Ang1) and angiopoietin-2 (Ang2) permit the generation of islets from iPSCs with elevated glucose responsiveness, a hallmark of mature islets. Angiopoietin-stimulated islets exhibited glucose synchronized calcium ion influx in repetitive glucose challenges. Moreover, Ang2 augmented the expression of all islet hormones, including insulin, glucagon, somatostatin, and pancreatic polypeptide; and β cell transcription factors, including NKX6.1, MAFA, UCN3, and PDX1. Furthermore, we showed that the Ang2 stimulated islets were able to regulate insulin exocytosis through actin-filament polymerization and depolymerization upon glucose challenge, presumably through the CDC42-RAC1-gelsolin mediated insulin secretion signaling pathway. We also discovered the formation of endothelium within the islets under Ang2 stimulation. These results strongly suggest that angiopoietin acts as a signaling molecule to endorse in vitro islet development from iPSCs.

This position paper assesses state-of-the-art advanced biomanufacturing and identifies paths forward to advance this emerging field in biotechnology and biomedical engineering, including new research opportunities and translational and corporate activities. The vision for the field is to see advanced biomanufacturing emerge as a discipline in academic and industrial communities as well as a technological opportunity to spur research and industry growth. To navigate this vision, the paths to move forward and to identify major barriers were a focal point of discussions at a National Science Foundation-sponsored workshop focused on the topic. Some of the major needs include but are not limited to the integration of specific scientific and engineering disciplines and guidance from regulatory agencies, infrastructure requirements, and strategies for reliable systems integration. Some of the recommendations, major targets, and opportunities were also outlined, including some "grand challenges" to spur interest and progress in the field based on the participants at the workshop. Many of these recommendations have been expanded, materialized, and adopted by the field. For instance, the formation of an initial collaboration network in the community was established. This report provides suggestions for the opportunities and challenges to help move the field of advanced biomanufacturing forward. The field is in the early stages of effecting science and technology in biomanufacturing with a bright and important future impact evident based on the rapid scientific advances in recent years and industry progress.

Tumors can escape from the immune system by overexpressing CD47 and other checkpoint blockades. CD47 is expressed ubiquitously by all cells in the body, posing an obstacle for CD47 blocking treatments due to their systemic toxicity. We performed a study to determine how the tumor microenvironment changes after vaccination with genome edited CD47−/− syngeneic tumor cells. We discovered that inactivated CD47-depleted mouse melanoma cells can protect mice from melanoma. Our animal study indicated that 33% of vaccinated mice remained tumor-free, and 100% of mice had 5-fold reduced growth rates. The characterization of immunomodulatory effects of the vaccine revealed a highly anti-tumorigenic and homogenous microenvironment after vaccination. We observed consistently that in the tumors that failed to respond to vaccines, there were reduced natural killer cells, elevated regulatory T cells, M2-type macrophages, and high PD-L1 expression in these cells. These observations suggested that the tumor microenvironments became more suppressive to tumor growth after vaccination, suggesting a potential new immunotherapy for solid tumors.

3D bioprinted vascular constructs have gained increased interest due to their significant potential for creating customizable alternatives to autologous vessel grafts. In this study, we developed a new approach for biofabricating fibrin-based vascular constructs using a novel rotary 3D bioprinter developed in our lab. We formulated a new bioink by incorporating fibrinogen with gelatin to achieve a desired shear-thinning property for rotary bioprinting. The blending of heat-treated gelatin with fibrinogen turned unprintable fibrinogen into a printable biomaterial for vessel bioprinting by leveraging the favorable rheological properties of gelatin. We discovered that the heat-treatment of gelatin remarkably affects the rheological properties of a gelatin-fibrinogen blended bioink, which in turn influences the printability of the ink. Further characterizations revealed that not only concentration of the gelatin but the heat treatment also affects cell viability during printing. Notably, the density of cells included in the bioinks also influenced printability and tissue volumetric changes of the printed vessel constructs during cultures. We observed increased collagen deposition and construct mechanical strength during two months of the cultures. The burst pressure of the vessel constructs reached 1110 mmHg, which is about 52% of the value of the human saphenous vein. An analysis of the tensile mechanical properties of the printed vessel constructs unveiled an increase in both the circumferential and axial elastic moduli during cultures. This study highlights important considerations for bioink formulation when bioprinting vessel constructs. Statement of Significance There has been an increased demand for small-diameter tissue-engineered vascular grafts. Vascular 3D bioprinting holds the potential to create equivalent vascular grafts but with the ability to tailor them to meet patient’s needs. Here, we presented a new and innovative 3D rotary bioprinter and a new bioink formulation for printing vascular constructs using fibrinogen, a favorable biomaterial for vascular tissue engineering. The bioink was formulated by blending fibrinogen with a more printable biomaterial, gelatin. The systematic characterization of the effects of heat treatment and gelatin concentration as well as bioink cell concentration on the printability of the bioink offers new insight into the development of printable biomaterials for tissue biofabrication.

Background: COVID-19 has been declared a global public health emergency, posing a serious threat to the life and health of the general public. So the aim of this study is to investigate the ability of plague prevention of residents about COVID-19 in the normalization stage of epidemic prevention and control in China, thereby providing reference information for relevant institutions to formulate targeted health education measures. Methods: We designed the KAP for COVID-19 Prevention and Control questionnaire partly based on the COVID-19 prevention and control guidelines published by the National Health Commission of China. The questionnaire was distributed through the Questionnaire Star online survey platform between June 28 and June 31, 2020. Convenience and snowball sampling methods were used to collect data. The questionnaire link was first sent to subjects through online social platforms such as WeChat and QQ, where they were invited to send the link to their families, colleagues, and friends. Results: The survey involved 314 members of the public. Questionnaire scores were 9.90±1.967 (range: 0~14), 22.97±2.90 (range: 5~25), and 37.64±5.30 (range: 9~45) for participant COVID-19 prevention and control knowledge, attitude and practice, respectively. More than 80% of the participants had good knowledge of the core symptoms, incubation and isolation periods, and three major preventive measures of COVID-19, but only 31.8% of them answered correctly on the main transmission routes of COVID-19. There were errors when they were asked about the treatment measures, with 27.7% of participants believing that using Vedicilin (an oral antiviral liquid) and gargling brackish water can prevent COVID-19. More than 95% of participants believed that the normalization stage of epidemic prevention still requires personal protective measures. Of the participants, 60~64% were able to perform basic preventive behaviors such as wearing a mask when going out, washing hands at home, and going out less frequently, 52.6% could always comply with cough etiquette, and 40.8% could always follow the seven-step hand washing method. Conclusions: During the normalization stage of the COVID-19 plague prevention, the public had incomplete knowledge on latest prevention strategies Although belief was evident, behavioral compliance still needs to be improved. Relevant government departments or medical institutions need to relay relevant knowledge to those in blind spots, and to guide the public to maintain participation in effective and science-based prevention of the novel coronavirus.

International audience; Hierarchical processes spanning several orders of magnitude of both space and time underlie nearly all cancers. Multi-scale statistical, mathematical, and computational modeling methods are central to designing, implementing and assessing treatment strategies that account for these hierarchies. The basic science underlying these modeling efforts is maturing into a new discipline that is close to influencing and facilitating clinical successes. The purpose of this review is to capture the state-of-the-art as well as the key barriers to success for multi-scale modeling in clinical oncol- ogy. We begin with a summary of the long-envisioned promise of multi-scale modeling in clinical oncology, including the synthesis of disparate data types into models that reveal underlying mechanisms and allow for experimental testing of hypotheses. We then evaluate the mathematical techniques employed most widely and present several examples illustrat- ing their application as well as the current gap between pre- clinical and clinical applications. We conclude with a discus- sion of what we view to be the key challenges and opportunities for multi-scale modeling in clinical oncology.

In pancreatic tissue engineering, generating human pancreatic islet organoids from stem cells has been challenging dfigue mainly to a poor understanding of niches required for multicellular tissue self-assembly in vitro. In this study, we aimed to identify bioactive, chemically defined niches from natural, biological materials for islet development in vitro. We investigated the proteomics of decellularized rat pancreatic extracellular matrix (dpECM) hydrogel using advanced bioinformatics analysis, and identified that type V collagen (ColV) is constantly and abundantly present in dpECM hydrogel. Niches provided to human pluripotent stem cells (iPSCs) by presenting ColV in matrix coating substrates permitted stem cells progression into islet-like organoids that consist of all major pancreatic endocrine cell types, i.e. α, β, δ, and pancreatic polypeptide cells. In the presence of ColV niches, gene expressions of all key pancreatic transcription factors and major hormone genes significantly increased in iPSC-derived organoids. Most importantly, ColV-containing microenvironment resulted in enhanced glucose responsive secretions of both insulin and glucagon hormone from organoids. The study demonstrates that ColV is a critical regulator that augments islet self-assembly from iPSCs, and it is feasible to utilize natural biomaterials to build tissue cues essential for multicellular tissue production in vitro.

We have previously reported that a porous membrane of polyethylene terephthalate (PET) enables significant augmentation of human pluripotent stem cell (hPSC) proliferation and differentiation. The interaction between hPSCs and the PET surface induces &beta, catenin-mediated wingless/integrated (Wnt) signaling, leading to upregulation of the expression of adhesion molecules in hPSCs. In this study, we sought to unveil mechanisms underlying the role of the PET membrane in hPSC self-renewal and metabolism. We discovered that physicochemical cues of the PET membrane considerably alter hPSC metabolism by increasing the cell yield and suppressing the generation of toxic byproduct, indicating an effective cell self-renewal and a less apoptotic culture environment in the membrane culture system. Furthermore, we discovered that a caspase-8 medicated apoptotic pathway plays a profound role in obstructing hPSCs grown on a traditional tissue culture plate (TCP). Treating hPSCs seeded on a TCP surface with a caspase-8 inhibitor significantly suppressed cellular apoptotic pathway and improved cell proliferation and metabolism. Our experimental results provided valuable insights into signal pathways influencing hPSC self-renewal during routine maintenance and expansion, which would shed light on large-scale preparation of hPSCs for clinical applications.

Recent technological breakthroughs in our ability to derive and differentiate induced pluripotent stem cells, organoid biology, organ-on-chip assays, and 3-D bioprinting have all contributed to a heightened interest in the design, assembly, and manufacture of living systems with a broad range of potential uses. This white paper summarizes the state of the emerging field of “multi-cellular engineered living systems,” which are composed of interacting cell populations. Recent accomplishments are described, focusing on current and potential applications, as well as barriers to future advances, and the outlook for longer term benefits and potential ethical issues that need to be considered.

Three-dimensional (3D) bioprinting enables the creation of tissue constructs with heterogeneous compositions and complex architectures. It was initially used for preparing scaffolds for bone tissue engineering. It has recently been adopted to create living tissues, such as cartilage, skin, and heart valve. To facilitate vascularization, hollow channels have been created in the hydrogels by 3D bioprinting. This review discusses the state of the art of the technology, along with a broad range of biomaterials used for 3D bioprinting. It provides an update on recent developments in bioprinting and its applications. 3D bioprinting has profound impacts on biomedical research and industry. It offers a new way to industrialize tissue biofabrication. It has great potential for regenerating tissues and organs to overcome the shortage of organ transplantation.

Success in the differentiating human embryonic stem cells (hESCs) into insulin-secreting β cells raises new hopes for diabetes treatment. In this work, we demonstrated the feasibility of developing islet organoids from hESCs within biomimetic 3D scaffolds. We showed that such a 3D microenvironment is critical to the generation of pancreatic endoderm and endocrine from hESCs. The organoids formed consisted of pancreatic α, β, δ, and pancreatic polypeptide (PP) cells. A high-level co-expression of PDX1, NKX6.1, and NGN3 in these cells suggests the characteristics of pancreatic β cells. More importantly, most insulin-secreting cells generated did not express glucagon, somatostatin, or PP. The expression of mature β cell marker genes such as Pdx1, Ngn3, Insulin, MafA, and Glut2 was detected in these 3D-induced cell clusters. A high-level expression of C-peptide confirmed the de novo endogenous insulin production in these 3D induced cells. Insulin-secretory granules, an indication of β cell maturity, were detected in these cells as well. Glucose challenging experiments suggested that these cells are sensitive to glucose levels due to their elevated maturity. Exposing the cells to a high concentration of glucose induced a sharp increase in insulin secretion.

Cancer recurrence and metastasis accounts for approximately 90% of cancer-related deaths, despite which effective prophylactic measures are unavailable. Vaccination is a powerful tool for generating tumor-specific responses by exposing masked tumors to the immune system. Using CD47, a cell-surface protein that interacts with SIRP-α on macrophages as the target, we developed whole-cell cancer vaccines for the subcutaneous mouse melanoma. We immunized C57BL/6 mice using non-replicating CD47-/- B16F10 cells and challenged the mice with B16F10 tumors a week later. We showed that the vaccines effectively suppressed tumor growth: 33% of vaccinated mice remained tumor-free 90 days post tumor challenge, and the rest showed 2-fold reduced tumor growth rates and 5-fold reduced tumor sizes. Immunophenotyping showed a dramatic increase in activated effector cell subsets and M1-type macrophages aided by a significant reduction in the tumor-associated macrophage and myeloid-derived suppressor cell compartments. Additionally, we found that CD47 was down regulated in the vaccinated mice significantly. It has been emphasized in previous research that common characteristics of tumors that have been irreversible thus far like metastatic potential, downregulation of MHC genes, and overexpression of evasion markers, can be attributed to the specific suppressive phenotypes of antigen presenting cells in the tumor microenvironment (TME). In the tumors that did escape after vaccination, the TME was analyzed for immune phenotypes at three different stages of tumor growth - small (200-300mm3), medium (500-600mm3), and large (800-900mm3) tumor volumes. In comparison with the vehicle (PBS) vaccinated tumors, we found that in the CD47-/- B16F10 vaccinated tumors, the immune cells infiltrating the tumors maintain significantly homogenous levels throughout the different tumor growth stages. This was true especially for the suppressive phenotypes like the myeloid derived suppressor cells (MDSCs), the tumor-associated macrophages (TAMs), and the PD-1+ exhausted T cell subsets. Additionally, we performed deeper mechanistic analyses of the various TAM subsets infiltrating all the tumors and found that the CD47-/- B16F10 vaccinated tumors had significantly less TAMs, except for one specific subset - Ly6Chi MHC-IIlow TAMs. These TAMs are known to infiltrate in hypoxic conditions and we found corresponding increase in neo-vasculature around these tumors. These TAMs were also found to express high levels of Ly6G, the neutrophil lineage marker. Overall, our preliminary characterization showed that vaccination with syngeneic CD47-/- tumor cells orchestrates the levels and enhances distinct subtypes of tumor infiltrating suppressive lymphocytes, opening up avenues for further combinatorial therapy regimes and aiding the process of turning “cold” tumors “hot”. Citation Format: Subhadra Jayaraman Rukmini, Huanjing Bi, Puloma Sen, Benjamin Everhart, Busra Buyuk, Sha Jin, Kaiming Ye. Vaccination with CD47-/- whole tumor cell vaccines creates a homogenous tumor microenvironment with distinct suppressor cell phenotypes [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2019; 2019 Mar 29-Apr 3; Atlanta, GA. Philadelphia (PA): AACR; Cancer Res 2019;79(13 Suppl):Abstract nr LB-278.

This report summarizes the outcomes of the NSF Workshop on Mapping and Engineering the Brain, held at Arlington, VA, during August 13-14, 2013. Three grand challenges were identified, including high spatiotemporal resolution neuroimaging, perturbation-based neuroimaging, and neuroimaging in naturalistic environments. It was highlighted that each grand challenge requires groundbreaking discoveries, enabling technologies, appropriate knowledge transfer, and multi- and transdisciplinary education and training for success.

Human pluripotent stem cells (hPSCs) are self-renewing and have the potential to differentiate into any cell type in the body, making them attractive cell sources for applications in tissue engineering and regenerative medicine. However, in order for hPSCs to find use in the clinic, the mechanisms underlying their self-renewal and lineage commitment must be better understood. Many technologies that have been developed for the maintenance and directed differentiation of hPSCs involve the use of soluble growth factors, but recent studies suggest that other elements of the hPSC microenvironment also influence the growth and differentiation of hPSCs. This includes the influences of cell–cell interactions, substrate mechanics, cellular interactions with extracellular matrix, as well as the nanotopography of the substrate and physical forces such as shear stress, cyclic mechanical strain, and compression. In this review, we highlight the recent progress of this area of research and discuss ways in which the mechanical cues may be incorporated into hPSC culture regimes to improve methods for expanding and differentiating hPSCs.

Breast cancer is the commonest type of malignant tumor in women, comprising of about 30% of all cancers in women worldwide. In the past decades, the mortality of breast cancer patients has significantly been reduced due to the adoption of periodic breast cancer screening and the emergence of various treatments, such as radiotherapy, chemotherapy, and surgery. Currently, chemotherapy is one of the most effective treatments for breast cancer. Its side effects, however, pose a long-term challenge on a patient's health. Thus, it is highly desirable to develop new therapies that can specifically target carcinoma cells without damaging normal and healthy cells. Tremendous efforts have been made to develop targeted drug delivery systems for breast cancer treatment. In this review, we intend to systematically examine recent progresses made along these directions. We highlighted various delivery carriers designed for directing the diffusion of therapeutic agents inside tumors to kill or suppress breast cancer cells. These carriers include molecular-recognition-element modified anticancer agents, stem cells that have tropism to breast cancers, nanoparticle-based anticancer drugs, and anticancer peptides. In particular, we discussed recent patents on the new targeted therapeutic delivery systems, with an emphasis on triple-negative breast cancer therapies.

The side effects of radio- and chemo-therapy pose long-term challenges on a cancer patient’s health. It is, therefore, highly desirable to develop more effective therapies that can specifically target carcinoma cells without damaging normal and healthy cells. Tremendous efforts have been made in the past to develop targeted drug delivery systems for solid cancer treatment. In this study, a new aptamer, A10-3-J1, which recognizes the extracellular domain of the prostate specific membrane antigen (PSMA), was designed. A super paramagnetic iron oxide nanoparticle-aptamer-doxorubicin (SPIO-Apt-Dox) was fabricated and employed as a targeted drug delivery platform for cancer therapy. This DNA RNA hybridized aptamer antitumor agent was able to enhance the cytotoxicity of targeted cells while minimizing collateral damage to non-targeted cells. This SPIO-Apt-Dox nanoparticle has specificity to PSMA+ prostate cancer cells. Aptamer inhibited nonspecific uptake of membrane-permeable doxorubic to the non-target cells, leading to reduced untargeted cytotoxicity and endocytic uptake while enhancing targeted cytotoxicity and endocytic uptake. The experimental results indicate that the drug delivery platform can yield statistically significant effectiveness being more cytotoxic to the targeted cells as opposed to the non-targeted cells.

One of the major hurdles in studying diabetes pathophysiology is the lack of adequate methodology that allows for direct and real-time determination of glucose transport and metabolism in cells and tissues. In this article, we present a new methodology that adopts frequency-domain fluorescence lifetime imaging microscopy (FD-FLIM) to visualize and quantify the dynamics of intracellular glucose within living cells using a biosensor protein based on fluorescence resonance energy transfer (FRET).The biosensor protein was developed by fusing a FRET pair, an AcGFP1 donor and a mCherry acceptor to N- and C- termini of a mutant glucose-binding protein (GBP), respectively. The probe was expressed and biosynthesized inside the cells, offering continuous monitoring of glucose dynamics in real time through fluorescence lifetime imaging microscopy (FLIM) measurement.We transfected the deoxyribonucleic acid of the AcGFP1-GBP-mCherry sensor into murine myoblast cells, C2C12, and continuously monitored the changes in intracellular glucose concentrations in response to the variation in extracellular glucose, from which we determined glucose uptake and clearance rates. The distribution of intracellular glucose concentration was also characterized. We detected a high glucose concentration in a region close to the cell membrane and a low glucose concentration in a region close to the nucleus. The monoexponential decay of AcGFP1 was distinguished using FD-FLIM.This work enables continuous glucose monitoring (CGM) within living cells using FD-FLIM and a biosensor protein. The sensor protein developed offers a new means for quantitatively analyzing glucose homeostasis at the cellular level. Data accumulated from these studies will help increase our understanding of the pathology of diabetes.

Advanced Biomanufacturing: A Radical Manufacturing Paradigm Shift from Conventional, Centralized, Off-the-Shelf Production to On-Demand, Decentralized, Plug-and-Play Production of Cell- and Tissue-Based Products

While the determination of mechanical properties of a hard scaffold is relatively straightforward, the mechanical testing of a soft tissue scaffold poses significant challenges due in part to its fragility. Here, we report a new approach for characterizing the stiffness and elastic modulus of a soft scaffold through atomic force microscopy (AFM) nanoindentation. Using collagen-chitosan hydrogel scaffolds as model soft tissue scaffolds, we demonstrated the feasibility of using AFM nanoindentation to determine a force curve of a soft tissue scaffold. A mathematical model was developed to ascertain the stiffness and elastic modulus of a scaffold from its force curve obtained under different conditions. The elastic modulus of a collagen-chitosan (80%/20%, v/v) scaffold is found to be 3.69 kPa. The scaffold becomes stiffer if it contains more chitosan. The elastic modulus of a scaffold composed of 70% collagen and 30% chitosan is about 11.6 kPa. Furthermore, the stiffness of the scaffold is found to be altered significantly by extracellular matrix deposited from cells that are grown inside the scaffold. The elastic modulus of collagen-chitosan scaffolds increased from 10.5 kPa on day 3 to 63.4 kPa on day 10 when human foreskin fibroblast cells grew inside the scaffolds. Data acquired from these measurements will offer new insights into understanding cell fate regulation induced by physiochemical cues of tissue scaffolds.

The development of implantable glucose sensors for use in diabetes treatment has been pursued for decades. However, enzyme-based glucose sensors often fail in vivo. In our previous work, we engineered a novel glucose indicator protein (GIP) that can sense glucose without relying on any enzymes and cofactors. Nevertheless, this GIP is unsuitable for blood glucose monitoring due to its low dissociation constant. Here, we report a novel approach to creating a new GIP that can be used to monitor blood glucose level. By disrupting pi–pi stacking around GIP's glucose binding site through site-directed mutagenesis, we showed that GIP's dissociation constant can be manipulated from 0.026 mM to 7.86 mM. This approach yielded four GIP mutants. We showed that one of the mutants can be used to detect glucose from 0 to 32 mM, while another mutant can be employed to visualize intracellular glucose (0–200 μM) within living cells through FRET imaging microscopy measurement.

The production of mature pancreatic cells that function similarly to primary islets is the premise of cell therapy for diabetes. Here, we describe a novel approach to generating more mature insulin-producing cells from embryonic stem (ES) cells. A three-dimensional (3D) ES cell pancreatic differentiation system was developed and used to direct the ES cell differentiation into glucose-responsive, insulin-secreting cells. Using mouse ES cells as a model, we demonstrate that more mature insulin-producing cells can be generated from ES cells in 3D cultures. The 3D differentiated pancreatic endocrine cells can assemble into an islet-like tissue structure that displays greater similarities in phenotype and gene expression profile to adult mouse pancreatic islets, that is, with beta cells in the core and non-beta cells forming the mantel, leading to a significant improvement of the maturity of the insulin-producing cells. Our findings show that nearly 50-60% of the cells in 3D formed cell clusters express insulin. More importantly, those cells exhibit a high level of glucose-responsive insulin and C-peptide syntheses and release. A high level of expression of glucose transporter-2 was also detected in these cells. Compared to two-dimensional ES cell-derived insulin-producing cells, the insulin release from 3D ES cell-derived insulin-producing cells showed a nearly fivefold (p

A decade of aggressive researches on carbon nanotubes (CNTs) has paved way for extending these unique nanomaterials into a wide range of applications. In the relatively new arena of nanobiotechnology, a vast majority of applications are based on CNTs, ranging from miniaturized biosensors to organ regeneration. Nevertheless, the complexity of biological systems poses a significant challenge in developing CNT-based tissue engineering applications. This review focuses on the recent developments of CNT-based tissue engineering, where the interaction between living cells/tissues and the nanotubes have been transformed into a variety of novel techniques. This integration has already resulted in a revaluation of tissue engineering and organ regeneration techniques. Some of the new treatments that were not possible previously become reachable now. Because of the advent of surface chemistry, the CNT's biocompatibility has been significantly improved, making it possible to serve as tissue scaffolding materials to enhance the organ regeneration. The superior mechanic strength and chemical inert also makes it ideal for blood compatible applications, especially for cardiopulmonary bypass surgery. The applications of CNTs in these cardiovascular surgeries led to a remarkable improvement in mechanical strength of implanted catheters and reduced thrombogenicity after surgery. Moreover, the functionalized CNTs have been extensively explored for in vivo targeted drug or gene delivery, which could potentially improve the efficiency of many cancer treatments. However, just like other nanomaterials, the cytotoxicity of CNTs has not been well established. Hence, more extensive cytotoxic studies are warranted while converting the hydrophobic CNTs into biocompatible nanomaterials.

With increasing reports on bioterrorism, avian flu, and other bio-threats, rapid and real time detection methods are highly warranted. Studies on developing highly sensitive immunosensors aiming at the early detection and clinical diagnoses of various diseases including cancer are undertaken all over the globe. Carbon nanotubes (CNTs) have been widely discussed as materials with enormous potential for a wide range of in vivo and in vitro bioapplications, ranging from drug delivery to highly sensitive biosensors, owing to their superior electronic and mechanical properties along with nanoscale dimensions. Though a lot of attention has been drawn toward carbon nanotubes for the past 15 years in academia and to a certain extent in industry, CNT-based immunosensors and other applications are still in the nascent stage, and there are many challenges to be overcome for the successful commercialization of the concepts. This article highlights on the recent developments and the possible impacts of carbon nanotube based immunosensors.

Biomedical application of nanotechnology is a rapidly developing area that raises new prospect in the improvement of diagnosis and treatment of human diseases. The ability to incorporate drugs or genes into a functionalized nanoparticle demonstrates a new era in pharmacotherapy for delivering drugs or genes selectively to tissues or cells. It is envisioned that the transfer of nanoengineering capability into disease therapy will provide constant and concentrated drug delivery to targeted tissues, minimizing systemic side effects and toxicity. We have in this article highlighted the recent state of the art in nanomedicine, focusing particularly on the achievement of nanotechnology in nanoscale drug and gene delivery in vitro and in vivo. In addition, a specific emphasis has been placed on the use of nanotechnology to improve controlled drug release and sustainable drug delivery in solid tumors and on new drug therapies for age-related neurodegenerative disorders.

A rapid and sensitive detection technology is highly desirable for specific detection of E. coli O157:H7, one of the leading bacterial pathogens causing foodborne illness. In this study, we reported the rapid detection of E. coli O157:H7 by using calcium signaling of the B cell upon cellular membrane anchors anti-E. coli O157:H7 IgM. The binding of E. coli O157:H7 to the IgM on B cell surface activates the B cell receptor (BCR)-induced Ca2+ signaling pathway and results in the release of Ca2+ within seconds. The elevated intracellular Ca2+ triggers Fura-2, a fluorescent Ca2+ indicator, for reporting the presence of pathogens. The Fura-2 is transferred to B cells before detection. The study demonstrated that the developed B cell based biosensor was able to specifically detect E. coli O157:H7 at the low concentration within 10 min in pure culture samples. Finally, the B cell based biosensor was used for the detection of E. coli O157:H7 in ground beef samples. With its short detection time and high sensitivity at the low concentration of the target bacteria, this B cell biosensor shows promise in future application of the high throughput and rapid food detection, biosafety and environmental monitoring.

The success in directed differentiation of human pluripotent stem cells (HPSC) including embryonic stem (hES) and induced pluripotent stem (iPS) cells into islet-like cells raises new hopes for cell-based diabetes therapy. This, however, has not yet been possible due to the difficulty in generating fully functional beta cells in vitro. In many cases, cells differentiated from HPSCs are immature, or in other words, are unsuitable for cell replacement therapy. Most islet-like cells derived from HPSCs in vitro fail to function normally in vivo after transplantation in diabetic animal models. On the other hand, the in vivo maturation of pancreatic endoderm progenitors presents significant successes. We have developed a new approach to mature HPSC-derived pancreatic endoderm cells into glucose-responsive insulin-secreting cells. We constructed a collagen 3D scaffold and discovered that the maturity of beta-like cells can be considerably elevated when HPSC were differentiated into pancreatic endoderm within an engineered 3D scaffold. This observation was confirmed by both real-time PCR assay and glucose challenging experiments. Furthermore, TEM indicated the existence of insulin-secretion granules in these 3D formed cells, suggesting a high degree of maturation of these cells. This study clearly demonstrated more matured beta-like cells can be generated in vitro. The augment of this technology to other stem cell differentiations will bring cell replacement therapy one step closer to treating many diseases such as diabetes in more controllable clinical settings.