Search

A fully integrated Chemicals Strategy for Sustainability (CSS) in respect of chemicals is crucial and must include: • An objective evaluation of the present situation including impacts of 'chemicals of concern' throughout their life cycle, that incorporates sustainability issues. • A framework that facilitates innovation of chemistry-based approaches to tackle each of the key sustainability issues. The EU CSS only addresses adverse impacts and mainly focusses on one aspect of risk assessment, the hazard to humans from individual industrial chemicals. The proposal removes consideration of the nature and amount of exposure, which is a critical determinant of risk. It can be presumed that this is solely to simplify, and hence speed up, regulatory decisions thereby enabling more chemicals to be assessed. The linkage of this proposed approach to address any of the major sustainability issues, such as environmental pollutants is obscure. For example, the well-recognised environmental problems caused by polymers such as plastics are not considered. The proposed change in the assessment methodology lacks any scientific justification and fails to address the sustainability issues the EU and the rest of the world are facing. The authors critically discuss a comprehensive innovative evaluation methodology for the impact of chemicals., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Helmut Greim and Kees van Leeuwen both report a relationship as Member of the Scientific Committee of the European Centre for Ecotoxicology and Toxicology of Chemicals (ECETOC)., (Copyright © 2023 The Authors. Published by Elsevier Inc. All rights reserved.)

The target lipid model (TLM) has been previously applied to predict the aquatic toxicity of hydrocarbons and other nonionic organic chemicals and for deriving the concentrations above which 95% of species should be protected (HC5 values). Several concerns have been identified with the TLM-derived HC5 when it is applied in a substance risk assessment context. These shortcomings were addressed by expanding the acute and chronic toxicity databases to include more diverse taxonomic groups and increase the number of species. The TLM was recalibrated with these expanded databases, resulting in critical target lipid body burdens and acute-to-chronic ratios that met the required guidelines for using species sensitivity distributions in substance risk assessment. The HC5 equation was further revised to consider covarying model parameters. The calculated HC5 values derived from the revised TLM framework were validated using an independent data set for hydrocarbons comprising 106 chronic values across plants, invertebrates, and fish. Assuming a sum binomial distribution, the 95% confidence limit for a 5% failure is between 0.8 and 9.2%. Eight chronic values fell below the HC5, corresponding to an excursion of 7.5%, which falls within the expected uncertainty bounds. Thus, calculated HC5s derived from the revised TLM framework were found to be consistent with the intended protection goals. Environ Toxicol Chem 2018;37:1579-1593. © 2018 SETAC., (© 2018 SETAC.)

The PETROTOX model was developed to perform aquatic hazard assessment of petroleum substances based on substance composition. The model relies on the hydrocarbon block method, which is widely used for conducting petroleum substance risk assessments providing further justification for evaluating model performance. Previous work described this model and provided a preliminary calibration and validation using acute toxicity data for limited petroleum substance. The objective of the present study was to re-evaluate PETROTOX using expanded data covering both acute and chronic toxicity endpoints on invertebrates, algae, and fish for a wider range of petroleum substances. The results indicated that recalibration of 2 model parameters was required, namely, the algal critical target lipid body burden and the log octanol-water partition coefficient (K OW ) limit, used to account for reduced bioavailability of hydrophobic constituents. Acute predictions from the updated model were compared with observed toxicity data and found to generally be within a factor of 3 for algae and invertebrates but overestimated fish toxicity. Chronic predictions were generally within a factor of 5 of empirical data. Furthermore, PETROTOX predicted acute and chronic hazard classifications that were consistent or conservative in 93 and 84% of comparisons, respectively. The PETROTOX model is considered suitable for the purpose of characterizing petroleum substance hazard in substance classification and risk assessments. Environ Toxicol Chem 2017;36:2245-2252. © 2017 SETAC., (© 2017 SETAC.)

Because of the large number of possible aromatic hydrocarbon structures, predictive toxicity models are needed to support substance hazard and risk assessments. Calibration and evaluation of such models requires toxicity data with well-defined exposures. The present study has applied a passive dosing method to generate reliable chronic effects data for 8 polycyclic aromatic hydrocarbons (PAHs) on the green algae Pseudokirchneriella subcapitata and the crustacean Ceriodaphnia dubia. The observed toxicity of these substances on algal growth rate and neonate production were then compared with available literature toxicity data for these species, as well as target lipid model and chemical activity-based model predictions. The use of passive dosing provided well-controlled exposures that yielded more consistent data sets than attained by past literature studies. Results from the present study, which were designed to exclude the complicating influence of ultraviolet light, were found to be well described by both target lipid model and chemical activity effect models. The present study also found that the lack of chronic effects for high molecular weight PAHs was consistent with the limited chemical activity that could be achieved for these compounds in the aqueous test media. Findings from this analysis highlight that variability in past literature toxicity data for PAHs may be complicated by both poorly controlled exposures and photochemical processes that can modulate both exposure and toxicity. Environ Toxicol Chem 2016;35:2948-2957. © 2016 SETAC., (© 2016 SETAC.)

Substance risk assessments require estimation of predicted no-effect concentrations (PNECs) in soil and sediment. The present study applies the target lipid model (TLM) and equilibrium partitioning (EqP) model to toxicity data to evaluate the extrapolation of the TLM-derived aquatic PNECs to these compartments. This extrapolation assumes that the sensitivity of aquatic species is similar to that of terrestrial and benthic species. The acute species sensitivity distribution, expressed in terms of species-specific critical target lipid body burdens, was computed using the TLM-EqP framework and found to span a similar range as the aquatic organism species sensitivity distribution but with a slightly lower median value (less than 2 times). The species sensitivity distribution for acute-to-chronic ratios also exhibited a similar range and distribution across species, suggesting similar mechanisms of action. This hypothesis was further tested by comparing empirical soil/sediment chronic effect levels to the calculated PNEC derived using TLM-EqP. The results showed that 95% of the compiled chronic effects data fell above the PNEC, confirming an adequate protection level. These findings support the conclusion that TLM-derived aquatic PNECs can be successfully extrapolated to derive credible PNECs for soil and sediment compartments., (© 2014 SETAC.)

PETRORISK is a modeling framework used to evaluate environmental risk of petroleum substances and human exposure through these routes due to emissions under typical use conditions as required by the European regulation for the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH). Petroleum substances are often complex substances comprised of hundreds to thousands of individual hydrocarbons. The physicochemical, fate, and effects properties of the individual constituents within a petroleum substance can vary over several orders of magnitude, complicating risk assessment. PETRORISK combines the risk assessment strategies used on single chemicals with the hydrocarbon block approach to model complex substances. Blocks are usually defined by available analytical characterization data on substances that are expressed in terms of mass fractions for different structural chemical classes that are specified as a function of C number or boiling point range. The physicochemical and degradation properties of the blocks are determined by the properties of representative constituents in that block. Emissions and predicted exposure concentrations (PEC) are then modeled using mass-weighted individual representative constituents. Overall risk for various environmental compartments at the regional and local level is evaluated by comparing the PECs for individual representative constituents to corresponding predicted no-effect concentrations (PNEC) derived using the Target Lipid Model. Risks to human health are evaluated using the overall predicted human dose resulting from multimedia environmental exposure to a substance-specific derived no-effect level (DNEL). A case study is provided to illustrate how this modeling approach has been applied to assess the risks of kerosene manufacture and use as a fuel., (© 2014 SETAC.)

In the European Union, Directive 92/32/EC and EC Council Regulation (EC) 793/93 require the risk assessment of new and existing substances, respectively. Principles for this risk assessment have been laid down, supported by a detailed package of Technical Guidance Documents. Against this background the European Union System for the Evaluation of Substances (EUSES) has been developed. This software can be used to carry out tiered risk assessments of increasing complexity on the basis of increasing data requirements. The exposure assessment, effects assessment and risk characterisation are carried out for environmental populations as well as for human beings, including workers, consumers and man exposed through the environment. EUSES is the result of a co-ordinated effort of EU Member States, the European Commission and the European Chemical Industry.