Search

After reconstructing the anterior cruciate ligament (ACL), unsatisfactory bone tendon interface healing may often induce tunnel enlargement at the early healing stage. With good biological features and high formability, Magnesium-Zinc-Gadolinium (ZG21) wires are developed to bunch the tendon graft for matching the bone tunnel during transplantation. Microstructure, tensile strength, degradation, and cytotoxicity of ZG21 wire are evaluated. The rabbit model is used for assessing the biological effects of ZG21 wire by Micro-CT, histology, and mechanical test. The SEM/EDS, immunochemistry, and in vitro assessments are performed to investigate the underlying mechanism. Material tests demonstrate the high formability of ZG21 wire as surgical suture. Micro-CT shows ZG21 wire degradation accelerates tunnel bone formation, and histologically with earlier and more fibrocartilage regeneration at the healing interface. The mechanical test shows higher ultimate load in the ZG21 group. The SEM/EDS presents ZG21 wire degradation triggered calcium phosphate (Ca-P) deposition. IHC results demonstrate upregulation of Wnt3a, BMP2, and VEGF at the early phase and TGFβ3 and Type II collagen at the late phase of healing. In vitro tests also confirmed the Ca-P in the metal extract could elevate the expression of Wnt3a, β catenin, ocn and opn to stimulate osteogenesis. Ex vivo tests of clinical samples indicated suturing with ZG21 wire did not weaken the ultimate loading of human tendon tissue. In conclusion, the ZG21 wire is feasible for tendon graft bunching. Its degradation products accelerated intra-tunnel endochondral ossification at the early healing stage and therefore enhanced bone-tendon interface healing in ACL reconstruction.

Osteochondral defect (OCD) is a common but challenging condition in orthopaedics that imposes huge socioeconomic burdens in our aging society. It is imperative to accelerate the R&D of regenerative scaffolds using osteochondral tissue engineering concepts. Yet, all innovative implant-based treatments require animal testing models to verify their feasibility, biosafety, and efficacy before proceeding to human trials. Rabbit models offer a more clinically relevant platform for studying OCD repair than smaller rodents, while being more cost-effective than large animal models. The core-decompression drilling technique to produce full-thickness distal medial femoral condyle defects in rabbits can mimic one of the trauma-relevant OCD models. This model is commonly used to evaluate the implant’s biosafety and efficacy of osteochondral dual-lineage regeneration. In this article, we initially indicate the methodology and describe a minimally-invasive surgical protocol in a step-wise manner to generate a standard and reproducible rabbit OCD for scaffold implantation. Besides, we provide a detailed procedure for sample collection, processing, and evaluation by a series of subsequent standardized biochemical, radiological, biomechanical, and histological assessments. In conclusion, the well-established, easy-handling, reproducible, and reliable rabbit OCD model will play a pivotal role in translational research of osteochondral tissue engineering.

As a highly specialized shock-absorbing connective tissue, articular cartilage (AC) has very limited self-repair capacity after traumatic injuries, posing a heavy socioeconomic burden. Common clinical therapies for small- to medium-size focal AC defects are well-developed endogenous repair and cell-based strategies, including microfracture, mosaicplasty, autologous chondrocyte implantation (ACI), and matrix-induced ACI (MACI). However, these treatments frequently result in mechanically inferior fibrocartilage, low cost-effectiveness, donor site morbidity, and short-term durability. It prompts an urgent need for innovative approaches to pattern a pro-regenerative microenvironment and yield hyaline-like cartilage with similar biomechanical and biochemical properties as healthy native AC. Acellular regenerative biomaterials can create a favorable local environment for AC repair without causing relevant regulatory and scientific concerns from cell-based treatments. A deeper understanding of the mechanism of endogenous cartilage healing is furthering the (bio)design and application of these scaffolds. Currently, the utilization of regenerative biomaterials to magnify the repairing effect of joint-resident endogenous stem/progenitor cells (ESPCs) presents an evolving improvement for cartilage repair. This review starts by briefly summarizing the current understanding of endogenous AC repair and the vital roles of ESPCs and chemoattractants for cartilage regeneration. Then several intrinsic hurdles for regenerative biomaterials-based AC repair are discussed. The recent advances in novel (bio)design and application regarding regenerative biomaterials with favorable biochemical cues to provide an instructive extracellular microenvironment and to guide the ESPCs (e.g. adhesion, migration, proliferation, differentiation, matrix production, and remodeling) for cartilage repair are summarized. Finally, this review outlines the future directions of engineering the next-generation regenerative biomaterials toward ultimate clinical translation.

Background: Medication-related osteonecrosis of the jaw (MRONJ) is a severe complication associated with antiresorptive medications managing osteoporosis, such as bisphosphonates (BPs). To date, there is very limited evidence from prospective, controlled studies to support or refute the controversial prevention regimen that if a discontinuation of BPs before dentoalveolar surgery, so called “drug holiday”, is effective in reducing the risk of MRONJ development in patients with osteoporosis. We proposed an experimental animal study, aiming to investigate the prevention of MRONJ following tooth extractions in osteoporotic condition, with the implementation of a BP drug holiday. Methods: Twenty rats were subjected to bilateral ovariectomy. After establishing the osteoporotic condition, all rats were exposed to weekly injections of zoledronate acid (ZA) for 8 weeks. After ZA treatment, 10 rats were subjected to dental extraction and defined as control group, and the rest 10 rats assigned to the DH group had a drug holiday of 8 weeks prior to dental extraction. Eight weeks after the dentoalveolar surgery, bone turnover biomarker in serum, occurrence of MRONJ-like lesion and histomorphometric assessment of osteonecrosis in mandible, and bone microarchitecture indices in femur, were examined. Results: Eight weeks after dental extraction, the DH group showed a recovered osteoclastic activity, indicated by significantly increased number of osteoclasts in the mandibles and serum level of C-terminal telopeptides of type I collagen, as compared to the control group. No significant differences were observed in the gross-view and histological occurrences of MRONJ-like lesions between the two groups.There was no significant difference in bone microarchitecture in the femur between the control and DH groups before ZA therapy and 8 weeks after dental extraction. Conclusion: Our data provided the first experimental evidence in the osteoporotic animal model that the implementation of a BP holiday in prior to dental extractions could partially recover osteoclastic activity, but could not alleviate the development of MRONJ-like lesion or exacerbate the osteoporotic condition in the femur. Longer-term drug holiday, or combination of drug holiday and other prophylaxes to prevent MRONJ in patients with osteoporosis could be worth exploring in future studies, to pave the way for clinical managements. The translational potential of this article: This in vivo prospective study reported that a recovery of osteoclastic activity by a BP drug holiday for 8 weeks in osteoporosis rats did not alleviate the development of MRONJ-like lesion followed by dental extractions. It contributes to the understanding of regimens to prevent MRONJ.

Mandibular defect becomes a prevalent maxillofacial disease resulting in mandibular dysfunctions and huge psychological burdens to the patients. Considering the routine presence of oral contaminations and aesthetic restoration of facial structures, the current clinical treatments are however limited, incapable to reconstruct the structural integrity and regeneration, spurring the need for cost-effective mandibular tissue engineering. Hydrogel systems possess great merit for mandibular reconstruction with precise involvement of cells and bioactive factors. In this review, current clinical treatments and distinct mode(s) of mandible formation and pathological resorption are summarized, followed by a review of hydrogel-related mandibular tissue engineering, and an update on the advanced fabrication of hydrogels with improved mechanical property, antibacterial ability, injectable form, and 3D bioprinted hydrogel constructs. The exploration of advanced hydrogel systems will lay down a solid foundation for a bright future with more biocompatible, effective, and personalized treatment in mandibular reconstruction.

Abstract The purpose of this prospective study is to compare the Chinese visceral adiposity index (CVAI) between early rheumatoid arthritis (ERA) patients and healthy controls; and to assess the relationship between CVAI and the bone microstructure using high-resolution peripheral quantitative computed tomography (HR-pQCT) in ERA patients. 104 female ERA and 100 age-, gender- and BMI-matched healthy controls were recruited for the comparison of CVAI. All ERA patients were prospectively followed for 1 year. HR-pQCT scan of the distal radius, tibia and second metacarpal head were performed at baseline and after one-year. ERA patients were divided into two sub-groups according to the median CVAI value (65.73) (low CVAI and high CVAI groups). CVAI in the ERA group was significantly higher than the controls group (p = 0.01). At baseline, the high CVAI group had a higher ESR level (p = 0.004) while the cortical volumetric bone mineral density (vBMD) was lower (at both the distal radius and tibia, all p

Abstract The knowledge of osteoarthritis (OA) has nowadays been extended from a focalized cartilage disorder to a multifactorial disease. Although recent investigations have reported that infrapatellar fat pad (IPFP) can trigger inflammation in the knee joint, the mechanisms behind the role of IPFP on knee OA progression remain to be defined. Here, dysregulated osteopontin (OPN) and integrin β3 signaling are found in the OA specimens of both human and mice. It is further demonstrated that IPFP‐derived OPN participates in OA progression, including activated matrix metallopeptidase 9 in chondrocyte hypertrophy and integrin β3 in IPFP fibrosis. Motivated by these findings, an injectable nanogel is fabricated to provide sustained release of siRNA Cd61 (RGD−Nanogel/siRNA Cd61) that targets integrins. The RGD−Nanogel possesses excellent biocompatibility and desired targeting abilities both in vitro and in vivo. Local injection of RGD−Nanogel/siRNA Cd61 robustly alleviates the cartilage degeneration, suppresses the advancement of tidemark, and reduces the subchondral trabecular bone mass in OA mice. Taken together, this study provides an avenue for developing RGD−Nanogel/siRNA Cd61 therapy to mitigate OA progression via blocking OPN‐integrin β3 signaling in IPFP.

Osteoporosis and degenerative endocrine diseases are some of the major causes of disability in the elderly. The feedback loop in the endocrine system works to control the release of hormones and maintain the homeostasis of metabolism, thereby regulating the function of target organs. The breakdown of this feedback loop results in various endocrine and metabolic disorders, such as osteoporosis, type II diabetes, hyperlipidemia, etc. The direct regulation of redox homeostasis is one of the most attractive strategies to redress the imbalance of the feedback loop. The biophysical regulation of redox homeostasis can be achieved through engineered dynamic hydrogel niches, with which cellular mechanics and redox homeostasis are intrinsically connected. Mechanotransduction-dependent redox signaling is initiated by cell surface protein assemblies, cadherins for cell–cell junctions, and integrins for cell–ECM interactions. In this review, we focused on the biophysical regulation of redox homeostasis via the tunable cell–ECM interactions in the engineered dynamic hydrogel niches. We elucidate processes from the rational design of the hydrogel matrix to the mechano-signaling initiation and then to the redox response of the encapsulated cells. We also gave a comprehensive summary of the current biomedical applications of this strategy in several degenerative endocrine disease models.

Articular cartilage (AC) is an avascular and flexible connective tissue located on the bone surface in the diarthrodial joints. AC defects are common in the knees of young and physically active individuals. Because of the lack of suitable tissue-engineered artificial matrices, current therapies for AC defects, especially full-thickness AC defects and osteochondral interfaces, fail to replace or regenerate damaged cartilage adequately. With rapid research and development advancements in AC tissue engineering (ACTE), functionalized hydrogels have emerged as promising cartilage matrix substitutes because of their favorable biomechanical properties, water content, swelling ability, cytocompatibility, biodegradability, and lubricating behaviors. They can be rationally designed and conveniently tuned to simulate the extracellular matrix of cartilage. This article briefly introduces the composition, structure, and function of AC and its defects, followed by a comprehensive review of the exquisite (bio)design and (bio)fabrication of functionalized hydrogels for AC repair. Finally, we summarize the challenges encountered in functionalized hydrogel-based strategies for ACTE both in vivo and in vitro and the future directions for clinical translation.

Background: Medication-related osteonecrosis of the jaw (MRONJ) is a serious complication associated with antiresorptive and antiangiogenic medications, of which impaired angiogenesis is a key pathological alteration. Since Magnesium (Mg)-based implants possess proangiogenic effects, we hypothesized that the biodegradable Mg implant could alleviate the development of MRONJ via enhancing angiogenesis. Methods: MRONJ model was established and divided into the Veh ​+ ​Ti group (Vehicle-treated rat, with Titanium (Ti) implant), BP ​+ ​Ti group (Bisphosphonate (BP)-treated rat, with Ti implant), BP ​+ ​Mg group (BP-treated rat, with Mg implant), BP ​+ ​Mg ​+ ​SU5416 group (BP-treated rat, with Mg implant and vascular endothelial growth factor (VEGF) receptor-2 inhibitor), BP ​+ ​Mg ​+ ​BIBN group (BP-treated rat, with Mg implant and calcitonin gene-related peptide (CGRP) receptor antagonist), and BP ​+ ​Mg ​+ ​SU5416+BIBN group (BP-treated rat, with Mg implant and VEGF receptor-2 inhibitor and CGRP receptor antagonist). The occurrence of MRONJ, alveolar bone necrosis, new bone formation and vessel formation were assessed by histomorphometry, immunohistochemistry, and micro-CT analysis. Results: Eight weeks after surgery, the BP ​+ ​Mg group had significantly reduced occurrence of MRONJ-like lesion and histological osteonecrosis, increased bone microstructural parameters, and increased expressions of VEGFA and CGRP, than the BP ​+ ​Ti group. By simultaneously blocking VEGF receptor-2 and CGRP receptor, the vessel volume and new bone formation in the BP ​+ ​Mg group were significantly decreased, meanwhile the occurrence of MRONJ-like lesion and histological bone necrosis were significantly increased. Conclusion: Biodegradable Mg implant could alleviate the development of MRONJ-like lesion, possibly via upregulating VEGF- and CGRP-mediated angiogenesis. Mg-based implants have the translational potential to be developed as a novel internal fixation device for patients with the risk of MRONJ. The Translational potential of this article: This work reports a biodegradable Mg implant which ameliorates the development of MRONJ-like lesions possibly due to its angiogenic property. Mg-based implants have the potential to be developed as a novel internal fixation device for patients at the risk of MRONJ.

Magnesium metal and its alloys are being developed as effective orthopedic implants; however, the mechanisms underlying the actions of magnesium on bones remain unclear. Cystic fibrosis, the most common genetic disease in Caucasians caused by the mutation of CFTR, has shown bone disorder as a key clinical manifestation, which currently lacks effective therapeutic options. Here we report that implantation of magnesium-containing implant stimulates bone formation and improves bone fracture healing in CFTR-mutant mice. Wnt/β-catenin signaling in the bone is enhanced by the magnesium implant, and inhibition of Wnt/β-catenin by iCRT14 blocks the magnesium implant to improve fracture healing in CFTR-mutant mice. We further demonstrate that magnesium ion enters osteocytes, increases intracellular cAMP level and activates ATF4, a key transcription factor known to regulate Wnt/β-catenin signaling. In vivo knockdown of ATF4 abolishes the magnesium implant-activated β-catenin in bones and reverses the improved-fracture healing in CFTR-mutant mice. In addition, oral supplementation of magnesium activates ATF4 and β-catenin as well as enhances bone volume and density in CFTR-mutant mice. Together, these results show that magnesium implantation or supplementation may serve as a potential anabolic therapy for cystic fibrosis-related bone disease. Activation of ATF4-dependent Wnt/β-catenin signaling in osteocytes is identified as a previously undefined mechanism underlying the beneficial effect of magnesium on bone formation.

Visceral adipose tissue secretes cytokines to regulate the homeostasis of organs. Here, the authors show that epididymal white adipose tissue-secreted osteopontin induces lipophagocytic mobilization of macrophages and promotes bone matrix degradation via activating osteoclasts.

Abstract Tendon healing is a complex process involving inflammation, proliferation, and remodeling, eventually achieving a state of hypocellularity and hypovascularity. Currently, few treatments can satisfactorily restore the structure and function of native tendon. Bioactive glass (BG) has been shown to possess immunomodulatory and angiogenic properties. In this study, we investigated whether an injectable hydrogel fabricated of BG and sodium alginate (SA) could be applied to enhance tenogenesis following suture repair of injured tendon. We demonstrated that BG/SA hydrogel significantly accelerated tenogenesis without inducing heterotopic ossification based on histological analysis. The therapeutic effect could attribute to increased angiogenesis and M1 to M2 phenotypic switch of macrophages within 7 days post‐surgery. Morphological characterization demonstrated that BG/SA hydrogel partially reverted the pathological changes of Achilles tendon, including increased length and cross‐sectional area (CSA). Finally, biomechanical test showed that BG/SA hydrogel significantly improved ultimate load, failure stress, and tensile modulus of the repaired tendon. In conclusion, administration of an injectable BG/SA hydrogel can be a novel and promising therapeutic approach to augment Achilles tendon healing in conjunction with surgical intervention.

Introduction: Magnesium (Mg) has a prophylactic potential against the onset of hyperlipidemia. Similar to statin, Mg is recommended as lipid-lowering medication for hypercholesterolemia and concomitantly exhibits an association with increased bone mass. The combination of statin with Mg ions (Mg2+) may be able to alleviate the high-fat diet (HFD)-induced bone loss and reduce the side-effects of statin. This study aimed to explore the feasibility of combined Mg2+ with simvastatin (SIM) for treating HFD-induced bone loss in mice and the involving mechanisms. Materials and methods: C57BL/6 male mice were fed with a HFD or a normal-fat diet (NFD). Mice were intraperitoneally injected SIM and/or orally received water with additional Mg2+ until sacrificed. Enzyme-linked immunosorbent assay was performed to measure cytokines and cholesterol in serum and liver lysates. Bone mineral density (BMD) and microarchitecture were assessed by micro-computed tomography (μCT) in different groups. The adipogenesis in palmitate pre-treated HepG2 cells was performed under various treatments. Results: μCT analysis showed that the trabecular bone mass was significantly lower in the HFD-fed group than that in NFD-fed group since week 8. The cortical thickness in HFD-fed group had a significant decrease at week 24, as compared with NFD-fed group. The combination of Mg2+ and SIM significantly attenuated the trabecular bone loss in HFD-fed mice via arresting the osteoclast formation and bone resorption. Besides, such combination also reduced the hepatocytic synthesis of cholesterol and inhibited matrix metallopeptidase 13 (Mmp13) mRNA expression in pre-osteoclasts. Conclusions: The combination of Mg2+ and SIM shows a synergistic effect on attenuating the HFD-induced bone loss. Our current formulation may be a cost-effective alternative treatment to be indicated for obesity-related bone loss.

Abstract Osteoarthritis is the most prevalent chronic and debilitating joint disease, resulting in huge medical and socioeconomic burdens. Intra-articular administration of agents is clinically used for pain management. However, the effectiveness is inapparent caused by the rapid clearance of agents. To overcome this issue, nanoparticles as delivery systems hold considerable promise for local control of the pharmacokinetics of therapeutic agents. Given the therapeutic programs are inseparable from pathological progress of osteoarthritis, an ideal delivery system should allow the release of therapeutic agents upon specific features of disorders. In this review, we firstly introduce the pathological features of osteoarthritis and the design concept for accurate localization within cartilage for sustained drug release. Then, we review the interactions of nanoparticles with cartilage microenvironment and the rational design. Furthermore, we highlight advances in the therapeutic schemes according to the pathology signals. Finally, armed with an updated understanding of the pathological mechanisms, we place an emphasis on the development of “smart” bioresponsive and multiple modality nanoparticles on the near horizon to interact with the pathological signals. We anticipate that the exploration of nanoparticles by balancing the efficacy, safety, and complexity will lay down a solid foundation tangible for clinical translation.

Abstract Peripheral nerve injury is a challenging orthopedic condition that can be treated by autograft transplantation, a gold standard treatment in the current clinical setting. Nevertheless, limited availability of autografts and potential morbidities in donors hampers its widespread application. Bioactive scaffold‐based tissue engineering is a promising strategy to promote nerve regeneration. Additionally, magnesium (Mg) ions enhance nerve regeneration; however, an effectively controlled delivery vehicle is necessary to optimize their in vivo therapeutic effects. Herein, a bisphosphonate‐based injectable hydrogel exhibiting sustained Mg2+ delivery for peripheral nerve regeneration is developed. It is observed that Mg2+ promoted neurite outgrowth in a concentration‐dependent manner by activating the PI3K/Akt signaling pathway and Sema5b. Moreover, implantation of polycaprolactone (PCL) conduits filled with Mg2+‐releasing hydrogel in 10 mm nerve defects in rats significantly enhanced axon regeneration and remyelination at 12 weeks post‐operation compared to the controls (blank conduits or conduits filled with Mg2+‐absent hydrogel). Functional recovery analysis reveals enhanced reinnervation in the animals treated with the Mg2+‐releasing hydrogel compared to that in the control groups. In summary, the Mg2+‐releasing hydrogel combined with the 3D‐engineered PCL conduit promotes peripheral nerve regeneration and functional recovery. Thus, a new strategy to facilitate the repair of challenging peripheral nerve injuries is proposed.

Introduction: We previously demonstrated that magnesium ions (Mg2+) was a novel therapeutic alternative for osteoarthritis (OA) through promoting the hypoxia inducible factor-1α (HIF-1α)-mediated cartilage matrix synthesis. However, oxidative stress can inhibit the expression of HIF-1α, amplify the inflammation that potentially impairs the therapeutic efficacy of Mg2+ in OA. Vitamin (VC), a potent antioxidant, may enhance the efficacy of Mg2+ in OA treatment. This study aims to investigate the efficacy of combination of Mg2+ and VC on alleviating joint destruction and pain in OA. Material and methods: Anterior cruciate ligament transection with partial medial meniscectomy induced mice OA model were randomly received intra-articular injection of either saline, MgCl2 (0.5 mol/L), VC (3 mg/ml) or MgCl2 (0.5 mol/L) plus VC (3 mg/ml) at week 2 post-operation, twice weekly, for 2 weeks. Joint pain and pathological changes were assessed by gait analysis, histology, western blotting and micro-CT. Results: Mg2+ and VC showed additive effects to significantly alleviate the joint destruction and pain. The efficacy of this combined therapy could sustain for 3 months after the last injection. We demonstrated that VC enhanced the promotive effect of Mg2+ on HIF-1α expression in cartilage. Additionally, combination of Mg2+ and VC markedly promoted the M2 polarization of macrophages in synovium. Furthermore, combination of Mg2+ and VC inhibited osteophyte formation and expressions of pain-related neuropeptides. Conclusions: Intra-articular administration of Mg2+ and VC additively alleviates joint destruction and pain in OA. Our current formulation may be a cost-effective alternative treatment for OA.

Abstract The deformation and fracture of surrounding rock in deep underground engineering have the characteristics of time mutation and space continuity. In order to monitor and provide early warning of the dynamic deformation and fracture characteristics of deep surrounding rock, a real‐time digital displacement measuring instrument was developed in this paper. The proposed device represented a kind of surrounding rock deformation and fracture monitoring method, which had the continuous and real‐time advantages. Based upon the simulation experiments, the dynamic deformation and fracture of deep roadway surrounding rock were measured synchronously using the digital displacement measuring instrument testing system (DDMITS) and the V‐STARS measurement system. Comparative measurement results indicated that the DDMITS had a higher reliability. The deformation of roadway surrounding rock gradually increased with the increase of loading. The roof deformation and caving changing patterns in coal seam mining were studied using similar simulation experiments based on the DDMITS. The vertical displacement response of rock strata was more obvious than the horizontal displacement. There was a sharp increase in the vertical displacement during the collapse of the rock strata. Additionally, the vertical displacement velocity showed fluctuations. Meanwhile, the fluctuations in the vertical displacement acceleration increased significantly. The DDMITS could achieve full‐field measurement and the noncontact measurement of three‐dimensional deformation.

Abstract Background Osteopetrosis is a genetic disease characterized by defects in osteoclast formation and function. There were a few cases of subtrochanteric femur fractures treated with dynamic hip screw (DHS) in patients with osteopetrosis, but unfortunately the healing outcome was rather poor. Case presentation We present our experience for treating a patient with intermediate autosomal recessive osteopetrosis (IRO) suffering from subtrochanteric femur fracture. In this case, we successfully used dynamic hip screw (DHS) internal fixation through meticulous preoperative planning and postoperative care, as well as application of surgical techniques. The patient displayed stable internal fixation with no limitation of activities during follow-up for 15 months. In addition to this case, a review of previous case reports showed an increasing number of case reports demonstrating that surgical treatment-related complications could be avoided preoperatively, intraoperatively, and postoperatively. Conclusion DHS for this patient, who suffered from subtrochanteric fractures with osteopetrosis, was successfully implemented. In the light of a comprehensive literature review, preoperative planning, surgical techniques, and postoperative rehabilitation care can significantly reduce the complications.

Background: Distraction osteogenesis (DO) is a functional tissue engineering approach that applies gradual mechanical traction on the bone tissues after osteotomy to stimulate bone regeneration. However, DO still has disadvantages that limit its clinical use, including long treatment duration Methods: Review the current methods of promoting bone formation and consolidation in DO with particular interest on biometal. Results: Numerous approaches, including physical therapy, gene therapy, growth factor-based therapy, stem-cell-based therapy, and improved distraction devices, have been explored to reduce the DO treatment duration with some success. Nevertheless, no approach to date is widely accepted in clinical practice due to various reasons, such as high expense, short biologic half-life, and lack of effective delivery methods. Biometals, including calcium (Ca), magnesium (Mg), zinc (Zn), copper (Cu), manganese (Mn), and cobalt (Co) have attracted attention in bone regeneration attributed to their biodegradability and bioactive components released during in vivo degradation. Conclusion: This review summarizes the current therapies accelerating bone formation in DO and the beneficial role of biometals in bone regeneration, particularly focusing on the use of biometal Mg and its alloy in promoting bone formation in DO. Translational potential: The potential clinical applications using Mg-based devices to accelerate DO are promising. Mg stimulates expression of multiple intrinsic biological factors and the development of Mg as an implantable component in DO may be used to argument bone formation and consolidation in DO.

Objective: The objective of this study was to assess the efficacy and safety of denosumab therapy in osteoporotic postmenopausal women who were previously treated with bisphosphonates. Methods: Meta-analyses of four available randomised controlled trials that compared osteoporotic patients who switched to denosumab from bisphosphonates (n ​= ​1416) and those who continued bisphosphonates therapy (n ​= ​1411) were included. Results: The increase in bone mineral density (BMD) of both the spine and hip was significantly higher in patients who shifted to denosumab than in those who continued bisphosphonates. Despite the incidence of adverse events (AEs) and fractures being comparable, treatment withdrawal owing to AEs was significantly less frequent in the denosumab group. Conclusion: The outcomes and treatment compliance were improved in postmenopausal osteoporotic women who shifted to denosumab from bisphosphonates. The translational potential of this article: The replacement of bisphosphonates with denosumab may lead to better therapeutic efficacy and fewer adherence barriers ​than those with continued usage of bisphosphonates, which in the future may guide the choice of drug therapy in clinics.

Abstract Background Sarcopenia is an aging‐induced deterioration of skeletal muscle mass and function. Low‐magnitude high‐frequency vibration (LMHFV) was shown to improve muscle functions and β‐hydroxy‐β‐methylbutyrate (HMB) to increase muscle mass and strength. Muscle‐derived stem cells (MDSCs) are progenitor cells important for muscle regeneration. We hypothesized that LMHFV and HMB could retard sarcopenia by reducing fat infiltration through inhibiting adipogenesis in MDSCs. Methods Senescence‐accelerated mouse P8 male mice were randomized into control (CTL), HMB, LMHFV (VIB), and combined (COM) groups. Interventions started at age of month 7 and assessed at 1, 2, and 3 months post‐intervention by densitometry, histology, and functional tests. In vitro, MDSCs isolated from gastrocnemius of senescence‐accelerated mouse P8 mice were characterized, randomized into CTL, VIB, HMB, and COM groups, and assessed by oil red O staining, mRNA, and protein expression. Results At 2 months post‐intervention, percentage lean mass of HMB, VIB, and COM groups were significantly higher than CTL group. Twitch, tetanic, and specific tetanic forces of COM group were higher, while specific twitch force of both VIB and COM groups were higher. Grip strength of HMB, VIB, and COM groups were higher. Histologically, both VIB and COM groups presented lower oil red O area than CTL group. Type I muscle fibre in CTL group was higher than HMB, VIB, and COM groups. MDSC were detected in situ by immunofluorescence stain with stem cell antigen‐1 signals confirmed with higher β‐catenin expression in the COM group. The observations were also confirmed in vitro, MDSCs in the HMB, VIB, and COM groups presented lower adipogenesis vs. the CTL group. β‐Catenin mRNA and protein expressions were lower in the CTL group while their relationship was further validated through β‐catenin knock‐down approach. Conclusions Our results showed that combined LMHFV and HMB interventions enhanced muscle strength and decreased percentage fat mass and intramuscular fat infiltration as compared with either treatment alone. Additive effect of LMHFV and HMB was demonstrated in β‐catenin expression than either treatment in MDSCs and altered cell fate from adipogenesis to myogenesis, leading to inhibition of intramuscular lipid accumulation. Wnt/β‐catenin signalling pathway was found to be the predominant regulatory mechanism through which LMHFV and HMB combined treatment suppressed MDSCs adipogenesis.

In this paper, a novel core@shell nanosphere (TiO2@CoAl-LDH) based on layered double hydroxide (LDH) combined with a nano-TiO2 semiconductor was synthesized and introduced to cementitious materials via spraying technology and a smearing method. The compatibility with a cementitious matrix and the effects of TiO2@CoAl-LDH on cement hydration, surface microstructure, and the microscopic mechanical properties of mortar were investigated by AFM, microhardness testing, FESEM, and BET analysis. Meanwhile, the effects of TiO2@CoAl-LDH introduction methods on the photocatalytic performance and durability of the photocatalyst were systematically evaluated by methylene blue (MB) removal ratio and wear testing. The results show that TiO2@CoAl-LDH exhibits enhanced compatibility with cementitious matrices and a higher photocatalytic capacity than individual CoAl-LDH and nano-TiO2. The photocatalytic mortar prepared via spraying technology (CM-C) displays a higher photocatalytic capacity than that prepared via the smearing method (CM-S). Among them, the mortar with two layers of photocatalytic coatings (CM-C2) has the highest MB removal ratio, which reached 95.1% within 120 min of UV-visible light irradiation. While on the other hand, the wear test revealed that the smeared mortar has a higher photocatalytic capacity and better photocatalyst durability than the sprayed mortar. This work is expected to contribute to the development of multifunctional sustainable building materials.

Natural extracellular matrix (ECM) is highly heterogeneous and anisotropic due to the existence of biomacromolecule bundles and pores. Hydrogels have been proposed as ideal carriers for therapeutic cells and drugs in tissue engineering and regenerative medicine. However, most of the homogeneous and isotropic hydrogels cannot fully emulate the hierarchical properties of natural ECM, including the dynamically spatiotemporal distributions of biochemical and biomechanical signals. Biomimetic hierarchical nanocomposite hydrogels have emerged as potential candidates to better recapitulate natural ECM by introducing various nanostructures, such as nanoparticles, nanorods, and nanofibers. Moreover, the nanostructures in nanocomposite hydrogels can be engineered as stimuli-responsive actuators to realize the desirable control of hydrogel properties, thereby manipulating the behaviors of the encapsulated cells upon appropriate external stimuli. In this review, we present a comprehensive summary of the main strategies to construct biomimetic hierarchical nanocomposite hydrogels with an emphasis on the rational design of local hydrogel properties and their stimuli-responsibility. We then highlight cell fate decisions in engineered nanocomposite niches and their recent development and challenges in biomedical applications.

Reconstruction of a mandibular defect is challenging, with high expectations for both functional and esthetic results. Bone morphogenetic protein-2 (BMP-2) is an essential growth factor in osteogenesis, but the efficacy of the BMP-2-based strategy on the bone regeneration of mandibular defects has not been well-investigated. In addition, the underlying mechanisms of BMP-2 that drives the bone formation in mandibular defects remain to be clarified. Here, we utilized BMP-2-loaded hydrogel to augment bone formation in a critical-size mandibular defect model in rats. We found that implantation of BMP-2-loaded hydrogel significantly promoted intramembranous ossification within the defect. The region with new bone triggered by BMP-2 harbored abundant CD31+ endomucin+ type H vessels and associated osterix (Osx)+ osteoprogenitor cells. Intriguingly, the new bone comprised large numbers of skeletal stem cells (SSCs) (CD51+ CD200+) and their multi-potent descendants (CD51+ CD105+), which were mainly distributed adjacent to the invaded blood vessels, after implantation of the BMP-2-loaded hydrogel. Meanwhile, BMP-2 further elevated the fraction of CD51+ CD105+ SSC descendants. Overall, the evidence indicates that BMP-2 may recapitulate a close interaction between functional vessels and SSCs. We conclude that BMP-2 augmented coupling of angiogenesis and osteogenesis in a novel and indispensable way to improve bone regeneration in mandibular defects, and warrants clinical investigation and application.

Bufalin (buf) has poor solubility in aqueous solution, poor tumor targeting, and many non-specific toxic and side effects. The advantages of high-molecular-weight polymer conjugates are that they can improve the water solubility of buf, prolong plasma half-life, and reduce non-specific toxicity. A novel water-soluble polymer–drug conjugate with buf and fluorescein pendants was prepared by the combination of reversible addition-fragmentation transfer (RAFT) polymerization and click chemistry. Its anticancer performance and cellular uptake behavior against liver cancer were investigated in vitro. The polymer–buf conjugates exhibit controlled release and tumor-targeting capabilities, showing promise for clinical applications.

Background: Osteoarthritis (OA) is one of the main causes of disability in the elderly population, accompanied by a series of underlying pathologic changes, such as cartilage degradation, synovitis, subchondral bone sclerosis, and meniscus injury. The present study aimed to identify key genes, signaling pathways, and miRNAs in knee OA associated with the entire joint components, and to explain the potential mechanisms using computational analysis.Methods: The differentially expressed genes (DEGs) in cartilage, synovium, subchondral bone, and meniscus were identified using the Gene Expression Omnibus 2R (GEO2R) analysis based on dataset from GSE43923, GSE12021, GSE98918, and GSE51588, respectively and visualized in Volcano Plot. Venn diagram analyses were performed to identify the overlapping DEGs (overlapping DEGs) that expressed in at least two types of tissues mentioned above. Gene Ontology (GO) enrichment analysis, Kyoto Encyclopedia of Genes and Genomes (KEGG) analysis, protein-protein interaction (PPI) analysis, and module analysis were conducted. Furthermore, qRT-PCR was performed to validate above results using our clinical specimens.Results: As a result, a total of 236 overlapping DEGs were identified, of which 160 were upregulated and 76 were downregulated. Through enrichment analysis and constructing the PPI network and miRNA-mRNA network, knee OA-related key genes, such as HEY1, AHR, VEGFA, MYC, and CXCL12 were identified. Clinical validation by qRT-PCR experiments further supported above computational results. In addition, knee OA-related key miRNAs such as miR-101, miR-181a, miR-29, miR-9, and miR-221, and pathways such as Wnt signaling, HIF-1 signaling, PI3K-Akt signaling, and axon guidance pathways were also identified. Among above identified knee OA-related key genes, pathways and miRNAs, genes such as AHR, HEY1, MYC, GAP43, and PTN, pathways like axon guidance, and miRNAs such as miR-17, miR-21, miR-155, miR-185, and miR-1 are lack of research and worthy for future investigation.Conclusion: The present informatic study for the first time provides insight to the potential therapeutic targets of knee OA by comprehensively analyzing the overlapping genes differentially expressed in multiple joint components and their relevant signaling pathways and interactive miRNAs.

The progress of construction and safe production in mining, water conservancy, tunnels, and other types of deep underground engineering is seriously affected by rockburst disasters. This makes it essential to accurately predict rockburst intensity. In this paper, the ratio of maximum tangential stress of surrounding rock to rock uniaxial compressive strength (σθ/σc), the ratio of rock uniaxial compressive strength to rock uniaxial tensile strength (σc/σt), and the elastic energy index of rock (Wet) were chosen as input indices, and rockbursts were graded as level I (none rockburst), level II (light rockburst), level III (medium rockburst), and level IV (strong rockburst). A total of 104 groups of rockburst engineering samples, collected widely from around the world, were divided into a training set (84 groups of samples) and a test set (20 groups of samples). Based on the kernel principal component analysis (KPCA), the adaptive particle swarm optimization (APSO) algorithm, and the support vector machine (SVM), the KPCA-APSO-SVM model was established. The proposed model showed satisfactory classification performance: the prediction accuracies of the training set and test set were 98.81% and 95%, respectively. In addition, the trained prediction model was applied to five rockburst engineering cases and compared with the BP neural network model, SVM model, and APSO-SVM model. The comparative results show that the KPCA-APSO-SVM model has a higher prediction accuracy; as such, it provides a new reliable method for rockburst prediction.

In this study, new organic-inorganic g-C3N4/CoAl-LDH nanocomposites were prepared and introduced to fabricate photocatalytic cement mortars by internal mixing, coating, and spraying. The photocatalytic depollution of both g-C3N4/CoAl-LDH and cement mortars was assessed by NOx degradation reaction under UV-visible light irradiation. The study results suggested that the degradation efficiency of g-C3N4/CoAl-LDH nanocomposites improved with an increase in g-C3N4 content. The g-C3N4/CoAl-LDH1.5 nanocomposite displayed the highest NOx degradation capacity, which was about 1.23 and 3.21 times that of pure g-C3N4 and CoAl-LDH, respectively. The photocatalytic cement mortars which were all fabricated using different approaches could effectively degrade the target pollutants and exhibited significant compatibility between g-C3N4/CoAl-LDH and cementitious substrate. Among them, the coated mortars showed strong resistance to laboratory-simulated wearing and abrasion with a small decrease in degradation rate.

The static load carrying capacity of a noncorroded reinforced concrete (RC) simply supported beam is numerically simulated by ABAQUS software, and the reliability of the finite element model is verified by comparing with the test results. Based on the above model, the macroscopic mechanical properties of the beam under different degrees of corrosion are calculated. In the calculation, the degradation of the bond-slip performance and mechanical properties of corroded rebars and the coupling effect on the bearing capacity and ductility degradation of the beams are considered. The results show that, under conditions of slight corrosion, the degradation of bond-slip performance between the rebar and concrete has no significant influence on the bearing capacity of the beam, while the degradation of the corroded rebar had a significant effect. Under moderate and severe corrosion conditions, the bearing capacity and ductility degradation caused by bond-slip are dominant in the mechanical property degradation of the beam. Overall, the macroscopic mechanical properties of the corroded beam are influenced by the coupling effect of bond-slip degradation and the mechanical property degradation of the rebar. With the increase in the corrosion rate, the bearing capacity and ductility of the beam are decreased, and its brittleness is increased.