Search

This study explores the experiences of a cohort of young, educated, internationally mobile Chinese consumers with cheese and other dairy products, and how these experiences shape their behavior toward cheese products. In total, 41 Chinese students studying at an Irish university participated in 5 focus groups (n = 41, n = 7-10). Thematic analysis identified important factors that influence consumer behaviors regarding cheese products. Individuals' expectations toward cheese were embedded in their knowledge structures, which were constructed from previous experience. Participants had general positive expectations toward cheese due to associations with western-style foods and nostalgia; however, direct eating experience determined long-term behavior. When making a purchase decision, choice motives were weighed and negotiated to establish a fundamental driving factor for purchase. Perceived probability of choice motive fulfillment was important in determining purchase decisions, with many participants having low perceived ability to select cheese and limited motivation to engage with cheese due to limited perceived relevance of cheese to their daily food life. Individuals' innovativeness was an important factor that influences their openness to cheese products when moving beyond familiar foods. Opportunities exist such as using nostalgic cues as marketing tools to increase consumers' interest in cheese or combining cheese with Chinese food to increase perceived relevance of cheese to their daily food life. Providing information at point of purchase could reduce the disconnect between expectation and actual experience, and innovative cheese products may be developed to better fulfill important choice motives.

Nisin is a bacteriocin that is globally employed as a biopreservative in food systems to control gram-positive, and some gram-negative, bacteria. Here we tested the bioactivity of nisin A-producing Lactococcus lactis NZ9700 and producers of bioengineered variants thereof against representatives of the gram-negative genus Thermus, which has been associated with the pink discoloration defect in cheese. Starting with a total of 73 nisin variant-producing Lactococcus lactis, bioactivity against Thermus was assessed via agar diffusion assays, and 22 variants were found to have bioactivity greater than or equal to that of the nisin A-producing control. To determine to what extent this enhanced bioactivity was attributable to an increase in specific activity, minimum inhibitory concentrations were determined using the corresponding purified form of these 22 nisin A derivatives. From these experiments, nisin M17Q and M21F were identified as peptides with enhanced antimicrobial activity against the majority of Thermus target strains tested. In addition, several other peptide variants were found to exhibit enhanced specific activity against a subset of strains.

peer-reviewed The objective of this study was to investigate the effect of adding different levels of a thermoresistant protease produced by a Pseudomonas fluorescens strain to milk on the manufacture and quality of Cheddar cheese. Fresh raw milk was collected, standardized, and pasteurized at 72°C for 15 s, and the enzyme was added to give a protease activity of 0.15 or 0.60 U/L (treatments P1 and P4, respectively), while one sample had no enzyme added (control). Milk was stored at 4°C for 48 h and Cheddar cheese was manufactured after 0 and 48 h of storage. Results indicated that the protease was active in milk during 48 h of storage; however, its effect on milk composition was minimal. The protein that was preferentially hydrolyzed by the protease over storage was β-casein, followed by κ-casein. The mean cheese yield and recovery of fat and protein obtained for all cheeses were not affected by protease activity. The protease showed low activity during cheese manufacture, possibly because of unfavorable conditions, including low pH. One of the factors that might have influenced protease activity was the pH of the curd (approximately 6.55 after acidification and 5.35 at milling), which was lower than that at which the enzyme would have optimum activity (pH 7 to 9). Consequently, the composition, pH, patterns of proteolysis, and hardness of all cheeses produced were similar and in accordance with values expected for that type of cheese, independently of the protease activity level. However, slight increases in proteolysis were observed in P4 cheeses and produced using milk stored for 48 h. Both the P1 and P4 cheeses had higher concentrations of free amino acids (FAA) compared with the control, whereas urea-PAGE electrophoretograms indicated a greater breakdown of caseins in the P4 cheese samples, which may be related to possible increases in numbers of proteolytic bacteria in milk during storage. Therefore, the thermoresistant psychrotrophic bacterial protease(s) tested in this study may affect the manufacture or quality of Cheddar cheese during ripening to a relatively limited extent. However, controlling initial levels of proteolytic bacteria in raw milk remains essential, because proteolysis affects the development of flavor and texture in cheese.

Carotenoids are isoprenoids widely distributed in foods that have been always part of the diet of humans. Unlike the other so-called food bioactives, some carotenoids can be converted into retinoids exhibiting vitamin A activity, which is essential for humans. Furthermore, they are much more versatile as they are relevant in foods not only as sources of vitamin A, but also as natural pigments, antioxidants, and health-promoting compounds. Lately, they are also attracting interest in the context of nutricosmetics, as they have been shown to provide cosmetic benefits when ingested in appropriate amounts. In this work, resulting from the collaborative work of participants of the COST Action European network to advance carotenoid research and applications in agro-food and health (EUROCAROTEN, www.eurocaroten.eu, https://www.cost.eu/actions/CA15136/#tabs|Name:overview) research on carotenoids in foods and feeds is thoroughly reviewed covering aspects such as analysis, carotenoid food sources, carotenoid databases, effect of processing and storage conditions, new trends in carotenoid extraction, daily intakes, use as human, and feed additives are addressed. Furthermore, classical and recent patents regarding the obtaining and formulation of carotenoids for several purposes are pinpointed and briefly discussed. Lastly, emerging research lines as well as research needs are highlighted., This article is based upon work from COST Action (European network to advance carotenoid research and applications in agro-food and health, EUROCAROTEN, CA15136, www.eurocaroten.eu, https://www.cost.eu/actions/CA15136/#tabs|Name:overview) supported by COST (European Cooperation in Science and Technology, http://www.cost.eu/).

The untargeted metabolic profiles of ripened Maasdam cheese samples prepared from milk derived from three herd groups, fed: (1) indoors on total mixed ration (TMR), or outdoors on (2) grass only pasture (GRA) or (3) grass and white clover pasture (CLO) were studied using high resolution nuclear magnetic resonance ( 1H NMR), high resolution magic angle spinning nuclear magnetic resonance ( 1H HRMAS NMR) and headspace (HS) gas chromatography mass spectrometry (GC-MS). A total of 31 compounds were identified using 1H NMR and 32 volatile compounds including 7 acids, 5 esters, 4 alcohols, 4 ketones, 4 sulfur compounds, 2 aldehydes, 3 hydrocarbons, 2 terpenes and a lactone were identified using GC–MS in Maasdam cheeses ripened for 97-d. On comparing the 1H NMR metabolic profiles, TMR-derived cheese had higher levels of citrate compared to GRA-derived cheese. The toluene content of cheese was significantly higher in GRA or CLO compared to TMR cheeses and dimethyl sulfide was identified only in CLO-derived cheese samples as detected using HS GC–MS. These compounds are proposed as indicator compounds for Maasdam cheese derived from pasture-fed milk. Clear differences between outdoor or indoor feeding systems in terms of cheese metabolites were detected in the lipid phase, as indicated by principal component analysis (PCA) from 1H HRMAS NMR spectra, although differences based on PCA of all 1H NMR spectra and HS-GC–MS were less clear. Overall, this study presented the metabolite profile and identified specific compounds which may be useful for discriminating between ripened Maasdam cheese and related cheese varieties manufactured from indoor or outdoor herd-feeding systems.

Background The rate or extent of whey expulsion or syneresis from cheese curds during stirring in-vat determines curd moisture levels, which subsequently influences cheese moisture content. The outward migration of whey depends on curd contraction and on the structure of the pores permitting whey movement. Curd syneretic properties are one of the least understood areas of cheese science, particularly when milk of varying composition is used. Scope and approach This review provides an insight into the mechanisms of curd formation and curd syneresis, and factors influencing syneretic properties in unconcentrated and concentrated milk and appraises syneresis measurement methods in terms of their relative strengths and weaknesses. Key findings and conclusions Direct measurement of moisture content of curds is recommended as a simple and reliable method for measurement of syneresis of industrial relevance and, although inline measurement for curd moisture prediction has been a significant development in the last decade, its application to commercial production is still limited. A review of previous studies found that experimental conditions and methodologies used to measure syneresis vary widely, making it difficult to compare data between studies. Overall, interactions between process variables employed determines whether syneresis is accentuated or inhibited, and this can be exploited by cheese producers to attain target curd moisture contents by varying process parameters, particularly when milk is concentrated prior to cheese-making. Furthermore, further studies should be focused on endogenous syneresis and casein network rearrangement to clearly elucidate this mechanism and its influence on macrosyneresis under dynamic conditions.

peer-reviewed The effects of the independent variables protein concentration (4–6%), coagulum cut size (6–18 mm3), and coagulation temperature (28–36°C) on curd moisture loss during in-vat stirring were investigated using response surface methodology. Milk (14 kg) in a cheese vat was rennet coagulated, cut, and stirred as per semihard cheesemaking conditions. During stirring, the moisture content of curd samples was determined every 10 min between 5 and 115 min after cutting. The moisture loss kinetics of curds cut to 6 mm3 followed a logarithmic trend, but the moisture loss of curds from larger cut sizes, 12 or 18 mm3, showed a linear trend. Response surface modeling showed that curd moisture level was positively correlated with cut size and negatively correlated with milk protein level. However, coagulation temperature had a significant negative effect on curd moisture up to 45 min of stirring but not after 55 min (i.e., after cooking). It was shown that curds set at the lower temperature had a slower syneresis rate during the initial stirring compared with curds set at a higher temperature, which could be accelerated by reducing the cut size. This study shows that keeping a fixed cut size at increasing protein concentration decreased the level of curd moisture at a given time during stirring. Therefore, to obtain a uniform curd moisture content at a given stirring time at increasing protein levels, an increased coagulum cut size is required. It was also clear that breakage of the larger curd particles during initial stirring can also significantly influence the curd moisture loss kinetics. Both transmission and scanning electron micrographs of cooked curds (i.e., after 45 min of stirring) showed that the casein micelles were fused at a higher degree in curds coagulated at 36°C compared with 28°C, which confirmed that coagulation temperature causes a marked change in curd microstructure during the earlier stages of stirring. The present study showed the dynamics of curd moisture content during stirring when using protein-concentrated milk at various set temperatures and cut sizes. This provides the basis for achieving a desired curd moisture loss during cheese manufacture using protein-concentrated milk as a means of reducing the effect of seasonal variation in milk for cheesemaking.

Micellar casein concentrate (MCC) of high casein content, (93.64 % of total protein), was produced by microfiltration of pasteurised skim milk. Cheesemilk of typical (1×) or high (1.5×) casein content were formulated from MCC which received either: no further heat treatment; pasteurisation (72 °C×15 s) or high heat treatment (90 °C×15 s), prior to combination with other membrane streams and cream. Cheddar cheeses were manufactured in triplicate and ripened for 180 days. Cheeses made from pasteurised or high heat treated MCC had similar pH as well as comparable flowability, hardness and volatile profiles over 180 days of ripening. On increasing cheesemilk casein content, levels of primary proteolysis in resultant cheeses decreased, and pH and hardness levels increased. Overall, increasing the heat treatment temperature from 72 to 90 °C for extension of the microbial shelf life of MCC does not impair the texture, functionality and volatile profile of resultant Cheddar cheeses.

The focus of the global cheese industry on accessing new markets for cheese is currently driving a greater need for innovation in cheese products. Research to date suggests that, for example, East Asian consumers prefer cheeses that have a soft texture, with mild and milky flavors. Strategies for achieving such cheese characteristics are reviewed in this article. For example, incorporation of polysaccharides into cheese results in cheese with higher moisture levels and softer textures; this also results in modification of other properties such as adhesiveness, meltability and flavor release. Hydrated polysaccharides may be considered as filler particles within cheese matrices, and therefore filled gel models with suitable filler particles can be used to establish the effect of filler volume, size and surface properties on the fractural and rheological properties of cheese matrices, thus guiding the use of polysaccharides. Addition of plant proteins such as soy and pea protein can also result in cheeses with softer texture. Furthermore, it has been suggested that heat-induced gelation of soy or pea protein with casein results in a gel structure consisting of two independent protein gels, thus facilitating the design of bespoke structures by adjusting the ratio of the two proteins. Finally, it is proposed that incorporation of ingredients with sensory properties familiar to East and Southeast Asian consumers and with the capacity to achieve bespoke textures offer potential for the development of cheese products for consumers in these markets.

Carotenoids are isoprenoids widely distributed in foods that have been always part of the diet of humans. Unlike the other so-called food bioactives, some carotenoids can be converted into retinoids exhibiting vitamin A activity, which is essential for humans. Furthermore, they are much more versatile as they are relevant in foods not only as sources of vitamin A, but also as natural pigments, antioxidants, and health-promoting compounds. Lately, they are also attracting interest in the context of nutricosmetics, as they have been shown to provide cosmetic benefits when ingested in appropriate amounts. In this work, resulting from the collaborative work of participants of the COST Action European network to advance carotenoid research and applications in agro-food and health (EUROCAROTEN, www.eurocaroten.eu, https://www.cost.eu/actions/CA15136/#tabs|Name:overview) research on carotenoids in foods and feeds is thoroughly reviewed covering aspects such as analysis, carotenoid food sources, carotenoid databases, effect of processing and storage conditions, new trends in carotenoid extraction, daily intakes, use as human, and feed additives are addressed. Furthermore, classical and recent patents regarding the obtaining and formulation of carotenoids for several purposes are pinpointed and briefly discussed. Lastly, emerging research lines as well as research needs are highlighted.

To study the effect of removing β-casein of cheesemilk on cheese manufacture, cheesemilk was formulated from low heat skim milk powder (LH CM), micellar casein concentrate with 1.83% β-casein reduction (MCC CM) and β-casein-reduced micellar casein concentrate with 4.25% β-casein reduction (LB CM) or high heat treatment (HHT; 120 °C, 15 s) LB CM to manufacture Emmental cheeses. MCC- and LB CM had similar rennet coagulation properties and similar compositions and yield in the resultant cheeses. Compared with LB CM, HHT LB CM had an increased level of denatured whey protein and a reduced, yet acceptable, curd firming rate. Higher fat losses, but lower protein losses, from cheesemilk to whey in HHT LB cheeses resulted in a similar yield compared with LB CM cheese. Overall, it was possible to remove β-casein from cheesemilk or apply high heat treatment to whey protein reduced milk without adversely affecting cheese composition and yield.

The solubility of carbon dioxide (CO2) in the moisture and protein components of cheese matrices and the influence of changing pH, salt and temperature levels remains unclear. In this study, model casein matrices were prepared, by renneting of micellar casein concentrate (MCC), with modulation of salt and pH levels by adding salt and glucono delta-lactone, respectively, to the MCC solutions prior to renneting. Different moisture-to-protein levels were achieved by freeze-drying, incubation of samples at different relative humidities, or by applying varying pressures during gel manufacture. The CO2 solubility of samples decreased linearly with both increasing temperature and salt-in-moisture content, whereas solubility of CO2 increased with increasing pH. A non-linear relationship was observed between CO2 solubility and the moisture-to-protein ratio of experimental samples. Overall, such knowledge may be applied to improve the quality and consistency of eye-type cheese, and in particular to avoid development of undesirable slits and cracks.

This study investigated the effect of centrifugation (9,000 × g, 50°C, flow rate = 1,000 L/h), as well as the incorporation of high-heat-treated (HHT) centrifugate into cheese milk on the composition, texture, and ripening characteristics of Maasdam cheese. Neither centrifugation nor incorporation of HHT centrifugate into cheese milk had a pronounced effect on the compositional parameters of any experimental cheeses, except for moisture and moisture in nonfat substance (MNFS) levels. Incorporation of HHT centrifugate at a rate of 6 to 10% of the total milk weight into centrifuged milk increased the level of denatured whey protein in the cheese milk and also increased the level of MNFS in the resultant cheese compared with cheeses made from centrifuged milk and control cheeses; moreover, cheese made from centrifuged milk had ∼3% higher moisture content on average than control cheeses. Centrifugation of cheese milk reduced the somatic cell count by ∼95% relative to the somatic cell count in raw milk. Neither centrifugation nor incorporation of HHT centrifugate into cheese milk had a significant effect on age-related changes in pH, lactate content, and levels of primary and secondary proteolysis. However, the value for hardness was significantly lower for cheeses made from milk containing HHT centrifugate than for other experimental cheese types. Overall, centrifugation appeared to have little effect on composition, texture, and ripening characteristics of Maasdam cheese. However, care should be taken when incorporating HHT centrifugate into cheese milk, because such practices can influence the level of moisture, MNFS, and texture (particularly hardness) of resultant cheeses. Such differences may have the potential to influence subsequent eye development characteristic, although no definitive trends were observed in the present study and further research on this is recommended.

In this study, application of an electrical field to facilitate the migration of norbixin molecules through rennet-induced micellar casein concentrate (MCC) and agar gels was evaluated. To determine the effect of selected parameters on norbixin penetration through the renneted casein gels, MCC, as a curd-like structure, was used to simplify the study of the process and evaluate the impact of each parameter on the migration of norbixin molecules separately. The physicochemical properties of norbixin solutions were characterized, followed by evaluation of the effects of changing gel composition on colorant mobility—influenced by an electrical field. Multi-angle dynamic light scattering enabled size measurement of norbixin solutions. A strong negative charge (−53.4 to −73.4 mV) was observed at all pH values examined. Localization of norbixin molecules within the aqueous phase was shown by confocal laser scanning microscopy. Norbixin solutions, characterized by LUMiSizer and light microscopy, showed the formation of aggregates (30–50 μm) in the presence of CaC12. Reducing pH and increasing calcium content considerably decreased norbixin penetration through the gels. The penetration rate of norbixin was considerably reduced (~ 60%) in the presence of 2% of calcium chloride. By reducing the pH from 6.58 to 5.37 and 6.60 to 5.30, the penetration rate of color through the gels containing 7.5 and 15% protein was reduced by ~90 and 80%, respectively. However, as salt concentrations increased (0% to 4%), the penetration rate of the colorant through MCC gels of 15% protein increased by 60%. Overall, this work shows that applying an electrical field is a promising approach which may considerably increase the migration rate of colorant through rennet-induced casein gels.

peer-reviewed The effect of buttermilk powder addition post-curd formation or buttermilk addition to cheese milk on total and individual phospholipid content, chemical composition, enzyme activity, microbial populations and microstructure within Cheddar-style cheese was investigated. Buttermilk or buttermilk powder addition resulted in significant increases in total phospholipid content and their distribution throughout the cheese matrix. Addition of 10% buttermilk powder resulted in higher phospholipid content, moisture, pH and salt in moisture levels, and lower fat, fat in dry matter, L. helveticus and non-starter bacteria levels in cheeses. Buttermilk powder inclusion resulted in lower pH 4.6/Soluble Nitrogen (SN) levels and significantly lower free amino acid levels in 10% buttermilk powder cheeses. Buttermilk addition provided a more porous cheese microstructure with greater fat globule coalescence and increased free fat pools, while also increasing moisture and decreasing protein, fat and pH levels. Addition of buttermilk in liquid or powdered form offers potential for new cheeses with associated health benefits.

The effect of varying cook temperature (40 or 50 °C) and salting method (dry or brine salting) on bacterial viability, enzymatic activity and chemical composition in cheeses made using Streptococcus thermophilus and Lactobacillus helveticus were investigated. Dry salting resulted in decreased cell viability of L. helveticus, increased lactate dehydrogenase activity and increased free amino acid levels, compared with brine salted cheeses, irrespective of cook temperature. A cook temperature of 50 °C resulted in reduced primary proteolysis and increased pH in comparison with that in cheeses cooked to 40 °C. Salting method influenced moisture content with higher levels in brine salted cheeses; cook temperature was also influential with higher cook temperature resulting in lower moisture within each salting method. Variations in manufacture procedure can allow for the development of cheese varieties with novel flavour and texture profiles using existing Cheddar or Swiss-style manufacturing facilities.

The individual roles of hydrolysis of αS1- and β-caseins, and calcium solubilization on the fracture properties of semi-hard cheeses, such as Maasdam and other eye-type cheeses, remain unclear. In this study, the hydrolysis patterns of casein were selectively altered by adding a chymosin inhibitor to the curd/whey mixture during cheese manufacture, by substituting fermentation-produced bovine chymosin (FPBC) with fermentation-produced camel chymosin (FPCC), or by modulating ripening temperature. Moreover, the level of insoluble calcium during ripening was quantified in all cheeses. Addition of a chymosin inhibitor, substitution of FPBC with FPCC, or ripening of cheeses at a consistent low temperature (8 °C) decreased the hydrolysis of αS1-casein by ~95%, ~45%, or ~30%, respectively, after 90 d of ripening, whereas ~35% of β-casein was hydrolysed in that time for all cheeses, except for those ripened at a lower temperature (~17%). The proportion of insoluble calcium as a percentage of total calcium decreased significantly from ~75% to ~60% between 1 and 90 d. The rigidity or strength of the cheese matrix was found to be higher (as indicated by higher fracture stress) in cheeses with lower levels of proteolysis or higher levels of intact caseins, primarily αS1-casein. However, contrary to the expectation that shortness of cheese texture is associated with αS1-casein hydrolysis, fracture strain was significantly positively correlated with the level of intact β-casein and insoluble calcium content, indicating that the cheeses with low levels of intact β-casein or insoluble calcium content were more likely to be shorter in texture (i.e., lower fracture strain). Overall, this study suggests that the fracture properties of cheese can be modified by selective hydrolysis of caseins, altering the level of insoluble calcium or both. Such approaches could be applied to design cheese with specific properties.

Colored Cheddar cheeses are prepared by adding an aqueous annatto extract (norbixin) to cheese milk; however, a considerable proportion (∼20%) of such colorant is transferred to whey, which can limit the end use applications of whey products. Different geographical regions have adopted various strategies for handling whey derived from colored cheeses production. For example, in the United States, whey products are treated with oxidizing agents such as hydrogen peroxide and benzoyl peroxide to obtain white and colorless spray-dried products; however, chemical bleaching of whey is prohibited in Europe and China. Fundamental studies have focused on understanding the interactions between colorants molecules and various components of cheese. In addition, the selective delivery of colorants to the cheese curd through approaches such as encapsulated norbixin and microcapsules of bixin or use of alternative colorants, including fat-soluble/emulsified versions of annatto or beta-carotene, has been studied. This review provides a critical analysis of pertinent scientific and patent literature pertaining to colorant delivery in cheese and various types of colorant products on the market for cheese manufacture, and also considers interactions between colorant molecules and cheese components; various strategies for elimination of color transfer to whey during cheese manufacture are also discussed.

The objective of this study was to identify the carotenoids imparting the orange colour to the rind, and pale yellow color to the core, of selected smear-ripened cheeses. The cheeses investigated were Charloe, Ashbrook, Taleggio, and Limburger, and were sourced from artisanal markets. Samples of the rind and core were extracted using non-polar solvents, followed by saponification to hydrolyze triglycerides to remove fatty acids, and to release carotenoid esters. Extracts were tested using ultra-high pressure liquid chromatograph-diode array detector-high resolution mass spectrometry (UHPLC-DAD-MS and -MS/MS), and identities of α- and β-carotene, lycopene, and β-cryptoxanthin confirmed with authentic standards. β-Carotene was the predominant species in both the rind and core, absorbing ~70% of the signal at 450 nm in all cheese extracts tested, as well as minor quantities of β-cryptoxanthin and α-carotene. Carotenoids unique to the rind included lycopene as well as the rare bacterial carotenoids previously identified in bacterial isolates of cheeses (i.e. decaprenoxanthin, sarcinaxanthin, and echinenone). This is the first detailed characterisation of carotenoids extracted directly from smear-ripened cheeses, and reveals that smear-ripened cheese can contribute both provitamin A carotenoids as well as C50 carotenoids to the human diet.

Liposome-encapsulated ethylenediaminetetraacetic acid (EDTA) was incorporated into a model miniature Gouda-type cheese (20 g) in order to assess its effect on rennet gelation, starter viability, pH, and moisture content. EDTA was encapsulated within 2 different food-grade proliposome preparations, Pro-Lipo Duo and Pro-Lipo C (50% and 40% unsaturated soybean phospholipids and 50% and 60% aqueous medium, respectively), using the following high-shear technologies: Ultra-Turrax (5000 rpm), 2-stage homogenization (345 bar), or microfluidization (690 bar). Liposome size distribution was affected by the high-shear technology employed with the proportion of large vesicles (>100 nm) decreasing in the order microfluidization < 2-stage homogenization < Ultra-Turrax. All EDTA-containing liposomes were stable during 28 d refrigerated storage, with no significant (P ≤ 0.05) change in size distribution or EDTA entrapment efficiency (%EE). Liposome composition affected the entrapment of EDTA, with Pro-Lipo C having a significantly greater %EE than Pro-Lipo Duo, 63% and 54%, respectively. For this reason, Pro-Lipo C EDTA liposomes, with and without EDTA, were incorporated into model miniature Gouda-type cheese. Addition of liposome-encapsulated EDTA to milk during cheese making did not impact pH or rennet gel formation. No differences in composition or pH were evident in liposome-treated cheeses. The results of this study show that the incorporation of liposome-encapsulated EDTA into milk during cheese manufacture did not affect milk fermentation, moisture content, or pH, suggesting that this approach may be suitable for studying the effects of calcium equilibrium on the texture of brine-salted cheeses.

Nonstarter lactic acid bacteria are commonly implicated in undesirable gas formation in several varieties, including Cheddar, Dutch-, and Swiss-type cheeses, primarily due to their ability to ferment a wide variety of substrates. This effect can be magnified due to factors that detrimentally affect the composition or activity of starter bacteria, resulting in the presence of greater than normal amounts of fermentable carbohydrates and citrate. The objective of this study was to determine the potential for a facultatively heterofermentative Lactobacillus (Lactobacillus casei DPC6987) isolated from a cheese plant environment to promote gas defects in the event of compromised starter activity. A Swiss-type cheese was manufactured, at pilot scale and in triplicate, containing a typical starter culture (Streptococcus thermophilus and Lactobacillus helveticus) together with propionic acid bacteria. Lactobacillus helveticus populations were omitted in certain vats to mimic starter failure. Lactobacillus casei DPC6987 was added to each experimental vat at 4 log cfu/g. Cheese compositional analysis and X-ray computed tomography revealed that the failure of starter bacteria, in this case L. helveticus, coupled with the presence of a faculatively heterofermentative Lactobacillus (L. casei) led to excessive eye formation during ripening. The availability of excess amounts of lactose, galactose, and citrate during the initial ripening stages likely provided the heterofermentative L. casei with sufficient substrates for gas formation. The accrual of these fermentable substrates was notable in cheeses lacking the L. helveticus starter population. The results of this study are commercially relevant, as they demonstrate the importance of viability of starter populations and the control of specific nonstarter lactic acid bacteria to ensure appropriate eye formation in Swiss-type cheese.

The present study investigated the ability of spray dried single layer (SL) and layer-by-layer (LBL) high total solid emulsions with carbohydrate (trehalose) and non-carbohydrate (WPI) solids to stabilize carotenoids upon storage at 35 °C, 50 °C, and 65 °C. Carotenoid loss followed first order loss kinetics, and increased with increasing storage temperature. Rapid initial first order loss followed by a second, less rapid first order loss was observed. Storage of the systems above the T g reduced carotenoid loss in the initial first order loss. The loss of carotenoids in LBL system was more temperature dependent initially but SL system was more temperature dependent in the second first order loss step. LBL system showed slower loss rate of carotenoids in the initial first order loss step and at 65 °C in the second step. Carotenoid retention was significantly higher in LBL system upon storage at 65 °C. Industrial relevance Although layer-by-layer (LBL) technique has been known to produce emulsions with better stability towards environmental stresses, few have reported the application of LBL technique using systems with high total solids. The application of LBL technique on emulsion with high total solids and subsequent spray-drying of the emulsion in this manuscript will provide useful information to the food and pharmaceutical industries. The possibility to spray-dry such systems with high total solids producing high quality powders would be feasible to the industry as it greatly reduces production cost. The present study also reports on the carotenoid loss kinetics of dehydrated concentrated systems with carbohydrate and non-carbohydrate mixtures as wall materials and compares the ability of single layer (SL) and LBL systems in preventing the loss of the encapsulated carotenoids.

A cascade membrane filtration process including microfiltration (MF), ultrafiltration (UF) and reverse osmosis (RO) was used to fractionate skim milk into different streams. Significant quantities of lactose and minerals were removed to permeate after MF at 0.14 μm. Cheese milk, of similar casein content to the raw milk, was standardised simultaneously for casein, lactose, ash and total calcium from the membrane streams without requiring CaCl2 and lactose addition. Serum protein depleted cheese milk of typical casein content had similar rennet coagulability, cheese composition, texture and yield to the control; milk of 1.5 × casein content had a faster coagulation rate and resulted in cheese of lower moisture content. On a dry matter basis, the serum protein content of MF permeate concentrated by UF was significantly higher than that in cheese whey (51.54% versus 5.63–9.45%), with significantly lower contents of ash (0.95% versus 7.11–7.53%) and lactose (9.50% versus 61.98–70.35%).

Changes in the microstructure of semi-hard cheeses were observed in situ under tensile deformation by placing a microtensile stage directly under a confocal scanning laser microscope, and recording force/displacement data simultaneously. On tensile deformation, detachment of fat globules and their subsequent release from the cheese matrix were observed, suggesting that they are weakly bonded to or entrapped within the cheese matrix. Moreover, an inherent micro-defect was observed at a curd granule junction within the cheese matrix, which fractured along the curd granule junction under tensile deformation, suggesting that such micro-defects could be a key to the formation of undesirable slits or cracks. Furthermore, the fracture behaviour of semi-hard cheese varied with ripening temperature, coagulant type, and inhibition of residual chymosin activity. Overall, this study demonstrated the potential of dynamic in situ imaging of cheese microstructure for developing a greater understanding of the breakdown behaviour of cheese matrices.

peer-reviewed This study characterized the coagulation properties and defined the cutting window (CW; time between storage modulus values of 35 and 70 Pa) using rheometry for milk standardized to 4, 5, or 6% protein and set at 28, 32, or 36°C. Milks were standardized to a protein-to-fat ratio of approximately 1 by blending ultrafiltration retentate, skim milk, and whole milk. The internal curd microstructure for selected curd samples was analyzed with transmission electron microscopy and scanning electron microscopy. Lowering the coagulation temperature caused longer rennet coagulation time and time to reach storage modulus of 35 Pa, translating into a wider CW. It also led to a lower maximum curd-firming rate (MCFR) with lower firmness at 40 min at a given protein level. Increasing protein levels resulted in the opposite effect, although without an effect on rennet coagulation time at a given temperature. On coagulation at 28°C, milk with 5% protein resulted in a similar MCFR (∼4 Pa/min) and CW (∼8.25 min) compared with milk with 4% protein at 32°C, which reflects more standard conditions, whereas increasing milk to 6% protein resulted in more than doubling of the curd-firming rate (MCFR = 9.20 Pa/min) and a shorter CW (4.60 min). Gels set at 28°C had lower levels of rearrangement of protein network after 40 min compared with those set at 36°C. Protein levels, on the other hand, had no influence on the levels of protein network rearrangement, as indicated by loss tangent values. The internal structure of curd particles, as investigated by both scanning electron microscopy and transmission electron microscopy, appeared to have less cross-linking and smaller casein aggregates when coagulated at 28°C compared with 36°C, whereas varying protein levels did not show a marked effect on aggregate formation. Overall, this study showed a marked interactive effect between coagulation temperature and protein standardization of milk on coagulation properties, which subsequently requires adjustment of the CW during cheesemaking. Lowering of the coagulation temperature greatly altered the curd microstructure, with a tendency for less syneresis during cutting. Further research is required to quantify the changes in syneresis and in fat and protein losses to whey due to changes in the microstructure of curd particles arising from the different coagulation conditions applied to the protein-fortified milk.

peer-reviewed The non-starter microbiota of Cheddar cheese mostly comprises mesophilic lactobacilli, such as Lactobacillus casei, Lactobacillus paracasei, Lactobacillus rhamnosus, and Lactobacillus plantarum. These bacteria are recognized for their potential to improve Cheddar cheese flavor when used as adjunct cultures. In this study, three strains of L. paracasei (DPC2071, DPC4206, and DPC4536) were evaluated for their contribution to the enhancement and diversification of flavor in short-aged Cheddar cheese. The strains were selected based on their previously determined genomic diversity, variability in proteolytic enzyme activities and metabolic capability in cheese model systems. The addition of adjunct cultures did not affect the gross composition or levels of lipolysis of the cheeses. The levels of free amino acids (FAA) in cheeses showed a significant increase after 28 days of ripening. However, the concentrations of individual amino acids in the cheeses did not significantly differ except for some amino acids (aspartic acid, threonine, serine, and tryptophan) at Day 14. Volatile profile analysis revealed that the main compounds that differentiated the cheeses were of lipid origin, such as long chain aldehydes, acids, ketones, and lactones. This study demonstrated that the adjunct L. paracasei strains contributed to the development and diversification of compounds related to flavor in short-aged Cheddar cheeses.

Fermented foods, in particular, surface-ripened cheese, represent a model to explain the metabolic interactions which regulate microbial succession in complex environments. This study explains the role of individual species in a heterogeneous microbial environment, i.e., the exterior of surface-ripened cheese. Through whole-metagenome shotgun sequencing, it was possible to investigate the metabolic potential of the resident microorganisms and show how variations in the microbial populations influence important aspects of cheese ripening, especially flavor development. Overall, in addition to providing fundamental insights, this research has considerable industrial relevance relating to the production of fermented food with specific qualities., In this study, a young Cheddar curd was used to produce two types of surface-ripened cheese, using two commercial smear-culture mixes of yeasts and bacteria. Whole-metagenome shotgun sequencing was used to screen the microbial population within the smear-culture mixes and on the cheese surface, with comparisons of microorganisms at both the species and the strain level. The use of two smear mixes resulted in the development of distinct microbiotas on the surfaces of the two test cheeses. In one case, most of the species inoculated on the cheese established themselves successfully on the surface during ripening, while in the other, some of the species inoculated were not detected during ripening and the most dominant bacterial species, Glutamicibacter arilaitensis, was not a constituent of the culture mix. Generally, yeast species, such as Debaryomyces hansenii and Geotrichum candidum, were dominant during the first stage of ripening but were overtaken by bacterial species, such as Brevibacterium linens and G. arilaitensis, in the later stages. Using correlation analysis, it was possible to associate individual microorganisms with volatile compounds detected by gas chromatography-mass spectrometry in the cheese surface. Specifically, D. hansenii correlated with the production of alcohols and carboxylic acids, G. arilaitensis with alcohols, carboxylic acids and ketones, and B. linens and G. candidum with sulfur compounds. In addition, metagenomic sequencing was used to analyze the metabolic potential of the microbial populations on the surfaces of the test cheeses, revealing a high relative abundance of metagenomic clusters associated with the modification of color, variation of pH, and flavor development. IMPORTANCE Fermented foods, in particular, surface-ripened cheese, represent a model to explain the metabolic interactions which regulate microbial succession in complex environments. This study explains the role of individual species in a heterogeneous microbial environment, i.e., the exterior of surface-ripened cheese. Through whole-metagenome shotgun sequencing, it was possible to investigate the metabolic potential of the resident microorganisms and show how variations in the microbial populations influence important aspects of cheese ripening, especially flavor development. Overall, in addition to providing fundamental insights, this research has considerable industrial relevance relating to the production of fermented food with specific qualities.

peer-reviewed Centrifugation is a common milk pretreatment method for removal of Clostridium spores which, on germination, can produce high levels of butyric acid and gas, resulting in rancid, gassy cheese. The aim of this study was to determine the effect of centrifugation of milk, as well as incorporation of high heat-treated centrifugate into cheese milk, on the microbial and volatile profile of Maasdam cheese. To facilitate this, 16S rRNA amplicon sequencing in combination with a selective media-based approach were used to study the microbial composition of cheese during maturation, and volatile organic compounds within the cheese matrix were analyzed by HPLC and solid-phase microextraction coupled with gas chromatography–mass spectrometry. Both culture-based and molecular approaches revealed major differences in microbial populations within the cheese matrix before and after warm room ripening. During warm room ripening, an increase in counts of propionic acid bacteria (by ∼101.5 cfu) and nonstarter lactic acid bacteria (by ∼108 cfu) and a decrease in the counts of Lactobacillus helveticus (by ∼102.5 cfu) were observed. Lactococcus species dominated the curd population throughout ripening, followed by Lactobacillus, Propionibacterium, and Leuconostoc, and the relative abundance of these accounted for more than 99% of the total genera, as revealed by high-throughput sequencing. Among subdominant microflora, the overall relative abundance of Clostridium sensu stricto was lower in cheeses made from centrifuged milk than control cheeses, which coincided with lower levels of butyric acid. Centrifugation as well as incorporation of high heat-treated centrifugate into cheese milk seemed to have little effect on the volatile profile of Maasdam cheese, except for butyric acid levels. Overall, this study suggests that centrifugation of milk before cheesemaking is a suitable method for controlling undesirable butyric acid fermentation without significantly altering the levels of other volatile organic compounds of Maasdam cheese.

peer-reviewed This study investigated the differential effect of salt concentration in the outside and inside layers of brine salted cheeses on viability, culturability and enzyme activity of starter bacteria. The high-salt environment of the outside layer caused a sharp decrease in L. helveticus viability as measured by traditional plate counts. Remarkably, this was associated with lower release of intracellular enzymes (LDH), reduced levels of proteolysis and larger membrane integrity as measured by flow cytometry (FC) following classical Live/Dead staining. FC analysis of light scattering properties highlighted a significant reduction in size and granularity of the microbiota located in the cheese surface, suggestive of cell shrinkage and condensation of internal macromolecules probably due to hyperosmotic stress. The microbiota of the cheese surface were found to experience greater oxidative stress, as measured by FC analysis of the total levels of reactive oxygen species, compared to that of the interior layer. These results lead us to postulate that the physiology and health status of the microbiota were significantly different in the outer and inner layers of the cheese. The hyperosmotic environment of the outer layer resulted in reduced cell lysis, as measurable by assays based upon membrane integrity, but rather triggered cell death via mechanisms involving cell shrinkage and ROS-mediated damage of vital intracellular components. This study challenges the current thinking on how salt controls microbial activity in ripening cheese, especially in cheeses which are brine salted as local variations in biochemical ripening indices can differ significantly from the outside to the inside of a ripening cheese.

peer-reviewed The quality and commercial value of cheese are primarily determined by its physico-chemical properties (e.g., melt, stretch, flow, and color), specific sensory attributes (e.g., flavor, texture, and mouthfeel), usage characteristics (e.g., convenience), and nutritional properties (e.g., nutrient profile, bioavailability, and digestibility). Many of these functionalities are determined by cheese structure, requiring an appropriate understanding of the relationships between structure and functionality to design bespoke functionalities. This review provides an overview of a broad range of functional properties of cheese and how they are influenced by the structural organization of cheese components and their interactions, as well as how they are influenced by environmental factors (e.g., pH and temperature). This review was funded by the Dairy Levy Trust, Dublin, Ireland, Teagasc Walsh Fellowship program, Oak Park, Carlow, Ireland, and in part by Ornua, Dubin, Ireland. Prabin Lamichhane is currently in receipt of a Teagasc Walsh Fellowship (RMIS6259).

peer-reviewed The influence of buttermilk or buttermilk powder addition to cheese milk or cheese curds respectively on cheese functional properties, free fatty acid profiles and subsequent volatile and sensory characteristics was investigated. Buttermilk addition to cheese milk resulted in a softer cheese compared to other cheeses, with a significantly reduced flowability, while buttermilk powder addition had no influence on cheese firmness but cheese flowability was also reduced compared to the control cheese. Larger pools of free fat, higher levels of free fatty acids, volatile compounds and significant differences in sensory profiles associated with off-flavour were also observed with the addition of buttermilk to cheese milk. Application of light microscopy, using toluidine blue stain, facilitated the visualisation of fat globule structure and distribution within the protein matrix. Addition of 10% buttermilk powder resulted in significant increases in volatile compounds originating from proteolysis pathways associated with roasted, green aromas. Descriptive sensory evaluation indicated few differences between the 10% buttermilk powder and the control cheese, while buttermilk cheeses scored negatively for sweaty, barnyard aromas, oxidized and off flavors, correlating with associated volatile aromas. Addition of 10% buttermilk powder to cheese curds results in cheese comparable to the control Cheddar with some variations in volatile compounds resulting in a cheese with similar structural and sensory characteristics albeit with subtle differences in overall cheese flavor. This could be manipulated to produce cheeses of desirable quality, with potential health benefits due to increased phospholipid levels in cheese.

The strains Staphylococcus saprophyticus DPC5671 and Corynebacterium casei DPC5298 were applied in combination with Debaryomyces hansenii DPC6258 to the surface of young Cheddar cheese curd to obtain two different smear-ripened cheeses. A surface microbiota developed over the incubation period, comprising of both yeast and bacteria; pulsed field gel electrophoresis confirmed that the inoculated strains of S. saprophyticus DPC5671 or C. casei DPC5298 were the dominant bacterial strains on the surface of the cheese at the end of the ripening period. The smear cultures changed the appearance and aroma, which were significantly different from the control cheese. The approach presented in this study represents a method for the development of new cheese varieties with novel aromas within a short ripening time.

The quality of any type of cheese is without doubt influenced by the quality of the milk from which it is made, from microbiological, biochemical, sensory, and many other perspectives. Raw milk is an inherently variable starting point for cheese manufacture, with its composition, for example, being influenced by factors, such as stage of lactation, diet, and health status of the producing animal, which subsequently determines milk coagulation properties and cheese yield, composition and likely ripening. Protein standardization treatments may be applied to cheese milks to minimize resultant cheese compositional variability. Similarly, milk is also biochemically complex, with a wide range of indigenous enzymes, some of which, for example, plasmin and lipase, are variable in activity and susceptible to processes applied to the milk, while contributing to cheese ripening. Finally, raw milk may act as a vector for bacterial spores and also provides an excellent medium for growth of a wide range of microorganisms. As cheese milk is vulnerable to contamination at multiple points before entering the cheese vat, control of the same for cheese safety and quality is critical.

Cheese is a versatile nutrient-dense dairy product and it is of high importance to fully characterise its properties, e.g. texture and flavour, which contribute to the quality of this dairy food. These properties are substantially affected by the microstructure. This paper reviews recent developments in the study of microstructure of cheeses, using light microscopy (LM) and electron microscopy (EM) techniques, as well as the use of software to analyse microstructure images, i.e. micrographs, obtained. LM techniques used in the analyses of cheeses involve bright field, polarised, fluorescence and confocal scanning laser microscopy; whereas EM methods refer to scanning and transmission EM. Software used in microstructural image analyses is to quantify various components, such as protein and fat, and also to re-construct micrographs for further image processing. Finally, the use of microstructure techniques in the identification and localisation of bacterial cells within the cheese matrix is discussed.

The purpose of this study was to investigate the effects of pasture-based versus indoor total mixed ration (TMR) feeding systems on the chemical composition, quality characteristics, and sensory properties of full-fat Cheddar cheeses. Fifty-four multiparous and primiparous Friesian cows were divided into 3 groups (n = 18) for an entire lactation. Group 1 was housed indoors and fed a TMR diet of grass silage, maize silage, and concentrates; group 2 was maintained outdoors on perennial ryegrass only pasture (GRS); and group 3 was maintained outdoors on perennial ryegrass/white clover pasture (CLV). Full-fat Cheddar cheeses were manufactured in triplicate at pilot scale from each feeding system in September 2015 and were examined over a 270-d ripening period at 8°C. Pasture-derived feeding systems were shown to produce Cheddar cheeses yellower in color than that of TMR, which was positively correlated with increased cheese β-carotene content. Feeding system had a significant effect on the fatty acid composition of the cheeses. The nutritional composition of Cheddar cheese was improved through pasture-based feeding systems, with significantly lower thrombogenicity index scores and a greater than 2-fold increase in the concentration of vaccenic acid and the bioactive conjugated linoleic acid C18:2 cis-9,trans-11, whereas TMR-derived cheeses had significantly higher palmitic acid content. Fatty acid profiling of cheeses coupled with multivariate analysis showed clear separation of Cheddar cheeses derived from pasture-based diets (GRS or CLV) from that of a TMR system. Such alterations in the fatty acid profile resulted in pasture-derived cheeses having reduced hardness scores at room temperature. Feeding system and ripening time had a significant effect on the volatile profile of the Cheddar cheeses. Pasture-derived Cheddar cheeses had significantly higher concentrations of the hydrocarbon toluene, whereas TMR-derived cheese had significantly higher concentration of 2,3-butanediol. Ripening period resulted in significant alterations to cheese volatile profiles, with increases in acid-, alcohol-, aldehyde-, ester-, and terpene-based volatile compounds. This study has demonstrated the benefits of pasture-derived feeding systems for production of Cheddar cheeses with enhanced nutritional and rheological quality compared with a TMR feeding system.