Search

Cubic ZrV 2 O 7 thin films have been synthesized by sol-gel spin-coating method. The influences of annealing temperatures on the phase composition and morphology of ZrV 2 O 7 thin films were investigated using XRD, SEM, and EDX. Negative thermal expansion (NTE) and optical performances of cubic ZrV 2 O 7 thin films were analyzed using variable temperature XRD and UV–Vis spectroscopy. Results indicate that as-deposited ZrV 2 O 7 thin films have an amorphous structure with smooth and dense surface. Cubic ZrV 2 O 7 thin films were prepared after heat treatment at 720 °C for 1 h. It was found that the thin films contained V 2 O 5 impurity with the Zr: V = 1:2 precursor solution. Pure cubic ZrV 2 O 7 thin films were fabricated with the Zr: V = 1.75:2 precursor solution. Cubic ZrV 2 O 7 thin films show isotropic NTE in the temperature range of 100–700 °C. The coefficients of thermal expansion (CTEs) of ZrV 2 O 7 films along the a , b , and c axes are −6.88 × 10−6 °C−1, and the volumetric and linear CTEs are −20.56 × 10−6 °C−1 and -6.85 × 10−6 °C−1, respectively. The transmittance of cubic ZrV 2 O 7 thin film is approximately 80 %. [ABSTRACT FROM AUTHOR]

This study investigates the effects of ground tire rubber (GTR) on the cracking resistance of asphalt mortar from different analysis scales. Furthermore, the effectiveness of different fracture test methods was compared for GTR-modified asphalt mortar, including the indirect tensile cracking test (IDEAL-CT), disk-shaped compact tension test (DCT) and Illinois flexibility index test (I-FIT). To achieve this, a mesoscopic fracture test based on the SEM-Servo Plus device was proposed firstly to obtain the micro-parameters of constitutive models in discrete-element modelling (DEM). A unified fracture modelling procedure that can avoid any interference factors was carried out for comparative fracture analysis. Results from the tests and simulations show that rubber filler plays a positive role in enhancing the fracture properties of the asphalt mortar. The fracture energy measured by IDEAL-CT is almost 5–6 times of the DC(T) test and 1.5–2 times of the I-FIT test. It is not an inherent attribute of material and can only be regarded as a relative index for fracture resistance evaluation. The FI and CTindex obtained from the I-FIT and IDEAL-CT test show a weak correlation of fracture resistance, especially when comparatively evaluating the GTR-modified asphalt mortar with minor difference in filler content. [ABSTRACT FROM AUTHOR]

This study investigates the effects of ground tire rubber (GTR) on the cracking resistance of asphalt mortar from different analysis scales. Furthermore, the effectiveness of different fracture test methods was compared for GTR-modified asphalt mortar, including the indirect tensile cracking test (IDEAL-CT), disk-shaped compact tension test (DCT) and Illinois flexibility index test (I-FIT). To achieve this, a mesoscopic fracture test based on the SEM-Servo Plus device was proposed firstly to obtain the micro-parameters of constitutive models in discrete-element modelling (DEM). A unified fracture modelling procedure that can avoid any interference factors was carried out for comparative fracture analysis. Results from the tests and simulations show that rubber filler plays a positive role in enhancing the fracture properties of the asphalt mortar. The fracture energy measured by IDEAL-CT is almost 5–6 times of the DC(T) test and 1.5–2 times of the I-FIT test. It is not an inherent attribute of material and can only be regarded as a relative index for fracture resistance evaluation. The FI and CTindex obtained from the I-FIT and IDEAL-CT test show a weak correlation of fracture resistance, especially when comparatively evaluating the GTR-modified asphalt mortar with minor difference in filler content. [ABSTRACT FROM AUTHOR]

Orthorhombic Sc 2 (MoO 4) 3 nanofibers have been prepared by ethylene glycol assisted electrospinning method. The effects of annealing temperature, precursor concentration, spinning distance and solvent on the preparation of Sc 2 (MoO 4) 3 nanofibers were characterized by XRD, SEM, HRTEM, EDX and high-temperature XRD. XRD analysis shows as-prepared nanofibers are amorphous. Orthorhombic Sc 2 (MoO 4) 3 nanofibers can be fabricated after annealing at different temperatures in 500–800 °C for 2 h. The crystallinity of Sc 2 (MoO 4) 3 nanofibers improves and the nanofiber diameter decreases gradually as the annealing temperature increases. However, the nanofiber structure was destroyed at the annealing temperature above 700 °C. Higher precursor concentration results in a slight increase of diameter and decrease in destroying temperature of Sc 2 (MoO 4) 3 nanofibers. Spinning distance also affects the diameter of nanofibers, and the nanofiber diameter decreases as the distance increases. One-dimensional orthorhombic Sc 2 (MoO 4) 3 nanofibers exhibit anisotropic negative thermal expansion. In 25–700 °C, the coefficients of thermal expansion (CTE) of α a , α b and α c are −5.81 × 10−6 °C−1, 4.80 × 10−6 °C−1 and -4.33 × 10−6 °C−1, and the α l of Sc 2 (MoO 4) 3 nanofibers is −1.83 × 10−6 °C−1. [ABSTRACT FROM AUTHOR]

Negative thermal expansion (NTE) Sc2(MoO4)3 thin films were fabricated on quartz substrates via facile sol–gel spin coating technique. Effects of process parameters on the phase composition, morphology, thermal expansion behavior and optical property of the Sc2(MoO4)3 thin films were investigated. XRD analysis reveals that as-deposited Sc2Mo3O12 thin films show amorphous phase. Orthorhombic Sc2(MoO4)3 thin films were prepared after annealing in 500–780 °C for 1 h, the crystalline quality of the post-annealed Sc2(MoO4)3 thin films gradually improved, and the grain size also increased as annealing temperature rises. Both as-deposited and post-annealed Sc2(MoO4)3 thin films show a smooth and compact surface. Low heating and cooling rates have contributed to the improvement of quality of the Sc2(MoO4)3 thin films. Orthorhombic Sc2(MoO4)3 thin films show anisotropic NTE. Its coefficient of thermal expansion is − 1.86 × 10−6 °C−1 in 25–700 °C. The transmittance of orthorhombic Sc2(MoO4)3 thin film post-annealed at 780 °C is measured as well and which is about 82% in the visible light range. [ABSTRACT FROM AUTHOR]

Orthorhombic In 0.5 Sc 1.5 Mo 3 O 12 thin films have been synthesized using the sol-gel spin coating. Influences of post-annealing temperatures on crystal structure, morphology, negative thermal expansion (NTE) and optical performances of the thin films were studied using XRD, SEM, XPS, high-temperature XRD and UV–Vis–NIR spectrophotometer. XRD and SEM results show that as-prepared thin film is in an amorphous state with a smooth and dense surface. Orthorhombic In 0.5 Sc 1.5 Mo 3 O 12 thin films were obtained after post-annealing in 550–750 °C. The higher the annealing temperature in 550–750 °C, the better the crystallinity of orthorhombic In 0.5 Sc 1.5 Mo 3 O 12 thin films. In addition, the grain size of the In 0.5 Sc 1.5 Mo 3 O 12 thin film also grows as the annealing temperature increases. The resulting orthorhombic In 0.5 Sc 1.5 Mo 3 O 12 thin films exhibit anisotropic NTE. Its volumetric coefficient of thermal expansion (CTE) is −3.44 × 10−6 °C−1, while the CTEs in a -, b - and c -axis directions are −4.70 × 10−6 °C−1, 5.37 × 10−6 °C−1, and -4.10 × 10−6 °C−1 in 25–700 °C, respectively. In addition, the transmittance of orthorhombic In 0.5 Sc 1.5 Mo 3 O 12 thin films post-annealed at 750 °C is around 87.75 %–95.03 %. [ABSTRACT FROM AUTHOR]

The aromatic compound phenylacetic acid (PAA) is present in the environment, and released in the catabolism of phenylalanine, 2-phenylethylamine, or environmental contaminants such as ethylbenzene and styrene. PAA was also proposed to be involved in human chronic kidney disease development. Several bacteria and fungi utilize these aromatic acids as sole carbon source either during aerobic or anaerobic conditions. The aromatic structure of PAA makes this compound resistant toward oxidation or reduction, because the stabilizing resonance energy of the aromatic ring system is difficult to overcome. In the case of bacteria that utilize aromatic compounds as growth substrates, the aromatic ring system limits survival due to a lack of carbon source. Sphingopyxis sp. YF1 isolated from Lake Taihu was found to be beneficial in bioremediation of aromatic compounds. This study thus aimed to examine the influence of environmental factors such as temperature, PAA concentration, and pH on the effectiveness of Sphingopyxis sp. YF1 to degrade aromatic compounds using PAA as model compound. Data showed the highest PAA-degrading rate of strain Sphingopyxis sp. YF1 was 7.6 mg/L·h under the condition of 20°C, pH 9 with a 1000 μg/ml concentration of PAA. Evidence indicates that PAA-degrading ability of strain Sphingopyxis sp. YF1 appears to be primarily influenced by the concentration of PAA, followed by temperature and pH. PAA-degrading gene PAAase was identified in this strain using polymerase chain reaction (PCR) method. These results illustrate that the bacteria Sphingopyxis sp. YF1 removes PAA effectively at certain environmental conditions and this proves beneficial in bioremediation of aromatic compounds. [ABSTRACT FROM AUTHOR]

Microcystin-LR (MC-LR), a known hepatotoxin present in drinking water, and contaminated food and algal dietary supplements poses a threat to environmental and public health and thus needs to be removed. Previously microbial aerobic degradation was considered the predominant catabolic process for MC-LR inactivation, but the potential role of anaerobic microbes still needs to be determined. In our study an anaerobic MC-degrading bacterium Enterobacter sp. YF3 was isolated and identified that was capable of degrading MC-LR. Under optimal conditions the anaerobic Enterobacter sp. YF3 displayed a MC-degrading rate of 0.34 µg/ml/day. This process was dependent on temperature, pH and MC-LR concentration. Further the extracellular secretion of metabolites of anaerobic bacterium degraded MC-LR at 0.22 µg/ml/day. The parent MC-LR as well as two MC-degrading products was identified by high performance liquid chromatography (HPLC). The anaerobic MC-degrading Enterobacter sp. bacterium metabolized MC-LR independent of MC-degrading genes mlrABCD. Data indicate that anaerobic Enterobacter sp. YF3 produces MC-degrading products via a pathway that acts independently of mlrABCD genes which may add to the arsenal of bacteria to degrade microcystins. [ABSTRACT FROM AUTHOR]

Orthorhombic In 0.5 Sc 1.5 Mo 3 O 12 nanofibers were prepared by electrospinning followed by a heat treatment. The effects of post-annealing temperatures on the phase composition, microstructure and morphology were investigated by XRD, SEM, HRTEM and XPS. Negative thermal expansion (NTE) behaviors of the In 0.5 Sc 1.5 Mo 3 O 12 nanofibers were analyzed by high-temperature XRD. Results indicate that the as-prepared In 0.5 Sc 1.5 Mo 3 O 12 nanofibers show an amorphous structure with smooth and homogeneous shape. The average diameter of the as-prepared In 0.5 Sc 1.5 Mo 3 O 12 nanofibers is around 515 nm. Well crystallized orthorhombic In 0.5 Sc 1.5 Mo 3 O 12 nanofibers could be prepared after post-annealing at 550 °C for 2 h with an average diameter of about 192 nm. The crystallinity of In 0.5 Sc 1.5 Mo 3 O 12 nanofibers gradually improved with the increase of annealing temperature. However, too high post-annealing temperature leads to a damage of sample's fiber structure. The high-temperature XRD results reveal that In 0.5 Sc 1.5 Mo 3 O 12 nanofibers show an anisotropic NTE, and the coefficients of thermal expansion (CTEs) along a -axis and c -axis were −5.95 × 10−6 °C−1 and -3.54 × 10−6 °C−1, while the one along b -axis is 5.61 × 10−6 °C−1. The volumetric CTE of In 0.5 Sc 1.5 Mo 3 O 12 nanofibers is −3.90 × 10−6 °C−1 and the linear one is 1.3 × 10−6 °C−1 in 25–700 °C. [ABSTRACT FROM AUTHOR]

Since the aggregate structure influence the mechanical response of mixture and its monitoring signal, this study mainly advance the integration of gradation theory and sensor testing methods from the micro-scale analysis. Based on sphere parking theory, the upper and lower limit of weighted average size in gradations were determined from the point of densest/loosest state respectively. Three skeletons according to the weighted average size criterion were designed for comparatively analysis of their stability. Moreover, a smart rock(SR)sensor was embedded for monitoring and a skeleton-sensor coupling model was further established to reveal the mechanism of skeleton's evolution. Results show that although the weighted average size criterion is based on pure sphere assumption, it still works when comes to aggregates with real angular shapes. Key attributes of different skeletons can be captured and identified by the embedded sensor from the point of particle's sliding and rearrangement. Thus,apart from currant indices such as stress/strain etc,the movements data including acceleration and angular acceleration also shows a huge potential possibility in pavement monitoring in the future. • Muti-scale conversion in modelling based on HCP lattice was proposed. • Pure sphere parking theory is verified in angular aggregate skeletons. • Damage characteristic is revealed by skeleton-sensor coupling analysis. • Application of SR sensor is validated in capturing skeletons' micro-states. [ABSTRACT FROM AUTHOR]

Microcystin-leucine-arginine (MC-LR), a cyclic potentially carcinogenic hepatotoxin, occurs frequently in aquatic habitats worldwide and seriously threatens ecosystem and public health. Limited effectiveness of physicochemical treatments to remove MC-LR from drinking water has led to a search for alternative cost-effective and environment friendly biodegradation strategies. Obtaining MC-degrading bacteria and understanding their MC-degrading mechanisms are outstanding challenges. Here, a novel indigenous bacterium named Sphingopyxis sp. YF1 with a high efficient capacity for MC-degradation was successfully isolated from eutrophic Lake Taihu. Through integrating mass spectrometer and multi-omics analyses accompanied by functional verification of certain genes and proteins, a complete MC-degradation pathway was firstly identified, in which MC-LR was sequentially degraded into linearized MC-LR, tetrapeptide, Adda, phenylacetic acid, and finally potential product CO 2. Some specific proteins such as microcystinase, linearized-microcystinase, tetrapeptidease and PAAase responsible for this pathway were identified. This study pioneeringly demonstrated that MC-LR can be completely degraded through natural remediation processes and revealed a significant potential for MC-LR biodegradation in both natural environment and engineered systems. Image 1 • New MC-degrading genes and products were explored through a multi-omic approach. • A complete MC degradation pathway was identified. • A novel bacterium with high MC-degrading rate was isolated from Lake Taihu. • Proteomics data of MC-degrading bacteria were obtained for the first time. • A series of key enzymes responsible for detoxifying MC-LR were identified. [ABSTRACT FROM AUTHOR]

The increasing cyanobacterial blooms have recently been considered a severe environmental problem. Microcystin-leucine arginine (MC-LR) is one of the secondary products of cyanobacteria metabolism and most harmful cyanotoxins found in water bodies. Studies show MC-LR negatively affects various human organs when exposed to it. The phenotype of the jejunal chronic toxicity induced by MC-LR has not been well described. The aim of this paper was to investigate the effects of MC-LR on the jejunal microstructure and expression level of inflammatory-related factors in jejunum. Mice were treated with different doses (1, 30, 60, 90 and 120 μg/L) of MC-LR for six months. The microstructure and mRNA expression levels of inflammation-related factors in jejunum were analyzed. Results showed that the microstructure of the jejunum was destroyed and expression levels of inflammation-related factors interleukin (IL)-1β, interleukin (IL)-8, tumor necrosis factor alpha, transforming growth factor-β1 and interleukin (IL)-10 were altered at different MC-LR concentrations. To the best of our knowledge, this is the first study that mice were exposed to a high dose of MC-LR for six months. Our data demonstrated MC-LR had the potential to cause intestinal toxicity by destroying the microstructure of the jejunum and inducing an inflammatory response in mice, which provided new insight into understanding the prevention and diagnosis of the intestinal diseases caused by MC-LR. [ABSTRACT FROM AUTHOR]

The presence of cyanobacteria in drinking water, aquatic foods and bathing water has created a significant major problem to global public health as these toxins induce damage in various organ including liver, cardiovascular, intestinal and central nervous systems. Although the morphologic, phylogenetic and toxicogenetic characteristics of cyanobacteria were identified in several lakes in China, many freshwater sources such as Dong Ting Lake, Hunan Province, China remain to be determined. Since the presence of these cyanobacteria may potentially affect human health, the aim of this study was to isolate, identify and characterize the most frequent occurring bloom-forming cyanobacteria in Dong Ting Lake, Hunan Province, China, which can provide information on the safety of utilization of this water source for drinking water, agriculture and recreation. Samples collected from the surface water of Dong Ting Lake were subjected to serial dilution in the lab for morphological analysis. Data demonstrated the morphological features were 2–5 µm diameters with rounded shapes and green color resembling Microcystis sp. The isolated cyanobacterial strain obtained from surface water samples in Dong Ting Lake was termed Microcystis sp. YFM2. The MC concentration was detected by enzyme-linked immunosorbent assay (ELISA) and found to be 92.88 µg/107 cells in Microcystis sp. YFM2. By polymerase chain reaction (PCR) results indicated that Microcystis sp. YFM2 isolated from Dong Ting Lake contained synthetase genes (mcyA-C). Our findings indicated that the dominant cyanobacteria Microcystis sp. YFM2 isolated from the freshwater Dong Ting Lake demonstrated morphologic, phylogenetic and toxicogenetic properties resembling a toxin generating cyanobacterium. Based upon this knowledge, it is essential to monitor the use of this Lake for future domestic, agricultural and recreational purposes. [ABSTRACT FROM AUTHOR]

Ethnopharmacological relevance Kai-Xin-San, an ancient formula composed of Ginseng Radix et Rhizoma, Polygalae Radix, Acori Tatarinowii Rhizoma and Poria, was frequently applied for major depression disorders for thousands of years. However, its molecular mechanism has not clearly been investigated. Aim of the study We aimed to reveal the action mechanism of KXS on anti-depression on inducing neuronal differentiation on PC12 cells. Materials and methods A chemically standardized water extract of KXS was applied onto cultured PC12 cells in determining its effect on neurotransmitter regulation enzymes and neurite outgrowth. Results Single KXS treatment showed obvious changes in the expression of neurofilament and neurotransmitter regulation enzymes, which in parallel to treatment of nerve growth factor (NGF). Although KXS by itself did not show significant inductive effect on neurite outgrowth of PC12 cells, KXS could potentiate the NGF induced neurite outgrowth. Among the three ratios, K-652 showed the most powerful effect and cAMP-dependent pathway might play the major role. Conclusions KXS might exert the anti-depressant-like action of be inducing neuronal differentiation, which supported the clinically usage of this decoction. [ABSTRACT FROM AUTHOR]

A label-free electrochemical biosensor was fabricated based on MWCNT-COOH modified electrodes and degrading enzyme MlrB as recognition element for detecting L-MC-LR. [Display omitted] • Application of degradation enzyme MlrB as innovative recognition element. • Improvement of electrode conductivity with MWCNT-COOH functionalization. • A wide linear range (1 pg/mL ∼ 100 ng/mL) and an outstanding LOD (0.127 pg/mL). • Good sensitivity and reliability of biosensor when applied to actual water samples. A label-free electrochemical biosensor was firstly constructed to detect linear microcystin-LR (L-MC-LR) with high sensitivity. Degradation enzyme MlrB was used as recognition element for specific recognition of L-MC-LR. The electrode was modified with –COOH functionalized multi-walled carbon nanotube to increase the specific surface area and improve the conductivity, which was then applied to immobilize MlrB. The electrochemical signal was changed with the reaction between MlrB and L-MC-LR, which was recorded by using square wave voltammetry. The electrochemical biosensor showed superior sensitivity, with a dynamic range of 1 pg/mL to 100 ng/mL and a detection limit of 0.127 pg/mL. Moreover, the fabricated electrochemical biosensor exhibited excellent specificity toward L-MC-LR in real water samples. The concentrations of spiked L-MC-LR were 0.100, 5.00, 50.0 ng/mL, and the recovery rates were 95.0–104% with relative standard deviation (RSD) of 0.900–2.30% and 74.0–93.0% with RSD of 2.30–3.50% in lake water and tap water, respectively. Furthermore, the selectivity, reproducibility, and stability demonstrated the potential of degradation enzymes as recognition element in detection of cyanotoxins. [ABSTRACT FROM AUTHOR]

The increasing production of microcystin-LR (MC-LR) causing animal and human health issues is found in eutrophic water bodies, marine habitats and desert environments. The health threat posed by MC-LR has led to the establishment of World Health Organization's water guideline value of 1 μg/mL. Combating this has increased the search for cost-effective approach to degrade MC-LR. The study aimed to optimize the MC-degrading environmental factors of bacterial community YFMCD4. Response surface methodology (RSM) was employed to evaluate the influence of varying temperatures, pH and initial MC-LR concentration on the biodegradation efficiency of MC-LR by bacterial community YFMCD4. The optimal MC-LR biodegradation environmental factors were found to be 30 °C, pH 7 and 2 μg/mL initial MC-LR. The biodegradation rate reached 100% after 10 h. YFMCD4 mainly consisted of genera Alacligenes , Sphingobacterium and Pseudomonas using High-throughput pyrosequencing technology. The mlrA gene encoding MlrA enzyme considered most important for MC-LR biodegradation was obtained from YFMCD4. Data demonstrated that the bacterial structure and biodegradation efficiency of YFMCD4 varied with the change of environmental factors including temperature, pH and MC-LR concentrations. RSM is considered a good method to examine the optimal biodegradation environmental conditions for MC-LR. To date, RSM and High-throughput pyrosequencing technology are employed to optimize the biodegradation conditions (30 °C, pH 7 and 2 μg/mL initial MC-LR) and analyze the structure of bacterial community for the first time. • RSM was used to optimize MC-LR biodegradation conditions by YFMCD4 for the first time. • Varying temperatures, pH and MC-LR concentrations influenced MC-LR biodegradation. • Structure of YFMCD4 was analyzed by high-throughput pyrosequencing technology. • mlrA and mlrD homologues genes were amplified from YFMCD4. [ABSTRACT FROM AUTHOR]

Members of genus Sphingopyxis are frequently found in diverse eco-environments worldwide and have been traditionally considered to play vital roles in the degradation of aromatic compounds. Over recent decades, many aromatic-degrading Sphingopyxis strains have been isolated and recorded, but little is known about their genetic nature related to aromatic compounds biodegradation. In this study, bacterial genomes of 19 Sphingopyxis strains were used for comparative analyses. Phylogeny showed an ambiguous relatedness between bacterial strains and their habitat specificity, while clustering based on Cluster of Orthologous Groups suggested the potential link of functional profile with substrate-specific traits. Pan-genome analysis revealed that 19 individuals were predicted to share 1,066 orthologous genes, indicating a high genetic homogeneity among Sphingopyxis strains. Notably, KEGG Automatic Annotation Server results suggested that most genes pertaining aromatic compounds biodegradation were predicted to be involved in benzoate, phenylalanine, and aminobenzoate metabolism. Among them, β-ketoadipate biodegradation might be the main pathway in Sphingopyxis strains. Further inspection showed that a number of mobile genetic elements varied in Sphingopyxis genomes, and plasmid-mediated gene transfer coupled with prophage- and transposon-mediated rearrangements might play prominent roles in the evolution of bacterial genomes. Collectively, our findings presented that Sphingopyxis isolates might be the promising candidates for biodegradation of aromatic compounds in pollution sites. [ABSTRACT FROM AUTHOR]

Harmful Microcystis aeruginosa blooms occurred frequently in many eutrophic lakes and rivers with resultant serious global environmental consequences. Algicidal bacteria may play an important role in inhibiting the growth of Microcystis aeruginosa and are considered as an effective method for preventing the appearance of blooms. In order to counteract the harmful effects of Microcystis aeruginosa, a critical step is to identify, isolate and characterize indigenous algicidal bacteria. This study aimed to isolate a novel indigenous algicidal bacterium identified as Chryseobacterium species based upon its 16S rDNA sequence analysis, and determine whether this bacterium was effective in lysing Microcystis aeruginosa FACHB 905. The influence of environmental factors including temperature, pH, quantity of Chryseobacterium species as well as Microcystis aeruginosa concentration were examined with respect to algae-lysing properties of this bacterial strain. Data demonstrated that the highest algae-lysing activity of 80% against Microcystis aeruginosa FACHB 905 occurred within 72 hr. In addition, the algae-lysing activities of Chryseobacterium species cells were significantly higher than those of cell-free supernatant. In conclusion, data showed the algicidal bacterium Chryseobacterium species exhibited potent Microcystis aeruginosa-lysing activities and attacked Microcystis aeruginosa directly suggesting this algicidal bacterium may be potentially useful for reducing the number of harmful Microcystis aeruginosa blooms. [ABSTRACT FROM AUTHOR]

Microcystin-LR (MC-LR) is the most toxic and frequently detected monocyclic heptapeptide hepatotoxin produced by cyanobacteria, which poses a great threat to the natural ecosystem and public health. It is very important to seek environment-friendly and cost-efficient methods to remove MC-LR in water. In this study, the MC-degrading capacities of a novel indigenous bacterial community designated as YFMCD4 and the influence of environmental factors including various temperatures, MC concentrations and pH on the MC-degrading activities were investigated utilizing high-performance liquid chromatography (HPLC). In addition, the MC-degrading mechanism of YFMCD4 was also studied using HPLC coupled with a mass spectrometry equipped with electrospray ionization interface (HPLC-ESI-MS). The data showed MC-LR was completely removed at the maximum rate of 0.5 µg/(mL·h) under the optimal condition by YFMCD4. Two pure bacterial strains Alcaligenes faecalis and Stenotrophomonas acidaminiohila were isolated from YFMCD4 degraded MC-LR at a slower rate. The MC-degrading rates of YFMCD4 were significantly affected by different temperatures, pH and MC-LR concentrations. Two intermediates of a tetrapeptide and Adda appeared in the degradation process. These results illustrate that the novel YFMCD4 is one of the highest effective MC-degrading bacterial community, which can completely remove MC-LR and possesses a significant potential to treat water bodies contaminated by MC-LR. [ABSTRACT FROM AUTHOR]

Herein, we studied the effect of Cu doping on the ultraviolet (UV) emission enhancement of ZnO nanorods. ZnO nanorods with different Cu doping concentrations were prepared by hydrothermal method and the Cu doping behavior was investigated by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), ultraviolet visible (UV–Vis) absorption spectroscopy and photoluminescence (PL). XRD patterns confirmed the incorporation of Cu. Compared with pure ZnO, no other phase appears, the intensity of diffraction peaks and the calculated parameters such as lattice constants increase, all of which proved that the doping of Cu is substitutional doping. Doping induces a red-shift in the absorption maximum wavelength of the absorption spectrum, indicating that doping causes attenuation of UV absorption properties. In the PL spectra, the increase of Cu doping concentration makes the UV emission peak enhanced and there is almost no emission peak in the visible region. The UV emission at room temperature can be attributed to the superposition of free and bound excitons, where free excitons dominate and bound excitons are related to the substitution of Cu for Zn. The enhanced UV emission of Cu-doped ZnO materials could lead to the wide application in the field of UV optoelectronic devices. • Cu doping has a certain effect on light absorption properties of ZnO nanorods. • The crystal structure of ZnO nanorods is not significantly affected by Cu doping. • A certain concentration of Cu can enhance the UV emission of ZnO nanorods. • The UV emission at room temperature can be attributed to the superposition of free and bound excitons. [ABSTRACT FROM AUTHOR]

The effect of crop straw return on C 2 –C 5 non-methane hydrocarbon (NMHC) emissions from agricultural soils is investigated using a laboratory-controlled incubation of agricultural soils amended with crop straw for a period of 56 days. The average emission fluxes of total C 2 –C 5 NMHCs from amended agricultural soils are 304 and 173 ng kg −1 h −1 under non-flooded and flooded conditions, respectively. Alkenes are the principal emitted C 2 –C 5 NMHCs from amended agricultural soils, where a predominance of ethene, propene and 1-butene together shared 65% and 59% of the total C 2 –C 5 NMHCs under non-flooded and flooded conditions, respectively. The emissions rates of the above top three alkenes and the total C 2 –C 5 alkenes from amended agricultural soils under non-flooded conditions are one to four times those under flooded conditions, and these average values are 14–89 and 5–34 times those in their corresponding control treatments, respectively. These results imply that straw return contributes substantially to the emissions of light alkenes from agricultural soils, particularly under non-flooded conditions. The high correlation between microorganisms and C 2 –C 5 NMHC fluxes from amended agricultural soils suggest that microbes play an important role in C 2 –C 5 NMHC emissions from straw-amended agricultural soils. A rough estimate indicates that crop straw return could contribute insignificantly to global C 2 –C 5 hydrocarbon budgets. [ABSTRACT FROM AUTHOR]