Search

Yongzhi Xu,1,2,* Yuanping Hao,2,* Muhammad Arif,3 Xiaodong Xing,4 Xuyang Deng,1 Danyang Wang,1 Yang Meng,2 Shuai Wang,1 Mohamed Sayed Hasanin,5 Wanchun Wang,2 Qihui Zhou3,6 1School of Stomatology, Qingdao University, Qingdao, People’s Republic of China; 2Department of Stomatology, Qingdao Stomatological Hospital Affiliated to Qingdao University, Qingdao, People’s Republic of China; 3Qingdao Key Laboratory of Materials for Tissue Repair and Rehabilitation, School of Rehabilitation Sciences and Engineering, University of Health and Rehabilitation Sciences, Qingdao, People’s Republic of China; 4School of Chemical Engineering, Nanjing University of Science and Technology, Nanjing, People’s Republic of China; 5Cellulose and Paper Department, National Research Centre, Dokki, Cairo, Egypt; 6Hubei Key Laboratory of Biomass Fibers and Eco-Dyeing & Finishing, Wuhan Textile University, Wuhan, People’s Republic of China*These authors contributed equally to this workCorrespondence: Wanchun Wang; Qihui Zhou, Email kqwwch@126.com; qihuizhou@uor.edu.cnIntroduction: Persistent endodontic infections (PEIs) mediated by bacterial biofilm mainly cause persistent periapical inflammation, resulting in recurrent periapical abscesses and progressive bone destruction. However, conventional root canal disinfectants are highly damaging to the tooth and periodontal tissue and ineffective in treating persistent root canal infections. Antimicrobial materials that are biocompatible with apical tissues and can eliminate PEIs-associated bacteria are urgently needed.Methods: Here, ϵ-poly (L-lysine) derived carbon quantum dots (PL-CQDs) are fabricated using pyrolysis to remove PEIs-associated bacterial biofilms.Results: Due to their ultra-small size, high positive charge, and active reactive oxygen species (ROS) generation capacity, PL-CQDs exhibit highly effective antibacterial activity against Enterococcus faecalis (E. faecalis), which is greatly dependent on PL-CQDs concentrations. 100 μg/mL PL-CQDs could kill E. faecalis in 5 min. Importantly, PL-CQDs effectively achieved a reduction of biofilms in the isolated teeth model, disrupting the dense structure of biofilms. PL-CQDs have acceptable cytocompatibility and hemocompatibility in vitro and good biosafety in vivo.Discussion: Thus, PL-CQDs provide a new strategy for treating E. faecalis-associated PEIs. Keywords: carbon quantum dots, Enterococcus faecalis, bacterial biofilm, persistent endodontic infections

The drawbacks and adverse reactions of conventional breast cancer (BC) medications have prompted researchers to seek novel therapeutic approaches. This study aimed to study the impact of biosynthesized selenium nanoparticles by yeast on breast cancer (MCF-7) cells and to find potential underlying mechanisms. Therefore, marine yeast isolates were screened for their ability to biosynthesis selenium nanoparticles (SeNPs). The most potent isolate was identified as Candida pseudojiufengensis based on 18 S rRNA gene sequencing. Incubation of cell-free extract with 0.8 mM of SeO 2 for 48 h at 40°C in pH of 7.0 were optimal conditions for the biosynthesis of SeNPs. The biosynthesized SeNPs were characterized by UV-Vis spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), and dynamic light scattering (DLS) measurements including average particle size distribution and average zeta potential. The results showed that the biosynthesized SeNPs displayed a maximum absorbance peak in the UV-Vis spectrum at 560 nm due to surface plasmon resonance. TEM image elevated spherical shape particles with an average size of 12 nm. SRB assay, flow cytometry, and other biochemical methods were employed to assess SeNPs anti-proliferative effects on MCF-7 cells. SeNPs showed superior anticancer efficacy against MCF-7 cells compared to colon (HCT-116) and liver (HepG2) cancer cells, as evidenced by lower IC50 values (19.59 µg/ml) against 36.36 µg/ml and 27.81 ±1.4 µg/ml, respectively. However, SeNPs demonstrated no cytotoxic effects against HSF cells. Moreover, treatment with SeNPs induces G2/M arrest along with triggering apoptosis in MCF-7 cells. Furthermore, MCF-7 cells treated with SeNPs showed increased oxidative stress, as indicated by observable rises in LPO and 8-OHDG, accompanied by considerable exhaustion in antioxidant enzyme activity. These findings demonstrated that Se nanoparticles synthesized from yeast have therapeutic promise in BC treatment., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Authors. Published by Elsevier B.V.)

Chronic wounds (CWs) treatment still represents a demanding medical challenge. Several intrinsic physiological signals (i.e., pH) help to stimulate and support wound healing. CWs, in fact, are characterized by a predominantly alkaline pH of the exudate, which acidifies as the wound heals. Therefore, pH-responsive wound dressings hold great potential owing to their capability of tuning their functions according to the wound conditions. Herein, porous chitosan (CS)-based scaffolds loaded with cellulose nanocrystals (CNCs) and graphene oxide (GO) were successfully fabricated using a freeze-drying method. CNCs were extracted from bagasse pulps fibers through acid hydrolysis. GO was synthesised by Hummer's method. The scaffolds were then ionically cross-linked using the amino acid L-Arginine (Arg), as a bioactive agent, and tested as potential pH-responsive wound dressing. Notably, the effect of CNCs and GO singly and simultaneously loaded within the CS-Arg scaffolds was investigated. The modulation of CNCs and GO content within CS-Arg scaffolds facilitated the development of scaffolds with an optimal pH-dependent swelling ratio capability and extended degradation time. Furthermore, CS/CNC/GO-Arg scaffolds exhibited tuned biological features, in terms of antimicrobial activity, cellular proliferation/migration ability, and the expression of extracellular matrix specific markers (i.e., elastin and collagen I) related to wound healing in human dermal fibroblasts., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper. Stefania Scialla reports financial support was provided by National Research Council. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

Clothing and textile industries are major contributors to environmental pollution including textile manufacturing through garment production, spinning, weaving, and dyeing. In this context, the sustainability textile industry is a big challenge and contributes to serving a large segment of society. Also, textile wastes could be used as a raw material for added-value products. Herein, in this study, recycling of residues fabric was treated with antimicrobial nanocomposite to reach the best use of exhausts and obtain multifunction products of aesthetic via the technical design of the waste raw materials. Besides, solving the unemployment problem by opening fields for small industry projects capable of producing high-value textile artifacts, especially when treated against microbes, can be applied to home furnishings. The waste fabric was treated via green synthesis nanocomposite based on chitosan and in situ prepared ZnONPs and cross-linked with tannic acid. The prepared nanocomposite was characterized using physicochemical analysis including attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) and X-ray diffraction (XRD). Additionally, the nanocomposite and treated fabric topographical behavior were studied using scanning electron microscopy (SEM) attachment with energy dispersive X-ray analysis (EDX), and images were processed to evaluate the roughness structure. Additionally, high-resolution transmission electron microscopy (HR-TEM) and dynamic light scattering (DLS) were performed to ensure the size and stability of the nanocomposite. The obtained results affirmed the green synthesis of nanocomposite with a size around 130 nm, as well as the doped ZnONPs average size of 26 nm and treated waste fabric, performed a promising attraction between nanocomposite and fabric fibers. Moreover, the antimicrobial study observed excellent activity of nanocomposite against bacteria and unicellular fungi as well., (© 2024. The Author(s).)

Background: Cellulase is considered a group member of the hydrolytic enzymes, responsible for catalyzing the hydrolysis of cellulose and has various industrial applications. Agricultural wastes are used as an inexpensive source for several utilizable products throughout the world. So, searching for cellulase enzymes from fungal strains capable of utilizing agricultural wastes to increase productivity, reduce costs and overcome waste accumulation in the environment is very important to evaluate its potency as a bio-additive to detergent agents., Results: In the current study, the previously identified fungal strain Aspergillus terreus MN901491 was screened and selected for cellulase production. Medium parameters were optimized using one-factor-at-a-time (OFAT) and multi-factorial (Plackett-Burman and Box-Behnken) design methods. OFAT showed the ability of the fungal strain to utilize agricultural wastes (corn cob and rice straw) as a substrate. Also, yeast extract was the best nitrogen source for enhancing cellulase productivity. The most significant variables were determined by Plackett-Burman Design (PBD) and their concentrations were optimized by Response Surface Methodology (RSM) using Box-Behnken Design (BBD). Among eleven independent variables screened by PBD, malt extract, (NH 4 ) 2 SO 4 , and KCl were the most significant ones followed by rice straw which affected cellulase production positively. The ANOVA results particularly the R 2 -value of PBD (0.9879) and BBD (0.9883) confirmed the model efficiency and provided a good interpretation of the experiments. PBD and BBD improved cellulase productivity by 6.1-fold greater than that obtained from OFAT. Medium optimization using OFAT and statistical models increased cellulase production from A. terreus MN901491 by 9.3-fold compared to the non-optimized medium. Moreover, the efficiency of cellulase activity on cotton fabrics as a bio-additive detergent was evaluated and estimated using whiteness and scanning electron microscope (SEM) that affirmed its potential effect and remarkable detergent ability to improve whiteness by 200% in comparison with non-washed fabric and by 190% in comparison with fabric washed by water., Conclusion: The presented work was stabilized as a multi-efficiency in which wastes were used to produce cellulase enzyme from the fungal strain, Aspergillus terreus MN901491 as a bio-additive to detergent applications that involved ecofriendly and green processes., (© 2024. The Author(s).)

The current study aimed to evaluate the effects of biogenic silver nanoparticles (AgNPs) on growth behavior and leaf anatomy of in vitro growing shoots of 'Picual' and 'Dolce' olive cultivars. Biosynthesis of AgNPs was carried out using the cell-free filtrate of Fusarium oxysporum. The dimension and shape of the synthesized AgNPs have been analyzed using spectroscopy and topography analysis tools, confirming that the biosynthesis of AgNPs is a crystalline nanostructure with an average particle size of 37 nm. The shoots of the selected olive cultivars were cultured on Rugini olive medium-supplemented AgNPs at 0, 10, 20, and 30mg L - 1 . The effect of genotypes on shoot multiplication was significant, 'Picual' recorded higher values of shoot growth parameters compared with 'Dolce' cultivar. Adding AgNPs to the culture medium significantly affected the growth of in vitro olive shoots. AgNPs at 20 and 30mg L - 1 produced higher values of the number of shoots, shoot length, and leaf number of Picual cv. compared with the control treatments, but the higher AgNPs concentration harmed the growth parameters of Dolce cv. and recorded lower growth values compared with the lower concentration (10mg L - 1 ). AgNPs had a significant effect on leaf morphology and their anatomical structure. The current results showed that the stimulatory effect of AgNPs on shoot growth of in vitro olive shoots is highly dependent on plant genotype and nanoparticle concentration., (© 2024. The Author(s).)

In modern times, wastewater treatment is vital due to increased water contamination arising from pollutants such as nutrients, pathogens, heavy metals, and pharmaceutical residues. Polysaccharides (PSAs) are natural, renewable, and non-toxic biopolymers used in wastewater treatment in the field of gas separation, liquid filtration, adsorption processes, pervaporation, and proton exchange membranes. Since addition of nanoparticles to PSAs improves their sustainability and strength, nanocomposite PSAs has gained significant attention for wastewater treatment in the past decade. This review presents a comprehensive analysis of PSA-based nanocomposites used for efficient wastewater treatment, focusing on adsorption, photocatalysis, and membrane-based methods. It also discusses potential future applications, challenges, and opportunities in adsorption, filtration, and photocatalysis. Recently, PSAs have shown promise as adsorbents in biological-based systems, effectively removing heavy metals that could hinder microbial activity. Cellulose-mediated adsorbents have successfully removed various pollutants from wastewater, including heavy metals, dyes, oil, organic solvents, pesticides, and pharmaceutical residues. Thus, PSA nanocomposites would support biological processes in wastewater treatment plants. A major concern is the discharge of antibiotic wastes from pharmaceutical industries, posing significant environmental and health risks. PSA-mediated bio-adsorbents, like clay polymeric nanocomposite hydrogel beads, efficiently remove antibiotics from wastewater, ensuring water quality and ecosystem balance. The successful use of PSA-mediated bio-adsorbents in wastewater treatment depends on ongoing research to optimize their application and evaluate their potential environmental impacts. Implementing these eco-friendly adsorbents on a large scale holds great promise in significantly reducing water pollution, safeguarding ecosystems, and protecting human health., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Citrus fruits are one of the most abundant crops globally in more than 140 countries throughout the world. Acid lime ( Citrus aurantifolia swingle) is one of the citrus fruits which popularly has rich nutritional and therapeutic features. The storage period is the important factor that affects the economic and quality properties of this fruit. This study aims to demonstrate the enhancing effect of preharvest spraying with potassium, in addition to the postharvest dipping of fruits in some edible coatings, on the quality and storability of acid lime fruits. Preharvest spraying with organic and mineral forms of potassium, namely, potassium thiosulfate 1.75 g/L (S) and potassium tartrate 2 g/L (T), were carried out at three different times, in May, June, and July. On the other hand, postharvest treatments were carried out via dipping fruits in different types of biopolymers (carboxymethyl cellulose (E2) and gum arabic (E3)) and carboxymethyl cellulose/gum arabic composite (E4) as well as nanocoating formulation based on both biopolymers and doped zinc oxide nanoparticles (ZnONPs) (E1), which were prepared via acid lime peel waste extract. Herein, the physiochemical and morphological characterizations confirmed that the nanocoating was prepared at the nanoscale and doped with green synthesis ZnONPs, with recorded sizes of around 80 and 20 nm, respectively. Preharvest spraying with potassium tartrate enhanced fruit traits (Spraying with potassium tartrate at pre-harvest and nanocoating dipping at post-harvest (TE1), spraying with potassium tartrate at pre-harvest and carboxy methyl cellulose dipping at post-harvest (TE2), spraying with potassium tartrate at pre-harvest and gum arabic dipping at post-harvest (TE3) and spraying with potassium tartrate at pre-harvest and carboxymethyl cellulose/gum arabic composite dipping at post-harvest (TE4)), followed by potassium thiosulfate (spraying with potassium thiosulfate at pre-harvest and nanocoating dipping at post-harvest (SE1), spraying with potassium thiosulfate at pre-harvest and carboxy methyl cellulose dipping at post-harvest (SE2), spraying with potassium thiosulfate at pre-harvest and gum arabic dipping at post-harvest (SE3) and spraying with potassium thiosulfate at pre-harvest and carboxymethyl cellulose/gum arabic dipping at post-harvest (SE4)), compared to control. For postharvest treatments, E1 improved fruit quality, followed by E2, E4, and E3, respectively. The integration between pre- and postharvest treatments showed a clear superiority of TE2, followed by TE4, SE1, and SE2, respectively.

In the last decades, bio-based active food packaging materials have received much attention. It is known that the utilization of traditional materials for food packaging applications lack some critical characteristics such as resistance to the harmful microbes that cause a damage to the preserved foods. Therefore, the current study aimed to find an alternative packaging films comprises an efficient biopolymers. This research work was designed to prepare film mats using hydroxypropyl starch (HPS), polyvinyl alcohol (PVA), palmitic acid (PA) and biosynthesized zinc oxide nanoparticles (ZnONPs). The fabricated films were coded as 1H, 2H, 3H and 4H based on the utilized concentration of ZnONPs. The biosynthesized ZnONPs and the bio-based films loaded with ZnONPs were characterized. The results revealed that ZnONPs exhibited nearly spherical shape and size ∼40 nm. The surface structure of the produced bioactive packaging films exhibited smooth with homogeneous features, excellent mechanical and thermal stability properties. The prepared bioactive packaging film loaded with ZnONPs (4H) exhibited superior antibacterial activity among other films against Escherichia coli ATCC 25922 and Staphylococcus aureus ATCC 25923 with inhibition zones 15.1 ± 0.76 and 12.1 ± 0.71 mm respectively. Correspondingly, packing film 4H exhibited potential antifungal activity toward Aspergillus niger RCMB 02724, A. flavus RCMB 02782, Penicillium expansum IMI 89372 and Fusarium oxysporum RCMB 001004 with inhibition zones (16 ± 1.0, 22 ± 0.90, 18.0 ± 1.1 and12.3 ± 0.57 mm respectively). Moreover, all prepared films did not show cytotoxicity on the normal cell line (Wi38) and recorded biodegradability properties that reached around 85 % after four weeks in soil. Based on these results, the antimicrobial films comprising HPS/PVA and loaded with the biosynthesized ZnONPs can be considered as a suitable film for food packaging purposes., Competing Interests: Declaration of competing interest The authors declare that they have no conflict of interest., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Biocompatibility is a major concern for promising multifunctional bioactive materials. Unfortunately, bioactive materials lack biocompatibility in some respects, so active ingredient formulations are urgently needed. Bimetallic nanoparticles have demonstrated drawbacks in stabilized biocompatible formulations. This study examined the preparation of biomaterial-based multifunctional biopolymers via an eco-friendly formulation method using ultrasound. Bimetallic zinc oxide/iron oxide (magnetic form) nanoparticles (ZnO@Fe 3 O 4 NPs) were formulated using casein and starch as capping agents and stabilizers. The formulated nanocomposite was characterized using ultraviolet-visible spectroscopy (UV-vis), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermal gravimetric analysis (TGA), scanning electron microscopy (SEM), and high-resolution transmission electron microscopy (HR-TEM). Herein, the formulated nanocomposite was shown to have a thermally stable nanostructure, and the bimetallic ZnO@Fe 3 O 4 NPs were measured as 85 nm length and 13 nm width. Additionally, the biocompatibility test showed its excellent cytocompatibility with Wi 38 and Vero normal cell lines, with IC 50 550 and 650 mg/mL, respectively. Moreover, the antimicrobial activity was noted against six pathogens that are represent to the most common pathogenic microbes, with the time required for killing of bacteria and unicellular fungi being 19 h and 61 h for filamentous fungi with remarket an excellent antioxidant activity.

Sustainable bimetallic nanoparticles (NPs) have attracted particular attention in the past decade. However, the efficiency and environmental concerns are associated with their synthesis and properties optimization. We report herein biosynthesis of bimetallic ZnO@SeO NPs based on green and ecofriendly methods using pomegranate peel extract (PPE). Pyrochemical ultraviolet-visible (UV-vis), Fourier-transform infrared (FTIR) and X-ray diffraction (XRD) spectroscopy as well as TEM and EDX supported successful synthesis. Antibacterial, antifungal, and cytotoxic activities were indicative of biological worth of sustainable bimetallic ZnO@SeO NPs, exhibiting antibacterial activity compared to monometallic ZnO and SeO NPs. The values of Minimum Inhibitory Concentration (MIC) of bimetallic ZnO@SeO NPs toward E. coli , P. aeruginosa , B. subtilis and S. aureus were 3.9, 15.62, 3.9 and 7.81 μg ml -1 , respectively. Likewise, a promising antifungal activity against Candida albicans , Aspergillus flavus , A. niger and A. fumigatus was achieved (MICs: 31.25, 1.95, 15.62 and 15.62 μg ml -1 , respectively). The cytotoxicity results suggest that bimetallic ZnO@SeO NPs are non-toxic and biomedically safe, evidenced by in vitro anticancer activity against human liver carcinoma (Hep-G2) cell line (with a half-maximal inhibitory concentration (IC50) > 71 μg ml -1 ). The bimetallic ZnO@SeO NPs successfully biosynthesized using PPE showed a high potential for biomedical engineering., Competing Interests: The authors declare that they have no conflict to interests., (This journal is © The Royal Society of Chemistry.)

Paper coating plays an important role in the paper properties, printability and application. The nanocoating is a multifunction layer that provides the paper with unique features. In this work, nanocoating formulas were prepared using a green method and component. The nanocoating formulas were based on biopolymers nanostarch NSt and nanochitosan NCh (NCS) decorated with Egyptian kaolinite Ka doped with zinc nanoparticles NCS@xka/ZnONPs (x represents different ratios) support for multifunctional uses. The nanocoating formulas were characterized using a physiochemical analysis as well as a topographical study. FTIR, XRD, SEM and TEM techniques were used. Additionally, the antimicrobial activity of the tested samples was assessed against six microorganisms including Gram-negative and Gram-positive bacteria. The prepared nanocoating formulas affirmed excellent antimicrobial activity as a broad-spectrum antimicrobial active agent with excellent activity against all representative microbial communities. The nanocoating with the highest ratio of Ka/ZnONPs (NCS@40 ka/ZnONPs) showed excellent antimicrobial activity with an inhibition percentage of more than 70% versus all microorganisms presented. The paper was coated with the prepared suspensions and characterized concerning optical, mechanical and physical properties. When Ka/ZnONPs were loaded into NCS in a variety of ratios, the characteristics of coated paper were enhanced compared to blank paper. The sample NCS@40 ka/ZnONPs increased tensile strength by 11%, reduced light scattering by 12%, and improved brightness and whiteness by 1%. Paper coated with NCh suspension had 35.32% less roughness and 188.6% less porosity. When coated with the sample NCS@10 ka/ZnONPs, the coated paper's porosity was reduced by 94% and its roughness was reduced by 10.85%. The greatest reduction in water absorptivity was attained by coating with the same sample, with a reduction percentage of 132%., (© 2023. The Author(s).)

Metal nanoparticles are assumed to be a new generation of biologically active materials. The integrations between more than one metal are synergetic multifunctional features. In the current study, trimetallic copper-selenium-zinc oxide nanoparticles (Tri-CSZ NPs) were successfully mycosynthesized using Aspergillus niger through an ecofriendly method for the first time. The biosynthesis of the particles was characterized using physiochemical and topographical analysis. The physiochemical analysis included Fourier transform infrared spectroscopy (FTIR), which affirmed that the biosynthesis of Tri-CSZ NPs relies on the functional groups of fungal filtrates. Additionally, the UV-visible and X-ray diffraction patterns were proposed for the formation of Tri-CSZ NPs; moreover, topography analysis confirmed that the micromorphology of the nanoparticles were similar to a stick, with ends having a tetragonal pyramid shape, and with an average nanosize of about 26.3 ± 5.4 nm. Cytotoxicity results reveled that the Tri-CSZ NPs have no cytotoxicity on the human normal cell line Wi 38 at low concentrations, where the IC50 was 521 µg/mL. Furthermore, the antifungal activity of the Tri-CSZ NPs was evaluated. The antifungal results revealed that the Tri-CSZ NPs have promising antifungal activity against Mucor racemosus , Rhizopus microsporus , Lichtheimia corymbifera , and Syncephalastrum racemosum , where the minimum inhibitory concentrations (MICs) were 1.95, 7.81, 62.5, and 3.9 µg/mL, and the minimum fungicidal concentrations (MFCs) were 250, 62.5, 125, and 1000 µg/mL, respectively. In conclusion, Tri-CSZ NPs were successfully mycosynthesized using A. niger , which have a promising antifungal activity against fungi causing mucormycosis.

Microbial resistance is the first morbidity and mortality cause for patients as usually a secondary infection. Additionally, the MOF is a promising material that shows a nice activity in this field. However, these materials need a good formulation to enhance biocompatibility and sustainability. Cellulose and its derivatives are well as filers for this gap. In this presented work, a novel green active system based on carboxymethyl cellulose and Ti-MOF (MIL-125-NH 2 @CMC) modified with thiophene (Thio@MIL-125-NH 2 @CMC) was prepared by a post-synthetic modification (PSM) route based. FTIR, SEM and PXRD were utilized to characterize nanocomposites. In addition, transmission electron microscopy (TEM) was used to corroborate the nanocomposites' particle size and diffraction pattern as well as the DLS affirmed the size as 50 and 35 nm for MIL-125-NH 2 @CMC and Thio@MIL-125-NH 2 @CMC, respectively. The formulation of the nanocomposites was validated by physicochemical characterization techniques, while morphological analysis confirmed the nanoform of the prepared composites. The antimicrobial, antiviral and antitumor properties of MIL-125-NH 2 @CMC and Thio@MIL-125-NH 2 @CMC were assessed. Antimicrobial testing revealed that Thio@MIL-125-NH 2 @CMC possesses greater antimicrobial activity than MIL-125-NH 2 @CMC. Additionally, Thio@MIL-125-NH 2 @CMC demonstrated promising antifungal activity against C. albicans and A. niger where MICs were 31.25 and 0.97 µg/mL, respectively. Also, Thio@MIL-125-NH 2 @CMC exhibited antibacterial activity against E. coli and S. aureus where MICs were 1000 and 250 µg/mL, respectively. In addition, the results demonstrated that Thio@MIL-125-NH 2 @CMC displayed promising antiviral activity against both HSV1 and COX B4, with antiviral activities of 68.89% and 39.60%, respectively. Furthermore, Thio@MIL-125-NH 2 @CMC exhibited potential anticancer activity against MCF7 and PC3 cancerous cell lines, where IC 50 was 93.16 and 88.45%, respectively. In conclusion, carboxymethyl cellulose/sulfur-functionalized Ti-based MOF composite was successfully synthesized which had antimicrobial, antiviral and anticancer activities., (© 2023. The Author(s).)

Fluorescence is well-known nowadays as one of the most efficient anti-counterfeiting techniques. Zinc oxide quantum dots (ZnOQds) are exceptionally fluorescence when exposed to ultraviolet (UV) light, which makes them a candidate for anti-counterfeiting printing. The resulting anti-counterfeiting papers are sustainable and resistance against organic dyes. In this work, ZnOQds were prepared via a green method and characterized under UV-visible spectroscopy, along with microscopic observations by transmission electron microscopy (TEM) and crystallography by X-ray diffraction (XRD). Formation of ZnOQds nanocrystals with an average partials size of 7.3 nm was approved. Additionally, double-layers sheets were prepared at two loading concentrations of ZnOQds, namely 0.5 and 1 (wt./v) and underwent characterization using a topographical surface study via field emission scanning electron microscopy (FE-SEM). Hybrid sheets were mechanically more stable compared to single-layer paper and likewise polymer film. Moreover, aging simulation approved a high stability for hybrid sheets. Particularly, the photoluminescence emission affirmed anti-aging character of hybrid paper for more than 25 years. The hybrid sheets also showed a broad range of antimicrobial activity., Competing Interests: The authors declare no conflict of interest., (©2023PublishedbyElsevierLtd.)

Bacterial Cellulose (BC) is still the most renewable available biopolymer produced in fine nature from alternative microbial sources as bacteria. In the present study, newly BC producing bacteria were successfully isolated from acidic fruits. The most potent producer was isolated from strawberry and identified genetically using 16 s rRNA technique as Achromobacter S3. Different fruit peels were screened to produce BC using the cheapest culture medium. Among them, Mango peel waste (MPW) hydrolysate proved to be the significant inducible alternative medium without any extra nutrients for the maximum productivity. Improvement of the BC yield was successfully achieved via statistical optimization of the MPW culture medium, from 0.52 g/L to 1.22 g/L with 2.5-fold increased about the standard HS culture medium. Additionally, the physicochemical analysis affirmed the cellulose molecular structure as well as observed the crystallinity of nanofiber as 72 and 79% for BC produced by Achromobacter S33 on HS and MPW media, respectively. Moreover, the topographical study illustrated that the BC nanofibers had close characteristics upon fiber dimeter and length as about 10 and 200 nm, respectively., (© 2023. The Author(s).)

The human nature of curiosity, wonder, and ingenuity date back to the age of humankind. In parallel with our history of civilization, interest in scientific approaches to unravel mechanisms underlying natural phenomena has been developing. Recent years have witnessed unprecedented growth in research in the area of pharmaceuticals and medicine. The optimism that nanotechnology (NT) applied to medicine and drugs is taking serious steps to bring about significant advances in diagnosing, treating, and preventing disease-a shift from fantasy to reality. The growing interest in the future medical applications of NT leads to the emergence of a new field for nanomaterials (NMs) and biomedicine. In recent years, NMs have emerged as essential game players in modern medicine, with clinical applications ranging from contrast agents in imaging to carriers for drug and gene delivery into tumors. Indeed, there are instances where nanoparticles (NPs) enable analyses and therapies that cannot be performed otherwise. However, NPs also bring unique environmental and societal challenges, particularly concerning toxicity. Thus, clinical applications of NPs should be revisited, and a deep understanding of the effects of NPs from the pathophysiologic basis of a disease may bring more sophisticated diagnostic opportunities and yield more effective therapies and preventive features. Correspondingly, this review highlights the significant contributions of NPs to modern medicine and drug delivery systems. This study also attempted to glimpse the future impact of NT in medicine and pharmaceuticals.

Graphene oxide (GO) and its reduced form (rGO) have recently attracted a fascinating interest due to their physico-chemical properties, which have opened up new and interesting opportunities in a wide range of biomedical applications, such as wound healing. It is worth noting that GO and rGO may offer a convenient access to its ready dispersion within various polymeric matrices (such as cellulose and its derivative forms), owing to their large surface area, based on a carbon skeleton with many functional groups (i.e., hydroxyl, carboxyl, epoxy bridge, and carbonyl moieties). This results in new synergic properties due to the presence of both components (GO or rGO and polymers), acting at different length-scales. Furthermore, they have shown efficient antimicrobial and angiogenic properties, mostly related to the intracellular formation of reactive oxygen species (ROS), which are advantageous in wound care management. For this reason, GO or rGO integration in cellulose-based matrixes have allowed for designing highly advanced multifunctional hybrid nanocomposites with tailored properties. The current review aims to discuss a potential relationship between structural and physico-chemical properties (i.e., size, edge density, surface chemistry, hydrophilicity) of the nanocomposites with antimicrobials and angiogenic mechanisms that synergically influence the wound healing phenomenon, by paying particular attention to recent findings of GO or rGO/cellulose nanocomposites. Accordingly, after providing a general overview of cellulose and its derivatives, the production methods used for GO and rGO synthesis, the mechanisms that guide antimicrobial and angiogenic processes of tissue repair, as well as the most recent and remarkable outcomes on GO/cellulose scaffolds in wound healing applications, will be presented.

Bio-based polymers are a class of polymers made by living organisms, a few of them known and commercialized yet. Due to poor mechanical strength and economic constraints, they have not yet seen the extensive application. Instead, they have been an appropriate candidate for biological applications. Growing consumer knowledge of the environmental effect of polymers generated from petrochemical sources and a worldwide transition away from plastics with a lifespan of hundreds of years has resulted in greater interest in such hitherto unattainable sectors. Bio-based polymers come in various forms, including direct or "drop-in" replacements for their petrochemical counterparts with nearly identical properties or completely novel polymers that were previously unavailable, such as polylactide. Few of these bio-based polymers offer significantly improved technical specifications than their alternatives. Polylactic acid (PLA) has been well known in the last decade as a biodegradable thermoplastic source for use in 3DP by the "fused deposition modeling" method. The PLA market is anticipated to accomplish 5.2 billion US dollars in 2020 for its industrial usage. Conversely, 3DP is one of the emerging technologies with immense economic potential in numerous sectors where PLA is one of the critical options as the polymer source due to its environmentally friendly nature, glossiness, multicolor appearance, and ease of printing. The chemical structure, manufacturing techniques, standard features, and current market situation of PLA were examined in this study. This review looks at the process of 3DP that uses PLA filaments in extrusion-based 3DP technologies in particular. Several recent articles describing 3D-printed PLA items have been highlighted., Competing Interests: Competing interestsThe authors declare no competing interests., (© The Author(s), under exclusive licence to Springer-Verlag London Ltd., part of Springer Nature 2023, Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.)

This study deals with the production of natural fiber plastic composites (NFPCs) to reduce environmental pollution with agricultural and plastic waste. Where the NFPCs were prepared from waste/pure polyethylene (WPE) (pure polyethylene (50%)/recycled polyethylene (50%)) and modified sunflower waste via an eco-friendly and economic biological process. The sunflower fibers (SF) were treated via whole selective fungal isolate, namely, Rhizopus oryzae (acc no. OM912662) using two different incubation conditions; submerged (Sub), and solid-state fermentation (SSF) to enhance the fibers' compatibility with WPE. The treated and untreated fibers were added to WPE with various concentrations (10 and 20 wt%). The morphology and structure of fibers were characterised by a scanning electron microscope (SEM) and attenuated total reflection-Fourier transform infrared (ATR-FTIR). Furthermore, the mechanical properties, morphology, biodegradation and water vapour transmission rate (WVTR) for the prepared NFPCs were investigated. The results showed that compatibility, mechanical properties and biodegradation of NFPCs were improved by the addition of sunflower fibers treated by SSF conditions., (© 2022. The Author(s).)

Nowadays renewable energy with low prices is a global target that has taken the attention to compare alternatives energy sources with fossil fuels. Therefore, this study was established to find suitable and sustainable alternative low-cost fuels source. Cooking oil waste (COW) was mixed with non-pretreated citrus tree fibers (CTF) (0.5 mL to 1 g ratio) and pressed to formulate coal (CTF/COW). Otherwise, this mixture was subjected to in situ fungal pretreated using Aspergillus flavus isolate to simplify the mixture composition and pressed to offer in a usable form with enhancing their heating value for the first time. CTF/COW was characterized using attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR), scanning electron microscope (SEM) and thermal analysis (TGA) before and after treatment. The fungal isolate was observed with enzyme productivity and activity of CMCase, avicelase, xylanase, mannanase, α-glucosidase, β-glucosidase, lignin peroxidase and lipase according to enzyme assays and the chemical compositions of CTF before and after fungal treatment, where the best PH for enzymes extraction was between 5 and 7. The fungal enzymes increased the heating value by about two and half folds in comparison with non-pretreated coal. Moreover, the calorific value of tCTF/COW was 43,422 kJ/kg, which was higher than CTF recorded 18,214 kJ/kg and COW recorded 39,823 kJ/kg. Our result suggests that fungal treatment of the mixture of citrus trees and cooking oil waste presents as a promising low-cost and eco-friendly coal., (© 2022. The Author(s).)

The application of green and sustainable anticorrosive coatings is becoming of upsurge interest for the protection of metallic materials in aggressive environments. Herein, a stable crystalline chitosan/gum Arabic composite (CGAC) nanopowder was successfully synthesized and characterized by various methods. The CGAC nanopowder with different doses (25, 50, 100, and 200 ppm) was used to coat mild steel samples and examined its anticorrosion ability in 3.5 wt.% NaCl solution using gravimetric, electrochemical measurements, and surface characterization techniques. All methods yielded consistent results revealing that nanocomposite coatings can impart good anticorrosive properties to the steel substrate. The obtained protection efficiency was enhanced with increasing CGAC dose in the applied surface layer achieving 96.6% for the 200 ppm-coating. SEM and AFM surface morphologies of uncoated and coated samples after the inundation in the saline solution showed that CGAC coating can block the active corrosive sites on the steel surface, and prevent the aggressive Cl - ions from attacking the metallic substrate. The water droplet contact angle gave further support as it increased from 50.7° for the pristine uncoated surface to 101.2° for the coated one. The current research demonstrates a promising natural and reliable nanocomposite coating for protecting mild steel structures in the marine environment., (© 2022. The Author(s).)

Enterococcus faecalis (E. faecalis) biofilm-associated persistent endodontic infections (PEIs) are one of the most common tooth lesions, causing chronic periapical periodontitis, root resorption, and even tooth loss. Clinical root canal disinfectants have the risk of damaging soft tissues (e.g., mucosa and tongue) and teeth in the oral cavity, unsatisfactory to the therapy of PEIs. Nanomaterials with remarkable antibacterial properties and good biocompatibility have been developed as a promising strategy for removing pathogenic bacteria and related biofilm. Herein, carbon dots (CDs) derived from fucoidan (FD) are prepared through a one-pot hydrothermal method for the treatment of PEIs. The prepared FDCDs (7.15 nm) with sulfate groups and fluorescence property are well dispersed and stable in water. Further, it is found that in vitro FDCDs display excellent inhibiting effects on E. faecalis and its biofilm by inducing the formation of intracellular and extracellular reactive oxygen species and altering bacterial permeability. Importantly, the FDCDs penetrated the root canals and dentinal tubules, removing located E. faecalis biofilm. Moreover, the cellular assays show that the developed FDCDs have satisfactory cytocompatibility and promote macrophage recruitment. Thus, the developed FDCDs hold great potential for the management of PEIs., (© 2022. The Author(s).)

Inorganic nanoparticles (INPs) have been paid great attention in the field of oncology in recent past years since they have enormous potential in drug delivery, gene delivery, photodynamic therapy (PDT), photothermal therapy (PTT), bio-imaging, driven motion, etc. To overcome the innate limitations of the conventional INPs, such as fast elimination by the immune system, low accumulation in tumor sites, and severe toxicity to the organism, great efforts have recently been made to modify naked INPs, facilitating their clinical application. Taking inspiration from nature, considerable researchers have exploited cell membrane-camouflaged INPs (CMCINPs) by coating various cell membranes onto INPs. CMCINPs naturally inherit the surface adhesive molecules, receptors, and functional proteins from the original cell membrane, making them versatile as the natural cells. In order to give a timely and representative review on this rapidly developing research subject, we highlighted recent advances in CMCINPs with superior unique merits of various INPs and natural cell membranes for cancer therapy applications. The opportunity and obstacles of CMCINPs for clinical translation were also discussed. The review is expected to assist researchers in better eliciting the effect of CMCINPs for the management of tumors and may catalyze breakthroughs in this area., (© 2022. The Author(s).)

Aim: This study aims to prepare a nanocomposite (HPMC/5-FL@GO) from hydroxypropyl methylcellulose (HPMC) and graphene oxide (GO) as biocompatible materials. The nanocomposite enhances the drug activity of immobilized 5-fluorouracil (5-FU), decreasing the side effect of long-run treatment protocols with highly efficient drug-drug activity., Method and Results: Different samples were characterized by ATR-FTIR spectroscopy, X-ray diffraction, scanning electron microscopy coupled with energy dispersive X-ray analysis, transmission electron microscopy, thermogravimetric analysis, and dynamic light scattering along with cytotoxicity and anticancer study. A homogenous and compatible nanocomposite structure with a homogenous drug distribution was confirmed. Furthermore, the prepared nanocomposite has a low cytotoxicity effect against normal Vero cell lines compared with 5-FU. The antitumor activities of the same nanocomposite (20.4 and 74.3 μg mL -1 on A549 and HepG-2) were lower than that of 5-FU (54.1 and 103 μg mL -1 on A549 and HepG-2)., Conclusion and Implications: According to the attained results, the HPMC/5-FL@GO can apply in a biomedical application such as cancer therapy with the unique biocompatible to human cells., (© 2021 Wiley-VCH GmbH.)

Lithium-ion batteries and supercapacitors are examples of energy storage technologies that have a lot of promise in a variety of applications. Herein, NiO-porous carbon composites were prepared by a green and cost-effective facile synthesis route from banana peel waste materials. The surface morphology and chemical composition of the NiO-porous carbon composite were investigated using a scanning electron microscope (SEM) and energy dispersive x-ray analysis (EDX). The prepared samples were also described through Fourier transform infrared (FTIR) spectroscopy, x-ray powder diffraction (XRD), thermal gravimetric analysis (TGA), and surface area measurements. The electrochemical behavior of prepared materials was studied by cyclic voltammetry (CV), galvanostatic charge-discharge, and electrochemical impedance (EIS) to test their applicable suitability as supercapacitor electrode. PC-NiO (3) composite exhibits a remarkable specific capacitance of 811 F/g at a current density of 1 A/g. The specific capacitance of PC-NiO (3) is 5.3 times more than that of PC material at 1.0 A/g. Furthermore, the PC-NiO (3) composite material still exhibits a specific capacitance of 780 F/g at 5.0 A/g, high rate capability of 84.55% retention at a high current density of 10.0 A/g and superior cycle stability at 1000 cycles. Based on its high specific capacitance, the NiO-porous carbon nanocomposite is one of the most promising electrode materials for supercapacitors, according to the above results., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

The development of new antimicrobial strategies that act more efficiently than traditional antibiotics is becoming a necessity to combat multidrug-resistant pathogens. Here we report the efficacy of laser-light-irradiated 5,10,15,20-tetrakis( m -hydroxyphenyl)porphyrin ( m THPP) loaded onto an ethylcellulose (EC)/chitosan (Chs) nanocomposite in eradicating multi-drug resistant Pseudomonas aeruginosa , Staphylococcus aureus , and Candida albicans. Surface loading of the ethylcelllose/chitosan composite with m THPP was carried out and the resulting nanocomposite was fully characterized. The results indicate that the prepared nanocomposite incorporates m THPP inside, and that the composite acquired an overall positive charge. The incorporation of m THPP into the nanocomposite enhanced the photo- and thermal stability. Different laser wavelengths (458; 476; 488; 515; 635 nm), powers (5-70 mW), and exposure times (15-45 min) were investigated in the antimicrobial photodynamic therapy (aPDT) experiments, with the best inhibition observed using 635 nm with the m THPP EC/Chs nanocomposite for C. albicans (59 ± 0.21%), P. aeruginosa (71.7 ± 1.72%), and S. aureus (74.2 ± 1.26%) with illumination of only 15 min. Utilization of higher doses (70 mW) for longer periods achieved more eradication of microbial growth.

The current work focuses on a cheap and simple preparation of highly conducting chitosan/hydroxyl ethylcellulose/polyaniline loaded with graphene oxide doped by silver nanoparticles (CS/HEC/PAni/GO@Ag) bionanocomposite as a biodegradable and biocompatible hydrogel for energy storage technology. Scanning electron microscopy (SEM) displays the compatibility of chitosan, hydroxyl ethyl cellulose, and polyaniline and a good distribution of GO@Ag-NPs in bionanocomposite hydrogels. X-ray diffraction (XRD) displayed the structure and existence of GO@Ag-NPs in the matrix. The swelling percentage and the antibacterial activities slightly increased with raising the content of GO@Ag-NPs. Also, the presence of both chitosan and cellulose improves the biodegradation of the fabricated bionanocomposites, which is increased by adding GO. Moreover, the incorporation of 5% GO@Ag-NPs in hydrogels enhances dc-conductivity by about 25 times from 3.37 × 10 -3 to 8.53 × 10 -2 S/cm. The fabricated hydrogels are inexpensive, eco-friendly, and have high capacitance and permittivity, and so they can store electrical energy., Competing Interests: Declaration of competing interest The authors declare that there is no conflict of interest to be disclosed in this work., (Copyright © 2020 Elsevier B.V. All rights reserved.)

There is a high demand for high performance, effective and eco-friendly corrosion inhibitors for industrial applications. Therefore, novel benign high performance corrosion inhibitors based on biopolymer were synthesized in-situ using different cellulosic materials and niacin. Characterization of the cellulose nano-composite was carried out by Fourier transform infrared (FTIR), thermal gravimetric analysis (TGA), dynamic light scattering (DLS), scanning electron microscopy (SEM) and energy dispersive X-ray (EDX). The anticorrosive performance of cellulose composites for copper in 3.5% NaCl solutions were evaluated using polarization and electrochemical impedance spectroscopy (EIS) techniques. Surface morphology of uninhibited and inhibited composites was studied using SEM and EDX. Potentiodynamic polarization measurements confirmed that cellulose based inhibitors act as a mixed type inhibitor. The inhibition efficiency of ethyl cellulose-niacin composite (NEC) was 94.7% outperforms those of microcrystalline cellulose-niacin composite (NMCC) and carboxymethyl cellulose-niacin composite (NCMC) which were 33.2 and 83.4%, respectively, as green corrosion inhibitors for Copper in 3.5% NaCl solutions. The data extracted from EIS were fitted through an equivalent circuit to model the corrosion inhibition., (Copyright © 2020 Elsevier B.V. All rights reserved.)

A new eco-friendly compound was prepared for the treatment of textile wastewater containing mixed dyes with various ranges of toxicity. Porous silica was extracted from a black liquor by-product using a simple method and characterized by porous morphology (the pore size ranged between 12 and 41 nm). The silica is the main corrosive agent present in the black liquor; thus, the extraction of silica from the black liquor was considered detoxification process. The extracted porous silica was used as a precursor material to prepare the hybrid material based on polyvinyl alcohol (PVA) as a binder polymer and functionalized by nicotinic acid. The multifunction prepared hybrid was characterized by FT-IR, TGA, DTGA, SEM, and EDX. The porous size of the prepared hybrid varied from 96 nm to 620 nm and presents a high thermal stability in comparison with its parent materials. The adsorption of cationic and anionic dyes was carried out. The adsorption kinetics parameters were fitted with pseudo-first-order and pseudo-second-order kinetic models for methyl orange (MO) and methylene blue (MB), respectively. The adsorption parameters indicated that the Langmuir model is better to describe the adsorption of dyes on the hybrid material. The maximum adsorption capacity was 484 and 771 mg/g for MO and MB, respectively.

The present study deals with novel synthesizing method of TEMPO oxidized cellulose (extracted from bagasse) (TOC) amino acids (l-phenyl alanine (Phe) and l-tryptophan (Trp)) nano-composites as potential antimicrobial biocompatible agents. The produced nanocomposites were characterized via Fourier transform Infrared (FT-IR) spectroscopy, thermal analysis (TGA and DTGA), scanning electron microscope(SEM), and transmission electron microscope (TEM) which approved that the synthesis of composites in nano-scale in spherical shape with average particle size 72 and 44.37 nm for l-phenylalanine composite (Phe-TOC) and l-tryptophan composite (Trp-TOC) respectively. The antimicrobial studies were carried out on (i) Gram-negative bacteria: Escherichia coli (NCTC-10416) and Pseudomonas aeruginosa (NCID-9016); (ii) Gram-positive bacteria: Streptococcus aurous (NCTC-7447) and Bacillus subtilis (NCID-3610); (iii) unicellular fungi: namely, Candida albicans (NCCLS 11). The results were cleared that the both composites have high effective, rapid and broad-spectrum antimicrobial activity. The Trp-TOC showed slightly higher antimicrobial activity than Phe-TOC especially in time required of killing performance. The Phe-TOC has required 20 h for killing all microbial population while Trp-TOC required only 12 h. The MIC values were close in both nanocomposites with high clear zone measurements in the same concentration in the case of Trp-TOC., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Watermelon peel waste (WPW) is a zero value material containing a high amount of nutrients that could be utilized in microbial growth medium production. In the present work, WPW was used to produce universal fungal growth medium with great nutritional profile to use instead of other expensive media particularly the Potato dextrose agar (PDA) medium. The mechanical and physical pretreatments were used to extract the growth medium from WPW. The main fiber composition was estimated as well as the elemental analysis and energy dispersive X-ray analysis (EDX) for the extracted medium. The total proteins, lipids and reducing sugars content were measured. The extracted WPW medium showed a high value of those macronutrients 9, 0.32 and 11 gl -1 respectively. The results of this study showed that mechanical pretreatment of WPW is the best for fungal growth; where the dry biomass obtained for Rhizopus oryzae, Lichtheimia corymbifera, Aspergillus niger, Penicillium expansium and Fusarium oxysporum were 1.53, 2.03, 2.37, 2.67 and 3.12 gl -1 respectively. Taguchi design was used to optimize the medium components. The optimum growth medium composition was prepared as follows; blending 500 gl -1 fresh WPW and 10 gl -1 of dextrose. Moreover dry biomass of R. oryzae on three liquid media namely watermelon peel waste dextrose (WPWD), Potato dextrose (PD) and Czapek , s dox (CzD) were 4.49, 4.16 and 2.39 respectively. Similarly, in the case of L. corymbifera, A. niger and P. expansium the dry biomass was increased on WPWD by 276, 267 and 250% respectively, while the dry biomass of F. oxysporum on WPWD was increased by 199%. Moreover, physicochemical properties of WPWDA medium are similar to PDA and CzDA. The formulated WPWDA medium is an alternative to commonly used media such as PDA and CzDA; and very effective for the growth of fungi, also this medium is eco-friendly and cheap., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Despite the advantages of bacterial cellulose (BC) over traditional cellulose, its low yield and little bioactivity makes a limitation to be used in an industrial scale. This paper was mainly dual aimed to increase the BC yield using a nanobioactive glass (NBG), and in situ synthesize BC/NBG bioactive nanocomposites by a novel and simple green method. Accordingly, the composites were prepared via in situ fermentation approach by incorporation of NBG particles into BC producing culture medium. The effect of NBG addition on the production process of cellulose, biocompatibility, bioactivity and antimicrobial activity were investigated. The results showed that NBG was enhanced and increased the BC yield and this has been achieved by maintaining these NBG on the pH value of the culture medium during the fermentation period. Moreover, it was effectively improved biocompatibility and antimicrobial properties of BC. This study evidenced that BC/NBG composite can be expected to be widely applied in biomedical industries such as bone regeneration and wound healing with the unique of being not harmful to humans., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Biodegradable, antimicrobial, and semiconducting cellulosic composite was synthesized by in-situ polymerization of polyaniline in the presence of cellulose. The cobalt ferrite nanoparticles (CFO-NPs) were added during the polymerization process to acquire this composite magnetic property. The CFO-NPs were prepared by sol-gel method with average particles size less than 50 nm. The nanocomposites were characterized by Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX). In addition, their magnetic, dielectric constant, dielectric loss, and conductivity behaviors were studied. The magnetization (M s ) and conductivity increased up to 3.7 emu/g and 3.5 × 10 -3  S/cm, respectively, with increasing CFO-NPs content. The prepared electromagnetic nanocomposite exhibits highly efficient biodegradability and antimicrobial activity against Escherichia coli, Bacillus subtilis, and Candida albicans. The antimicrobial activity increased with increasing CFO-NPs while the biodegradability decreased., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Potato peel waste (PPW) is employed as the first report on bacterial cellulose (BC) production by Gluconacetobacter xylinus. Scharification of PPW was performed by 2 M different mineral acids individually. The suitable pre-treatment conditions were determined by reducing sugar release. Although all acid PPW-hydrolysates culture media are studied to produce BCs. Nitric acid hydrolysate gives the high productivity value The influence of nitric acid PPW-hydrolysate culture condition parameters were applied throughout the Taguchi method and the optimum conditions for the highest BC yield (4.7 g/L) was observed after 6 days at 35 °C, pH 9, medium volume 55 ml and with 8% inoculum size. The instrumental analysis of PPW-BC, included FT-IR, Particle size distribution, BET, DSC, XRD and SEM are cleared that the PPW-BC recorded high crystalliny82.5%, excellent PDI. In general, this study revealed that nitric acid PPW-hydrolysate could be used as cost effective alternative medium for production of BC with sustainable processes that can overcome the environmental pollution., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Lignocellulosic fibers, which obtained from Citrus trees trimmings, were modified with Aspergillus flavus (EGYPTA5) enzymes. The non-modified and the modified lignocellulosic fibers were used with low density polyethylene (LDPE) by melt blending brabender method at 170 °C with different ratio (5, 10 and 20 wt%) to obtain wood plastic composites (WPC). The prepared samples were characterized using Fourier-transformed infrared (FT-IR), Scan Electron Microscope (SEM), and Water vapor transmission rate (WVTR) as well as, the mechanical, thermal, biodegradability and swelling properties were examined. The fabricated WPC displayed good mechanical and thermal properties compare with pure LDPE. Also, the WVTR was enhanced by the addition of modified lignocellulosic fibers over the unmodified one. Moreover, the enzymes assay such as cellulase and lignin peroxidase enzymes were estimated and confirming the growing of fungi on the lignocellulosic fiber in solid state fermentation condition to improve lignin peroxidase production and eliminate cellulose enzymes. The fabricated WPC can be used in different environmental application such as packaging system, that it will be green, economic, and partially biodegradable.

This article deals with evaluating the role of cellulose origin, from wood and non-wood, on preparing green CMC-Ag complex as biological active agent. Viscose pulp as well as bagasse and rice straw pulps were used in preparation of CMCs, followed by complexation with AgNO 3. The complex structure (free-Ag, IR-spectra and TGA), morphology (TEM), antibiological and anti-tumor activities were studied. The data revealed that, the main interaction between CMC and silver is occurred via carboxylate groups and ether link of 1ry alcohol, with formation stable 5-membered ring structure. For the case of RS-based CMC-Ag complex the interaction between COO groups and silica included RS is also possible, via hydrogen bonds. These complexes have anti-biological especially towards gram positive bacteria (B.subtilis, NCID-3610), and uni- and multi cellular fungi. AgNPs from viscose (VCMC-Ag complex) has relatively higher anti-tumor activity for breast cancer MCF-7 in vitro than bagasse-based CMC-Ag complex (BCMC-Ag complex) with IC 50 128μg/ml (as Ag). It is interesting to note that; viscose-based CMC-Ag complex (VCMC-Ag) has higher efficient behaviour as bioactive agent than literature reported agents, e.g., Pyridine derivative (∼300μg/ml)., (Copyright © 2017 Elsevier B.V. All rights reserved.)

The present study deals with synthesizing novel cellulose derivative, from modifying the carboxymethyl cellulose with amino phenylpropanoic acid (CMC-APP). The synthesized CMC-APP was evaluated as biological and anti-cancer active compound. The molecular structures of this active compound were built using the HyperChem program 7.5, together with conventional analysis (nitrogen content, FT-IR, and non-isothermal TGA analysis). Optimizing the CMC/APPA ratio was carried out as preliminary assessment step, via undetected antimicrobial activity measurement. The TEM study showed that, the synthesized cellulose CMC-APP derivative in the nano-scale particle size (range from 12.5 to 89.3nm). Among all the tested microorganisms and MCF-7 breast cancer cells, the synthesized nano-cellulose derivative is possible used as safety medicine for microbial infections and cancers. The minimal inhibitory concentration (MIC) for Gram-positive bacteria, and gram-negative bacteria are 48.82μg/mL and 97μg/mL, respectively. While, the unicellular fungi and filamentous fungi are 12.2μg/mL and 97.65μg/mL, respectively. The cytotoxic index (IC50) for MCF-7 breast cancers is 50μg/mL. Moreover, the computational study of ADMET (absorption, distribution, metabolism, elimination and toxic) properties, of the molecules showed that, this investigated nano-compound is good oral bioavailability., (Copyright © 2016 Elsevier Ltd. All rights reserved.)