Search

The ability to reproduce a specified head-on-trunk position can be an indirect test of cervical proprioception. This ability is affected in subjects with neck pain, but it is unclear whether and how much pain or continuous muscle contraction factors contribute to this effect. We studied the influence of a static unilateral neck muscle contraction task (5 min of lateral flexion at 30% of maximal voluntary contraction) on head repositioning ability in 20 subjects (10 women, 10 men; mean age 37 years) with healthy necks. Head repositioning ability was tested in the horizontal plane with 30 degrees target and neutral head position tests; head position was recorded by Zebris((R)), an ultrasound-based motion analyser. Head repositioning ability was analysed for accuracy (mean of signed differences between introduced and reproduced positions) and precision (standard deviation of the differences). Accuracy of head repositioning ability increased significantly after the muscle contraction task, as the normal overshoot was reduced. An average overshoot of 7.1 degrees decreased to 4.6 degrees after the muscle contraction task for the 30 degrees target and from 2.2 degrees to 1.4 degrees for neutral head position. The increased accuracy was most pronounced for movements directed towards the activated side. Hence, prolonged unilateral neck muscle contraction may increase the sensitivity of cervical proprioceptors.

Goniometry of the wrist is a feasible method for studying wrist movements in most hand-intensive work. The precision and accuracy of the method per se is good. For the knowledge on validity of field measurements, the size of imprecision is of importance. This study evaluated this condition during standardized circumstances. Six women performed three different hand-intensive work tasks: 'materials picking', 'light assembly', and 'heavy assembly', repeated during three different days. Variance components between-days (within subjects) and between-subjects were derived for positions (flexion/extension and deviation) and movements, including angular velocities, % of time with very low velocity (<1 degree /s), as well as repetitiveness. For positions, the average standard deviations in the three tasks were, both between-days and between-subjects, 3-4 degrees . For movements, the coefficients of variation of angular velocities were about 10% between-days, and could to a great part be explained by differences in work rate. Between-subjects variability was higher, 20-40%. The variability was larger at low velocities than at high ones. The precision of the measured positions was good, expressed as small between-days and between-subjects variability. For movements, the between-days variability was also small, while there was a larger between-subjects variability. The imprecision of goniometry is consequently lower and comparable with inclinometry but lower than for EMG.

This paper combines epidemiological data on musculoskeletal morbidity in 40 female and 15 male occupational groups (questionnaire data 3720 females, 1241 males, physical examination data 1762 females, 915 males) in order to calculate risk for neck and upper limb disorders in repetitive/constrained vs. varied/mobile work and further to compare prevalence among office, industrial and non-office/non-industrial settings, as well as among jobs within these. Further, the paper aims to compare the risk of musculoskeletal disorders from repetitive/constrained work between females and males. Prevalence ratios (PR) for repetitive/constrained vs. varied/mobile work were in neck/shoulders: 12-month complaints females 1.2, males 1.1, diagnoses at the physical examination 2.3 and 2.3. In elbows/hands PRs for complaints were 1.7 and 1.6, for diagnoses 3.0 and 3.4. Tension neck syndrome, cervicalgia, shoulder tendonitis, acromioclavicular syndrome, medial epicondylitis and carpal tunnel syndrome showed PRs > 2. In neck/shoulders PRs were similar across office, industrial and non-office/non-industrial settings, in elbows/hands, especially among males, somewhat higher in industrial work. There was a heterogeneity within the different settings (estimated by bootstrapping), indicating higher PRs for some groups. As in most studies, musculoskeletal disorders were more prevalent among females than among males. Interestingly, though, the PRs for repetitive/constrained work vs. varied/mobile were for most measures approximately the same for both genders. In conclusion, repetitive/constrained work showed elevated risks when compared to varied/mobile work in all settings. Females and males showed similar risk elevations. This article enables comparison of risk of musculoskeletal disorders among many different occupations in industrial, office and other settings, when using standardised case definitions. It confirms that repetitive/constrained work is harmful not only in industrial but also in office and non-office/non-industrial settings. The reported data can be used for comparison with future studies.

Flexible goniometers are useful for direct movement measurements. Crosstalk due to rotation between the endblocks is well known. However, even without any rotation, some crosstalk can occur. The objective of this study was to elucidate the effect of, and compensate for, the inherent crosstalk in biaxial goniometers, with specific relevance for applications with one dominating movement direction. Six biaxial goniometers (M110, Biometrics Ltd., Gwent, UK) were evaluated. A precision jig, for simulating pure flexion/extension angles, was constructed. Each sensor produced a consistent and specific crosstalk pattern, when tested over a +/-100 degrees range of motion. A procedure for correction for the inherent crosstalk of individual goniometer, based on polynomial adjust, is presented. The method for compensation, which reduced the root mean square error from, on average for the six goniometers, 3.7 degrees (range 1.8-10.1 degrees) to 0.35 degrees (0.12-0.55 degrees), might be required for obtaining valid goniometer measurements, e.g. of valgus/varus of the knee during gait flexion/extension movements.

Objectives: For unknown reasons, females run a higher risk than males of work-related musculoskeletal disorders. The aim of this study was to evaluate whether male and female workers, with identical repetitive work tasks, differ concerning risk of disorders, physical or psychosocial exposures., Methods: Employees in two industries were studied; one rubber manufacturing and one mechanical assembly plant. These industries were selected since in both, large groups of males and females worked side by side performing identical repetitive work tasks. Physical exposure was measured by technical equipment. Postures and movements were registered by inclinometry for the head and upper arms, and by electrogoniometry for the wrists. Muscular activity (muscular rest and %max) was registered by surface electromyography for m. trapezius and the forearm extensors (18 males and 19 females). Psychosocial work environment was evaluated by the demand-control-support model (85 males and 138 females). Musculoskeletal disorders were assessed (105 males and 172 females), by interview (last 7-days complaints), and by physical examination (diagnoses)., Results: Concerning physical exposure, females showed higher muscular activity related to maximal voluntary contractions [(%MVE); m. trapezius: females 18 (SD 9.2), males 12 (SD 4.3); forearm extensors: females 39 (SD 11), males 27 (SD 10), right side, 90th percentile]. Working postures and movements were similar between genders. Also, concerning psychosocial work environment, no significant gender differences were found. Females had higher prevalences of disorders [complaints: age-adjusted prevalence odds ratio (POR) 2.3 (95% CI 1.3-3.8) for neck/shoulders, 2.4 (1.4-4.0) for elbows/hands; diagnoses: neck/shoulder 1.9 (1.1-3.6), elbows/hands 4.1 (1.2-9.3)]. In 225 workers, PORs were adjusted for household work, personal recovery and exercise, which only slightly affected the risk estimates., Conclusion: In identical work tasks, females showed substantially higher muscular activity in relation to capacity, and higher prevalence of musculoskeletal disorders of the neck and upper extremity, than did males.

Unlabelled: Prolonged computer work with an extended neck is commonly believed to be associated with an increased risk of neck-shoulder disorders. The aim of this study was to compare neck postures during computer work between female cases with neck-shoulder disorders, and healthy referents. Based on physical examinations, 13 cases and 11 referents were selected among 70 female air traffic controllers with the same computer-based work tasks and identical workstations. Postures and movements were measured by inclinometers, placed on the forehead and upper back (C7/Th1) during authentic air traffic control. A recently developed method was applied to assess flexion/extension in the neck, calculated as the difference between head and upper back flexion/extension., Results: cases and referents did not differ significantly in neck posture (median neck flexion/extension: -10 degrees vs. -9 degrees ; p=0.9). Hence, the belief that neck extension posture is associated with neck-shoulder disorders in computer work is not supported by the present data.

The purpose of this study was to describe, and analyse the effect of an intervention on, the biomechanical workload in the neck and shoulder region of female hairdressers. Arm elevation was measured by inclinometers and muscular load of m. trapezius by electromyography. The intervention comprised working technique recommendations, e.g. to work with less elevated arms and more relaxed muscles. The subjects were randomised between two different intensity levels of the intervention, one with written information only and the other with additional personal follow-up. The effect of the intervention was evaluated after 1-2 months. The hairdressers worked with their arms elevated 60 degrees or more for approximately 13% of the total working time and 16% during the specific hairdressing tasks. The intervention group including personal follow-up instructions had a reduction in workload from 4.0% to 2.5% of hairdressing time with highly elevated right upper arm, i.e. above 90 degrees . No effect was detected on muscular load or neck and shoulder symptoms after the intervention.

Objectives: To clarify if differences in the physical workload, the psychosocial factors and in musculoskeletal disorders can be attributed to work organizational factors., Methods: The physical workload (muscular activity of m. trapezius, positions and movements of the head, upper arms and wrists and heart rate) was assessed in 24 female hospital cleaners working in a traditional work organization (TO) and in 22 working in an extended one (i.e. with an enlarged work content and more responsibilities; EO). The psychosocial work environment was assessed as job demand, decision latitude and social support in 135 (TO) and 111 (EO) cleaners, and disorders of the neck and upper extremity by a physical examination., Results: The EO group was associated with lower physical workload, in terms of heart rate ratio (23 vs 32; P<0.001), head and upper arm positions and movements (right upper arm, 50th percentile, 35 degrees/s vs 71 degrees/s; P<0.001) and wrist movements (20 degrees/s vs 27 degrees/s; P=0.001), than the TO group. The EO group reported higher decision latitude and lower work demand than the TO one, while we found no difference in social support. The prevalence of complaints and diagnoses in neck/shoulders were lower in the EO group (diagnoses 35% vs 48%; P=0.04). Moreover, the prevalence of subjects with at least ten physical finding in elbows/hands was lower in the EO group (10 vs 29; P<0.001)., Conclusion: Hospital cleaners have a high prevalence of neck and upper limb disorders and a high physical workload. Comparing two groups of cleaners, with differences in the way of organizing the work, lower physical workload, more beneficial psychosocial factors and a better musculoskeletal health was found in the group with an extended organization. Hence, the differences found can be attributed to the organizational factors.

Knee kinematics after anterior cruciate ligament (ACL) reconstruction is of interest in studies evaluating the effect of training programs. Many studies have addressed knee flexion/extension but not valgus/varus movements. Considering that joint stability is a major concern in ACL reconstruction surgery, movements occurring in the frontal plane of the knee also deserve attention. Knee extensor torque was analyzed by an isokinetic dynamometer and the angular amplitudes and velocities of flexion/extension and valgus/varus movements were analyzed by goniometry during gait 9 months after ACL reconstruction. The analysis was repeated after 3 months of eccentric isokinetic training of the quadriceps in five patients. The gait pattern was also recorded for 10 healthy controls. The knee extensor torque and flexion/extension range of movement during gait increased significantly after training. However, an unexpectedly increased valgus, most pronounced during the swing phase, which may imply adverse effects on the knee, was also observed in the ACL reconstructed knee. The recorded valgus angles may however be overestimated due to crosstalk. Thus, the extent of the increased valgus, as well as the mechanisms involved and the functional and clinical implications, need clarification before eccentric training after ACL reconstruction can be generally recommended.

Operators with identical, demanding computer work (90 female and 97 male air traffic controllers) were found to have high prevalences of disorders (assessed by questionnaire and physical examination) in neck, shoulders and upper back. In spite of the identical work, the women displayed higher prevalences than the men (e.g. neck diagnoses 21% vs. 4%). Disorders in elbows, wrists and hands were less common, with similar rates in both genders. Generally, the psychosocial work environment (assessed by questionnaire) was found to be good, but with large inter-individual variation. Women experienced lower decision latitude than men, particularly regarding influence and freedom at work, but perceived higher social support. Physically, the work was characterized by relatively low angular velocities of upper arms (measured by inclinometry) and wrists (right: < 1 degrees/s during 19% of time, measuring by goniometry), dynamic muscular activities and high time fractions of rest in the trapezius and forearm extensor muscles (measuring by electromyography). There were only minor differences between the genders.

For measuring the physical exposure/workload in studies of work-related musculoskeletal disorders, direct measurements are valuable. However, the between-days and between-subjects variability, as well as the precision of the method per se, are not well known. In a laboratory, six women performed three standardised assembly tasks, all of them repeated on three different days. Triaxial inclinometers were applied to the head, upper back and upper arms. Between-days (within subjects) and between-subjects (within tasks) variance components were derived for the 10th, 50th and 90th percentiles of the angular and the angular velocity distributions, and for the proportion of time spent in predefined angular sectors. For percentiles of the angular distributions, the average between-days variability was 3.4 degrees , and the between-subjects variability 4.0 degrees . For proportion of time spent in angular sectors, the variability depended on the percentage of time spent in the sector; the relative variability was scattered and large, on average 103% between days and 56% between subjects. For the angular velocity percentiles, the average between-days variability was 7.9%, and the average between-subjects variability was 22%. The contribution of the measurement procedure per se to the between-days variability, i.e., the imprecision of the method, was small: less than 2 degrees for angles and 3% for angular velocity.

To obtain quantitative estimates of the physical workload in epidemiological and intervention studies of musculoskeletal disorders, there is a need to extend task based exposure data to job exposure profiles. For this purpose a work task diary was developed and evaluated. This was validated against direct observations of a day's work for twenty-two female office workers and twenty female hospital cleaners. There was a good agreement regarding the occurrence of the main tasks. However, the less time-consuming tasks were under-reported. Moreover, about two thirds of the changes between tasks were not reported. The difficulties of defining tasks that function as occupational entities seems to be a major reason for the lack of agreement. The underestimation of the duration of breaks/pauses was most pronounced for the cleaners. Still, the diary would be useful for the calculation of job exposure, by time-weighting task exposure data, when the tasks and/or their duration vary between days.

Though surface electromyography (EMG) has been widely used in studies of occupational exposure, its precision in terms of the variance between-days and between-subjects has seldom been evaluated. This study aimed at such an evaluation. Six women performed three different work tasks: 'materials picking', 'light assembly', and 'heavy assembly', repeated on 3 different days. EMG was recorded from m. trapezius, m. infraspinatus and the forearm extensors. Normalisation was made to a maximal (MVE), and a submaximal (RVE), reference contraction. Variance components between days (within subjects) and between subjects were derived for the 10th, 50th and 90th percentiles, as well as for muscular rest parameters. For the task 'heavy assembly', the coefficient of variation between days (CV(BD)) was 8% for m. trapezius (right side, 50th percentile, MVE normalised values). Larger variabilities were found for m. infraspinatus (CV(BD) 15%), and the forearm extensors (CV(BD) 33%). Between-subjects variability (CV(BS)) was greater, 16% for m. trapezius and 57% for m. infraspinatus, 29% for the forearm extensors. RVE normalisation resulted in larger CV(BD), while reducing CV(BS). The between-days and between-subjects variability may be used to optimise sampling strategy, and to assess the bias in epidemiological studies. The bias caused by measurement procedures per se is acceptable.

Flexible biaxial goniometers are extensively used for measuring wrist positions and movements. However, they display an inherent crosstalk error. The aim was to evaluate the effect, of this error, on summary measures used for characterizing manual work. A goniometer and a torsiometer were combined into one device. An algorithm that effectively compensated for crosstalk was developed. Recordings from 25 women, performing five worktasks, were analyzed, both with and without compensation for crosstalk. The errors in the 10th, 50th and 90th percentiles of the flexion/extension distributions were small, on average <1 degrees. The ulnar/radial deviation distributions were weakly dependent on forearm position. The flexion/extension velocity measures were, for the 50th and 90th percentiles, as well as the mean velocity, consistently underestimated by, on average, 3.9%. For ulnar/radial deviation, the velocity errors were less consistent. Mean power frequency, which is a measure of repetitiveness, was insensitive (error <1%) to crosstalk. The forearm supination/pronation angular distributions were wider, and the velocities higher, than for the wrists. Considering wrist/hand exposure in epidemiologic studies, as well as for establishing and surveillance of exposure limits for prevention of work-related upper extremity musculoskeletal disorders, the crosstalk error can, when considering other errors and sources to variation, be disregarded.

This study compares questionnaire assessed physical activity with direct technical measurements among cleaners and office workers, stratified regarding age, gender and self-reported neck/shoulder complaints. During two full working days number of steps was recorded by a pedometer, sitting/standing positions by a posimeter and heart rate by a Sport-Tester. In addition the subjects kept a work task diary for 10 days. There were high intra-individual variations in exposure between the days. Subjects with complaints rated their exposure higher than those without, although they in fact showed lower direct measured exposure. This may imply underestimation of exposure-effect relationships. Rate of perceived exertion showed low correlation with heart rate ratio within the two occupational groups, but high, 0.64 when the two groups were combined. Age and complaints explained 31% of the variance for the cleaners.

Objective: To examine the relation between muscular tenderness and local muscular fatigue., Design: Before-after trial, measuring pressure pain thresholds and signs of local muscular fatigue by using surface electromyography before, after, 10 minutes after, and 20 minutes after intervention., Setting: University rehabilitation department in Sweden., Participants: Nineteen female hospital cleaners with unilateral chronic shoulder pain for 1 year. No previous trauma, surgery, or signs of systemic or neurologic disease., Intervention: Static abduction endurance test with submaximal unilateral activation of the trapezius and deltoid muscles., Main Outcome Measures: Pressure pain thresholds and electromyographic fatigue parameters (root mean square [RMS]; mean power frequency [MPF])., Results: Mean normalized pressure pain threshold values increased significantly (95% confidence interval [CI]) and lasted for 20 minutes: in the trapezius, threshold values increased to 115% to 120% (95% CI, 100%-140%; P=.04-.05); and in the deltoid, the threshold increased to 112% to 115% (95% CI, 100%-130%; P=.02-.05). Development of significant electromyographically defined fatigue was seen: in the trapezius, the RMS increased to 130% (95% CI, 119%-141%), and in the deltoid, the MPF decreased to 78% (95% CI, 74%-82%), but normalized within 15 seconds to 10 minutes., Conclusion: Lasting bilateral increases in pressure pain thresholds but transient local muscular fatigue were seen after a unilateral static endurance test. The sensitivity of the sensory nervous system may change during a static muscle contraction and sometimes contributes to a localized sensation of numbness.

Surface electromyography (sEMG) is an important tool to estimate muscular activity at work. There is, however, a great inter-individual variation, even in carefully standardized work tasks. The sEMG signal is attenuated in the subcutaneous tissues, differently for each subject, which requires normalization. This is commonly made in relation to a reference contraction, which by itself, however, introduces a variance. A normalization method that is independent of individual motivation, motor control and pain inhibition would be desirable. The aim of the study was to explore the influence of the subcutaneous tissue thickness on sEMG amplitude. Ultrasound measurements of the muscle to skin surface distance were made bilaterally over the trapezius muscle in 12 females. Skinfold caliper measurements from these sites, as well as from four other sites, were made, body mass index (BMI) was recorded, and sEMG was recorded at maximal and submaximal contractions. The muscle-electrode distance, as measured by ultrasound, explained 33% and 31% (on the dominant and non-dominant sides respectively) of the variance of the sEMG activity at a standardized submaximal contraction (average between the sides, 46%); for maximal contractions the explained variance was 21%. Trapezius skinfold measurements showed poor correlations with sEMG. Instead, the mean of skinfold measurements from other sites explained as much as 68% (submaximal contraction). The corresponding figure for BMI was 67%. In conclusion, skinfold thickness explains a major part of the inter-individual variance in sEMG amplitude, and normalization to this measure is a possibility worth further evaluation.

Wrist positions and movements were measured and a physical examination was conducted in 12 female operators in an industrial quality-control work. The handled products are of very low weight, thus, the work can be considered as non-forceful. The work was highly repetitive; 0.54Hz for the right wrist/hand and 0.41Hz for the left. The angular velocities were also high; for the right wrist/hand median value was 30 degrees /s and peak value 108 degrees /s, for the left wrist/hand 24 degrees /s and 88 degrees /s, respectively. The frequency of musculoskeletal disorders was high, especially for the right wrist/hand. Although the work was non-forceful and there were minor extreme positions in the wrists, the results are consistent with reported exposure-response relations in other high-risk jobs. Thus, the repetitiveness and the high velocities are the likely causes for the high prevalence of disorders in the wrists/hands among the operators.

The aim of this study was to investigate the possible associations between working technique, sex, symptoms and level of physical load in VDU-work. A study group of 32 employees in the editing department of a daily newspaper answered a questionnaire, about physical working conditions and symptoms from the neck and the upper extremities. Muscular load, wrist positions and computer mouse forces were measured. Working technique was assessed from an observation protocol for computer work. In addition ratings of perceived exertion and overall comfort were collected. The results showed that subjects classified as having a good working technique worked with less muscular load in the forearm (extensor carpi ulnaris p=0.03) and in the trapezius muscle on the mouse operating side (p=0.02) compared to subjects classified as having a poor working technique. Moreover there were no differences in gap frequency (number of episodes when muscle activity is below 2.5% of a reference contraction) or muscular rest (total duration of gaps) between the two working technique groups. Women in this study used more force (mean force p=0.006, peak force p=0.02) expressed as % MVC than the men when operating the computer mouse. No major differences were shown in muscular load, wrist postures, perceived exertion or perceived comfort between men and women or between cases and symptom free subjects. In conclusion a good working technique was associated with reduced muscular load in the forearm muscles and in the trapezius muscle on the mouse operating side. Moreover women used more force (mean force and peak force) than men when operating the click button (left button) of the computer mouse.

Direct technical measurements of physical workload have advantages in studies of work-related musculoskeletal disorders. A data logger has been developed, based on 20 and 40 Mbyte PCMCIA (Personal Computer Memory Card International Association) flash memory cards, for electromyography (EMG), inclinometry and goniometry. They are provided with an input for marking of events that can be used for synchronization with other loggers and with video recordings. To make the data easier to access by the preceeding analysis software, application software has also been developed that reorganizes the data. The loggers are easy to operate and enable whole-day ambulatory field recordings without any need for reduction or compression of the data.

This ergonomics exposure assessment study compared the efficiency of eight 1-day-only strategies, that is, the relationship between the number of data collected per subject and the precision of the resulting mean exposure estimate. Whole-day electromyographic recordings from the right upper trapezius muscle in 24 cleaners and 23 office workers were processed to give minute-by-minute values of gap time and jerk time-parameters representing the level and frequency dimensions of muscle activation, respectively. On-site observations provided data on time spent in each of eight exhaustive task categories in the job, seven of which were associated with activities during work, and the last comprising breaks. On average, sampling at fixed intervals without regard to tasks doubled efficiency as compared with random sampling, which in turn was several times as efficient as consecutive sampling. Stratified sampling according to the two broad categories, work and breaks, increased efficiency for random and fixed-interval sampling, but the gain was distinct only among cleaners (about 20%). The commonly used strategy in ergonomic studies of sampling consecutively for short periods within tasks was highly inefficient. Further classification of work into the seven subcategories resulted in marginal additional increases in efficiency; on average less than 2%. A decision algorithm is given for determining appropriate sampling strategies in different types of jobs.

With the use of electrogoniometers wrist positions and movements were measured in 13 milkers while working in a modern rotary milking system. The rotary system put considerable demands on the wrists and hands regarding both velocities and repetitiveness. Values were found close to those described in other repetitive industrial work with high risk of wrist and hand disorders. For the right hand the repetitiveness was 0.57 Hz and 0.46 Hz for the left hand. In addition, the median value (50th percentile) of the angular velocity distribution was also high, being 36 degrees /s for the right hand and 26 degrees /s for the left, and with respect to the peak value (90th percentile) the corresponding values were 155 degrees /s and 135 degrees /s, respectively. Furthermore, when milking in the rotary system, there was less possibility to hold the hands still than in the other milking systems. The right hand rested only 1.4% of the milking time and the left only 1.0%. The hands were therefore moving throughout almost the entire milking procedure. High velocity, repetitiveness and fewer opportunities for rest are risk factors that might lead to disorders in the wrists and hands. Regarding wrist positions, the left wrist was held in a more dorsiflexed position than the right, 37 degrees and 29 degrees, respectively. Compared with tethering and loose-housing parlour milking, the wrist positions were, however, improved in the rotary system. When introducing new milking systems these negative effects on wrist and hand movements must be borne in mind in order to minimize the prevalence of wrist and hand disorders.

Industrial interventions that focus on increased productivity may impair the ergonomics, on a workstation or individual level. This paper presents a method that characterises work time consumption and physical work load of manual work, using video recordings synchronised with physiological measurements of, e.g. muscular activity, and postures. The underlying idea was that it is possible to amalgamate technical and human aspects resulting in a synergetic evaluation. The method was developed through two case studies within the Swedish automotive industry, where manual materials handling was studied. A methodological result was that the synchronising procedure was sufficiently precise to allow work activities to be assigned significantly different levels of physical work load. These different levels may be used to predict physical work load in the design and change of production systems. It was concluded that the method is accurate enough to be a useful tool in industrial interventions.

Background: The Project on Research and Intervention in Monotonous work (PRIM) studied Danish workers for 3-4 years to determine the effects of monotonous work. The present study is a subset of that cohort and compares prevalence and incidence differences of carpal tunnel syndrome (CTS) between workers with highly repetitive work tasks and workers with varied work tasks., Methods: The baseline study included 731 participants. Follow-up examinations were performed after 6 and 18 months. The CTS diagnosis was based on symptom interviews and nerve conduction tests. The repetitiveness levels were determined with electrogoniometers and observation of cycle times., Results: The overall prevalence of CTS was 1.6% on the working hand and 0.7% on the other hand. There was a significantly increased risk of CTS for every 10-hr increase of repetitive non-forceful work (OR = 1.84; 95% CI = 1.06-3.19) on the working hand. This result, however, was based on few cases and a low prevalence in the control group. The overall annual CTS incidence was 0.62% on the working hand and 0.44% on the other hand. For the repetitive work tasks, the mean power frequencies ranged from 0.53 to 0.79 Hz., Conclusions: In the baseline study, highly repetitive work was associated with CTS. The CTS incidence was too low to perform any analyses of exposure differences., (Copyright 2002 Wiley-Liss, Inc.)

The aim was to evaluate (1) the physical workload on neck and upper limb in computer-aided design (CAD) work; (2) the impact of two applications (PROFESSIONAL-CADAM and PRO/Engineering) and (3) two input devices (computer mouse and keyboard), as well as (4) sitting and standing work positions. Fifteen CAD operators were interviewed and examined physically. For nine subjects, the physical workload was measured: electromyography (EMG) of trapezius and forearm extensor muscles, inclinometry of the head, the upper back and upper arms, as well as wrist goniometry. The muscular load was low in CAD work, but the inter-individual variation was considerable. Neither the positions were extreme, nor the movements. The applications, per se, did not have a large impact on the workload, but because of the need for different input devices the effect was strong. Using a keyboard meant higher angular velocities than using a mouse. Hence, when choosing a new software, which requires mainly a mouse as input device, this has to be balanced against the risk of disorders.

The aim was to study postures and movements during repetitive work using video-based observations and direct technical measurements (inclinometers and goniometers). A total of 21 healthy women from a poultry processing plant volunteered. Neck flexion > 20 degrees was registered during 92% of the recorded time with the observation method, while the corresponding value measured with the inclinometer was 65%. Different reference positions and different measured variables apparently contributed to the differences between the methods. Mean wrist position was measured to be 0 degrees in flexion-extension and 19 degrees in ulnar deviation. Differences between the methods in the registered hand positions were small. The number of repetitive movements/minute and mean power frequency (MPF) of the electrogoniometer data was significantly related, showing both variables to be relevant measures of repetitiveness. In conclusion, the observation method and the technical measurements supplemented each other well. A reduction in class categories was suggested for future observation methods.

There is a need for objective and quantitative methods for measuring posture and movement, so that, for instance, exposure-response relationships for work-related musculoskeletal disorders can be established. Inclinometry data have been obtained from triaxial accelerometers based on uniaxial solid-state accelerometers used in conjunction with a computer program to perform co-ordinate transformations. The transducer can be mounted in an arbitrary orientation on a body segment, since if two reference positions are recorded, the co-ordinate system of the transducer can be transformed to that of the body segment. The angular error of the system is small (1.3 degrees), the reproducibility is high (0.2 degrees), and the inherent angular noise is small (0.04 degrees) and independent of the orientation of the device. Under quasi-static conditions, the angular velocities can be derived from the inclinometry data. The angular and the angular-velocity errors can be approximated using the relative deviation of the acceleration magnitude from gravitation. For applications involving a high degree of movement, the accelerometer data are still valid, although they cannot be interpreted as inclination. Used in combination with the computer program, the transducer can be used to measure posture and movement under static and quasi-static conditions, which occur in most areas of occupational work. It is shown that spherical co-ordinates can be used to present the inclinometry data.

Objectives: This study compares questionnaire-assessed exposure data on work postures and movements with direct technical measurements., Methods: Inclinometers and goniometers were used to make full workday measurements of 41 office workers and 41 cleaners, stratified for such factors as musculoskeletal complaints. The subjects answered a questionnaire on work postures of the head, back, and upper arms and repeated movements of the arms and hands (3-point scales). The questionnaire had been developed on the basis of a previously validated one. For assessing worktasks and their durations, the subjects kept a 2-week worktask diary. Job exposure was individually calculated by time-weighting the task exposure measurements according to the diary., Results: The agreement between the self-assessed and measured postures and movements was low (kappa = 0.06 for the mean within the occupational groups and kappa = 0.27 for the whole group). Cleaners had a higher measured workload than office workers giving the same questionnaire response. Moreover, the subjects with neck-shoulder complaints rated their exposure to movements as higher than those without complaints but with the same measured mechanical exposure. In addition, these subjects also showed a general tendency to rate their postural exposure as higher. The women rated their exposure higher than the men did., Conclusions: The questionnaire-assessed exposure data had low validity. For the various response categories the measured exposure depended on occupation. Furthermore, there was a differential misclassification due to musculoskeletal complaints and gender. Thus it seems difficult to construct valid questionnaires on mechanical exposure for establishing generic exposure-response relations in epidemiologic studies, especially cross-sectional ones. Direct technical measurements may be preferable.

The aim of the study was to quantify the workload on the upper extremity for fundamental work tasks during machine milking. Eleven milkers working in a loose-housing system with a milking parlour participated in the study. Muscle activity for the biceps and the forearm flexors, as well as positions and movements of the wrists were simultaneously measured by electromyography and electrogoniometry while video-recording the work. The milking work was broken up in three main tasks "Drying (the cow's udder)", "Pre-milking (the first milk)" and "Attaching (the milking unit to the udder)" and three supplementary tasks. All three main tasks show high muscle load values and almost no time for rest. The highest load values for the biceps and flexor muscles were found during the tasks "Attaching, holding the milking unit" and "Drying", respectively. For 10% of the recording time, the milkers held active hands in 42 degrees dorsal flexion during the milking tasks "Pre-milking" and "Attaching" and in deviated positions exceeding 50% of their maximum values during "Attaching" and "Drying". The high muscle loads in combination with extreme positions and movements of the hand and forearm might contribute to the development of injuries among milkers. The result from the study aims to form a basis for technical improvements of the milking equipment to decrease the risk for arm wrist and hand disorders.

Owing to an orderly recruitment of motor units, low threshold type I fibres are presumed to be vulnerable in contractions of long duration. To study load on these fibres muscular rest was registered as the time fraction of electromyographic (EMG) activity below a threshold. Moreover, the frequency of periods with muscular rest, EMG gaps, was derived, since a low gap frequency has been shown to be a risk factor for musculoskeletal disorders. Trapezius EMG was registered in 24 female hospital cleaners, 21 female office workers and 13 male office workers during one working day. Cleaners have a high risk of neck/shoulder pain and had much less muscular rest than office workers measured as a percentage of total registered time (median value = 1.5%, range = 0.2-13% vs. median value = 12%, range = 0.0-32%, respectively). Gap frequency showed no difference between the two occupational groups. Both measures displayed a wide inter-individual variation. For the cleaners, some of the variance was explained by body mass index (BMI) and age, with lower values of muscular rest for older subjects with a high BMI. Among the office workers, low values of muscular rest and a high gap frequency were registered in subjects with a low subjective muscular tension tendency. Gender, strength, smoking, job strain, employment time and musculoskeletal symptoms had no impact on either EMG measure.

Physical workload [muscular load of the trapezius and infraspinatus muscles using electromyography (EMG), wrist positions and movements by electrogoniometers] and neck and upper limb disorders (from, for example, a physical examination) were studied in women with repetitive industrial work (n = 95) and referents (n = 74). The repetitive work displayed higher ratings for wrist movements, but not for EMG. The prevalences of neck, shoulder and wrist/hand disorders were elevated for women with repetitive work [age-adjusted prevalence odds ratios (PORs) 2.0-7.5]. For the left hand, high frequency of wrist movements (mean power frequency 0.53 Hz) was associated with a high prevalence of disorders (56%), as compared to low (0.28 Hz and 26%; POR 3.5). We found no consistent and significant effect of muscular load, on either neck or shoulder disorders. However, selection and other bias may have diminished our possibility to observe such effects. Psychosocial work environment factors were not confounding the results. Measurements of wrist movements may be used for identification of high-risk work tasks.

Objective: This study was undertaken to examine the relation between muscular tenderness measured as pressure pain thresholds (PPTs) and electromyographic (EMG) signs of fatigue before and after a local standardized static muscle contraction., Design: Pressure pain thresholds were measured in the shoulder region before, immediately after, and 10 minutes after a standardized static endurance test while monitoring the EMG signs of local muscular fatigue and its recovery. The study did not address local biochemical issues., Setting: The study was conducted at the Department of Rehabilitation, Lund University Hospital, Lund, Sweden., Subjects: Twenty-five healthy female volunteers without musculoskeletal problems participated in this study., Intervention: A static endurance test was performed, which consisted of a submaximal unilateral activation of the right trapezius and deltoid muscles for as long as possible., Outcome Measures: Bilateral PPTs over the trapezius and deltoid muscles were measured with an electronic pressure algometer. Established surface EMG parameters of local muscular fatigue were assessed. The Borg Rating of Perceived Exertion scale was used., Results: The average endurance time was 330 seconds. Immediately after the test, significant bilateral increases in the normalized PPTs over both muscles were found, although the increase was more pronounced on the test side: over the right trapezius muscle by 13% (p <0.001), over the right deltoid muscle by 23% (p <0.001), and over the left trapezius and deltoid muscles by 6% (p = 0.04) and (p = 0.009), respectively. These increases persisted 10 minutes after the end of the test. The subjects developed significant signs of fatigue as defined by EMG criteria in both muscles on the right side during the test. The recovery from fatigue was approximately half complete 15 seconds after the end of the test and complete or almost complete 10 minutes thereafter., Conclusions: Pressure pain thresholds over shoulder muscles remained elevated up to 10 minutes after a unilateral static endurance test. This time course was completely different from that of EMG-defined muscle fatigue, which showed a fast recovery. These findings indicate that the mechanisms of recovery from fatigue and nociception are independent of each other. The bilateral PPT increases might be explained by central antinociceptive mechanisms activated by static muscle work.

Surface electromyography (EMG) has been used extensively to estimate muscular load in studies of work related musculoskeletal disorders, especially for the trapezius muscle. The occurrences of periods of EMG silence (gaps), the time below a predetermined threshold level (muscular rest) and various percentiles of the amplitude distribution (APDF) are commonly used summary measures. However, the effects of the criteria used to calculate these measures (e.g., gap duration, threshold level, normalisation method) on the sensitivity of these measures to accurately differentiate work loads is not well known. Bilateral trapezius EMG was recorded, for a full workday, for 58 subjects following both maximal (MVE) and submaximal (RVE) reference contractions. Gap frequency, muscular rest, and percentiles were derived for eight fundamental work tasks. The calculations were performed using different gap duration criteria, threshold levels and normalisation methods.A gap duration of less than 1/2 s, and threshold level approximately 0.3% MVE for gap frequency, and approximately 0.5% MVE for muscular rest, were the criteria that optimised sensitivity to task differences. Minimal sensitivity to tasks and a high sensitivity to individuals was obtained using gap frequency with a threshold level of approximately 1% MVE. Normalisation to RVE, rather than MVE, improved sensitivity to differences between tasks, and reduced undesirable variability. Muscular rest was more sensitive to task differences than APDF percentiles.

High prevalence of hand and wrist symptoms has been found in females working with machine milking. Therefore the aim of this study was to quantify the positions and movements of the wrist during machine milking, and to compare tethering and loose-housing systems with respect to this. Biaxial electrogoniometers and data loggers were used for recording flexion and deviation angles of both the right and left wrists in 11 healthy milkers. For each individual 25 min of representative work was recorded in each system. High values of dorsiflexion and radial deviation were found, which might induce an increased risk of carpal tunnel syndrome. Moreover, the velocity and repetitiveness were close to those values described in repetitive work with a high risk of elbow and hand disorders in the fish-processing industry and giro-form data entry work. According to our findings, the load on the upper extremities has increased with respect to dorsiflexed hand position and repetitiveness when milking in the modern loose-housing milking system. This is probably due to the change of the working position and/or the higher productivity (number of cows that milked per time unit) in the loose-housing system as compared to the old-fashioned tethering system. These negative effects on wrist positions and movements should be considered when building new milking systems.

Objectives: This study analyzed the variation in physical work load among subjects performing an identical work task., Methods: Electromyographs from the trapezius and infraspinatus muscles and wrist movements were recorded bilaterally from 49 women during a highly repetitive industrial work task. An interview and a physical examination were used to define 12 potential explanatory factors, namely, age, anthropometric measures, muscle strength, work stress, and musculoskeletal disorders., Results: For the electromyographs, the means of the 10th percentiles were 2.2% and 2.8% of the maximal voluntary electrical activity (%MVE) for the trapezius and infraspinatus muscles, respectively. However, the interindividual variations were very large [coefficients of variation (CV) 0.75 and 0.62, respectively]. Most of the variance could not be explained; only height, strength, and coactivation of the 2 muscles contributed significantly (R2(adj)0.20-0.52). The variation was still large, though smaller (CV < or =0.63), for values normalized to relative voluntary electrical activity (RVE). For the wrist movements, the median velocity was 29 degrees per second, and the interindividual variations were small (CV < or =0.24). Six factors contributed to the explained variance (R2(adj)0.12-0.55)., Conclusions: The interindividual variation is small for wrist movements when the same work tasks are performed. In contrast, the electromyographic variation is large, even though less after RVE normalization, which reduces the influence of strength, than when MVE is used. Because of these variations, several electromyographs are needed to characterize the exposure of a specific work task in terms of muscular load, and individual electromyographs are preferable when the worker' s risk of myalgia is being studied.

Objective: To assess the work load in neck and upper limbs of dentists., Methods: Twelve right-handed female dentists (six with and six without a history of definite neck/shoulder disorders, pair-wise matched for age) were studied when performing authentic dental work. Electromyography (EMG) was used to quantify the muscular load of the shoulders bilaterally and of the right forearm. Positions and movements of the head and wrists were measured, using inclinometers and electrogoniometers., Results: During work, the median load for the right upper trapezium muscle was 8.4% of the maximal voluntary EMG activity (MVE); during 90% of the time the load was > or = 3.3% MVE ("static" load). The figures were somewhat lower on the left side (7.0% and 2.5% MVE, respectively). Subjects with disorders had over all lower load levels for the trapezius muscles, although not statistically significant at < 0.05, than those without disorders. During a standardized reference contraction for the trapezius, the load was 17% MVE, and the quotient between MVE and torque [normalized to maximal voluntary torque (MVC)] was 0.5. These figures may be used for transformations. The muscular load on the right forearm was similar to the loads on the trapezius. The head was, on average, forward tilted > or = to 39 degrees, and during 10% of the time > or = 49 degrees. The left hand was held in more static positions, with palmar flexion and ulnar deviation, also reflected by lower angular velocities and repetitiveness, as compared with the right one, which was dorsiflexed., Conclusions: Dentists are exposed to high load on the trapezius muscles bilaterally, and steep, prolonged forward bending of the head. Further, for the wrists the postures were constrained, but the dynamic demands were low.

In epidemiological studies of occupational musculoskeletal disorders there is a need for quantitative exposure measurements of the physical work load. In studies of neck and upper limb disorders the so-called cumulative trauma disorders (CTDs), in particular the carpal tunnel syndrome, the positions and movements of the wrist are of special interest. A biaxial flexible electrogoniometer was used to measure continuously, with a sampling rate of 20 Hz, wrist flexion/extension and abduction/adduction angles up to 27 min. Evaluation of the influence of rotation on the goniometer showed some inherent crosstalk, which, however, did not invalidate the results. For occupational repetitive work, 99.5% of the signal power was contained in the 0-5 Hz band. Two-dimensional angle distributions and power spectra gave comprehensive information about wrist postures and movements. Measures reflecting both static and dynamic properties were derived from time and frequency domains. These measures give quantitative information on different potential risk factors and are therefore useful in epidemiological studies. Mean power frequency (MPF) is suggested as a generalized measure of repetitiveness. The method was applied in field studies of fish processing industry workers with highly repetitive work and risk of CTD.

Inorganic mercury (InoHg) in whole blood and erythrocytes was determined by cold vapour atomic absorption spectrometry (CVAAS) after overnight treatment with sulfuric acid at 45 degrees C and reduction with SnII in the acidic mixture. Total mercury (TotHg) was determined after digestion with a mixture of nitric and perchloric acids. Mercury vapour was preconcentrated on an amalgamation trap made of gold wire. The mercury was rapidly released by inductive heating of the trap. InoHg could be determined specifically in the presence of methylmercury (MeHg). The concentration of MeHg could be calculated by subtracting the concentration of InoHg from that of TotHg. Calculated concentrations of MeHg in erythrocytes showed a strong correlation with the results of a gas chromatographic method, though a discrepancy in calibration was indicated. The detection limits (3 s) in blood (0.5 g) were 0.06 ng g-1 for TotHg and 0.04 ng g-1 for InoHg and S(r) for a 5 ng g-1 whole blood sample was 2% (n = 10) for both TotHg and InoHg.

Objective: The aim was to study the association between personal factors and physical and psychosocial work environment factors and disorders of the neck or upper limbs among women in the fish processing industry., Methods: A cross sectional study was performed on 206 women in the fish processing industry and 208 control women. Several physical and psychosocial work environment factors were evaluated. Subjective complaints about the neck or upper limbs were assessed by questionnaire and by a clinical examination., Results: The study showed a high prevalence (35%) of diagnoses in the neck or shoulders of the exposed women. All prevalence odds ratios (POR's) were substantially higher in young women. There was a pronounced dose-response relation between disorders of the neck or shoulders and duration of employment for women < 45 years old. When studying 322 former workers, the proportion who claimed musculoskeletal complaints as the reason for leaving was highest among the older women. Muscular tension, stress or worry, work strain, and the largest fraction of the work time spent with highly repetitive work tasks were clearly associated with disorders of the neck or shoulders. The measurements of the wrist movements also showed that the work was performed almost without any pauses and that the median flexion and extension velocity was high (41 degree/s). The results of observation showed good agreement with the measurements of wrist motion., Conclusion: Work in the fish processing industry is a risk factor for disorders of the neck and upper limbs. Due to the homogenity of the physical work load in the exposed group, we could not show any associations between the objective measurements and disorders. In cross sectional studies the risk may be underestimated due to a healthy worker effect.

EMG was recorded with surface electrodes from the trapezius and deltoid muscles during a static endurance test at approximately 20% of maximal voluntary contraction. Objective parameters for localized muscular fatigue were derived from the time course of the root mean square (RMS) and mean power frequency (MPF) of the EMG recordings. Isotonic regression is introduced as a tool for assessment of such parameters. The most pronounced sign of fatigue for trapezius was an increase in the RMS values, while for deltoid it was a decrease in the MPF values. This could be explained by the different functions of the two muscles. The endurance time for a group of 11 women in industrial work with repetitive short-cycled work tasks who were diagnosed with neck/shoulder disorders (tension neck) was significantly shorter (p less than 0.05) than for a group with the same work, but without neck/shoulder disorders (n = 11), and shorter than for a control group (n = 11). Regarding the EMG fatigue measures, there were no significant differences between the three groups. We did not find any relationships between endurance time and the EMG parameters. The results indicate that neck/shoulder disorders were not associated with divergent mechanisms for developing fatigue in the muscles, as recorded with surface EMG.

Magnetically controlled iron thrombosis has been attempted in rabbits. A horseshoe magnet across the jugular vein could arrest injected iron particles in the blood stream so that a well localized, solid thrombus developed. The connection between the strength and orientation of the magnetic field and the force developed on the iron particles was also investigated.

Ultrasonography is the accepted method of choice for registering foetal breathing movements in man. The conventional apparatus hitherto used for this purpose is disadvantageous and could yield misleading artefacts. A new differential echoscope has been designed and developed especially for recording intrauterine foetal movements. It allows a simultaneous registration of movements of two foetal structures: the proximal and distal thoracic wall, or the foetal heart and the thoracic wall. It is equipped with two alternately emitting transducers, each with a repetition frequency of 150 HZ, and an intensity-modulated display of the triggering echoes within the gates. Time-to-volgate converters transform the movements of two gated echoes into electrical signals. An internal differential circuit produces on-line recordings of the true difference between movements of the two selected echoes. This device will appreciably facilitate the selection of proper echoes and reduce signal artefacts during foetal monitoring. Various errors and pitfalls in measuring foetal breathing movements are discussed.

An instrument was developed for continuous measurement of thermal conductance reflecting blood flow locally in the endometrium. The probe consists of two small thermistors, one sensing the tissue temperature, and the other working at 5 degrees C elevated temperature, sensing the heat loss caused by thermal conduction mainly due to the blood flow. The power needed to keep this temperature difference was recorded as a measure of flow. When the instrument was tested in model experiments, for measurement of flows at temperatures of 35 to 40 degrees C, stable recordings with high sensitivity were obtained and no influence of the surrounding temperature was observed. Recordings were also made in vivo in non-pregnant women by applying the instrument to the endometrium of the uterine fundus. Intrauterine pressure was recorded simultaneously. The blood flow recordings were stable over long periods in spite of changes in body temperature, but with fluctuations of up to 0.1 mW concomitant with uterine contractions. Pulse-syncronous variations in flow were recorded, indicating a high sensitivity and a short time constant of the instrument. The blood flow effects of vasoactive substances, i.e. vasopressin and a vasopressin antagonist, could readily be distinguished. It is concluded that this instrument can be used for semi-quantitative recordings of blood flow in cavities of the body, for example the uterus, which can be reached by small probes and that changes of body temperature do not effect the measurements.