Search

Background and objective To take major advantage of erbium-doped yttrium aluminium garnet (Er:YAG) lasers in osteotomy-like freedom of cutting geometries and high accuracy-the integration and miniaturization of the robot, laser, and navigation technology was tried and applied to minipigs. The investigators hypothesized laser osteotomy would render acceptable bone healing based on the intraoperative findings and postoperative cut surface analysis. Study design/materials and methods We designed and implemented a comparative bone-cutting surgery in the minipig mandible with a cold ablation robot-guided Er:YAG laser osteotome (CARLO) and a piezoelectric (PZE) osteotome. The sample was composed of different patterns of defects in the mandibles of six grown-up female Goettingen minipigs. The predictor variable was Er:YAG osteotomy and PZE osteotomy. The outcome variable was the cut surface characteristics and bone healing at 4 and 8 weeks postoperatively. Descriptive and qualitative comparison was executed. Results The sample was composed of four kinds of bone defects on both sides of the mandibles of six minipigs. We observed more bleeding during the operation, open-cut surfaces, and a faster healing pattern with the laser osteotomy. There was a possible association between the intraoperative findings, postoperative cut surface analysis, and the bone healing pattern. Conclusions The results of this study suggest that characteristic open-cut surfaces could explain favorable bone healing after laser osteotomy. Future studies will focus on the quantification of the early healing characteristics after laser osteotomy, its diverse application, and the safety feature. Lasers Surg. Med. © 2020 Wiley Periodicals LLC.

Zusammenfassung: Hintergrund: Psychische Faktoren sind mit der Entstehung und Aufrechterhaltung der Schmerzempfindung assoziiert. Das Ziel der vorliegenden Pilotstudie war es, bei Patienten mit chronischen Kiefer- und Gesichtsbeschwerden psychische Faktoren der Schmerzempfindung zu erfassen und den Einfluss von Psychoedukation und physiotherapeutischen Maßnahmen auf die Schmerzempfindung und die funktionale Kieferöffnung über 6Monate zu überprüfen. Material und Methoden: Zu 3Messzeitpunkten wurden 40Patienten (31Frauen, 9Männer, durchschnittliches Alter 38,6Jahre) nach den Richtlinien der Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD) untersucht. Die Patienten füllten zu Beginn (T1), nach 3Monaten (T2) und nach 6Monaten (T3) mehrere Fragebogen zu Schmerzempfinden und Befindlichkeit aus. Die Patienten erhielten zu jedem Messzeitpunkt eine Aufklärung zur psychologischen Schmerzverarbeitung. Ergebnisse: Nach 6Monaten zeigte sich eine signifikante Verbesserung der Schmerzstärke und -chronifizierung, der Kieferöffnung und der Lebensqualität. Ebenfalls zeigte sich eine Verringerung der Angst- und Depressionssymptome. Die Verbesserungen waren vom Grad der Schmerzchronifizierung abhängig. Schlussfolgerung: Patienten mit einem schweren Chronifizierungsgrad sollten in der Primärdiagnostik erfasst und zusätzlich psychotherapeutisch begleitet werden.

Recent advancements in medical imaging, virtual surgical planning (VSP), and three-dimensional (3D) printing have potentially changed how today’s craniomaxillofacial surgeons use patient information for customized treatments. Over the years, polyetheretherketone (PEEK) has emerged as the biomaterial of choice to reconstruct craniofacial defects. With advancements in additive manufacturing (AM) systems, prospects for the point-of-care (POC) 3D printing of PEEK patient-specific implants (PSIs) have emerged. Consequently, investigating the clinical reliability of POC-manufactured PEEK implants has become a necessary endeavor. Therefore, this paper aims to provide a quantitative assessment of POC-manufactured, 3D-printed PEEK PSIs for cranial reconstruction through characterization of the geometrical, morphological, and biomechanical aspects of the in-hospital 3D-printed PEEK cranial implants. The study results revealed that the printed customized cranial implants had high dimensional accuracy and repeatability, displaying clinically acceptable morphologic similarity concerning fit and contours continuity. From a biomechanical standpoint, it was noticed that the tested implants had variable peak load values with discrete fracture patterns and failed at a mean (SD) peak load of 798.38 ± 211.45 N. In conclusion, the results of this preclinical study are in line with cranial implant expectations, however, specific attributes have scope for further improvements.

Pure orbital blowout fractures occur within the confines of the internal orbital wall. Restoration of orbital form and volume is paramount to prevent functional and esthetic impairment. The anatomical peculiarity of the orbit has encouraged surgeons to develop implants with customized features to restore its architecture. This has resulted in worldwide clinical demand for patient-specific implants (PSIs) designed to fit precisely in the patient’s unique anatomy. Material extrusion or Fused filament fabrication (FFF) three-dimensional (3D) printing technology has enabled the fabrication of implant-grade polymers such as Polyetheretherketone (PEEK), paving the way for a more sophisticated generation of biomaterials. This study evaluates the FFF 3D printed PEEK orbital mesh customized implants with a metric considering the relevant design, biomechanical, and morphological parameters. The performance of the implants is studied as a function of varying thicknesses and porous design constructs through a finite element (FE) based computational model and a decision matrix based statistical approach. The maximum stress values achieved in our results predict the high durability of the implants, and the maximum deformation values were under one-tenth of a millimeter (mm) domain in all the implant profile configurations. The circular patterned implant (0.9 mm) had the best performance score. The study demonstrates that compounding multi-design computational analysis with 3D printing can be beneficial for the optimal restoration of the orbital floor.

Purpose Several post-processing algorithms for 3D visualization of the skull in craniosynostosis with their specific advantages and disadvantages have been already described. The Finite Element Method (FEM) described herein can also be used to evaluate the efficacy of the cutting patterns with respect to an increase in the projected surface area under assumed uniform loading of the manipulated and cut bone segments. Methods The FEM analysis was performed. Starting with the classic cranial osteotomies for bifrontal craniotomy and orbital bandeau a virtually mirroring of the unaffected triangular shaped frontal bone was performed to achieve a cup-shaped sphere of constant thickness of 2.5 mm with a radius of 65 mm. Mechanical properties required for the analysis were Young's modulus of 340 MPa and Poisson's ratio of 0.22. Four different cutting patterns from straight to curved geometries have been projected onto the inner surface of the sphere with a cutting depth set to 2/3rds of the shell thickness. The necessary force for the deformation, the resulting tensions and the volume loss due to the osteotomy pattern were measured. Results Better outcomes were realized with pattern D. The necessary force was 73.6% smaller than the control group with 66N. Best stress distribution was achieved. Curved cutting patterns led to the highest peak of stress and thus to a higher risk of fracture. Straight bone cuts parallel to the corners or to the thighs of the sphere provided a better distribution of stresses with a small area with high stress. Additionally, also with pattern D a surface increase of 20.7% higher than reference was registered. Conclusion As a proof of concept for different cutting geometries for skull molding in the correction of craniosynostosis, this computational model shows that depending of the cutting pattern different biomechanical behavior is achieved.

The aim was to analyze safety data associated with the maternal use of antiepileptic drugs in pregnancy and to assess the risk of cleft lip and/or palate (CL/P) as an outcome in the neonate. A parallel objective was to assess the completeness of the safety information concerning pregnancy exposures in the Summary of Product Characteristics (SmPCs) and the Patient Information (PI) in the USA and the UK.We analyzed individual case safety reports of CL/P associated with antiepileptic drugs in the FDA Adverse Event Reporting System. For the antiepileptic drugs with signals (EB05 ≥ 2), we reviewed Drug Analysis Prints for CL/P cases in the UK Medicines and Healthcare products Regulatory Agency (MHRA). We performed descriptive analyses of relevant SmPCs and PIs in the UK and the USA using a checklist of recommendations collected from the literature.In total 817 CL/P reports were identified for 12 antiepileptic drugs in the FDA Adverse Event Reporting System. Ten of the 12 antiepileptic drugs were associated with 156 CL/P cases in the MHRA Sentinel. Safety information concerning pregnancy was found to be more comprehensive in UK SmPCs than in the US equivalents.There is statistical disproportionality in individual case safety reports indicative of an increased risk of CL/P with 12 antiepileptic drugs studied. More studies are required to explore the association between in utero exposure to antiepileptic drugs and the risk of CL/P. There are inconsistencies between the UK and US safety labels. CL/P associated with antiepileptic drugs is an important topic and requires providing inclusive, unbiased, up-to-date information to prescribers and women of childbearing age.

Background: In order to overcome the geometrical and physical limitations of conventional rotating and piezosurgery instruments used to perform bone osteotomies, as well as the difficulties in translating digital planning to the operating room, a stand-alone robot-guided laser system has been developed by Advanced Osteotomy Tools, a Swiss start-up company. We present our experiences of the first-in-man use of the Cold Ablation Robot-guided Laser Osteotome (CARLO&reg, ). Methods: The CARLO&reg, device employs a stand-alone 2.94-&micro, m erbium-doped yttrium aluminum garnet (Er:YAG) laser mounted on a robotic arm. A 19-year-old patient provided informed consent to undergo bimaxillary orthognathic surgery. A linear Le Fort I midface osteotomy was digitally planned and transferred to the CARLO&reg, device. The linear part of the Le Fort I osteotomy was performed autonomously by the CARLO&reg, device under direct visual control. All pre-, intra-, and postoperative technical difficulties and safety issues were documented. Accuracy was analyzed by superimposing pre- and postoperative computed tomography images. Results: The CARLO&reg, device performed the linear osteotomy without any technical or safety issues. There was a maximum difference of 0.8 mm between the planned and performed osteotomies, with a root-mean-square error of 1.0 mm. The patient showed normal postoperative healing with no complications. Conclusion: The newly developed stand-alone CARLO&reg, device could be a useful alternative to conventional burs, drills, and piezosurgery instruments for performing osteotomies. However, the technical workflow concerning the positioning and fixation of the target marker and the implementation of active depth control still need to be improved. Further research to assess safety and accuracy is also necessary, especially at osteotomy sites where direct visual control is not possible. Finally, cost-effectiveness analysis comparing the use of the CARLO&reg, device with gold-standard surgery protocols will help to define the role of the CARLO&reg, device in the surgical landscape.

Background: In order to overcome the geometrical and physical limitations of conventional rotating and piezosurgery instruments used to perform bone osteotomies, as well as the difficulties in translating digital planning to the operating room, a stand-alone robot-guided laser system has been developed by Advanced Osteotomy Tools, a Swiss start-up company. We present our experiences of the first-in-man use of the Cold Ablation Robot-guided Laser Osteotome (CARLO®). Methods: The CARLO® device employs a stand-alone 2.94-µm erbium-doped yttrium aluminum garnet (Er:YAG) laser mounted on a robotic arm. A 19-year-old patient provided informed consent to undergo bimaxillary orthognathic surgery. A linear Le Fort I midface osteotomy was digitally planned and transferred to the CARLO® device. The linear part of the Le Fort I osteotomy was performed autonomously by the CARLO® device under direct visual control. All pre-, intra-, and postoperative technical difficulties and safety issues were documented. Accuracy was analyzed by superimposing pre- and postoperative computed tomography images. Results: The CARLO® device performed the linear osteotomy without any technical or safety issues. There was a maximum difference of 0.8 mm between the planned and performed osteotomies, with a root-mean-square error of 1.0 mm. The patient showed normal postoperative healing with no complications. Conclusion: The newly developed stand-alone CARLO® device could be a useful alternative to conventional burs, drills, and piezosurgery instruments for performing osteotomies. However, the technical workflow concerning the positioning and fixation of the target marker and the implementation of active depth control still need to be improved. Further research to assess safety and accuracy is also necessary, especially at osteotomy sites where direct visual control is not possible. Finally, cost-effectiveness analysis comparing the use of the CARLO® device with gold-standard surgery protocols will help to define the role of the CARLO® device in the surgical landscape.

Dental anomalies coincide with genetic disorders, and prenatal identification may contribute to a more accurate diagnosis. The aim of this study was to assess whether fetal Magnet Resonance Imaging (MRI) is suitable to visualize and investigate intrauterine dental development in the upper jaw, and to compare the quality of visibility of tooth buds between 1.5 Tesla (T) and 3T images. MR images of fetuses Gestational Week (GW) 26.71 &plusmn, 4.97 from 286 pregnant women with diagnoses unrelated to dental anomalies were assessed by three raters. We compared the visibility between groups and field strengths in five gestational age groups, using chi square and Fisher&rsquo, s exact tests. All ten primary tooth buds were identifiable in 5.4% at GW 18&ndash, 21, in 75.5% at GW 26&ndash, 29, and in 90.6% at GW 34+. Before GW 30, more tooth buds were identifiable on 3T images than on 1.5T images. Statistical significance was only reached for identification of incisors (p = 0.047). Therefore, 1.5T and 3T images are viable to visualize tooth buds, particularly after GW 25, and their analysis may serve as diagnostic criterion. MRI tooth bud data might have an impact on various fields of research, such as the maldevelopment of teeth and their causes. Analyzing tooth buds as an additional diagnostic criterion is not time consuming, and could lead to an improvement of syndrome diagnosis.

With the rapid progression of additive manufacturing and the emergence of new 3D printing technologies, accuracy assessment is mostly being performed on isosymmetric test bodies. However, the accuracy of anatomic models can vary. The dimensional accuracy of root mean square values in terms of trueness and precision of 50 mandible replicas, printed with five common printing technologies, were evaluated. The highest trueness was found for the selective laser sintering printer (0.11 &plusmn, 0.016 mm), followed by a binder jetting printer (0.14 &plusmn, 0.02 mm), and a fused filament fabrication printer (0.16 &plusmn, 0.009 mm). However, highest precision was identified for the fused filament fabrication printer (0.05 &plusmn, 0.005 mm) whereas other printers had marginally lower values. Despite the statistically significance (p &lt, 0.001), these differences can be considered clinically insignificant. These findings demonstrate that all 3D printing technologies create models with satisfactory dimensional accuracy for surgical use. Since satisfactory results in terms of accuracy can be reached with most technologies, the choice should be more strongly based on the printing materials, the intended use, and the overall budget. The simplest printing technology (fused filament fabrication) always scored high and thus is a reliable choice for most purposes.

Background Multiple sclerosis (MS) is a chronic neurological disease occurring mostly in women of childbearing age. Pregnant women with MS are usually excluded from clinical trials; as users of the internet, however, they are actively engaged in threads and forums on social media. Social media provides the potential to explore real-world patient experiences and concerns about the use of medicinal products during pregnancy and breastfeeding. Objective This study aimed to analyze the content of posts concerning pregnancy and use of medicines in online forums; thus, the study aimed to gain a thorough understanding of patients’ experiences with MS medication. Methods Using the names of medicinal products as search terms, we collected posts from 21 publicly available pregnancy forums, which were accessed between March 2015 and March 2018. After the identification of relevant posts, we analyzed the content of each post using a content analysis technique and categorized the main topics that users discussed most frequently. Results We identified 6 main topics in 70 social media posts. These topics were as follows: (1) expressing personal experiences with MS medication use during the reproductive period (55/70, 80%), (2) seeking and sharing advice about the use of medicines (52/70, 74%), (3) progression of MS during and after pregnancy (35/70, 50%), (4) discussing concerns about MS medications during the reproductive period (35/70, 50%), (5) querying the possibility of breastfeeding while taking MS medications (30/70, 42%), and (6) commenting on communications with physicians (26/70, 37%). Conclusions Overall, many pregnant women or women considering pregnancy shared profound uncertainties and specific concerns about taking medicines during the reproductive period. There is a significant need to provide advice and guidance to MS patients concerning the use of medicines in pregnancy and postpartum as well as during breastfeeding. Advice must be tailored to the circumstances of each patient and, of course, to the individual medicine. Information must be provided by a trusted source with relevant expertise and made publicly available.

In the bioarchaeological analysis of burials from a medieval graveyard at Hettstedt, Central Germany, a male skeleton of about 40 to 50 years at death with an unusual bony structure in the left maxillary sinus was discovered. Macroscopic examination exhibited a balloon-shaped osseous lesion with solid cortical surface 2.5 × 1.5 cm in size. Micro-CT scans revealed trabecular structures around a central cavity. The margins of the osseous lesion were well defined without infiltration of normal maxillary bone tissue. The histopathological analysis showed the presence of lamellar and woven bone. The structure and localisation of the tumour-like lesion suggest that the formation was the result of chronic inflammation and that chronic dental sinusitis seems to have triggered a large reactive ossification.

Objective Aim of the study was to prove the safety, accuracy characteristics of contact-free laser osteotomy executed with the cold ablation and robot-guided Er:YAG laser osteotome in a human cadaver test. Material and methods On six human cadavers mandible resections with a swallowtail like pattern were performed with the laser system on each side. The defects were reconstructed with a fibula graft of identical design and enlarged by 0.2 units. Mandibles and fibulas width as well surgery times were recorded. Additionally a Le Fort I and median mandible split were done. Macroscopically, the bone margins were examined for necrosis. Results Laser osteotomies of the mandible up to a depth of 23 mm were possible without any thermal damage. Repeatability and precision of the system could be easily assessed. With the navigation system precise control of localization was achievable. Mean surgery time for the mandible resection was 13.32 min and for the fibula osteotomy 12.38 min. Conclusion The simply transmission of a cold ablation and robot-guided laser osteotome in an operation room identical environment for surgical interventions could be demonstrated. Precise osteotomy patterns with freedom in the design and carbonisation-free cut surfaces have been shown.

Introduction Microvascular surgery following tumor resection has become an important field of oral and maxillofacial surgery (OMFS). Following the results from management of T1/T2 floor-of-mouth and tongue squamous cell carcinoma (SCC) in German-speaking countries, Europe, and worldwide, this paper presents specific concepts for the management of resection and reconstruction of T3/T4 SCC of the maxillary and mandibular alveolar process and tongue. Methods The DOSAK questionnaire was distributed in three different phases to a growing number of maxillofacial units worldwide. Within this survey, clinical patient settings were presented to participants and center-specific treatment strategies were evaluated. Results A total of 188 OMFS units from 36 different countries documented their treatment strategies for T3/T4 maxillary and mandibular alveolar process and tongue SCC. The extent of surgical resections and subsequent reconstructions is more consistent than with T1/T2 tumors, although the controversy surrounding continuity resections and mandible-sparing procedures remains. For continuity resection of the mandible the fibula free flap is the most frequently used bone replacement, whereas maxilla reconstruction concepts are less consistent, ranging from locoregional coverage concepts and different microvascular reconstruction options to treatment via obturator prosthesis. Conclusion Results from treatment strategies for T3/T4 tumors underline the limited evidence for the appropriate amount of resection and subsequent reconstruction process, especially in cases involving the mandible. Prospective randomized trials will be necessary in the long term to establish valid treatment guidelines.

Bruxism and myoarthrophathy lead to a complex set of burdens that can involve both medical and psychological aspects. Muscular tension due to stress affects these burdens and leads to chronic pain. Using a stress model, it was explained how the individual processing of stress leads to varying negative effects on oral health and jaw function. Through a short survey, it is possible for the dentist to assess the extent of the chronic pain and the associated psychosocial burdens, and, when necessary, encourage the patient to undertake psychological guidance. By learning relaxation techniques and pain coping mechanisms, the pain can be reduced. In order to achieve a long lasting successful treatment, one must consider both medical and psychosomatic aspects.

Direct conversion from fibroblasts to generate hepatocyte like-cells (iHeps) bypassing the pluripotent state has been described in previous reports as an attractive method acquiring hepatocytes for cell-based therapy. The limited proliferation of iHeps, however, has hampered it uses in cell-based therapy. Since hepatic stem cells (HepSCs) possess self-renewal and bipotency with the capacity to differentiate into both hepatocytes and cholangiocytes, they have therapeutic potential for treating liver disease. Here, we investigated the therapeutic effects of induced HepSCs (iHepSCs) on a carbon tetrachloride (CCl4)-induced liver fibrosis model. We demonstrate that Oct4 and Hnf4a are sufficient to convert fibroblasts into expandable iHepSCs. Hepatocyte-like cells derived from iHepSCs (iHepSC-HEPs) exhibit the typical morphology of hepatocytes and hepatic functions, including glycogen storage, low-density lipoprotein (LDL) uptake, Indocyanine green (ICG) detoxification, drug metabolism, urea production, and albumin secretion. iHepSCs-derived cholangiocyte-like cells (iHepSC-CLCs) expressed cholangiocyte-specific markers and formed cysts and tubule-like structures with apical-basal polarity and secretory function in three-dimensional culture condition. Furthermore, iHepSCs showed anti-inflammatory and anti-fibrotic effects in CCl4-induced liver fibrosis. This study demonstrates that Oct4 and Hnf4α-induced HepSCs show typical hepatic and biliary functionality in vitro. It also presents the therapeutic effect of iHepSCs in liver fibrosis. Therefore, directly converting iHepSCs from somatic cells may facilitate the development of patient-specific cell-based therapy for chronic liver damage.

Precise, expensive individual saw guides are used with increasing frequency for the reconstruction of mandibular defects with fibular grafts. In this report, an alternative is presented - the Multiuse Cutting Jig (MUC-Jig, proprietary development). It is reusable, suitable for all patients, requires simple planning based on conventional CT imaging, and is more economical.To investigate its precision, we conducted a nonblinded experimental study, with ten participating craniomaxillofacial surgeons. Osteotomies of four different fibula segments were carried out at the same angulation, with groups defined according to the proximal and distal fixed angulation: 45°, 30°, 15°, or 0°. The sagittal cut was performed proximally, with the coronal cut performed distally. The resulting 40 segments (n = 40) were analyzed with their Tx length (primary endpoint) and osteotomy angles, and compared to the original planning.The mean (SD) relative deviation of all grafts from the original planning was -0.08 mm (1.12) in length and -0.71° (3.15) for the angle. Only 45° (-2.04 ± 3.71°) and 30° (-1.07 ± 2.52°) cuts differed significantly (p0.05) from smaller angle grafts. The mean (SD) absolute deviation was 0.81 mm (0.27) in length and 2.13° (0.93) in graft angles. For individual transplants, 45° cuts (1.28 ± 1.03 mm) differed significantly (p0.005) from others. We observed no differences in relative length or absolute angle deviation.The MUC-Jig is precise and cost-effective for osteotomies with medium angles and smooth reconstructions of template-guided procedures.

Osteoradionecrosis (ORN) is a serious side effect of oncologic radiation therapy. Often, surgical removal of the affected skeletal tissue is indicated. In cranio-maxillofacial surgery, partial or total resection of the upper or lower jaw implies a severe impairment of the patient‘s quality of life. Up to now, clear display of ORN is still a challenge. This part of the project is dedicated to medical visualization of progressing ORN for clinical diagnosis. Currently, clinical diagnosis of ORN is mostly based on computer tomography (CT). With regard to its high advantages as e.g. reduced radiation dose, we additionally evaluate cone beam computer tomography (CBCT). After registration on a suitable reference and refined image processing and segmentation, all patient’s CT-/CBCT-data are subjected to various rendering techniques configured for the respective purpose, namely visualization of destructive and/or sclerotic skeletal alterations, consideration of cortical or trabecular bone, and analysis based on CT or CBCT. Recent achievements within the project were demonstrated with special focus on evaluation of both, CT and CBCT as well as on close cooperation with the clinical setting.

Hintergrund Kraniomandibulare Dysfunktionen (CMD) betreffen einen erheblichen Teil der Bevolkerung. In den letzten Jahrzehnten haben computerassistierte Methoden fur die Diagnostik und Therapieplanung zunehmend Eingang in die klinische Praxis gefunden.

BACKGROUND Multiple sclerosis (MS) is a chronic neurological disease occurring mostly in women of childbearing age. Pregnant women with MS are usually excluded from clinical trials; as users of the internet, however, they are actively engaged in threads and forums on social media. Social media provides the potential to explore real-world patient experiences and concerns about the use of medicinal products during pregnancy and breastfeeding. OBJECTIVE This study aimed to analyze the content of posts concerning pregnancy and use of medicines in online forums; thus, the study aimed to gain a thorough understanding of patients’ experiences with MS medication. METHODS Using the names of medicinal products as search terms, we collected posts from 21 publicly available pregnancy forums, which were accessed between March 2015 and March 2018. After the identification of relevant posts, we analyzed the content of each post using a content analysis technique and categorized the main topics that users discussed most frequently. RESULTS We identified 6 main topics in 70 social media posts. These topics were as follows: (1) expressing personal experiences with MS medication use during the reproductive period (55/70, 80%), (2) seeking and sharing advice about the use of medicines (52/70, 74%), (3) progression of MS during and after pregnancy (35/70, 50%), (4) discussing concerns about MS medications during the reproductive period (35/70, 50%), (5) querying the possibility of breastfeeding while taking MS medications (30/70, 42%), and (6) commenting on communications with physicians (26/70, 37%). CONCLUSIONS Overall, many pregnant women or women considering pregnancy shared profound uncertainties and specific concerns about taking medicines during the reproductive period. There is a significant need to provide advice and guidance to MS patients concerning the use of medicines in pregnancy and postpartum as well as during breastfeeding. Advice must be tailored to the circumstances of each patient and, of course, to the individual medicine. Information must be provided by a trusted source with relevant expertise and made publicly available.

In 3D mapping of flexible surfaces (e.g. human faces) measurement errors due to movement or positioning occur. Aggravated by equipment- or researcher-caused mistakes considerable deviations can result. Therefore first the appliances' precision handling and reliability in clinical environment must be established. Aim of this study was to investigate accuracy and precision of two contact-free 3D measurement systems (white light vs. laser). Standard specimens of known diameter for sphere deviation, touch deviation and plane deviation were tested. Both systems are appropriate for medical application acquiring solid data (

Introduction The aim of this study was to evaluate whether inexpensive 3D models can be suitable to train surgical skills to dental students or oral and maxillofacial surgery residents. Furthermore, we wanted to know which of the most common filament materials, acrylonitrile butadiene styrene (ABS) or polylactic acid (PLA), can better simulate human bone according to surgeons' subjective perceptions. Materials and methods Upper and lower jaw models were produced with common 3D desktop printers, ABS and PLA filament and silicon rubber for soft tissue simulation. Those models were given to 10 blinded, experienced maxillofacial surgeons to perform sinus lift and wisdom teeth extraction. Evaluation was made using a questionnaire. Results Because of slightly different density and filament prices, each silicon-covered model costs between 1.40-1.60 USD (ABS) and 1.80-2.00 USD (PLA) based on 2017 material costs. Ten experienced raters took part in the study. All raters deemed the models suitable for surgical education. No significant differences between ABS and PLA were found, with both having distinct advantages. Conclusion The study demonstrated that 3D printing with inexpensive printing filaments is a promising method for training oral and maxillofacial surgery residents or dental students in selected surgical procedures. With a simple and cost-efficient manufacturing process, models of actual patient cases can be produced on a small scale, simulating many kinds of surgical procedures.

Purpose The purpose of this study was to provide a quantitative accuracy assessment of soft tissue predictions generated by a computer-aided maxillofacial planning system in patients undergoing orthognathic surgery following the “surgery-first” treatment. Materials and methods For this study, we looked at 16 patients with open bite dentofacial-dysmorphosis who underwent orthognathic surgery. Surgeries were planned using conventional sketches and the newly developed computer-assisted SOTIRIOS planning software (developed by the authors). Validation procedures were performed in the following steps: (1) Standardized registration of the pre- and postoperative CT volumes; (2) Automated adjustment of the bone-related preoperative planning to the actual postoperative bony displacement; (3) Simulation of soft tissue changes according to the definitive bony movements; and (4) Calculation of soft tissue differences between the predicted and the actual 6-month postoperative results by distance mapping. Results The program produced a clinically satisfactory 3D soft tissue prediction, with a mean error of 1.46 mm ± 1.53 mm. The program was suitable for use in virtual surgical planning without technical assistance. Conclusion This study shows that the program is quite accurate, enabling the surgeon to predict the outcome of the soft tissue. This has the potential to promote the routine application of the surgery-first approach in patients suffering from open bite.

Laser was being used in medicine soon after its invention. However, it has been possible to excise hard tissue with lasers only recently, and the Er:YAG laser is now established in the treatment of damaged teeth. Recently experimental studies have investigated its use in bone surgery, where its major advantages are freedom of cutting geometry and precision. However, these advantages become apparent only when the system is used with robotic guidance. The main challenge is ergonomic integration of the laser and the robot, otherwise the surgeon's space in the operating theatre is obstructed during the procedure. Here we present our first experiences with an integrated, miniaturised laser system guided by a surgical robot. An Er:YAG laser source and the corresponding optical system were integrated into a composite casing that was mounted on a surgical robotic arm. The robot-guided laser system was connected to a computer-assisted preoperative planning and intraoperative navigation system, and the laser osteotome was used in an operating theatre to create defects of different shapes in the mandibles of 6 minipigs. Similar defects were created on the opposite side with a piezoelectric (PZE) osteotome and a conventional drill guided by a surgeon. The performance was analysed from the points of view of the workflow, ergonomics, ease of use, and safety features. The integrated robot-guided laser osteotome can be ergonomically used in the operating theatre. The computer-assisted and robot-guided laser osteotome is likely to be suitable for clinical use for ostectomies that require considerable accuracy and individual shape.

Despite of the long history of medical application, laser ablation of bone tissue became successful only recently. Laser bone cutting is proven to have higher accuracy and to increase bone healing compared to conventional mechanical bone cutting. But the reason of subsequent better healing is not biologically explained yet. In this study we present our experience with an integrated miniaturized laser system mounted on a surgical lightweight robotic arm.; An Erbium-doped Yttrium Aluminium Garnet (Er:YAG) laser and a piezoelectric (PZE) osteotome were used for comparison. In six grown up female Gottingen minipigs, comparative surgical interventions were done on the edentulous mandibular ridge. Our laser system was used to create different shapes of bone defects on the left side of the mandible. On the contralateral side, similar bone defects were created by PZE osteotome. Small bone samples were harvested to compare the immediate post-operative cut surface.; The analysis of the cut surface of the laser osteotomy and conventional mechanical osteotomy revealed an essential difference. The scanning electron microscopy (SEM) analysis showed biologically open cut surfaces from the laser osteotomy. The samples from PZE osteotomy showed a flattened tissue structure over the cut surface, resembling the "smear layer" from tooth preparation.; We concluded that our new finding with the mechanical osteotomy suggests a biological explanation to the expected difference in subsequent bone healing. Our hypothesis is that the difference of surface characteristic yields to different bleeding pattern and subsequently results in different bone healing. The analyses of bone healing will support our hypothesis.

Ethik in der dentomaxillofazialen Radiologie ist sowohl fur den Kliniker als auch fur den niedergelassenen Mund-, Kiefer- und Gesichtschirurgen im Alltag relevant und sollte bewusst wahrgenommen werden. Daher werden in diesem Beitrag folgende ethische Fragestellungen in Bezug auf die dentomaxillofaziale Bildgebung diskutiert

Aim of the study was to prove the safety, accuracy characteristics of contact-free laser osteotomy executed with the cold ablation and robot-guided Er:YAG laser osteotome in a human cadaver test.On six human cadavers mandible resections with a swallowtail like pattern were performed with the laser system on each side. The defects were reconstructed with a fibula graft of identical design and enlarged by 0.2 units. Mandibles and fibulas width as well surgery times were recorded. Additionally a Le Fort I and median mandible split were done. Macroscopically, the bone margins were examined for necrosis.Laser osteotomies of the mandible up to a depth of 23 mm were possible without any thermal damage. Repeatability and precision of the system could be easily assessed. With the navigation system precise control of localization was achievable. Mean surgery time for the mandible resection was 13.32 min and for the fibula osteotomy 12.38 min.The simply transmission of a cold ablation and robot-guided laser osteotome in an operation room identical environment for surgical interventions could be demonstrated. Precise osteotomy patterns with freedom in the design and carbonisation-free cut surfaces have been shown.

Introduction Microvascular surgery following tumor resection has become an important field of oral maxillofacial surgery (OMFS). Following the results on general aspects of current reconstructive practice in German-speaking countries, Europe and worldwide, this paper presents specific concepts for the management of resection and reconstruction of T1/T2 squamous cell carcinoma (SCC) of the anterior floor of the mouth and tongue. Methods The DOESAK questionnaire was distributed in three different phases to a growing number of maxillofacial units worldwide. Within this survey, clinical patient settings were presented to participants and center-specific treatment strategies were evaluated. Results A total of 188 OMFS units from 36 different countries documented their treatment strategies for T1/T2 anterior floor of the mouth squamous cell carcinoma and tongue carcinoma. For floor of mouth carcinoma close to the mandible, a wide variety of concepts are presented: subperiosteal removal of the tumor versus continuity resection of the mandible and reconstruction ranging from locoregional closure to microvascular bony reconstruction. For T2 tongue carcinoma, concepts are more uniform. Conclusion These results demonstrate the lack of evidence and the controversy of different guidelines for the extent of safety margins and underline the crucial need of global prospective randomized trials on this topic to finally obtain evidence for a common guideline based on a strong community of OMFS units.