Search

This study reports the solar light-driven activation of a bicyclic aminoxyl mediator to achieve C–C bond cleavage of a lignin model compound at room temperature using a donor–π-conjugated bridge–acceptor organic dye-based photoelectrochemical system.

The selective cleavage of C-C/C-O linkages represents a key step toward achieving the chemical conversion of biomass to targeted value-added chemical products under ambient conditions. Using photoelectrosynthetic solar cells is a promising method to address the energy intensive depolymerization of lignin for the production of biofuels and valuable chemicals. This feature article gives an in-depth overview of recent progress using dye-sensitized photoelectrosynthetic solar cells (DSPECs) to initiate the cleavage of C-C/C-O bonds in lignin and related model compounds. This approach takes advantage of

Biochar derived from lignocellulosic biomass has been used as a low-cost adsorbent in wastewater treatment applications. Due to its rich porous structure and good electrical conductivity, biochar can be used as a cost-effective electrode material for capacitive deionization of water. In this work, willow biochar was prepared through carbonization of shrub willow chips, activated with potassium hydroxide, and loaded with manganese dioxide (WBC-K-MnO2 nanocomposite). The prepared materials were used to electrochemically adsorb Pb2+ from aqueous solutions. Under the applied potential of 1.0 V, the WBC-K-MnO2 electrode exhibited a high Pb2+ specific electrosorption capacity (23.3 mg/g) as compared to raw willow biochar (4.0 mg/g) and activated willow biochar (9.2 mg/g). KOH activation followed by MnO2 loading on the surface of raw biochar enhanced its BET surface area (178.7 m2/g) and mesoporous volume ratio (42.1%). Moreover, the WBC-K-MnO2 nanocomposite exhibited the highest specific capacitance value of 234.3 F/g at a scan rate of 5 mV/s. The electrosorption isotherms and kinetic data were well explained by the Freundlich and pseudo-second order models, respectively. The WBC-K-MnO2 electrode demonstrated excellent reusability with a Pb2+ electrosorption efficiency of 76.3% after 15 cycles. Thus, the WBC-K-MnO2 nanocomposite can serve as a promising candidate for capacitive deionization of heavy metal contaminated water.

The photoelectrochemical production of fuels, exemplified by light-driven water splitting to hydrogen and oxygen, offers a sustainable option to offset dependence on fossil fuels. A low-cost, efficient, and stable photoelectrochemical approach to solar fuels remains elusive but using similar materials and photoelectrodes for chemical production or biomass conversion offers an appealing alternative. This work reports a facile method for fabricating pristine (undoped) BiVO

This study aims to increase the specific surface area of multi-walled carbon nanotubes (MWCNTs) by forming and subsequently removing various metal oxide nanoparticles on them. We used facile methods, such as forming the particles without using a vacuum or gas and removing these particles through simple acid treatment. The shapes of the composite structures on which the metal oxide particles were formed and the formation of multi-vacancy-defect MWCNTs were confirmed via transmission electron microscopy and scanning electron microscopy. The crystallinity of the formed metal oxide particles was confirmed using X-ray diffraction analysis. Through specific surface area analysis and Raman spectroscopy, the number of defects formed and the degree and tendency of defect-formation in each metal were determined. In all the cases where the metal oxide particles were removed, the specific surface area increased, and the metal inducing the highest specific surface area was determined.

Selective cleavage of C–C bonds can be a valuable tool for various applications including polymer degradation and biomass utilization. Performing chemical transformations involving C–C bond cleavag...

All-inorganic halide perovskite nanocrystals (NCs) offer impressive optoelectronic properties for light harvesting, energy conversion, and photoredox applications, with two-dimensional (2D) perovskite NCs further increasing these prospects due to their improved photoluminescence (PL) tuneability, impressive color purity, high in-plane charge transport, and large lateral dimensions which is advantageous for device integration. However, the synthesis of 2D perovskites is still challenging, especially toward large-scale applications. In this study, through the control of surface ligand composition and concentration of a mixture of short (octanoic acid and octylamine, 8-carbon chain) and long (oleic acid and oleylamine, 18-carbon chain) ligands, we have developed an extremely facile ligand-mediated synthesis of 2D CsPbX3 (X = Cl, Br, or mixture thereof) nanoplatelets (NPLs) at room temperature in an open vessel. In addition, the developed method is highly versatile and can be applied to synthesize Mn-doped CsPbX3 NPLs, showing a systematic increase in the total PL quantum yield (QY) and the Mn-dopant emission around 600 nm with increasing Mn and Cl concentrations. The reaction occurs in toluene by the introduction of CsX, PbX2, and MnX2 precursors under ambient conditions, which requires no harsh acids, avoids excessive lead waste, little thermal energy input, and is potentially scalable toward industrial applications.

Deep eutectic solvents (DESs) are effective solvents for biomass conversion and have been proposed as alternatives to ionic liquids (ILs). Herein, we first report an effective pretreatment of woody...

Transition-metal ions doped nanocrystals (NCs), specifically Mn-doped NCs, hold great potential in the field of photocatalysis, especially, to improve photocatalytic performance for singlet oxygen (1O2) generation. Here, we report the design of a novel Mn-doped NC-based nanocomposites, specifically, silica-coated Mn-doped CdS/ZnS NCs decorated with Pt NCs (denoted as Mn-NCs@SiO2-Pt), which enhance photocatalytic 1O2 generation. Owing to the long-lived Mn excited state (on the order of ms), the energy-transfer between Mn-NCs and molecular oxygen is facilitated with the assistance of the Pt NCs adhered to the Mn-NC@SiO2 surface. Therefore, the Mn-NCs@SiO2-Pt composites, integrate the advantages of Mn-doped NCs, a protective silica layer, and Pt NCs to exhibit excellent catalytic activity and selectivity for the selective oxidation of primary benzylic alcohols to aldehydes through an 1O2 engaged oxidation process under visible-light irradiation. This work paves the way for enhancing catalytic performance via facilitated energy transfer relaxation by utilizing the long-lived excited-state of Mn2+ dopant ions in nanocomposites.

As a green synthetic approach, visible light-driven photosynthesis is highly desirable in arylation of inert alkyl halides, as they are important precursors in the total synthesis of natural products and pharmaceuticals. However, the high bond dissociation energy of aryl halides is typically out of the range of a single visible-light photon. Here, we propose an essential initiation and subsequent electron-transfer step process for visible light-driven aryl halide reduction, and identify the key pyrrole radical anion intermediate, that acts as the strong reduction species. We propose a photoinduced disproportionation (PDP) approach without the addition of any photocatalysts or additives to afford radical anions of pyrrole derivatives, which have enough reduction power to transfer an electron to aryl halide, giving rise to the corresponding aryl radical to afford the desired C–H arylated heterocyclic product. Once generated, the heterocyclic product can undergo the same photoinduced disproportionation (PDP) process to activate aryl halides, thereby promoting the reaction rate. This unprecedented initiation step, which was carried out in the absence of photocatalysts and additives under ambient conditions, can also be used for coupling a wide range of (hetero)aryl halides and pyrrole derivatives, as well as the synthesis of drug intermediates and biorelevant compounds.

The seed-mediated method is a general procedure for the synthesis of gold nanorods (Au NRs), and reducing agents such as ascorbic acid (AA) and hydroquinone (HQ) are widely used for the growth process. Further, they are mild reducing agents; however, when AA is used, controlling the size of Au NRs with a higher aspect ratio (localized surface plasmon resonance (LSPR) peak, λLmax > 900 nm) is challenging because it results in a faster growth rate of Au NRs. In contrast, when HQ is used, Au NRs with a higher aspect ratio can be synthesized as it slows down the growth rate of the Au NRs and greatly enhanced the λLmax. However, the increase in λLmax is still needs not satisfactory due to the limited enhancement in the aspect ratio of Au NRs due to utilization of single reducing agent. The growth kinetics of the Au NRs can be modulated by controlling the reducing power of the reducing agents. In such scenario, judicious use of two reducing agents such as AA and HQ simultaneously can help us to design Au NRs of higher aspect ratio in a controlled manner due to the optimum growth rate resulting from the combined effect of both the reducing agents. In this study, we investigated the effect of the two reducing agents by controlling the volume ratios. When the growth solution contains both the reducing agents, the growth of Au NRs is first initiated by the fast reduction of Au3+ to Au+ due to stronger reducing power of the AA and when the AA in the growth solution is completely utilized, further growth of the Au NRs continues as a result of the HQ thereby resulting to high aspect ratio Au NRs. Consequently, the LSPR peak (λLmax > 1275 nm) can be tuned by controlling the volume ratios of the reducing agents.

For the decomposition process of lignin, there have been several processes reported. However, low selectivity of oxidative cleavage is one of prime issues because of reaction under harsh condition such as high temperature and high pressure. To overcome these problems, especially, dye-sensitized photo-electrochemical cells (HAT-DSPEC), which used photocatalyst (RuC) and homogeneous catalysts incorporated system was suggested. it represents conversion efficiencies over 90% under 24 h light illumination (AM 1.5G). However, metal complex sensitizer has disadvantages like low stability, high cost and low absorption coefficient. In this study, for highly stable HAT-DSPEC process, metal based sensitizer was replaced by organic dye(5-[4-(diphenylamino)phenyl]thiophene-2-cyanoacrylic acid, L1) which has high stability and molar absorption coefficient. For regenerating dye molecules and oxidating lignin model compounds(LMCs), bicyclic nitroxyl derivates, such as 2,2,6,6-tetramethylpiperidin-1-yl)oxyl (TEMPO), and 9-azabicyclo[3,3,1]nonan-3-one-9-oxyl (Keto-ABNO) was used. In HAT-ODSPEC (organic dye-sesitized photo-electrochemical cell), Keto-ABNO exhibits higher photo-electrocatalytic activity than TEMPO for the oxidation and decomposition of LMC. The superior activity of L1 sensitizer with Keto-ABNO mediator is especially noteworthy of Caryl-Cα bond cleavage and with keto-ABNO exhibits 100% conversion yield of for 24hrs at room temperature while 86% with TEMPO. This HAT-ODSPEC process provides a unique foundation to perform selective C−C bond cleavage for real lignin conversion technologies.

Traditionally, Dye-sensitized photo electrochemical cells (DSPECs) have been targeted for solar-driven water splitting as production of fuels in aqueous media. Recently, hydrogen atom transfer incorporated dye-sensitized photo electrochemical cell (HAT-DSPEC) which used photocatalyst and homogeneous catalysts incorporating system was suggested for the decomposition process of lignin. This HAT-DSPEC system representing conversion efficiencies over 90% resulted in the formation of the oxidized ketone product from model compounds under simulated solar illumination with an applied bias 0.4 V vs Ag/Ag+ for 24 hrs. However, they have several issues such as long reaction time, low stability, and high bias potential. To overcome these problems, in this study, dye-sensitized photovoltaics’ advanced technic is applied. In HAT-DSPEC system, photo-anode (TiO2@Dye) has important role to produce oxoammonium species by oxidizing nitroxyl derivatives, such as 4-acetomido TEMPO (ACT). And these oxoammonium species act as a catalytic reaction with lignin model compounds (LMCs) to oxidizing of 1o or 2o alcohol and cleavage Caryl-Cα bond cleavage. However, in photo-anode, lots of charge recombination and electron back transfer occurs on the FTO and TiO2 surface and it induce low current and reactivity. For effectively producing oxoammonium species from photoelectrode, using blocking layer to passivate FTO surface from electrolytes and applying TiCl4 post-treatment for fast charge transport in TiO2 by enhancing interconnection of TiO2 nanoparticles. The photocurrent response of the m-TiO2@Ru470 photoelectrode in a nonaqueous electrolyte was examined with increasing mediator concentration during light on/off cycles under AM 1.5G illumination (100 mW/cm2), with an applied bias 0.1 V vs Ag/Ag+. Three kinds of electrode condition such as m-TiO2, BL/m-TiO2, BL/m-TiO2/TiCl4 post treatment was examined under same condition and treated photoelectrode (BL/m-TiO2/TiCl4) showed a significant increase in maximum photocurrent up to approximately 367.69 μA/cm2 with 3 mM ACT mediator, while BL/m-TiO2 exhibits 26.75 μA/cm2 and m-TiO2 1.26 μA/cm2. This result indicates that the blocking layer and TiCl4 post treatment enhanced electron lifetime and collection efficiency in the photoelectrode, as well as enhancing the capability of producing oxoammonium species.

Molecular-based dye-sensitized photoelectrochemical cells (DSPECs) have traditionally targeted solar-driven water splitting for the conversion of solar energy into fuels in aqueous media. Here we describe a novel approach to develop the DSPECs by combining hydrogen atom transfer mediator (HAT) with nanostructured semiconductors and photocatalysts for photocatalytic C−C/C−O bonds cleavage in lignin. This work reports the application of the DSPEC specifically designed to carry out photocatalytic oxidative cleavage of C−C/C−O σ-bonds in lignin model compounds at the photoanode. Current studies targeting the development of photocatalysts via HAT process for biomass conversion especially lignin depolymerization will be described, with the novel finding that a DSPEC utilizes a solar-driven catalytic conversion of woody biomass into value-added fuels and chemicals under aerobic mild conditions. The efficient photocatalytic bond cleavage in DSPECs is important to the development of sustainable approaches for lignin depolymerization and biomass conversion.

Integrating multidisciplinary research in plant genetic engineering and renewable deep eutectic solvents (DESs) can facilitate a sustainable and economic biorefinery. Herein, we leveraged a plant genetic engineering approach to specifically incorporate C6 C1 monomers into the lignin structure. By expressing the bacterial ubiC gene in sorghum, p-hydroxybenzoic acid (PB)-rich lignin was incorporated into the plant cell wall while this monomer was completely absent in the lignin of the wild-type (WT) biomass. A DES was synthesized with choline chloride (ChCl) and PB and applied to the pretreatment of the PB-rich mutant biomass for a sustainable biorefinery. The release of fermentable sugars was significantly enhanced (∼190 % increase) compared to untreated biomass by the DES pretreatment. In particular, the glucose released from the pretreated mutant biomass was up to 12 % higher than that from the pretreated WT biomass. Lignin was effectively removed from the biomass with the preservation of more than half of the β-Ο-4 linkages without condensed aromatic structures. Hydrogenolysis of the fractionated lignin was conducted to demonstrate the potential of phenolic compound production. In addition, a simple hydrothermal treatment could selectively extract PB from the same engineered lignin, showing a possible circular biorefinery. These results suggest that the combination of PB-based DES and engineered PB-rich biomass is a promising strategy to achieve a sustainable closed-loop biorefinery.

Traditionally, Dye-sensitized photo electrochemical cells (DSPECs) have been targeted for solar-driven water splitting as production of fuels in aqueous media. Recently, hydrogen atom transfer incorporated dye-sensitized photo electrochemical cell (HAT-DSPEC) which used photocatalyst and homogeneous catalysts incorporating system was suggested for the decomposition process of lignin. This HAT-DSPEC system representing conversion efficiencies over 90% resulted in the formation of the oxidized ketone product from model compounds under simulated solar illumination with an applied bias 0.4 V vs Ag/Ag+ for 24 hrs. However, they have several issues such as long reaction time, low stability and high bias potential. To overcome these problems, in this study, dye-sensitized photovoltaics’ advanced technic is applied. In HAT-DSPEC system, photo-anode (TiO2@Dye) has important role to produce oxoammonium species by oxidizing HAT mediator. And these oxidized HAT do a catalytic reaction with target materials: lignin model compounds (LMCs). However, in photo-anode, lots of charge recombination and electron back transfer occurs on the FTO and TiO2 surface. So, for effectively producing oxoammonium species from photoelectrode, using blocking layer to passivate FTO surface from electrolytes and applying TiCl4 post-treatment enhances charge transport in TiO2. The photocurrent response of the m-TiO2@Ru470 photoelectrode in a nonaqueous electrolyte was examined with increasing mediators concentration during light on/off cycles under AM 1.5G illumination (100 mW/cm−2), with an applied bias 0.4 V vs Ag/Ag+. Comparing three kinds of condition such as m-TiO2, BL/m-TiO2, BL/m-TiO2/TiCl4 post treatment, showed a significant increase in maximum photocurrent up to approximately 49.3, 101.3, 231.6 μA/cm−2 with 5 mM NHPI/2,6-Lutidine mediator. This result indicates that the blocking layer and TiCl4 post treatment enhanced electron life time and collection efficiency in the photoelectrode, as well as enhancing the capability of producing oxoammonium species.

Biomass has incredible potential as an alternative to fossil fuels for energy production that is sustainable for the future of humanity. Hydrogen evolution from photocatalytic biomass conversion not only produces valuable carbon-free energy in the form of molecular hydrogen but also provides an avenue of production for industrially relevant biomass products. This photocatalytic conversion can be realized with efficient, sustainable reaction materials (biomass) and inexhaustible sunlight as the only energy inputs. Reported herein is a general strategy and mechanism for photocatalytic hydrogen evolution from biomass and biomass-derived substrates (including ethanol, glycerol, formic acid, glucose, and polysaccharides). Recent advancements in the synthesis and fundamental physical/mechanistic studies of novel photocatalysts for hydrogen evolution from biomass conversion are summarized. Also summarized are recent advancements in hydrogen evolution efficiency regarding biomass and biomass-derived substrates. Special emphasis is given to methods that utilize unprocessed biomass as a substrate or synthetic photocatalyst material, as the development of such will incur greater benefits towards a sustainable route for the evolution of hydrogen and production of chemical feedstocks.

If generated from water using renewable energy, hydrogen could serve as a carbon-zero, environmentally benign fuel to meet the needs of modern society. Photoelectrochemical cells integrate the absorption and conversion of solar energy and chemical catalysis for the generation of high value products. Tandem photoelectrochemical devices have demonstrated impressive solar-to-hydrogen conversion efficiencies but have not become economically relevant due to high production cost. Dye-sensitized solar cells, those based on a monolayer of molecular dye adsorbed to a high surface area, optically transparent semiconductor electrode, offer a possible route to realizing tandem photochemical systems for H2 production by water photolysis with lower overall material and processing costs. This review addresses the design and materials important to the development of tandem dye-sensitized photoelectrochemical cells for solar H2 production and highlights current published reports detailing systems capable of spontaneous H2 formation from water using only dye-sensitized interfaces for light capture.

Panaxydol, a polyacetylenic compound derived from Panax ginseng has been reported to suppress the growth of cancer cells. However, the molecular mechanisms underlying cell cycle arrest by this compound in non-small cell lung cancer (NSCLC) are unknown. Our study found that panaxydol treatment induced cell cycle arrest at G1 phase in NSCLC cells. The cell cycle arrest was accompanied by down-regulation of the protein expression of cyclin-dependent kinase (CDK) 2, CDK4, CDK6, cyclin D1 and cyclin E, and decrease in the phosphorylation of retinoblastoma (Rb) protein. Furthermore, up-regulation of cyclin-dependent kinase inhibitor (CDKI) p21CIP1/WAF1 and p27KIP1 was observed in panaxydol-treated NSCLC cells. In addition, panaxydol also induced accumulation of intracellular Ca2+ ([Ca2+]i). (Acetyloxy)methyl 2-({2-[(acetyloxy)methoxy]-2-oxoethyl}[2-(2-{2-[bis({2-[(acetyloxy)methoxy]-2-oxoethyl})amino]phenoxy}ethoxy)phenyl]amino)acetate (BAPTA-AM), the Ca2+ chelator, attenuated not only panaxydol-induced accumulation of [Ca2+]i, but also G1 cell cycle arrest and decrease of CDK6 and cyclin D1 protein expression level. These results demonstrated that the anti-proliferative effects of panaxydol were caused by cell cycle arrest, which is closely linked to the up-regulation of [Ca2+]i and represents a promising approach for the treatment of lung cancer.

The organic chromophore 2,2′-(benzo[c][1,2,5]thiadiazole-4,7-diyl)bis(thiophene-3-carboxylic acid), T2-BTD, was prepared and investigated along with metal complex [Ru(bda)(pyP)2] (bda = 2,2′-bipyridine-6,6′-dicarboxylate; pyP = 3-(pyridine-4-yloxy)propyl)phosphonic acid), RuC, for light-driven water splitting in dye-sensitized photoelectrochemical cells. The resulting co-loaded organic chromophore plus catalyst surface assembly was evaluated by photocurrent transient measurement and direct O2 detection using a collector–generator cell. The complete SnO2/TiO2 core–shell-based photoanode exhibited an enhanced photocurrent (∼38 μA cm–2) compared to that with only the chromophore (∼24 μA cm–2). A modest Faradaic efficiency of 12% was recorded for O2 generation under 1 sun illumination in pH 3.9, 0.1 M acetate buffer solutions.

The trimeric perfluoro-o-phenylene mercury compound Hg3 and poly(2-methoxy,5-(2′-ethylhexyloxy)-1,4-phenylenevinylene (MEH-PPV) interact strongly in solution and the solid state. The interaction is attributed to electron donor–acceptor complex formation, where MEH-PPV is the donor, and the Lewis acid Hg3 is the acceptor. The study reported herein explores the effects of the donor–acceptor complex formation on the properties of MEH-PPV in solution and in the solid state. Addition of Hg3 to MEH-PPV solution or films leads to a distinct color change, and the change in the visible absorption spectrum and fluorescence of MEH-PPV is consistent with the formation of polymer aggregates. In the solid state, Hg3 induced aggregation is suggested to lead to formation of crystalline domains of the conjugated polymer. Transmission electron microscopy and grazing incidence X-ray scattering results support the hypothesis that the complex formation with Hg3 induces aggregation of the polymer. Transient absorption spectros...

Background: Extended endoplasmic reticulum (ER) stress may initiate apoptotic pathways in cancer cells, and ER stress has been reported to possibly increase tumor death in cancer therapy. We previously reported that caspase-8 played an important role in compound K-induced apoptosis via activation of caspase-3 directly or indirectly through Bid cleavage, cytochrome c release, and caspase-9 activation in HL-60 human leukemia cells. The mechanisms leading to apoptosis in A549 and SK-MES-1 human lung cancer cells and the role of ER stress have not yet been understood. Methods: The apoptotic effects of compound K were analyzed using flow cytometry, and the changes in protein levels were determined using Western blot analysis. The intracellular calcium levels were monitored by staining with Fura-2/AM and Fluo-3/AM. Results: Compound K-induced ER stress was confirmed through increased phosphorylation of eIF2α and protein levels of GRP78/BiP, XBP-1S, and IRE1α in human lung cancer cells. Moreover, compound-K led to the accumulation of intracellular calcium and an increase in m-calpain activities that were both significantly inhibited by pretreatment either with BAPTA-AM (an intracellular Ca2+ chelator) or dantrolene (an RyR channel antagonist). These results were correlated with the outcome that compound K induced ER stress-related apoptosis through caspase-12, as z-ATAD-fmk (a specific inhibitor of caspase-12) partially ameliorated this effect. Interestingly, 4-PBA (ER stress inhibitor) dramatically improved the compound K-induced apoptosis. Conclusion: Cell survival and intracellular Ca2+ homeostasis during ER stress in human lung cancer cells are important factors in the induction of the compound K-induced apoptotic pathway. Keywords: apoptosis, calcium, compound K, ER stress, lung cancer cells

A polystyrene-based chromophore-catalyst assembly (poly-2) has been synthesized and assembled at a mesoporous metal oxide photoanode. The assembly contains water oxidation catalyst centers based on [Ru(trpy) (phenq)]2+ (Ru-Cat) and [Ru(bpy)3]2+ derivatives (Ru-C) as chromophores (trpy= 2,2′;6,2″- terpyridine, phenq = 2-(quinol-8′-yl)-1,10-phenanthroline and bpy = 2,2′-bipyridine). The photophysical and electrochemical properties of the polychromophore-oxidation catalyst assembly were investigated in solution and at the surface of mesoporous metal oxide films. The layer-by-layer (LbL) method was utilized to construct multilayer films with cationic poly-2 and anionic poly(acrylic acid) (PAA) for light-driven photochemical oxidations. Photocurrent measurements of (PAA/poly-2)10 LbL films on mesoporous TiO2 demonstrate light-driven oxidation of phenol and benzyl alcohol in aqueous solution. Interestingly, illumination of (PAA/poly-2)5 LbL films on a fluorine doped SnO2/TiO2 core/shell photoanode in aqueous so...

Because of the importance of hydrogen atom transfer (HAT) in biology and chemistry, there is increased interest in new strategies to perform HAT in a sustainable manner. Here, we describe a sustainable, net redox-neutral HAT process involving hydrosilanes and alkali metal Lewis base catalysts — eliminating the use of transition metal catalysts — and report an associated mechanism concerning Lewis base-catalysed, complexation-induced HAT (LBCI-HAT). The catalytic LBCI-HAT is capable of accessing both branch-specific hydrosilylation and polymerization of vinylarenes in a highly selective fashion, depending on the Lewis base catalyst used. In this process, earth abundant, alkali metal Lewis base catalyst plays a dual role. It first serves as a HAT initiator and subsequently functions as a silyl radical stabilizing group, which is critical to highly selective cross-radical coupling. EPR study identified a potassiated paramagnetic species and multistate density function theory revealed a high HAT character, yet multiconfigurational nature in the transition state of the reaction., Graphical Abstract

Previously, we reported that 6-(3,4-dihydro-1H-isoquinolin-2-yl)-N-(6-methylpyridin-2-yl) nicotinamide (DIMN) analogues inhibited the growth of prostate cancer cells as an anti-androgenic compound. In the present study, we evaluated cytotoxic effects of these DIMN derivatives and found that DIMN-26 most potently inhibited the proliferation of the LNCap-LN3 androgen-dependent and DU145 androgen-independent prostate cancer cells through induction of G2/M phase cell cycle arrest and subsequent apoptosis. The G2/M phase arrest was found due to increases in the activation of cdc2 (also known as cyclin-dependent kinase 1, CDK1)/cyclin B1 complex. DIMN-26 also induced apoptosis in LNCap-LN3 and DU145 prostate cancer cells through activation of caspase-3, -8, and -9, and cleavage of poly(ADP-ribose) polymerase-1 (PARP-1). In addition, DIMN-26 caused the dephosphorylation and mitochondrial accumulation of Bad protein and induced the loss of mitochondria membrane potential, consequently releasing cytochrome c into the cytosol of the cell. Furthermore, overexpression of AKT protein significantly reduced DIMN-26-induced PARP-1 cleavage and p-Bad decrease and cdc2 activation. In addition, DIMN-26 inhibited the 5α-dihydrotestosterone (DHT)-induced cell growth and proliferation and nuclear translocation and transcriptional activities of androgen receptor (AR) in LNCap-LN3 prostate cancer cells. Consistent with these findings, DIMN-26 significantly inhibited the DHT-induced expression of AR-response genes (ARGs), such as prostate-specific antigen (PSA), AR, β2-microglobulin (B2M), selenoprotein P (SEPP1), and ste20-related proline-alanine-rich kinase (SPAK) in LNCap-LN3 prostate cancer cells. Taken together, these results suggest that DIMN-26 plays a therapeutic role not only in induction of G2/M arrest and apoptosis but also in suppression of androgen receptor signaling in androgen-dependent and androgen-independent prostate cancer cells.

Layer-by-Layer (LbL) polyelectrolyte self-assembly occurs by the alternate exposure of a substrate to solutions of oppositely charged polyelectrolytes or polyions. Here, we report the application of LbL to construct chromophore–catalyst assemblies consisting of a cationic polystyrene-based Ru polychromophore (PS-Ru) and a [Ru(tpy)(2-pyridyl-N-methylbenzimidazole) (OH2)]2+ water oxidation catalyst (RuC), codeposited with poly(acrylic acid) (PAA) as an inert polyanion. These assemblies are deposited onto planar indium tin oxide (ITO, Sn:In2O3) substrates for electrochemical characterization and onto mesoporous substrates consisting of a SnO2/TiO2 core/shell structure atop fluorine doped tin oxide (FTO) for application to light-driven water oxidation in a dye-sensitized photoelectrosynthesis cell. Cyclic voltammetry and ultraviolet–visible absorption spectroscopy reveal that multilayer deposition progressively increases the film thickness on ITO glass substrates. Under an applied bias, photocurrent measureme...

As a result of our continuous research, new 3,4-dihydroquinazoline derivative containing ureido group, KCP10043F was synthesized and evaluated for T-type Ca(2+) channel (Cav3.1) blockade, cytotoxicity, and cell cycle arrest against human non-small cell lung (A549) cells. KCP10043F showed both weaker T-type Ca(2+) channel blocking activity and less cytotoxicity against A549 cells than parent compound KYS05090S [4-(benzylcarbamoylmethyl)-3-(4-biphenylyl)-2-(N,N',N'-trimethyl-1,5-pentanediamino)-3,4-dihydroquinazoline 2 hydrochloride], but it exhibited more potent G1-phase arrest than KYS05090S in A549 cells. This was found to be accompanied by the downregulations of cyclin-dependent kinase (CDK) 2, CDK4, CDK6, cyclin D2, cyclin D3, and cyclin E at the protein levels. However, p27(KIP1) as a CDK inhibitor was gradually upregulated at the protein levels and increased recruitment to CDK2, CDK4 and CDK6 after KCP10043F treatment. Based on the strong G1-phase cell cycle arrest of KCP10043F in A549 cells, the combination of KCP10043F with etoposide (or cisplatin) resulted in a synergistic cell death (combination index=0.2-0.8) via the induction of apoptosis compared with either agent alone. Taken together with these overall results and the favorable in vitro ADME (absorption, distribution, metabolism, and excretion) profiles of KCP10043F, therefore, it could be used as a potential agent for the combination therapy on human lung cancer.

Panaxydol, a polyacetylenic compound derived from Panax ginseng has been reported to suppress the growth of cancer cells. However, the molecular mechanisms underlying cell cycle arrest by this compound in non-small cell lung cancer (NSCLC) are unknown. Our study found that panaxydol treatment induced cell cycle arrest at G

A previous study reported that a novel dammarane-type triterpene saponin, ginsenoside-Rg18, derived from the root of Panax ginseng, displayed hydroxyl radical scavenging, anti-bacterial and cytotoxic activities. However, the underlying molecular mechanisms of its anti-proliferative effect on non-small cell lung cancer (NSCLC) A549 cells remains unclear. In the present study, it was determined that Rg18 inhibited the proliferation of A549 cells with a half-maximal inhibitory concentration of 150 µM. Flow cytometry analysis indicated that cell cycle progression was blocked by Rg18 at G1 phase in A549 cells, which was accompanied by downregulation of cyclin-dependent kinase 2 (CDK2), CDK4, CDK6, cyclin D1, cyclin D2, cyclin E and phosphorylated retinoblastoma protein expression at the protein level. In addition, the CDK inhibitors (CDKNs), CDKN1A and CDKN1B, were upregulated following Rg18 treatment. Furthermore, Rg18 treatment resulted in the intracellular accumulation of reactive oxygen species (ROS), and a dose-dependent inhibition of p38 mitogen activated protein kinase (p38), c-Jun N-terminal kinase (JNK) and nuclear factor-κB (NF-κB)/p65 phosphorylation. Taken together, Rg18-mediated G1 phase arrest was closely associated with the generation of intracellular ROS, and p38, JNK and NF-κB/p65 inhibition in A549 human NSCLC cells.

A series of polystyrene-based light harvesting polymers featuring pendant polypyridyl ruthenium complexes has been synthesized. The polymer backbones were prepared by nitroxide-mediated radical polymerization with a variable average molecular weight (Mn) ranging from ∼5500 to ∼24 000 g mol−1. Pendant Ru(II) polypyridyl complexes were grafted to the polymer backbone by azide–alkyne click chemistry to afford chromophore loaded polymers. The resulting polystyrene-based polychromophores with pendant Ru(II) polypyridyl complexes (PS-Ru) were characterized by nuclear magnetic resonance and infrared spectroscopy, confirming the high efficiency of the click grafting. The photophysical and electrochemical properties of the series of PS-Ru polymers were characterized in solution and investigated as a function of polymer chain length and solvent. The electrochemical properties of PS-Ru maintained the characteristics of the individual Ru(II) polypyridyl units. Emission quantum yield and lifetime studies reveal that the metal-to-ligand charge transfer (MLCT) excited states are quenched to a variable extent depending on the molecular weight of the polymers, consistent with intramolecular energy transfer and self-quenching in polymers with longer chain lengths. To support the synthetic effort, molecular dynamics simulations of the polypyridyl ruthenium derivatized polystyrenes in different solvents were conducted.

The synthesis of polymer-based assemblies for light harvesting has been motivated by the multi-chromophore antennas that play a role in natural photosynthesis for the potential use in solar conversion technologies. This review describes a general strategy for using polymer-based chromophore–catalyst assemblies for solar-driven water oxidation at a photoanode in a dye-sensitized photoelectrochemical cell (DSPEC). This report begins with a summary of the synthetic methods and fundamental photophysical studies of light harvesting polychormophores in solution which show these materials can transport excited state energy to an acceptor where charge-separation can occur. In addition, studies describing light harvesting polychromophores containing an anchoring moiety (ionic carboxylate) for covalent bounding to wide band gap mesoporous semiconductor surfaces are summarized to understand the photophysical mechanisms of directional energy flow at the interface. Finally, the performance of polychromophore/catalyst assembly-based photoanodes capable of light-driven water splitting to oxygen and hydrogen in a DSPEC are summarized.

This paper describes the photophysical and photoelectrochemical characterization of a light harvesting polychromophore array featuring a polyfluorene backbone with covalently attached Ru(II) polypyridyl complexes (PF-Ru-A), adsorbed on the surface of mesostructured TiO2 (PF-Ru-A//TiO2). The surface adsorbed polymer is characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, providing evidence for the morphology of the surface adsorbed polymer and the mode of binding. Photoexcitation of the Ru(II) complexes bound to the metal oxide surface (proximal) results in electron injection into the conduction band of TiO2, which is then followed by ultrafast hole transfer to the polymer to form oxidized polyfluorene (PF+). More interestingly, chromophores that are not directly bound to the TiO2 interface (distal) that are excited participate in site-to-site energy transfer processes that transport...