Search

The effect that the hydrodynamic conditions under which biofilms are formed has on their persistence is still unknown. This study assessed the behaviour of Pseudomonas fluorescens biofilms, formed on stainless steel under different shear stress ( τ w ) conditions (1, 2 and 4 Pa), to chemical (benzalkonium chloride – BAC, glutaraldehyde – GLUT and sodium hypochlorite – SHC) and mechanical (20 Pa) treatments (alone and combined). The biofilms formed under different τ w showed different structural characteristics. Those formed under a higher τ w were invariably more tolerant to chemical and mechanical stresses. SHC was the biocide which caused the highest biofilm killing and removal, followed by BAC. The sequential exposure to biocides and mechanical stress was found to be insufficient for effective biofilm control. A basal layer containing biofilm cells mostly in a viable state remained on the surface of the cylinders, particularly for the 2 and 4 Pa-generated biofilms. [ABSTRACT FROM AUTHOR]

This work aimed to evaluate the action of materials with different copper content (0, 57, 96 and 100%) on biofilm formation and control by chlorination and mechanical stress. Stenotrophomonas maltophilia isolated from drinking water was used as a model microorganism and biofilms were developed in a rotating cylinder reactor using realism-based shear stress conditions. Biofilms were characterized phenotypically and exposed to three control strategies: 10 mg l−1 of free chlorine for 10 min, an increased shear stress (a fluid velocity of 1.5 m s−1 for 30s), and a combination of both treatments. These shock treatments were not effective in biofilm control. The benefits from the use of copper surfaces was found essentially in reducing the numbers of non-damaged cells. Copper materials demonstrated better performance in biofilm prevention than chlorine. In general, copper alloys may have a positive public health impact by reducing the number of non-damaged cells in the water delivered after chlorine exposure. [ABSTRACT FROM AUTHOR]

The development of biofilms in drinking water distribution systems (DWDS) can cause pipe degradation, changes in the water organoleptic properties but the main problem is related to the public health. Biofilms are the main responsible for the microbial presence in drinking water (DW) and can be reservoirs for pathogens. Therefore, the understanding of the mechanisms underlying biofilm formation and behavior is of utmost importance in order to create effective control strategies. As the study of biofilms in real DWDS is difficult, several devices have been developed. These devices allow biofilm formation under controlled conditions of physical (flow velocity, shear stress, temperature, type of pipe material, etc), chemical (type and amount of nutrients, type of disinfectant and residuals, organic and inorganic particles, ions, etc) and biological (composition of microbial community - type of microorganism and characteristics) parameters, ensuring that the operational conditions are similar as possible to the DWDS conditions in order to achieve results that can be applied to the real scenarios. The devices used in DW biofilm studies can be divided essentially in two groups, those usually applied in situ and the bench top laboratorial reactors. The selection of a device should be obviously in accordance with the aim of the study and its advantages and limitations should be evaluated to obtain reproducible results that can be transposed into the reality of the DWDS. The aim of this review is to provide an overview on the main reactors used in DW biofilm studies, describing their characteristics and applications, taking into account their main advantages and limitations. [ABSTRACT FROM AUTHOR]

The contamination of indoor areas is a global health problem that can cause the dispersion of infectious diseases. In that sense, it is urgent to find new strategies applying a lower concentration of the traditional chemicals used for cleaning and disinfection. Ultraviolet radiation (UV), in particular far-UV-C (200-225 nm), has emerged as a successful, powerful, easy-to-apply, and inexpensive approach for bacterial eradication that still requires scientific assessment. This study investigated new strategies for disinfection based on far-UV-C (222 nm) combined with chlorine and mechanical cleaning, providing an innovative solution using low doses. The bactericidal activity of far-UV-C (222 nm) was tested at an intensity of irradiation from 78.4 μW/cm 2 to 597.7 μW/cm 2 (for 1 min) against Escherichia coli and Staphylococcus epidermidis adhered on polystyrene microtiter plates. It was further tested in combination with mechanical cleaning (ultrasounds for 1 min) and free chlorine (0.1, 0.5, and 1 mg/L for 5 min). The triple combination consisting of mechanical cleaning + free chlorine (0.5 mg/L) + far-UV-C (54 mJ/cm 2 ) was tested against cells adhered to materials found in hospital settings and other public spaces: polyvinyl chloride (PVC), stainless steel (SS), and polyetheretherketone (PEEK). Disinfection with far-UV-C (54 mJ/cm 2 ) and free chlorine at 0.5 mg/L for 5 min allowed a total reduction of culturable E. coli cells and a logarithmic reduction of 2.98 ± 0.03 for S. epidermidis. The triple combination of far-UV-C, free chlorine, and mechanical cleaning resulted in a total reduction of culturable cells for both adhered bacteria. Bacterial adhesion to PVC, SS, and PEEK occurred at distinct extents and influenced the bactericidal activity of the triple combination, with logarithmic reductions of up to three. The overall results highlight that, based on culturability assessment, far-UV-C (54 mJ/cm 2 ) with chlorine (0.5 mg/L; 5 min) and mechanical cleaning (1 min) as an efficient disinfection strategy using mild conditions. The combination of culturability and viability assessment of disinfection is recommended to detect regrowth events and increase the effectiveness in microbial growth control., Competing Interests: Declaration of competing interest The authors declare that they have no competing financial interests or conflicts of interest in the writing of this article., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

The advent of antimicrobial resistance has added considerable impact to infectious diseases both in the number of infections and healthcare costs. Furthermore, the relentless emergence of multidrug-resistant bacteria, particularly in the biofilm state, has made mandatory the discovery of new alternative antimicrobial therapies that are capable to eradicate resistant bacteria and impair the development of new forms of resistance. Amongst the therapeutic strategies for treating biofilms, antimicrobial photodynamic therapy (aPDT) has shown great potential in inactivating several clinically relevant micro-organisms, including antibiotic-resistant 'priority bacteria' declared by the WHO as critical pathogens. Its antimicrobial effect is centred on the basis that harmless low-intensity light stimulates a non-toxic dye named photosensitizer, triggering the production of reactive oxygen species upon photostimulation. In addition, combination therapies of aPDT with other antimicrobial agents (e.g. antibiotics) have also drawn considerable attention, as it is a multi-target strategy. Therefore, the present review highlights the recent advances of aPDT against biofilms, also covering progress on combination therapy., (© 2022 Society for Applied Microbiology.)

The presence of pharmaceuticals in water sources, including in drinking water (DW), is increasingly being recognized as an emerging and global concern for the environment and public health. Based on the principles of the "One Health" initiative, the present work aims to understand the effects of clofibric acid (CA), a lipid regulator, on the behavior of a selected bacterium isolated from drinking water (DW). Biofilms of the opportunistic pathogen Stenotrophomonas maltophilia were exposed to CA for 12 weeks at 170 and 17000 ng/L. The effects of CA were evaluated on planktonic S. maltophilia susceptibility to chlorine and antibiotics (amoxicillin, ciprofloxacin, erythromycin, kanamycin, levofloxacin, oxacillin, spectinomycin, tetracycline and trimethoprim-sulfamethoxazole), biofilm formation, motility, siderophores production and on the adhesion and internalization of the human colon adenocarcinoma cell line (HT-29). It was found that CA did not affect planktonic S. maltophilia tolerance to chlorine exposure. Additionally, no effects were observed on biofilm formation, motility and siderophores production. However, biofilms formed after CA exposure were more tolerant to chlorine disinfection and lower CFU reductions were obtained. Of additional concern was the effect of CA exposure on S. maltophilia increased tolerance to erythromycin. CA exposure also slightly reduced S. maltophilia ability to invade HT-29 cells. In conclusion, this work reinforces the importance of studying the effects of non-antibiotic contaminants on the behavior of environmental microorganisms, particularly their role as drivers affecting resistance evolution and selection., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

The presence of biofilms in drinking water distribution systems (DWDS) is a global public health concern as they can harbor pathogenic microorganisms. Sodium hypochlorite (NaOCl) is the most commonly used disinfectant for microbial growth control in DWDS. However, its effect on biofilm removal is still unclear. This work aims to evaluate the effects of the combination of chemical (NaOCl) and mechanical stresses on the removal of single and dual species biofilms of two bacteria isolated from DWDS and considered opportunistic, Acinectobacter calcoaceticus and Stenotrophomonas maltophilia. A rotating cylinder reactor was successfully used for the first time in drinking water biofilm studies with polyvinyl chloride as substratum. The single and dual species biofilms presented different characteristics in terms of metabolic activity, mass, density, thickness and content of proteins and polysaccharides. Their complete removal was not achieved even when a high NaOCl concentrations and an increasing series of shear stresses (from 2 to 23Pa) were applied. In general, NaOCl pre-treatment did not improve the impact of mechanical stress on biofilm removal. Dual species biofilms were colonized mostly by S. maltophilia and were more susceptible to chemical and mechanical stresses than these single species. The most efficient treatment (93% biofilm removal) was the combination of NaOCl at 175mg·l -1 with mechanical stress against dual species biofilms. Of concern was the high tolerance of S. maltophilia to chemical and mechanical stresses in both single and dual species biofilms. The overall results demonstrate the inefficacy of NaOCl on biofilm removal even when combined with high shear stresses., (Copyright © 2018 Elsevier B.V. All rights reserved.)

The effect of nitrification, nitratation and heterotrophic conditions on the biotransformation of several pharmaceuticals in a highly enriched nitrifying activated sludge was evaluated in this study by selective activation of ammonia oxidizing bacteria (AOB), nitrite oxidizing bacteria (NOB) and heterotrophic bacteria. Nitrifiers displayed a noticeable capacity to process ibuprofen due to hydroxylation by ammonia monooxygenase (AMO) to produce 2-hydroxy-ibuprofen. Naproxen was also biotransformed under nitrifying conditions. On the other hand, heterotrophic bacteria present in the nitrifying activated sludge (NAS) biotransformed sulfamethoxazole. In contrast, both nitrifying and heterotrophic activities were ineffective against diclofenac, diazepam, carbamazepine and trimethoprim. Similar biotransformation rates of erythromycin, roxithromycin and fluoxetine were observed under all conditions tested. Overall, results from this study give more evidence on the role of the different microbial communities present in activated sludge reactors on the biological removal of pharmaceuticals., (Copyright © 2015 Elsevier B.V. All rights reserved.)