Search

Objectives To evaluate a rapid diagnostic algorithm based on MALDI-TOF MS, lateral flow immunoassays (LFIAs) and molecular testing performed directly from positive blood cultures (BCs) for Gram-negative species identification and detection of CTX-M extended-spectrum β-lactamases and main carbapenemases. Methods Non-duplicate BCs positive to Gram-negative bacteria at microscope examination were subjected to species identification by direct MALDI-TOF MS following recovery of bacterial pellet by Rapid MBT Sepsityper® kit. Subsequently, NG-Test® CARBA 5 and NG-Test® CTX-M MULTI LFIAs were performed according to identified microbial species. Eazyplex® SuperBug CRE molecular assay was performed in cases of NG-Test® CARBA 5 negative results in patients with documented carbapenemase-producers carriage. Results of rapid diagnostic workflow were compared with those obtained by conventional diagnostic routine. Results Overall, the direct MALDI-TOF MS protocol allowed reliable identification to the species level of 92.1% of the 2133 monomicrobial BCs. Rate of matched identification was significantly higher for Enterobacterales (97.3%) in comparison to non-fermenting Gram-negative species (80.2%), obligate anaerobic bacteria (42.1%) and fastidious Gram-negative species (41.5%). The overall sensitivity of NG-Test® CARBA 5 and NG-Test® CTX-M MULTI was 92.2% and 91.6%, respectively. Integration of Easyplex® SuperBug CRE allowed the detection of blaKPC mutants associated with ceftazidime/avibactam resistance, reaching 100% sensitivity in carbapenemase detection. Both LFIAs and molecular testing showed no false-positive results. Conclusions Algorithms based on MALDI-TOF MS, LFIAs and molecular testing may represent a cost-effective tool to timely identify Gram-negative species and detect resistance markers directly from BCs. According to local epidemiology, these results may allow antimicrobial stewardship interventions including prompt use of new approved drugs.

Nanofibers can play an important role in developing new kinds of medical applications. Poly(lactic acid) (PLA) and PLA/poly(ethylene oxide) (PEO) antibacterial mats containing silver nanoparticles (AgNPs) were prepared by a simple one-step electrospinning method that allows AgNPs to be synthesized simultaneously with the preparation of the electrospinning solution. The electrospun nanofibers were characterized by scanning electron microscopy, transmission electron microscopy and thermogravimetry, while silver release over time was monitored by inductively coupled plasma/optical emission spectroscopy. The antibacterial activity was tested against Staphylococcus epidermidis and Escherichia coli by colony forming unit (CFU) count on agar after 15, 24 and 48 h of incubation. AgNPs were found to be mainly concentrated in the PLA nanofiber core, and the mats showed steady but slow Ag release in the short term; in contrast, AgNPs were uniformly distributed in the PLA/PEO nanofibers, which released up to 20% of their initial silver content in 12 h. A significant (p < 0.05) antimicrobial effect towards both tested bacteria, highlighted by a reduction in the CFU/mL counts, was observed for the nanofibers of PLA and PLA/PEO embedded with AgNPs, with a stronger effect exerted by the latter, confirming the more efficient silver release from these samples. The prepared electrospun mats may have good potential for use in the biomedical field, particularly in wound dressing applications, where a targeted delivery of the antimicrobial agent is highly desirable to avoid infections.

Polymorphonuclear leukocytes (PMNs) are the most important cell type involved in the early nonspecific host response to bacterial pathogens. Staphylococcus aureus has evolved mechanisms to evade immune responses that contribute to its persistence in PMNs, and acquired resistance to several antimicrobials. Additionally, methicillin-resistant S. aureus (MRSA) is one of the most common causes of acute bacterial skin and skin-structure infections (ABSSSIs). Dalbavancin (DBV), a lipoglycopeptide, is indicated for the treatment of ABSSSIs, and has a broad spectrum of action against most microorganisms. Here, we sought to determine the effect of DBV on the neutrophil killing of MRSA and its potential immunomodulating activity. Our results revealed that DBV boosts MRSA killing by acting on both bacteria and PMNs. DBV pre-treatment of PMNs did not change the respiratory burst or degranulation, while an increased trend in neutrophil extracellular traps-associated elastase and in the production of TNFα and CXCL8 was revealed. In parallel, DBV caused a delay in the apoptosis of MRSA-infected neutrophils. In conclusion, we demonstrated a cooperative effect between the antimicrobial properties of PMNs and DBV, thus owing to their immunomodulatory activity. In the choice of the treatment management of serious S. aureus infections, DBV should be considered as an outstanding option since it reinforces PMNs pathogen clearance capability by exerting its effect directly, not only on MRSA but also on neutrophils.

Infections triggered by filamentous fungi placed in the order Mucorales, phylum Zygomycota, can cause serious harm to immunocompromised patients. Since there is lack of a standardized PCR (polymerase chain reaction) assay for early diagnosis of this fungal infection, this work was aimed to develop a new PCR assay able to detect the presence of Mucorales genera in clinical specimens. Here, we describe a novel diagnostic TaqMan MGB probe assay for precise and rapid detection of the most common clinical species of Mucorales. Zygomycete-specific oligonucleotides were designed to specifically amplify and bind highly conserved sequences of fungal 28S rRNA gene. Additionally, we succeeded in differentiating Mucorales species (i.e., Rhizopus, Lichtheimia, Mucor, and Rhizomucor) in artificially infected serum samples, suggesting that the quantitative capability of this real-time PCR assay could potentially optimize the diagnosis of mucormycosis.

Resistance to clinical triazoles in Aspergillus fumigatus is a growing concern for individuals at high risk of Aspergillus infection. Two triazole resistance selection routes are currently being investigated: one occurring in triazole-treated patients in healthcare settings, and the second taking place in the environment due to the widespread use of agricultural triazoles. This study aimed to assess the ability of agricultural azoles to promote cross-resistance to clinical azoles in A. fumigatus. Five A. fumigatus isolates susceptible to clinical azoles were exposed to the triazole 14α-demethylase inhibitor, tebuconazole (TBC), and then antifungal susceptibility tests for voriconazole, itraconazole, posaconazole and isavuconazole were performed. Under TBC selection pressure, all A. fumigatus isolates exhibited resistance to clinical triazoles. However, only two displayed a multiresistant phenotype to clinical azoles. TBC exposure was also associated with delayed conidia formation and progressive absence of conidiation. Noteworthy, no TBC-exposed clones harbored TR34/L98H mutation, as judged by real-time PCR assays. The observation that TBC exposure promotes cross-resistance to clinical triazoles warrants careful and thorough assessment of the human health risk associated with agricultural azoles. The absence of TR34/L98H mutation in cross-resistant A. fumigatus isolates suggests that other cyp51A mutations may be involved in clinical azole cross-resistance.

Streptococcus pyogenes causes a wide spectrum of diseases varying from mild to life threatening, despite antibiotic treatment. Nanoparticle application could facilitate the foreign pathogen fight by increasing the antimicrobial effectiveness and reducing their adverse effects. Here, we designed and produced erythromycin-loaded chitosan nanodroplets (Ery-NDs), both oxygen-free and oxygen-loaded. All ND formulations were characterized for physico-chemical parameters, drug release kinetics, and tested for biocompatibility with human keratinocytes and for their antibacterial properties or interactions with S. pyogenes. All tested NDs possessed spherical shape, small average diameter, and positive Z potential. A prolonged Ery release kinetic from Ery-NDs was demonstrated, as well as a favorable biocompatibility on human keratinocytes. Confocal microscopy images showed ND uptake and internalization by S. pyogenes starting from 3 h of incubation up to 24 h. According to cell counts, NDs displayed long-term antimicrobial efficacy against streptococci significantly counteracting their proliferation up to 24 h, thanks to the known chitosan antimicrobial properties. Intriguingly, Ery-NDs were generally more effective (104–103 log10 CFU/mL), than free-erythromycin (105 log10 CFU/mL), in the direct killing of streptococci, probably due to Ery-NDs adsorption by bacteria and prolonged release kinetics of erythromycin inside S. pyogenes cells. Based on these findings, NDs and proper Ery-NDs appear to be the most promising and skin-friendly approaches for the topical treatment of streptococcal skin infections allowing wound healing during hypoxia.

Positive and negative ions (PAIs and NAIs, respectively) generated by air ionizers curb indoor spread of airborne pathogens through cellular oxidative damage. Thus, here, we asked whether ion exposure of Staphylococcus aureus and Escherichia coli bacteria—either plated on agar or trapped in air filters—would affect their viability and whether this effect would be influenced by variations in bacterial type and load, action area, distance from the ion generator, exposure time, or filter type. We selected these two vegetative bacterium species because, besides being representative of Gram-positive and Gram-negative strains, respectively, they are widely recognized as the two most common airborne pathogens. We observed a robust ion inhibitory effect on the viability of free bacteria regardless of the experimental condition employed. Specifically, 12-h ion exposure of plated S. aureus and E. coli, at either 5 cm or 10 cm from the ion source, reduced bacterial viability by ∼95% and 70%, respectively. Furthermore, 3-h ion exposure was sufficient to reduce the viability of both bacterial species trapped in filters. Our results showing a strong antibacterial activity of PAI and NAI under all experimental conditions tested further support the use of air ionizers for preventing and/or containing airborne infection in domestic and nondomestic settings. IMPORTANCE Indoor air is a well-established vehicle for direct and indirect spread of a wide variety of human pathogens—as bioaerosols are composed of bacteria, viruses, fungi, and other types of organisms—that may trigger some pathologies. Plasmacluster ionizers are known for their ability to generate positively or negatively charged air ions (PAIs and NAIs, respectively) that can kill/inactivate indoor airborne pathogens, through oxidative stress-induced damage, in various environments. Given these premises, the aim of this study was to evaluate the viability of Gram-positive and Gram-negative bacteria exposed to PAI and NAI under different experimental variables such as bacterial type and load, action area, distance from the ion generator, ion exposure time, and filter type. Altogether, our findings, demonstrating a remarkable PAI and NAI antibacterial activity, stress the importance of using air ionizers to prevent indoor airborne infection.

Narcisa Mandras,1 Monica Argenziano,2 Mauro Prato,1 Janira Roana,1 Anna Luganini,3 Valeria Allizond,1 Vivian Tullio,1 Nicole Finesso,4 Sara Comini,1 Bruno Emilio Bressan,4 Francesca Pecoraro,4 Giuliana Giribaldi,4 Adriano Troia,5 Roberta Cavalli,2 Anna Maria Cuffini,1,&ast; Giuliana Banche1,&ast; 1Department of Public Health and Pediatric Sciences, University of Torino, Turin, 10126, Italy; 2Department of Drug Science and Technology, University of Torino, Turin, 10125, Italy; 3Department of Life Sciences and Systems Biology, University of Torino, Turin, 10123, Italy; 4Department of Oncology, University of Torino, Turin, 10126, Italy; 5Istituto Nazionale di Ricerca Metrologica, Turin, 10135, Italy&ast;These authors contributed equally to this workCorrespondence: Valeria Allizond, Department of Public Health and Pediatric Sciences, University of Torino, Via Santena 9, Turin, 10126, Italy, Tel +390116705644, Fax +390112365644, Email valeria.allizond@unito.itPurpose: Medium versus low weight (MW vs LW) chitosan-shelled oxygen-loaded nanodroplets (cOLNDs) and oxygen-free nanodroplets (cOFNDs) were comparatively challenged for biocompatibility on human keratinocytes, for antimicrobial activity against four common infectious agents of chronic wounds (CWs) – methicillin-resistant Staphylococcus aureus (MRSA), Streptococcus pyogenes, Candida albicans and C. glabrata – and for their physical interaction with cell walls/membranes.Methods: cNDs were characterized for morphology and physico-chemical properties by microscopy and dynamic light scattering. In vitro oxygen release from cOLNDs was measured through an oximeter. ND biocompatibility and ability to promote wound healing in human normoxic/hypoxic skin cells were challenged by LDH and MTT assays using keratinocytes. ND antimicrobial activity was investigated by monitoring upon incubation with/without MW or LW cOLNDs/cOFNDs either bacteria or yeast growth over time. The mechanical interaction between NDs and microorganisms was also assessed by confocal microscopy.Results: LW cNDs appeared less toxic to keratinocytes than MW cNDs. Based on cell counts, either MW or LW cOLNDs and cOFNDs displayed long-term antimicrobial efficacy against S. pyogenes, C. albicans, and C. glabrata (up to 24 h), whereas a short-term cytostatic effects against MRSA (up to 6 h) was revealed. The internalization of all ND formulations by all four microorganisms, already after 3 h of incubation, was showed, with the only exception to MW cOLNDs/cOFNDs that adhered to MRSA walls without being internalized even after 24 h.Conclusion: cNDs exerted bacteriostatic and fungistatic effects, due to the presence of chitosan in the outer shell and independently of oxygen addition in the inner core. The duration of such effects strictly depends on the characteristics of each microbial species, and not on the molecular weight of chitosan in ND shells. However, LW chitosan was better tolerated by human keratinocytes than MW. For these reasons, the use of LW NDs should be recommended in future research to assess cOLND efficacy for the treatment of infected CWs.Keywords: chitosan nanodroplets, methicillin-resistant Staphylococcus aureus, Streptococcus pyogenes, Candida spp, chronic wounds

In this study, we designed and developed novel poly(ε-caprolactone) (PCL)-based biomaterials, for use as bone scaffolds, through modification with both biphasic calcium phosphate (BCP), to impart bioactive/bioresorbable properties, and with silver nitrate, to provide antibacterial protection against Staphylococcus aureus, a microorganism involved in prosthetic joint infections (PJIs). Field emission scanning electron microscopy (FESEM) showed that the samples were characterized by square-shaped macropores, and energy dispersive X-ray spectroscopy analysis confirmed the presence of PCL and BCP phases, while inductively coupled plasma–mass spectrometry (ICP–MS) established the release of Ag+ in the medium (~0.15–0.8 wt% of initial Ag content). Adhesion assays revealed a significant (p &lt, 0.0001) reduction in both adherent and planktonic staphylococci on the Ag-functionalized biomaterials, and the presence of an inhibition halo confirmed Ag release from enriched samples. To assess the potential outcome in promoting bone integration, preliminary tests on sarcoma osteogenic-2 (Saos-2) cells indicated PCL and BCP/PCL biocompatibility, but a reduction in viability was observed for Ag-added biomaterials. Due to their combined biodegrading and antimicrobial properties, the silver-enriched BCP/PCL-based scaffolds showed good potential for engineering of bone tissue and for reducing PJIs as a microbial anti-adhesive tool used in the delivery of targeted antimicrobial molecules, even if the amount of silver needs to be tuned to improve osteointegration.

Persistent hypoxia is a main clinical feature of chronic wounds. Intriguingly, oxygen-loaded nanodroplets (OLNDs), filled with oxygen-solving 2H,3H-decafluoropentane and shelled with polysaccharides, have been proposed as a promising tool to counteract hypoxia by releasing a clinically relevant oxygen amount in a time-sustained manner. Here, four different types of chitosan (low or medium weight (LW or MW), glycol-(G-), and methylglycol-(MG-) chitosan) were compared as candidate biopolymers for shell manufacturing. The aim of the work was to design OLND formulations with optimized physico-chemical characteristics, efficacy in oxygen release, and biocompatibility. All OLND formulations displayed spherical morphology, cationic surfaces, ≤500 nm diameters (with LW chitosan-shelled OLNDs being the smallest), high stability, good oxygen encapsulation efficiency, and prolonged oxygen release kinetics. Upon cellular internalization, LW, MW, and G-chitosan-shelled nanodroplets did not significantly affect the viability, health, or metabolic activity of human keratinocytes (HaCaT cell line). On the contrary, MG-chitosan-shelled nanodroplets showed very poor biocompatibility. Combining the physico-chemical and the biological results obtained, LW chitosan emerges as the best candidate biopolymer for future OLND application as a skin device to treat chronic wounds.

The aim of this study was to evaluate the ability of a PIPS (photon-induced photoacoustic streaming) Er:YAG laser to reduce the root canal system bacterial count in vivo in comparison to the traditional irrigation technique. The post-operative patients&rsquo, quality of life (QoL) after endodontic therapy was evaluated through a questionnaire. Fifty-four patients affected by pulp necrosis with or without apical periodontitis biofilm disease were selected for endodontic treatment and randomly assigned to Group A (n = 27) with traditional irrigation and Group B (n = 27), with PIPS irrigation applied according to the protocol. Shaping was performed with ProGlider and ProTaper Next, and irrigation was performed with 5% NaOCl and 10% EDTA. Intracanal samples for culture tests were collected before and after irrigation. The microbiological analysis was evaluated by the Kolmogorov&ndash, Smirnov normality and Mann&ndash, Whitney tests (p &lt, 0.05). A self-assessment questionnaire was used to evaluate the QoL during the 7 days after treatment, differences were analysed with Student&rsquo, s t-test. Irrigation with the PIPS device was significantly effective in reducing bacterial counts, which were higher for facultative than obligate anaerobic strains, particularly for Gram-negative bacteria, without statistical significance (p &gt, 0.05). There were no significant differences among the QoL indicators, except for the maximum pain (p = 0.02), eating difficulty (p = 0.03) and difficulty performing daily functions (p = 0.02) in the first few days post-treatment. PIPS may represent an aid to root canal disinfection not affecting the patients&rsquo, QoL, particularly for the first day after treatment.

There is a growing optimism about the potential of new disease-modifying therapies (DMTs) in the management of relapsing-remitting multiple sclerosis (RRMS) patients. However, this initial enthusiasm has been tempered by evidence indicating that multiple sclerosis (MS) patients undergoing DMT may be at higher risk of developing infections through incompletely understood mechanisms. As neutrophils provide the first line of defense against pathogens, here we have compared the effects of some of the commonly used MS DMTs (i.e., moderate-efficacy injective, first-line: interferon&beta, 1b (IFN&beta, 1b), glatiramer acetate (GA), and high-efficacy, second-line: fingolimod (FTY) and natalizumab (NAT)) on the in vitro viability and functions of neutrophils isolated from healthy subjects. All the DMTs tested impaired the ability of neutrophils to kill Klebsiella pneumoniae, whereas none of them affected the rate of neutrophil apoptosis or CD11b and CD62L cell surface expression. Intriguingly, only FTY exposure negatively affected K. pneumoniae-induced production of reactive oxygen species (ROS) in polymorphonuclear leukocytes (PMNs). Furthermore, neutrophils exposed to K. pneumoniae secreted enhanced amounts of CXCL8, IL-1&beta, and TNF-&alpha, which were differentially regulated following DMT pretreatment. Altogether, these findings suggest that DMTs may increase the susceptibility of MS patients to microbial infections, in part, through inhibition of neutrophil functions. In light of these data, we recommend that the design of personalized therapies for RRMS patients should take into account not just the mechanism of action of the chosen DMT but also the potential risk of infection associated with the administration of such therapeutic compounds to this highly vulnerable population.

A coating that was made of peppermint essential oil was obtained on different metal substrates: Ti6Al4V alloy (mechanically polished and chemically etched) and 316L stainless steel (mechanically polished and mechanically ground). The final aim is to get a multifunctional (chemical and mechanical) protection of metal surfaces in contact with water media. The coatings were characterized by means of fluorescence microscopy, contact angle measurements, and Fourier Transformed Infrared spectroscopy (FTIR) spectroscopy. The chemical stability of the coatings was tested by means of soaking in water for different times (up to seven days) and washing with different alkaline or acidic solutions. The mechanical adhesion of the coating was tested by tape adhesion test (before and after soaking) and scratch tests to verify whether it has protection ability with respect to the metal substrate. All of the performed characterizations show that the coatings are chemically stable on all of the substrates and are nor dissolved or removed by water during soaking or by alkaline solutions during washing. The adhesion is high and classified as 4B or 5B (on the chemically etched or mechanically ground substrates) according to ASTM D3359-97, depending on the substrate roughness, both before and after soaking. In the case of scratch test (up to 10 N), the coating is not removed and it has a protection action that is able to avoid the surface damage, even if the substrate has a plastic deformation.

In this work, dense, porous, and, for the first time, functionally-graded bi-layer scaffolds with a cylindrical geometry were produced from a commercially available hydroxyapatite powder using the robocasting technique. The bi-layer scaffolds were made of a dense core part attached to a surrounding porous part. Subsequently, these bi-layer robocast scaffolds were joined with an outer shell of an antibacterial porous polymer layer fabricated by solvent casting/salt leaching techniques, leading to hybrid ceramic-polymer scaffolds. The antibacterial functionality was achieved through the addition of silver ions to the polymer layer. All the robocast samples, including the bi-layer ones, were first characterized through scanning electron microscopy observations, mechanical characterization in compression and preliminary bioactivity tests. Then, the hybrid bi-layer ceramic-polymer scaffolds were characterized through antimicrobial tests. After sintering at 1300 &deg, C for 3 h, the compressive strengths of the structures were found to be equal to 29 &plusmn, 4 MPa for dense samples and 7 &plusmn, 4 MPa for lattice structures with a porosity of 34.1%. Bioactivity tests performed at 37 &deg, C for 4 weeks showed that the precipitated layer on the robocast samples contained octacalcium phosphate. Finally, it was evidenced that the hybrid structure was effective in releasing antibacterial Ag+ ions to the surrounding medium showing its potential efficiency in limiting Staphylococcus aureus proliferation during surgery.

Biomolecules and extracts from natural products are gaining increasing interest due to their beneficial properties for human health, low toxicity, environmental compatibility and sustainability. In this work, keratin, chitosan and peppermint essential oil have been used for the preparation of coatings on titanium substrates for biomedical implants or devices. All these coatings were obtained from local natural products or byproducts: keratin from discarded wool, chitosan from shrimps shells and peppermint essential oils from a local production. This approach supports a sustainable use of the resources and the sustainment of local economies with transformation of byproducts in high added values products. Keratin was chosen for its ability to stimulate soft tissue adhesion and to be easily doped with metal ions in order to confer even antibacterial activity. Keratin coatings were realized as electrospun oriented/random submicrometric fibres or continuous films. Chitosan was selected for its anti-inflammatory and antibacterial properties. Continuous coatings were obtained with different grafting strategies (direct grafting, tresyl chloride activation or polydopamine addition). Peppermint essential oil was chosen for its antibacterial activity and used for the obtainment of continuous coatings based on the self polymerizing ability of terpenes. The coatings were characterized by means of SEM-EDS, FTIR, zeta potential, wettability, tape and scratch tests, cell and bacteria cultures. Coatings were successfully obtained for all the considered natural substances. Good adhesion to titanium substrates was reached through the optimization of the surface preparation and grafting process. All the coatings were chemically stable in water and the continuous coating were mechanically resistant and protective for the metallic substrate. The keratin coatings were hydrophilic while mint oil and chitosan coatings were hydrophobic. At physiological pH, keratin and mint oil coatings were negatively charged while chitosan ones were positively charged. The oriented keratin fibres were able to drive fibroblast alignment. Ag-doped keratin fibres and mint coating showed antibacterial properties.

Prosthetic joint infection diagnosis is often difficult since biofilm-embedded microorganisms attach well to the prosthetic surfaces and resist their detection by conventional methods. DL-dithiothreitol has been described as a valid method for biofilm detachment on orthopedic devices. We report the case of an occasional detection of Listeria monocytogenes in a non immuno-compromised patient with a preoperative diagnosis of aseptic loosening. The infection diagnosis due to such rare bacteria was made postoperatively, thanks to a DL-dithiothreitol-based device. This may be considered a feasible approach for the microbiological analysis of prosthetic joint infection, considering that a prompt diagnosis of such biofilm-associated infections could bring some advantages, such as an early and appropriate antibiotic therapy administration and a reduction of undiagnosed infections.

The final goal of this research is to produce a modified titanium surface simultaneously able to induce bone tissue integration in the case of critical bone quality and/or quantity (elderly population) and to prevent infections at the implant site and around it. A metallic antibacterial agent is used against bacteria colonization and biofilm formation, in agreement with the well-established strategy to reduce the use of antibiotics. A surface treatment able to induce the formation of a chemically modified and nanotextured surface oxide layer (with several functionalities suitable for fast and effective osseointegration), as well as the nucleation of silver nanoparticles on the surface was developed. The present paper aims to optimize the chemical process for the preparation of the modified surfaces. This paper describes the selection and dose of the required additives, such as reducing agents and nanoparticle stabilizers, in order to achieve a good control of the series of chemical reactions concurrently occurring during the surface chemical treatment. Surface topography (oxide nanotexture and nanoparticle precipitation) was investigated by means of Field Emission Scanning Electron Microscopy (FESEM) equipped with Energy Dispersive Spectroscopy (EDS) for semi-quantitative evaluation of the chemical composition. Silver release was measured in ultrapure water through a photometric method and surface ability to induce in vitro apatite precipitation was investigated by soaking in Simulated Body Fluid (SBF) followed by FESEM-EDS observations. Finally, a preliminary test of antibacterial activity of the modified titanium surfaces was carried out by means of both inhibition halo and adhesion assays against Staphylococcus aureus.

Despite ongoing global efforts, antimicrobial resistance continues to threaten the treatment of an ever-increasing range of bacterial infections. There is substantial evidence that public education programs that foster microbial literacy amongst young school audiences may improve correct knowledge of specific health issues, such as prevention of microbial infections and responsible use of antibiotics. The aim of the Microbiological@mind project was to engage primary school students with the subject of microbiology, to promote both scientific interest and awareness towards correct behaviors that may ensure a safer lifestyle. Interactive workshops based on a full ''hands-on'' approach were carried out by an expert team from the University of Turin to over 1200 children aged 9-11 years at primary schools in Turin. A questionnaire (pre- and post-activity test) on the main topic (i.e. antibiotics) was used to assess project effectiveness. The workshops provided a useful means to strengthen the understanding of basic microbiology concepts amongst students. Students' baseline knowledge of antibiotics was quite low, as low percentages of correct answers on antibiotic action and use (5.0% and 12.1%, respectively) were found in the pre-activity tests. A significant increase (P

Essential oils (EO) are complex mixtures of natural molecules with a great activity against bacteria, virus and fungi. Despite their wide use in folk medicine, their employment in medicine or in biomedical products is still scarce and there are only few studies in literature. Their antibacterial and anti-adhesive properties are of interest for the development of coatings or functionalization of implant surfaces, but also for non-implantable medical devices, with the advantage of a reduced bacterial contamination, without the risk of developing bacteria resistance. For a first attempt, a peppermint essential oil was used in this research. The aim of the work was to functionalize or to coat the surface of different materials (Ti6Al4V, Steel 316L) with different surface finishing (grinded, polished, and chemically-treated). The obtained samples were characterized by means of XPS, FTIR, Fluorescent microscope observations and tape test. These analyses highlighted the presence of grafted oil biomolecules, or of a coating, on all the substrates after the procedure of functionalization/coating with remarkable chemical stability (during soaking in water or washing with acid or basic solutions) and mechanical adhesion. The samples were also subjected to antibacterial tests selected in order to simulate non-implantable applications: the test showed a reduction of the adherent bacteria and their viability on coated surfaces. In conclusion, the research work shows the great potential of the use of essential oils for surface functionalization or coating of biomaterials to obtain enhanced antibacterial properties: according to the final application, different oils can be selected in order to obtain the desired effects.

Cat scratch disease (CSD) is an infectious disease caused by Bartonella henselae, usually characterized by self-limiting regional lymphadenopathy and fever. Given the low clinical diagnostic sensitivity and specificity of conventional anti-B. henselae indirect immunofluorescence assays (IFAs), real-time polymerase chain reaction (PCR)-based detection of B. henselae is now being proposed as a more sensitive tool to diagnose CSD. Thus, here we have assessed the efficacy of real-time PCR in detecting B. henselae in different specimens from patients with suspected CSD and compared it to that of IFA. From March 2011 to May 2016, at the Microbiology and Virology Unit, Azienda Ospedaliera Universitaria Citta della Salute e della Scienza di Torino, Turin, Italy, 115 clinical specimens (56 aspirated pus, 39 fresh lymph node biopsies, and 20 whole blood samples) and 99 sera from 115 patients with suspected CSD (62 females and 53 males between the ages of 3 months and 68 years) were analyzed by both real-time PCR, used in a qualitative way, and IFA (IgM and IgG) for the presence of B. henselae. For 16 patients, serological results were not available due to a clinical decision not to request the test. B. henselae DNA positivity was detected by real-time PCR in 37.39% of patients, while 62.61% of them were negative. Thus, patients were divided into two groups: real-time PCR+ (n = 43) and real-time PCR- (n = 72). Real-time PCR screening of whole blood, biopsies, and aspirated pus revealed B. henselae positivity in 40%, 38.46%, and 35.71% of patients, respectively. When we analyzed samples by IFA, we found the presence of B. henselae in 28 out of 99 (28.28%) patients, of which 11 (11.11%) belonged to the real-time PCR+ group and 17 (17.17%) to the real-time PCR- group. Among the 71 seronegative subjects, 16 (16.16%) were found positive for B. henselae by real-time PCR. Thus, by combining the results of both assays, we were able to increase the percentage of B. henselae positive specimens from 27.27% (real-time PCR) or 28.28% (IFA) to 44.44% (real-time PCR+IFA). Altogether, these findings indicate that the early detection of B. henselae in patients with suspicious CSD through combined real-time PCR and serological analyses can lead to a more accurate diagnosis of CSD, thereby allowing prompt and appropriate disease management.

Lactobacilli have the potential to act as reservoirs of antibiotic resistance genes similar to those found in human pathogens, with the risk of transferring these genes to many pathogenic bacteria. In this study, we investigated the role of human polymorphonuclear cells (PMNs) against Lactobacillus spp. both resistant and susceptible to ciprofloxacin (a fluoroquinolone) and the effect of ciprofloxacin on the interaction between PMNs and three Lactobacillus spp. with different patterns of susceptibility to this drug. Hence, the primary functions of PMNs, such as phagocytosis and bacterial intracellular killing, against lactobacilli were investigated. The rate of PMN phagocytosis was high for ciprofloxacin-sensitive and ciprofloxacin-resistant strains. The patterns of intracellular killing of ciprofloxacin-sensitive and ciprofloxacin-resistant strains by PMNs underline that PMNs alone were able to kill lactobacilli. The addition of ciprofloxacin to PMNs did not result in a significant increase in the bacterial uptake by phagocytes. On the contrary, ciprofloxacin had a marked effect on PMN intracellular killing, resulting in increased numbers of killed ciprofloxacin-sensitive bacteria in comparison with antibiotic-free controls. Our data show that by itself, the profile of antibiotic resistance does not constitute an intrinsic factor of greater or lesser pathogenicity toward the host. The ability of PMNs to kill a diverse array of bacterial pathogens is essential for human innate host defense, primarily in immunocompromised patients.

Preoperative skin preparation plays a major role in preventing postoperative infections. This study aims to compare a single skin preparation (povidone iodine) with a double skin preparation (chlorhexidine gluconate followed by povidone iodine). Forty patients affected by proximal humeral fracture were included in the study. The day of surgery the two skin preparation strategies were performed in the same shoulder, divided into two areas, at the level of the deltopectoral approach. Skin swabs were collected from each area and subjected to microbiological analysis. Both skin preparations significantly reduced the positive culture rate. Coagulase-negative staphylococci (CoNS) dropped from 92.5% to 40% and to 7.5% after the single and double skin preparation (p Propionibacterium acnes and Staphylococcus aureus, respectively, with no difference between the two preparations. The double skin preparation had a more significant effect on bacterial load against CoNS compared to the single skin preparation (p versus p= 0.015). In conclusion, both the approaches reduced S. aureus and P. acnes skin load, whereas the double skin preparation is more effective than the single one against CoNS. In light of our findings, preoperative strategies able to reduce bacterial load could potentially increase the final efficacy of perioperative traditional skin preparations.

Postoperative infection is a severe complication after proximal humeral fracture surgical treatment. The aim of this study was to determine if the surgical delay could modify the number and type of bacteria on the surgical site. A two stages study was set up. In the first stage the effect of delay was simulated in 20 patients affected by proximal humeral fracture treated conservatively. In a second stage, the effect of delay was measured in 20 patients that underwent surgery. In stage 1, three skin culture swabs were taken in correspondence of the deltopectoral approach, the day of the fracture (day 0), the day after (day 1), and five days after fracture (day 5). In stage 2, skin swab cultures were taken the day of trauma and immediately before surgery and cultured on various media suitable for aerobic and anaerobic bacteria. The number of bacteria increased over the course of the study, from day 0 to day 5, both considering the total number of colony-forming units and individual species of pathogen bacteria. The second stage of the study confirmed these data. An increasing number of bacteria was observed in patients that underwent surgery later than 2 days from trauma. The delay of surgery increased bacterial colonization of the skin in the deltopectoral approach area including common pathogenic bacteria such as Staphylococcus aureus, coagulase-negative staphylococci and Propionibacterium acnes. This might justify the correlation between delay to surgery and risk of infection. © 2015 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 34:942-948, 2016.

Background The rate of acute infection after surgery for proximal humeral fractures is not known. The aims of this study were to report the incidence and to analyze the risk factors for infection after proximal humeral fracture treatment. Materials and methods We report a retrospective multicenter study of 452 proximal humeral fractures. Data were modeled by use of univariate and/or linear regression analyses to determine the odds ratio (OR). A logistic regression analysis was used to check for demographic and other characteristics with the potential to confound a true association between risk factors and infection. Results The mean age was 62.1 years, and 314 patients were female patients. Of the patients, 18 (4%) had an acute infection. The factors that correlated with infection were length of surgery (OR, 1.009; P = .05), preoperative skin preparation with chlorhexidine gluconate (OR, 0.13; P = .008), and prophylactic antibiotic (OR, 10.73; P = .03). The delay to surgery was close to achieving significance (OR, 1.71; P = .06). Conclusion This study suggests that washing the shoulder with chlorhexidine gluconate and avoiding the use of first-generation cephalosporin in favor of more effective prophylactic therapy are effective at reducing the risk of infection after treatment for proximal humeral fractures.

Essential oils are effective as alternative biocide molecules, but they are currently not used against bacterial contamination of surfaces for biomedical, industrial or everyday life applications. In this work, the grafting of peppermint oil to a chemically-treated titanium alloy is explored as a coating or through functionalization (soaking in an ethanol solution of the oil); a procedure for a proper characterization of this type of materials is here suggested. A homogeneous and continuous coating is obtained by polymerization of the oil on the titanium surface, as shown by fluorescence observation. It contains a prevalence of oxygenated compounds (gas-chromatographic, XPS and FTIR analysis), has a hydrophobic behavior (contact angle test and zeta potential titration) and shows strong adhesion to the substrate (tape test). On the functionalized samples, the presence of non-oxygenated grafted compounds was detected (gas-chromatographic, XPS analysis) without the formation of a coating (fluorescent observation). The characteristics of the substrate combined to the selected functionalization procedure are selective towards grafting of specific compounds even if they are minority fractions in the source peppermint oil. The coating has a bacteriostatic effect on adherent bacteria, which is lower on the functionalized samples.

Aim: We evaluated the potential impact of caspofungin (CAS) on the functional activities of polymorphonuclear leukocytes (PMNs) from hemodialyzed patients (HDs) and renal transplant recipients (RTRs) against a multidrug-resistant clinical strain of Candida glabrata compared with those of PMNs from healthy subjects (HSs). Materials & methods: Effects of CAS on PMN phagocytosis and intracellular killing towards multidrug-resistant C. glabrata were evaluated in 66 HDs, 54 RTRs and 30 HSs in the absence and presence of CAS at MIC and sub-MICs. Results: When HD PMNs and RTR PMNs were exposed to both MICs and sub-MICs of CAS, their fungicidal activity against the multidrug-resistant C. glabrata strain was significantly higher than that of drug-free controls, with survival index values that overlapped with those achieved by HS PMNs. Conclusion: The obtained results underline the role of CAS in the restoration of the impaired PMN functions in HDs and RTRs. CAS might still constitute an effective therapeutic option for the treatment of invasive fungal infections caused by multidrug-resistant C. glabrata in patients with altered phagocyte-dependent innate immunity.

Vancomycin (Vm) currently represents the gold standard against methicillin-resistant Staphylococcus aureus (MRSA) infections. However, it is associated with low oral bioavailability, formulation stability issues, and severe side effects upon systemic administration. These drawbacks could be overcome by Vm topical administration if properly encapsulated in a nanocarrier. Intriguingly, nanobubbles (NBs) are responsive to physical external stimuli such as ultrasound (US), promoting drug delivery. In this work, perfluoropentane (PFP)-cored NBs were loaded with Vm by coupling to the outer dextran sulfate shell. Vm-loaded NBs (VmLNBs) displayed ∼300nm sizes, anionic surfaces and good drug encapsulation efficiency. In vitro, VmLNBs showed prolonged drug release kinetics, not accompanied by cytotoxicity on human keratinocytes. Interestingly, VmLNBs were generally more effective than Vm alone in MRSA killing, with VmLNB antibacterial activity being more sustained over time as a result of prolonged drug release profile. Besides, VmLNBs were not internalized by staphylococci, opposite to Vm solution. Further US association promoted drug delivery from VmLNBs through an in vitro model of porcine skin. Taken together, these results support the hypothesis that proper Vm encapsulation in US-responsive NBs might be a promising strategy for the topical treatment of MRSA wound infections.

Background The management of Candida infections faces many problems, such as a limited number of antifungal drugs, toxicity, resistance of Candida to commonly antifungal drugs, relapse of Candida infections, and the high cost of antifungal drugs. Though azole antifungal agents and derivatives continue to dominate as drugs of choice against Candida infections, there are many available data referring to the anticandidal activity of essential oils. Since we have previous observed a good antimicrobial activity of some essential oils against filamentous fungi, the aim of this study was to extend the research to evaluate the activity of the same oils on Candida albicans, C.glabrata and C.tropicalis clinical strains, as well as the effects of related components. Essential oils selection was based both on ethnomedicinal use and on proved antibacterial and/or antifungal activity of some of these oils. Fluconazole and voriconazole were used as reference drugs. Methods The minimum inhibitory concentration (MIC) and the minimal fungicidal concentration (MFC) of essential oils (thyme red, fennel, clove, pine, sage, lemon balm, and lavender) and their major components were investigated by the broth microdilution method (BM) and the vapour contact assay (VC). Results Using BM, pine oil showed the best activity against all strains tested, though C.albicans was more susceptible than C.glabrata and C.tropicalis (MIC50-MIC90 = 0.06 %, v/v). On the contrary, sage oil displayed a weak activity (MIC50-MIC90 = 1 %, v/v). Thyme red oil (MIC50-MIC90 ≤ 0.0038 %, v/v for C.albicans and C.tropicalis, and 0.0078

The purpose of this investigation was to evaluate intracanal bacterial reduction by cryotreatment using a dental instrument equipped with a duct and connected to a cryogenic fluid source. A total of 86 roots were infected with Enterococcus faecalis and incubated. After incubation, the contaminated roots were divided into three study groups: 35 roots irrigated with 2 ml of a 5% sodium hypochlorite (NaOCl) solution, 35 roots irrigated with 2 ml of a 5% NaOCl solution and further treated with cryo and 10 roots irrigated with 2 ml of saline solution, plus positive and negative controls. Subsequent to each irrigation treatment, the residual bacterial colonies were counted. The use of cryo-instrumentation in association with NaOCl irrigation significantly reduced the number of Ent. faecalis (P < 0·01) in the root canal compared with controls. The interesting potential of cryotreatment should be further investigated through clinical studies aimed to establish a correct irrigation protocol. Within the limits of the study, the cryotreatment seems to have a greater effect on the reduction in bacteria compared to a standard NaOCl irrigation.