Search

In this paper, an inductively coupled capacitively loaded ring resonator (IC-CLRR)-based microwave resonant sensor has been proposed for the accurate identification of any unknown liquid sample and its permittivity estimation. The key element of this work is the sensor's wide range capability towards the non-invasive testing of liquids covering a wide dielectric range of liquid samples, i.e., εr = 2 to 80. The proposed microwave sensor is etched over the FR-4 substrate and is excited by the microstrip line through inductive coupling. The placement of an unknown liquid sample in close proximity to the sensor alters its natural resonant frequency due to a change in effective inductance and capacitance as per the dielectric property of the liquid sample. Further, a mathematical formulation using curve fitting has also been derived. The measurement results show a good accuracy in estimating the permittivity and, thus, the unknown liquid identification capability of the designed sensor with a very low error (nearly 5%). This sensor design is simple to fabricate, cost-friendly, and small in size. [ABSTRACT FROM AUTHOR]

Traditional freshwater sources have been over-abstracted in the worldwide crisis of water scarcity. Effluents have extremely high amounts of Zn2+ and Pb2+, according to an investigation of wastewater samples taken from several industrial zones. However, these heavy metals are among the most harmful to both humans and wildlife that are currently known. Streptomyces sp. is utilized in this study as a biosorbent to biosorb Zn2+ and Pb2+ from single and binary aqueous solutions. Several factors, such as biomass concentration (0.25–4 g), metal solution concentration (5–50 mg L−1), solution pH (2–5), and contact time were standardized. Streptomyces sp. biomass was able to extract 93% Pb2+ and 91% Zn2+ from a single and 95% Pb2+ and 97% Zn2+ from a binary metal aqueous solution containing 25 mg L−1 and pH 4. The highest adsorption capacity in both single and binary sorption experiments was determined to be shared by Zn2+ and Pb2+. The biosorbent's metal adsorption increased from 0.48 to 4.56 mg g−1 for Pb2+ and from 0.21 mg g−1 to 4.65 mg g−1 for Zn2+ when the metals were present singly, and from 0.44 to 4.18 mg g−1 for Pb2+ and from 0.41 mg g−1 to 5.67 mg g−1 for Zn2+ when the metals were present in binary form. The amount of metal ions was raised from 5 to 50 mg L−1. Correlation coefficient (R2) values indicate that the adsorption pattern for Zn2+ and Pb2+ followed Freundlich isotherm R2 > 0.9543 for single and 0.9582 for binary sorption system. In order to remove Zn2+ and Pb2+ from an aqueous solution, Streptomyces sp. is a potential and different source of adsorbents. [ABSTRACT FROM AUTHOR]

Most of the dyes are toxic and non-biodegradable in textile industry wastewaters. Therefore, removal of textile dye using agriculture waste becomes crucial for the environment. This can be accomplished by the biosorption process which is the passive uptake of pollutants by agricultural waste. In this study, Response Surface Methodology (RSM), Artificial Neural Network (ANN) and Adaptive Neuro-Fuzzy Inference System (ANFIS) were used to obtain optimum conditions for Methylene Blue (MB) removal using sugarcane bagasse and peanut hulls as low-cost agricultural waste. The experimental design was carried out to study the effect of temperature, pH, biosorbent amount and dye concentration. The maximum MB dye removal considering the effect of total dissolved solids from aqueous solutions of 74.49% and 67.99% by sugarcane bagasse and peanut hulls, respectively. The models specify that they could predict biosorption with high accuracy having R2-value above 0.9. Statistical studies for RSM, ANFIS and ANN models were compared. Further, the models were optimized for maximum dye removal was at 1.21 g of biosorbent, pH 5.24, 31.24 mg/L MB concentration, 22.29°C of dye solution using sugarcane bagasse and at 1.37 g of biosorbent, pH 5.77, 36.7 mg/L MB concentration, 26.8°C of dye solution using peanut hulls. Additionally, Fourier Transform Infra-Red (FTIR) spectral analysis was also carried out to confirm the biosorption. [ABSTRACT FROM AUTHOR]

Penoxsulam is new triazolopyrimidine sulfonamide herbicides; it is used to control annual grass and weeds in rice but it disrupts internally growing weeds in rice and inhibits the acetolactate synthase which is commonly found in plants. Sulfonamides drugs may also implicate in any allergic reactions in the body. In agricultural field farmers deals with various herbicides. Skin is the vital path of enter into the body for vulnerability situations and due to large surface area lot of chemicals infilterate the skin can metabolize foreign compound. As Rat and Human both have similar body plans and organs, therefore rat is used as the best model for biological scanning. The present study was conducted to determine the effect of repeated exposure of Penoxsulam herbicide for 28 days by topical route on the physiology of Wistar rats. This study evaluates that there was no clinical signs, skin reactions (Draize method) was noticed and no significant changes was observed in Bodyweight, Haematology, Biochemistry and Histopathology in treated groups after compared with control group of animals. Therefore, Penoxsulam at 1000 mg/kg body weight did not showed any adverse effect on skin to treated rats during the experimentation period. [ABSTRACT FROM AUTHOR]

Desalination of brackish groundwater has emerged as a major option to overcome water scarcity, since quantity and quality of surface water is not appropriate for the continuously growing water demand of two-thirds of the world’s population. Photovoltaic (PV) solar energy powered reverse osmosis (RO) system can be the best option in secluded and isolated areas of the world that are suffering from a shortage of electricity energy and drinking water. This technique is likely to be the lowest energy demanding technology among other desalination techniques. Further, adopting measures like energy recovery devices, hybrid pretreatment process, and battery-less system reduces overall cost of the system. But, the capital cost of the system is still too high to support this technology competitively in the market. In the present paper, a review of the PV-RO systems employed for drinking water treatment in non-electrified rural areas of developing countries has been provided. The status of development in the last few years, along with the attempts towards finding rational solutions for cost reduction are also summarized. [ABSTRACT FROM AUTHOR]