Search

Sodium-ion batteries (SIBs) have aroused great attention because of the low cost and environmental benignity of sodium resources. However, practical applications of SIBs are plagued by the sluggish kinetics of sodium ions with large size in the host structure, which results in poor rate performance and rapid capacity decline. Herein, a self-templated approach was developed to synthesize MoS2 /Cu2 Se nanosheets with improved interfacial electron- and ion-transfer kinetics. The MoS2 /Cu2 Se nanosheets provided superior sodium storage performance, delivering 139 mAh g-1 at a high current density of 100 A g-1 and 222 mAh g-1 after 14000 cycles (at 20 A g-1 ). The outstanding electrochemical performance was attributed to the synergetic engineering of interface and structure, which could enhance the electrochemical kinetics and gave excellent mechanical properties to deal with the volume expansion phenomenon. Combined with a high-voltage cathode, the full battery demonstrated a high energy density of 152 Wh kg-1 at a power density of 420 W kg-1 , which opens a new avenue for the development of high-performance SIBs.

Cofactor regeneration is an important method to avoid the consumption of large quantities of oxidized cofactor NAD+ in enzyme-catalyzed reactions. Herein, glycerol dehydrogenase (GDH) and NADH oxidase preparations by aggregating enzymes with ammonium sulphate followed by cross-linking formed aggregates for effective regeneration of NAD+. After optimization, the activity of combi-CLEAs and separate CLEAs mixtures were 950 and 580 U/g, respectively. And the catalytic stability of combi-CLEAs against pH and temperature was superior to the free enzyme mixture. After ten cycles of reuse, the catalytic efficiency could still retain 63.3% of its initial activity, indicating that the constructed combi-CLEAs system had excellent reusability. Also, the conversion of glycerol to 1,3-dihydroxyacetone (DHA) was improved by the constructed NAD+ regeneration system, resulting in 4.6%, which was 2.5 times of the free enzyme system. Thus, wide applications of this co-immobilization method in the production of various chiral chemicals could be expected in the industry for its high efficiency at a low cost.

Sodium-ion batteries (SIBs) have aroused great attention because of the low cost and environmental benignity of sodium resources. However, practical applications of SIBs are plagued by the sluggish kinetics of sodium ions with large size in the host structure, which results in poor rate performance and rapid capacity decline. Herein, a self-templated approach was developed to synthesize MoS

Design and synthesis of non-noble metal electrocatalysts with high activity and durability for the electrolysis of water is of great significance for energy conversion and storage. In this work, we prepared a series of Fe-doped MoS2 nanomaterials by simple one-pot solvothermal reactions of (NH4)2MoS4 with FeCl3·6H2O. An optimized working electrode of Fe-MoS2-5 displayed high hydrogen evolution reaction (HER) activity with a relatively small overpotential of 173 mV to achieve a current density of 10 mA cm-2 in 0.5 M H2SO4, along with no significant change in catalytic performance even after 1000 cyclic voltammetry (CV) cycles. Fe-MoS2 nanoparticles on nickel foam (NF; denoted as Fe-MoS2/NF) exhibited an overpotential of 230 mV at 20 mA cm-2 for the oxygen evolution reaction (OER) and 153 mV at 10 mA cm-2 for the HER in 1.0 M KOH electrolyte. Fe-MoS2/NF was stable for more than 140 h under these conditions. Furthermore, the two electrode system of Fe-MoS2/NF (anode)//Fe-MoS2/NF (cathode) electrodes demonstrated excellent electrocatalytic activity toward overall water splitting with a low potential of 1.52 V at 10 mA cm-2 in 1.0 M KOH electrolyte.

Enzymatic NADP+ regeneration is a promising approach to produce valuable chemicals under economic conditions. Among all the enzymatic routes, using water-forming NADH oxidase is an ideal one because there is no by-product. However, most NADH oxidases have a low specific activity to NADPH. In this work, a thermostable NADH oxidase from Lactobacillus rhamnosus (LrNox) was rationally engineered to switch its specificity from NADH to NADPH. The results show that mutants D177A, G178R, D177A/G178R, D177A/G178R/L179S improved the NADPH activity by a factor of 4–6. The highest NADPH catalytic efficiency (Kcat/Km 223.71 S−1 μm−1, 47.6-fold higher than wild-type LrNox) and 51% of NADH activity retention were achieved by replacing the single amino acid Leu179 for serine (L179S) in LrNox. Modeling of L179S-NADPH complex reveals that the phosphate group of NADPH interacts with the hydroxyl of Ser179 with a strong hydrogen bond and several shorter hydrogen bonds with the amino group of Lys185 could stabilize the binding of NADPH in the L179S mutant. This work provides an efficient method for converting NAD(P)H specificity and shows that L179S mutant is a potential and efficient auxiliary enzyme for NADP+ regeneration.

Cysteine, a critical residue for catalytic process but also vulnerable to oxidative damage, was conventionally expressed as a buried catalytic site in most redox enzymes. In the present work, specific surface-exposed sites of a NADH oxidase from Lactobacillus rhamnosus (LrNox) were selected and mutated to cysteine to investigate its effects on catalytic function because LrNox has a buried catalytic cysteine but no surface-exposed one. The results showed that exception of the sites on dimer interface, the activities of LrNox mutants were improved to vary degrees when the polar uncharged and alanine residues were mutated to cysteine. But the cysteine mutations of polar charged and nonpolar residues except alanine showed obvious decline in catalytic activity. Substituting of Ala85 and Thr96 with other residues suggested that the cysteine mutation showed the highest activity. Structural analysis suggested that even a single cysteine mutation on the specific non-conserved surface area of LrNox could induce changes on the conformation of catalytic cysteine and lower the activation free energy to improve the catalytic activity.

Environmental DNA (eDNA) metabarcoding provides a fast and efficient way to obtain biodiversity information that has been widely used in aquatic biodiversity monitoring and assessment. To facilitate the application of eDNA metabarcoding in China, the accuracy of metabarcoding data needs to be further assessed. Here, the eukaryotic phytoplankton in Dianchi Lake and the northern portion of Fuxian Lake were examined. The effect of sequencing depth on species diversity was also explored, and accuracy was evaluated by comparing the taxon overlap and coefficient of variation (CV) of the

The development of metal–organic frameworks (MOFs) as high-efficiency electrocatalysts for water splitting has attracted special attention due to their unique structural features including high porosity, large surface areas, high concentrations of active sites, uniform pore sizes and shapes, etc. Most of the related reports focus on the in situ generation of high-efficiency electrocatalysts by annealed MOFs. However, the pyrolysis process usually destroys the porous structure of MOFs and reduces the number of active sites due to the absence of organic ligands and agglomeration of metal centers. In this work, we prepared unique NiCo-MOF hollow nanospheres (NiCo-MOF HNSs) by a solvothermal method and further fabricated Fe-doped NiCo-MOF HNSs (Fe@NiCo-MOF HNSs) by a simple impregnation-drying method. Significant enhancement of electrocatalytic activity of Fe@NiCo-MOF HNSs was witnessed because of the doped Fe. Compared with the parent NiCo-MOF HNSs, the optimized Fe@NiCo-MOF HNSs exhibited a lower overpotential of 244 mV at 10 mA·cm−2 with a smaller Tafel slope of 48.61 mV·dec−1, which was lowered by ca. 90 mV due to the influence of Fe doping on the electronic structure of the active centers of Ni and Co. The above materials also displayed excellent stability without obvious activity decay for at least 16 hours. These findings present a new entry in the design and fabrication of high-efficiency MOF-based electrocatalysts for energy conversion.

Pristine metal-organic frameworks (MOFs) have received much attention in recent years due to their high specific surface areas, large porosity, excellent pore size distributions, flexible structure, and remarkable catalytic properties. The design of functional MOFs that can function as efficient HER and OER catalysts is significant in solving the energy crisis but remains a big challenge. Tri-metallic metal-organic frameworks show a good application prospect in water oxidation. In this review, we are going to focus on the latest progress and future trends in the development of pristine trimetallic MOFs with respect to the OER. The synergistic effect between multi-metal active sites is effective at improving the intrinsic activity of MOFs toward the OER. By summarizing the synthesis method of tri-metallic MOFs and observing their performance toward the oxygen evolution reaction, we hope that this review will trigger new developments in coordination chemistry, electrochemistry, nanomaterials and energy materials.

As an important two-dimensional material, layered double hydroxides (LDHs) show considerable potential in electrocatalytic reactions. However, the great thickness of the bulk LDH materials significantly limits their catalytic activity. In this work, we report ultrathin NiFe-LDH nanosheets with sulfate interlayer anions (Ni6Fe2(SO4)(OH)16·7H2O) (U-LDH(SO42−)), which can be synthesized in gram-scale by a simple solvothermal method. The U-LDH(SO42−) shows excellent stability and great electrocatalytic performance in OER with a current density of 10 mA cm−2 at a low overpotential of 212 mV and a small Tafel slope of 65.2 mV dec−1, exhibiting its great potential for a highly efficient OER electrocatalyst.

A novel nicotinamide adenine dinucleotide (NADH) oxidase from Streptococcus mutans ATCC 25175 (SmNox) was cloned and overexpressed in Escherichia coli BL21 (DE3). Sequence analysis revealed an open reading frame of 1374bp, capable of encoding a polypeptide of 457 amino acid residues. The molecular mass of the purified SmNox was estimated to be ∼49.9kDa by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The purified SmNox had the highest specific activity of 281.2U·mg-1 at optimal pH and temperature of 7.0 and 35°C, with a Km of 57.7μM and a Vmax of 154.3U·mg-1. The good stability at room temperature was observed. Homology modeling and substrate docking were performed to evaluate the catalytic characteristics. The results indicated that Nicotinamide ring of NADH extends vertically toward to re-face of coenzyme (FAD), and the specific conformation of NADH suggested that the charges transfer in SmNox complex could be easier than in its homologous enzyme (LbNox) under alkaline environment. The characterization of the SmNox indicated it has potential in industrial regeneration of coenzyme NAD+ for coupling with dehydrogenases.

Cuboidal [Ni4O4] clusters supported by a pyridine alkoxide ligand have been developed. One of these clusters was selected as a precursor for carbon-hosted Ni nanoparticles (NiNPs/C) which were efficient catalysts for the conversion of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) at room temperature.

The development of bifunctional non-noble metal electrocatalysts demonstrating high activity and stability for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is of great significance for renewable and clean energy. In this work, we report hierarchically structured integrated Fe-MoS2/Ni3S2/NF (NF = nickel foam) materials prepared by a facile in situ solvothermal method, and among them, the Fe-doped MoS2 was assembled into spine-like nanorods. The optimized electrocatalyst (denoted as Fe-MoS2/Ni3S2/NF-2) demonstrated excellent activity and durability for performing the HER and OER in an alkaline electrolyte (pH = 14) with low overpotentials of 130.6 mV and 256 mV (vs. RHE) at a current density of 10 mA cm-2, as well as no significant loss in catalytic performance even after 2000 cyclic voltammetry (CV) cycles. An outstanding durability of 180 h could be achieved for OER. The overall water splitting made up of the two-electrode system with Fe-MoS2/Ni3S2/NF-2 as both the anode and the cathode required a voltage of only 1.61 V to drive a current density of 10 mA cm-2 along with an outstanding long-term stability of 20 h, displaying its great potential for application in water splitting. The effective construction of multi-component synergistic structures shows a good pathway for high-performance electrocatalysis and energy storage.

Design and synthesis of non-noble metal electrocatalysts with high activity and durability for the electrolysis of water is of great significance for energy conversion and storage. In this work, we prepared a series of Fe-doped MoS

The development of bifunctional non-noble metal electrocatalysts demonstrating high activity and stability for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is of great significance for renewable and clean energy. In this work, we report hierarchically structured integrated Fe-MoS

Cofactor regeneration is an important method to avoid the consumption of large quantities of oxidized cofactor NAD

Ultrathin metal-organic framework (MOF) nanosheets (NSs) offer potential for many applications, but the synthetic strategies are largely limited to top-down, low-yield exfoliation methods. Herein, Ni-M-MOF (M=Fe, Al, Co, Mn, Zn, and Cd) NSs are reported with a thickness of only several atomic layers, prepared by a large-scale, bottom-up solvothermal method. The solvent mixture of N,N-dimethylacetamide and water plays key role in controlling the formation of these two-dimensional MOF NSs. The MOF NSs can be directly used as efficient electrocatalysts for the oxygen evolution reaction, in which the Ni-Fe-MOF NSs deliver a current density of 10 mA cm-2 at a low overpotential of 221 mV with a small Tafel slope of 56.0 mV dec-1 , and exhibit excellent stability for at least 20 h without obvious activity decay. Density functional theory calculations on the energy barriers for OER occurring at different metal sites confirm that Fe is the active site for OER at Ni-Fe-MOF NSs.

In this work, we fabricate new yolk–shell Pd@ZIF-8 (ZIF = zeolitic imidazolate framework) nanoparticles (NPs) through reactions of the preformed core–shell Pd@ZnO NPs with 2-methylimidazole under mild conditions. In this method, ZnO is used as the self-template and the Zn2+ source for the formation of the ZIF-8 shell. The morphology, composition and structure of the as-prepared yolk–shell nanomaterial are characterized by scanning electron microscopy, transmission electron microscopy, high resolution transmission electron microscopy, powder X-ray diffraction, energy dispersive X-ray spectroscopy, and inductively coupled plasma atomic emission spectroscopy. The formation of this well-defined yolk–shell nanostructure is highly dependent on the solvent system and reaction time. This nanomaterial can be employed as an excellent heterogeneous catalyst for the liquid-phase hydrogenation of olefins with high size-selectivity at room temperature, which is mainly due to the inherent porous structure of the outer ZIF-8 shell along with the enclosed Pd NPs. The nanocatalyst system can be recycled at least three times without any evident loss of the catalytic efficiency.

Enzyme-catalyzed cofactor regeneration is a significant approach to avoid large quantities consumption of oxidized cofactor, which is vital in a variety of bioconversion reactions. NADH: FMN oxidoreductase is an ideal regenerating enzyme because innocuous molecular oxygen is required as an oxidant. But the by-product H2O2 limits its further applications at the industrial scale. Here, novel NADH: FMN oxidoreductase (LrFOR) from Lactobacillus rhamnosus comprised of 1146 bp with a predicted molecular weight of 42 kDa was cloned and overexpressed in Escherichia coli BL21 (DE3). Enzyme assay shows that the purified recombinant LrFOR has both the NADPH and NADH oxidation activity. Biochemical characterizations suggested that LrFOR exhibits the specific activity of 39.8 U·mg−1 with the optimal pH and temperature of 5.6 and 35 °C and produces H2O instead of potentially harmful peroxide. To further study its catalytic function, a critical Thr29 residue and its six mutants were investigated. Mutants T29G, T29A, and T29D show notable enhancement in activities compared with the wild type. Molecular docking of NADH into wild type and its mutants reveal that a small size or electronegative of residue in position29 could shorten the distance of NADH and FMN, promoting the electrons transfer and resulting in the increased activity. This work reveals the pivotal role of position 29 in the catalytic function of LrFOR and provides effective catalysts in NAD+ regeneration.

An efficient approach to decarboxylative C3-acylation of benzothiophenes or benzofurans with α-oxocarboxylic acids via palladium-catalyzed C–H bond activation was developed. This method was compatible with a variety of functional groups and provided an attractive route to 3-acylbenzothiophenes and 3-acylbenzofurans in good to high yields.

We report the synthesis of unique Au–Pd bimetallic alloy nanoparticles (NPs) supported on a hollow Cu2O–CuO core–shell heterostructure via the galvanic replacement method, which represents the first example of Au–Pd alloy nanoparticles immobilized on hollow Cu2O@CuO nanocubes. The morphological evolution can be controlled by the reaction time. The morphology, composition, and structure of the as-prepared Cu2O@CuO/(Au–Pd) material are characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), elemental analysis (EDS) and inductively coupled plasma atomic emission spectroscopy (ICP-AES). The size of the Au–Pd bimetallic NPs deposited onto the Cu2O@CuO nanocubes is ca. 15 nm. These bimetallic NPs showed a high catalytic activity towards the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) in water at room temperature. Significantly, the strong synergistic effect between Au and Pd, and the high specific surface area of Cu2O@CuO enhance the catalytic efficiency. The catalytic system can be reused for several cycles without any obvious decay of the catalytic efficiency.

Steeply inclined seam is a seam whose angle of dip ranges from 45° to 90°. Uneven subsidences of Goaf will damage the structure of the buildings on the ground surface, if improper choice and handling of foundation and buildings, part of the building will crack, tilt, until collapse. In this paper, we have a research on the area of goaf of steeply inclined seam, using numerical simulation to theoretically research and predict on the regulations of settlement, horizontal displacement, stress change of ground in goaf from now on to 20 years later. And this provides us theoretical basises and necessary suggestions for the use of ground in goaf and the safety of buildings.

Cuboidal [Ni

In order to calculate the all-time apparent resistivity for large fixed loop more quickly, the transient electromagnetic field analytic expression for lager fixed loop in homogeneous half space is analyzed in this paper. The facts that the curve has a characteristic of translational expansion and contraction with the conductivity, the test point coordinates and observation time are discovered. A new method using translation algorithm to calculate all-time apparent resistivity is proposed for the large fixed loop. A new calculation equation of all-time apparent resistivity for large fixed loop is derived which shows that the method is feasible and effective.

DMF-stabilized Au nanoparticles (NPs) with three different particle sizes were prepared by controlling the reaction temperatures and times. In the absence of any additional ligands, these Au NPs showed high catalytic activity in the Ullmann homocoupling of aryl iodides in DMF. The effects of Au particle size on the coupling reaction were investigated by the use of three Au catalysts with mean particle sizes of ca. 1.0 nm, 2.5 nm, and 5.5 nm, respectively. The catalytic activity of the Au NPs was found to be in the order of Au (2.5 nm)Au (1.0 nm)Au (5.5 nm), indicating that surface Au atoms do not have the same catalytic activity toward such a homocoupling reaction.

An efficient method for synthesis of 1,3-diynes through the CuI/1,10-phenanthroline-catalyzed oxidative decarboxylative homocoupling of aryl pioprolic acids in aqueous DMF has been developed. The catalytic system was suitable for a variety of arylpropiolic acids, and the corresponding 1,3-diynes could be prepared in high yields. The catalytic system was recovered from the organic products by filtration and its aqueous DMF filtrate retained good activity even after at least four cycles of use.

Based on a typical loess landslide of K135+514 ~ +678 section of a Highway in Shaanxi Province, the formation mechanism and the possible failure mode of the loess landslide are analyzed, and the stability of the loess landslide is evaluated. The calculation results show that the landslide is in a stable ~ basically stable state during natural condition and in unstable state after working condition. According to the basis of those analyses, the treating measures of the landslide are put forward. At last after the schemes’ comparison the "anti-slide pile + unloading + slope drainage+ plant greening" comprehensive control scheme is determined, this has certain reference significance for the similar engineering in the future.

This work reported that Suzuki–Miyaura coupling reactions of arylboronic acid with aryl bromide or iodides were mediated by Pd(OAc)2 and 4-(benzylthio)-N,N,N-trimethylbenzenammonium chloride in the presence of Na2CO3 in water under the mild conditions. The corresponding Suzuki–Miyaura coupling products were obtained in good to excellent yields.

An efficient method of ligand-free Cu-catalyzed oxidative decarboxylative homocoupling of aryl propiolic acids was developed. When CuI was employed as the catalyst and I 2 as the oxidant, the decarboxylative homocoupling reaction for C sp –C sp bond formation in DMSO underwent smoothly to afford the corresponding 1,4-disubstituted 1,3-dialkynes in good to excellent yields without any organic ligands. This catalytic system was applicable to aryl propiolic acids bearing different steric, electronic, and functional groups.

The authors wish to make the following corrections to our published paper [...]

Mannose-functionalized magnetic nanoparticles were prepared for the immobilization of Escherichia coli cells harboring the recombinant glycerol dehydrogenase gene. Immobilization of whole E. coli cells on the carrier was carried out through specific binding between mannose on the nanoparticles and the FimH lectin on the E. coli cell surface via hydrogen bonds and hydrophobic interactions. The effects of various factors including cell concentration, pH, temperature, and buffer concentration were investigated. High degrees of immobilization (84%) and recovery of activity (82%) were obtained under the following conditions: cell/support 1.3 mg/mL, immobilization time 2 h, pH 8.0, temperature 4&deg, C, and buffer concentration 50 mM. Compared with the free cells, the thermostability of the immobilized cells was improved 2.56-fold at 37 &deg, C. More than 50% of the initial activity of the immobilized cells remained after 10 cycles. The immobilized cells were evaluated functionally by monitoring the catalytic conversion of glycerol to 1,3-dihydroxyacetone (DHA). After a 12 h reaction, the DHA produced by the immobilized cells was two-fold higher than that produced by the free cells. These results indicate that mannose-functionalized magnetic nanoparticles can be used for the specific recognition of gram-negative bacteria, which gives them great potential in applications such as the preparation of biocatalysts and biosensors and clinical diagnosis.

Hydrothermal reactions of CdSO4 with tetrakis(4-pyridyl)cyclobutane (tpcb) and 1,3-benzenedicarboxylic acid (1,3-H2BDC) or 5-nitro-1,3-benzenedicarboxylic acid (5-NO2-1,3-H2BDC) resulted in the formation of two coordination polymers [Cd(tpcb)0.5(1,3-BDC)]n (1) and {[Cd2(tpcb)(5-NO2-1,3-BDC)2(OH2)2] · 4H2O}n (2), respectively. Compounds 1 and 2 were characterized by elemental analysis, IR, powder X-ray diffraction, and single-crystal X-ray diffraction. 1 and 2 exhibit two different types of two-fold interpenetrating 3D architectures with (66)2(64 · 82) and (52 · 8)(54 · 6∙8)(4 · 53 · 62 · 7 · 82 · 10) Schlafli symbols, respectively. Their thermal and photoluminescent properties were also investigated.

This paper presents an evolutionary way for the robot to plan path. The way is based on the Evolutionary Artificial Potential Field approach. APF is an efficient way for a robot to plan its path, and the evolutionary APF can help the robot to jump out of the local minimum point. A matrix is integrated in the new algorithm. The matrix can modify the direction of a robot when the robot is trapped in a local minimum point. The force which has been changed will prompt the robot to escape from the local minimum point. Simulation result shows that the optimized algorithm is an effective way to solve the local minimum problem.

Using Li2O-B2O3-SiO2 (LBS) glass and LiF as a liquid phase sintering additive, the effects of it on the microstructure and properties of 16CaO-9Li2O-12Sm2O3-63TiO2（CLST）ceramics were investigated. The results indicated that the compound sintering aids of LBS glass and LiF reduced the sintering temperature of CLST from 1300 °C to 950°C. Compared with the sample doped single LBS glass, the optimum dielectric properties, Kr=81, Tanδ=0.0073 could be obtained when the CLST ceramic samples doped 3 wt% LBS glass and 0.25 wt% LiF were sintered at 950°C for 3 h.

The Bi1.5ZnNb1.5O7 ( -BZN) ceramics were prepared by combining conventional solid synthesis (CS) and hydrothermal method (HTM). The emphasis was placed on the effects of doping nanopowder synthesized by HTM on the properties of -BZN ceramics. The results show that there is no effect of doping nanopowder on the sintering temperature and phase of -BZN ceramics. Therefore, with the increase of doping nanopowder, the density of ceramics decreases. Doped 10 wt% nanopowder, the ceramic sample sintered at 1000°C exhibits a well-crystalline phase and more excellent dielectric properties than others. At 1MHz, the observed value is about 148 and tan value is less than 3.365×10-4.

The effects of ZnO-Bi2O3-B2O3-SiO2(ZBBS) glass addition on the sintering behavior, crystalline phase, microstructure and dielectric properties of 16CaO-9Li2O-12Sm2O3-63TiO2(CLST) ceramics were investigated. The results show that ZBBS glass can effectively decrease the sintering temperature of CLST ceramics to 1 000 °C by liquid phase sintering. With the increase of ZBBS content, the second phase，Sm2Ti2O7 is found and increase, which causes the dielectric constant and dielectric loss of CLST decrease. The temperature coefficient of the resonance frequency shifts to positive. The optimum dielectric properties of r = 71, Tan = 0.006, TCF= 5×10-6/°C were obtained in 10wt% LBS glass-doped CLST ceramics sintered at 1 000 °C for 3 h.

An efficient approach to decarboxylative C3-acylation of benzothiophenes or benzofurans with α-oxocarboxylic acids via palladium-catalyzed C–H bond activation was developed. This method was compatible with a variety of functional groups and provided an attractive route to 3-acylbenzothiophenes and 3-acylbenzofurans in good to high yields.

An efficient method for synthesis of 1,3-diynes through the CuI/1,10-phenanthroline-catalyzed oxidative decarboxylative homocoupling of aryl pioprolic acids in aqueous DMF has been developed. The catalytic system was suitable for a variety of arylpropiolic acids, and the corresponding 1,3-diynes could be prepared in high yields. The catalytic system was recovered from the organic products by filtration and its aqueous DMF filtrate retained good activity even after at least four cycles of use.

This work reported that Suzuki–Miyaura coupling reactions of arylboronic acid with aryl bromide or iodides were mediated by Pd(OAc)2 and 4-(benzylthio)-N,N,N-trimethylbenzenammonium chloride in the presence of Na2CO3 in water under the mild conditions. The corresponding Suzuki–Miyaura coupling products were obtained in good to excellent yields.

An efficient method of ligand-free Cu-catalyzed oxidative decarboxylative homocoupling of aryl propiolic acids was developed. When CuI was employed as the catalyst and I 2 as the oxidant, the decarboxylative homocoupling reaction for C sp –C sp bond formation in DMSO underwent smoothly to afford the corresponding 1,4-disubstituted 1,3-dialkynes in good to excellent yields without any organic ligands. This catalytic system was applicable to aryl propiolic acids bearing different steric, electronic, and functional groups.