Search

Nickel-based and cobalt-based metal alloys are frequently used in dentistry. The introduction of various elements in the alloy changes its characteristics, and a thorough study of each alloy should be completed to determine its appropriate corrosion resistance and biocompatibility in contact with physiological fluids. There are scarce investigations on these widely used dental alloys in Ringer solution, and findings in this research bring new experimental data and information. The present study evaluated and compared the corrosion behavior of six NiCr- and two CoCr-based dental materials in Ringer solution, using the following techniques: potentiostatic polarization curves (chronoamperometry), microstructural analysis, and EIS (electrochemical impedance spectroscopy). The results obtained in this investigation showed that in the NiCr-based specimens Ni4, Ni5, and Ni6 the stability of the passive layer was destroyed after polarization and a development and growth of stable pits was found in the microstructural analysis after electrochemical treatment. In terms of susceptibility to corrosion, two different groups of specimens were derived from this investigation. A first group which included the two CoCr (Co1 and Co2) and three of the six NiCr alloys studied (Ni1, Ni2, and Ni3). A second group with the other NiCr alloys investigated Ni4, Ni5, and Ni6.

Objectives: Advanced tools and resources are needed to efficiently and sustainably produce food for an increasing world population in the context of variable environmental conditions. The maize genomes to fields (G2F) initiative is a multi-institutional initiative effort that seeks to approach this challenge by developing a flexible and distributed infrastructure addressing emerging problems. G2F has generated large-scale phenotypic, genotypic, and environmental datasets using publicly available inbred lines and hybrids evaluated through a network of collaborators that are part of the G2F's genotype-by-environment (G × E) project. This report covers the public release of datasets for 2014-2017., Data Description: Datasets include inbred genotypic information; phenotypic, climatic, and soil measurements and metadata information for each testing location across years. For a subset of inbreds in 2014 and 2015, yield component phenotypes were quantified by image analysis. Data released are accompanied by README descriptions. For genotypic and phenotypic data, both raw data and a version without outliers are reported. For climatic data, a version calibrated to the nearest airport weather station and a version without outliers are reported. The 2014 and 2015 datasets are updated versions from the previously released files [1] while 2016 and 2017 datasets are newly available to the public.

Objectives: Crop improvement relies on analysis of phenotypic, genotypic, and environmental data. Given large, well-integrated, multi-year datasets, diverse queries can be made: Which lines perform best in hot, dry environments? Which alleles of specific genes are required for optimal performance in each environment? Such datasets also can be leveraged to predict cultivar performance, even in uncharacterized environments. The maize Genomes to Fields (G2F) Initiative is a multi-institutional organization of scientists working to generate and analyze such datasets from existing, publicly available inbred lines and hybrids. G2F's genotype by environment project has released 2014 and 2015 datasets to the public, with 2016 and 2017 collected and soon to be made available., Data Description: Datasets include DNA sequences; traditional phenotype descriptions, as well as detailed ear, cob, and kernel phenotypes quantified by image analysis; weather station measurements; and soil characterizations by site. Data are released as comma separated value spreadsheets accompanied by extensive README text descriptions. For genotypic and phenotypic data, both raw data and a version with outliers removed are reported. For weather data, two versions are reported: a full dataset calibrated against nearby National Weather Service sites and a second calibrated set with outliers and apparent artifacts removed.

The hinge domain encompasses amino acids 51-60 of lactose repressor (LacI) and plays an important role in its regulatory interaction with operator DNA. This segment makes both hinge-DNA and hinge-hinge' contacts that are critical to DNA binding. Furthermore, this small region serves as a central element in communicating the allosteric response to inducer. Introducing a disulfide bond between partner hinges within a dimer via the mutation V52C results in a protein that has increased affinity for O(1) operator DNA compared to wild-type LacI and abolishes allosteric response to inducer [Falcon, C. M., Swint-Kruse, L., and Matthews, K. S. (1997) J. Biol. Chem. 272, 26818]. We have established that this high affinity is maintained for the disulfide-linked protein even when symmetry and half-site spacing within the operator region are altered, whereas binding by the reduced protein, as for wild-type LacI, is severely diminished by these alterations. Interestingly, the allosteric response to inducer for V52C-oxidized remains intact for a small group of operator variants. Temperature studies demonstrate that the presence of the disulfide alters the thermodynamics of the protein-DNA interaction, with a DeltaC(p) of significantly smaller magnitude compared to wild-type LacI. The results presented here establish the hinge region as an important element not only for LacI high-affinity operator binding but also for the essential communication between ligand binding domains. Moreover, the results confirm that DNA sequence/conformation can profoundly influence allostery for this prototypic regulatory protein.

The mechanism by which genetic regulatory proteins discern specific target DNA sequences remains a major area of inquiry. To explore in more detail the interplay between DNA and protein sequence, we have examined binding of variant lac operator DNA sequences to a series of mutant lactose repressor proteins (LacI). These proteins were altered in the C-terminus of the hinge region that links the N-terminal DNA binding and core sugar binding domains. Variant operators differed from the wild-type operator, O(1), in spacing and/or symmetry of the half-sites that contact the LacI N-terminal DNA binding domain. Binding of wild-type and mutant proteins was affected differentially by variations in operator sequence and symmetry. While the mutant series exhibits a 10(4)-fold range in binding affinity for O(1) operator, only a approximately 20-fold difference in affinity is observed for a completely symmetric operator, O(sym), used widely in studies of the LacI protein. Further, DNA sequence influenced allosteric response for these proteins. Binding of this LacI mutant series to other variant operator DNA sequences indicated the importance of symmetry-related bases, spacing, and the central base pair sequence in high affinity complex formation. Conformational flexibility in the DNA and other aspects of the structure influenced by the sequence may establish the binding environment for protein and determine both affinity and potential for allostery.

Amino acid alterations were designed at the C terminus of the hinge segment (amino acids approximately 51-59) that links two functional domains within lactose repressor protein (LacI). Gly was introduced between Gly(58) and Lys(59) to generate Gly(58+1); Gln(60) was changed to Gly or Pro, and up to three additional glycines were inserted following Gln(60) --> Gly. All mutant proteins exhibited purification behavior, CD spectra, assembly state, and inducer binding properties similar to wild-type LacI and only small differences in trypsin proteolysis patterns. In contrast, significant differences were observed in DNA binding properties. Gly(58+1) exhibited a decrease of approximately 100-fold in affinity for O(1) operator, and sequential Gly insertion C-terminal to Gln(60) --> Gly resulted in progressively decreased affinity for O(1) operator, approaching nonspecific levels for insertion of >/=2 glycines. Where sufficient affinity for O(1) operator existed, decreased binding to O(1) in the presence of inducer indicated no disruption in the allosteric response for these proteins. Collectively, these results indicate that flexibility and/or spacing between the core and N-terminal domains did not significantly affect folding or assembly, but these alterations in the hinge domain profoundly altered affinity of the lactose repressor protein for its wild-type target sequence.

Substitution of Cys for Val at position 52 of the lac repressor was designed to permit disulfide bond formation between the two N-terminal DNA binding domains that comprise an operator DNA binding site. This position marks the closest approach of these domains based on the x-ray crystallographic structures of the homologous purine holorepressor-operator complex and lac repressor-operator complex (Schumacher, M. A., Choi, K. Y., Zalkin, H., and Brennan, R. G. (1994) Science 266, 763-770; Lewis, M., Chang, G., Horton, N.C., Kercher, M. A., Pace, H. C., Schumacher, M. A., Brennan, R. G., and Lu, P. (1996) Science 271, 1247-1254). The V52C mutation was generated by site-specific methods, and the mutant protein was purified and characterized. In the reduced form, V52C bound operator DNA with slightly increased affinity. Exposure to oxidizing conditions resulted in disulfide bond formation, and the oxidized protein bound operator DNA with approximately 6-fold higher affinity than wild-type protein. Inducer binding for both oxidized and reduced forms of V52C was comparable to wild-type lac repressor. In the presence of inducer, the reduced protein exhibited wild-type, diminished DNA binding. In contrast, DNA binding for the oxidized form was unaffected by inducer, even at 1 mM. Thus, the formation of the designed disulfide between Cys52 side chains within each dimer renders the protein-operator complex unresponsive to sugar binding, presumably by disrupting the allosteric linkage between operator and inducer binding.