Search

Supplemental material, sj-docx-1-pie-10.1177_09544089221150740 for A role of biomaterials in tissue engineering and drug encapsulation by Reeya Agrawal, Sangeeta Singh, Kuldeep K. Saxena and Dharam Buddhi in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-4-pie-10.1177_09544089231156053 for Heat transfer evaluation of single and hybrid nanofluids as cooling media in car radiators: A 3D-CFD approach in flat tubes by Mohammad Bagher Kiaei, Pouyan Adibi and Ehsan Abedini in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-pie-10.1177_09544089231163120 for Built-up edge formation and flank wear evolution in conventional machining of AZ91 magnesium alloy by Assem Alshibi, Abdelrahman Nasreldin and Salman Pervaiz in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-pie-10.1177_09544089231163724 for Multi-response optimization on abrasive water jet machining of Aluminum 7075 alloy using Taguchi–DEAR methodology by Ayyagounder Shanmugam, Thangamuthu Mohanraj, Kasilingam Krishnamurthy, Ali Kaya Gur and Ugur Caligulu in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental Material for Autoclave process parameters affecting mechanical and thermomechanical properties of CFRP laminates using response surface methodology by Abd Baghad and Khalil El Mabrouk in Journal of Reinforced Plastics and Composites

Supplemental material, sj-docx-1-pie-10.1177_09544089231151573 for Performance augmentation of a solar thermal desalination system using different floating absorber plates by Ashish Chandran K., Arun K. Raj and Sujith Kumar C.S. in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-jdr-10.1177_00220345231162344 for Cyclic di-AMP Rescues Porphyromonas gingivalis–Aggravated Atherosclerosis by Q. Wu, Z. Li, Y. Zhang, K. Luo, X. Xu, J. Li, X. Peng and X. Zhou in Journal of Dental Research

The fundamental interactions of liquid iron with carbon, titanium, and nitrogen are at the heart of the blast furnace process, dictating productivity and longevity. The interactions of liquid Fe and C are particularly important in the hearth, with dissolution governing the properties of degradation of the carbonaceous hearth. When titanium and nitrogen are included in liquid Fe-C, Ti(C,N) can catalyze the solidification of an iron skull, further protecting refractory. Though a four-component system may seem simple, basic questions still need to be answered as to how these interactions affect the hearth refractory and, therefore, the campaign life of the blast furnace. A set of experiments is presented to illuminate how the formation of Ti(C,N) may protect the hearth. Graphite rods were dissolved into Fe-C containing Ti(C,N) but showed little difference in dissolution rate compared to rods dissolved without Ti(C,N). Rods with carbonaceous coatings doped with TiC, TiN, and Ti(C,N) were dipped into stagnant liquid Fe-C to test the propensity of dopants to assist in shell solidification. These experiments showed the importance of heat extraction to protecting the hearth. Micrographs of iron-carbon interfaces saw the majority of Ti(C,N) in large agglomerations away from the interface. The ability of Ti(C,N) to form these large agglomerations is likely the reason Ti additions are uniquely able to protect the hearth. The interactions of liquid Fe-Csat and glassy carbon are also investigated to determine if glassy carbon is a suitable material for the hot face. Other experiments are documented to increase the utility of the high temperature confocal scanning laser microscope.

Supplemental material, sj-docx-1-jdr-10.1177_00220345231173585 for Predicting Dental Caries in Young Children in Primary Health Care Settings by M. Fontana, G.J. Eckert, B.P. Katz, M.A. Keels, B.T. Levy, S.M. Levy, A.R. Kemper, E. Yanca, R. Jackson, J. Warren, J.L. Kolker, J.M. Daly, S. Kelly, J. Talbert and P. McKnight in Journal of Dental Research

Supplemental material, sj-docx-6-pie-10.1177_09544089231162292 for Effect of alkali treatment on cotton/bamboo fibres for application as a reinforcement material by A Karthik, Jafrey Daniel James D, PS Sampath and V Thirumurugan in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-pie-10.1177_09544089231172029 for Detection and evaluation of load oscillations in induction motors based on MCSA by Yuejiang Han, Jianping Yuan, Yin Luo, Jiamin Zou and Xuecong Qin in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-2-eea-10.1177_01445987221149221 for The high-frequency sea-level change in the aftermath of the Marinoan snowball Earth: Evidence from the Doushantuo formation in the northern margin of the Yangtze Craton, South China by Kening Qi, Hongwei Kuang, Yongqing Liu, Nan Peng, Yuchong Wang, Xiaoshuai Chen, Mingming Cui, Dawei Qiao, Shuangying Li, Tianhu Chen, Zhixian Wang, Quan Zhong and Jinxin Chen in Energy Exploration & Exploitation

Supplemental Material for Intraoperative Determination of Bronchus Stump and Anastomosis Perfusion with Hyperspectral Imaging by David B. Ellebrecht and Christian Kugler in Surgical Innovation

Supplemental Material for Immersive Live Streaming of Surgery Using 360-Degree Video to Head-Mounted Virtual Reality Devices: A New Paradigm in Surgical Education by Alejandro Gandsas, MD, MBA, Trevor Dorey, MD, MSc, and Adrian Park, MD in Surgical Innovation

Supplemental material, sj-docx-1-chl-10.1177_17475198221139085 for A label- and enzyme-free fluorescence assay based on thioflavin T–induced G-quadruplexes for the detection of telomerase activity by Zhe Chen and Yunxia Wang in Journal of Chemical Research

Supplemental material, sj-docx-1-pie-10.1177_09544089231169646 for Surface pre-reacted glass reinforced dental composite: Performance assessment of physicochemical, static mechanical, dynamic mechanical and wear properties by Shiv Ranjan Kumar and Ajay Sharma in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-jdr-10.1177_00220345231159821 for ScRNA-Seq Reveals a Distinct Osteogenic Progenitor of Alveolar Bone by A. Jin, H. Xu, X. Gao, S. Sun, Y. Yang, X. Huang, X. Wang, Y. Liu, Y. Zhu, Q. Dai, Q. Bian and L. Jiang in Journal of Dental Research

Supplemental Material for Thermochemical recycling of epoxy resin composites reinforced with carbon fiber by Gabriel Nicolai, Augusto PV Bôas, Manoel OA Méndez and Osvaldir P Taranto in Journal of Composite Materials.

Supplemental material, sj-docx-1-pie-10.1177_09544089231159180 for Microstructure and mechanical properties of A7N01-T4 aluminum alloy metal inert gas welded joints filled with self-designed 7A48 aluminum alloy wire by Zhi Li, Rongzheng Xu, Xuming Guo, Yan Zhang and Zhicheng Wei in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-pdf-1-tim-10.1177_01423312231164455 for RDB-CSCA: A deep learning method to identify the spectral information for tracing the egg quality by Chaohua Yan and An Lu in Transactions of the Institute of Measurement and Control

Supplemental material, sj-docx-2-pie-10.1177_09544089231164836 for Multi-objective parametric optimization of AWJM process using Taguchi-based GRA and DEAR methodology by Venkateshwar Reddy Pathapalli, Srinivasa Rao Pittam, Venukumar Sarila, Dhanraj Burragalla and Arora Gagandeep in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-jdr-10.1177_00220345221148161 for Impact of Treatment on Host Responses in Young Individuals with Periodontitis by L.S. Branco-de-Almeida, I.M. Velsko, I.C.V. de Oliveira, R.C.G. de Oliveira and L.M. Shaddox in Journal of Dental Research

Supplemental Material for The fabrication and evaluation of silver nanoparticle-based keratin scaffolds by Tongda Lei, Jie Fan, Yongheng Wang, Fuyuan Cao, Qingqi Yang, Faming Tian, Bo Li, Zhibo Su, Rouxi Chen and Yong Liu in Journal of Biomaterials Applications

Supplemental material, sj-docx-1-pie-10.1177_09544089231154528 for Thermal performance assessment of the coaxial pipe evacuated tube solar air heater in Bilaspur climatic conditions by Prashant Kumar Jangde and T V Arjunan in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-pie-10.1177_09544089221150703 for Investigations on erosion performance of carbon fiber–epoxy-based composite adhesion on 16Cr5Ni steel by Mithlesh Sharma, Deepak Kumar Goyal, Anuj Bansal, Anil Kumar Singla, Neel Kanth Grover, Munish Kumar Gupta and Navneet Khanna in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-2-pie-10.1177_09544089231157638 for Mechanical, thermal, and acoustic properties of natural fibre-reinforced polyester by Mohammed Y Abdellah, Mustafa Gamal Sadek, Hamzah Alharthi and G T Abdel-Jaber in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-3-pie-10.1177_09544089231159780 for Effect of deep cryogenic treatment, tempering temperature and time on hardness of Nimonic-90 by Gurkirat Singh and Kailash Nath Pandey in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-pie-10.1177_09544089231166651 for Effect of process parameters on surface roughness of NiCu alloy in fluid jet polishing by Shubham Choudhary, Ravinder Kumar Duvedi and Jaswinder Singh Saini in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-jdr-10.1177_00220345231162349 for Disaggregated Nano-Hydroxyapatite (DnHAP) with Inhibitory Effects on Biofilms and Demineralization by Y. Huang, Q. Han, X. Peng, B. Ren, J. Li, X. Zhou, M. Li and L. Cheng in Journal of Dental Research

Supplemental material, sj-pdf-1-scd-10.1177_17568277221149507 for Inhibiting the onset of thermoacoustic instability through targeted control of critical regions by Manikandan Raghunathan, Nitin Babu George, Vishnu R. Unni, Jürgen Kurths, Elena Surovyatkina and R. I. Sujith in International Journal of Spray and Combustion Dynamics

Supplemental material, sj-docx-2-pio-10.1177_1748006X221146367 for A new failure times model for one and two failure modes system: A Bayesian study with Hamiltonian Monte Carlo simulation by Badamasi Abba and Hong Wang in Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability

Supplemental material, sj-pdf-1-pie-10.1177_09544089231173215 for GMA welding investigations on the effect of alternating shielding gases on bead profile characteristics of AA6061 aluminum alloy by Mahadevan G, Senthilkumar T and Ramasamy N in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-pie-10.1177_09544089231165128 for Casing failure mechanism and slip anchoring optimization of the compression packer in the oil and gas well by Yang Tang, Jie Wang, Minghai Zhou, Guangyao Li and Xiao Xiao in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental Material for Agricultural-waste Sesamum indicum L./recycled-low density polyethylene bio-composites: Impact of gamma radiation on mechanical and thermal properties by Neha Bansal, Simran Ahuja, Sohan Lal, and Sanjiv Arora in Journal of Reinforced Plastics and Composites

Supplemental Material for High impact strength of aliphatic polyketone/polyamide 6 blends induced by a chemical reaction by Hong Gu Kwon, Jungyeon Park, Namho Kim, Shichoon Lee, Jaeyoon Shim, Mincheol Lee and Younggon Son in Journal of Elastomers & Plastics

Supplemental material, sj-pdf-1-scd-10.1177_17568277221149507 for Inhibiting the onset of thermoacoustic instability through targeted control of critical regions by Manikandan Raghunathan, Nitin Babu George, Vishnu R. Unni, Jürgen Kurths, Elena Surovyatkina and R. I. Sujith in International Journal of Spray and Combustion Dynamics

Supplemental material, sj-docx-1-pim-10.1177_14750902231166442 for Energy-specific greenhouse gas emissions measurements from 2-stroke marine diesel engine using liquefied natural gas by Kang-Ki Lee, Wilfried Hochegger and Alessandro Schönborn in Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment

Supplemental material, sj-docx-1-pie-10.1177_09544089231166303 for Analyzing the geometrical errors of silicon nitride-titanium nitride on performing electric discharge machining using response surface methodology by Selvarajan Lakshmanan, Rajavel Rajendran, Senthil Kumar Shanmugakani and Venkataramanan Krishnamoorthy in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-jdr-10.1177_00220345231156095 for Reduced Autophagy in Aged Trigeminal Neurons Causes Amyloid β Diffusion by R. Sonoda, E. Kuramoto, S. Minami, S.E. Matsumoto, Y. Ohyagi, T. Saito, T. Saido, K. Noguchi and T. Goto in Journal of Dental Research

Supplemental material, sj-docx-1-pie-10.1177_09544089231151541 for Prediction of stability parameters of ferric oxide nanofluids using response surface methodology based on desirability approach by KPV Krishna Varma, Kavati Venkateswarlu, PV Durga Prasad and Uday Kumar Nutakki in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

AC loss generated in Superferric magnets composed of high temperature superconducting (HTS) coil windings and iron cores is one of critical issues for rapid-cycling synchrotrons (RCSs) application. In this work, we carried out 3D FEM AC loss simulations in HTS coil assemblies coupled with an iron core using the T-A homogenization method. The HTS coil assemblies consist of a stack of double pancake coils (DPCs) wound with 4 mm - wide Shanghai Superconductor wires with an average self-field critical current of 192.6 A. The numerical and experimental AC loss results of a DPC (1 DPC) without the iron core were compared to validate the 3D T-A homogenization method. Then, 3D AC loss simulations were carried out on the DPC assemblies with different number of DPCs with/without the iron core to investigate the influence of the iron core and the coil number on AC loss. The iron core causes increase in AC loss values of the DPC assemblies. AC loss increases by a factor of five in the 4 DPC assembly with the iron core compared with that without the iron core. The simulation result in the 4 DPC assembly with the iron core reveals that strong perpendicular magnetic field penetration occurs even in the center DPCs and this explains the substantial AC loss increase in the 4 DPC assembly.

Supplemental material, sj-docx-1-pie-10.1177_09544089231151536 for Study on damaged micro-mechanism of pipe wall during braking and anchoring process of pipeline intelligent plugging robot by Yang Tang, Zhou Minghai, Peng Sun, Jie Wu, Qiang Wang and Ju Wu in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental Material for A novel carbazole based bismaleimide monomer: Synthesis, characterization, thermal and optical properties by Nurcan Karaca

Supplemental material, sj-docx-3-pie-10.1177_09544089231167761 for Intelligent assessment of quality characteristics of miscanthus fiber-reinforced polypropylene for sustainable products development by Chukwutoo Christopher Ihueze, Okoli Ndubuisi Celestine, Uchendu Onwusoronye Onwurah, Christian Emeka Okafor and Queeneth Adesuwa Kingsley-Omoyibo in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-2-pie-10.1177_09544089231172163 for Soret and Dufour effects on the magnetohydrodynamic free convective flow of Maxwell nanofluid past an infinite stretching sheet by M Harikrushna, G Prabhakara Rao and M Veera Krishna in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-2-pie-10.1177_09544089231170999 for Parametric optimization and ranking analysis of basalt fiber–marble dust particulates–polyamide 66 polymer composites under dry sliding wear investigation by Ravi Prakash Sharma, Ankit Sharma, Sudhanraj Jeganmohan, Mukesh Kumar and Ashiwani Kumar in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, LFN889502 Supplemental Material for Intelligent integrated monitoring system for lathe equipment by Bo-Lin Jian, Chin-Tsung Hsieh and Yu-Syong Guo in Journal of Low Frequency Noise, Vibration and Active Control

Supplemental material, sj-docx-1-pie-10.1177_09544089231158187 for Planar parallel manipulators: A review on kinematic, dynamic, and control aspects by Rutupurna Choudhury and Yogesh Singh in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental material, sj-docx-1-pie-10.1177_09544089221150740 for A role of biomaterials in tissue engineering and drug encapsulation by Reeya Agrawal, Sangeeta Singh, Kuldeep K. Saxena and Dharam Buddhi in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Supplemental Material for Development and characterization of sandwich panels for thermal insulation in a cold storage chamber by Ana P Sartori, Heitor L Ornaghi, Nayrim B Guerra, Paulo R Wander, Marcelo Giovanela, Regina C Reis Nunes and Janaina da Silva Crespo in Journal of Cellular Plastics