Search

INTRODUCTION Part of the appeal of e-cigarettes lies in their available flavors. To achieve attractive flavors, e-liquids contain many different flavoring agents, which allow many flavoring combinations. To advance our knowledge of e-liquid flavors and compositions and to evaluate the effect of legislation, we determined whether there are ingredient combinations that are frequently used together. METHODS We used e-cigarette ingredient data from the European Common Entry Gate system (EU-CEG) as available on 31 December 2022. RESULTS In e-liquids, we found 214 ingredient pairs with a co-occurrence odds ratio greater than 10. Together, these consisted of 62 unique ingredients. Network analysis revealed that ingredients were grouped together based on their flavor and/or chemical structure. We identified two densely connected regions (clusters) in the network. One consisted of six ingredients with sweet-vanilla-creamy flavors. The second cluster consisted of 13 ingredients. While some of these have fruity flavors, others, such as alkyl carboxylic acids and dimethyl sulfide, are known to have unpleasant flavors. Additional data and literature analyses indicated that alkyl carboxylic acids can contribute to a creamy and sweet-fruity taste, whereas dimethyl sulfide can contribute to a more refined fruity taste. CONCLUSIONS These results exemplify that the flavor of e-liquids is not just the sum of its parts. Big data analyses on product data can be used to detect such patterns, but expert knowledge and additional data are needed for further interpretation. Monitoring of e-liquid flavors as well as ingredients will remain important to regulate e-liquid product attractiveness. [ABSTRACT FROM AUTHOR]

Tea is one of the most popular and oldest beverages available in many varieties and the use of different flavoring ingredients is becoming more common. The present study aimed to examine tea consumption behavior during the COVID-19 pandemic and analyzed the bioactive compounds of tea flavoring ingredients. At first, a cross-sectional study was carried out with 140 randomly selected participants to determine tea consumption patterns and data was collected through face-to-face interviews. Then 2,2-diphenyl-1-picrylhydrazyl (DPPH) test, the Folin-Ciocalteu technique, and the quercetin method were used to assess antioxidant activity, total phenolic content (TPC), and total flavonoid content (TFC) of tea flavoring ingredients. The study found that 57.86% of the participants increased their tea consumption during the COVID-19 pandemic, whereas 22.80% increased their tea consumption by at least one more cup per day. It was also found that ginger was the most popular (29.5%) among fifteen tea flavoring agents. By analyzing tea flavoring ingredients, the maximum antioxidant activity found in cinnamon was 87%, and lemon leaves had the lowest, which was 60%. On a dry weight basis, the TPC of the tea flavoring components ranged from 36.52 mg GAE/g for cloves to 9.62 mg GAE/g for ginger. The maximum TFC was also found in clove with 13.68 mg QE/g, and moringa was the second highest with 12.26 mg GAE/g. The antioxidant activity of flavoring compounds has a significant correlation (p<0.05) with TPC and TFC. Overall, tea consumption behavior with tea flavoring ingredients increased during the COVID-19 pandemic situation. Tea with flavoring ingredients may be one of the best dietary sources of antioxidants, TPC, and TFC which are important for strengthening the immune system and controlling different physiological and metabolic disorders. [ABSTRACT FROM AUTHOR]

Introduction: Menthol, through its cooling and pleasant sensory effects, facilitates smoking and tobacco product initiation, resulting in the high popularity of mint/menthol-flavored E-cigarettes. More recently, E-cigarette vendors started marketing synthetic cooling agents as additives that impart a cooling effect but lack a characteristic minty odor. Knowledge about content of synthetic coolants in US-marketed E-cigarette products and associated health risks is limited.Aims and Methods: E-liquid vendor sites were searched with the terms "koolada", "kool/cool", "ice", or WS-3/WS-23, denoting individual cooling agents, and relevant refill E-liquids were purchased. "Ice" flavor varieties of Puffbar, the most popular disposable E-cigarette brand, were compared with non-"Ice" varieties. E-liquids were characterized, and synthetic coolants quantified using GC/MS. Margin of exposure (MOE), a risk assessment parameter, was calculated to assess the risk associated with synthetic coolant exposure from E-cigarette use.Results: WS-3 was detected in 24/25 refill E-liquids analyzed. All Puffbar flavor varieties contained either WS-23 (13/14) or WS-3 (5/14), in both "Ice"- and non-"Ice" flavors. Modeling consumption of WS-3 from vaped E-liquids, resulted in MOEs below the safe margin of 100 for most daily use scenarios. MOEs for WS-23 were <100 for 10/13 Puffbar flavors in all use scenarios. Puffbar power specifications are identical to Juul devices.Conclusions: Synthetic cooling agents (WS-3/WS-23) were present in US-marketed E-cigarettes, at levels that may result in consumer exposures exceeding safety thresholds set by regulatory agencies. Synthetic coolants are not only found in mint- or menthol-flavored products but also in fruit- and candy-flavored products, including popular disposable E-cigarette products such as Puffbar.Implications: Synthetic cooling agents are widely used in "kool/cool"- and "ice"-flavored E-liquids and in E-liquids without these labels, both as a potential replacement for menthol or to add cooling "notes" to nonmenthol flavors. These agents may be used to bypass current and future regulatory limits on menthol content in tobacco products, and not just E-cigarettes. Because synthetic cooling agents are odorless, they may not fall under the category of "characterizing flavor", potentially circumventing regulatory measures based on this concept. Regulators need to consider the additional health risks associated with exposure to synthetic cooling agents. [ABSTRACT FROM AUTHOR]

E-cigarettes are battery-operated devices that heat a liquid mixture to make an aerosol that is inhaled, or vaped, by the user. Vape shops are retail environments designed to fulfill customer demand for diverse e-liquid flavors and hardware options, which create unique worker exposure concerns. To characterize exposures to vape shop workers, especially to flavoring chemicals associated with known respiratory toxicity, this study recruited vape shops from the San Francisco Bay Area. In six shops, we measured air concentrations for volatile organic compounds, formaldehyde, flavoring chemicals, and nicotine in personal and/or area samples; analyzed components of e-liquids vaped during field visits; and assessed metals on surface wipe samples. Interviews and observations were conducted over the course of a workday in the same six shops and interviews were performed in an additional six where sampling was not conducted. Detections of the alpha-diketone butter flavoring chemicals diacetyl and/or 2,3-pentanedione were common: in the headspace of purchased e-liquids (18 of 26 samples), in personal air samples (5 of 16), and in area air samples (2 of 6 shops). Two exceedances of recommended exposure limits for 2,3-pentanedione (a short-term exposure limit and an 8-hr time-weighted average) were measured in personal air samples. Other compounds detected in the area and personal air samples included substitutes for diacetyl and 2,3-pentanedione (acetoin and 2,3-hexanedione) and compounds that may be contaminants or impurities. Furthermore, a large variety (82) of other flavoring chemicals were detected in area air samples. None of the 12 shops interviewed had a health and safety program. Six shops reported no use of any personal protective equipment (PPE) (e.g., gloves, chemical resistant aprons, eye protection) and the others stated occasional use; however, no PPE use was observed during any field investigation day. Recommendations were provided to shops that included making improvements to ventilation, hygiene, use of personal protective equipment, and, if possible, avoidance of products containing the alpha-diketone flavoring chemicals. Future research is needed to evaluate the long-term health risks among workers in the vape shop retail industry and for e-cigarette use generally. Specific areas include further characterizing e-liquid constituents and emissions, evaluating ingredient health risks, evaluating the contributions of different routes of exposure (dermal, inhalation, and ingestion), and determining effective exposure mitigation measures. [ABSTRACT FROM AUTHOR]

Introduction: This study examined in youth (12-17 years), young adults (18-24 years), and adults (25+ years): (1) the prevalence of the first menthol cigarette and menthol/mint cigar use among new tobacco users; (2) association between the first menthol/mint use, subsequent tobacco use, and nicotine dependence ~1 year later compared with the first non-menthol/mint use.Aims and Methods: Longitudinal analysis of data from Waves 1 to 4 of the Population Assessment of Tobacco and Health (PATH) Study (2013-2017; 10 086 youth and 21 281 adults). Main outcome measures were past 12-month and past 30-day cigarette and cigar use, and nicotine dependence.Results: Youth and young adult new cigarette users are more likely to smoke a menthol cigarette or indicate that they do not know the flavor compared with adults aged 25+. A greater proportion of adults aged 25+ first used menthol/mint-flavored cigars (13.4%) compared with youth (8.5%) and young adults (7.4%). Among young adults, first use of a menthol cigarette is associated with past 12-month use of cigarettes at the subsequent wave and first use of any menthol/mint-flavored cigars is associated with past 30-day use of these products at the subsequent wave in both youth and young adults. In youth and adults, there were no significant relationships between first use of a menthol/mint cigarette or cigar and nicotine dependence scores at a subsequent wave in multivariable analyses.Conclusions: The first use of menthol/mint cigarettes and cigars is associated with subsequent cigarette and cigar use in young people aged 12-24.Implications: This study examined the relationship between initiation with menthol cigarettes and menthol/mint cigars, subsequent tobacco use, and nicotine dependence in US youth, young adults, and adults who participated in Waves 1-4 of the Population Assessment of Tobacco and Health study. New use of menthol cigarettes was associated with greater past 12-month cigarette use in young adults and new use of menthol/mint-flavored cigars was associated with greater past 30-day cigar use in youth and young adults compared with non-menthol use. Initiation with menthol/mint cigarette and cigar products may lead to subsequent use of those products. [ABSTRACT FROM AUTHOR]

Background Alpha-diketones such as diacetyl and 2,3-pentanedione have been used as artificial flavorings in a variety of industries and are produced naturally when food products such as coffee beans are roasted. Exposure to these compounds has been associated with bronchiolitis obliterans, a rare and severe respiratory disease. In the current paper, we (i) evaluate which steps in the coffee production process are associated with the highest alpha-diketone emissions at a small craft coffee roaster and associated café, (ii) determine the extent to which direct-reading measurements of CO, CO2, and total volatile organic compounds (VOCs) can serve as lower-cost surrogate indicators for diacetyl concentrations, and (iii) conduct a limited emissions study to quantify the effect that the process variable of roast type has on diacetyl emissions from grinding beans. Methods Exposure and area concentration data for diacetyl and 2,3-pentanedione were collected over 4 days of sampling at a single coffee roaster and associated café. Additional measurements of café patrons' exposure to diacetyl were collected in seven other craft roastery/cafes in Seattle, WA. For the emissions experiments, integrated area air samples for diacetyl were collected using sorbent tubes over 30-min intervals for each roast type with the sorbent tubes positioned next to a grinder placed in an exposure chamber. Sorbent tubes were analyzed for alpha-diketones using gas chromatography–mass spectrometry. A photoionization detector (PID) was also used to measure continuous total VOC concentrations at the coffee roastery, and during each grinding experiment. Results Diacetyl concentrations in five of the seven personal samples from the craft roastery were above the United States National Institute of Occupational Safety and Health (NIOSH) Recommended Exposure Limit (REL) of 5 ppb as an 8-h time-weighted average (TWA)—and one of the seven personal samples exceeded the NIOSH REL for 2,3-pentanedione—9.3 ppb as an 8-h TWA. Median diacetyl and 2,3-pentanedione emissions were highest at the bagging machine followed by the grinder, roaster, barista, and background areas. The arithmetic mean diacetyl concentrations from the seven personal samples collected from café patrons was 3.96 ppb, suggesting that diacetyl exposure poses a negligible health risk to café patrons. Correlations between diacetyl and total VOCs, CO, and CO2 showed that diacetyl was well correlated with total VOCs, but poorly correlated with CO and CO2. Based on our limited emissions study, French roast was associated with the highest mass emission factor of diacetyl. Conclusions Results from the exposure assessment study indicated that coffee production workers at this facility had elevated exposures to diacetyl and 2,3-pentanedione compared to recommended guidelines, whereas baristas and café patrons received lower exposures. Area sampling showed that the areas with the highest alpha-diketone emissions were the grinder and the bagging machine, which are both areas associated with tasks involving ground roasted coffee. Future research could focus on designing and evaluating effective engineering controls, in the form of local exhaust ventilation, with the goal of reducing alpha diketone exposures, as well as conducting similar studies at other small-scale craft coffee roasters and cafés to better understand the variability in these emissions and exposures within these types of facilities. [ABSTRACT FROM AUTHOR]

Introduction: Many electronic cigarette manufacturers have begun offering liquids containing "nicotine salts," which are formed when an acid is mixed in a solution with free-base nicotine. Type of salt could play a significant role in the abuse liability of electronic cigarette liquids. As a first step to understanding nicotine salts, this study sought to identify the types of acids present in 23 commercially available electronic cigarette liquids.Aims and Methods: Twenty-three electronic cigarette liquids advertised as containing nicotine salts were purchased for analysis. These liquids were tested for the presence of 11 different organic acids that were deemed likely to be used in a nicotine salt formulation. Liquids were analyzed using a combination of liquid chromatography-mass spectrometry and gas chromatography-mass spectrometry methods, then compared to authentic acid standards for identification.Results: Six of the 11 possible acids were identified in the liquids, from most to least common: lactic, benzoic, levulinic, salicyclic, malic, and tartaric acid. Acid(s) could not be identified in one of the liquids. Though most liquids contained only one type, three of the liquids contained multiple acids.Conclusions: These data demonstrate that several types of salts/acids are currently being used in electronic cigarette liquids. The type and concentration of salt(s) used in these liquids may differentially alter sensations in the throat and upper airway, and overall pharmacology of the aerosols by altering liquid pH and from flavor and sensory characteristics of the acids themselves.Implications: This study demonstrates that at least six different types of acids are being used to create the nicotine salts in electronic cigarette liquids, with the acids lactic, benzoic, and levulinic being the most frequently identified. Identification of these acids can serve as the foundation for future research to determine if type of nicotine salt alters pharmacological and toxicological effects of electronic cigarettes. [ABSTRACT FROM AUTHOR]

The article reports on electronic cigarettes' unique toxicological profile for metals, solvents and flavoring chemicals. Topics discussed include nickel and chromium concentrations in electronic cigarettes, inhalation toxicity of propylene glycol and vegetable glycerol in electronic liquid, and the flavoring chemicals' interaction with solvents.

Objectives Workers using flavoring formulations containing diacetyl and 2,3-pentanedione may be at risk of inhalational exposure, as these volatile hazardous chemicals are emitted from the bulk material, especially at elevated temperatures. However, flavoring formulations that contain diacetyl and 2,3-pentanedione might not list these ingredients because they are generally recognized as safe to ingest, may be part of a proprietary mixture deemed a trade secret, or may not be required to be listed if they are present at <1% composition. The objective of this study was to investigate whether potential inhalational hazards present in flavoring samples were reported as chemical ingredients on their corresponding safety data sheets (SDSs). Methods A convenience sample of 26 bulk liquid flavorings obtained from two coffee roasting and packaging facilities in the USA was analyzed for 20 volatile organic chemicals present in the headspaces of vials containing flavoring liquids using gas chromatography-mass spectrometry. Flavoring samples were included in the study if headspace analysis results and SDSs were available. Flavoring samples included hazelnut, French vanilla, amaretto, chocolate, and caramel as well as some flavoring mixtures containing added fruit flavors such as cherry and raspberry. The presence of a chemical in the flavoring formulation was then compared to the ingredient list on the SDSs. Results All the flavoring SDSs contained trade secret designations. None of the SDSs listed diacetyl or 2,3-pentanedione. Headspace analyte concentrations revealed that diacetyl was present in 21 of 26 samples (81%) with a maximum concentration of 5.84 × 104 µg m−3 in flavor 18 (caramel). 2,3-Pentanedione was present in 15 flavors (58%) with a maximum concentration of 3.79 × 105 µg m−3 in flavor 24 (oatmeal cookies). Conclusions A majority of the flavorings tested had diacetyl, 2,3-pentanedione, or both as volatile constituents in the headspace. These chemicals were not listed on the SDSs, but inclusion of diacetyl and 2,3-pentanedione on SDSs would serve to protect downstream users from unrecognized exposure and potential respiratory disease. The headspace technique presented here is a viable tool to rapidly screen for volatile hazardous chemicals that may be present in flavoring formulations. Facilities that use flavorings should be aware that constituents in flavorings may present a potential inhalational hazard even if not identified as such by the SDS. A precautionary approach is warranted when working with flavorings, including exposure monitoring and effective exposure control strategies such as containment and local exhaust ventilation. [ABSTRACT FROM AUTHOR]

This Research Letter evaluates the amount of sugars found in cigarillos by brand. [ABSTRACT FROM AUTHOR]

The influence of polyol type and particle size on the flavor release profile of chewing gum was investigated in vivo . Four chewing gum samples with an average particle size of 62 or 246 μm for sorbitol and 57 or 184 μm for mannitol were analyzed. Chewing gum formulated with mannitol, in general, had a higher aroma release than chewing gum formulated with sorbitol. Polyol type did not influence the release profile of the high intensity sweeteners (HIS) aspartame and acesulfame K. However, a smaller particle size resulted in a significantly higher release of HIS. The release rate of polyol was not significantly changed by particle size. Sensory analysis was also in agreement with the HIS delivery; the smaller particle size polyol gum was significantly higher in perceived sweetness intensity. In summary, two physical attributes of polyols (solubility and surface area) were reported to uniquely alter the delivery of aroma and taste stimuli. [ABSTRACT FROM AUTHOR]

Pre-fermentation plays a vital role in the processing of sufu. The quality of sufu made using different microbes tends to vary. Here, we performed mixed fermentation and single-strain fermentation using Mucor racemosus and Rhizopus oryzae to produce sufu. The free amino acids and volatile flavor components of sufu prepared by the 3 fermentation methods were detected by an automatic amino acid analyzer and GC-MS, respectively. In mixedfermented sufu, the total amounts of free amino acids, flavor amino acids, hydrophobic amino acids, and essential amino acids were superior those obtained by fermentation using either strain singly. Mixed-fermented sufu also showed the lowest content of free tyrosine, reducing the undesirable "white spot" phenomenon of sufu. Volatile flavor compounds in mixedfermented sufu better than those of single-fungus fermentation. We demonstrated that mixed fermentation can improve the flavor and quality of sufu. [ABSTRACT FROM AUTHOR]

An effective and thorough approach for the safety evaluation of natural flavor complexes (NFCs) was published in 2005 by the Expert Panel of the Flavor and Extract Manufacturers Association (FEMA). An updated procedure is provided here, which maintains the essential concepts of the use of the congeneric group approach and the reliance on the threshold of toxicological concern (TTC) concept. The updated procedure emphasizes more rigorous considerations of unidentified constituents and the genotoxic potential of constituents. The update of the previously established procedure is the first step in a multi-year project to conduct safety re-evaluations for more than 250 NFCs that have uses that are currently considered Generally Recognized as Safe (GRAS) by the FEMA Expert Panel. In addition, this procedure can be more generally employed in the safety evaluation of NFCs. [ABSTRACT FROM AUTHOR]

Benzoic acid is an aromatic carboxylic acid naturally present in plant and animal tissues, which can also be produced by microorganisms. Benzoic acid and a wide range of derivatives and related benzenic compounds, such as salts, alkyl esters, parabens, benzyl alcohol, benzaldehyde, and benzoyl peroxide, are commonly used as antibacterial and antifungal preservatives and as flavoring agents in food, cosmetic, hygiene, and pharmaceutical products. As a result of their widespread occurrence, production, and uses, these compounds are largely distributed in the environment and found in water, soil, and air. Consequently, human exposure to them can be high, common, and lengthy. This review is mainly focused on the presence and use of benzoic acid in foods but it also covers the occurrence, uses, human exposure, metabolism, toxicology, analytical methods for detection, and legal limits for benzoic acid and its derivatives. Their controversial effects and potential public health concerns are discussed. [ABSTRACT FROM AUTHOR]

Introduction: In 2011 menthol cigarettes accounted for 32 percent of the market in the United States, but there are few literature reports that provide measured menthol data for commercial cigarettes. To assess current menthol application levels in the US cigarette market, menthol levels in cigarettes labeled or not labeled to contain menthol was determined for a variety of contemporary domestic cigarette products.Method: We measured the menthol content of 45 whole cigarettes using a validated gas chromatography/mass spectrometry method.Results: In 23 cigarette brands labeled as menthol products, the menthol levels of the whole cigarette ranged from 2.9 to 19.6mg/cigarette, with three products having higher levels of menthol relative to the other menthol products. The menthol levels for 22 cigarette products not labeled to contain menthol ranged from 0.002 to 0.07mg/cigarette. The type of packaging (soft vs. hard pack) for a given cigarette product does not appear to affect menthol levels based on the current limited data.Conclusions: Menthol levels in cigarette products labeled as containing menthol are approximately 50- to 5000-fold higher than those in cigarette products not labeled as containing menthol. In general, menthol content appears to occur within discrete ranges for both mentholated and nonmentholated cigarettes.Implications: This study shows that menthol may be present in non-mentholated cigarettes and adds to the understanding of how menthol may be used in cigarette products. It is the first systematic study from the same laboratory which will readily enable comparison among menthol and non-menthol cigarettes. [ABSTRACT FROM AUTHOR]

Background: Products with strong non-tobacco flavours are popular among young people, and facilitate smoking initiation. Similar to the U.S. Food and Drug Administration Tobacco Control Act, the new European Tobacco Product Directive (TPD) prohibits cigarettes and roll-your-own tobacco with a characterising flavour other than tobacco. However, no methods are prescribed or operational to assess characterising flavours. This is the first study to identify, review and synthesize the existing peer-reviewed and tobacco industry literature in order to provide an inventory of methods suitable to assess characterising flavours.Methods: Authors gathered key empirical and theoretical papers examining methods suitable to assess characterising flavours. Scientific literature databases (PubMed and Scopus) and tobacco industry documents were searched, based on several keyword combinations. Inclusion criteria were relevance for smoked tobacco products, and quality of data.Results: The findings reveal that there is a wide variation in natural tobacco flavours. Flavour differences from natural tobacco can be described by both expert and consumer sensory panels. Most methods are based on smoking tests, but odour evaluation has also been reported. Chemical analysis can be used to identify and quantify levels of specific flavour additives in tobacco products.Conclusions: As flavour perception is subjective, and requires human assessment, sensory analysis in consumer or expert panel studies is necessitated. We recommend developing validated tests for descriptive sensory analysis in combination with chemical-analytical measurements. Testing a broad range of brands, including those with quite subtle characterizing flavours, will provide the concentration above which an additive will impart a characterising flavour. [ABSTRACT FROM AUTHOR]

Background Most e-cigarette liquids contain flavour chemicals. Flavour chemicals certified as safe for ingestion by the Flavor Extracts Manufacturers Association may not be safe for use in e-cigarettes. This study identified and measured flavour chemicals in 30 e-cigarette fluids. Methods Two brands of single-use e-cigarettes were selected and their fluids in multiple flavour types analysed by gas chromatography/mass spectrometry. For the same flavour types, and for selected confectionary flavours (eg, bubble gum and cotton candy), also analysed were convenience samples of e-cigarette fluids in refill bottles from local 'vape' shops and online retailers. Results In many liquids, total flavour chemicals were found to be in the ~1-4% range (10-40 mg/mL); labelled levels of nicotine were in the range of 0.6-2.4% (6 to 24 mg/mL). A significant number of the flavour chemicals were aldehydes, a compound class recognised as 'primary irritants' of mucosal tissue of the respiratory tract. Many of the products contained the same flavour chemicals: vanillin and/or ethyl vanillin was found in 17 of the liquids as one of the top three flavour chemicals, and/or at ≥0.5 mg/mL. Conclusions The concentrations of some flavour chemicals in e-cigarette fluids are sufficiently high for inhalation exposure by vaping to be of toxicological concern. Regulatory limits should be contemplated for levels of some of the more worrisome chemicals as well as for total flavour chemical levels. Ingredient labeling should also be required. [ABSTRACT FROM AUTHOR]

The black cumin essential oil and seeds are used in folk medicine, as a bread or cheese flavoring and as a spice in various kinds of meals. In arid and semi-arid regions, where water availability is a major limitation in crop production, using alternative water resources, such as saline water is one way to utilize these barren lands. In this study, we investigate the possible effect of saline irrigation water (SIW) on essential oil (EO) of black cumin an economically important aromatic plant in Egypt. Application of SIW caused a pronounced increment in both EO content and yield. The highest yields of EO (1.1 ml 100 plant-1) obtained from the treatments of 3.1, 4.6 and 6.3 dSm-1. The main constituents of Nigella sativa L seeds EO as detected by GC/MS were p-cymene, α-thujen, β-pinene, γ-terpinene, terpinen-4-ol, thymoquinone and carvacrol which increased as saline irrigation water level increase. Monoterpene hydrocarbons, oxygenated monoterpene and sesquiterpene hydrocarbons were increased as SIW level increase. [ABSTRACT FROM AUTHOR]

Introduction: E-cigarette sales continue to increase in the United States. To date, little surveillance research has documented the specific product attributes driving growth. This study uses national market scanner data to describe sales trends in traditional U.S. tobacco retail channels between 2012 and 2013 and identifies product features associated with sales increases.Methods: Data on e-cigarette sales in convenience stores, drug stores, grocery stores, and mass merchandisers in the United States were obtained from the Nielsen Company. Each product was coded for attributes such as brand, flavor, and unit size. Total sales volume, market share, and percent growth were calculated for various product attributes.Results: E-cigarette sales more than doubled between 2012 and 2013, from $273.6 million to $636.2 million, respectively. Growth was particularly strong in the convenience store channel. Blu eCigs quickly emerged as the best-selling brand and in 2013 constituted nearly half (44.1%) of overall sales. Although fruit-flavored and other flavored products experienced marked growth, unflavored and menthol e-cigarettes overwhelmingly dominated the market. Sales of single unit products (likely disposable e-cigarettes) increased by 216.4%, a much faster rate than multi-unit packs and cartridge refills.Conclusions: In traditional U.S. retail channels, particularly the convenience store channel, sales of e-cigarettes continue to grow, with brands like blu and disposable products as the likely drivers. Given the rapidly-changing market, expanded surveillance is needed to monitor sales not only in traditional retail locations, but sales online and in specialty "vape shops," as well. [ABSTRACT FROM AUTHOR]

Introduction: Electronic cigarette (e-cigarette) use is increasing dramatically in developed countries, but little is known about these rapidly evolving products. This study analyzed and evaluated the chemical composition including nicotine, tobacco alkaloids, pH, and flavors in 36 e-liquids brands from 4 manufacturers.Methods: We determined the concentrations of nicotine, alkaloids, and select flavors and measured pH in solutions used in e-cigarettes. E-cigarette products were chosen based upon favorable consumer approval ratings from online review websites. Quantitative analyses were performed using strict quality assurance/quality control validated methods previously established by our lab for the measurement of nicotine, alkaloids, pH, and flavors.Results: Three-quarters of the products contained lower measured nicotine levels than the stated label values (6%-42% by concentration). The pH for e-liquids ranged from 5.1-9.1. Minor tobacco alkaloids were found in all samples containing nicotine, and their relative concentrations varied widely among manufacturers. A number of common flavor compounds were analyzed in all e-liquids.Conclusions: Free nicotine levels calculated from the measurement of pH correlated with total nicotine content. The direct correlation between the total nicotine concentration and pH suggests that the alkalinity of nicotine drives the pH of e-cigarette solutions. A higher percentage of nicotine exists in the more absorbable free form as total nicotine concentration increases. A number of products contained tobacco alkaloids at concentrations that exceed U.S. pharmacopeia limits for impurities in nicotine used in pharmaceutical and food products. [ABSTRACT FROM AUTHOR]

Using the procedure devised by the Joint FAO/WHO Expert Committee on Food Additives (JECFA), we performed safety evaluations on five acetal flavouring substances uniquely used in Japan: acetaldehyde 2,3-butanediol acetal, acetoin dimethyl acetal, hexanal dibutyl acetal, hexanal glyceryl acetal and 4-methyl-2-pentanone propyleneglycol acetal. As no genotoxicity study data were available in the literature, all five substances had no chemical structural alerts predicting genotoxicity. Using Cramer’s classification, acetoin dimethyl acetal and hexanal dibutyl acetal were categorised as class I, and acetaldehyde 2,3-butanediol acetal, hexanal glyceryl acetal and 4-methyl-2-pentanone propyleneglycol acetal as class III. The estimated daily intakes for all five substances were within the range of 1.45–6.53 µg/person/day using the method of maximised survey-derived intake based on the annual production data in Japan from 2001, 2005, 2008 and 2010, and 156–720 µg/person/day using the single-portion exposure technique (SPET), based on the average use levels in standard portion sizes of flavoured foods. The daily intakes of the two class I substances were below the threshold of toxicological concern (TTC) – 1800 μg/person/day. The daily intakes of the three class III substances exceeded the TTC (90 μg/person/day). Two of these, acetaldehyde 2,3-butanediol acetal and hexanal glyceryl acetal, were expected to be metabolised into endogenous products after ingestion. For 4-methyl-2-pentanone propyleneglycol acetal, one of its metabolites was not expected to be metabolised into endogenous products. However, its daily intake level, based on the estimated intake calculated by the SPET method, was about 1/15 000th of the no observed effect level. It was thus concluded that all five substances raised no safety concerns when used for flavouring foods at the currently estimated intake levels. While no information onin vitroandin vivotoxicity for all five substances was available, their metabolites were judged as raising no safety concerns at the current levels of intake. [ABSTRACT FROM AUTHOR]

The Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids of the European Food Safety Authority was requested to evaluate 24 flavouring substances in the Flavouring Group Evaluation 24, Revision 2, using the Procedure in Commission Regulation (EC) No 1565/2000. This revision was made required owing to the inclusion of the assessment of new toxicity data on one supporting substance, 2-acetylpyrrole [FL-no: 14.047], to support the re-evaluation of one candidate substance, 2-acetyl-5-methylpyrrole [FL-no: 14.085]. Nine of the original 33 candidate substances [FL-no: 13.100, 14.002, 14.023, 14.094, 14.107, 14.138, 14.145, 14.163 and 14.169], for which additional data were requested, are no longer supported by Industry for use as flavouring substances in Europe and will therefore not be considered any further. None of the 24 substances were considered to have genotoxic potential. These candidate substances were evaluated through a stepwise approach that integrates information on the structure-activity relationships, intake from current uses, toxicological threshold of concern, and available data on metabolism and toxicity. The Panel concluded that the 24 substances [FL-no: 14.085, 14.088, 14.089, 14.092, 14.093, 14.103, 14.104, 14.105, 14.106, 14.110, 14.115, 14.116, 14.117, 14.118, 14.120, 14.124, 14.125, 14.131, 14.134, 14.135, 14.136, 14.140, 14.143 and 14.150] do not give rise to safety concern at their levels of dietary intake, estimated on the basis of the MSDI approach. Besides the safety assessment of these flavouring substances, the specifications for the materials of commerce have also been considered. Adequate specifications including complete purity criteria and identity for the materials of commerce have been provided for all 24 candidate substances. [ABSTRACT FROM AUTHOR]

The article discusses the development of multidimensional gas chromatography (MDGC) for identifying volatile organic compounds in complex mixtures. It addresses topics including the differences between MDGC and two-dimensional gas chromatography (2-D GC), applications of MDGC in industrial chemicals manufacturing, and the analysis of mixtures used in food flavorings.

In 2008, a company using multiple buttermilk flavorings in the production of dry bakery mixes replaced one liquid flavoring containing 15-20% diacetyl with a proprietary substitute meant to lower occupational risk for diacetyl-related bronchiolitis obliterans. Subsequently, the National Institute for Occupational Safety and Health (NIOSH) evaluated buttermilk flavoring-related exposures at this company's facility, with a focus on measuring ketones by several methods. Volatile organic compounds (VOCs) were evaluated in the headspaces of six bulk flavorings samples, including the substitute buttermilk flavoring. Ketones were evaluated in workplace air via area and personal samples collected during batch preparation of the substitute buttermilk flavoring and production of a bakery mix containing the same flavoring. Air samples were evaluated using five different methods: NIOSH 2549, Modified OSHA PV2118, OSHA 1013, NIOSH Draft Procedure SMP2, and evacuated canisters. Of five buttermilk flavorings from five different flavorings manufacturers, diacetyl was present in four, including the substitute flavoring; acetoin in two; 2,3-pentanedione in four; 2,3-hexanedione in one; and 2,3-heptanedione in three. Among material safety data sheets (MSDS) for four flavorings, only one listed a hazardous ingredient, which was acetoin. The predominant flavoring ingredient identified in the headspace of the substitute flavoring was 2,3-pentanedione; all other chemicals noted above were also present. Diacetyl and 2,3-pentanedione were measured in workplace air via evacuated canisters. In one area and one personal air sample, 2,3-pentanedione was measured by OSHA Method 1013 at concentrations of 78 and 91 ppb, respectively. Without their or the employer's knowledge, workers who used buttermilk flavorings were exposed to substitute ketones from many flavorings manufacturers. Because 2,3-pentanedione, 2,3-hexanedione, and 2,3-heptanedione all share the same functional α-diketone group as diacetyl, these compounds also may share diacetyl's mechanism of toxicity. Until more is known about 2,3-pentanedione and other α-diketone compounds, they should not be assumed to be safe. Companies using artificial buttermilk flavorings should use a precautionary approach that assumes these flavorings pose a health risk and limit exposures through engineering and administrative controls and use of personal protective equipment. [ABSTRACT FROM AUTHOR]

Diacetyl (2,3-butanedione), a diketone chemical used to impart a buttery taste in many flavoring mixtures, has been associated with bronchiolitis obliterans in several industrial settings. For workplace evaluations in 2000-2006, National Institute for Occupational Safety and Health (NIOSH) investigators used NIOSH Method 2557, a sampling and analytical method for airborne diacetyl utilizing carbon molecular sieve sorbent tubes. The method was subsequently suspected to progressively underestimate diacetyl concentrations with increasing sampling site humidity. Since underestimation of worker exposure may lead to overestimation of respiratory health risk in quantitative exposure-effect analyses, correction of the diacetyl concentrations previously reported with Method 2557 is essential. We studied the effects of humidity and sample storage duration on recovery of diacetyl from experimental air samples taken from a dynamically generated controlled test atmosphere that allowed control of diacetyl concentration, temperature, relative humidity, sampling duration, and sampling flow rate. Samples were analyzed with Method 2557, and results were compared with theoretical test atmosphere diacetyl concentration. After fitting nonlinear models to the experimental data, we found that absolute humidity, diacetyl concentration, and days of sample storage prior to extraction affected diacetyl recovery as did sampling flow rate to a much smaller extent. We derived a mathematical correction procedure to more accurately estimate historical workplace diacetyl concentration based on laboratory-reported concentrations of diacetyl using Method 2557, and sample site temperature and relative humidity (to calculate absolute humidity), as well as days of sample storage prior to extraction in the laboratory. With this correction procedure, quantitative risk assessment for diacetyl can proceed using corrected exposure levels for air samples previously collected and analyzed using NIOSH Method 2557 for airborne diacetyl. [ABSTRACT FROM AUTHOR]

• 3-Methyl-1-cyclopentadecanone; a safety assessment based on RIFM's criteria. • A safety assessment based on 7 human health endpoints plus environmental. • All endpoints were cleared using target data, read-across, and/or TTC. [ABSTRACT FROM AUTHOR]

A response from Maurits de Klepper to the letter to the editor about his article "Foodpairing" in the fall 2011 issue, which discusses food flavor analysis, is presented.

Background: The number of electronic cigarette (e-cigarette) users has been increasing rapidly in recent years, especially among youth and young adults. More e-cigarette products have become available, including e-liquids with various brands and flavors. Various e-liquid flavors have been frequently discussed by e-cigarette users on social media.Objective: This study aimed to examine the longitudinal prevalence of mentions of electronic cigarette liquid (e-liquid) flavors and user perceptions on social media.Methods: We applied a data-driven approach to analyze the trends and macro-level user sentiments of different e-cigarette flavors on social media. With data collected from web-based stores, e-liquid flavors were classified into categories in a flavor hierarchy based on their ingredients. The e-cigarette-related posts were collected from social media platforms, including Reddit and Twitter, using e-cigarette-related keywords. The temporal trend of mentions of e-liquid flavor categories was compiled using Reddit data from January 2013 to April 2019. Twitter data were analyzed using a sentiment analysis from May to August 2019 to explore the opinions of e-cigarette users toward each flavor category.Results: More than 1000 e-liquid flavors were classified into 7 major flavor categories. The fruit and sweets categories were the 2 most frequently discussed e-liquid flavors on Reddit, contributing to approximately 58% and 15%, respectively, of all flavor-related posts. We showed that mentions of the fruit flavor category had a steady overall upward trend compared with other flavor categories that did not show much change over time. Results from the sentiment analysis demonstrated that most e-liquid flavor categories had significant positive sentiments, except for the beverage and tobacco categories.Conclusions: The most updated information about the popular e-liquid flavors mentioned on social media was investigated, which showed that the prevalence of mentions of e-liquid flavors and user perceptions on social media were different. Fruit was the most frequently discussed flavor category on social media. Our study provides valuable information for future regulation of flavored e-cigarettes. [ABSTRACT FROM AUTHOR]

Flavor-consequence learning refers to learned associations between flavor stimuli and post-oral consequences of food that affect food selection, amount eaten and affect. Forms of flavor-consequence learning include flavor aversions, flavor avoidance, conditioned satiety, expected satiety and appetition. Roux-en-Y gastric bypass surgery (RYGB) and other bariatric procedures alter gastrointestinal processing of food in a number of ways. Thus, it is plausible that these procedures alter post-oral unconditioned stimuli that support flavor-consequence learning, leading to altered food selection, amount eaten, and affect. Surprisingly, however, there is almost no research on the role of flavor-consequence learning in the effects of bariatric surgery on appetite. This issue urgently warrants investigation. [ABSTRACT FROM AUTHOR]

Many non-cigarette tobacco products, including e-cigarettes, contain various flavourings, such as fruit flavours. Although many flavourings used in e-cigarettes are generally recognised as safe when used in food products, concerns have been raised about the potential inhalation toxicity of these chemicals. Benzaldehyde, which is a key ingredient in natural fruit flavours, has been shown to cause irritation of respiratory airways in animal and occupational exposure studies. Given the potential inhalation toxicity of this compound, we measured benzaldehyde in aerosol generated in a laboratory setting from flavoured e-cigarettes purchased online and detected benzaldehyde in 108 out of 145 products. The highest levels of benzaldehyde were detected in cherry-flavoured products. The benzaldehyde doses inhaled with 30 puffs from flavoured e-cigarettes were often higher than doses inhaled from a conventional cigarette. Levels in cherry-flavoured products were >1000 times lower than doses inhaled in the workplace. While e-cigarettes seem to be a promising harm reduction tool for smokers, findings indicate that using these products could result in repeated inhalation of benzaldehyde, with long-term users risking regular exposure to the substance. Given the uncertainty surrounding adverse health effects stemming from long-term inhalation of flavouring ingredients such as benzaldehyde, clinicians need to be aware of this emerging risk and ask their patients about use of flavoured e-cigarettes. [ABSTRACT FROM AUTHOR]

The article discusses the unexpected presence of nicotine in electronic cigarette flavorings. Topics covered include the health problems posed by the trend and the popularity of the products to consumers as they can create their own refill fluids. Also mentioned are chemicals used in the flavorings such as glycerol and propylene.

A letter to the editor is presented in response to the article "Foodpairing," by Maurits de Klepper in the fall 2011 issue, which discusses scientific flavor analysis.