Search

The fluorescent properties of cadmium telluride (CdTe) containing quantum dots (QDs) have led to novel products and applications in the ink and pigment industry. The toxic effects of the emissions associated to the use of printing ink containing CdTe QDs might differ from those of conventional formulations which do not integrate nanoparticles, as CdTe QDs might be emitted. Within this work, the airborne emissions of a water-soluble fluorescent ink containing polyethylene glycol (PEG)-coated CdTe QDs of 3-5 nm diameter have been characterized and studied under controlled conditions during household inkjet printing in a scenario simulating the use phase. Subsequently, the cytotoxicological potential of atomized CdTe QDs ink in an acute exposure regimen simulating an accidental, worse-case scenario has been evaluated in vitro at the air-liquid interface (ALI) using the pulmonary cell line BEAS-2B. Endpoints screened included cell viability, oxidative stress and inflammatory effects. We have observed that CdTe QDs ink at 54.7 ng/mL decreased cell viability by 25.6 % when compared with clean air after 1h of exposure; a concentration about 65 times higher was needed to observe a similar effect in submerged conditions. However, we did not observe oxidative stress or inflammatory effects. The present study integrates the development of scenarios simulating the use phase of nano-additivated inks and the direct cell exposure for in vitro effects assessment, thus implementing a life-cycle oriented approach in the assessment of the toxicity of CdTe QDs.

The applicability of the Safe-by-Design (SbD) concept was investigated during development of oxygen carriers (OCs) for Chemical Looping Combustion (CLC) installations; the newly developed OCs are complex, fluidizable metal-oxides. SbD assesses Health Safety and Environmental (HSE) risks at an early stage of product development. Hereto, the impact of the key parameters on safety of future industrial units were estimated with exposure simulations (solid pouring tests and modelling by similarity with commercial refining technology). The likelihood of health effects for workers exposed via inhalation was examined with in vitro tests, showing that particles of Mn-based OC have the potency to initiate an allergic reaction (concentration-dependent increase of cytokines). The manufacturing process showed impact on the ecotoxicological properties of Cu-based OC (EC50 algae

Development of analytical methods for the characterization (particle size determination, chemical identification, and quantification) of the low μm-range microplastics (MPs; 1–10 μm) and nanoplastics (NPs; 1 nm to 1 μm) in air – coarse (PM10

The goal is to optimize and show the validity of an in vitro method for inhalation testing of petroleum substances and their constituents at the air-liquid interface (ALI). The approach is demonstrated in a pilot study with ethylbenzene (EB), a mono-constituent petroleum substance, using a human alveolar epithelial cell line model. This included the development and validation of a generation facility to obtain EB vapors and the optimization of an exposure system for a negative control (clean air, CA), positive control (nitrogen dioxide), and EB vapors. The optimal settings for the VITROCELL (R) 24/48 system were defined. Cytotoxicity, cell viability, inflammation, and oxidative stress were assessed in A549 after exposure to EB vapors. A concentration-dependent significant decrease in mean cell viability was observed after exposure, which was confirmed by a cytotoxicity test. The oxidative stress marker superoxide dismutase 2 was significantly increased, but no concentration-response was observed. A concentration-dependent significant increase in pro-inflammatory markers C-C motif chemokine ligand 2, interleukin (IL)6, and IL8 was observed for EB-exposed A549 cells compared to CA. The data demonstrated consistency between in vivo air concentrations at which adverse respiratory effects were observed and ALI-concentrations affecting cell viability, provided that the actual measured in vitro delivery efficiency of the compound was considered. It can be concluded that extrapolating in vitro air concentrations (adjusted for delivery efficiency and absorption characteristics and applied for testing cell viability) to simulate in vivo air concentrations may be a promising method to screen for acute inhalation toxicity.

The risk assessment, exposure and understanding of the release of embedded carbon nanotubes (CNTs) and carbon nanofibers (CNFs) from commercial high performance composites during machining processes are yet to be fully evaluated and quantified. In this study, CNTs and CNFs were dispersed in epoxy matrix through calendaring process to form nanocomposites. The automated drilling was carried out in a specially designed drilling chamber that allowed elimination of background noise from the measurements. Emission measurements were taken using condensed particle counter (CPC), scanning mobility particle sizer (SMPS) and DMS50 Fast Particulate Size Spectrometer. In comparison to the neat epoxy, the study results revealed that the nano-filled samples produced an increase of 102% and 227% for the EP/CNF and EP/CNT sample respectively in average particle number concentration emission. The particle mass concentration indicated that the EP/CNT and EP/CNF samples released demands a vital new perspective on CNTs and CNFs embedded within nanocomposite materials to be considered and evaluated for occupational exposure assessment. Importantly, the increased concentration observed at 10 nm aerosol particle sizes measurements strongly suggest that there are independent CNTs being released at this range. The work is funded by and part of the European Commission Life project named Simulation of the release of nanomaterials from consumer products for environmental exposure assessment (SIRENA, Pr. No. LIFE 11 ENV/ES/596). We are also thankful to the funding by QualityNano Project through Transnational Access (TA Application VITO-TAF-382 and VITO-TAF-500) under the European Commission, Grant Agreement No: INFRA-2010-262163 for the access and use of the facilities at the Flemish Institute for Technological Research (VITO). The authors would like to acknowledge K. Tirez and R. Persoons at Vito for their XRF and SEM support. Kristof Starost is also thankful for partial funding by the School of Engineering for his studentship.

The aim of this study is to investigate the effect nanosilica and nanoalumina has on nanoparticle release from industrial nanocomposites due to drilling for hazard reduction whilst simultaneously obtaining the necessary mechanical performance. This study is therefore specifically designed such that all background noise is eliminated in the measurements range of 0.01 particles/cm3 and ±10% at 106 particles/cm3. The impact nano-sized SiO2 and Al2O3 reinforced polyester has on nanoparticle aerosols generated due to drilling is investigated. Real-time measurement was conducted within a specially designed controlled test chamber using a condensation particle counter (CPC) and a scanning mobility particle sizer spectrometer (SMPS). The results show that the polyester nanocomposite samples displayed statistically significant differences and an increase in nanoparticle number concentration by up to 228% compared to virgin polyester. It is shown that the nanofillers adhered to the polyester matrix showing a higher concentration of larger particles released (between 20 – 100 nm). The increase in nanoparticle reinforcement weight concentration and resulting nanoparticle release vary considerably between the nanosilica and nanoalumina samples due to the nanofillers presence. This study indicates a future opportunity to safer by design strategy that reduces number of particles released concentration and sizes without compromising desired mechanical properties for engineered polymers and composites. European Commission Life+ project named “Simulation of the release of nanomaterials from consumer products for environmental exposure assessment” (SIRENA, Pr. No. LIFE 11 ENV/ES/596). QualityNano Project through Transnational Access (TA Application VITO-TAF-382 and VITO-TAF-500) under the European Commission, Grant Agreement No: INFRA-2010-262163

In this study, the effect on nanoparticle emissions due to drilling on Polypropylene (PP) reinforced with 20% talc, 5% montmorillonite (MMT) and 5% Wollastonite (WO) is investigated. The study is the first to explore the nanoparticle release from WO and talc reinforced composites and compares the results to previously researched MMT. With 5% WO, equivalent tensile properties with a 10 % weight reduction were obtained relative to the reference 20% talc sample. The materials were fabricated through injection moulding. The nanorelease studies were undertaken using the controlled drilling methodology for nanoparticle exposure assessment developed within the European Commission funded SIRENA Life 11 ENV/ES/506 project. Measurements were taken using CPC and DMS50 equipment for real-time characterization and measurements. The particle number concentration (of particles

A new prototype air-liquid interface (ALI) exposure system, a flatbed aerosol exposure chamber termed NAVETTA, was developed to investigate deposition of engineered nanoparticles (NPs) on cultured human lung A549 cells directly from the gas phase. This device mimics human lung cell exposure to NPs due to a low horizontal gas flow combined with cells exposed at the ALI. Electrostatic field assistance is applied to improve NP deposition efficiency. As proof-of-principle, cell viability and immune responses after short-term exposure to nanocopper oxide (CuO)-aerosol were determined. We found that, due to the laminar aerosol flow and a specific orientation of inverted transwells, much higher deposition rates were obtained compared to the normal ALI setup. Cellular responses were monitored with postexposure incubation in submerged conditions, revealing CuO dissolution in a concentration-dependent manner. Cytotoxicity was the result of ionic and nonionic Cu fractions. Using the optimized inverted ALI/postincubation procedure, pro-inflammatory immune responses, in terms of interleukin (IL)-8 promoter and nuclear factor kappa B (NFκB) activity, were observed within short time, i.e. One hour exposure to ALI-deposited CuO-NPs and 2.5 h postincubation. NAVETTA is a novel option for mimicking human lung cell exposure to NPs, complementing existing ALI systems.

OBJECTIVE: Few epidemiological studies have addressed the health of workers exposed to novel manufactured nanomaterials. The small current workforce will necessitate pooling international cohorts. METHOD: A road map was defined for a globally harmonized framework for the careful choice of materials, exposure characterization, identification of study populations, definition of health endpoints, evaluation of appropriateness of study designs, data collection and analysis, and interpretation of the results. RESULTS: We propose a road map to reach global consensus on these issues. The proposed strategy should ensure that the costs of action are not disproportionate to the potential benefits and that the approach is pragmatic and practical. CONCLUSIONS: We should aim to go beyond the collection of health complaints, illness statistics, or even counts of deaths; the manifestation of such clear endpoints would indicate a failure of preventive measures.

Simultaneous measurements of ultrafine particles (UFPs) were carried out at four sampling locations situated within a 1 km(2) grid area in a Belgian city, Borgerhout (Antwerp). All sampling sites had different orientation and height of buildings and dissimilar levels of anthropogenic activities (mainly traffic volume). The aims were to investigate: (i) the spatio-temporal variation of UFP within the area, (ii) the effect of wind direction with respect to the volume of traffic on UFP levels, and (iii) the spatial representativeness of the official monitoring station situated in the study area. All sampling sites followed similar diurnal patterns of UFP variation, but effects of local traffic emissions were evident. Wind direction also had a profound influence on UFP concentrations at certain sites. The results indicated a clear influence of local weather conditions and the more dominant effect of traffic volumes. Our analysis indicated that the regional air quality monitoring station represented the other sampling sites in the study area reasonably well; temporal patterns were found to be comparable though the absolute average concentrations showed differences of up to 35%. (C) 2012 Elsevier B.V. All rights reserved.

Size-segregated ultrafine particles from motor vehicles were investigated in the Craeybeckx tunnel (E19 motorway, Antwerp, Belgium) at two measurement sites, at 100 and 300 m inside the tunnel, respectively, during March 2008. It was observed that out of the three size modes, nucleation, Aitken, and accumulation, Aitken mode was the most dominant size fraction inside the tunnel. The diurnal variation in ultrafine particle (UFP) levels closely follows the vehicular traffic inside the tunnel, which was maximum during office rush hours, both in the morning and evening and minimum during night-time around 3 am. The tunnel data showed very high growth rates in comparison with free atmosphere. The average condensation sink during the growth period was 14.1-17.3 × 10(-2) s(-1). The average growth rate (GR) of geometric mean diameter was found to be 18.6 ± 2.45 nm h(-1). It was observed that increase in Aitken mode was related to the numbers of heavy-duty vehicles (HDV), as they emit mainly in the Aitken mode. The higher Aitken mode during traffic jams correlated well with HDV numbers. At the end of the tunnel, sudden dilution leading to fast coagulation was responsible for the sudden drop in the UFP number concentration.