Search

Here, we present a rational approach that enhances the membrane selectivity of a prolific pore-forming peptide, melittin, based on experimental observations that the cationic polymer, e-polylysine, disrupts bacterial membranes with greater affinity over mammalian cells when compared to poly-l-lysine and poly-d-lysine. We systematically replaced three α-lysine residues in melittin with e-lysine residues and identified key residues that are important for cytotoxicity. We then assessed the antimicrobial properties of the modified peptides which carry two or three e-lysyl residues. Two modified melittin peptides displayed rapid bactericidal properties against antibiotic-resistant strains, low innate resistance development by pathogenic bacteria, remained nonimmunogenic for T lymphocytes, and increased bioavailability in tear fluids. In proof-of-concept in vivo experiments, one of the peptides was noncytotoxic for ocular surfaces and had comparable antimicrobial efficacy to that of fluoroquinolone antibiotics. The results uncover a simple and potential strategy that can enhance the membrane selectivity of cytolytic peptides by e-lysylation.

Herein, we disclose the first set of unique selenium-containing SLAP (SiLicon Amine Protocol) reagents for the direct synthesis of C3/C5-substituted selenomorpholines and 1,4-selenazepanes from diverse (hetero)aldehydes under mild photocatalytic conditions. Enantiomerically pure 1,2-amino alcohol/α-amino acid versions of these heterocycles were also synthesized. Further, we have shown the late-stage modification of certain biologically active agents using the developed seleno-SLAP reagents.

Increased evolution of multidrug resistant pathogens necessitates the development of multifunctional antimicrobials. There is a perceived need for developing new antimicrobials that can interfere with acute inflammation after bacterial infections. Here, we investigated the therapeutic potential of linear polyethylenimine (LPEI) in vitro and in vivo. The minimum inhibitory concentration of LPEI ranged from 8 to 32 μg/mL and elicited rapid bactericidal activity against clinical isolates of meticillin-resistant Staphylococcus aureus (MRSA). The polymer was biocompatible for human cultured ocular and dermal cells. Prophylactic addition of LPEI inhibited the bacterial colonization of human primary dermal fibroblasts (hDFs). In a scratch wound cell migration assay, LPEI attenuated the migration inhibitory effects of bacterial secretions. The polymer neutralized the cytokine release by hDFs exposed to bacterial secretions, possibly by blocking their accessibility to host cell receptors. Topical instillation of LPEI (1 mg/mL) was noncytotoxic and did not affect the re-epithelialization of injured porcine cornea. In a prophylactic in vivo model of S. aureus keratitis, LPEI was superior to gatifloxacin in terms of reducing stimulation of cytokines, corneal edema, and overall severity of the infection. These observations demonstrate therapeutic potential of LPEI for antimicrobial prophylaxis.

Contact lens is a major risk factor for microbial keratitis among contact lens wearers. Chemical strategies that can prevent microbial adhesion and biofilm formation are required to improve a wearer's hygiene and safety. Taking advantage of the material-independent properties of a polydopamine (pDA) coating, we investigated the role of covalent/noncovalent interactions of the antimicrobials and pDA in conferring long-term antimicrobial activities. The developed antimicrobial contact lenses not only retain their antibacterial efficiency against different bacterial strains for 2 weeks but also inhibit microbial adhesion and biofilm formation on the lens surfaces. The designed antimicrobial coatings were found to be safe for ocular cell lines. Moreover, the antimicrobial coatings did not affect the functional and surface properties of coated contact lenses. This methodology can be used to protect the contact lenses from microbial contamination for prolonged periods and has the potential to be extended for designing antimicrobial coatings for other medical devices as well.

Bacterial colonization of acute and chronic wounds is often associated with delayed wound healing and prolonged hospitalization. The rise of multi-drug resistant bacteria and the poor biocompatibility of topical antimicrobials warrant safe and effective antimicrobials. Antimicrobial agents that target microbial membranes without interfering with the mammalian cell proliferation and migration hold great promise in the treatment of traumatic wounds. This article reports the utility of superhydrophilic electrospun gelatin nanofiber dressings (NFDs) containing a broad-spectrum antimicrobial polymer, e-polylysine (ePL), crosslinked by polydopamine (pDA) for treating second-degree burns. In a porcine model of partial thickness burns, NFDs promoted wound closure and reduced hypertrophic scarring compared to untreated burns. Analysis of NFDs in contact with the burns indicated that the dressings trap early colonizers and elicit bactericidal activity, thus creating a sterile wound bed for fibroblasts migration and re-epithelialization. In support of these observations, in porcine models of Pseudomonas aeruginosa and Staphylococcus aureus colonized partial thickness burns, NFDs decreased bacterial bioburden and promoted wound closure and re-epithelialization. NFDs displayed superior clinical outcome than standard-of-care silver dressings. The excellent biocompatibility and antimicrobial efficacy of the newly developed dressings in pre-clinical models demonstrate its potential for clinical use to manage infected wounds without compromising tissue regeneration.

We report here structure-property relationship between linear and branched polyethylene imines by examining their antimicrobial activities against wide range of pathogens. Both the polymers target the cytoplasmic membrane of bacteria and yeasts, eliciting rapid microbicidal properties. Using multiscale molecular dynamic simulations, we showed that, in both fully or partially protonated forms LPEI discriminates between mammalian and bacterial model membranes whereas BPEI lacks selectivity for both the model membranes. Simulation results suggest that LPEI forms weak complex with the zwitterionic lipids whereas the side chain amino groups of BPEI sequester the zwitterionic lipids by forming tight complex. Consistent with these observations, label-free cell impedance measurements, cell viability assays and high content analysis indicate that BPEI is cytotoxic to human epithelial and fibroblasts cells. Crosslinking of BPEI onto electrospun gelatin mats attenuate the cytotoxicity for fibroblasts while retaining the antimicrobial activity against Gram-positive and yeasts strains. PEI crosslinked gelatin mats elicit bactericidal activity by contact-mediated killing and durable to leaching for 7 days. The potent antimicrobial activity combined with enhanced selectivity of the crosslinked ES gelatin mats would expand the arsenel of biocides in the management of superficial skin infections. The contact-mediated microbicidal properties may avert antimicrobial resistance and expand the diversity of applications to prevent microbial contamination. Statement of Significance Current commercially available advanced wound dressings are either impregnated with metallic silver or silver salts which have side effects or may not avert antimicrobial resistance. In this article, we have used multidisciplinary approach comprising of computational, chemical and biological methods to understand the antimicrobial properties and biocompatibility of linear (LPEI) and branched (BPEI) polyethylenimines. We then applied this knowledge to develop dual purpose wound dressings containing these polymers, which encourages healing while maintain antimicrobial activity. In addition, the approach can be expanded to rationalize the antimicrobial vs. cytotoxicity of other cationic polymers and the method of crosslinking would enhance their potentials as biocides for advanced materials.

Topical skin and nail fungal infections form the most numerous and widespread among superficial mycoses. Drug eluting electrospun nanofibres have been shown to have immense potential for the topical delivery of antimicrobials. In this article, we investigated the efficacy of lecithin-loaded electrospun polycaprolactone (PCL) fibers containing terbinafine hydrochloride (terbinafine) for applications in superficial mycoses. Electron microscopy studies indicated that addition of lecithin and terbinafine decreased the average diameter of PCL nanofibers, increase in mechanical properties and wettability of the fibre mats. PCL mats containing lecithin and terbinafine displayed pronounced blue photoluminescence and did not affect cell adhesion and biocompatibility for primary human dermal fibroblasts. The drug loaded mats maintained the antifungal efficacy against moulds as well as dermatophytic fungus. Using an ex vivo porcine skin infection model, we showed that the drug-eluting mats resulted in >5 log reduction in the viability of T. mentagrophytes. NRF (Natl Research Foundation, S’pore) MOE (Min. of Education, S’pore) NMRC (Natl Medical Research Council, S’pore) Accepted version

Teixobactin is a highly potent cyclic depsipeptide which kills a broad range of multi-drug resistant, Gram-positive bacteria, such as Methicillin-resistant Staphylococcus aureus (MRSA) without detectable resistance. In this work, we describe the design and rapid synthesis of novel teixobactin analogues containing two cysteine moieties, and the corresponding disulfide-bridged cyclic analogues. These analogues differ from previously reported analogues, such as an Arg10-teixobactin, in terms of their macrocyclic ring size, and feature a disulfide bridge instead of an ester linkage. The new teixobactin analogues were screened against Methicillin-resistant Staphylococcus aureus and Methicillin-sensitive Staphylococcus aureus. Interestingly, one teixobactin analogue containing all l-amino acid building blocks showed antibacterial activity against MRSA for the first time. Our data indicates that macrocyclisation of teixobactin analogues with disulfide bridging is important for improved antibacterial activity. In our work, we have demonstrated the unprecedented use of a disulfide bridge in constructing the macrocyclic ring of teixobactin analogues.

The cyclic depsipeptide, teixobactin, kills a number of Gram-positive bacteria, including methicillin-resistant Staphylococcus aureus (MRSA), and Mycobacterium tuberculosis without detectable resistance. To date, teixobactin is the only molecule in its class that has shown in vivo antibacterial efficacy. In this work, we designed and synthesized 10 new in vivo ready teixobactin analogues. These analogues showed highly potent antibacterial activities against Staphylococcus aureus, MRSA, and vancomycin-resistant enterococci (VRE) in vitro. One analogue, d-Arg4-Leu10-teixobactin, 2, was found to be noncytotoxic in vitro and in vivo. Moreover, topical instillation of peptide 2 in a mouse model of S. aureus keratitis decreased the bacterial bioburden (>99.0% reduction) and corneal edema significantly as compared to untreated mouse corneas. Collectively, our results have established the high therapeutic potential of a teixobactin analogue in attenuating bacterial infections and associated severities in vivo. MOE (Min. of Education, S’pore) NMRC (Natl Medical Research Council, S’pore) Accepted version

The mammalian and microbial cell selectivity of synthetic and biosynthetic cationic polymers has been investigated. Among the polymers with peptide backbones, polymers containing amino side chains display greater antimicrobial activity than those with guanidine side chains, whereas ethylenimines display superior activity over allylamines. The biosynthetic polymer ε-polylysine (εPL) is noncytotoxic to primary human dermal fibroblasts at concentrations of up to 2,000 μg/ml, suggesting that the presence of an isopeptide backbone has greater cell selectivity than the presence of α-peptide backbones. Both εPL and linear polyethylenimine (LPEI) exhibit bactericidal properties by depolarizing the cytoplasmic membrane and disrupt preformed biofilms. εPL displays broad-spectrum antimicrobial properties against antibiotic-resistant Gram-negative and Gram-positive strains and fungi. εPL elicits rapid bactericidal activity against both Gram-negative and Gram-positive bacteria, and its biocompatibility index is superior to those of cationic antiseptic agents and LPEI. εPL does not interfere with the wound closure of injured rabbit corneas. In a rabbit model of bacterial keratitis, the topical application of εPL (0.3%, wt/vol) decreases the bacterial burden and severity of infections caused by Pseudomonas aeruginosa and Staphylococcus aureus strains. In vivo imaging studies confirm that εPL-treated corneas appeared transparent and nonedematous compared to untreated infected corneas. Taken together, our results highlight the potential of εPL in resolving topical microbial infections.

Electrospinning of naturally occurring biopolymers for biological applications requires postspinning cross-linking for endurance in protease-rich microenvironments and prevention of rapid dissolution. The most commonly used cross-linkers often generate cytotoxic byproducts, which necessitate high concentrations or time-consuming procedures. Herein, we report the addition of "safe" catecholamine cross-linkers to collagen or gelatin dope solutions followed by electrospinning yielded junction-containing nanofibrous mats. Subsequent in situ oxidative polymerization of the catecholamines increased the density of soldered junctions and maintained the porous nanofiber architecture. This protocol imparted photoluminescence to the biopolymers, a smooth noncytotoxic coating, and good mechanical/structural stability in aqueous solutions. The utility of our approach was demonstrated by the preparation of durable antimicrobial wound dressings and mineralized osteoconductive scaffolds via peptide antibiotics and calcium chloride (CaCl

Most stromal corneal dystrophies are associated with aggregation and deposition of the mutated transforming growth factor-β induced protein (TGFβIp). The 4th_FAS1 domain of TGFβIp harbors ~80% of the mutations that forms amyloidogenic and non-amyloidogenic aggregates. To understand the mechanism of aggregation and the differences between the amyloidogenic and non-amyloidogenic phenotypes, we expressed the 4th_FAS1 domains of TGFβIp carrying the mutations R555W (non-amyloidogenic) and H572R (amyloidogenic) along with the wild-type (WT). R555W was more susceptible to acidic pH compared to H572R and displayed varying chemical stabilities with decreasing pH. Thermal denaturation studies at acidic pH showed that while WT did not undergo any conformational transition, the mutants exhibited a clear pH-dependent irreversible conversion from αβ conformation to β-sheet oligomers. The β-oligomers of both mutants were stable at physiological temperature and pH. Electron microscopy and dynamic light scattering studies showed that β-oligomers of H572R were larger compared to R555W. The β-oligomers of both mutants were cytotoxic to primary human corneal stromal fibroblast (pHCSF) cells. The β-oligomers of both mutants exhibit variations in their morphologies, sizes, thermal and chemical stabilities, aggregation patterns and cytotoxicities.

Dissecting the complexities of branched peptide-lipopolysaccharides (LPS) interactions provide rationale for the development of non-cytotoxic antibiotic adjuvants. Using various biophysical methods, we show that the branched peptide, B2088, binds to lipid A and disrupts the supramolecular organization of LPS. The disruption of outer membrane in an intact bacterium was demonstrated by fluorescence spectroscopy and checkerboard assays, the latter confirming strong to moderate synergism between B2088 and various classes of antibiotics. The potency of synergistic combinations of B2088 and antibiotics was further established by time-kill kinetics, mammalian cell culture infections model and in vivo model of bacterial keratitis. Importantly, B2088 did not show any cytotoxicity to corneal epithelial cells for at least 96 h continuous exposure or hemolytic activity even at 20 mg/ml. Peptide congeners containing norvaline, phenylalanine and tyrosine (instead of valine in B2088) displayed better synergism compared to other substitutions. We propose that high affinity and subsequent disruption of the supramolecular assembly of LPS by the branched peptides are vital for the development of non-cytotoxic antibiotic adjuvants that can enhance the accessibility of conventional antibiotics to the intracellular targets, decrease the antibiotic consumption and holds promise in averting antibiotic resistance. NRF (Natl Research Foundation, S’pore) ASTAR (Agency for Sci., Tech. and Research, S’pore) NMRC (Natl Medical Research Council, S’pore) Published version

Conformational changes in the envelope proteins of flaviviruses help to expose the highly conserved fusion peptide (FP), a region which is critical to membrane fusion and host cell infection and which represents a significant target for antiviral drugs and antibodies. In principle, extended timescale atomic-resolution simulations may be used to characterize the dynamics of such peptides. However, the resultant accuracy is critically dependent upon both the underlying force field and sufficient conformational sampling. In the present study, we report a comprehensive comparison of three simulation methods and four force fields comprising a total of more than 40 μs of sampling. Additionally, we describe the conformational landscape of the FP fold across all flavivirus family members. All investigated methods sampled conformations close to available X-ray structures, but exhibited differently populated ensembles. The best force field / sampling combination was sufficiently accurate to predict that the solvated peptide fold is less ordered than in the crystallographic state, which was subsequently confirmed via circular dichroism and spectrofluorometric measurements. Finally, the conformational landscape of a mutant incapable of membrane fusion was significantly shallower than wild-type variants, suggesting that dynamics should be considered when therapeutically targeting FP epitopes.

Functionalization of material surfaces can improve their biointegration and bactericidal effect. To expand the biomedical applications of titanium in artificial cornea implantation surgery, titanium alloy substrates were coated with polydopamine and dual bound with recombinant vascular endothelial growth factor (VEGF) and anti-microbial peptide (AMP), SESB2V. Successful chemical binding was assessed with attenuated total reflectance-Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. Coating thickness was assessed by atomic force microscopy. Cellular studies revealed that the functionalized substrates displayed the abilities to enhance primary human corneal fibroblast adhesion, proliferation, and viability. Angiogenesis assay with human mesenchymal stem cells was used to verify the biological functions of immobilized VEGF while bactericidal assay was evaluated for the anti-microbial activities of immobilized SESB2V peptide. We found that the titanium surface that was sequentially functionalized with VEGF and SESB2V had enhanced fibroblast proliferation and anti-microbial properties. The incorporation of such peptides into an artificial cornea implant is important for implant-tissue integration and wound healing. This may improve implant integration and reduce the risk of device infection following artificial cornea implantation.

Conventional patterning of HfO2 as a gate dielectric is a multistep complicated process that involves deposition of oxide, photolithography, and hard mask etching. In order to simplify the process of HfO2 patterning, the authors have developed photo- and electron beam-sensitive spin-coatable HfO2 resists for direct writing. They were prepared by reacting hafnium tert-butoxide with benzoylacetone in n-butanol and were found to be highly stable in air. Fourier transform infrared studies suggest that exposure to radiation results in the gradual removal of organic material from the resist and the enrichment of the resist with inorganics. This makes the exposed resist insoluble in organic solvents such as ethanol, thereby providing high-resolution negative patterns as small as ∼10nm wide. A silicon-on-insulator field effect transistor has been fabricated using sol-gel-derived HfO2 resist as a high-k gate dielectric and characterized over a range of temperatures. At room temperature a relatively high gate leaka...

Taking advantage of the cluster effect observed in multivalent peptides, this work describes antifungal activity and possible mechanism of action of tetravalent peptide (B4010) which carries 4 copies of the sequence RGRKVVRR through a branched lysine core. B4010 displayed better antifungal properties than natamycin and amphotericin B. The peptide retained significant activity in the presence of monovalent/divalent cations, trypsin and serum and tear fluid. Moreover, B4010 is non-haemolytic and non-toxic to mice by intraperitoneal (200 mg/kg) or intravenous (100 mg/kg) routes. S. cerevisiae mutant strains with altered membrane sterol structures and composition showed hyper senstivity to B4010. The peptide had no affinity for cell wall polysaccharides and caused rapid dissipation of membrane potential and release of vital ions and ATP when treated with C. albicans. We demonstrate that additives which alter the membrane potential or membrane rigidity protect C. albicans from B4010-induced lethality. Calcein release assay and molecular dynamics simulations showed that the peptide preferentially binds to mixed bilayer containing ergosterol over phophotidylcholine-cholesterol bilayers. The studies further suggested that the first arginine is important for mediating peptide-bilayer interactions. Replacing the first arginine led to a 2–4 fold decrease in antifungal activities and reduced membrane disruption properties. The combined in silico and in vitro approach should facilitate rational design of new tetravalent antifungal peptides. Published version