Search

The first microbeam irradiation study at the biomedical beamline SYRMEP of the Elettra-Sincrotrone Trieste, the technical setup of the experiment and the results of the associated cell culture study in murine melanoma cells are reported., It has been shown previously both in vitro and in vivo that microbeam irradiation (MBI) can control malignant tumour cells more effectively than the clinically established concepts of broad beam irradiation. With the aim to extend the international capacity for microbeam research, the first MBI experiment at the biomedical beamline SYRMEP of the Italian synchrotron facility ELETTRA has been conducted. Using a multislit collimator produced by the company TECOMET, arrays of quasi-parallel microbeams were successfully generated with a beam width of 50 µm and a centre-to-centre distance of 400 µm. Murine melanoma cell cultures were irradiated with a target dose of approximately 65 Gy at a mean photon energy of ∼30 keV with a dose rate of 70 Gy s−1 and a peak-to-valley dose of ∼123. This work demonstrated a melanoma cell reduction of approximately 80% after MBI. It is suggested that, while a high energy is essential to achieve high dose rates in order to deposit high treatment doses in a short time in a deep-seated target, for in vitro studies and for the treatment of superficial tumours a spectrum in the lower energy range might be equally suitable or even advantageous.

By means of a combined microscopy-, spectroscopy-, and tomography-based approach, we investigated surface and interface defects in metal-polymer heterostacks. The aim was to characterize both morphological and compositional alterations of the surfaces, originating in the physical vapor deposition (PVD) growth methods adopted in the fabrication process. Synchrotron radiation X-ray computed tomography (CT) and scanning electron microscopy (SEM) coupled with energy dispersive X-ray Spectroscopy (EDS) indicate that both chemical contaminations, introduced in the fabrication process, and growth conditions strongly affect the presence of defects. On the basis of our results, we classified the defects into four main families. Interestingly, the faults are mainly located at the metal-polymer interface. Thanks to this study, we have been able to gain a deeper insight into the defects' origins and nature, allowing the identification of the precise production steps involved in the generation of the selected defects.

Tannin-furanic rigid foams are bio-based copolymers of tannin plant extract and furfuryl alcohol, promising candidates to replace synthetic insulation foams, as for example polyurethanes and phenolics, in eco-sustainable buildings thanks to their functional properties, such as lightness of the material and fire resistance. Despite their relevance as environmental-friendly alternatives to petroleum derivatives, many aspects of the polymerization chemistry still remain unclear. One of the open issues is on the spatial heterogeneity of the foam, i.e., whether the foam constituents prevalently polymerize in spatially segregated blocks or distribute almost homogenously in the foam volume. To address this matter, here we propose a multiscale FTIR study encompassing 1D FTIR spectroscopy, 2D FTIR imaging and 3D FTIR micro-tomography (FTIR-μCT) on tannin-furanic rigid foams obtained by varying the synthesis parameters in a controlled way. Thanks to the implementation of the acquisition and processing pipeline of FTIR-μCT, we were able for the first time to demonstrate that the polymer formulations influence the spatial organization of the foam at the microscale and, at the same time, prove the reliability of FTIR-μCT data by comparing 2D FTIR images and the projection of the 3D chemical images on the same plane.

In the case of single-distance propagation-based phase-contrast X-ray computed tomography with synchrotron radiation, the conventional reconstruction pipeline includes an independent 2D phase retrieval filtering of each acquired projection prior to the actual reconstruction. In order to compensate for the limited height of the X-ray beam or the small sensitive area of most modern X-ray photon-counting detectors, it is quite common to image large objects with a multi-stage approach, i.e. several acquisitions at different vertical positions of the sample. In this context, the conventional reconstruction pipeline may introduce artifacts at the margins of each vertical stage. This article presents a modified computational protocol where a post-reconstruction 3D volume phase retrieval is applied. By comparing the conventional 2D and the proposed 3D reconstructions of a large mastectomy specimen (9 cm in diameter and 3 cm in height), it is here shown that the 3D approach compensates for the multi-stage artifacts, it avoids refined projection stitching, and the image quality in terms of spatial resolution, contrast and contrast-to-noise ratio is preserved.

Item does not contain fulltext Breast computed tomography (BCT) is an emerging application of X-ray tomography in radiological practice. A few clinical prototypes are under evaluation in hospitals and new systems are under development aiming at improving spatial and contrast resolution and reducing delivered dose. At the same time, synchrotron-radiation phase-contrast mammography has been demonstrated to offer substantial advantages when compared with conventional mammography. At Elettra, the Italian synchrotron radiation facility, a clinical program of phase-contrast BCT based on the free-space propagation approach is under development. In this paper, full-volume breast samples imaged with a beam energy of 32 keV delivering a mean glandular dose of 5 mGy are presented. The whole acquisition setup mimics a clinical study in order to evaluate its feasibility in terms of acquisition time and image quality. Acquisitions are performed using a high-resolution CdTe photon-counting detector and the projection data are processed via a phase-retrieval algorithm. Tomographic reconstructions are compared with conventional mammographic images acquired prior to surgery and with histologic examinations. Results indicate that BCT with monochromatic beam and free-space propagation phase-contrast imaging provide relevant three-dimensional insights of breast morphology at clinically acceptable doses and scan times.

Histopathological analysis is the current gold standard in breast cancer diagnosis and management, however, as imaging technology improves, the amount of potential diagnostic information that may be demonstrable radiologically should also increase. We aimed to evaluate the potential clinical usefulness of 3-D phase-contrast micro-computed tomography (micro-CT) imaging at high spatial resolutions as an adjunct to conventional histological microscopy. Ten breast tissue specimens, 2 mm in diameter, were scanned at the SYRMEP beamline of the Elettra Synchrotron using the propagation-based phase-contrast micro-tomography method. We obtained $1.2~\mu \text{m}$ pixel size images, which were analyzed and compared with corresponding histological sections examined under light microscopy. To evaluate the effect of spatial resolution on breast cancer diagnosis, scans with four different pixel sizes were also performed. Our comparative analysis revealed that high-resolution images can enable, at a near-histological level, detailed architectural assessment of tissue that may permit increased breast cancer diagnostic sensitivity and specificity when compared with current imaging practices. The potential clinical applications of this method are also discussed.

Here we present the specifications and capabilities of the SYRMEP (SYnchrotron Radiation for MEdical Physics) beamline of the Italian Synchrotron “Elettra” in Trieste. SYRMEP was designed to provide X-ray imaging in an energy range that fits both biomedical research and clinical applications on patients. Additionally, SYRMEP covers a spatial resolution range of 100 μm down to 1 μm (1/50th the width of a human hair) with a comparably wide field-of-view (FOV), which enables studies in large specimens and therefore closes the gap between micro computed tomography (CT) in biomedical research and clinical CT imaging. Moreover, the possible long sample-to-detector distance allows for an effective use of free-propagation phase contrast that increases dose efficacy and soft-tissue contrast. These parameters and their function are further discussed on a set of examples of biomedical applications.

Modern humans have a slow and extended period of childhood growth, but to what extent this ontogenetic pathway was present in Neanderthals is debated. Dental development, linked to the duration of somatic growth across modern primates, is the main source for information about growth and development in a variety of fossil primates, including humans. Studies of Neanderthal permanent teeth report a pace of development either similar to recent humans or relatively accelerated. Neanderthal milk teeth, which form and emerge before permanent teeth, provide an opportunity to determine which pattern was present at birth. Here we present a comparative study of the prenatal and early postnatal growth of five milk teeth from three Neanderthals (120 000–130 000 years ago) using virtual histology. Results reveal regions of their milk teeth formed quickly before birth and over a relatively short period of time after birth. Tooth emergence commenced towards the earliest end of the eruption schedules displayed by extant human children. Advanced dental development is consistent with expectations for Neanderthal infant feeding.

K-edge subtraction (KES) imaging is a technique able to map a specific element such as e.g. a contrast agent within the tissues, by exploiting the sharp rise of its absorption coefficient at the K-edge energy. Whereas mainly explored at synchrotron radiation sources, the energy discrimination properties of modern x-ray photon counting detectors (XPCDs) pave the way for an implementation of single-shot KES imaging with conventional polychromatic sources. In this work we present an x-ray CT imaging system based on the innovative Pixie-III detector and discrete reconstruction. The results reported here show that a reliable automatic localization of Barium (above a certain concentration) is possible with a few dozens of tomographic projections for a volume having an axial slice of 512 [Formula: see text] 512 pixels. The final application is a routine high-fidelity 3D mapping of a specific element ready for further morphological quantification by means of x-ray CT with potential promising applications in vivo.

X-ray Photon Counting Detectors (XPCDs) with thick semiconductor sensors and small pixel sizes suffer from a charge-sharing effect which can induce multiple counts from a single interacting photon. This issue degrades not only the energy resolution, but it also worsens the spatial resolution. Multiple counts can be removed by acting on the discriminator threshold or they can be corrected by means of specific acquisition modalities implemented in the readout electronics. In this paper we present the results of the characterization of the Pixirad-1/Pixie-III device, a XPCD carrying a 650 μ m thick CdTe sensor with a small pixel ( 62 × 62 μ m 2 ). The Pixie-III readout system includes programmable energy thresholds and it implements three acquisition modes: a pure photon counting mode and two modes specially designed to correct charge-sharing effects. The measured energy resolution of the three acquisition modes for different energies are here reported. Moreover, we characterize the imaging performance for different combinations of acquisition modes and thresholds by measuring the presampling Modulation Transfer Function (MTF), the Normalized Noise Power Spectrum (NNPS) and by assessing the Noise Equivalent number of Quanta (NEQ).

To evaluate and compare the image quality of propagation-based phase-contrast computed tomography (PB-CT) using synchrotron radiation and conventional cone-beam breast computed tomography (CBBCT) based on various radiological image quality criteria. Eight excised breast tissue samples of various sizes and containing different lesion types were scanned using PB-CT at a synchrotron facility and using CBBCT at a university-affiliated breast imaging centre. PB-CT scans were performed at two different mean glandular dose (MGD) levels: standard (5.8 mGy) and low (1.5 mGy), for comparison with CBBCT scans at the standard MGD (5.8 mGy). Image quality assessment was carried out using six quality criteria and six independent medical imaging experts in a reading room with mammography workstations. The interobserver agreement between readers was evaluated using intraclass correlation coefficient (ICC), and image quality was compared between the two breast imaging modalities using the area under the visual grading characteristic curve (AUCVGC). Interobserver agreement between the readers showed moderate reliability for five image criteria (ICC: ranging from 0.488 to 0.633) and low reliability for one criterion (image noise) (ICC 0.307). For five image quality criteria (overall quality, perceptible contrast, lesion sharpness, normal tissue interfaces, and calcification visibility), both standard-dose PB-CT images (AUCVGC 0.958 to 1, p ≤ .05) and low dose PB-CT images (AUCVGC 0.785 to 0.834, p ≤ .05) were of significantly higher image quality than standard-dose CBBCT images. Synchrotron-based PB-CT can achieve a significantly higher radiological image quality at a substantially lower radiation dose compared with conventional CBBCT. • PB-CT using synchrotron radiation results in higher image quality than conventional CBBCT for breast imaging. • PB-CT using synchrotron radiation requires a lower radiation dose than conventional CBBCT for breast imaging. • PB-CT can help clinicians diagnose patients with breast cancer.

In-line free propagation phase-contrast synchrotron tomography of the lungs has been shown to provide superior image quality compared with attenuation-based computed tomography (CT) in small-animal studies. The present study was performed to prove the applicability on a human-patient scale using a chest phantom with ventilated fresh porcine lungs. Local areas of interest were imaged with a pixel size of 100 µm, yielding a high-resolution depiction of anatomical hallmarks of healthy lungs and artificial lung nodules. Details like fine spiculations into surrounding alveolar spaces were shown on a micrometre scale. Minor differences in artificial lung nodule density were detected by phase retrieval. Since we only applied a fraction of the X-ray dose used for clinical high-resolution CT scans, it is believed that this approach may become applicable to the detailed assessment of focal lung lesions in patients in the future.

X-ray computed tomography (CT) is now a common technique for the non-destructive structural analysis of ancient manufacts of cultural and historical relevance, providing luthiers, art historians, conservators and restorators with a unique tool for the characterization of musical instruments. The experimental set-up to choose is obviously related to the kind and accuracy of the information to be extracted. Some applications of the technique require to examine extremely small details in selected parts of a violin, as in the evaluation of small cracks and thin patches, or in the characterization of larvae and eggs of wood-destroying insects. Other approaches, on the other hand, require less precise measurements of the size of the violin and its main components. Sometimes the presence of metal parts, such as strings and keys, requires a high dynamic range X-ray detector. Other parameters to be taken into account are related to the general organization of the experiment, such as the time required for the measurement, the distance of the laboratory from the instrument owner, its availability and, of course, the cost of the service.

The aim of this study was to optimise the experimental protocol and data analysis for in-vivo breast cancer x-ray imaging. Results are presented of the experiment at the SYRMEP beamline of Elettra Synchrotron using the propagation-based phase-contrast mammographic tomography method, which incorporates not only absorption, but also x-ray phase information. In this study the images of breast tissue samples, of a size corresponding to a full human breast, with radiologically acceptable x-ray doses were obtained, and the degree of improvement of the image quality (from the diagnostic point of view) achievable using propagation-based phase-contrast image acquisition protocols with proper incorporation of x-ray phase retrieval into the reconstruction pipeline was investigated. Parameters such as the x-ray energy, sample-to-detector distance and data processing methods were tested, evaluated and optimized with respect to the estimated diagnostic value using a mastectomy sample with a malignant lesion. The results of quantitative evaluation of images were obtained by means of radiological assessment carried out by 13 experienced specialists. A comparative analysis was performed between the x-ray and the histological images of the specimen. The results of the analysis indicate that, within the investigated range of parameters, both the objective image quality characteristics and the subjective radiological scores of propagation-based phase-contrast images of breast tissues monotonically increase with the strength of phase contrast which in turn is directly proportional to the product of the radiation wavelength and the sample-to-detector distance. The outcomes of this study serve to define the practical imaging conditions and the CT reconstruction procedures appropriate for low-dose phase-contrast mammographic imaging of live patients at specially designed synchrotron beamlines.

International audience; The identification of the earliest dogs is challenging because of the absence and/or mosaic pattern of morphological diagnostic features in the initial phases of the domestication process. Furthermore, the natural occurrence of some of these characters in Late Pleistocene wolf populations and the time it took from the onset of traits related to domestication to their prevalence remain indefinite. For these reasons, the spatiotemporal context of the early domestication of dogs is hotly debated. Our combined molecular and morphological analyses of fossil canid remains from the sites of Grotta Paglicci and Grotta Romanelli, in southern Italy, attest of the presence of dogs at least 14,000 calibrated years before present. This unambiguously documents one of the earliest occurrence of domesticates in the Upper Palaeolithic of Europe and in the Mediterranean. The genetic affinity between the Palaeolithic dogs from southern Italy and contemporaneous ones found in Germany also suggest that these animals were an important common adjunct during the Late Glacial, when strong cultural diversification occurred between the Mediterranean world and European areas north of the Alps. Additionally, aDNA analyses indicate that this Upper Palaeolithic dog lineage from Italy may have contributed to the genetic diversity of living dogs. Dogs were the first animals domesticated by humans, long before the advent of agriculture 1. Besides occupying a special place in our present day lives, dogs had important functional and symbolic roles throughout human history. However, the spatiotemporal context of their early domestication is debated from both archaeological and genetic perspectives: there is scant consensus on the location of first domestication centres, and the presence of one or more domestication events 1-5 , as well as a debate on the correct identification of the oldest archaeological specimens considered to represent dogs 6-11. Latest genetic models suggest the presence of dogs in Europe at least 15,000 years ago, and a divergence between dogs and wolves between about 20,000 and 40,000 years ago 5,12. Earlier potential dog domestication attempts may be represented by canid remains from Northern and Eastern Europe, and Russia 6-9,13-15 , even if their attribution to dogs or wolves is debated 5,10,16-20. The earliest archaeological specimens unequivocally attributed to dogs lived around 16,000 years ago 21-23 , and were related to Magdalenian contexts in Western Europe. Available genetic evidence suggests that the domestication process open 1

The vertical intensity distribution of synchrotron-based X-ray beams usually has a Gaussian profile encompassing large intensity variations. For biomedical imaging applications this may entail sub-optimal dose distributions and large fluctuations in terms of image noise. Commonly, planar metallic filters coupled with absorbing slits systems are applied to adjust the delivered flux and to limit intensity variations, respectively. The latter results in a reduction of the effective beam size. A flattening filter that counterbalances the transverse inhomogeneity, while retaining a sufficient flux, has been developed in the context of a monochromatic phase-contrast breast computed tomography application, ongoing at the Elettra synchrotron facility. The implementation of the new filtration system results in homogeneous intensity (hence dose) distribution and signal-to-noise ratio across the imaged volume. Finally, and most importantly, it allows a wider portion of the beam to be used, directly translating into a major (∼40%) reduction of the overall scan time for samples requiring a field of view larger than the beam size (i.e. multiple translation steps).

In this study we demonstrate the first direct comparison between synchrotron x-ray propagation-based CT (PB-CT) and cone-beam breast-CT (CB-CT) on human mastectomy specimens (N = 12) including different benign and malignant lesions. The image quality and diagnostic power of the obtained data sets were compared and judged by two independent expert radiologists. Two cases are presented in detail in this paper including a comparison with the corresponding histological evaluation. Results indicate that with PB-CT it is possible to increase the level of contrast-to-noise ratio (CNR) keeping the same level of dose used for the CB-CT or achieve the same level of CNR reached by CB-CT at a lower level of dose. In other words, PB-CT can achieve a higher diagnostic potential compared to the commercial breast-CT system while also delivering a considerably lower mean glandular dose. Therefore, we believe that PB-CT technique, if translated to a clinical setting, could have a significant impact in improving breast cancer diagnosis.

About 20 Late Copper Age bowls with cross-shaped foots from Deschmann’s pile dwellings (Ljubljansko barje, central Slovenia) and Trieste Karst (North-Eastern Italy) have been investigated using X-ray computed microtomography (microCT) in order to study the vessel-forming technique, to characterise their pastes and to test the hypothesis that some Karst bowls could have been imported from nowadays central Slovenia or even more distant regions. In three selected virtual slices per sample, clay, lithic inclusions and pores have been segmented and quantified. In addition, the area, maximum length and width of each lithic inclusion have been calculated. Then, the microCT-derived results have been statistically analysed by principal component analysis (PCA). The orientation of pores and disjunctions in microCT volumes show that the basins of the bowls were built using mainly the coiling technique, while the base was shaped starting from a central piece, to which a layer of clay was added and then reshaped in order to produce the foots. The Slovenian bowls include both medium/coarse-grained and very fine- or fine-grained vessels mainly tempered with carbonate inclusions. The pastes of the Karst bowls are considerably heterogeneous. One bowl was most likely imported to the Karst but not from central Slovenia as it shows peculiar components, shape and decoration. The other two imported vessels show a very fine-grained paste comparable to the one of several samples from Deschmann’s pile dwellings. Such technological similarity is confirmed by PCA of microCT data and petrographic observations. Our study confirms the existence of strong cultural connections between central Slovenia and the northernmost Adriatic coast during the Late Copper Age.

X-ray spectral computed microtomography (µ-CT) has gained considerable interest in recent years thanks to the development of Photon Counting X-ray Detectors (PCXDs). Through the energy-based discrimination of the photons, obtained by setting up the discriminator threshold at different levels, PCXDs allow measuring photon energies with an accuracy appropriate for several practical applications. The major potentials of this approach are multiple contrast images (sometimes referred to as “color” or “spectral” images), obtained by using a single polychromatic source. In contrast to multiple acquisitions with different tube spectra, photon-counting spectral CT eliminates the risk of misregistration due to motion between consecutive scans and it allows for the elimination of dark noise in the image by rejecting all the events below the signal threshold. Of particular importance is the application of spectral CT in preclinical models where small animals are scanned and an effective discrimination among e.g. soft-tissue, bone and K-edge contrast agents can be in principle performed in a single shot. While spectral CT is considered very promising, its practical application has been hampered by the charge sharing issue that negatively affects the energy resolution of PCXDs. However, latest generations of PCXDs implement solutions to cope with the charge sharing effects, thus allowing sharp color sensitivity. This work presents a comparison of K-edge spectral CT images acquired with the Pixirad-I/Pixie-III detector with and without the application of a charge sharing recovery solution. When a solution for the charge sharing issue is considered both the spatial accuracy and energy resolution are preserved, thus allowing accurate K-edge subtraction imaging.

Computed x-ray phase contrast micro-tomography is the most valuable tool for a three dimensional (3D) and non destructive analysis of the tissue engineered bone morphology. We used a Talbot interferometer installed at SYRMEP beamline of the ELETTRA synchrotron (Trieste, Italy) for a precise 3D reconstruction of both bone and soft connective tissue, regenerated in vivo within a porous scaffold. For the first time the x-ray tomographic reconstructions have been combined with x-ray scanning micro-diffraction measurement on the same sample, in order to give an exhaustive identification of the different tissues participating to the biomineralization process. As a result, we were able to investigate in detail the different densities in the tissues, distinguishing the 3D organization of the amorphous calcium phosphate from the collagen matrix. Our experimental approach allows for a deeper understanding of the role of collagen matrix in the organic-mineral transition, which is a crucial issue for the development of new bio-inspired composites.

Photon counting semiconductor detectors in radiation imaging present attractive properties, such as high efficiency, low noise, and energy sensitivity. The very complex electronics limits the sensitive area of current devices to a few square cm. This disadvantage is often compensated by tiling a larger matrix with an adequate number of detector units but this usually results in non-negligible insensitive gaps between two adjacent modules. When considering the case of Computed Tomography (CT), these gaps lead to degraded reconstructed images with severe streak and ring artifacts. This work presents two digital image processing solutions to fill in these gaps when considering the specific case of synchrotron radiation x-ray parallel beam phase contrast CT. While not discussed with experimental data, other CT modalities, such as spectral, cone beam and other geometries might benefit from the presented approaches.

X-ray phase imaging has the potential to dramatically improve soft tissue contrast sensitivity, which is a crucial requirement in many diagnostic applications such as breast imaging. In this context, a program devoted to perform in vivo phase-contrast synchrotron radiation breast computed tomography is ongoing at the Elettra facility (Trieste, Italy). The used phase-contrast technique is the propagation-based configuration, which requires a spatially coherent source and a sufficient object-to-detector distance. In this work the effect of this distance on image quality is quantitatively investigated scanning a large breast surgical specimen at three object-to-detector distances (1.6, 3, 9 m) and comparing the images both before and after applying the phase-retrieval procedure. The sample is imaged at 30 keV with a [Formula: see text] pixel pitch CdTe single-photon-counting detector, positioned at a fixed distance of 31.6 m from the source. The detector fluence is kept constant for all acquisitions. The study shows that, at the largest distance, a 20-fold SNR increase can be obtained by applying the phase-retrieval procedure. Moreover, it is shown that, for phase-retrieved images, changing the object-to-detector distance does not affect spatial resolution while boosting SNR (four-fold increase going from the shortest to the largest distance). The experimental results are supported by a theoretical model proposed by other authors, whose salient results are presented in this paper.

Rationale and Objectives This study employs clinical/radiological evaluation in establishing the optimum imaging conditions for breast cancer imaging using the X-ray propagation-based phase-contrast tomography. Materials and Methods Two series of experiments were conducted and in total 161 synchrotron-based computed tomography (CT) reconstructions of one breast mastectomy specimen were produced at different imaging conditions. Imaging factors include sample-to-detector distance, X-ray energy, CT reconstruction method, phase retrieval algorithm applied to the CT projection images and maximum intensity projection. Observers including breast radiologists and medical imaging experts compared the quality of the reconstructed images with reference images approximating the conventional (absorption) CT. Various radiological image quality attributes in a visual grading analysis design were used for the radiological assessments. Results The results show that the application of the longest achievable sample-to-detector distance (9.31 m), the lowest employed X-ray energy (32 keV), the full phase retrieval, and the maximum intensity projection can significantly improve the radiological quality of the image. Several combinations of imaging variables resulted in images with very high-quality scores. Conclusion The results of the present study will support future experimental and clinical attempts to further optimize this innovative approach to breast cancer imaging.

X-ray phase-contrast imaging (XPCI) can extend the capabilities of conventional radiography and, by exploiting phase effects, make visible those details that lack enough absorption contrast [1]. Several approaches have been proposed for XPCI by using synchrotron radiation, microfocal and extended labortory sources [2]. We focus here on edge illumination [3] in view of its properties of high resolution, sensitivity, robustness and achromaticity [4-6]. The latter is of particular interest for the study reported here, where we used the direct beam from a bending magnet, aiming at making use of a spectral distribution as broad as possible.

Item does not contain fulltext Two dosimetric quantities [mean glandular dose (MGD) and entrance surface air kerma (ESAK)] and the diagnostic performance of phase-contrast mammography with synchrotron radiation (MSR) are compared to conventional digital mammography (DM). Seventy-one patients (age range, 41 to 82 years) underwent MSR after a DM examination if questionable or suspicious breast abnormalities were not clarified by ultrasonography. The MGD and the ESAK delivered in both examinations were evaluated and compared. Two on-site radiologists rated the images in consensus according to the Breast Imaging Reporting and Data System assessment categories, which were then correlated with the final diagnoses by means of statistical generalized linear models (GLMs). Receiver operating characteristic curves were also used to assess the diagnostic performance by comparing the area under the curve (AUC). An important MGD and ESAK reduction was observed in MSR due to the monoenergetic beam. In particular, an average 43% reduction was observed for the MGD and a reduction of more than 50% for the ESAK. GLM showed higher diagnostic accuracy, especially in terms of specificity, for MSR, confirmed by AUC analysis ([Formula: see text]). The study design implied that the population was characterized by a high prevalence of disease and that the radiologists, who read the DM images before referring the patient to MSR, could have been influenced in their assessments. Within these limitations, the use of synchrotron radiation with the phase-contrast technique applied to mammography showed an important dose reduction and a higher diagnostic accuracy compared with DM. These results could further encourage research on the translation of x-ray phase-contrast imaging into the clinics.

International audience; The penecontemporaneous Middle Pleistocene sites of Fontana Ranuccio (Latium) and Visogliano (Friuli-Venezia Giulia), set c. 450 km apart in central and northeastern Italy, respectively, have yielded some among the oldest human fossil remains testifying to a peopling phase of the Italian Peninsula broadly during the glacial MIS 12, a stage associated with one among the harshest climatic conditions in the Northern hemisphere during the entire Quaternary period. Together with the large samples from Atapuerca Sima de los Huesos, Spain, and Caune de l’Arago at Tautavel, France, the remains from Fontana Ranuccio and Visogliano are among the few mid-Middle Pleistocene dental assemblages from Western Europe available for investigating the presence of an early Neanderthal signature in their inner structure. We applied two- three-dimensional techniques of virtual imaging and geometric morphometrics to the high-resolution X-ray microtomography record of the dental remains from these two Italian sites and compared the results to the evidence from a selected number of Pleistocene and extant human specimens/samples from Europe and North Africa. Depending on their preservation quality and on the degree of occlusal wear, we comparatively assessed: (i) the crown enamel and radicular dentine thickness topographic variation of a uniquely represented lower incisor; (ii) the lateral crown tissue proportions of premolars and molars; (iii) the enamel-dentine junction, and (iv) the pulp cavity morphology of all available specimens. Our analyses reveal in both samples a Neanderthal-like inner structural signal, for some aspects also resembling the condition shown by the contemporary assemblage from Atapuerca SH, and clearly distinct from the recent human figures. This study provides additional evidence indicating that an overall Neanderthal morphological dental template was preconfigured in Western Europe at least 430 to 450 ka ago.

The fetal remains from the Ostuni 1 burial (Italy, ca 27 ka) represent a unique opportunity to explore the prenatal biological parameters, and to reconstruct the possible patho-biography, of a fetus (and its mother) in an Upper Paleolithic context. Phase-contrast synchrotron X-ray microtomography imaging of two deciduous tooth crowns and microfocus CT measurements of the right hemimandible of the Ostuni 1b fetus were performed at the SYRMEP beamline and at the TomoLab station of the Elettra - Sincrotrone laboratory (Trieste, Italy) in order to refine age at death and to report the enamel developmental history and dental tissue volumes for this fetal individual. The virtual histology allowed to estimate the age at death of the fetus at 31–33 gestational weeks. Three severe physiological stress episodes were also identified in the prenatal enamel. These stress episodes occurred during the last two months and half of pregnancy and may relate to the death of both individuals. Compared with modern prenatal standards, Os1b’s skeletal development was advanced. This cautions against the use of modern skeletal and dental references for archaeological finds and emphasizes the need for more studies on prenatal archaeological skeletal samples.

The Ceprano calvarium was discovered in fragments on March 1994 near the town of Ceprano in southern Latium (Italy), embedded in Middle Pleistocene layers. After reconstruction, its morphological features suggests that the specimen belongs to an archaic variant of H. heidelbergensis, representing a proxy for the last common ancestor of the diverging clades that respectively led to H. neanderthalensis and H. sapiens. Unfortunately, the calvarium was taphonomically damaged. The postero-lateral vault, in particular, appears deformed and this postmortem damage may have influenced previous interpretations. Specifically, there is a depression on the fragmented left parietal, while the right cranial wall is warped and angulated. This deformation affected the shape of the occipital squama, producing an inclination of the transverse occipital torus. In this paper, after X-ray microtomography (μCT) of both the calvarium and several additional fragments, we analyze consistency and pattern of the taphonomic deformation that affected the specimen, before the computer-assisted retrodeformation has been performed; this has also provided the opportunity to reappraise early attempts at restoration. As a result, we offer a revised interpretation for the Ceprano calvarium’s original shape, now free from the previous uncertainties, along with insight for its complex depositional and taphonomic history.