Search

Type 1 copper proteins have a conserved ligand set of one cysteine and two histidines, with many proteins, such as azurin, also containing an axial methionine. While the cysteine and methionine in azurin have been replaced with their respective isostructural analogues of unnatural amino acids to reveal their roles in tuning electronic structures and functional properties, such as reduction potentials (E°'), the histidine ligands have not been probed in this way. We herein report the substitution of His117 in azurin with three unnatural isostructural analogues, 5-nitrohistidine(Ntr), thiazolylalanine(SHis) and 1-methylhistidine(MeH) by expressed protein ligation. While UV-vis absorption and electron paramagnetic resonance spectroscopies confirm that isostructural replacement results in minimal structural change in the Cu(II) state, the E°' of these variants increases with increasing pKa of the δ nitrogens of the imidazole. This counter-intuitive relationship between E°' of the protein and pKa of the sidechain group suggests additional factors may play a role in tuning E°'.

Two questions important to the success in metalloenzyme design are how to attach or anchor metal cofactors inside protein scaffolds and in what way such positioning affects enzymatic properties. We have previously reported a dual anchoring method to position a nonnative cofactor, MnSalen (1), inside the heme cavity of apo sperm whale myoglobin (Mb) and showed that the dual anchoring can increase both the activity and enantioselectivity over single anchoring methods, making this artificial enzyme an ideal system to address the above questions. Here, we report systematic investigations of the effect of different covalent attachment or anchoring positions on reactivity and selectivity of sulfoxidation by the MnSalen-containing Mb enzymes. We have found that changing the left anchor from Y103C to T39C has an almost identical effect of increasing rate by 1.8-fold and increasing selectivity by +15% for S, whether the right anchor is L72C or S108C. At the same time, regardless of the identity of the left anchor,...

To demonstrate protein modulation of metal-cofactor reactivity through noncovalent interactions, pH-dependent sulfoxidation and 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulphonic acid) (ABTS) oxidation reactivity of a designed myoglobin (Mb) containing non-native Mn-salen complex (1) was investigated using H2O2 as the oxidant. Incorporation of 1 inside the Mb resulted in an increase in the turnover numbers through exclusion of water from the metal complex and prevention of Mn-salen dimer formation. Interestingly, the presence of protein in itself is not enough to confer the increase activity as mutation of the distal His64 in Mb to Phe to remove hydrogen-bonding interactions resulted in no increase in the turnover numbers, while mutation His64 to Arg, another residue with ability to hydrogen-bond interactions, resulted in an increase in reactivity. These results strongly suggest that the distal ligand His64, through its hydrogen-bonding interaction, plays important roles in enhancing and fine-tuning reactivity of the Mn-salen complex. Nonlinear least-squares fitting of rate versus pH plots demonstrates that 1.Mb(H64X) (X=H, R and F) and the control Mn-salen 1 exhibit pKa values varying from pH 6.4 to 8.3, and that the lower pKa of the distal ligand in 1.Mb(H64X), the higher the reactivity it achieves. Moreover, in addition to the pKa at high pH, 1.Mb displays another pKa at low pH, with pKa of 5.0+/-0.08. A comparison of the effect of different pH on sulfoxidation and ABTS oxidation indicates that, while the intermediate produced at low pH conditions could only perform sulfoxidation, the intermediate at high pH could oxidize both sulfoxides and ABTS. Such a fine-control of reactivity through hydrogen-bonding interactions by the distal ligand to bind, orient and activate H2O2 is very important for designing artificial enzymes with dramatic different and tunable reactivity from catalysts without protein scaffolds.

The cupredoxin fold is an important motif in numerous proteins that are central to several critical cellular processes ranging from aerobic and anaerobic respiration to catalysis and iron homeostasis. Three types of copper sites have been found to date within cupredoxin folds: blue type 1 (T1) copper, red type 2 (T2) copper, and purple Cu A . Although as much as 90% sequence difference has been observed among some members of this superfamily of proteins that span several kingdoms, sequence alignment and phylogenic trees strongly suggest an evolutionary link and common ancestry. However, experimental evidence for such a link has been lacking. We report herein the observation of pH-dependent transformation between blue T1 copper, red T2 copper, and the native purple Cu A centers of nitrous oxide reductase (N 2 OR) from Paracoccus denitrificans . The blue and red copper centers form initially before they are transformed into purple Cu A center. This transformation process is pH-dependent, with lower pH resulting in fewer trapped T1 and T2 coppers and faster transition to purple Cu A . These observations suggest that the purple Cu A site contains the essential elements of T1 and T2 copper centers and that the Cu A center is preferentially formed at low pH. Therefore, this work provides an underlying link between the various cupredoxin copper sites and possible experimental evidence in vitro for the evolutionary relationship between the cupredoxin proteins. The findings also lend physiological relevance to cupredoxin site biosynthesis.

Using a combination of electronic spectroscopies and DFT calculations, the effect of pH perturbation on the geometric and electronic structure of the CuA site has been defined. Descriptions are developed for high pH (pH = 7) and low pH (pH = 4) forms of CuA azurin and its H120A mutant which address the discrepancies concerning the extent of delocalization indicated by multifrequency EPR and ENDOR data (J. Am. Chem. Soc. 2005, 127, 7274; Biophys. J. 2002, 82, 2758). Our resonance Raman and MCD spectra demonstrate that the low pH and H120A mutant forms are essentially identical and are the perturbed forms of the completely delocalized high pH CuA site. However, in going from high pH to low pH, a seven-line hyperfine coupling pattern associated with complete delocalization of the electron (S = 1/2) over two Cu coppers (I(Cu) = 3/2) changes into a four-line pattern reflecting apparent localization. DFT calculations show that the unpaired electron is delocalized in the low pH form and reveal that its four-line hyperfine pattern results from the large EPR spectral effects of approximately 1% 4s orbital contribution of one Cu to the ground-state spin wave function upon protonative loss of its His ligand. The contribution of the Cu-Cu interaction to electron delocalization in this low symmetry protein site is evaluated, and the possible functional significance of the pH-dependent transition in regulating proton-coupled electron transfer in cytochrome c oxidase is discussed.

The conserved axial ligand methionine 121 from Pseudomonas aeruginosa azurin (Az) has been replaced by isostructural unnatural amino acid analogues, oxomethionine (OxM), difluoromethionine (DFM), trifluoromethionine (TFM), selenomethionine (SeM), and norleucine (Nle) using expressed protein ligation. The replacements resulted in6 nm shifts in the S(Cys)-Cu charge transfer (CT) band in the electronic absorption spectra and8 gauss changes in the copper hyperfine coupling constants (AII) in the X-band electron paramagnetic resonance spectra, suggesting that isostructural replacement of Met resulted in minimal structural perturbation of the copper center. The slight blue shifts of the CT band follow the trend of stronger electronegativity of the ligands. This trend is supported by 19F NMR studies of the fluorinated methionine analogues. However, the order of AII differs, suggesting additional factors influencing AII. In contrast to the small changes in the UV-vis and EPR spectra, a large variation of227 mV in reduction potential was observed for the series of variants reported here. Additionally, a linear correlation was established between the reduction potentials and hydrophobicity of the variants. Extension of this analysis to other type 1 copper-containing proteins reveals a linear correlation between change in hydrophobicity and change in reduction potential, independent of the protein scaffold, experimental conditions, measurement techniques, and steric modifications. This analysis has also revealed for the first time high and low potential states for type 1 centers, and the difference may be attributable to destabilization of the protein fold by disruption of hydrophobic or hydrogen bonding interactions that stabilize the type 1 center.

Redox processes are at the heart of numerous functions in chemistry and biology, from long-range electron transfer (ET) in photosynthesis and respiration to catalysis in industrial and fuel cell research. Nature accomplishes these functions by employing only a limited number of redox-active agents. A long-standing issue in these fields is how redox potentials are fine-tuned over a broad range with little change to the redox-active site or ET properties. Resolving this issue will not only advance our fundamental understanding of the roles of long-range, non-covalent interactions in redox processes, but also allow for design of redox-active proteins having tailor-made redox potentials for applications such as artificial photosynthetic centers1,2 or fuel cell catalysts3 for energy conversion. We have shown here that two important secondary coordination sphere interactions, hydrophobicity and hydrogen-bonding, are capable of tuning the reduction potential of the cupredoxin azurin (Az) over a 700 mV range, surpassing the highest and lowest reduction potentials reported for any mononuclear cupredoxin, without perturbing the metal binding site beyond what is typical for the cupredoxin family of proteins. We also demonstrate that the effects of individual structural features are additive and that redox potential tuning of Az is now predictable across the full range of cupredoxin potentials.

Engineering of artificial metalloproteins is an expanding field with potential impacts in many areas from fundamental understanding of protein structure and function to industrial production of specialty chemicals such as chiral drug intermediates. Incorporation of unnatural amino acids and non-native metal cofactors into proteins is an emerging field in the area of protein design, as it offers the tantalizing prospect of introducing new functionality and provides exquisite probes for and fine-tuning of native protein properties. Although it is a relatively young field, engineering of non-native metalloproteins boasts a myriad of techniques for design, construction, and/or expression of the desired artificial protein. Additionally, many groundbreaking studies exist in this field that have enhanced basic scientific understanding of protein function or generated promising artificial enzymes. Discussion of the techniques prominent for incorporation of unnatural amino acids and non-native cofactors is followed by some of the most interesting applications of these techniques reported to date.

We demonstrate that incorporation of MnSalen into a protein scaffold enhances the chemoselectivity in sulfoxidation of thioanisole and found that both the polarity and hydrogen bonding of the protein scaffold play an important role in tuning the chemoselectivity.

Introducing nonnative metal ions or metal-containing prosthetic groups into a protein can dramatically expand the repertoire of its functionalities and thus its range of applications. Particularly challenging is the control of substrate-binding and thus reaction selectivity such as enantioselectivity. To meet this challenge, both non-covalent and single-point attachments of metal complexes have been demonstrated previously. Since the protein template did not evolve to bind artificial metal complexes tightly in a single conformation, efforts to restrict conformational freedom by modifying the metal complexes and/or the protein are required to achieve high enantioselectivity using the above two strategies. Here we report a novel site-selective dual anchoring (two-point covalent attachment) strategy to introduce an achiral manganese salen complex (Mn(salen)), into apo sperm whale myoglobin (Mb) with bioconjugation yield close to 100%. The enantioselective excess increases from 0.3% for non-covalent, to 12.3% for single point, and to 51.3% for dual anchoring attachments. The dual anchoring method has the advantage of restricting the conformational freedom of the metal complex in the protein and can be generally applied to protein incorporation of other metal complexes with minimal structural modification to either the metal complex or the protein.

The synthesis and properties of mononuclear zinc methoxide ([(ebnpa)Zn-OCH3]ClO4) (1) and hydroxide ([(ebnpa)Zn-OH]ClO4) (2) complexes of a new mixed nitrogen/sulfur ligand (ebnpa = N-2-(ethylthio)ethyl-N,N-bis(6-neopentylamino-2-pyridylmethyl)amine) are reported. The structures of 1 and 2 were determined by X-ray diffraction. Each possesses a single zinc-coordinated anion (methoxide or hydroxide) and exhibits an overall trigonal bipyramidal geometry. Structural and spectroscopic studies indicate the presence of two hydrogen-bonding interactions involving the oxygen atom of the zinc-bound anion in each complex. Treatment of [(ebnpa)Zn-OH]ClO4 with CH3OH results in the formation of an equilibrium mixture of 1 and 2. 1H NMR spectroscopic methods were used to examine the equilibrium as a function of temperature, yielding KMe (304 K) = 0.30(8), DeltaHMe = -0.9(1) kcal/mol, and DeltaSMe = -5(1) eu. The negative enthalpy indicates that spontaneous zinc alkoxide formation from a hydroxide precursor occurs in this system at low temperature. Using the experimentally determined DeltaHMe value, we found the homolytic Zn-O bond dissociation energy (BDE) in the Zn-OCH3 unit to be approximately -14 kcal/mol relative to the Zn-O BDE in the Zn-OH unit.

Treatment of a dinuclear zinc hydroxide complex ([(bmnpaZn)(2)(mu-OH)(2)](ClO(4))(2) (1) or [(benpaZn)(2)(mu-OH)(2)](ClO(4))(2) (2)) with excess equivalents of an aryl alcohol derivative (p-HOC(6)H(4)X; X = NO(2), CHO, CN, COCH(3), Br, H, OCH(3)) yielded the nitrogen/sulfur-ligated zinc aryloxide complexes [(bmnpa)Zn(p-OC(6)H(4)NO(2))](ClO(4)) (3), [(benpa)Zn(p-OC(6)H(4)NO(2))](ClO(4)) (4), [(benpa)Zn(p-OC(6)H(4)CHO)](ClO(4)) (5), [(benpa)Zn(p-OC(6)H(4)CN)](ClO(4)) (6), [(benpa)Zn(p-OC(6)H(4)COCH(3))](ClO(4)) x 0.5H(2)O (7), [(benpa)Zn(p-OC(6)H(4)Br)](ClO(4)) (8), [(benpa)Zn(p-OC(6)H(5))](ClO(4)) (9), and [(benpa)Zn(p-OC(6)H(5)OCH(3))](ClO(4)) (10). The solid state structures of 2, 3, 5, and 6 have been determined by X-ray crystallography. While 3 and 6 exhibit a mononuclear zinc ion possessing a distorted five-coordinate trigonal bipyramidal geometry, in 5 each zinc center exhibits a distorted six-coordinate octahedral geometry resulting from coordination of the aldehyde carbonyl oxygen of another zinc-bound aryloxide ligand, yielding a chain-type structure. Zinc coordination of the aldehyde carbonyl of 5 is indicated by a large shift (40 cm(-)(1)) to lower energy of the carbonyl stretching vibration (nu(C[double bond]O) in solid state FTIR spectra of the complex. In the solid state structures of 3, 5, and 6, a hydrogen-bonding interaction is found between N(3)-H of the supporting bmnpa/benpa ligand and the zinc-bound oxygen atom of the aryloxide ligand (N(3)...O(1) approximately 2.78 A). Solution (1)H and (13)C NMR spectra of 3-10 in CD(3)CN and FTIR spectra in CH(3)CN are consistent with all of the aryloxide complexes having a similar solution structure, with retention of the hydrogen-bonding interaction involving N(3)-H and the oxygen atom of the zinc-coordinated aryloxide ligand. For this family of zinc aryloxide complexes, a correlation was discovered between the chemical shift position of the N(3)-H proton resonance and the pK(a) of the parent aryl alcohol. This correlation indicates that the strength of the hydrogen-bonding interaction involving the zinc-bound aryloxide oxygen is increasing as the aryloxide moiety increases in basicity.

The effects of metal ions on the reduction of nitric oxide (NO) with a designed heme copper center in myoglobin (F43H/L29H sperm whale Mb, CuBMb) were investigated under reducing anaerobic conditions using UV-vis and EPR spectroscopic techniques as well as GC/MS. In the presence of Cu(I), catalytic reduction of NO to N2O by CuBMb was observed with turnover number of 2 mol NO.mol CuBMb-1.min-1, close to 3 mol NO.mol enzyme-1.min-1 reported for the ba3 oxidases from T. thermophilus. Formation of a His-heme-NO species was detected by UV-vis and EPR spectroscopy. In comparison to the EPR spectra of ferrous-CuBMb-NO in the absence of metal ions, the EPR spectra of ferrous-CuBMb-NO in the presence of Cu(I) showed less-resolved hyperfine splitting from the proximal histidine, probably due to weakening of the proximal His-heme bond. In the presence of Zn(II), formation of a five-coordinate ferrous-CuBMb-NO species, resulting from cleavage of the proximal heme Fe-His bond, was shown by UV-vis and EPR spectroscopic studies. The reduction of NO to N2O was not observed in the presence of Zn(II). Control experiments using wild-type myoglobin indicated no reduction of NO in the presence of either Cu(I) or Zn(II). These results suggest that both the identity and the oxidation state of the metal ion in the CuB center are important for NO reduction. A redox-active metal ion is required to deliver electrons, and a higher oxidation state is preferred to weaken the heme iron-proximal histidine toward a five-coordinate key intermediate in NO reduction.