Search

This work demonstrates a simple and scalable method for synthesizing porous carbons with high CO2 uptake capacity.

The synthesis of highly water-dispersible iron oxide nanoparticles with surface functional groups and precisely controlled sizes is essential for biomedical application. In this paper, we report a one-pot strategy for versatile surface functionalization. The iron oxide nanoparticles are first synthesized by thermal decomposition of iron(III) acetylacetonate (Fe(acac)3) in diethylene glycol (DEG), and their surfaces are modified by adding the surface ligands at the end of the reaction. The size of iron oxide nanoparticles can be precisely controlled in nanometer scale by continuous growth. This facile synthesis method enables the surface modification with different coating materials such as dopamine (DOPA), polyethylene glycol with thiol end group (thiol-PEG), and poly(acrylic acid) (PAA) onto the iron oxide nanoparticles, introducing new surface functionalities for future biomedical application. From transmission electron microscopy (TEM) and X-ray diffraction (XRD), the morphology and crystal structure are not changed during surface functionalization. The attachment of surface ligands is studied by Fourier transform infrared spectroscopy (FTIR) and Thermogravimetric Analysis (TGA). The surface functional groups are confirmed by X-ray Photoelectron Spectroscopy (XPS). In correlation with the change of hydrodynamic size, PAA coated nanoparticles are found to exhibit outstanding stability in aqueous solution. Furthermore, we demonstrate that the functional groups are available for conjugating with other molecules such as fluorescent dye, showing potential biological applications. Lastly, the magnetic resonance phantom studies demonstrate that iron oxide nanoparticles with PAA coating can be used as T1 and T2 dual-modality contrast agents. Both r1 and r2 relaxivities significantly increase after surface functionalization with PAA, indicating improved sensitivity.

Atomic oxygen (AO) attacks carbon-fiber reinforcing polymers on the surfaces of spacecraft in low Earth orbit and threatens safe spacecraft operation and service life. Incorporating phenylphosphine...

A compressive strain applied to bilayer films (e.g. thin film adhered to a thick substrate) can lead to buckled or wrinkled morphologies, which has many important applications in stretchable electronics, anti-counterfeit technology, and high-precision micro and nano-metrology. A number of buckling-based metrology methods have been developed to quantify the residual stress and viscoelastic properties of polymer thin films. However, in some systems (e.g. solvent-induced swelling or thermal strain), the compressive strain is unknown or difficult to measure. We present a quantitative method of measuring the compressive strain of wrinkled polymer films and coatings with knowledge of the "skin" thickness, wrinkle wavelength, and wrinkle amplitude. The derived analytical expression is validated with a well-studied model system, e.g., stiff, thin film (PS) bonded to a thick, compliant substrate (PDMS). After validation, we use our expression to quantify the applied swelling strain of previously reported wrinkled poly(styrene-alt-maleic anhydride) brush surfaces. Finally, the applied strain is used to rationalize the observed persistence length of aligned wrinkles created during atomic force microscopy (AFM) lithography and subsequent solvent exposure.

We describe the synthesis of pro-antimicrobial networks via degradable acetals (PANDAs) as a new paradigm for sequestration and triggered release of volatile, bioactive aldehydes. PANDAs derived from diallyl p-chlorobenzaldehyde acetal degrade and release p-chlorobenzaldehyde as an antibacterial and antifungal agent under mild conditions (pH 7.4/high humidity). We show that PANDAs enable facile access to materials with tunable release profiles, potent antimicrobial activity without triggering antimicrobial resistance, and minimal cytotoxicity.

We describe the design and synthesis of degradable, dual-release, pro-antimicrobial poly(thioether acetal) networks derived from synergistic pairs of aromatic terpene aldehydes. Initially, we identified pairs of aromatic terpene aldehyde derivatives exhibiting a synergistic antimicrobial activity against Pseudomonas aeruginosa by determining fractional inhibitory concentrations. Synergistic aldehydes were converted into dialkene acetal monomers and copolymerized at various ratios with a multifunctional thiol via thiol–ene photopolymerization. The step-growth nature of the thiol–ene polymerization ensures every cross-link junction contains a degradable acetal linkage enabling a fully cross-linked polymer network to revert into its small molecule constituents upon hydrolysis, releasing the synergistic aldehydes as active antimicrobial compounds. A three-pronged approach was used to characterize the poly(thioether acetal) materials: (i) determination of the degradation/aldehyde release behavior, (ii) evaluat...

Photoinduced thiol-catalyzed hydrogen abstraction and β-scission of acyclic benzylidene acetals is demonstrated as a new route to “command-destruct” polymer thermosets. Using this approach, we show that poly(thioether acetal) networks synthesized via thiol–ene photopolymerization rapidly degrade to alkyl benzoate byproducts when triggered with light, transitioning from solid to liquid within seconds. The light-driven construction and destruction processes, accessible via distinct differences in kinetics, are readily amenable for photopatterning, additive/subtractive manufacturing and wavelength-selective applications.

A compressive strain applied to bilayer films (e.g. thin film adhered to a thick substrate) can lead to buckled or wrinkled morphologies, which has many important applications in stretchable electronics, anti-counterfeit technology, and high-precision micro and nano-metrology. A number of buckling-based metrology methods have been developed to quantify the residual stress and viscoelastic properties of polymer thin films. However, in some systems (e.g. solvent-induced swelling or thermal strain), the compressive strain is unknown or difficult to measure. We present a quantitative method of measuring the compressive strain of wrinkled polymer films and coatings with knowledge of the “skin” thickness, wrinkle wavelength, and wrinkle amplitude. The derived analytical expression is validated with a well-studied model system, e.g., stiff, thin film (PS) bonded to a thick, compliant substrate (PDMS). After validation, we use our expression to quantify the applied swelling strain of previously reported wrinkled poly(styrene-alt-maleic anhydride) brush surfaces. Finally, the applied strain is used to rationalize the observed persistence length of aligned wrinkles created during atomic force microscopy (AFM) lithography and subsequent solvent exposure.

Thiol–ene photopolymerization was exploited for the synthesis of poly(β-thioether ester ketal) networks capable of undergoing complete degradation under acid and/or basic conditions. Using the design of four novel bisalkene diketal monomers, we demonstrate the ability to tune degradation profiles under acidic conditions with timescales dictated by the structure of the diketal linker, while hydrolysis of the β-thioether ester functionality dominates the degradation profile under basic conditions irrespective of the diketal structure. All four poly(β-thioether ester ketal) networks exhibited degradation behavior characteristic of a surface erosion process. The networks showed mechanical (low modulus) and thermomechanical properties (low Tg) typical of thiol–ene thermosets with minimal influence from the structure of the diketal linkage. To highlight the advantages of endowing a step-growth network with ketal linker chemistry, we demonstrated the ability to recover diketone precursors from the thermoset degradation by-products and recycle these compounds into building blocks for additional thermoset materials.

Thiolactone chemistry has garnered significant attention as a powerful post-polymerization modification (PPM) route to mutlifunctional polymeric materials. Here, we apply this versatile chemistry to the fabrication of ultrathin, multifunctional polymer surfaces via aminolysis and thiol-mediated double modifications of thiolactone-containing polymer brushes. Polymer brush surfaces were synthesized via microwave-assisted surface-initiated polymerization of DL-homocysteine thiolactone acrylamide. Aminolysis and thiol-Michael double modifications of the thiolactone-functional brush were explored using both sequential and one-pot reactions with bromobenzyl amine and 1H,1H-perfluoro-N-decyl acrylate. X-ray photoelectron spectroscopy and argon gas cluster ion sputter depth profiling enabled quantitative comparison of the sequential and one-pot PPM routes with regard to conversion and spatial distribution of functional groups immobilized throughout thickness of the brush. While one-pot conditions proved to be more effective in immobilizing the amine and acrylate within the brush, the sequential reaction enabled the fabrication of multifunctional, micropatterned brush surfaces using reactive microcontact printing.

The synthesis of a fully degradable, bio-based, sustained release, pro-antimicrobial polymer network comprised of degradable acetals (PANDA) is reported. The active antimicrobial agent - p-anisaldehyde (pA) (an extract from star anise) - was converted into a UV curable acetal containing pro-antimicrobial monomer and subsequently photopolymerized into a homogenous thiol-ene network. Under neutral to acidic conditions (pH 8), the PANDAs undergo surface erosion and exhibit sustained release of pA over 38 days. The release of pA from PANDAs was shown to be effective against both bacterial and fungal pathogens. From a combination of confocal microscopy and transmission electron microscopy, we observed that the released pA disrupts the cell membrane. Additionally, we demonstrated that PANDAs have minimal cytotoxicity towards both epithelial cells and macrophages. Although a model platform, these results point to promising pathways for the design of fully degradable sustained-release antimicrobial systems with potential applications in agriculture, pharmaceuticals, cosmetics, household/personal care, and food industries.With the increasing number of patients prescribed immunosuppressants coupled with the rise in antibiotic resistance - life-threatening microbial infections are a looming global threat. With limited success within the antibiotic pipeline, nature-based essential oils (EOs) are being investigated for their multimodal effectiveness against microbes. Despite the promising potential of EOs, difficulties in their encapsulation, limited water solubility, and high volatility limit their use. Various studies have shown that covalent attachment of these EO derivatives to polymers can mitigate these limitations. The current study presents the synthesis of a fully-degradable, sustained release, cytocompatible, pro-antimicrobial acetal network derived from p-anisaldehyde. This polymer network design provides a pathway toward application-specific EO releasing materials with quantitative encapsulation efficiencies, sustained release, and broad-spectrum antimicrobial activity.

Plant-derived aldehydes are constituents of essential oils that possess broad-spectrum antimicrobial activity and kill microorganisms without promoting resistance. In our previous study, we incorporated p-anisaldehyde from star anise into a polymer network called proantimicrobial networks via degradable acetals (PANDAs) and used it as a novel drug delivery platform. PANDAs released p-anisaldehyde upon a change in pH and humidity and controlled the growth of the multidrug-resistant pathogen Pseudomonas aeruginosa PAO1. In this study, we identified the cellular pathways targeted by p-anisaldehyde by generating 10,000 transposon mutants of PAO1 and screened them for hypersensitivity to p-anisaldehyde. To improve the antimicrobial efficacy of p-anisaldehyde, we combined it with epigallocatechin gallate (EGCG), a polyphenol from green tea, and demonstrated that it acts synergistically with p-anisaldehyde in killing P. aeruginosa. We then used transcriptome sequencing to profile the responses of P. aeruginosa to p-anisaldehyde, EGCG, and their combination. The exposure to p-anisaldehyde altered the expression of genes involved in modification of the cell envelope, membrane transport, drug efflux, energy metabolism, molybdenum cofactor biosynthesis, and the stress response. We also demonstrate that the addition of EGCG reversed many p-anisaldehyde-coping effects and induced oxidative stress. Our results provide insight into the antimicrobial activity of p-anisaldehyde and its interactions with EGCG and may aid in the rational identification of new synergistically acting combinations of plant metabolites. Our study also confirms the utility of the thiol-ene polymer platform for the sustained and effective delivery of hydrophobic and volatile antimicrobial compounds. IMPORTANCE Essential oils (EOs) are plant-derived products that have long been exploited for their antimicrobial activities in medicine, agriculture, and food preservation. EOs represent a promising alternative to conventional antibiotics due to their broad-range antimicrobial activity, low toxicity to human commensal bacteria, and capacity to kill microorganisms without promoting resistance. Despite the progress in the understanding of the biological activity of EOs, our understanding of many aspects of their mode of action remains inconclusive. The overarching aim of this work was to address these gaps by studying the molecular interactions between an antimicrobial plant aldehyde and the opportunistic human pathogen Pseudomonas aeruginosa. The results of this study identify the microbial genes and associated pathways involved in the response to antimicrobial phytoaldehydes and provide insights into the molecular mechanisms governing the synergistic effects of individual constituents within essential oils.

The photocatalyst Zn(II) meso-tetra(4-sulfonatophenyl)porphyrin (ZnTPPS) is found to substantially accelerate visible-light-initiated (red, yellow, green light) single unit monomer insertion (SUMI) of N,N-dimethylacrylamide into the reversible addition-fragmentation chain transfer (RAFT) agent, 4-((((2-carboxyethyl)thio)carbonothioyl)thio)-4-cyanopentanoic acid (RAFT1 ), in aqueous solution. Thus, under irradiation with red (633 nm) or yellow (593 nm) light with 50 mpm (moles per million mole of monomer) ZnTPPS at 30 °C, the rate enhancement provided by photoinduced energy or electron transfer (PET) is ≈sevenfold over the rate of direct photoRAFT-SUMI (without catalyst), which corresponds to achieving full and selective reaction in hours versus days. Importantly, the selectivity, as judged by the absence of oligomers, is retained. Under green light at similar power, higher rates of SUMI are also observed. However, the degree of enhancement provided by PET-RAFT-SUMI over direct photoRAFT-SUMI as a function of catalyst concentration is less and some oligomers are formed.

Thiol-ene chemistry was exploited in droplet-based microfluidics to fabricate advanced microcapsules with tunable encapsulation, degradation, and thermal properties. In addition, by utilizing the thiol-ene photopolymerization with tunable cross-link density, we demonstrate the importance of monomer conversion on the retention of omniphilic cargo in double emulsion templated microcapsules. Furthermore, we highlight the rapid cure kinetics afforded by thiol-ene chemistry in a continuous flow photopatterning device for hemispherical microparticle production.

Post-polymerization modification (PPM) has been broadly employed to achieve functional polymer brush surfaces via immobilization of functional moieties on the brush using efficient organic tranformations. Here, we demonstrate the amine-anhydride reaction as a modular PPM route to functional brush surfaces using poly(styrene–maleic anhydride) (pSMA) copolymer brushes as a platform. The amine-anhydride reaction on pSMA surfaces proceeds to high conversions, with rapid kinetics, under ambient reaction conditions, and exploits a readily available library of functional amines. Using cystamine as a modifier, a convenient route to thiol-functionalized brushes was developed that enables sequential PPM modifications with a large library of alkenes using both base-catalyzed thiol-Michael and radical-mediated thiol–ene reactions. The high fidelity PPM reactions were demonstrated via the development of multifunctional, micropatterned brush surfaces.

Large-scale industrial applications of barrier films and coatings that prevent permeation of degradative gases and moisture call for the development of cost-efficient and ecofriendly polymer nanocomposites. Herein, we report the facile fabrication of latex nanocomposites (LNCs) by incorporating surface-modified graphene oxide (mGO) at various loadings (0.025-1.2 wt %) into a styrene-acrylic latex using water as the processing solvent. LNCs fabricated with mGO exhibited significant reductions (up to 67%) in water vapor sorption, resulting in greater environmental stability when compared to LNCs fabricated with equivalent loading of hydrophilic, unmodified GO. The assembly and coalescence of the exfoliated latex/mGO dispersions during the film formation process produced highly dispersed and well-ordered mGO domains with high aspect ratios, where alignment and overlap of the mGO domains improved with increasing mGO content. The addition of only 0.7 vol % (1.2 wt %) mGO led to an 84% decrease (relative to the neat polymer latex film) in oxygen permeability of the LNC films, an excellent barrier performance attributed to the observed LNC film morphologies. This work enables ecofriendly development of mechanically flexible mGO/LNC films with superior barrier properties for many industrial applications including protective coatings, food packaging, and biomedical products.

We report a first example of thiol–trifluorovinyl ether (thiol–TFVE) photopolymerization as a facile, cure-on-demand synthetic route to semifluorinated polymer networks. The thiol–TFVE reaction—which proceeds via anti-Markovnikov addition of a thiyl radial to the TFVE group—was elucidated using model small molecule reactions between phenyl trifluorovinyl ether and thiols with varying reactivity. These model reactions, characterized by 19F NMR, 1H NMR, and FTIR, also provided evidence of an oxygen-induced degradation pathway that may be circumvented by performing the reactions under an inert gas atmosphere. Photopolymerization of difunctional TFVE monomers with multifunctional thiols occurred with rapid kinetics and high conversions as observed with real-time FTIR and provided homogeneous semifluorinated polymer networks with narrow glass transitions as observed with dynamic mechanical analysis. The semifluorinated ether/thioether linkage incorporated into the polymer network yielded hydrophobic materials ...

We report on the use of visible light as the driving force for the intramolecular dimerization of pendant anthracene groups on a methacrylic polymer to induce the formation of single-chain nanoparticles (SCNPs). Using a 532 nm green laser light source and platinum octaethylporphyrin as a sensitizer, we first demonstrated the use of TTA-UC to dimerize monomeric anthracene, and subsequently applied this concept to dilute poly((methyl methacrylate)-stat-(anthracenyl methacrylate)) samples. A combination of triple-detection size-exclusion chromatography, atomic force microscopy, and UV-visible spectroscopy confirmed the formation of the SCNPs. This report pioneers the use of TTA-UC to drive photochemical reactions in polymeric systems, and showcases the potential for TTA-UC in the development of nanoobjects.

We report a simple route to engineer ultrathin polymer brush surfaces with wrinkled morphologies using post-polymerization modification (PPM), where the length scale of the buckled features can be tuned from hundreds of nanometers to one micrometer using PPM reaction time. We show that partial crosslinking of the outer layer of the polymer brush under poor solvent conditions is critical to obtain wrinkled morphologies upon swelling. Characterization of the PPM kinetics and swelling behavior via ellipsometry and the through-thickness composition profile via time-of-flight secondary ion mass spectroscopy (ToF-SIMS) provided keys insight into parameters influencing the buckling behavior.

A postpolymerization modification strategy based on ambient temperature nucleophilic chemical deblocking of polymer scaffolds bearing N-heterocycle-blocked isocyanate moieties is reported. Room temperature RAFT polymerization of three azole-N-carboxamide methacrylates, including 3,5-dimethylpyrazole, imidazole, and 1,2,4-triazole derivatives, afforded reactive polymer scaffolds with well-defined molecular weights and narrow dispersities (Đ < 1.2). Model analogues possessing the same N-heterocycle blocking agents with varied leaving group abilities were synthesized to determine optimal deblocking conditions. The reactivity of the azole-N-carboxamide moieties toward nucleophiles can be tuned simply by varying the structure of the azole blocking agents (reactivity order: pyrazole < imidazole < triazole). DBU-catalyzed reactions of thiols with imidazole- and 1,2,4-triazole-blocked isocyanate scaffolds were shown to occur rapidly and quantitatively under ambient conditions. Differences in reactivity of 1,2,4-t...

Block-copolymer orientation in thin films is controlled by the complex balance between interfacial free energies, including the inter-block segregation strength, the surface tensions of the blocks, and the relative substrate interactions. While block-copolymer lamellae orient horizontally when there is any preferential affinity of one block for the substrate, we recently described how nanoparticle-roughened substrates can be used to modify substrate interactions. We demonstrate how such 'neutral' substrates can be combined with control of annealing temperature to generate vertical lamellae orientations throughout a sample, at all thicknesses. We observe an orientational transition from vertical to horizontal lamellae upon heating, as confirmed using a combination of atomic force microscopy (AFM), neutron reflectometry (NR) and rotational small-angle neutron scattering (RSANS). Using molecular dynamics (MD) simulations, we identify substrate-localized distortions to the lamellar morphology as the physical basis of the novel behavior. In particular, under strong segregation conditions, bending of horizontal lamellae induce a large energetic cost. At higher temperatures, the energetic cost of conformal deformations of lamellae over the rough substrate is reduced, returning lamellae to the typical horizontal orientation. Thus, we find that both surface interactions and temperature play a crucial role in dictating block-copolymer lamellae orientation. Our combined experimental and simulation findings suggest that controlling substrate roughness should provide a useful and robust platform for controlling block-copolymer orientation in applications of these materials.

In this work, sub-100 nm crosslinked polythioether nanoparticles were synthesized via thiol–ene photopolymerization in miniemulsion using high-energy homogenization. The effects of the miniemulsion formulation and homogenization parameters – including inhibitor concentration, surfactant concentration, organic weight fraction, ultrasonication time and amplitude – on nanoparticle size and size distribution were investigated. Thiol–ene nanoparticles with a mean particle diameter of 46 nm were obtained under optimized conditions for the current system at 2.5 wt% organic fraction and 20 mM surfactant concentration. In an effort to demonstrate potential utility of thiol–ene nanoparticles, we exploit the step-growth radical mechanism of thiol–ene photopolymerization under non-stoichiometric conditions to fabricate functional nanoparticles that express excess thiol or alkene at the particle surface. We show that these excess functional groups can be utilized as reactive handles in thiol-Michael and radical-mediated thiol–ene reactions for immobilization of fluorescent moieties via postpolymerization modification.

Advances in key 21st century technologies such as biosensors, biomedical implants, and organic light-emitting diodes rely heavily on our ability to imagine, design, and understand spatially complex interfaces. Polymer-based thin films provide many advantages in this regard, but the direct synthesis of polymers with incompatible functional groups is extremely difficult. Using postpolymerization modification in conjunction with click chemistry can circumvent this limitation and result in multicomponent surfaces that are otherwise unattainable. The two methods used to form polymer thin films include physisorption and chemisorption. Physisorbed polymers suffer from instability because of the weak intermolecular forces between the film and the substrate, which can lead to dewetting, delamination, desorption, or displacement. Covalent immobilization of polymers to surfaces through either a "grafting to" or "grafting from" approach provides thin films that are more robust and less prone to degradation. The grafting to technique consists of adsorbing a polymer containing at least one reactive group along the backbone to form a covalent bond with a complementary surface functionality. Grafting from involves polymerization directly from the surface, in which the polymer chains deviate from their native conformation in solution and stretch away from the surface because of the high density of chains. Postpolymerization modification (PPM) is a strategy used by our groups over the past several years to immobilize two or more different chemical functionalities onto substrates that contain covalently grafted polymer films. PPM exploits monomers with reactive pendant groups that are stable under the polymerization conditions but are readily modified via covalent attachment of the desired functionality. "Click-like" reactions are the most common type of reactions used for PPM because they are orthogonal, high-yielding, and rapid. Some of these reactions include thiol-based additions, activated ester coupling, azide-alkyne cycloadditions, some Diels-Alder reactions, and non-aldol carbonyl chemistry such as oxime, hydrazone, and amide formation. In this Account, we highlight our research combining PPM and click chemistry to generate complexity in polymer thin films. For the purpose of this Account, we define a complex coating as a polymer film grafted to a planar surface that acts as a template for the patterning of two or more discrete chemical functionalities using PPM. After a brief introduction to grafting, the rest of the review is arranged in terms of the sequence in which PPM is performed. First, we describe sequential functionalization using iterations of the same click-type reaction. Next, we discuss the use of two or more different click-like reactions performed consecutively, and we conclude with examples of self-sorting reactions involving orthogonal chemistries used for one-pot surface patterning.

This paper reports the synthesis of catechol-functionalized thiol–ene polymer networks as photocurable adhesives, where the adhesive interactions are derived from 4-allylpyrocatechol – a monofunctional alkene readily obtained from natural products of Syzygium aromaticum flower buds (clove). The thiol–ene photopolymerization process enables rapid cure times, low energy input, and solvent-free processing. The resulting polymer networks show improved macroscopic adhesion to a variety of substrates – including glass, marble, aluminum, and steel – by varying the concentration of 4-allylpyrocatechol in the network. Additionally, the effects of the catechol moiety on polymerization kinetics, thermomechanical, and mechanical properties were determined by comparing the synthesized catechol moiety to a series of control monomers such as eugenol (one phenol group) and methyl eugenol (no phenol groups).

We report the copolymerization of a flexible aliphatic-bridged bisphenol-based benzoxazine monomer comprising ten methylene units (BZ(10)BA) with two rigid benzoxazine monomers (commercially available Araldite 35600 and 35900) via a solvent-free cationic ring-opening polymerization process. The effects of monomer feed composition on polymerization behavior, thermomechanical transitions, and thermal degradation properties are reported. DSC of the ring-opening copolymerizations showed that the copolymerization behavior – in terms of polymerization onset temperature and total exothermic transition – depend greatly on the composition of the monomer feed. Samples containing larger concentrations of BZ(10)BA exhibited higher onset temperatures with lower polymerization enthalpies. The thermomechanical properties of the copolybenzoxazine networks, as evaluated by DMA, show a strong dependence on the monomer feed ratio, where higher Araldite content resulted in a higher T g of the network. The most salient feature of benzoxazine copolymerization was revealed in the tailorability in thermomechanical properties, which were varied by 149 °C simply by changing the monomer feed ratio and the T g was observed to be accurately predicted using the Fox equation.

Throughout the past decade, investigations of thick thermoset thiol–ene networks (TENs) have become increasingly prominent in the literature due to facile, quantitative synthesis giving rise to uni...

Summary The thermal and thermomechanical properties of two commercially available polybenzoxazine materials were investigated as a function of maximum temperature employed in the cure profile. Cationic ring-opening polymerization of Araldite 35600 and Araldite 35900 was carried out at 180 °C, 200 °C, 220 °C, and 240 °C. FTIR and differential scanning analysis results show maximum conversion in each monomer system is achieved at 180 °C or 200 °C, and that higher cure temperatures were unnecessary. Thermal stability of the polybenzoxazine materials prepared under both low and high temperature cure profiles, as indicated by thermogravimetric analysis results, was minimally affected with increasing cure temperatures. Dynamic mechanical analysis results indicate that despite an increase in the rubbery storage modulus as a function of maximum cure temperature, higher cure temperatures employed in ambient atmosphere ovens result in detrimental effects on the glass transition temperature of the network. In the case of Araldite 35600, a 12 °C decrease in Tg was observed when the cure temperature was increased from 180 °C to 240 °C. The combined FTIR, DSC, and DMA data for Araldite 35600 and Araldite 35900 show that optimized conversion and thermomechanical properties can be achieved at lower cure temperatures. Thus, a judicious choice of cure profile must be considered to avoid degradative processes and to achieve the maximum properties of polybenzoxazine systems.

We report aqueous RAFT polymerization at pH = 0 mediated by a novel imidazolium-containing chain transfer agent. In 1 M HCl, unprecedented controlled polymerization and chain-extension of unprotected acyl hydrazide methacrylamides is achieved enabling the synthesis of well-defined acyl hydrazide functionalized polymer scaffolds of interest for dynamic covalent and bioconjugation strategies.

In this work, a postpolymerization surface modification approach is reported that provides pendent thiol functionality along the polymer brush backbone using the photolabile protection chemistry of both o-nitrobenzyl and p-methoxyphenacyl thioethers. Poly(2-hydroxyethyl methacrylate) (pHEMA) brushes were synthesized via surface-initiated atom transfer radical polymerization, after which the pHEMA hydroxyl groups were esterified with 3-(2-nitrobenzylthio)propanoic acid or 3-(2-(4-methoxyphenyl)-2-oxoethylthio)propanoic acid to provide the photolabile protected pendent thiols. Addressing the protecting groups with light not only affords spatial control of reactive thiol functionality but enables a plethora of thiol-mediated transformations with isocyanates and maleimides providing a modular route to create functional polymer surfaces. This concept was extended to block copolymer brush architectures enabling the modification of the chemical functionality of both the inner and outer blocks of the block copolymer surface. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013

Dual-cure hybrid polymer networks were prepared by sequential thiol–ene photopolymerization followed by thermal ring-opening polymerization of benzoxazines with the aim of increasing the glass transition temperature range of thiol–ene based materials and improving the processibility of polybenzoxazines. The hybrid networks are derived from a multifunctional, dually-polymerizable monomer possessing both bis-“ene” and bis-benzoxazine moieties enabling the formation of two networks through a common constituent monomer when combined with a multifunctional thiol. The photopolymerization kinetics of the thiol–ene reaction were investigated by real-time infrared spectroscopy. Sequential thermal ring-opening polymerization of the benzoxazine moieties incorporated into the thiol–ene network was characterized by FTIR and differential scanning calorimetry. The glass transition of the hybrid material was observed at 150 °C; however, competing thiol–ene (radical-mediated) and thiol–benzoxazine (nucleophilic ring-opening) reactions during the UV cure yield a heterogeneous network structure.

In this work, we report the synthesis of photocurable, ternary polymer networks prepared by incorporating dopamine acrylamide (DAm) into a cross-linked thiol–ene network based on pentaerythritol triallyl ether (APE) and pentaerythritol tetra(3-mercaptopropionate) (PETMP). We systematically evaluate the effect of DAm, in the nonoxidized catechol form, on photopolymerization kinetics and thermal, thermomechanical, and mechanical properties of the modified thiol–ene networks. We show that while DAm only affects photopolymerization kinetics at high concentrations, the presence of the catechol moiety significantly increases the glass transition temperature of the networks across the compositional range (0–50 mol % DAm) due to hydrogen bonding interactions between the catechol and various hydrogen bonding acceptors (ethers, amides, esters) within the network, despite an obvious decrease in cross-link density with increasing concentration of the monofunctional acrylamide. Similarly, trends in the mechanical prop...

Microwave-assisted surface-initiated radical polymerization (μW-SIP) is demonstrated for the rapid synthesis of polymer brush surfaces on two-dimensional substrates. μW-SIP is carried out at constant temperature and microwave power allowing comparison with conventional SIP carried out in an oil bath at the same effective solution temperature. We show μW-SIP enables significant enhancements (up to 39-fold increase) in brush thickness at reduced reaction times for a range of monomer types (i.e. acrylamides, acrylates, methacrylates, and styrene). The effects of reaction time, monomer concentration, and microwave power on film thickness are explored.

Fabrication of multifunctional surfaces with complexity approaching that found in nature requires the application of a modular approach to surface engineering. We describe a versatile post-polymerization modification strategy to synthesize multifunctional polymer brush surfaces via combination of surface-initiated photopolymerization (SIP) and orthogonal thiol-click reactions. Specifically, we demonstrate two routes to multifunctional brush surfaces: in the first approach, alkyne-functionalized homopolymer brushes are modified with multiple thiolsvia a statistical, radical-mediated thiol-yne co-click reaction; and in the second approach, statistical copolymer brushes carrying two distinctly-addressable reactive moieties are sequentially modified via orthogonal base-catalyzed thiol-X (where X represents an isocyanate, epoxy, or α-bromoester) and radical-mediated thiol-yne reactions. In both cases, we show that surface properties, in the form of wettability, can be easily tuned over a wide range by judicious choice of brush composition and thiol functionality.

Thechoiceofpolymersandthetypeofgraftingtechniquesemployedforsurfacemodificationisanimportant aspect since chemical composition and surfaceconformation often dictate the specific property obtained,e.g., friction and wetting. In particular, when the graftingdensity of polymer chains becomes sufficiently high suchthat neighboring chains overlap, the crowded chains areforcedtostretchnormaltothesurface,formingthesocalledpolymerbrushstructure.

In this work, Udel® polysulfone was functionalized with quaternary ammonium and phosphonium based cations for thin-film anion exchange membranes (AEMs). At this time, discussion is limited to the chemical, mechanical, and thermal attributes of quaternary ammonium polysulfone (QAPSF). Key results indicate that the thermal properties of QAPSF are well suited for low temperature fuel cells, but improvement to QAPSF conductivity and mechanical properties is needed for durable and high performing alkaline fuel cells. It was observed that water uptake of nearly 15% of the normalized membrane weight is needed to facilitate ion conductivity in the QAPSF membrane. Finally, fuel cell performance is demonstrated with a QAPSF membrane electrode assembly.

Self-assembly is a promising route for controlling the nanoscale structure and material properties of coatings, yet it remains difficult to control the microstructure of these systems. In particular, self-assembling materials typically have complex and delicate energy landscapes, which are sensitive to defects, making it difficult to control morphology or orientation. We present a simple and robust strategy for modulating the film-substrate interaction, which can bias the self-assembly energy landscape and thus enforce a desired microstructure. The technique uses nanoparticles with tunable surface energy to generate a rough interface with controlled properties. The intentionally disordered interface is tolerant to variation in substrate preparation. We apply this technique to block-copolymer lamellae, and demonstrate a remarkable thickness-dependence of the induced orientation, consistent with theoretical predictions. The simultaneous control of substrate energy and topography enables expression of the vertical lamellae state without rigorous control of the preparation conditions. We measure an 8-fold increase in surface energy tolerance compared to flat substrates.

We describe a series of well-defined dendritic−linear block copolymer architectures via the reversible addition−fragmentation chain transfer (RAFT) polymerization technique. Using dendritic chain transfer agents (CTA)s possessing a single dithioester moiety at the focal point, RAFT polymerization was carried out to attach polystyrene (PS) and poly(methyl methacrylate) (PMMA) chains of controlled lengths by kinetic control. To provide electrochemical functionality, the dendritic CTAs were designed with carbazole moieties at the periphery of the structures. The results on the electrochemical polymerization of the carbazole moieties at the periphery of the dendritic component of the block copolymers reveal quantitative cyclic depositions with changes in viscoelastic properties of the deposited films as monitored by the electrochemical quartz crystal microbalance technique. The electroactive dendritic blocks proved to be an effective electrochemically active macromonomer for the electrodeposition of these str...

The synthesis of antimicrobial thymol/carvacrol-loaded polythioether nanoparticles (NPs) via a one-pot, solvent-free miniemulsion thiol-ene photopolymerization process is reported. The active antimicrobial agents, thymol and carvacrol, are employed as "solvents" for the thiol-ene monomer phase in the miniemulsion to enable facile high capacity loading (≈50% w/w), excellent encapsulation efficiencies (>95%), and elimination of all postpolymerization purification processes. The NPs serve as high capacity reservoirs for slow-release and delivery of thymol/carvacrol-combination payloads that exhibit inhibitory and bactericidal activity (>99.9% kill efficiency at 24 h) against gram-positive and gram-negative bacteria, including both saprophytic (Bacillus subtilis ATCC 6633 and Escherichia coli ATCC 25922) and pathogenic species (E. coli ATCC 43895, Staphylococcus aureus RN6390, and Burkholderia cenocepacia K56-2). This report is among the first to demonstrate antimicrobial efficacy of essential oil-loaded nanoparticles against B. cenocepacia - an innately resistant opportunistic pathogen commonly associated with debilitating respiratory infections in cystic fibrosis. Although a model platform, these results point to promising pathways to particle-based delivery of plant-derived extracts for a range of antimicrobial applications, including active packaging materials, topical antiseptics, and innovative therapeutics.

Detection of specific RNA or DNA molecules by hybridization to "probe" nucleic acids via complementary base-pairing is a powerful method for analysis of biological systems. Here we describe a strategy for transducing hybridization events through modulating intrinsic properties of the electroconductive polymer polyaniline (PANI). When DNA-based probes electrostatically interact with PANI, its fluorescence properties are increased, a phenomenon that can be enhanced by UV irradiation. Hybridization of target nucleic acids results in dissociation of probes causing PANI fluorescence to return to basal levels. By monitoring restoration of base PANI fluorescence as little as 10(-11) M (10 pM) of target oligonucleotides could be detected within 15 min of hybridization. Detection of complementary oligos was specific, with introduction of a single mismatch failing to form a target-probe duplex that would dissociate from PANI. Furthermore, this approach is robust and is capable of detecting specific RNAs in extracts from animals. This sensor system improves on previously reported strategies by transducing highly specific probe dissociation events through intrinsic properties of a conducting polymer without the need for additional labels.

Thiol–yne photopolymerization in miniemulsion is demonstrated as a simple, rapid, and one-pot synthetic approach to polythioether nanoparticles with tuneable particle size and clickable functionality. The strategy is also useful in the synthesis of composite polymer–inorganic nanoparticles.

We describe a facile route to prepare functional macromonomers using reversible addition−fragmentation chain transfer (RAFT) polymerization. This was demonstrated in the synthesis of α-functionalized norbornenyl, vinyl, and cinnamyl macromonomers using functional chain transfer agents bearing these end groups. Various homopolymer macromonomers of well-controlled molecular weights were synthesized with near-quantitative incorporation of the end group functionality. The use of norbornenyl and vinyl CTA's resulted in a highly quantitative polymerization of styrene and methyl methacrylate (MMA) monomers yielding well-defined linear macromonomers. On the other hand, monomers with a lower reactivity such as methyl acrylate (MA) exhibited a broader polydispersity. The cinnamyl-functionalized telechelics proved the most challenging due to a competitive chain transfer between the cinnamyl group and the RAFT CTA at higher conversions. To demonstrate utilization of the macromonomer functionality, we synthesized the ...

We report the synthesis of ternary polymer particle material systems composed of (a) a spherical colloidal particle core, coated with (b) a polyelectrolyte intermediate shell, and followed by (c) a grafted polymer brush prepared by surface-initiated polymerization as the outer shell. The layer-by-layer (LbL) deposition process was utilized to create a functional intermediate shell of poly(diallyl-dimethylammonium chloride)/poly(acrylic acid) multilayers on the colloid template with the final layer containing an atom transfer radical polymerization (ATRP) macroinitiator polyelectrolyte. The intermediate core-shell architecture was analyzed with FT-IR, electrophoretic mobililty (zeta-potential) measurements, atomic force microscopy, and transmission electron microscopy (TEM) techniques. The particles were then utilized as macroinitiators for the surface-initiated ATRP grafting process for poly(methyl methacrylate) polymer brush. The polymer grafting was confirmed with thermo gravimetric analysis, FT-IR, and TEM. The polymer brush formed the outermost shell for a ternary colloidal particle system. By combining the LbL and surface-initiated ATRP methods to produce controllable multidomain core-shell architectures, interesting functional properties should be obtainable based on independent polyelectrolyte and polymer brush behavior.

A new series of 2,2‘-(9,9-dioctyl-9H-fluorene-2,7-diyl)diacetonitrile-based alternating polyfluorene copolymers (P12-FL, P13-FL, P14-FL) containing ortho-, meta-, and para-substituted phenylene derivatives have been designed, synthesized, and characterized. These polymers were synthesized using a Knoevenagel condensation polymerization reaction and were found to be predominantly in the trans configuration. The resulting polymers were found to be thermally stable and readily soluble in common organic solvents. The structural, configurational, and conformational changes in the backbone caused a wide variation in the absorption and emission maxima of the polymers. The fabricated light-emitting devices showed very good performance in terms of turn-on voltage, electroluminescence, and lifetime properties.

The peripheral functionalization of amine-terminated fourth-generation poly(amidoamine) (PAMAM) with thiophene dendrons and the preparation of dendrimer-encapsulated metal nanoparticles are described. Interesting nanoparticle stabilization and energy-transfer properties were observed with these hybrid materials. The synthesis involved imine coupling of the dendron derivatives to the peripheral amine groups of PAMAM followed by reduction. The formation of these metal-organic nanoparticle hybrid materials was monitored by UV-vis spectroscopy. The complexation of metal ions and the stabilization effect of PAMAM on metal nanoparticles were investigated by FT-IR. Energy transfer was observed between the metal surface plasmon absorption and fluorescence of the terthiophene dendrons. Noncontact magnetic-AC mode AFM imaging revealed the formation of monodispersed and very stable nanoparticles adsorbed on an HOPG flat substrate.