Search

Research on school improvement has accumulated an extensive list of factors that facilitate turnarounds at underperforming schools. Given that contextual or resource constraints may limit the possibilities of putting all of these factors in place, an important question is what is necessary and sufficient to turn a school around. We use a qualitative comparative analysis (QCA) of 77 Swedish schools studied over 12 years to answer this question. Our core finding is that there is no "silver bullet" solution. There are, instead, several distinct combinations of factors that can enable a turnaround. The local school context is essential for which combinations of factors are necessary and sufficient for school turnaround. We discuss implications for research on school improvement and education policy.

Human-robot collaboration (HRC) relies on accurate and timely recognition of human intentions to ensure seamless interactions. Among common HRC tasks, human-to-robot object handovers have been studied extensively for planning the robot's actions during object reception, assuming the human intention for object handover. However, distinguishing handover intentions from other actions has received limited attention. Most research on handovers has focused on visually detecting motion trajectories, which often results in delays or false detections when trajectories overlap. This paper investigates whether human intentions for object handovers are reflected in non-movement-based physiological signals. We conduct a multimodal analysis comparing three data modalities: electroencephalogram (EEG), gaze, and hand-motion signals. Our study aims to distinguish between handover-intended human motions and non-handover motions in an HRC setting, evaluating each modality's performance in predicting and classifying these actions before and after human movement initiation. We develop and evaluate human intention detectors based on these modalities, comparing their accuracy and timing in identifying handover intentions. To the best of our knowledge, this is the first study to systematically develop and test intention detectors across multiple modalities within the same experimental context of human-robot handovers. Our analysis reveals that handover intention can be detected from all three modalities. Nevertheless, gaze signals are the earliest as well as the most accurate to classify the motion as intended for handover or non-handover., Comment: In submission at Robotics and Autonomous Systems, 2025

The continuous operation of Earth-orbiting satellites generates vast and ever-growing archives of Remote Sensing (RS) images. Natural language presents an intuitive interface for accessing, querying, and interpreting the data from such archives. However, existing Vision-Language Models (VLMs) are predominantly trained on web-scraped, noisy image-text data, exhibiting limited exposure to the specialized domain of RS. This deficiency results in poor performance on RS-specific tasks, as commonly used datasets often lack detailed, scientifically accurate textual descriptions and instead emphasize solely on attributes like date and location. To bridge this critical gap, we introduce GAIA, a novel dataset designed for multi-scale, multi-sensor, and multi-modal RS image analysis. GAIA comprises of 205,150 meticulously curated RS image-text pairs, representing a diverse range of RS modalities associated to different spatial resolutions. Unlike existing vision-language datasets in RS, GAIA specifically focuses on capturing a diverse range of RS applications, providing unique information about environmental changes, natural disasters, and various other dynamic phenomena. The dataset provides a spatially and temporally balanced distribution, spanning across the globe, covering the last 25 years with a balanced temporal distribution of observations. GAIA's construction involved a two-stage process: (1) targeted web-scraping of images and accompanying text from reputable RS-related sources, and (2) generation of five high-quality, scientifically grounded synthetic captions for each image using carefully crafted prompts that leverage the advanced vision-language capabilities of GPT-4o. Our extensive experiments, including fine-tuning of CLIP and BLIP2 models, demonstrate that GAIA significantly improves performance on RS image classification, cross-modal retrieval and image captioning tasks., Comment: 22 pages, 13 figures

We consider a cell-free massive multiple-input multiple-output (mMIMO) network, where unmanned aerial vehicles (UAVs) equipped with multiple antennas serve as distributed UAV-access points (UAV-APs). These UAV-APs provide seamless coverage by jointly serving user equipments (UEs) with out predefined cell boundaries. However, high-capacity wireless networks face significant challenges due to fronthaul limitations in UAV-assisted architectures. This letter proposes a novel UAV-based cell-free mMIMO framework that leverages distributed UAV-APs to serve UEs while addressing the capacity constraints of wireless fronthaul links. We evaluate functional split Options 7.2 and 8 for the fronthaul links, aiming to maximize the minimum signal-to-interference-plus-noise ratio (SINR) among the UEs and minimize the power consumption by optimizing the transmit powers of UAV-APs and selectively activating them. Our analysis compares sub-6 GHz and millimeter wave (mmWave) bands for the fronthaul, showing that mmWave achieves superior SINR with lower power consumption, particularly under Option 8. Additionally, we determine the minimum fronthaul bandwidth required to activate a single UAV-AP under different split options.

The development of image time series retrieval (ITSR) methods is a growing research interest in remote sensing (RS). Given a user-defined image time series (i.e., the query time series), the ITSR methods search and retrieve from large archives the image time series that have similar content to the query time series. The existing ITSR methods in RS are designed for unimodal retrieval problems, limiting their usability and versatility. To overcome this issue, as a first time in RS we introduce the task of cross-modal text-ITSR. In particular, we present a self-supervised cross-modal text-image time series retrieval (text-ITSR) method that enables the retrieval of image time series using text sentences as queries, and vice versa. In detail, we focus our attention on text-ITSR in pairs of images (i.e., bitemporal images). The proposed text-ITSR method consists of two key components: 1) modality-specific encoders to model the semantic content of bitemporal images and text sentences with discriminative features; and 2) modality-specific projection heads to align textual and image representations in a shared embedding space. To effectively model the temporal information within the bitemporal images, we introduce two fusion strategies: i) global feature fusion (GFF) strategy that combines global image features through simple yet effective operators; and ii) transformer-based feature fusion (TFF) strategy that leverages transformers for fine-grained temporal integration. Extensive experiments conducted on two benchmark RS archives demonstrate the effectiveness of the proposed method in accurately retrieving semantically relevant bitemporal images (or text sentences) to a query text sentence (or bitemporal image). The code of this work is publicly available at https://git.tu-berlin.de/rsim/cross-modal-text-tsir.

Spin-forbidden ($\Delta S \neq 0$) multiplet excitations and their coupling to magnetic properties are of increasing importance for magneto-optical studies of correlated materials. Nonetheless, the mechanisms for optically brightening these transitions and their generality remain poorly understood. Here, we report magnetic circular dichroism (MCD) spectroscopy on the van der Waals (vdW) ferromagnet (FM) CrI$_3$. Previously unreported spin-forbidden ($\Delta S = 1$) ${}^4A_{2\mathrm{g}} \to{}^2E_\mathrm{g}/{}^2T_{1\mathrm{g}}$ Cr${}^{3+}$ $dd$ excitations are observed near the ligand-to-metal charge transfer (LMCT) excitation threshold. The assignment of these excitations and their Cr$^{3+}$ multiplet character is established through complementary Cr $L_3$-edge resonant inelastic X-ray scattering (RIXS) measurements along with charge transfer multiplet (CTM) calculations and chemical trends in the chromium trihalide series (CrX$_3$, X = Cl, Br, I). We utilize the high sensitivity of MCD spectroscopy to study the thickness dependent optical response. The spin-forbidden excitations remain robust down to the monolayer limit and exhibit a significant magnetic field tunability across the antiferromagnetic to FM transition in few-layer samples. This behavior is associated to changes in the metal-ligand covalency with magnetic state, as supported by our CTM analysis. Our results clarify the magneto-optical response of CrI$_3$ and identify covalency as a central mechanism for the brightening and field-tunability of spin-forbidden multiplet excitations.

In vehicle-to-everything (V2X) applications, roadside units (RSUs) can be tasked with both sensing and communication functions to enable sensing-assisted communications. Recent studies have demonstrated that distance, angle, and velocity information obtained through sensing can be leveraged to reduce the overhead associated with communication beam tracking. In this work, we extend this concept to scenarios involving multiple distributed RSUs and distributed MIMO (multiple-input multiple-output) systems. We derive the state evolution model, formulate the extended Kalman-filter equations, and implement predictive beamforming for distributed MIMO. Simulation results indicate that, when compared with a co-located massive MIMO antenna array, distributed antennas lead to more uniform and robust sensing performance, coverage, and data rates, while the vehicular user is in motion., Comment: 8 pages, 6 figures, submitted as a conference paper

Integrated sensing and communication (ISAC) boosts network efficiency by using existing resources for diverse sensing applications. In this work, we propose a cell-free massive MIMO (multiple-input multiple-output)-ISAC framework to detect unauthorized drones while simultaneously ensuring communication requirements. We develop a detector to identify passive aerial targets by analyzing signals from distributed access points (APs). In addition to the precision of the sensing, timeliness of the sensing information is also crucial due to the risk of drones leaving the area before the sensing procedure is finished. We introduce the age of sensing (AoS) and sensing coverage as our sensing performance metrics and propose a joint sensing blocklength and power optimization algorithm to minimize AoS and maximize sensing coverage while meeting communication requirements. Moreover, we propose an adaptive weight selection algorithm based on concave-convex procedure to balance the inherent trade-off between AoS and sensing coverage. Our numerical results show that increasing the communication requirements would significantly reduce both the sensing coverage and the timeliness of the sensing. Furthermore, the proposed adaptive weight selection algorithm can provide high sensing coverage and reduce the AoS by 45% compared to the fixed weights, demonstrating efficient utilization of both power and sensing blocklength.

Benchmarks are important tools for tracking the rapid advancements in large language model (LLM) capabilities. However, benchmarks are not keeping pace in difficulty: LLMs now achieve over 90\% accuracy on popular benchmarks like MMLU, limiting informed measurement of state-of-the-art LLM capabilities. In response, we introduce Humanity's Last Exam (HLE), a multi-modal benchmark at the frontier of human knowledge, designed to be the final closed-ended academic benchmark of its kind with broad subject coverage. HLE consists of 2,700 questions across dozens of subjects, including mathematics, humanities, and the natural sciences. HLE is developed globally by subject-matter experts and consists of multiple-choice and short-answer questions suitable for automated grading. Each question has a known solution that is unambiguous and easily verifiable, but cannot be quickly answered via internet retrieval. State-of-the-art LLMs demonstrate low accuracy and calibration on HLE, highlighting a significant gap between current LLM capabilities and the expert human frontier on closed-ended academic questions. To inform research and policymaking upon a clear understanding of model capabilities, we publicly release HLE at https://lastexam.ai., Comment: 27 pages, 6 figures

Federated learning (FL) is a decentralized machine learning paradigm, where multiple clients collaboratively train a global model by exchanging only model updates with the central server without sharing the local data of clients. Due to the large volume of model updates required to be transmitted between clients and the central server, most FL systems are associated with high transfer costs (i.e., communication overhead). This issue is more critical for operational applications in remote sensing (RS), especially when large-scale RS data is processed and analyzed through FL systems with restricted communication bandwidth. To address this issue, we introduce an explanation-guided pruning strategy for communication-efficient FL in the context of RS image classification. Our pruning strategy is defined based on the layerwise relevance propagation (LRP) driven explanations to: 1) efficiently and effectively identify the most relevant and informative model parameters (to be exchanged between clients and the central server); and 2) eliminate the non-informative ones to minimize the volume of model updates. The experimental results on the BigEarthNet-S2 dataset demonstrate that our strategy effectively reduces the number of shared model updates, while increasing the generalization ability of the global model. The code of this work will be publicly available at https://git.tu-berlin.de/rsim/FL-LRP, Comment: Submitted to the IEEE International Geoscience and Remote Sensing Symposium (IGARSS) 2025

Large Language Models (LLMs) hold promise for advancing legal practice by automating complex tasks and improving access to justice. However, their adoption is limited by concerns over client confidentiality, especially when lawyers include sensitive Personally Identifiable Information (PII) in prompts, risking unauthorized data exposure. To mitigate this, we introduce LegalGuardian, a lightweight, privacy-preserving framework tailored for lawyers using LLM-based tools. LegalGuardian employs Named Entity Recognition (NER) techniques and local LLMs to mask and unmask confidential PII within prompts, safeguarding sensitive data before any external interaction. We detail its development and assess its effectiveness using a synthetic prompt library in immigration law scenarios. Comparing traditional NER models with one-shot prompted local LLM, we find that LegalGuardian achieves a F1-score of 93% with GLiNER and 97% with Qwen2.5-14B in PII detection. Semantic similarity analysis confirms that the framework maintains high fidelity in outputs, ensuring robust utility of LLM-based tools. Our findings indicate that legal professionals can harness advanced AI technologies without compromising client confidentiality or the quality of legal documents., Comment: 10 pages, 3 figures

This study evaluates the performance of several Large Language Models (LLMs) on MedRedQA, a dataset of consumer-based medical questions and answers by verified experts extracted from the AskDocs subreddit. While LLMs have shown proficiency in clinical question answering (QA) benchmarks, their effectiveness on real-world, consumer-based, medical questions remains less understood. MedRedQA presents unique challenges, such as informal language and the need for precise responses suited to non-specialist queries. To assess model performance, responses were generated using five LLMs: GPT-4o mini, Llama 3.1: 70B, Mistral-123B, Mistral-7B, and Gemini-Flash. A cross-evaluation method was used, where each model evaluated its responses as well as those of others to minimize bias. The results indicated that GPT-4o mini achieved the highest alignment with expert responses according to four out of the five models' judges, while Mistral-7B scored lowest according to three out of five models' judges. This study highlights the potential and limitations of current LLMs for consumer health medical question answering, indicating avenues for further development.

We report on a systematic study of the Cd, Zn, Se, and S elemental distributions across the interfaces in CdSe/Cd1-xZnxS core-shell and CdSe/CdS/Cd1-xZnxS core-crown-shell quantum wells with the CdSe core thickness ranging from 3.5 to 5.5 ML. By processing the XAS data, we observe that the Cd-Se bonds dominate at the CdSe/Cd1-xZnxS core-shell interface of structures with the 3.5 ML cores, while the Cd-Se bonds were more abundant in the cases of the 4.5 and 5.5 ML cores. The complementary information about prevailing bonds were extracted for other constituting elements, thus, describing the distribution of the elements at the core-shell interface of CdSe-based NPLs. The naked CdSe cores are covered with an organic shell via bridging oxygen atoms. Also, we address the issue of stability of such core-shell systems over the time. We demonstrate that after a half year of aging of the commercial-ready 4.5 ML CdSe/CdxZn1-xS NPLs, the Cd-Se bonds become more evident due to the partial degradation of the Cd-S bonds. This is the first experimental assessment of prevailing interatomic bonds at the core-shell interface in the CdSe-based NPLs of incremental structural heterogeneity, providing factual evidences about the elemental arrangement inside the core-crown-shell NPLs and the growth path of crowns and shells.

Cell detection and segmentation are integral parts of automated systems in digital pathology. Encoder-decoder networks have emerged as a promising solution for these tasks. However, training of these networks has typically required full boundary annotations of cells, which are labor-intensive and difficult to obtain on a large scale. However, in many applications, such as cell counting, weaker forms of annotations--such as point annotations or approximate cell counts--can provide sufficient supervision for training. This study proposes a new mixed-supervision approach for training multitask networks in digital pathology by incorporating cell counts derived from the eyeballing process--a quick visual estimation method commonly used by pathologists. This study has two main contributions: (1) It proposes a mixed-supervision strategy for digital pathology that utilizes cell counts obtained by eyeballing as an auxiliary supervisory signal to train a multitask network for the first time. (2) This multitask network is designed to concurrently learn the tasks of cell counting and cell localization, and this study introduces a consistency loss that regularizes training by penalizing inconsistencies between the predictions of these two tasks. Our experiments on two datasets of hematoxylin-eosin stained tissue images demonstrate that the proposed approach effectively utilizes the weakest form of annotation, improving performance when stronger annotations are limited. These results highlight the potential of integrating eyeballing-derived ground truths into the network training, reducing the need for resource-intensive annotations.

A reconfigurable intelligent surface (RIS) alters the reflection of incoming signals based on the phase-shift configuration assigned to its elements. This feature can be used to improve the signal strength for user equipments (UEs), expand coverage, and enhance spectral efficiency in wideband communication systems. Having accurate channel state information (CSI) is indispensable to realize the full potential of RIS-aided wideband systems. Unfortunately, CSI is challenging to acquire due to the passive nature of the RIS elements, which cannot perform transmit/receive signal processing. Recently, a parametric maximum likelihood (ML) channel estimator has been developed and demonstrated excellent estimation accuracy. However, this estimator is designed for narrowband systems with no non-line-of-sight (NLOS) paths. In this paper, we develop a novel parametric ML channel estimator for RIS-assisted wideband systems, which can handle line-of-sight (LOS) paths in the base station (BS)-RIS and RIS-UE links as well as NLOS paths between the UE, BS, and RIS. We leverage the reduced subspace representation induced by the array geometry to suppress noise in unused dimensions, enabling accurate estimation of the NLOS paths. Our proposed algorithm demonstrates superior estimation performance for the BS-UE and RIS-UE channels, outperforming the existing ML channel estimator.

Optical nonlinearities are crucial for advanced photonic technologies since they allow photons to be managed by photons. Exciton-polaritons resulting from strong light-matter coupling are hybrid in nature: they combine small mass and high coherence of photons with strong nonlinearity enabled by excitons, making them ideal for ultrafast all-optical manipulations. Among the most prospective polaritonic materials are halide perovskites since they require neither cryogenic temperatures nor expensive fabrication techniques. Here we study strikingly nonlinear self-action of ultrashort polaritonic pulses propagating in planar MAPbBr$_3$ perovskite slab waveguides. Tuning input pulse energy and central frequency, we experimentally observe various scenarios of its nonlinear evolution in the spectral domain, which include peak shifts, narrowing, or splitting driven by self-phase modulation, group velocity dispersion, and self-steepening. The theoretical model provides complementary temporal traces of pulse propagation and reveals the transition from the birth of a doublet of optical solitons to the formation of a shock wave, both supported by the system. Our results represent an important step in ultrafast nonlinear on-chip polaritonics in perovskite-based systems.

Crystal plasticity (CP) modeling is a vital tool for predicting the mechanical behavior of materials, but its calibration involves numerous (>8) constitutive parameters, often requiring time-consuming trial-and-error methods. This paper proposes a robust calibration approach using Bayesian optimization (BO) to identify optimal CP model parameters under fatigue loading conditions. Utilizing cyclic data from additively manufactured Hastelloy X specimens at 500 degree-F, the BO framework, integrated with a Gaussian process surrogate model, significantly reduces the number of required simulations. A novel objective function is developed to match experimental stress-strain data across different strain amplitudes. Results demonstrate that effective CP model calibration is achieved within 75 iterations, with as few as 50 initial simulations. Sensitivity analysis reveals the influence of CP parameters at various loading points on the stress-strain curve. The results show that the stress-strain response is predominantly controlled by parameters related to yield, with increased influence from backstress parameters during compressive loading. In addition, the effect of introducing twins into the synthetic microstructure on fatigue behavior is studied, and a relationship between microstructural features and the fatigue indicator parameter is established. Results show that larger diameter grains, which exhibit a higher Schmid factor and an average misorientation of approximately 42 degrees +/- 1.67 degree, are identified as probable sites for failure. The proposed optimization framework can be applied to any material system or CP model, streamlining the calibration process and improving the predictive accuracy of such models.

This paper investigates coordinated beamforming using a modular linear array (MLA), composed of a pair of physically separated uniform linear arrays (ULAs), treated as sub-arrays. We focus on how such setups can give rise to near-field effects in 6G networks without requiring many antennas. Unlike conventional far-field beamforming, near-field beamforming enables simultaneous data service to multiple users at different distances in the same angular direction, offering significant multiplexing gains. We present a detailed analysis, including analytical expressions of the beamwidth and beamdepth for the MLA. Our findings reveal that using the MLA approach, we can remove approximately 36% of the antennas in the ULA while achieving the same level of beamfocusing.

Cell-free massive MIMO improves the fairness among the user equipments (UEs) in the network by distributing many cooperating access points (APs) around the region while connecting them to a centralized cloud-computing unit that coordinates joint transmission/reception. However, the fiber cable deployment for the fronthaul transport network and activating all available antennas at each AP lead to increased deployment cost and power consumption for fronthaul signaling and processing. To overcome these challenges, in this work, we consider wireless fronthaul connections and propose a joint antenna activation and power allocation algorithm to minimize the end-to-end (from radio to cloud) power while satisfying the quality-of-service requirements of the UEs under wireless fronthaul capacity limitations. The results demonstrate that the proposed methodology of deactivating antennas at each AP reduces the power consumption by 50% and 84% compared to the benchmarks based on shutting down APs and minimizing only the transmit power, respectively., Comment: Presented in Asilomar Signals, Systems and Computers 2024

Integrated sensing and communication (ISAC) is a promising technology for future mobile networks, enabling sensing applications to be performed by existing communication networks, consequently improving the system efficiency. Millimeter wave (mmWave) signals provide high sensing resolution and high data rate but suffer from sensitivity to blockage. Cell-free massive multiple-input multiple-output (MIMO), with a large number of distributed access points (APs), can overcome this challenge by providing macro diversity against changing blockages and can save energy consumption by deactivating unfavorable APs. Thus, in this work, we propose a joint dynamic AP mode selection and power allocation scheme for mmWave cell-free massive MIMO-ISAC, where APs are assigned either as ISAC transmitters, sensing receivers, or shut down. Due to the large size of the original problem, we propose three different sub-optimal algorithms that minimize the number of active APs while guaranteeing the sensing and communication constraints. Numerical results demonstrate that assigning ISAC transmitters only satisfying communication constraints, followed up by sensing receiver assignment only for sensing constraint achieves the best performance-complexity balance., Comment: Presented in Asilomar Conference on Signals, Systems, and Computers 2024

Exudative (wet) age-related macular degeneration (AMD) is a leading cause of vision loss in older adults, typically treated with intravitreal injections. Emerging therapies, such as subretinal injections of stem cells, gene therapy, small molecules or RPE cells require precise delivery to avoid damaging delicate retinal structures. Autonomous robotic systems can potentially offer the necessary precision for these procedures. This paper presents a novel approach for motion compensation in robotic subretinal injections, utilizing real-time Optical Coherence Tomography (OCT). The proposed method leverages B$^{5}$-scans, a rapid acquisition of small-volume OCT data, for dynamic tracking of retinal motion along the Z-axis, compensating for physiological movements such as breathing and heartbeat. Validation experiments on \textit{ex vivo} porcine eyes revealed challenges in maintaining a consistent tool-to-retina distance, with deviations of up to 200 $\mu m$ for 100 $\mu m$ amplitude motions and over 80 $\mu m$ for 25 $\mu m$ amplitude motions over one minute. Subretinal injections faced additional difficulties, with horizontal shifts causing the needle to move off-target and inject into the vitreous. These results highlight the need for improved motion prediction and horizontal stability to enhance the accuracy and safety of robotic subretinal procedures.

Reconfigurable intelligent surfaces (RISs) can improve the capacity of wireless communication links by passively beamforming the impinging signals in desired directions. This feature has been demonstrated both analytically and experimentally for conventional RISs, consisting of independently reflecting elements. To further enhance reconfigurability, a new architecture called beyond-diagonal RIS (BD-RIS) has been proposed. It allows for controllable signal flows between RIS elements, resulting in a non-diagonal reflection matrix, unlike the conventional RIS architecture. Previous studies on BD-RIS-assisted communications have predominantly considered single-antenna transmitters/receivers. One recent work provides an iterative capacity-improving algorithm for multiple-input multiple-output (MIMO) setups but without providing geometrical insights. In this paper, we derive the first closed-form capacity-maximizing BD-RIS reflection matrix for a MIMO channel. We describe how this solution pairs together propagation paths, how it behaves when the signal-to-noise ratio is high, and what capacity is achievable with ideal semi-unitary channel matrices. The analytical results are corroborated numerically., Comment: 5 pages, 4 figures, EuCAP 2025

In this paper, we present a comprehensive analysis of the contact mechanics associated with a micron-sized sliding asperity, which plays a crucial role in the abrasive wear processes. Utilising nanoscratch testing, we experimentally investigate the deformation and employ High-Resolution Electron Backscatter Diffraction (HR-EBSD) to characterise the resulting strain fields at various locations in the residual nanoscratch. To simulate these experiments, we utilise a physically-based Crystal Plasticity Finite Element (CPFE) model, enabling a three-dimensional simulation that can accurately capture the measured elastic and plastic strain fields around the sliding contact. This knowledge serves as a foundation from which we may be able to discern the multi-physical processes governing micro-scale wear phenomena., Comment: 4 figures

In this paper, we investigate the performance of an integrated sensing and communication (ISAC) system within a cell-free massive multiple-input multiple-output (MIMO) system. Each access point (AP) operates in the millimeter-wave (mmWave) frequency band. The APs jointly serve the user equipments (UEs) in the downlink while simultaneously detecting a target through dedicated sensing beams, which are directed toward a reconfigurable intelligent surface (RIS). Although the AP-RIS, RIS-target, and AP-target channels have both line-of-sight (LoS) and non-line-of-sight (NLoS) parts, it is assumed only knowledge of the LoS paths is available. A key contribution of this study is the consideration of clutter, which degrades the target detection if not handled. We propose an algorithm to alternatively optimize the transmit power allocation and the RIS phase-shift matrix, maximizing the target signal-to-clutter-plus-noise ratio (SCNR) while ensuring a minimum signal-to-interference-plus-noise ratio (SINR) for the UEs. Numerical results demonstrate that exploiting clutter subspace significantly enhances detection probability, particularly at high clutter-to-noise ratios, and reveal that an increased number of transmit side clusters impair detection performance. Finally, we highlight the performance gains achieved using a dedicated sensing stream., Comment: submitted to IEEE ICC25 WORKSHOPS

Robotic platforms provide repeatable and precise tool positioning that significantly enhances retinal microsurgery. Integration of such systems with intraoperative optical coherence tomography (iOCT) enables image-guided robotic interventions, allowing to autonomously perform advanced treatment possibilities, such as injecting therapeutic agents into the subretinal space. Yet, tissue deformations due to tool-tissue interactions are a major challenge in autonomous iOCT-guided robotic subretinal injection, impacting correct needle positioning and, thus, the outcome of the procedure. This paper presents a novel method for autonomous subretinal injection under iOCT guidance that considers tissue deformations during the insertion procedure. This is achieved through real-time segmentation and 3D reconstruction of the surgical scene from densely sampled iOCT B-scans, which we refer to as B5-scans, to monitor the positioning of the instrument regarding a virtual target layer defined at a relative position between the ILM and RPE. Our experiments on ex-vivo porcine eyes demonstrate dynamic adjustment of the insertion depth and overall improved accuracy in needle positioning compared to previous autonomous insertion approaches. Compared to a 35% success rate in subretinal bleb generation with previous approaches, our proposed method reliably and robustly created subretinal blebs in all our experiments.

Accurate estimation of the cascaded channel from a user equipment (UE) to a base station (BS) via each reconfigurable intelligent surface (RIS) element is critical to realizing the full potential of the RIS's ability to control the overall channel. The number of parameters to be estimated is equal to the number of RIS elements, requiring an equal number of pilots unless an underlying structure can be identified. In this paper, we show how the spatial correlation inherent in the different RIS channels provides this desired structure. We first optimize the RIS phase-shift pattern using a much-reduced pilot length (determined by the rank of the spatial correlation matrices) to minimize the mean square error (MSE) in the channel estimation under electromagnetic interference. In addition to considering the linear minimum MSE (LMMSE) channel estimator, we propose a novel channel estimator that requires only knowledge of the array geometry while not requiring any user-specific statistical information. We call this the reduced-subspace least squares (RS-LS) estimator and optimize the RIS phase-shift pattern for it. This novel estimator significantly outperforms the conventional LS estimator. For both the LMMSE and RS-LS estimators, the proposed optimized RIS configurations result in significant channel estimation improvements over the benchmarks., Comment: 16 pages, 9 figures, to appear in IEEE Transactions on Wireless Communications

Modeling of large populations of binary stellar systems is an intergral part of a many areas of astrophysics, from radio pulsars and supernovae to X-ray binaries, gamma-ray bursts, and gravitational-wave mergers. Binary population synthesis codes that employ self-consistently the most advanced physics treatment available for stellar interiors and their evolution and are at the same time computationally tractable have started to emerge only recently. One element that is still missing from these codes is the ability to generate the complete time evolution of binaries with arbitrary initial conditions using pre-computed three-dimensional grids of binary sequences. Here we present a highly interpretable method, from binary evolution track interpolation. Our method implements simulation generation from irregularly sampled time series. Our results indicate that this method is appropriate for applications within binary population synthesis and computational astrophysics with time-dependent simulations in general. Furthermore we point out and offer solutions to the difficulty surrounding evaluating performance of signals exhibiting extreme morphologies akin to discontinuities., Comment: 15 pages, 11 figures, Submitted to ApJ

Integrated sensing and communications (ISAC) allows networks to perform sensing alongside data transmission. While most ISAC studies focus on single-target, multi-user scenarios, multi-target sensing is scarcely researched. This letter examines the monostatic sensing performance of a multi-target massive MIMO system, aiming to minimize the sum of Cram\'er-Rao lower bounds (CRLBs) for target direction-of-arrival estimates while meeting user equipment (UE) rate requirements. We propose several precoding schemes, comparing sensing performance and complexity, and find that sensing-focused precoding with power allocation for communication achieves near-optimal performance with 20 times less complexity than joint precoding. Additionally, time-sharing between communication and sensing outperforms simple time division, highlighting the benefits of resource-sharing for ISAC.

Knowledge about the internal physical structure of stars is crucial to understanding their evolution. The novel binary population synthesis code POSYDON includes a module for interpolating the stellar and binary properties of any system at the end of binary MESA evolution based on a pre-computed set of models. In this work, we present a new emulation method for predicting stellar profiles, i.e., the internal stellar structure along the radial axis, using machine learning techniques. We use principal component analysis for dimensionality reduction and fully-connected feed-forward neural networks for making predictions. We find accuracy to be comparable to that of nearest neighbor approximation, with a strong advantage in terms of memory and storage efficiency. By providing a versatile framework for modeling stellar internal structure, the emulation method presented here will enable faster simulations of higher physical fidelity, offering a foundation for a wide range of large-scale population studies of stellar and binary evolution., Comment: 12 pages, 10 figures. Accepted for publication by Astronomy and Computing

Integrated Sensing and Communication (ISAC) represents a transformative approach within 5G and beyond, aiming to merge wireless communication and sensing functionalities into a unified network infrastructure. This integration offers enhanced spectrum efficiency, real-time situational awareness, cost and energy reductions, and improved operational performance. ISAC provides simultaneous communication and sensing capabilities, enhancing the ability to detect, track, and respond to spectrum dynamics and potential threats in complex environments. In this paper, we introduce I-SCOUT, an innovative ISAC solution designed to uncover moving targets in NextG networks. We specifically repurpose the Positioning Reference Signal (PRS) of the 5G waveform, exploiting its distinctive autocorrelation characteristics for environment sensing. The reflected signals from moving targets are processed to estimate both the range and velocity of these targets using the cross ambiguity function (CAF). We conduct an in-depth analysis of the tradeoff between sensing and communication functionalities, focusing on the allocation of PRSs for ISAC purposes. Our study reveals that the number of PRSs dedicated to ISAC has a significant impact on the system's performance, necessitating a careful balance to optimize both sensing accuracy and communication efficiency. Our results demonstrate that I-SCOUT effectively leverages ISAC to accurately determine the range and velocity of moving targets. Moreover, I-SCOUT is capable of distinguishing between multiple targets within a group, showcasing its potential for complex scenarios. These findings underscore the viability of ISAC in enhancing the capabilities of NextG networks, for both commercial and tactical applications where precision and reliability are critical., Comment: Accepted for publication at the MILCOM'24 conference

The reconfigurable intelligent surface (RIS) technology emerges as a highly useful component of the rapidly evolving integrated sensing and communications paradigm, primarily owing to its remarkable signal-to-noise ratio enhancement capabilities. In this paper, our focus is on mono-static target detection while considering the communication requirement of a user equipment. Both sensing and communication benefit from the presence of an RIS, which makes the channels richer and stronger. Diverging from prior research, we comprehensively examine three target echo paths: the direct (static) channel path, the path via the RIS, and a combination of these, each characterized by distinct radar cross sections (RCSs). We take both the line-of-sight (LOS) and the non-line-of-sight (NLOS) paths into account under a clutter for which the distribution is not known, but the low-rank subspace it resides. We derive the generalized likelihood ratio test (GLRT) detector and introduce a novel approach for jointly optimizing the configuration of RIS phase-shifts and precoding. Our simulation results underscore the paramount importance of this combined design in terms of enhancing detection probability. Moreover, it becomes evident that the derived clutter-aware target detection significantly enhances detection performance, especially when the clutter is strong., Comment: 6 pages, 3 figures, accepted to be presented at IEEE GLOBECOM 2024

A large-scale MIMO (multiple-input multiple-output) system offers significant advantages in wireless communication, including potential spatial multiplexing and beamforming capabilities. However, channel estimation becomes challenging with multiple antennas at both the transmitter and receiver ends. The minimum mean-squared error (MMSE) estimator, for instance, requires a spatial correlation matrix whose dimensions scale with the square of the product of the number of antennas on the transmitter and receiver sides. This scaling presents a substantial challenge, particularly as antenna counts increase in line with current technological trends. Traditional MIMO literature offers alternative channel estimators that mitigate the need to fully acquire the spatial correlation matrix. In this paper, we revisit point-to-point MIMO channel estimation and introduce a reduced-subspace least squares (RS-LS) channel estimator designed to eliminate physically impossible channel dimensions inherent in uniform planar arrays. Additionally, we propose a cluster-aware RS-LS estimator that leverages both reduced and cluster-specific subspace properties, significantly enhancing performance over the conventional RS-LS approach. Notably, both proposed methods obviate the need for fully/partial knowledge of the spatial correlation matrix., Comment: 6 pages, 2 figures, accepted to be presented at IEEE GLOBECOM 2024

In recent years, knowledge graph embedding models have been successfully applied in the transductive setting to tackle various challenging tasks including link prediction, and query answering. Yet, the transductive setting does not allow for reasoning over unseen entities, relations, let alone numerical or non-numerical literals. Although increasing efforts are put into exploring inductive scenarios, inference over unseen entities, relations, and literals has yet to come. This limitation prohibits the existing methods from handling real-world dynamic knowledge graphs involving heterogeneous information about the world. Here, we propose a remedy to this limitation. We propose the attentive byte-pair encoding layer (BytE) to construct a triple embedding from a sequence of byte-pair encoded subword units of entities and relations. Compared to the conventional setting, BytE leads to massive feature reuse via weight tying, since it forces a knowledge graph embedding model to learn embeddings for subword units instead of entities and relations directly. Consequently, the size of the embedding matrices are not anymore bound to the unique number of entities and relations of a knowledge graph. Experimental results show that BytE improves the link prediction performance of 4 knowledge graph embedding models on datasets where the syntactic representations of triples are semantically meaningful. However, benefits of training a knowledge graph embedding model with BytE dissipate on knowledge graphs where entities and relations are represented with plain numbers or URIs. We provide an open source implementation of BytE to foster reproducible research., Comment: 8 pages, 4 figures, ECAI 2024 Workshops (CompAI)

In recent years, several studies have explored deep learning algorithms to predict large-scale signal fading, or path loss, in urban communication networks. The goal is to replace costly measurement campaigns, inaccurate statistical models, or computationally expensive ray-tracing simulations with machine learning models that deliver quick and accurate predictions. We focus on predicting path loss radio maps using convolutional neural networks, leveraging aerial images alone or in combination with supplementary height information. Notably, our approach does not rely on explicit classification of environmental objects, which is often unavailable for most locations worldwide. While the prediction of radio maps using complete 3D environmental data is well-studied, the use of only aerial images remains under-explored. We address this gap by showing that state-of-the-art models developed for existing radio map datasets can be effectively adapted to this task, achieving strong performance. Additionally, we introduce a new model that slightly exceeds the performance of the present state-of-the-art with reduced complexity. The trained models are differentiable, and therefore they can be incorporated in various network optimization algorithms. While an extensive discussion is beyond this paper's scope, we demonstrate this through an example optimizing the directivity of base stations in cellular networks via backpropagation to enhance coverage., Comment: 12 pages, 8 Figures, This work has been submitted to the IEEE for possible publication. arXiv admin note: substantial text overlap with arXiv:2402.00878

In this work, we study metric-Palatini gravity extended by the antisymmetric part of the affine curvature. This gravity theory leads to general relativity plus a geometric Proca field. Using our previous construction of its static spherically-symmetric AdS solution [Eur. Phys. J. C83 (2023) 4, 318], we perform a detailed analysis in this work using the observational quasiperiodic oscillations (QPOs) data. To this end, we use the latest data from stellar-mass black hole GRO J1655-40, intermediate-mass black hole in M82-X1, and the super-massive black hole in SgA* (our Milky Way) and perform a Monte-Carlo-Markov-Chain (MCMC) analysis to determine or bound the model parameters. Our results shed light on the allowed ranges of the Proca mass and other parameters. The results imply that our solutions can cover all three astrophysical black holes. Our analysis can also be extended to more general metric-affine gravity theories., Comment: 16 pages, 10 figures. Accepted for publication in European Physical Journal C. Dedicated to Durmu\c{s} Demir (1967-2024), our supervisor and candid friend

Random Feature Model (RFM) with a nonlinear activation function is instrumental in understanding training and generalization performance in high-dimensional learning. While existing research has established an asymptotic equivalence in performance between the RFM and noisy linear models under isotropic data assumptions, empirical observations indicate that the RFM frequently surpasses linear models in practical applications. To address this gap, we ask, "When and how does the RFM outperform linear models?" In practice, inputs often have additional structures that significantly influence learning. Therefore, we explore the RFM under anisotropic input data characterized by spiked covariance in the proportional asymptotic limit, where dimensions diverge jointly while maintaining finite ratios. Our analysis reveals that a high correlation between inputs and labels is a critical factor enabling the RFM to outperform linear models. Moreover, we show that the RFM performs equivalent to noisy polynomial models, where the polynomial degree depends on the strength of the correlation between inputs and labels. Our numerical simulations validate these theoretical insights, confirming the performance-wise superiority of RFM in scenarios characterized by strong input-label correlation., Comment: 29 pages, 5 figures

We present a comprehensive numerical study of dynamic phase transitions in the two-dimensional kinetic Ising model under a non-antisymmetric time-dependent magnetic field including a sinusoidal term and a second harmonic component. We demonstrate that the expected antisymmetric property and the scaling behavior of the order parameter are maintained using the recently proposed generalized conjugate field approach. Via a detailed finite-size scaling analysis we compute, for zero-bias field, the set of critical exponents suggesting that the Ising universality class is conserved, even in the absence of half-wave antisymmetry in the time-dependent magnetic field. Our results verify up-to-date experimental observations and provide a deeper understanding of non-equilibrium phase transitions, establishing a broader framework for exploring symmetry-breaking phenomena in driven magnetic systems., Comment: 9 pages, 7 figures, 1 table, version accepted for publication in Phys. Rev. E

Complicated first principles modelling and controller synthesis can be prohibitively slow and expensive for high-mix, low-volume products such as hydraulic excavators. Instead, in a data-driven approach, recorded trajectories from the real system can be used to train local model networks (LMNs), for which feedforward controllers are derived via feedback linearization. However, previous works required LMNs without zero dynamics for feedback linearization, which restricts the model structure and thus modelling capacity of LMNs. In this paper, we overcome this restriction by providing a criterion for when feedback linearization of LMNs with zero dynamics yields a valid controller. As a criterion we propose the bounded-input bounded-output stability of the resulting controller. In two additional contributions, we extend this approach to consider measured disturbance signals and multiple inputs and outputs. We illustrate the effectiveness of our contributions in a hydraulic excavator control application with hardware experiments. To this end, we train LMNs from recorded, noisy data and derive feedforward controllers used as part of a leveling assistance system on the excavator. In our experiments, incorporating disturbance signals and multiple inputs and outputs enhances tracking performance of the learned controller. A video of our experiments is available at https://youtu.be/lrrWBx2ASaE.

Cell-free massive MIMO (multiple-input multiple-output) is a promising network architecture for beyond 5G systems, which can particularly offer more uniform data rates across the coverage area. Recent works have shown how reconfigurable intelligent surfaces (RISs) can be used as relays in cell-free massive MIMO networks to improve data rates further. In this paper, we analyze an alternative architecture where an RIS is integrated into the antenna array at each access point and acts as an intelligent transmitting surface to expand the aperture area. This approach alleviates the multiplicative fading effect that normally makes RIS-aided systems inefficient and offers a cost-effective alternative to building large antenna arrays. We use a small number of antennas and a larger number of controllable RIS elements to match the performance of an antenna array whose size matches that of the RIS. In this paper, we explore this innovative transceiver architecture in the uplink of a cell-free massive MIMO system for the first time, demonstrating its potential benefits through analytic and numerical contributions. The simulation results validate the effectiveness of our proposed phase-shift configuration and highlight scenarios where the proposed architecture significantly enhances data rates., Comment: 5 pages, 4 figures, presented at IEEE SPAWC 2024

We introduce a novel embedding method diverging from conventional approaches by operating within function spaces of finite dimension rather than finite vector space, thus departing significantly from standard knowledge graph embedding techniques. Initially employing polynomial functions to compute embeddings, we progress to more intricate representations using neural networks with varying layer complexities. We argue that employing functions for embedding computation enhances expressiveness and allows for more degrees of freedom, enabling operations such as composition, derivatives and primitive of entities representation. Additionally, we meticulously outline the step-by-step construction of our approach and provide code for reproducibility, thereby facilitating further exploration and application in the field.