Search

Background: Droplet digital (dd)PCR is a new-generation PCR technique with high precision and sensitivity; however, the positive and negative droplets are not always effectively separated because of the "rain" phenomenon. We aimed to develop a practical optimization and evaluation process for the ddPCR assay and to apply it to the detection of BRAF V600E in fine-needle aspiration (FNA) specimens of thyroid nodules, as an example., Methods: We optimized seven ddPCR parameters that can affect "rain." Analytical and clinical performance were analyzed based on histological diagnosis after thyroidectomy using a consecutive prospective series of 242 FNA specimens., Results: The annealing time and temperature, number of PCR cycles, and primer and probe concentrations were found to be more important considerations for assay optimization than the denaturation time and ramp rate. The limit of blank and 95% limit of detection were 0% and 0.027%, respectively. The sensitivity of ddPCR for histological papillary thyroid carcinoma (PTC) was 82.4% (95% confidence interval [CI], 73.6%-89.2%). The pooled sensitivity of BRAF V600E in FNA specimens for histological PTC was 78.6% (95% CI, 75.9%-81.2%, I 2 =60.6%)., Conclusions: We present a practical approach for optimizing ddPCR parameters that affect the separation of positive and negative droplets to reduce rain. Our approach to optimizing ddPCR parameters can be expanded to general ddPCR assays for specific mutations in clinical laboratories. The highly sensitive ddPCR can compensate for uncertainty in cytological diagnosis by detecting low levels of BRAF V600E.

Rapid DNA detection is a long-pursuing goal in molecular detection, especially in combating infectious diseases. Loop-mediated isothermal amplification (LAMP) is a robust and prevailing DNA detection method in pathogen detection, which has been drawing broad interest in improving its performance. Herein, we reported a new strategy and developed a new LAMP variant named TLAMP with a superior amplification rate. In this strategy, the turn-back loop primers (TLPs) were devised by ingeniously extending the 5' end of the original loop primer, which conferred the new role of being the inner primer for TLPs while retaining its original function as the loop primer. In theory, based on the bifunctional TLPs, a total of eight basic dumbbell-like structures and four cyclic amplification pathways were produced to significantly enhance the amplification efficiency of TLAMP. With the enhancing effect of TLPs, TLAMP exhibited a significantly reduced amplification-to-result time compared to the conventional six-primer LAMP (typically 1 h), enabling rapid DNA detection within 20 min. Furthermore, TLAMP proved to be about 10 min faster than the fast LAMP variants reported so far, while still presenting comparable sensitivity and higher repeatability. Finally, TLAMP successfully achieved an ultrafast diagnosis of Monkeypox virus (MPXV), capable of detecting as few as 10 copies (0.67copies/μL) of pseudovirus within 20 min using real-time fluorescence assay or within 30 min using a colorimetric assay, suggesting that the proposed TLAMP offers a sensitive, specific, reliable, and, most importantly, ultrafast DNA detection method when facing the challenges posed by infectious diseases., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

PCR-based DNA walking is of efficacy for capturing unknown flanking genomic sequences. Here, an uracil base PCR (UB-PCR) with satisfying specificity has been devised for DNA walking. Primary UB-PCR replaces thymine base with uracil base, resulting in a primary PCR product composed of U-DNAs. A single-primer (primary nested sequence-specific primer) single-cycle amplification, using the four normal bases (adenine, thymine, cytosine, and guanine) as substrate, is then performed on the primary PCR product. Clearly, only those U-DNAs, ended by the primary nested sequence-specific primer at least at one side, will produce the corresponding normal single strands. Next, the single-cycle product undergoes uracil-DNA glycosylase treatment to destroy the U-DNAs, while the normal single strands are unaffected. Afterward, secondary even tertiary PCR is performed to exclusively enrich the target product. The feasibility of UB-PCR has been checked by obtaining unknown sequences bordering the three selected genetic sites., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Herein, we constructed a fluorescence biosensor for the ultra-sensitive analysis of microRNAs (miRNAs) by combining DNA hairpins transition triggered strand displacement amplification (DHT-SDA) with primer exchange reaction (PER). Target miRNA initiated DHT-SDA to facilitate the generation of multiple single-stranded DNA (ssDNA) as PER primer, which was extended into a long ssDNA. The biosensor is successfully utilized in detecting miRNAs with high sensitivity (limit of detection for miRNA-21 was 58 fM) and a good linear relationship between 100 nM and 100 fM. By simply changing the DNA hairpin sequence, the constructed biosensor can be extended to analyze another miRNAs. Moreover, the biosensor has the feasibility of detecting miRNAs in real samples with satisfactory accuracy and reliability. Therefore, the fluorescent biosensor has great application potential in clinical diagnosis., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Efficient isolation and sensitive quantification of Pseudomonas aeruginosa (P. aeruginosa) are crucial for identifying intrauterine infections and preventing the occurrence of intrauterine adhesion (IUA). However, traditional approaches, such as culture-based approach, are time-consuming. Herein, we constructed a detection scaffold by using primer exchange reaction (PER) that integrated the low-speed centrifugation-based isolation and sensitive quantification of target pathogenic bacteria. The established approach possesses several advantages, including (i) the approach is capable of simultaneous isolation and sensitive quantification of target bacteria; (ii) low-speed centrifugation or even manual equipment could be used to isolate target bacteria; and (iii) a low limit of detection was obtained as 54 cfu/mL. Based on this, the approach is a promising approach in analyzing P. aeruginosa from uterine secretions with IUA., (© 2023. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Nucleic acid amplification, the bedrock of biotechnology and molecular diagnostics, surges in applications-especially isothermal approaches-heightening the demand for advanced and precisely engineered methods. Here, a novel approach for amplifying DNA with multiarm priming and looping optimization of nucleic acid (AMPLON) is presented. AMPLON relies on a novel polymeric material with unique set of multiarm polyethylene glycol-DNA primers for efficient DNA amplification under isothermal conditions. Each arm carries single-stranded DNA complementing the sense or antisense sequence of the target DNA. The amplification reaction begins with antisense arms binding to the target DNA, forming a template for sense-carrying arms to direct multiarm large DNA amplicon synthesis through successive DNA looping and unlooping steps. Using human immunodeficiency virus type 1 (HIV-1) as a model clinical target, AMPLON exhibits high sensitivity, detecting target concentrations as low as 100 copies mL -1 . Compared to a quantitative real-time polymerase chain reaction assay using sensitive primers, AMPLON reliably identifies HIV-1 RNA in plasma samples (n = 20) with a significant agreement rate of 95%. With its ability to achieve highly specific and sensitive target amplification within 30 min, AMPLON holds immense potential to transform the field of nucleic acid research and unleashing new possibilities in medicine and biotechnology., (© 2024 The Authors. Advanced Materials published by Wiley‐VCH GmbH.)

Asymmetric PCR is widely used to produce single-stranded amplicons (ss-amplicons) for various downstream applications. However, conventional asymmetric PCR schemes are susceptible to events that affect primer availability, which can be exacerbated by multiplex amplification. In this study, a new multiplex asymmetric PCR approach that combines the amplification refractory mutation system (ARMS) with the homo-Tag-assisted nondimer system (HANDS) is described. ARMS-HANDS (A-H) PCR utilizes equimolar-tailed forward and reverse primers and an excess Tag primer. The tailed primer pairs initiate exponential symmetric amplification, whereas the Tag primer drives linear asymmetric amplification along fully matched strands but not one-nucleotide mismatched strands, thereby generating excess ss-amplicons. The production of ss-amplicons is validated using agarose gel electrophoresis, sequencing, and melting curve analysis. Primer dimer alleviation is confirmed by both the reduced Loss function value and a 20-fold higher sensitivity in an 11-plex A-H PCR assay than in an 11-plex conventional asymmetric PCR assay. Moreover, A-H PCR demonstrates unbiased amplification by its allele quantitative ability in correct identification of all 31 trisomy 21 samples among 342 clinical samples. A-H PCR is a new generation of multiplex asymmetric amplification approach with various applications, especially when sensitive and quantitative detection is required.

In previous reports, we described a PCR cycle control approach in which the hybridization state of optically labeled L-DNA enantiomers of the D-DNA primers and targets determined when the thermal cycle was switched from cooling to heating and heating to cooling. A consequence of this approach is that it also "adapts" the cycling conditions to compensate for factors that affect the hybridization kinetics of primers and targets. It assumes, however, that the hybridization state of the labeled L-DNA analogs accurately reflects the hybridization state of the D-DNA primers and targets. In this report, the Van't Hoff equation is applied to determine the L-DNA concentration and ratio of L-DNA strands required by this assumption. Simultaneous fluorescence and temperature measurements were taken during L-DNA controlled cycling, and the optical and thermal switch points compared as a function of both total L-DNA concentration and ratio of strands. Based on the Van't Hoff relationship and these experimental results, L-DNA best mirrors the hybridization of PCR primers and targets when total L-DNA concentration is set equal to the initial concentration of the D-DNA primer of interest. In terms of strand ratios, L-DNA hybridization behavior most closely matches the behavior of their D-DNA counterparts throughout the reaction when one of the L-DNA strands is far in excess of the other. The L-DNA control algorithm was then applied to the practical case of the SARS-CoV-2 N2 reaction, which has been shown to fail or have a delayed Cq when PCR was performed without nucleic acid extraction. PCR Cq values for simulated "unextracted" PCR samples in a nasopharyngeal background and in an NaCl concentration similar to that of viral transport media were determined using either the L-DNA control algorithm ( N = 6) or preset cycling conditions ( N = 3) and compared to water background controls run in parallel. For preset cycling conditions, the presence of nasopharyngeal background or a high salt background concentration significantly increased Cq, but the L-DNA control algorithm had no significant delay. This suggests that a carefully designed L-DNA-based control algorithm "adapts" the cycling conditions to compensate for hybridization errors of the PCR D-DNA reactants that produce false negatives.

The marine thermophilic archaeon Nanoarchaeum equitans possesses a monomeric primase encompassing the conserved domains of the small catalytic and the large regulatory subunits of archaeoeukaryotic heterodimeric primases in one protein chain. The recombinant protein primes on templates containing a triplet with a central thymidine, thus displaying a pronounced sequence specificity typically observed with bacterial type primases only. The N. equitans primase (NEQ395) is a highly active primase enzyme synthesizing short RNA primers. Termination occurs preferentially at about nine nucleotides, as determined by HPLC analysis and confirmed with mass spectrometry. Possibly, the compact monomeric primase NEQ395 represents the minimal archaeoeukaryotic primase and could serve as a functional and structural model of the heterodimeric archaeoeukaryotic primases, whose study is hindered by engagement in protein assemblies and rather low activity., (© The Author(s) 2023. Published by Oxford University Press on behalf of Nucleic Acids Research.)

Structural features of RNA play an important role in its capability to perform various functions in biological systems. To probe structural features, chemical probes are used to conjugate or cleave RNA at solvent-accessible sites, differentiating between flexible and constrained regions. These conjugates or cleaved products are then detected using reverse transcription (RT), where enzymatic RNA-dependent DNA primer extension is abruptly halted at the conjugation site or cleavage site. Here, we provide an overview of methods to probe RNA structure in vitro using radioactively labeled DNA primers, which provide a highly sensitive method to visualize RT stop sites with gel electrophoresis. © 2023 Wiley Periodicals LLC., (© 2023 Wiley Periodicals LLC.)

Despite continuous improvements, it is difficult to efficiently amplify large sequences from complex templates using current PCR methods. Here, we developed a suppression thermo-interlaced (STI) PCR method for the efficient and specific amplification of long DNA sequences from genomes and synthetic DNA pools. This method uses site-specific primers containing a common 5' tag to generate a stem-loop structure, thereby repressing the amplification of smaller non-specific products through PCR suppression (PS). However, large target products are less affected by PS and show enhanced amplification when the competitive amplification of non-specific products is suppressed. Furthermore, this method uses nested thermo-interlaced cycling with varied temperatures to optimize strand extension of long sequences with an uneven GC distribution. The combination of these two factors in STI PCR produces a multiplier effect, markedly increasing specificity and amplification capacity. We also developed a webtool, calGC, for analyzing the GC distribution of target DNA sequences and selecting suitable thermo-cycling programs for STI PCR. Using this method, we stably amplified very long genomic fragments (up to 38 kb) from plants and human and greatly increased the length of de novo DNA synthesis, which has many applications such as cloning, expression, and targeted genomic sequencing. Our method greatly extends PCR capacity and has great potential for use in biological fields., (Copyright © 2021 The Author. Published by Elsevier Inc. All rights reserved.)

Nowadays, novel Biochemistry lab techniques are being introduced at a very fast pace in scientific research. This requires development of new labs for undergraduate Biochemistry courses to equip the students with up-to-date techniques. However, the time limit of Biochemistry labs for undergraduate students represents a major obstacle. This article presents a clear set of laboratory exercises designed to introduce students to the use of polymerase chain reaction-restriction-fragment length polymorphism (PCR-RFLP) as a means of detection of genetic variants. Three consecutive lab experiments have been designed for the undergraduate students to serve this purpose. The first session was performed in a computer lab (dry lab) where students were taught how to obtain a specific gene sequence, identify an exact single nucleotide polymorphism location, choose the target sequence for amplification, design specific primers for this particular sequence and choose the most suitable restriction enzyme from web tools. The second and third lab sessions were performed as wet labs where in the second lab session, students optimized PCR conditions and performed a successful PCR. The PCR products were kept for use in the third lab session where they utilized the selected restriction enzyme and carried out gel electrophoresis to determine the exact genotype., (© 2022 International Union of Biochemistry and Molecular Biology.)

Reverse transcription of RNA coupled to amplification of the resulting cDNA by the polymerase chain reaction (RT-PCR) is one of the principal molecular technologies in use today, with applications across all areas of science and medicine. In its real-time, fluorescence-based usage (RT-qPCR), it has long been a core technology driving the accurate, rapid and sensitive laboratory diagnosis of infectious diseases. However, RT-qPCR protocols have changed little over the past 30 years, with the RT step constituting a significant percentage of the time taken to complete a typical RT-qPCR assay. When applied to research investigations, reverse transcription has been evaluated by criteria such as maximum yield, length of transcription, fidelity, and faithful representation of an RNA pool. Crucially, however, these are of less relevance in a diagnostic RT-PCR test, where speed and sensitivity are the prime RT imperatives, with specificity contributed by the PCR component. We propose a paradigm shift that omits the requirement for a separate high-temperature RT step at the beginning of an RT-qPCR assay. This is achieved by means of an innovative protocol that incorporates suitable reagents with a revised primer and amplicon design and we demonstrate a proof of principle that incorporates the RT step as part of the PCR assay setup at room temperature. Use of this modification as part of a diagnostic assay will of course require additional characterisation, validation and optimisation of the PCR step. Combining this revision with our previous development of fast qPCR protocols allows completion of a 40 cycle RT-qPCR run on a suitable commercial instrument in approximately 15 min. Even faster times, in combination with extreme PCR procedures, can be achieved.

Ribosomal RNA gene as a high-copy number nucleo-biomarker is extremely conserved among bacteria which limits its application to the discriminative detection approaches. We have developed a colorimetric isothermal amplification method called "single specific primer-LAMP (SSP-LAMP)" requiring only one specific primer for the amplification of the target and applied to the identification of the 16S rRNA gene in the Shigella genus. A region with high sequence homology in the genus and low homology with other bacteria was considered as the most appropriate. In that regard, a 23 bp sequence in the 16S rRNA gene of the genus was targeted based on the alignment of the gene with fifty-three closely related bacterial species, and a single specific primer along with five degenerate primers were designed. Using hydroxy-naphthol blue (HNB) as an indicator and gel electrophoresis, the proposed approach of SSP-LAMP was able to detect S. boydii, S. sonnei, S. flexneri and S. dysenteriae specifically while other species remained unidentified. The SSP-LAMP method could provide a rapid one-pot point-of-care method for molecular diagnostics of pathogens in many circumstances mainly samples with high genetic homogeneity., (Copyright © 2021 Elsevier Inc. All rights reserved.)

Early detection of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has been proven crucial during the efforts to mitigate the effects of the COVID-19 pandemic. Several diagnostic methods have emerged in the past few months, each with different shortcomings and limitations. The current gold standard, RT-qPCR using fluorescent probes, relies on demanding equipment requirements plus the high costs of the probes and specific reaction mixes. To broaden the possibilities of reagents and thermocyclers that could be allocated towards this task, we have optimized an alternative strategy for RT-qPCR diagnosis. This is based on a widely used DNA-intercalating dye and can be implemented with several different qPCR reagents and instruments. Remarkably, the proposed qPCR method performs similarly to the broadly used TaqMan-based detection, in terms of specificity and sensitivity, thus representing a reliable tool. We think that, through enabling the use of vast range of thermocycler models and laboratory facilities for SARS-CoV-2 diagnosis, the alternative proposed here can increase dramatically the testing capability, especially in countries with limited access to costly technology and reagents.

Interconversions between nucleic acid structures play an important role in transcriptional and translational regulation and also in repair and recombination. These interconversions are frequently promoted by nucleic acid chaperone proteins. To monitor their kinetics, Förster resonance energy transfer (FRET) is widely exploited using ensemble fluorescence intensity measurements in pre-steady-state stopped-flow experiments. Such experiments only provide a weighted average of the emission of all species in solution and consume large quantities of materials. Herein, we lift these limitations by combining time-resolved fluorescence (TRF) with droplet microfluidics (DmF). We validate the innovative TRF-DmF approach by investigating the well characterized annealing of the HIV-1 (+)/(-) Primer Binding Sequences (PBS) promoted by a HIV-1 nucleocapsid peptide. Upon rapid mixing of the FRET-labelled (-)PBS with its complementary (+)PBS sequence inside microdroplets, the TRF-DmF set-up enables resolving the time evolution of sub-populations of reacting species and reveals an early intermediate with a ∼50 ps donor fluorescence lifetime never identified so far. TRF-DmF also favorably compares with single molecule experiments, as it offers an accurate control of concentrations with no upper limit, no need to graft one partner on a surface and no photobleaching issues., (© The Author(s) 2021. Published by Oxford University Press on behalf of Nucleic Acids Research.)

Genetic mutations such as single nucleotide polymorphisms (SNP) are known as one of the most common forms which related to various genetic disorders and cancers. Among of the methods developed for efficient detection of such SNP, polymerase chain reaction (PCR) methods are widely used worldwide for its cost and viable advantages. However, the technique to discriminate small amounts of SNP mixed in abundant normal DNA is incomplete due to intrinsic technical problems of PCR such as amplification occurring even in 3'mismatched cases because of high enzyme activity of DNA polymerases. To overcome the issue, specifically designed PCR platform, STexS (SNP typing with excellent specificity) using double stranded oligonucleotides was implemented as a means to emphasize the amplification of SNP templates by decreasing unwanted amplification of 3'mismatched DNA copies. In this study, the results indicate several EGFR mutations were easily detected specifically utilizing the STexS platform. Further trials show the novel method works effectively to discriminate mutations in not only general allele specific (AS)-PCRs, but also amplification refractory mutation system (ARMS)-PCR. The STexS platform will give aid in PCRs targeting potential SNPs or genetically mutated biomarkers in human clinical samples., (© 2021. The Author(s).)

In this study, we aim to develop a novel loop mediated isothermal amplification (LAMP) coupled with TaqMan (LAMP-TaqMan) method for quick qualitative detection of genetically modified organism (GMOs). We designed four LAMP primers and one TaqMan probe for the LAMP-TaqMan detection method to detect the nopaline synthase gene (NOS) terminator in GMOs. This assay enabled the amplification of DNA within ~20 min at a constant temperature of 65 °C. This assay detected as few as five copies of target sequences, which had a high specificity similar to the TaqMan qPCR method. Furthermore, the LAMP-TaqMan detection method was successfully used to amplify and detect DNA from food samples of the major crops (soybean, maize, rice, etc.). In summary, a novel LAMP-TaqMan assay has been developed, which has the similar sensitivity but takes less time than the TaqMan qPCR method. This method offers a novel approach for rapid detection of GMOs in foods., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

As mutations in SARS-CoV-2 virus accumulate rapidly, novel primers that amplify this virus sensitively and specifically are in demand. We have developed a webserver named CoVrimer by which users can search for and align existing or newly designed conserved/degenerate primer pair sequences against the viral genome and assess the mutation load of both primers and amplicons. CoVrimer uses mutation data obtained from an online platform established by NGDC-CNCB (12 May 2021) to identify genomic regions, either conserved or with low levels of mutations, from which potential primer pairs are designed and provided to the user for filtering based on generalized and SARS-CoV-2 specific parameters. Alignments of primers and probes can be visualized with respect to the reference genome, indicating variant details and the level of conservation. Consequently, CoVrimer is likely to help researchers with the challenges posed by viral evolution and is freely available at http://konulabapps.bilkent.edu.tr:3838/CoVrimer/., (Copyright © 2021 Elsevier Inc. All rights reserved.)

Infections due to triazole-resistant Aspergillus fumigatus are increasingly reported worldwide and are associated with treatment failure and mortality. The principal class of azole-resistant isolates is characterized by tandem repeats of 34 bp or 46 bp within the promoter region of the cyp51A gene. Loop-mediated isothermal amplification (LAMP) is a widely used nucleic acid amplification system that is fast and specific. Here we describe a LAMP assay method to detect the 46 bp tandem repeat insertion in the cyp51A gene promoter region based on novel LAMP primer sets. It also differentiated strains with TR 46 tandem repeats from those with TR 34 tandem repeats. These results showed this TR 46 -LAMP method is specific, rapid, and provides crucial insights to develop novel antifungal therapeutic strategies against severe fungal infections due to A. fumigatus with TR 46 tandem repeats., (© 2021. The Author(s).)

As viruses have been threatening global public health, fast diagnosis has been critical to effective disease management and control. Reverse-transcription quantitative polymerase chain reaction (RT-qPCR) is now widely used as the gold standard for detecting viruses. Although a multiplex assay is essential for identifying virus types and subtypes, the poor multiplicity of RT-qPCR makes it laborious and time-consuming. In this paper, we describe the development of a multiplex RT-qPCR platform with hydrogel microparticles acting as independent reactors in a single reaction. To build target-specific particles, target-specific primers and probes are integrated into the particles in the form of noncovalent composites with boron nitride nanotubes (BNNTs) and carbon nanotubes (CNTs). The thermal release characteristics of DNA, primer, and probe from the composites of primer-BNNT and probe-CNT allow primer and probe to be stored in particles during particle production and to be delivered into the reaction. In addition, BNNT did not absorb but preserved the fluorescent signal, while CNT protected the fluorophore of the probe from the free radicals present during particle production. Bicompartmental primer-incorporated network (bcPIN) particles were designed to harness the distinctive properties of two nanomaterials. The bcPIN particles showed a high RT-qPCR efficiency of over 90% and effective suppression of non-specific reactions. 16-plex RT-qPCR has been achieved simply by recruiting differently coded bcPIN particles for each target. As a proof of concept, multiplex one-step RT-qPCR was successfully demonstrated with a simple reaction protocol.

Intramolecular secondary structures within templates have been shown to lower PCR performance. Whereas many approaches have been developed to mitigate such impairment on PCR, their effects can vary greatly depending on template sequences. Here we present a novel, universally effective approach to improve PCR performance involving specifically designed oligonucleotides called disruptors. A disruptor contained three functional components, an anchor designed to initiate template binding, an effector to disrupt intramolecular secondary structure, and a 3' blocker to prevent its elongation by DNA polymerase. A functional mechanism for a disruptor to improve PCR efficiency was proposed where anchor first binds to template followed by effector-mediated strand displacement to unwind intramolecular secondary structure. Such a mechanism was consistent with the observation that anchor played a more critical role for disruptor function. As an example of potential disruptor applications, inverted terminal repeat sequences of recombinant adeno-associated virus vectors were successfully amplified in the presence of disruptors despite their well-known reputation as some of the most difficult templates for PCR amplification and Sanger sequencing due to their ultra-stable T-shaped hairpin structures. In stark contrast, both DMSO and betaine, two PCR additives routinely used to facilitate PCR amplification and Sanger sequencing of GC-rich templates, did not demonstrate any improving effect., (Copyright © 2021 Elsevier Inc. All rights reserved.)

Technological advancements have revolutionized ancient and degraded DNA analysis, moving the field to the Next Generation Sequencing era. One of the advancements, the ancient DNA-oriented high-throughput library preparation methods, enabled the sequencing of more endogenous molecules. Although fairly optimized, both single- and double-stranded library preparation methods hold the potential for further improvement. Here, we test a series of modifications made at different steps of both single- and double-stranded library preparation methods. Given all the modifications tested, we found that two of them provide further benefits, including the use of Endonuclease VIII as a pre-treatment step before preparing single-stranded libraries and the use of a modified second adapter of the single stranded-libraries as an alternative option to enable sequencing of single stranded-libraries with the standard Illumina sequencing primer instead of the custom designed as described in the single stranded library preparation method. Furthermore, we propose uracil-DNA-glycosylase (UDG) could also be considered for both single- and double-stranded library preparation methods, although additional parameters should be taken into account depending on the sequencing strategy and the sample characteristics. Further modifications were also tested and although they were not advantageous, they could be considered as equivalent to the published options., (Copyright © 2021 Elsevier Inc. All rights reserved.)

DNA holds significant promise as a data storage medium due to its density, longevity, and resource and energy conservation. These advantages arise from the inherent biomolecular structure of DNA which differentiates it from conventional storage media. The unique molecular architecture of DNA storage also prompts important discussions on how data should be organized, accessed, and manipulated and what practical functionalities may be possible. Here we leverage thermodynamic tuning of biomolecular interactions to implement useful data access and organizational features. Specific sets of environmental conditions including distinct DNA concentrations and temperatures were screened for their ability to switchably access either all DNA strands encoding full image files from a GB-sized background database or subsets of those strands encoding low resolution, File Preview, versions. We demonstrate File Preview with four JPEG images and provide an argument for the substantial and practical economic benefit of this generalizable strategy to organize data.

Background: Telomerase is a ribonucleoprotein enzyme responsible for maintenance of telomere length which expressed in more than 85% of cancer cells but undetectable in most normal tissue cells. Therefore, telomerase serves as a diagnostic marker of cancers. Two commonly used telomerase activity detection methods, the telomerase repeated amplification protocol (TRAP) and the direct telomerase assay (DTA), have disadvantages that mainly arise from reliance on PCR amplification or the use of an isotope. A safe, low-cost and reliable telomerase activity detection method is still lacking., Method: We modified DTA method using biotin-labeled primers (Biotin-DTA) and optimized the method by adjusting cell culture temperature and KCl concentration. The sensitivity of the method was confirmed to detect endogenous telomerase activity. The reliability was verified by detection of telomerase activity of published telomerase regulators. The stability was confirmed by comparing the method with TRAP method., Results: Cells cultured in 32°C and KCl concentration at 200 mM or 250 mM resulted in robust Biotin-DTA signal. Endogenous telomerase activity can be detected, which suggested an similar sensitivity as DTA using radioactive isotope markers. Knockdown of telomerase assembly regulator PES1 and DKC1 efficiently reduced telomerase activity. Compared with TRAP method, Biotin-DTA assay offers greater signal stability over a range of analyte protein amounts., Conclusion: Biotin-labeled, PCR-free, and nonradioactive direct telomerase assay is a promising new method for the easy, low-cost, and quantitative detection of telomerase activity., (© 2021 The Authors. Journal of Clinical Laboratory Analysis published by Wiley Periodicals LLC.)

Purpose: Current polymerase chain reaction (PCR) methods for the diagnosis of infections are time consuming and require large sample volume and skilled technicians. We developed a novel, easy-to-use, and rapid (processing time, 1 minute; total time, 33 minutes) multiplex real-time PCR test (Direct Strip PCR) that did not require DNA extraction to detect 9 pathogens that could cause uveitis in 20-μl samples., Design: Multicenter prospective evaluation of a diagnostic PCR test., Participants: A total of 511 participants (patients with infectious uveitis and controls) were examined at 18 institutes worldwide., Methods: After validation, intraocular fluid samples were subjected to etiologic or exclusive diagnosis, including intraoperative rapid diagnosis., Main Outcome Measures: The concordance and correlations between Direct Strip PCR and quantitative PCR (qPCR) results., Results: Direct Strip PCR exhibited rapid detection, good repeatability and specificity, long storage stability, and detection ability equal to that of qPCR. It also showed low interinstitutional variability compared with qPCR, even when PCR beginners used various real-time PCR machines. The Direct Strip PCR for 9 pathogens exhibited high concordance against the qPCR (positive concordance rate, 98.8%-100%; negative concordance rate, 99.8%-100%; κ coefficient, 0.969-1.000; P < 0.001-0.031). Additionally, results obtained using Direct Strip PCR and qPCR were highly correlated (ρ = 0.748; P < 0.001). This assay was used for rapid intraoperative diagnosis., Conclusions: The Direct Strip PCR test may improve the prognosis of various infectious diseases because it facilitates rapid etiologic evaluation at the first hospital visit and can be used for intraoperative diagnosis., (Copyright © 2020 American Academy of Ophthalmology. Published by Elsevier Inc. All rights reserved.)

Novel coronavirus disease (COVID-19) caused by SARS-CoV-2 is an ongoing global pandemic associated with high rates of morbidity and mortality. RT-qPCR has become the diagnostic standard for the testing of SARS-CoV-2 in most countries. COVID-19 diagnosis generally relies upon RT-qPCR-mediated identification of SARS-CoV-2 viral RNA, which is costly, labor-extensive, and requires specialized training and equipment. Herein, we established a novel one-tube rapid diagnostic approach based upon formamide and colorimetric RT-LAMP (One-Pot RT-LAMP) that can be used to diagnose COVID-19 without the extraction of specific viral RNA. The technique could visually detect SARS-CoV-2 within 45 min with a limit of detection of 5 copies per reaction in extracted RNA, and about 7.66 virus copies per μL in viral transport medium. The One-Pot RT-LAMP test showed a high specificity without cross-reactivity with 12 viruses including SARS-CoV, MERS-CoV, and human infectious influenza virus (H1N1/H3N2 of influenza A and B virus, ect. We validated this One-Pot RT-LAMP approach by its successful use for the analysis of 45 clinical nasopharyngeal swab samples, yielding results identical to those of traditional RT-qPCR analyses, while achieving good selectivity and sensitivity relative to a commercial RT-qPCR approach. As such, this One-Pot RT-LAMP technology may be a valid means of conducting high-sensitivity, low-cost and rapid SARS-CoV-2 identification without the extraction of viral RNA., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

The real time PCR (qPCR) method provides a powerful method to assess levels of particular species of DNA. When combined with reverse transcription (RT-qPCR) it is the predominate technique to measure expression of gene transcripts. While this approach is very powerful, particular care must be taken in the design of the primers to facilitate specific and sensitive detection. Herein describes the framework for an undergraduate assignment which aims to teach primer design for SYBR based RT-qPCR. Beyond gaining direct experience with primer design, students will gain familiarity with important bioinformatic resources as well as a deeper theoretical understanding of the RT-qPCR approach and potential limitations. Moreover, as students' progress through the assignment they re-encounter many important concepts in molecular biology, gene expression, and nucleic acids, creating an opportunity for spiral learning. As this exercise only requires access to free web-based resources and does not require a laboratory it can be used in most science education settings. Despite not being a wet lab, this is a highly authentic research experience as this design process is commonplace in a molecular biology laboratory. Furthermore, the assignment is highly adaptable for different learning outcomes, time frames, and student background and ability. This article seeks to highlight connections and expanded learning outcomes for those already teaching such material, as well as a step-by-step guide for those new to teaching such content., (© 2020 International Union of Biochemistry and Molecular Biology.)

Evolution of xeno nucleic acid (XNA) world essentially requires template-directed synthesis of XNA polymers. In this study, we demonstrate template-directed synthesis of an acyclic XNA, acyclic L-threoninol nucleic acid (L-aTNA), via chemical ligation mediated by N-cyanoimidazole. The ligation of an L-aTNA fragment on an L-aTNA template is significantly faster and occurs in considerably higher yield than DNA ligation. Both L-aTNA ligation on a DNA template and DNA ligation on an L-aTNA template are also observed. High efficiency ligation of trimer L-aTNA fragments to a template-bound primer is achieved. Furthermore, a pseudo primer extension reaction is demonstrated using a pool of random L-aTNA trimers as substrates. To the best of our knowledge, this is the first example of polymerase-like primer extension of XNA with all four nucleobases, generating phosphodiester bonding without any special modification. This technique paves the way for a genetic system of the L-aTNA world.

RNA folds into secondary structures that can serve in understanding various RNA functions (Weeks KM. Curr Opin Struct Biol 20(3):295-304, 2010). Chemical probing is a method that enables the characterization of RNA secondary structures using chemical reagents that specifically modify RNA nucleotides that are located in single-stranded areas. In our protocol, we used Dimethyl Sulfate (DMS) and Cyclohexyl-3-(2-Morpholinoethyl) Carbodiimide metho-p-Toluene sulfonate (CMCT) that are both base-specific modifying reagents (Behm-Ansmant I, et al. J Nucleic Acids 2011:408053, 2011). These modifications are mapped by primer extension arrests using 5' fluorescently labeled primers. In this protocol, we show a comprehensive method to identify RNA secondary structures in vitro using fluorescently labeled oligos. To demonstrate the efficiency of the method, we give an example of a structure we have designed which corresponds to a part of the 5'-UTR regulatory element called Translation Inhibitory Element (TIE) from Hox a3 mRNA (Xue S, et al. Nature 517(7532):33-38, 2015).

Adeno-associated virus (AAV) is a helper-dependent single-stranded DNA parvovirus. Over the years, AAV has become the vector of choice in the gene therapy field due to its safety profile and low immunogenicity. With a carrying capacity of 4.2 kbp, these vectors have demonstrated their clinical value, especially in the field of ophthalmology. Herein we describe methods for the molecular design and packaging of AAV viral vectors. These methods apply to the design of single-stranded or self-complementary AAV vectors.

Background: Spinal muscular atrophy (SMA) is an autosomal recessive neuromuscular disorder mainly caused by homozygous deletions that include exon 7 of the survival motor neuron 1 (SMN1) gene. A nearby paralog gene, SMN2, obstructs the specific detection of SMN1. We optimized a duplexed real-time PCR approach using locked nucleic acid (LNA)-modified primers to specifically detect SMN1., Methods: An LNA-modified primer pair with 3' ends targeting SMN1 specific sites c.835-44g and c.840C was designed, and its specificity was examined by real-time PCR and Sanger Sequencing. A duplexed real-time PCR approach for amplifying SMN1 and control gene albumin (ALB) was developed. A randomized double-blind trial with 97 fresh peripheral blood samples and 25 dried blood spots (DBS) was conducted to evaluate the clinical efficacy of the duplexed approach. This new approach was then used to screen 753 newborn DBS., Results: The LNA-modified primers exhibited enhanced specificity and 6.8% increased efficiency for SMN1 amplification, compared with conventional primers. After stabilizing the SMN1 test by optimizing the duplexed real-time PCR approach, a clinical trial validated that the sensitivity and specificity of our new approach for detecting SMA patients and carriers was 100%. Using this new approach, 15 of the screened 753 newborns were identified as carriers via DBS, while the rest were identified as normal individuals. These data reveal a carrier rate of 1.99% in Hunan province, South Central China., Conclusions: We have developed a novel, specific SMN1 detection approach utilizing real-time PCR with LNA-modified primers, which could be applied to both prenatal carrier and newborn screening.

SARS-CoV-2 testing is crucial to controlling the spread of this virus, yet shortages of nucleic acid extraction supplies and other key reagents have hindered the response to COVID-19 in the US. Several groups have described loop-mediated isothermal amplification (LAMP) assays for SARS-CoV-2, including testing directly from nasopharyngeal swabs and eliminating the need for reagents in short supply. Frequent surveillance of individuals attending work or school is currently unavailable to most people but will likely be necessary to reduce the ~50% of transmission that occurs when individuals are nonsymptomatic. Here we describe a fluorescence-based RT-LAMP test using direct nasopharyngeal swab samples and show consistent detection in clinically confirmed primary samples with a limit of detection (LOD) of ~625 copies/μl, approximately 100-fold lower sensitivity than qRT-PCR. While less sensitive than extraction-based molecular methods, RT-LAMP without RNA extraction is fast and inexpensive. Here we also demonstrate that adding a lysis buffer directly into the RT-LAMP reaction improves the sensitivity of some samples by approximately 10-fold. Furthermore, purified RNA in this assay achieves a similar LOD to qRT-PCR. These results indicate that high-throughput RT-LAMP testing could augment qRT-PCR in SARS-CoV-2 surveillance programs, especially while the availability of qRT-PCR testing and RNA extraction reagents is constrained., Competing Interests: The authors have declared that no competing interests exist.

Multiplex PCR encounters difficulties in primer designing with all the primer pairs working at the same annealing temperature. In this study, we have developed a double-strand primer-mediated multiple strand displacement reaction for the detection of SARS-COV-2 ORF, N and E genes (as examples). The double primer is composed of a 5'-modified fluorophore strand, which does not impact polymerase extension and a 3'-modified quencher strand, which cannot impact elongation. At the annealing temperature, the fluorophore strand combined with the template, extended and resulted in fluorescence signal release. Results showed that the double-strand primer relatively exhibits a wide annealing temperature range and good compatibility between three pairs of primers and probes. These merits allow the simple and multiplex real-time fluorescence quantification of nucleic acids. The detection limit was 400 copies/mL, and the detection time was approximately 2 h. In addition to its extreme specificity and simplicity, this method has a wide range of applications such as multiple PCR and SNP detection.

Objective: This study aimed to evaluate the sensitivity and specificity of a PCR-based novel technique for the detection of BRAF mutation in early stages of the cancer., Methods: Different lengths of primer sets, ranging from 8 bp to 20 bp, were designed and used in this study. These primers were developed by applying on  cancer cell lines. After that, the sensitivity and specificity of the methodology  was evaluated by making serial dilutions., Results: The quantitative allele specific discrimination PCR (QUASAqPCR) primer with 14 bp length was sensitive enough to detect significantly 1:1,000 ratio of BRAFV600E to wild-type background  (P = 0.011), when using 150 nanograms of DNA from cell lines in the reactions., Conclusion: High sensitivity and specificity levels of QUASA-qPCR method can improve diagnostic accuracy for BRAF mutation testing in patients at early stages of cancers and help stratify the appropriate choice of treatment.

DNA has become an attractive medium for long-term data archiving due to its extremely high storage density and longevity. Short single-stranded DNAs, called oligonucleotides (oligos), have been designed and synthesized to store digital data. Previous works designed the oligos with a pair of primer binding sites (PBSs) (each with a length of around 200) attached at the two ends of each basic readable data block. The addition of PBSs decreases the data density significantly because in the current DNA synthesis, the maximum length of a synthesized oligo in good quality is around 200. Furthermore, the maximum homopolymer run allowed by the existing experiments has been reported to be three nucleotides. In this work, to increase the data density, we have devised and tested an oligo design for DNA-based storage with the basic readable data block appended by a single PBS at one end only, while allowing the maximum homopolymer run to be increased to 4. We also present an oligo assembly algorithm that can reconstruct oligos with a single PBS from the error-prone raw readouts obtained from the sequencing process. We have conducted a wet lab experiment to validate the proposed design, where we tested with 398KB of data stored into 10,750 oligos. The experimental results show that it is possible to recover over 99 percent of the oligo sequences without error, which proves that one PBS is sufficient for implementing a DNA-based data storage system with maximum homopolymer run relaxed to 4. The use of single PBS leads to a significant data density gain from 14.3 to 140.2 percent over the existing short-strand DNA data storage schemes by reserving more nucleotides for storing information bits.

A novel genotoxicity sensor was developed based on the base repair process associated with the electrochemiluminescence (ECL) detection of abasic sites in a double-stranded DNA monolayer. This is the first time that an ECL sensor with the ability to identify the removed nucleobases in a DNA duplex has been studied. The successful detection of abasic sites created by DNA glycosylase indicates its further applications for examining some other specific types of DNA damage.

The infection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) that causes the coronavirus disease 2019 (COVID-19) has threatened public health worldwide. The easy human-to-human transmission of this virus has rapidly evolved into a global pandemic. Therefore, to control the community spread of the virus, it is crucial to identify the infected individuals, including asymptomatic people. Hence, a specific and rapid assay is crucial for the early diagnosis and active monitoring of individuals potentially exposed to SARS-CoV-2 for controlling the COVID-19 outbreak. In this study, we have developed the novel lateral flow strip membrane (LFSM) assay that allows the simultaneous detection of RdRp, ORF3a, and N genes using the PCR product obtained by using the single-tube reverse transcription polymerase chain reaction (RT-PCR). The LFSM assay allows detection of SARS-CoV-2 in 30 min at 25 °C after the RT-PCR with the detection limit of 10 copies/test for each gene. The clinical performance of the LFSM assay for the detection of SARS-Cov-2 was evaluated using 162 clinical samples previously detected by using the commercial assay. The percent positive agreement, percent negative agreement, and overall percent agreement of the LFSM assay with the commercial assay were 100% (94.2-100%), 99.0% (94.6-100%), and 99.4% (96.6-100%), respectively. Therefore, the results of the LFSM assay showed significantly high concordance with the commercial assay for the detection of SARS-CoV-2 in clinical specimens. Therefore, we conclude that the developed LFSM assay can be used alone or complementary to the RT-PCR or other methods for the diagnosis and monitoring of the patients to curb community transmission and the pandemic.

Guinea worm Dracunculus medinensis causes debilitating disease in people and is subject to an ongoing global eradication programme. Research and controls are constrained by a lack of diagnostic tools. We developed a specific and sensitive LAMP method for detecting D. medinensis larval DNA in copepod vectors. We were able to detect a single larva in a background of field-collected copepods. This method could form the basis of a "pond-side test" for detecting potential sources of Guinea worm infection in the environment, in copepods, including in the guts of fish as potential transport hosts, enabling research, surveillance and targeting of control measures. The key constraint on the utility of this assay as a field diagnostic, is a lack of knowledge of variation in the temporal and spatial distribution of D. medinensis larvae in copepods in water bodies in the affected areas and how best to sample copepods to obtain a reliable diagnostic sample. These fundamental knowledge gaps could readily be addressed with field collections of samples across areas experiencing a range of worm infection frequencies, coupled with field and laboratory analyses using LAMP and PCR., (Copyright © 2020 The Authors. Published by Elsevier Inc. All rights reserved.)

Sapoviruses are increasingly being recognized as pathogens associated with gastroenteritis in humans. Human sapoviruses are currently assigned to 18 genotypes (GI.1-7, GII.1-8, GIV.1, and GV.1-2) based on the sequence of the region encoding the major structural protein. In this study, we evaluated 11 polymerase chain reaction (PCR) assays using published and newly designed/modified primers and showed that four PCR assays with different primer combinations amplified all of the tested human sapovirus genotypes using either synthetic DNA or cDNA prepared from human sapovirus-positive fecal specimens. These assays can be used as improved broadly reactive screening tests or as tools for molecular characterization of human sapoviruses.

Multiplexed sequencing relies on specific sample labels, the barcodes, to tag DNA fragments belonging to different samples and to separate the output of the sequencers. However, the barcodes are often corrupted by insertion, deletion and substitution errors introduced during sequencing, which may lead to sample misassignment. In this paper, we propose a barcode construction method, which combines a block error-correction code with a predetermined pseudorandom sequence to generate a base sequence for labeling different samples. Furthermore, to identify the corrupted barcodes for assigning reads to their respective samples, we present a soft decision identification method that consists of inner decoding and outer decoding. The inner decoder establishes the hidden Markov model (HMM) for base insertion/deletion estimation with the pseudorandom sequence, and adapts the forward-backward (FB) algorithm to output the soft information of each bit in the block code. The outer decoder performs soft decision decoding using the soft information to effectively correct multiple errors in the barcodes. Simulation results show that the proposed methods are highly robust to high error rates of insertions, deletions and substitutions in the barcodes. In addition, compared with the inner decoding algorithm of the barcodes based on watermarks, the proposed inner decoding algorithm can greatly reduce the decoding complexity.

Objectives: A novel coronavirus (severe acute respiratory syndrome coronavirus 2, SARS-CoV-2) emerged in late 2019, causing an outbreak of pneumonia [coronavirus disease 2019 (COVID-19)] globally. Although the use of ready-made reaction mixes can enable more rapid PCR-based diagnosis of COVID-19, the need to transport and store these mixes at low temperatures presents challenges to already overburdened logistics networks., Methods: Here, we present an optimized freeze-drying procedure that allows SARS-CoV-2 PCR mixes to be transported and stored at ambient temperatures, without loss of activity. Additive-supplemented PCR mixes were freeze-dried. The residual moisture of the freeze-dried PCR mixes was measured by Karl-Fischer titration., Results: We found that the freeze-dried PCR mixes with ~1.2% residual moisture are optimal for storage, transport, and reconstitution. The sensitivity, specificity, and repeatability of the freeze-dried reagents were similar to those of freshly prepared, wet reagents. The freeze-dried mixes retained activity at room temperature (18 ~ 25 °C) for 28 days, and for 14 and 10 days when stored at 37 °C and 56 °C, respectively., Conclusion: The uptake of this approach will ease logistical challenges faced by transport networks and make more cold storage space available at diagnosis and hospital laboratories., (Copyright © 2020 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.)

With the widespread use of single nucleotide variants generated through mutagenesis screens and genome editing technologies, there is pressing need for an efficient and low-cost strategy to genotype single nucleotide substitutions. We have developed a rapid and inexpensive method for detection of point mutants through optimization of SuperSelective (SS) primers for end-point PCR in Caenorhabditis elegans Each SS primer consists of a 5' "anchor" that hybridizes to the template, followed by a noncomplementary "bridge," and a "foot" corresponding to the target allele. The foot sequence is short, such that a single mismatch at the terminal 3' nucleotide destabilizes primer binding and prevents extension, enabling discrimination of different alleles. We explored how length and sequence composition of each SS primer segment affected selectivity and efficiency in various genetic contexts in order to develop simple rules for primer design that allow for differentiation between alleles over a broad range of annealing temperatures. Manipulating bridge length affected amplification efficiency, while modifying the foot sequence altered discriminatory power. Changing the anchor position enabled SS primers to be used for genotyping in regions with sequences that are challenging for standard primer design. After defining primer design parameters, we demonstrated the utility of SS primers for genotyping crude C. elegans lysates, suggesting that this approach could also be used for SNP mapping and screening of CRISPR mutants. Further, since SS primers reliably detect point mutations, this method has potential for broad application in all genetic systems., (Copyright © 2020 by the Genetics Society of America.)

Dickeya solani, one of the most significant bacterial pathogens, infects potato plants, resulting in severe economic damage. In this study, a lateral flow assay (LFA) combined with isothermal DNA amplification was developed for rapid, specific, and sensitive diagnosis of the potato blackleg disease caused by D. solani. Recombinase polymerase amplification (RPA) was chosen for this purpose. Five primer pairs specific to different regions of the D. solani genome were designed and screened. A primer pair providing correct recognition of the target sequence was aligned with the SOL-C region specific to D. solani and flanked by fluorescein (forward primer) and biotin (reverse primer). Lateral flow test strips were constructed to detect DNA amplicons. The RPA-LFA demonstrated a detection limit equal to 14,000 D. solani colony-forming units per gram of potato tuber. This assay provided sensitivity corresponding to the polymerase chain reaction (PCR) but was implemented at a fixed temperature (39 °C) over 30 min. No unspecific reactions with Pectobacterium, Clavibacter, and other Dickeya species were observed. Detection of latent infection of D. solani in the potato tubers by the developed RPA-LFA was verified by PCR. The obtained results confirmed that RPA-LFA has great potential for highly sensitive detection of latent infection., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Purpose: To investigate vitamin D receptor polymorphisms in ocular surface squamous cell neoplasm and to evaluate the relationship between the identified polymorphisms and susceptibility to ocular surface squamous cell neoplasm and the clinical course., Materials and Methods: A totala of 70 patients with ocular surface squamous cell neoplasm (study group) and 75 healthy age and gender-matched individuals (control group) were included in the study. Vitamin D receptor FokI and BsmI polymorphisms were examined. The relationships between histopathological diagnosis, recurrence rates, tumor stage, and identified polymorphisms were investigated., Results: Histopathologically, 43 of the cases were squamous cell carcinoma and 27 of the cases were conjunctival intraepithelial neoplasia. The frequency of FokI (FF, Ff, ff) and BsmI (BB, Bb, bb) polymorphism genotype of vitamin D receptor gene were similar in the groups. The frequency of polymorphism (heterozygous or homozygous) for BsmI (Bb and bb) was significantly higher (p = 0.046) in the study group, while no difference was found between the groups in terms of polymorphic carriers (heterozygous or homozygous) for FokI. There was no correlation between tumor stage, recurrence-polymorphism frequency, and patient age-polymorphism frequency., Conclusion: It is known that active vitamin D inhibits the growth of cancer cells by binding to vitamin D receptor with regulation of genes responsible for cell proliferation. The presence of BsmI polymorphism in vitamin D receptor, in particular bb genotype and b allele, appears to be associated with the susceptibility of ocular surface squamous cell neoplasm. BsmI gene polymorphisms of vitamin D receptor might play an effective role in the formation, progression, and in the course of ocular surface squamous cell neoplasm.

The authors tested the efficacy of two salt nanoparticles (NPs), namely, copper dioxide (CuO) and tri-calcium phosphate [Ca 3 (PO 4 ) 2 ] to induce resistance in green bean pods against grey mould and white rot diseases caused by Botrytis cinerea and Sclerotinia sclerotiorum , respectively. High amounts of phytoalexins, kievitone, coumestrol, phaseollidin, 6-ά-hydroxyphaseollin, and phaseollin, were detected in naturally infected and artificially inoculated green bean pods in response to the tested NPs. Green bean plants treated in the field with CuO and Ca 3 (PO 4 ) 2 NPs had the highest mRNA quantity of all the studied defence genes, receptor-like kinase ( PvRK20 ), pathogenesis-related protein ( PR1 ), 1,3-β-D-glucanase ( pvgluc ), polygalacturonase inhibitor protein ( PvGIP ), and alpha-dioxygenase ( a-DOX ) than that of the control group. CuO NPs followed by Ca 3 (PO 4 ) 2 NPs at 0.15 mg ml -1 were the most potent in increasing the transcriptomic levels of pk20, DOX, PR1, PvGIP, and pvgluc. Field applications of both chemical elicitor NPs exhibited a non-genotoxic effect on the Paulista green bean DNA using eight ISSR primers. The field application of the studied NPs could effectively extend the shelf life of green bean pods by up to 21 days at 7 ± 1°C during marketing and export due to its potent effect against grey mould and white rot diseases.

A terminal-closed linear gene with strong exonuclease resistance and serum stability was successfully constructed by polymerase chain reaction (PCR) with an α-l-threose nucleic acid (TNA) loop modified primer pair, which can be used as an efficient gene expression system in eukaryotic cells for gene delivery.

Reverse transcription-PCR (RT-PCR) is the most widely employed technique for gene expression analysis owing to its high sensitivity, easy reproducibility and fast output. It has been conceived that priming RT reactions with gene-specific primers generates cDNA only from the specific RNA. However, several reports have revealed that cDNA is synthesized even without addition of exogenous primers in RT reactions. Owing to such self-priming activity, the signals from specific strands cannot be accurately detected and can confound the expression analysis, especially in context of overlapping bidirectional transcripts. Here, we demonstrate that purification of biotin-tagged cDNA in conjunction with alkaline denaturation can obviate the problem of background priming and enable accurate strand-specific detection of overlapping transcripts.

Life emerging in an RNA world is expected to propagate RNA as hereditary information, requiring some form of primitive replication without enzymes. Non-enzymatic template-directed RNA primer extension is a model of the copying step in this posited form of replication. The sequence space accessed by primer extension dictates potential pathways to self-replication and, eventually, ribozymes. Which sequences can be accessed? What is the fidelity of the reaction? Does the recently illuminated mechanism of primer extension affect the distribution of sequences that can be copied? How do sequence features respond to experimental conditions and prebiotically relevant contexts? To help answer these and related questions, we here introduce a deep-sequencing methodology for studying RNA primer extension. We have designed and vetted special RNA constructs for this purpose, honed a protocol for sample preparation and developed custom software that analyzes sequencing data. We apply this new methodology to proof-of-concept controls, and demonstrate that it works as expected and reports on key features of the sequences accessed by primer extension., (© The Author(s) 2020. Published by Oxford University Press on behalf of Nucleic Acids Research.)