Search

A Faraday-effect-based radial-interferometer-polarimeter diagnostic has been developed to explore fast magnetic dynamics in high-performance DIII-D plasmas. The instrument measures radial magnetic field perturbations using three chords positioned near the magnetic axis. Newly developed solid-state sources operating at 650 GHz provide phase noise down to 0.01°/kHz and tunable bandwidth up to 10 MHz. Various systematic errors which can contaminate the polarimetric measurement have been investigated in detail. Distortion of circular polarization due to non-ideal optical components is calibrated using a rotating quarter wave plate technique. The impact of perpendicular magnetic field, i.e., the Cotton-Mouton effect, is evaluated. The error due to non-collinearity of probe beams is minimized to less than 0.5° for electron density up to 7 × 1019 m−3 by alignment optimization. Optical feedback, due to multiple reflections induced by the double-pass configuration, is identified and reduced. Coherent and broadband high-frequency magnetic fluctuations for DIII-D H-mode plasmas are observed.A Faraday-effect-based radial-interferometer-polarimeter diagnostic has been developed to explore fast magnetic dynamics in high-performance DIII-D plasmas. The instrument measures radial magnetic field perturbations using three chords positioned near the magnetic axis. Newly developed solid-state sources operating at 650 GHz provide phase noise down to 0.01°/kHz and tunable bandwidth up to 10 MHz. Various systematic errors which can contaminate the polarimetric measurement have been investigated in detail. Distortion of circular polarization due to non-ideal optical components is calibrated using a rotating quarter wave plate technique. The impact of perpendicular magnetic field, i.e., the Cotton-Mouton effect, is evaluated. The error due to non-collinearity of probe beams is minimized to less than 0.5° for electron density up to 7 × 1019 m−3 by alignment optimization. Optical feedback, due to multiple reflections induced by the double-pass configuration, is identified and reduced. Coherent and broadband...

Final design studies in preparation for manufacturing have been performed for functional components of the vacuum portion of the ITER Low-Field Side Reflectometer (LFSR). These components consist of an antenna array, electron cyclotron heating (ECH) protection mirrors, phase calibration mirrors, and vacuum windows. Evaluation of these components was conducted at the LFSR test facility and DIII-D. The antenna array consists of six corrugated-waveguide antennas for simultaneous profile, fluctuation, and Doppler measurements. A diffraction grating, incorporated into the plasma-facing miter bend, provides protection of sensitive components from stray ECH at 170 GHz. For in situ phase calibration of the LFSR profile reflectometer, an embossed mirror is incorporated into the adjacent miter bend. Measurements of the radiated beam profile indicate that these components have a small, acceptable effect on mode conversion and beam quality. Baseline transmission characteristics of the dual-disk vacuum window are obtained and are used to guide ongoing developments. Preliminary simulations indicate that a surface-relief structure on the window surfaces can greatly improve transmission. The workability of real-time phase measurements was demonstrated on the DIII-D profile reflectometer. The new automated real-time analysis agrees well with the standard post-processing routine.

A heterodyne detection scheme is combined with a 10.59 μm CO

Motivated by the need to measure fast equilibrium temporal dynamics, non-axisymmetric structures, and core magnetic fluctuations (coherent and broadband), a three-chord Faraday-effect polarimeter-interferometer system with fast time response and high phase resolution has recently been installed on the DIII-D tokamak. A novel detection scheme utilizing two probe beams and two detectors for each chord results in reduced phase noise and increased time response [δb ∼ 1G with up to 3 MHz bandwidth]. First measurement results were obtained during the recent DIII-D experimental campaign. Simultaneous Faraday and density measurements have been successfully demonstrated and high-frequency, up to 100 kHz, Faraday-effect perturbations have been observed. Preliminary comparisons with EFIT are used to validate diagnostic performance. Principle of the diagnostic and first experimental results is presented.

A full-scale ITER toroidal interferometer and polarimeter (TIP) prototype, including an active feedback alignment system, has been installed and tested on the DIII-D tokamak. In the TIP prototype, a two-color interferometry measurement of line-integrated density is carried out at 10.59 μm and 5.22 μm using a CO2 and quantum cascade laser, respectively, while a separate polarimetry measurement of the plasma-induced Faraday effect is made at 10.59 μm. The TIP prototype is equipped with a piezo tip/tilt stage active feedback alignment system that minimizes noise in the measurement and keeps the diagnostic aligned throughout DIII-D discharges. The measured phase resolution for the polarimeter and interferometer is 0.05° (100 Hz bandwidth) and 1.9° (1 kHz bandwidth), respectively. The corresponding line-integrated density resolution for the vibration-compensated interferometer is δnL = 1.5 × 1018 m-2, and the magnetic field-weighted line-integrated density from the polarimeter is δnBL = 1.5 × 1019 Tm-2. Both interferometer and polarimeter measurements during DIII-D discharges compare well with the expectations based on calculations using Thomson scattering measured density profiles and magnetic equilibrium reconstructions. Additionally, larger bandwidth interferometer measurements show that the diagnostic is a sensitive monitor of core density fluctuations with demonstrated measurements of Alfven eigenmodes and tearing modes.

Recent upgrades to many of the diagnostic systems on DIII-D (Luxon J.L. 2002 Nucl. Fusion 42 614) such as the CO2 interferometer, far-infrared scattering, beam-emission spectroscopy (BES), and quadrature reflectometer have significantly extended their capabilities and made possible the experimental study of Alfven eigenmodes (AEs) through observation of the AE induced density perturbation. Measurements have revealed the presence of several different classes of AEs in DIII-D discharges including the toroidal Alfven eigenmode (TAE), reverse shear AE (RSAE or Alfven cascade) and ellipticity induced Alfven eigenmode. Based on a simple model for the RSAE frequency, a sensitive diagnostic for the evolution of the minimum magnetic safety factor (qmin) is presented and results are compared with motional Stark effect (MSE) measurements. Strong localization of high toroidal mode number RSAEs to regions near the minimum of the magnetic safety factor is exhibited on the CO2 interferometer and BES measurements. Based on this observation, a method for providing constraints on the radial location of qmin is demonstrated and a favourable comparison to MSE measurements is made. Detailed measurements of TAEs using a new all-digital large bandwidth two-colour CO2 interferometer system show a strong asymmetry between vertical and radial viewing interferometer chords confirming previously reported results. Additionally, effects related to line-integrated observations are clearly illustrated by comparison to local BES measurements and potential issues related to this are discussed.

A full-scale 120 m path length ITER toroidal interferometer and polarimeter (TIP) prototype, including an active feedback alignment system, has been constructed and undergone initial testing at General Atomics. In the TIP prototype, two-color interferometry is carried out at 10.59 μm and 5.22 μm using a CO2 and quantum cascade laser (QCL) respectively while a separate polarimetry measurement of the plasma induced Faraday effect is made at 10.59 μm. The polarimeter system uses co-linear right and left-hand circularly polarized beams upshifted by 40 and 44 MHz acousto-optic cells respectively, to generate the necessary beat signal for heterodyne phase detection, while interferometry measurements are carried out at both 40 MHz and 44 MHz for the CO2 laser and 40 MHz for the QCL. The high-resolution phase information is obtained using an all-digital FPGA based phase demodulation scheme and precision clock source. The TIP prototype is equipped with a piezo tip/tilt stage active feedback alignment system responsible for minimizing noise in the measurement and keeping the TIP diagnostic aligned indefinitely on its 120 m beam path including as the ITER vessel is brought from ambient to operating temperatures. The prototype beam path incorporates translation stages to simulate ITER motion through a bake cycle as well as other sources of motion or misalignment. Even in the presence of significant motion, the TIP prototype is able to meet ITER's density measurement requirements over 1000 s shot durations with demonstrated phase resolution of 0.06° and 1.5° for the polarimeter and vibration compensated interferometer respectively. TIP vibration compensated interferometer measurements of a plasma have also been made in a pulsed radio frequency device and show a line-integrated density resolution of m−2.

A heterodyne detection scheme is combined with a 10.59 μm CO2 laser dispersion interferometer for the first time to allow large bandwidth measurements in the 10-100 MHz range. The approach employed utilizes a 40 MHz acousto-optic cell operating on the frequency doubled CO2 beam which is obtained using a high 2nd harmonic conversion efficiency orientation patterned gallium arsenide crystal. The measured standard deviation of the line integrated electron density equivalent phase resolution obtained with digital phase demodulation technique, is 4 × 1017 m−2. Air flow was found to significantly affect the baseline of the phase signal, which an optical table cover was able to reduce considerably. The heterodyne dispersion interferometer (DI) approach is found to be robustly insensitive to motion, with measured phase shifts below baseline drifts even in the presence of several centimeters of retroreflector induced path length variations. Plasma induced dispersion was simulated with a wedged ZnSe plate and the m...

The specific size and structure of the edge current profile has important effects on the magnetohydrodynamic stability and ultimate performance of many advanced tokamak (AT) operating modes. This is true for both bootstrap and externally driven currents that may be used to tailor the edge shear. Absent a direct local measurement of j(r), the best alternative is a determination of the poloidal field. Measurements of the precision (0.1°–0.01° in magnetic pitch angle and 1–10 ms) necessary to address issues of stability and control and provide constraints for EFIT are difficult to do in the region of interest (ρ=0.9–1.1). Using Zeeman polarization spectroscopy of the 2S–2P lithium resonance line emission from the DIII-D LIBEAM [D. M. Thomas, Rev. Sci. Instrum. 66, 806 (1995); D. M. Thomas, A. W. Hyatt, and M. P. Thomas, Rev. Sci. Instrum. 61, 340 (1990)] measurements of the various field components may be made to the necessary precision in exactly the region of interest to these studies. Because of the negli...

Local details of the edge current profile can have profound effects on the stability and ultimate performance of many advanced tokamak (AT) modes1-3. This is true for both bootstrap and externally driven currents that may be used to tailor the edge shear. Absent a direct local measurement of j(r), the best alternative is a determination of the poloidal field. On the DIII-D tokamak4 we are using precision polarimetry of an injected lithium beam (LIBEAM) to make measurements of the necessary precision in the region of interest (ρ = 0.7–1.1)5. Combined polarimetry/spectroscopy of the various Zeeman- split 2S-2P lithium resonance line components gives direct information on the local magnetic field components. Because of the negligible Stark mixing of the relevant atomic levels, this method of determining j(r) is insensitive to the large local electric fields typically found in enhanced confinement (H-mode) edges, and thus avoids an ambiguity present in motional Stark effect (MSE) measurements of B6,7. Beam intensities and energy are suitable for measurements in the edge region of even high density discharges. Key issues for utilizing this technique include good beam quality, an optimum viewing geometry, and a suitable optical pre-filter to isolate the polarized emission line. Details of the existing DIII-D diagnostic are presented. We also discuss details of the analysis necessary to determine the field component from these measurements, and our plans for future improvements to the system.

A fiber optic, heterodyne, two-color interferometer utilizing wavelength division multiplexing technology has been developed for measuring electron density in plasmas. Vibration compensation is accomplished via common path 1.31 and 1.55μm distributed feedback laser interferometers. All beam combining, splitting, frequency modulation, and collimation are accomplished by shared single-mode fiber optic components. Measurements of an argon radio-frequency generated plasma with electron densities of 1020m−3 show effective vibration compensation and typical line-density resolution of approximately 2×1019m−2.