Search

The amount of by-products/waste in the fish industry is roughly 50%. Fish bones could be used to produce nanoparticles, which may have potential use in the food industry as a novel calcium source and at the same time, contribute to reduce waste production. The objective of this study was to evaluate the bioavailability of nano-size salmon fish bone particles compared to micro-size salmon fish bone particles, and calcium carbonate. The study was carried out in 21–28-day-old C57BL/6 male mice fed for 21 days with the experimental diets. The groups were as follows: CaCO3 0.5% Ca (CN 0.5); CaCO3 1.0% Ca (CN 1.0); salmon fish bone (SFB) microparticles 0.5% Ca (MP 0.5); SFB microparticles 1.0% Ca (MP 1.0); SFB nanoparticles 0.5% Ca (NP 0.5); and SFB nanoparticles 1.0% Ca (NP 1.0). Calcium bioavailability, defined as the percent calcium in femur showed an increasing trend from CN 0.5 to NP 1.0 group. According to ANCOVA, the greatest Ca content was observed in the NP 1.0 group compared with all groups but NP 0.5. In conclusion, in a murine model, salmon fish bone nanoparticles present higher calcium bioavailability than salmon fish bone microparticles, and both, in turn, have better bioavailability than calcium carbonate.

The objective of this study was to develop a dried apple snack enriched with probiotics, evaluate its viability using Refractance Window (RWTM) drying, and compare it with conventional hot air drying (CD) and freeze-drying (FD). Apple slices were impregnated with Lacticaseibacillus rhamnosus and dried at 45 °C using RWTM and CD and FD. Total polyphenol content (TPC), color (∆E*), texture, and viable cell count were measured, and samples were stored for 28 days at 4 °C. Vacuum impregnation allowed for a probiotic inoculation of 8.53 log CFU/gdb. Retention values of 6.30, 6.67, and 7.20 log CFU/gdb were observed for CD, RWTM, and FD, respectively; the population in CD, RWTM remained while FD showed a decrease of one order of magnitude during storage. Comparing RWTM with FD, ∆E* was not significantly different (p < 0.05) and RWTM presented lower hardness values and higher crispness than FD, but the RWTM-dried apple slices had the highest TPC retention (41.3%). Microstructural analysis showed that RWTM produced a smoother surface, facilitating uniform moisture diffusion and lower mass transfer resistance. The effective moisture diffusion coefficient was higher in RWTM than in CD, resulting in shorter drying times. As a consequence, RWTM produced dried apple snacks enriched with probiotics, with color and TPC retention comparable to FD.

Freeze-drying (FD) processing preserves foods by combining the most effective traditional technologies. FD conserves the structure, shape, freshness, nutritional/bioactive value, color, and aroma at levels similar to or better than those of refrigerated and frozen foods while delivering the shelf-stable convenience of canned/hot-air-dehydrated foods. The mass transfer rate is the essential factor that can slow down the FD process, resulting in an excessive primary drying time and high energy consumption. The objective of this study was to reduce the FD processing time using CO2 laser technology to improve product competitiveness in the preservation of whole strawberries. The research process consisted of the selection and characterization of fresh strawberries, followed by preparation, pre-treatment, freeze-drying, a primary drying time assessment, and a quality comparison. Experiments were carried out using strawberries without micro-perforation and with five and eight micro-perforations. Quality parameters were determined for fresh, frozen/thawed, and freeze-dried/rehydrated strawberries. It was found that the primary drying time can be significantly reduced by 20% (95% CI) from 26.7 h for non-perforated fruits to 22.3 h when five micro-perforations are made on each strawberry. The quality parameters used to evaluate the strawberries did not show significant differences when comparing frozen/thawed fruits with freeze-dried/rehydrated fruits. The experiments conducted in this study showed that freeze-drying may efficiently compete with freezing technology when processing whole strawberries.

In this study, we present a fractional factorial design approach for exploring the effects and interactions of key synthesis and electrochemical transfer parameters on the roughness and wettability of hexagonal boron nitride (h-BN) coatings, due to their essential role in biofilm formation. The studied parameters for the synthesis process include precursor mass, growth time, and substrate conditioning, whereas for the transfer process, applied voltage and aqueous medium concentration were studied. Through this polynomial model, we confirmed the strong influence of precursor mass and medium concentration parameters on h-BN surface roughness and its resulting antibiofilm properties.

This research studied the use of CO2 LASER microperforation as a pretreatment for the refractive window (RW) drying of apple slices with respect to total polyphenol content (TPC), antioxidant capacity, color ΔE, and product stability under accelerated storage. For this purpose, the processing variables assessed were pore size (200–600 µm), pore density (9–25 pores/cm2), and drying temperature (70–90 °C). As baseline criteria, a comparison with respect to the control without microperforations and samples subjected to conventional tunnel and lyophilization were also considered. The increase in the pore size from 200 to 600 µm resulted in shorter drying times (≤40 min), minimal change in color (ΔE) and loss of TPC, while DPPH was negatively affected by the combined effect of the pore density and the drying temperature. In general, the use of RW with CO2 resulted in apples of higher quality than those obtained in conventional drying and comparable to those obtained through the use of freeze-drying. Finally, during accelerated storage, quality attributes decreased significantly for samples dried at 90 °C regardless of whether microperforations were used, suggesting that a compromise between drying temperature and pore size must be weighed to reduce processing time and to avoid further quality losses during storage.

(1) Background: Discrepancies between children’s self-reports and their parents’ reports on mental health indicators are associated with measurement errors or informant bias. However, they are a valuable tool in understanding the course of child psychopathology. This study aims to determine the level of discrepancies between parents’ perceptions and children’s self-reports in mental health indicators in Northern Chile. (2) Methods: A System of Evaluation of Children and Adolescents self-report (Sistema de Evaluación de Niños y Adolescentes, SENA) was responded to by 408 students between 8 and 13 years old and their parents. (3) Results: Children reported a significantly higher frequency of emotional problems, defiant behavior, and executive functions as compared to their parents’ responses. (4) Conclusions: There is a disjunction between the report of parents and children, which could originate in poor family communication.

Furan and its derivates are present in a wide range of thermally processed foods and are of significant concern in jarred baby and toddler foods. Furan formation is attributed to chemical reactions between a variety of precursors and a high processing temperature. Also, some kinetic models to represent its formation in different food materials have been studied and could predict the furan formation under simulated operating conditions. Therefore, this review aims to analyze and visualize how thermally processed foods might be improved based on optimal control of processing temperature and package design (e.g., retort pouches) to diminish furan formation and maximize quality retention. Many strategies have been studied and applied to reduce furan levels. However, an interesting approach that has not been explored is the thermal process design based on optimum variable retort temperature profiles (VRTPs) and the use of retortable pouches considering the microstructural changes of food along the process. The target of process optimization would be developed by minimizing the microstructural damage of the food product. It could be possible to reduce the furan level and simultaneously preserve the nutritional value through process optimization.

Grapes are a source of native yeasts and lactic acid bacteria (LAB); however, the microbial make up is dependent on the grape cultivar and the regional growth conditions. Therefore, the aim of this study was to characterize the yeast and LAB in seven grape cultivars cultivated in Chile. Grape juices were fermented at 25 °C for 7 days. Samples were collected to analyze sugar, organic acids, and ethanol. Microbial evolution was measured with culture-dependent and molecular approaches. Then, a native isolated Candida oleophila was selected for further sequential fermentations with Saccharomyces cerevisiae. The grape cultivars in the Maule showed a diversity of non-Saccharomyces yeasts, with a greater diversity observed at the beginning of the fermentation. However, species from the Hansenasporia, Metschnikowia, Torulaspora, Lachancea, and Candida genera were detected after 7 days, suggesting tolerance to environments rich in ethanol, capability may be associated to the terroir studied, which is characterized by torrid weather and antique and traditional vineyards. The alcoholic fermentation negatively impacted the LAB population, and after 7 days only Leuconostoc mesenteroides was isolated. In the sequential fermentations, C. oleophila was able to produce fermented grape juices with v/v) alcohol, and low concentrations of malic (0.3 (g/L). To our knowledge this is the first time C. oleophila has been reported as a potential starter culture for wine production. However, more studies are necessary to fully characterize the potential of C. oleophila on wine attributes.

The interaction of biofilms with metallic surfaces produces two biologically induced degradation processes of materials: microbial induced corrosion and bioleaching. Both phenomena affect most metallic materials, but in the case of noble metals such as gold, which is inert to corrosion, metallophilic bacteria can cause its direct or in direct dissolution. When this process is controlled, it can be used for hydrometallurgical applications, such as the recovery of precious metals from electronic waste. However, the presence of unwanted bioleaching-producing bacteria can be detrimental to metallic materials in specific environments. In this work, we propose the use of single-layer graphene as a protective coating to reduce Au bioleaching by Cupriavidus metallidurans, a strain adapted to metal contaminated environments and capable of dissolving Au. By means of Scanning Tunneling Microscopy, we demonstrate that graphene coatings are an effective barrier to prevent the complex interactions responsible for Au dissolution. This behavior can be understood in terms of graphene pore size, which creates an impermeable barrier that prevents the pass of Au-complexing ligands produced by C.metallidurans through graphene coating. In addition, changes in surface energy and electrostatic interaction are presumably reducing bacterial adhesion to graphene-coated Au surfaces. Our findings provide a novel approach to reduce the deterioration of metallic materials in devices in environments where biofilms have been found to cause unwanted bioleaching.

El objetivo de esta investigación es exponer la metodología Kano para el diseño de un sitio web de turismo de aventura (TA). El modelo de los dos factores de Kano permite identificar “la voz del cliente” mediante un cuestionario seccionado en preguntas funcionales y disfuncionales que evalúan los requerimientos de calidad de los usuarios. Se adaptaron las variables utilizadas en el instrumento denominado Webqual, que está fundamentado en la teoría de la acción razonada (TRA) y el modelo de aceptación de la tecnología (TAM).

The authors wish to make the following corrections to this paper [...]

Although biofilm formation is a very effective mechanism to sustain bacterial life, it is detrimental in medical and industrial sectors. Current strategies to control biofilm proliferation are typically based on biocides, which exhibit a negative environmental impact. In the search for environmentally friendly solutions, nanotechnology opens the possibility to control the interaction between biological systems and colonized surfaces by introducing nanostructured coatings that have the potential to affect bacterial adhesion by modifying surface properties at the same scale. In this work, we present a study on the performance of graphene and hexagonal boron nitride coatings (h-BN) to reduce biofilm formation. In contraposition to planktonic state, we focused on evaluating the efficiency of graphene and h-BN at the irreversible stage of biofilm formation, where most of the biocide solutions have a poor performance. A wild Enterobacter cloacae strain was isolated, from fouling found in a natural environment, and used in these experiments. According to our results, graphene and h-BN coatings modify surface energy and electrostatic interactions with biological systems. This nanoscale modification determines a significant reduction in biofilm formation at its irreversible stage. No bactericidal effects were found, suggesting both coatings offer a biocompatible solution for biofilm and fouling control in a wide range of applications.

The olive ridley (Lepidochelys olivacea) is the most common sea turtle to nest in Colombia. El Valle beach is considered the most important nesting beach for this species in South America. Intensive direct capture of nesting females and egg poaching for consumption and local commercial purposes has been a common practice for years. We conducted an analysis of the nesting ecology of the olive ridley on El Valle beach in the northern Pacific of Colombia in 2008. A total of 164 clutches were transferred to an artificial hatchery for protection. The peak of nesting occurred from the second half of August until the end of September, accounting for 64.6 % of all nests. Along the beach, the section most frequently used was Section 3, with 26 % of the nests. The nests were laid mainly in zone 3.69 %. We encountered 55 nesting females and marked 46 of them. Mean CCL was 64.9 ± 2.4 cm and mean CCW was 68.6 ± 2.6 cm. Females laid on average of 87.3 ± 14.2 eggs per clutch. We recorded two nesting events per female, with a mean inter-nesting period of 18.8 ± 4.2 days. The reproductive output for the season was 181.5 ± 34.8 eggs / female. Mean hatching success was 81.1 ± 12.1 % and mean emergence success was 77.6 ± 12.7 %. The incubation period was 65 ± 4.7 days. Our study is a valuable contribution to knowledge of the reproductive ecology of the olive ridley population regionally and globally.

En julio de 2006, se evaluó la estructura de la formación coralina de la Ensenada de Utría, siguiendo el método de intersección continua para organismos sésiles del Sistema Nacional de Monitoreo de Arrecifes Coralinos en Colombia (SIMAC). En Punta Diego, se estableció una estación en un nivel somero; en el Coral de la Aguada, se establecieron tres estaciones con dos niveles de profundidad: somero y medio. Se registraron cinco especies de coral, Pocillopora damicornis, Pocillopora capitata, Pavona varians, Pavona gigantea y Psammocora stellata. Pocillopora damicornis fue la especie con mayor cobertura. En Punta Diego, se estableció un estado de mediana cobertura de coral vivo (hasta de 15.10%) y el Coral de la Aguada se encontró en un estado de buena cobertura de coral vivo (hasta de 56.44%). Sin embargo se registraron altos valores de cobertura de algas tapetes, 76.11% y 83.90% respectivamente para Punta Diego y Coral de la Aguada, una evidente reducción de la cobertura de coral vivo. Esto indica que puede haber factores como eutroficación, altas tasas de sedimentación y sobrepesca que están afectando la estructura y la función de los arrecifes coralinos. Sin embargo no se hallaron diferencias significativas entre los sitios de muestreo, los niveles de profundidad y los componentes del sustrato.