Search

A new screen-printed electrode (SPE) modified with carbon black and ternary oxide (SiO2/TiO2/Nb2O5), denominated SPE/CB/SiTiNb and was developed for the direct detection of triclosan in tap water and mouthwash samples. The morphological characterization and electrochemical behavior of the sensors were performed by scanning electron microscopy, energy dispersive spectroscopy, and cyclic voltammetry. Differential pulse voltammetry was used to evaluate the proposed sensor in Britton–Robinson buffer 0.1 mol L−1 and showed a limit detection of 1.23 nmol L−1 in a linear range from 0.025 to 57.01 µmol L−1. Studies with possible interferents were performed demonstrating a significant selectivity of the sensor to the triclosan oxidation reaction. The sensor was applied in tap water and mouthwash real sample analyses, whose recoveries ranged from 93.4 to 98.8%, demonstrating that the sensor shows promise in the detection of triclosan in different matrices allied to high sensitivity, selectivity, low-cost, portability, disposability, and low sample volume, without pre-treatment, per analysis. [ABSTRACT FROM AUTHOR]

The study aimed to develop an electrochemical sensor based on glassy carbon, mixed oxide (SiO2/TiO2/Sb2O5), and carbon black. The material was synthesized, characterized, and used to determine thiamethoxam in raw honey and water. The morphologic structure and electrochemical performance of the sensor was characterized by scanning electron microscopy and cyclic voltammetry. Differential pulse voltammetry with a concentration of 0.1 mol L−1 of Britton-Robinson buffer at pH 7.0 allowed the generation of a method to determine thiamethoxam in a linear range of 0.25 to 100.5 μmol L−1 and with a limit of detection of 0.012 μmol L−1. The system efficiently quantified traces of thiamethoxam in raw honey and tap water samples. The modified sensor did not present interferences of K+, Na+, Ca2+, Mg2+, glyphosate, imidacloprid, and carbendazim. In addition, the device showed good recovery values for thiamethoxam when applied directly to honey and water samples without any treatment, presenting an electrochemical sensor to monitor real-time hazardous substances in environmental and food matrices. [ABSTRACT FROM AUTHOR]

Electrochemical sensors to quantify concentrations of emerging pollutants have attracted great attention from the industry and scientific community. Nanomaterials such as carbon black have been applied in sensors to identify substances that are toxic to the environment and human health due to their excellent electroanalytical properties. The aim of the study was to develop a novel electrochemical sensor for the endocrine disruptor hormone determination. To our knowledge, for the first time the synthesis of material based on carbon black containing immobilized palladium nanoparticles, with the application for the hormone ethinylestradiol, is reported in the literature. The material was synthesized, characterized, and applied to the determination in tap water and human urine of the synthetic hormone 17α‐ethinylestradiol (EE2), which is currently considered an emerging pollutant. The morphology, structure and electrochemical performance of the sensors were characterized by scanning electron microscopy (SEM) and cyclic voltammetry (CV). Differential pulse voltammetry (DPV) in sodium phosphate buffer solution at pH 5.0 allowed the generation of a method to quantify the concentration of 17α‐ethinylestradiol in a linear range of 0.5–119.0 μmol L−1, obtaining 81.0 nmol L−1 of calculated limit of detection (LOD). The system was efficient in detecting 17α‐ethinylestradiol in real urine samples and showed no interferences for ascorbic acid, uric acid, progesterone, and dopamine. It is noteworthy that the results obtained showed good recovery values, considering that the urine samples were not previously treated or pre‐concentrated, which suggests the development of an electrochemical sensor that works in situ and in real time to monitor relevant substances in the control clinical and environmental, with the possibility of point‐of‐care analyses. [ABSTRACT FROM AUTHOR]

This study presents the development of an electrochemical sensor, denoted as GCE/CB/SiAlSn, based on the modification of a glassy carbon electrode surface with the ternary oxide SiO 2 /Al 2 O 3 /SnO 2 associated with carbon black, for direct determination of the neonicotinoid pesticide clothianidin in different matrices, such as environmental and food samples. Morphological characterization by the scanning electron microscopy technique, electroanalytical analyses using the cyclic voltammetry technique and differential pulse voltammetry are presented which demonstrated that the developed electrochemical platform presents high sensitivity in the electroanalytical clothianidin determination. The linear range studied was from 2.99 × 10 -7 to 6.04 × 10 -5 mol L -1 , with an LOD of 2.47 nmol L -1 . This high sensitivity was explained using the synergistic relationship between carbon black and ternary oxide that maximized the electroactive surface area of the GCE/CB/SiAlSn sensor. Interferent studies were performed that showed high selectivity of the sensor to the pesticide in the presence of Ca 2+ , K + , Na + , and Mg 2+ and carbendazim, glyphosate, imidacloprid and thiamethoxam pesticides. The sensor was applied to real samples of tap water and apple juice obtaining recoveries from 91.0% to 103.0%.

A novel material for the electrochemical determination of endocrine disruptors using a composite based on graphene oxide modified with cadmium telluride quantum dots has been evaluated. The morphology, structure and electrochemical performance of the composite electrodes were characterised by transmission electron microscopy, dynamic light scattering, UV-visible absorption spectra, fluorescence spectra, Raman spectra and cyclic voltammetry. The dynamic light scattering, transmission electronic microscopy and spectrophotometric measurements all showed good distribution of the quantum dots with a small particle size. The electrochemical measurements demonstrated the high performance of the composite response in the presence of a light source. Differential pulse voltammetry allowed the development of a method to determine 17β-estradiol levels in the range from 0.2 to 4.0 μmol L(-1) with a detection limit of 2.8 nmol L(-1) (0.76 μg L(-1))., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)