Search

Cultural heritage is one of the most exceptional resources characterizing the Italian territory. Archaeological heritage, i.e., the archaeological sites with different types of archaeological artifacts, strongly contributes to enriching the national and international cultural heritage. Nevertheless, it is constantly exposed to external factors, such as natural deterioration, anthropic impact, and climate-related hazards, which may compromise its conservation. In Italy, many archaeological areas are affected by significant soil settlements that involve a large part of monuments. This paper focuses on the landslide hazard assessment of the archaeological site of Pietrabbondante (Molise region, Italy). The impact of the expected rainfall regimes, according to the EURO-CORDEX projections, on slope stability conditions were evaluated through the application of a physically based model that couples a hydraulic and a mechanical model to evaluate slope stability evolution due to pore pressure changes. Given the unavoidable lack of knowledge of the geotechnical soil properties in an archaeological heritage area, the proposed method considered the random uncertainty of soil parameters by means of a probabilistic approach in order to assess the stability conditions in terms of probability of occurrence of a landslide. The results of this study provide a reference for the safety assessment and preventive conservation of archaeological areas characterized by high cultural value. [ABSTRACT FROM AUTHOR]

ERA5-Land service has been released recently as an integral and operational component of Copernicus Climate Change Service. Within its set of climatological and atmospheric parameters, it provides soil moisture estimates at different soil depths, represeting an important tool for retrieving saturation degree for predicting natural hazards as shallow landslides. This paper represents an innovative attempt aiming to exploit the use of saturation degree derived from ERA5-Land soil moisture products in a data-driven model to predict the daily probability of occurence of shallow landslides. The study was carried out by investigating a multi-temporal inventory of shallow landslides occurred in Oltrepò Pavese (northern Italy). The achieved results follow: (i) ERA5-Land-derived saturation degree reconstructs well field trends measured in the study area until 1 m from ground; (ii) in agreement with the typical sliding surfaces depth, saturation degree values obtained since ERA5-Land 28–100 cm layer represent a significant predictor for the estimation of temporal probability of occurrence of shallow landslides, able especially to reduce overestimation of triggering events; (iii) saturation degree estimated by ERA5-Land 28–100 cm layer allows to detect soil hydrological conditions leading to triggering in the study area, represented by saturation degree in this layer close to complete saturation. Even if other works of research are required in different geological and geomorphological settings, this study demonstrates that ERA5-Land-derived saturation degree could be implemented to identify triggering conditions and to develop prediction methods of shallow landslides, thanks also to its free availability and constantly updating with a delay of 5 days. [ABSTRACT FROM AUTHOR]

Accurate and long-term rainfall estimates are the main inputs for several applications, spanning from crop modeling to climate analysis. In this study, we present a new rainfall data set (SM2RAIN-CCI) obtained from the inversion of the satellite soil moisture (SM) observations derived from the ESA Climate Change Initiative (CCI) via SM2RAIN (Brocca et al., 2014). Daily rainfall estimates are generated for an 18-year long period (1998-2015), with a spatial sampling of 0.25° on a global scale and are based on the integration of the ACTIVE and the PASSIVE ESA CCI SM data sets. The quality of the SM2RAIN-CCI rainfall data set is evaluated by comparing it with two stateof-art rainfall satellite products, i.e. the Tropical Measurement Mission Multi-satellite Precipitation Analysis 3B42 real-time product (TMPA 3B42RT) and the Climate Prediction Center Morphing Technique (CMORPH), and one modelled data set (ERA-Interim). The assessment is carried out on a global scale at 1° of spatial sampling and 5-day of temporal sampling by comparing these products with the gauge-based Global Precipitation Climatology Centre Full Data Daily (GPCC-FDD) product. SM2RAIN-CCI shows relatively good results in terms of correlation coefficient (median value > 0.56), Root Mean Square Difference (RMSD, median value < 10.34 mm) and BIAS (median value < -14.44 %) during the evaluation period. The validation has been also carried out at original resolution (0.25°) over Europe, Australia and other 5 areas worldwide to test the capabilities of the data set to correctly identify rainfall events under different climate and precipitation regimes. The CCI-SM derived rainfall data set is freely available at http://www.esa-soilmoisture-cci.org at https://doi.org/10.5281/zenodo.846259. [ABSTRACT FROM AUTHOR]

The accurate estimation of rainfall from remote sensing is of paramount importance for many applications as, for instance, the mitigation of natural hazards like floods, droughts, and landslides. Traditionally, microwave observations in the frequency between 10 and 183 GHz are used for estimating rainfall based on the direct interaction of radiation with the hydrometeors within precipitating clouds in a so-called top-down approach. Recently, a bottom-up approach was proposed that uses satellite soil moisture products derived from microwave observations (<10 GHz) for the estimation of accumulated rainfall amounts. The integration of the bottom-up and top-down approaches has large potential for providing high accurate rainfall estimates exploiting their different and complementary nature. In this study, we perform a long-term (3 years) assessment of different satellite rainfall products exploiting the full range of microwave frequencies over Italy. Specifically, the integration of two top-down algorithms (CDRD, Cloud Dynamics and Radiation Database, and PNPR, Passive microwave Neural network Precipitation Retrieval) for estimating rainfall from conically and cross-track scanning radiometers, and one bottom-up algorithm (SM2RAIN) applied to the Advanced SCATterometer soil moisture product is carried out. The performances of the products, individually and merged together, are assessed at daily time scale. The integration of top-down and bottom-up approaches provides the highest performance both in terms of continuous and categorical scores (i.e., median correlation coefficient and root mean square error values equal to 0.71 and 6.62 mm, respectively). In such a combination, the limitations of the two approaches are compensated allowing a better estimation of ground accumulated rainfall through SM2RAIN while, overcoming the limitations of rainfall estimation for intense events during wet conditions through CDRD-PNPR product. The accuracy and the reliability of the merged product open new possibilities for their testing in hydrological applications, such as the monitoring and prediction of floods and droughts over large areas, including regions where ground-based measurements are sparse or not available. [ABSTRACT FROM AUTHOR]

Satellite rainfall products (SRPs) are becoming more accurate with ever increasing spatial and temporal resolution. This evolution can be beneficial for hydrological applications, providing new sources of information and allowing to drive models in ungauged areas. Despite the large availability of rainfall satellite data, their use in rainfall-runoff modelling is still very scarce, most likely due to measurement issues (bias, accuracy) and the hydrological community acceptability of satellite products. In this study, the real-time version (3B42-RT) of Tropical Rainfall Measurement Mission Multi-satellite Precipitation Analysis, TMPA, and a new SRP based on the application of SM2RAIN algorithm ( Brocca et al., 2014 ) to the ASCAT (Advanced SCATterometer) soil moisture product, SM2R ASC , are used to drive a lumped hydrologic model over four basins in Italy during the 4-year period 2010–2013. The need of the recalibration of model parameter values for each SRP is highlighted, being an important precondition for their suitable use in flood modelling. Results shows that SRPs provided, in most of the cases, performance scores only slightly lower than those obtained by using observed data with a reduction of Nash–Sutcliffe efficiency ( NS ) less than 30% when using SM2R ASC product while TMPA is characterized by a significant deterioration during the validation period 2012–2013. Moreover, the integration between observed and satellite rainfall data is investigated as well. Interestingly, the simple integration procedure here applied allows obtaining more accurate rainfall input datasets with respect to the use of ground observations only, for 3 out 4 basins. Indeed, discharge simulations improve when ground rainfall observations and SM2R ASC product are integrated, with an increase of NS between 2 and 42% for the 3 basins in Central and Northern Italy. Overall, the study highlights the feasibility of using SRPs in hydrological applications over the Mediterranean region with benefits in discharge simulations also in well gauged areas. [ABSTRACT FROM AUTHOR]

State-of-the-art rainfall products obtained by satellites are often the only way of measuring rainfall in remote areas of the world. However, it is well known that they may fail in properly reproducing the amount of precipitation reaching the ground, which is of paramount importance for hydrological applications. To address this issue, an integration between satellite rainfall and soil moisture SM products is proposed here by using an algorithm, SM2RAIN, which estimates rainfall from SM observations. A nudging scheme is used for integrating SM-derived and state-of-the-art rainfall products. Two satellite rainfall products are considered: H05 provided by EUMESAT and the real-time (3B42-RT) TMPA product provided by NASA. The rainfall dataset obtained through SM2RAIN, SM2RASC, considers SM retrievals from the Advanced Scatterometer (ASCAT). The rainfall datasets are compared with quality-checked daily rainfall observations throughout the Italian territory in the period 2010-13. In the validation period 2012-13, the integrated products show improved performances in terms of correlation with an increase in median values, for 5-day rainfall accumulations, of 26% (18%) when SM2RASC is integrated with the H05 (3B42-RT) product. Also, the median root-mean-square error of the integrated products is reduced by 18% and 17% with respect to H05 and 3B42-RT, respectively. The integration of the products is found to improve the threat score for medium-high rainfall accumulations. Since SM2RASC, H05, and 3B42-RT datasets are provided in near-real time, their integration might provide more reliable rainfall products for operational applications, for example, for flood and landslide early warning systems. [ABSTRACT FROM AUTHOR]

In African countries, the lack of observed rainfall data is a major obstacle for efficient water resources management. The objective of this study is to evaluate satellite rainfall products' ability to estimate river runoff over 12 basins in Morocco using four hydrological models: IHACRES, MISDc, GR4J, and CREST. Satellite products available with a short latency are compared: EUMETSAT H SAF, SM2RAIN-ASCAT, and IMERG. The best results to reproduce river runoff were obtained with SM2RAIN-ASCAT in combination with the IHACRES model, with the highest Kling-Gupta efficiency criterion and probability of detection of extreme runoff. The hydrological model performances differed across catchments and satellite rainfall products, which highlights the need to carefully select hydrological models for a given application. Thus, it is advisable to evaluate satellite rainfall products with different types of hydrological models. This first evaluation over Moroccan basins suggests that SM2RAIN-ASCAT could be a reliable alternative to observed rainfall for hydrological modelling. [ABSTRACT FROM AUTHOR]

The development of forecasting models for the evaluation of potential slope instability after rainfall events represents an important issue for the scientific community. This topic has received considerable impetus due to the climate change effect on territories, as several studies demonstrate that an increase in global warming can significantly influence the landslide activity and stability conditions of natural and artificial slopes. A consolidated approach in evaluating rainfall-induced landslide hazard is based on the integration of rainfall forecasts and physically based (PB) predictive models through deterministic laws. However, considering the complex nature of the processes and the high variability of the random quantities involved, probabilistic approaches are recommended in order to obtain reliable predictions. A crucial aspect of the stochastic approach is represented by the definition of appropriate probability density functions (pdfs) to model the uncertainty of the input variables as this may have an important effect on the evaluation of the probability of failure (PoF). The role of the pdf definition on reliability analysis is discussed through a comparison of PoF maps generated using Monte Carlo (MC) simulations performed over a study area located in the Umbria region of central Italy. The study revealed that the use of uniform pdfs for the random input variables, often considered when a detailed geotechnical characterization for the soil is not available, could be inappropriate. [ABSTRACT FROM AUTHOR]

State-of-the-art satellite rainfall products are often the only way for measuring precipitation in remote areas of the world. These products are mainly based on the exploitation of microwave (MW) radiometers on board LEO satellites (top-down approach). However, it is well known that they may fail in properly reproducing the amount of precipitation reaching the ground, which is of paramount importance for hydrological applications (natural hazards forecast and mitigation, water management). Currently, one of the major issues impacting the quality of the information retrieved from space is related to the estimation of light precipitation that causes a general underestimation of the total amount of rainfall. This issue is particularly important over land due to the uncertainty and spatial variability of surface emissivity. With the purpose of improving the accuracy of satellite rainfall products, some approaches using satellite soil moisture (SM) data were recently developed (bottom-up approach). In 2013 a new method for estimating rainfall using satellite SM observations, called SM2RAIN, has been proposed. The method is based on the inversion of the soil water balance equation, i.e. it estimates rainfall by using the variation in time of the amount of water stored into to the soil, thus considering it "as a natural rain gauge". SM2RAIN has been applied both at local and global scale with ground- and satellite-based SM data as input with satisfactory results in terms of rainfall estimation. Moreover, previous studies found that the correction of rainfall estimates through SM2RAIN provides improvement in flood modeling. However SM-only based rainfall estimates suffer a number of issues such as the inability to estimate precipitation when the soil is fully saturated, when it is vegetated or snow-covered, besides not providing any precipitation data over the sea. Thus a fully global satellite rainfall product, able to integrate rainfall estimates derived from top-down and bottom-up approaches, has been demonstrated to be highly beneficial for increasing the accuracy of satellite precipitation estimates.Through the EUMETSAT Satellite Application Facility on Support to Operational Hydrology and Water Management (HSAF), the SM2RAIN approach together with the MW-based rainfall product H23 are the scientific background for the development of the "H64 precipitation-soil moisture integrated product". H23 provides daily precipitation estimates by combining MW precipitation rate estimates derived from conical (H01) and cross-track (H02) scanning radiometers. SM estimates obtained through H16 and H101 H SAF products are used to estimate rainfall through SM2RAIN, and then merged with H23 precipitation estimates through a simple nudging scheme. H64 has been designed to combine optimally the two different approaches in order to provide a more reliable rainfall product, that can be used in an operational framework. Preliminary results show that H64 can efficiently reproduce the observed rainfall during a 4-year period, providing a useful and reliable source of information over scarcely instrumented areas. This first assessment provides very useful insights about the development of a near-real time rainfall product based on SM2RAIN and MW-based top-down precipitation products. [ABSTRACT FROM AUTHOR]

Many satellite soil moisture products are today globally available in near real-time. These observations are of paramount importance for enhancing the understanding of the hydrological cycle and particularly useful for flood forecasting purposes. In recent decades, several studies assimilated satellite soil moisture observations into rainfall-runoff models to improve their flood forecasting skills. The rationale is that a better representation of the catchment states leads to a better stream flow estimation. By exploiting the strong physical connection between the soil moisture dynamic and rainfall, some recent studies demonstrated that satellite soil moisture observations can be also used for enhancing the quality of rainfall observations. Given that the quality of the rainfall is one of the main drivers of the hydrological model uncertainty, this begs the question--to what extent updating soil moisture states leads to better flood forecasting skills than correcting rainfall forcing? In this study, we try to answer this question by using rainfall-runoff observations from 10 catchments throughout the Mediterranean area and a continuous rainfall-runoff model--MISDc--forced with reanalysis- and satellite-based rainfall observations. Satellite soil moisture retrievals from the Advanced SCATterometer (ASCAT) are either assimilated into MISDc model via the Ensemble Kalman filter to update model states or, alternatively, used to correct rainfall observations derived from a reanalysis and a satellite-based product through the integration with soil moisture-based rainfall estimates. 4-9 years (depending on the catchment) of stream flow observations are organized into calibration and validation periods to test the two different schemes. Results show that the rainfall correction is favourable if the target is the predictions of high flows while for low flows there is a small advantage of the state correction scheme with respect to the rainfall correction. The improvements for high flows are particularly large when the quality of the rainfall is relatively poor with important implications for large-scale flood forecasting in the Mediterranean area. [ABSTRACT FROM AUTHOR]

Real-time de-noising of satellite-derived soil moisture observations presents opportunities to deliver more accurate and timely satellite data for direct satellite users. So far, the most commonly used techniques for reducing the impact of noise in the retrieved satellite soil moisture observations have been based on moving average filters and Fourier based methods. This paper introduces a new alternative wavelet based approach called Wiener-Wavelet-Based Filter (WiW), which uses an entropy based de-noising method to design a causal version of the filter. WiW is used as a post-retrieval processing tool to enhance the quality of observations derived from one active (the Advanced Scatterometer, ASCAT) and one passive (the Advanced Microwave Scanning Radiometer for Earth Observing System, AMSRE) satellite sensors. The filter is then compared with two candidate de-noising techniques, namely: i) a Wiener causal filter introduced by Su et al. (2013) and ii) a conventional moving average filter. The validation is carried out globally at 173 (for AMSRE) and 243 (for ASCAT) soil moisture stations. Results show that all the three de-noising techniques can increase the agreement between satellite and in situ measurements in terms of correlation and signal-to-noise ratio. The Wiener-based methods show least signal distortion and demonstrate to be conservative in retaining the signal information in de-noised data. Importantly, the Wiener filters can be calibrated with the data at hand, without the need for auxiliary data. [ABSTRACT FROM AUTHOR]

Satellite precipitation products have been largely improved in the recent years particularly with the launch of the global precipitation measurement (GPM) core satellite. Moreover, the development of techniques for exploiting the information provided by satellite soil moisture to complement/enhance precipitation products have improved the accuracy of accumulated rainfall estimates over land. Such satellite enhanced precipitation products, available with a short latency (< 1 day), represent an important and new source of information for river flow prediction and water resources management, particularly in developing countries in which ground observations are scarcely available and the access to such data is not always ensured. In this study, three recently developed rainfall products obtained from the integration of GPM rainfall and satellite soil moisture products have been used; namely GPM+SM2RAIN, PRISM-SMOS, and PRISM-SMAP. The prediction of observed daily river discharge at 10 basins located in Europe (4), West Africa (3) and South Africa (3) is carried out. For comparison, we have also considered three rainfall products based on: (1) GPM only, i.e., the Early Run version of the Integrated Multi-Satellite Retrievals for GPM (GPM-ER), (2) rain gauges, i.e., the Global Precipitation Climatology Centre, and (3) the latest European Centre for Medium-Range Weather Forecasts reanalysis, ERA5. Three different conceptual and lumped rainfall-runoff models are employed to obtain robust and reliable results over the 3-year data period 2015–2017. Results indicate that, particularly over scarcely gauged areas (West Africa), the integrated products outperform both ground- and reanalysis-based rainfall estimates. For all basins, the GPM+SM2RAIN product is performing the best among the short latency products with mean Kling–Gupta Efficiency (KGE) equal to 0.87, and significantly better than GPM-ER (mean KGE = 0.77). The integrated products are found to reproduce particularly well the high flows. These results highlight the strong need to disseminate such integrated satellite rainfall products for hydrological (and agricultural) applications in poorly gauged areas such as Africa and South America. [ABSTRACT FROM AUTHOR]

In a changing climate, assessing the effects that the variation of the expected rainfalls can cause to slope stability is of primary importance. Precipitations are expected to increase, and, in particular, there will be more events characterised by extreme rainfalls, which legitimates the possibility of an increase in landslide activity. A probabilistic physically based model, which takes into account the uncertainty in soil characterisation, has been applied to a study area in central Italy, forced with different scenarios of expected rainfalls. The results of the prediction are compared in terms of variation of percentage of unstable territory. It is observed that the projection of the expected rainfall produces a general increase of the number of potentially unstable zones. Although many uncertainties in the analyses of the climatic trends and in their related effects at the ground still exist, the presented approach shows that physically based methods can be used to support quantitative projections of the expected impacts. [ABSTRACT FROM AUTHOR]

Long-term gridded precipitation products are crucial for several applications in hydrology, agriculture and climate sciences. Currently available precipitation products suffer from space and time inconsistency due to the non-uniform density of ground networks and the difficulties in merging multiple satellite sensors. The recent "bottom-up" approach that exploits satellite soil moisture observations for estimating rainfall through the SM2RAIN (Soil Moisture to Rain) algorithm is suited to build a consistent rainfall data record as a single polar orbiting satellite sensor is used. Here we exploit the Advanced SCATterometer (ASCAT) on board three Meteorological Operational (MetOp) satellites, launched in 2006, 2012, and 2018, as part of the European Organisation for the Exploitation of Meteorological Satellites (EUMETSAT) Polar System programme. The continuity of the scatterometer sensor is ensured until the mid-2040s through the MetOp Second Generation Programme. Therefore, by applying the SM2RAIN algorithm to ASCAT soil moisture observations, a long-term rainfall data record will be obtained, starting in 2007 and lasting until the mid-2040s. The paper describes the recent improvements in data pre-processing, SM2RAIN algorithm formulation, and data post-processing for obtaining the SM2RAIN–ASCAT quasi-global (only over land) daily rainfall data record at a 12.5 km spatial sampling from 2007 to 2018. The quality of the SM2RAIN–ASCAT data record is assessed on a regional scale through comparison with high-quality ground networks in Europe, the United States, India, and Australia. Moreover, an assessment on a global scale is provided by using the triple-collocation (TC) technique allowing us also to compare these data with the latest, fifth-generation European Centre for Medium-Range Weather Forecasts (ECMWF) reanalysis (ERA5), the Early Run version of the Integrated Multi-Satellite Retrievals for Global Precipitation Measurement (IMERG), and the gauge-based Global Precipitation Climatology Centre (GPCC) products. Results show that the SM2RAIN–ASCAT rainfall data record performs relatively well at both a regional and global scale, mainly in terms of root mean square error (RMSE) when compared to other products. Specifically, the SM2RAIN–ASCAT data record provides performance better than IMERG and GPCC in data-scarce regions of the world, such as Africa and South America. In these areas, we expect larger benefits in using SM2RAIN–ASCAT for hydrological and agricultural applications. The limitations of the SM2RAIN–ASCAT data record consist of the underestimation of peak rainfall events and the presence of spurious rainfall events due to high-frequency soil moisture fluctuations that might be corrected in the future with more advanced bias correction techniques. The SM2RAIN–ASCAT data record is freely available at 10.5281/zenodo.3405563 (Brocca et al., 2019) (recently extended to the end of August 2019). [ABSTRACT FROM AUTHOR]

The Mediterranean region has been identified as one of the main climate change hotspots: its sensitivity to global change is high and its evolution remains uncertain. The region experiences many interactions and feedbacks at the oceanic, atmospheric, and hydrological levels, while facing high anthropogenic activities. Analysing the water cycle over the Mediterranean region is of major importance to environmental and socio-economic aspects. The satellite monitoring of the Mediterranean water cycle represents one of the key challenges for the hydrological community.The presentation will show recent results on using satellite soil moisture and precipitation products for hydrometeorological prediction in the Mediterranean region, and particularly for the prediction of floods and landslides. Specifically, we will show the comparison of multiple satellite precipitation products for predicting flood in 100+ basins over the Mediterranean Basin by also using different hydrological models. Moreover, the assessment of satellite precipitation products for predicting the occurrence of landslides in Italy is carried out. Among the investigated satellite products, we have firstly considered state-of-the-art products such as TMPA (TRMM Multisatellite Precipitation Analysis), GPM (Global Precipitation Measurement), and H SAF (EUMETSAT Satellite Application Facility on Support to Operational Hydrology and Water Management). Secondly, we have tested the innovative products using the SM2RAIN algorithm for rainfall retrieval from multiple satellite soil moisture products including ASCAT (Advanced SCATterometer), SMOS (Soil Moisture and Ocean Salinity mission) and SMAP (Soil Moisture Active and Passive mission). [ABSTRACT FROM AUTHOR]

• A Bayesian approach has been used for merging multiple satellite rainfall products. • We created a superior product that can be efficiently run in near-real time. • Soil moisture can provide useful information for improving satellite rainfall. This work investigates the potential of using the Bayesian-based Model Conditional Processor (MCP) for complementing satellite precipitation products with a rainfall dataset derived from satellite soil moisture observations. MCP – which is a Bayesian Inversion approach – was originally developed for predictive uncertainty estimates of water level and discharge to support real-time flood forecasting. It is applied here for the first time to precipitation to provide its probability distribution conditional on multiple satellite precipitation estimates derived from TRMM Multi-Satellite Precipitation Analysis real-time product v.7.0 (3B42RT) and the soil moisture-based rainfall product SM2RAIN-CCI. In MCP, 3B42RT and SM2RAIN-CCI represent a priori information (predictors) about the "true" precipitation (predictand) and are used to provide its real-time a posteriori probabilistic estimate by means of the Bayes theorem. MCP is tested across Italy during a 6-year period (2010–2015) at daily/0.25 deg temporal/spatial scale. Results demonstrate that the proposed methodology provides rainfall estimates that are superior to both 3B42RT (as well as its successor IMERG-early run) and SM2RAIN-CCI in terms of both median bias, random errors and categorical scores. The study confirms that satellite soil moisture-derived rainfall can provide valuable information for improving state-of-the-art satellite precipitation products, thus making them more attractive for water resource management and large scale flood forecasting applications. [ABSTRACT FROM AUTHOR]

Long-term gridded precipitation products are crucial for several applications in hydrology, agriculture and climate sciences. Currently available precipitation products obtained from rain gauges, remote sensing and meteorological modelling suffer from space and time inconsistency due to non-uniform density of ground networks and the difficulties in merging multiple satellite sensors. The recent "bottom up" approach that uses satellite soil moisture observations for estimating rainfall through the SM2RAIN algorithm is suited to build long-term and consistent rainfall data record as a single polar orbiting satellite sensor is used. We exploit here the Advanced SCATterometer (ASCAT) on board three Metop satellites, launched in 2006, 2012 and 2018. The continuity of the scatterometer sensor on European operational weather satellites is ensured until mid-2040s through the Metop Second Generation Programme. By applying SM2RAIN algorithm to ASCAT soil moisture observations a long-term rainfall data record can be obtained, also operationally available in near real time. The paper describes the recent improvements in data pre-processing, SM2RAIN algorithm formulation, and data post-processing for obtaining the SM2RAIN-ASCAT global daily rainfall dataset at 12.5 km sampling (2007–2018). The quality of SM2RAIN-ASCAT dataset is assessed on a regional scale through the comparison with high-quality ground networks in Europe, United States, India and Australia. Moreover, an assessment on a global scale is provided by using the Triple Collocation technique allowing us also the comparison with other global products such as the latest European Centre for Medium-Range Weather Forecasts reanalysis (ERA5), the Global Precipitation Measurement (GPM) mission, and the gauge-based Global Precipitation Climatology Centre (GPCC) product. Results show that the SM2RAIN-ASCAT rainfall dataset performs relatively well both at regional and global scale, mainly in terms of root mean square error when compared to other datasets. Specifically, SM2RAIN-ASCAT dataset provides better performance better than GPM and GPCC in the data scarce regions of the world, such as Africa and South America. In these areas we expect the larger benefits in using SM2RAIN-ASCAT for hydrological and agricultural applications. [ABSTRACT FROM AUTHOR]

Highlights • DfD model is proposed to estimate drainage from soil moisture (SM) drydowns. • Soil hydraulic properties are encoded in the shape of SM recession scatter plot. • The model best operate in permeable soil and humid climate. • By using SM2RAIN and DfD jointly, rainfall is estimated from SM data only. • There is a good potential of applying DfD to satellite soil moisture data. Abstract The large heterogeneity in soil surface conditions makes it impracticable to obtain reliable estimates of soil hydraulic parameters for areas larger than few squared kilometers. However, identifying these parameters on a global scale is essential for many hydrological and climatic applications. In this study, a new approach named Drainage from Drydown (DfD) is proposed to estimate the coefficients of drainage using soil moisture observations. DfD firstly selects multiple drydown events when surface runoff and evapotranspiration rates are negligible compared to the drainage rate. Secondly, by inverting the soil water balance equation, the drainage coefficients are obtained. Synthetic experiments are carried out in order to tune the overall procedure. DfD is then tested with in situ observations at 8 different sites worldwide characterized by different climates and soil types. The reliability of the DfD is evaluated by using the DfD drainage coefficients in a physically based soil water balance model (SWB) for simulating soil moisture and a rainfall estimation model (SM2RAIN). The results indicate that the climate and the soil conditions exert an important role in the occurrence and magnitude of drainage rate. DfD is found capable of correctly identify periods in which drainage rate is the dominant process. Drainage coefficients obtained from DfD are consistent with the expected soil hydraulic properties based on the soil texture and land cover at each site. By using DfD drainage coefficients to estimate rainfall and soil moisture via SM2RAIN and SWB, promising results are obtained with median correlation of 0.83 and 0.91 between estimated and in situ data. However, in sites characterized by high rate of evapotranspiration (>700 mm/year) and low permeable soil (e.g., clay) the DfD performance is reduced. Overall, DfD demonstrates the ability to decouple drainage and evapotranspiration processes and to estimate the drainage coefficients from in situ observations. [ABSTRACT FROM AUTHOR]

As a natural feature of the Earth's weather system, rainfall is the main driver of the hydrological cycle. Rainfall plays an essential role in many applications including climate monitoring, extreme weather prediction and weather forecasting. On a global scale, ground-monitoring networks do not provide sufficient coverage and satellite rainfall products are often the only source of rainfall that guarantee a continuous temporal coverage. However, the indirect and the instantaneous nature of the measurement makes satellite rainfall products prone to errors (Kucera et al., 2013). Thanks to the strong connection between soil moisture and precipitation, capable to track accumulated precipitation estimates (rather than instantaneous), soil moisture can be successfully used to enhance the quality of satellite rainfall observations (Crow et al., 2011; Pellarin et al., 2013; Brocca et al. 2014). The SMOS+rainfall project of the European Space Agency (ESA), started in 2015 and concluded in 2017, has demonstrated the capability of the SMOS soil moisture product to enhance satellite rainfall information over land and has raised many interesting research questions related to the potential improvement that can be obtained by a combination of different soil moisture sensors. Here, we propose the use of a new near real time purely observational rainfall dataset derived from the combination of the Integrated Multi-Satellite Retrievals for GPM (IMERG early run) with multiple satellite rainfall products obtained from the inversion of the soil moisture retrievals derived from: 1) the Soil Moisture Active and Passive (SMAP) mission, 2) the Advanced Scatterometer (ASCAT) and 3) the Soil Moisture and Ocean Salinity (SMOS) mission via SM2RAIN (Brocca et al. 2014).The weighting method (Hobeichi et al. 2018) is based on a technique that provides an analytically optimal linear combination of rainfall products and accounts for both the performance differences and error covariance between the participating products. We examine the performance of the weighting approach in India, United States, Australia and Europe showing that the simultaneous use of soil moisture products is able to increase the quality of IMERG early run product and its performance for hydrological applications.Brocca et al., 2014. Soil as a natural rain gauge: estimating global rainfall from satellite soil moisture data. J. Geophy. Res. 119 (9), 5128–5141.Crow et al., 2011. Correcting rainfall using satellite-based surface soil moisture retrievals: the soil moisture analysis rainfall tool (SMART). Water Resour. Res. 47, W08521.Kucera et al. 2013. Precipitation from space: advancing earth system science. Bull. Am. Meteorol. Soc. 94, 365–375.Pellarin et al. 2013. A simple and effective method for correcting soil moisture and precipitation estimates using AMSR-E measurements. Remote Sens. Environ. 136, 28–36.Hobeichi et al. 2018. Derived Optimal Linear Combination Evapotranspiration (DOLCE): a global gridded synthesis ET estimate, Hydrol. Earth Syst. Sci., 22, 1317-1336. [ABSTRACT FROM AUTHOR]

Two new 1km soil moisture (SM) products based on Sentinel-1 CSAR and Metop ASCAT radar observations expand the portfolio of geophysical variables of the Copernicus Global Land Service (CGLS). The CGLS provides freely accessible a large number of harmonised and co-formatted data products on energy, water and vegetation variables in Near-Real-Time (NRT). Complementing the already operational 0.1° Metop-ASCAT Soil Water Index Version3 (SWIV3), the Surface Soil Moisture (SSM) from Sentinel-1 SAR data (named SSM1km) and a SWI product based on fused SSM data from ASCAT and Sentinel-1 observations (named SWI1km) enable continental and global monitoring of SM at a 1km sampling. They feature SM dynamics with much higher detail, allowing the analysis of local hydrological patterns, such as impacts from convectional rains and irrigation activities, and thus meet the requirements of users in many fields.The SSM1km gives in percent the relative soil moisture saturation of the upmost 5 cm, every 1.5-4 days over Europe, and globally every 3-6 days. The employed algorithm processes the CSAR observations at the initial 20m scale, at which a per-pixel signal analysis drives the algorithm parameter retrieval. Subsequent resampling of pre-processed SAR data to 1km suppresses artefacts stemming from the complex radar interactions at the 20m scale, and increases the sensitivity to soil moisture dynamics.The SWI1km gives in percent the relative water content in 8 layers of the soil's upmost metre, with a daily full coverage over operated areas. ASCAT and Sentinel-1 SSM are combined per pixel with the aid of data fusion parameters. These are based on the full combined archive of Sentinel-1 and ASCAT (2015-2018) and account for the signals' differences in scaling, accuracy and spatial representativeness. Through combination of both, the high temporal resolution of ASCAT-SSM and the high spatial resolution of Sentinel-1- SSM, it is the first pre-operational dataset that allows resolving SM dynamics with a daily frequency and a 1km sampling.We present results from the first released dataset from the SSM1km and SWI1km products, covering Europe over the period 2015-2018. We compare them against in-situ measurements, reference data from ASCAT SSM, 1km SM model data, and rainfall observations. Initial experiments on data over Italy found already comprehensively high agreement of the SWI1km with all reference datasets. While the Sentinel-1 signal appears to be attenuated, the ASCAT's signal dynamics are fully transferred to the SWI1km and benefit from the Sentinel-1 parametrisation. Moreover, the SWI1km shows excellent capability to reproduce rainfall observations. The SSM1km yields a consistent set of model parameters and product masks, unperturbed by Sentinel-1 coverage discontinuities. The SSM1km shows high agreement over plains and agricultural areas and low agreement over strong topography and forests, owing to wrongly attributed vegetation dynamics. While positive biases during the growing season are detected, excellent capability to capture small-scale soil moisture changes as such from convectional rainfall or irrigation are evident, which are often missed by remotely sensed coarse-scale soil moisture products.The SSM1km and SWI1km NRT-products are currently covering Europe from 2015 ongoing and are in preparation for dissemination with global coverage. [ABSTRACT FROM AUTHOR]

Rainfall is the primary input for hydrologic models that simulate the rainfall-runoff processes at basin scale. Because rainfall is highly variable in space and time, accurate hydrological simulations require accurate rainfall data at the best possible resolution. The conventional rain gauge observations in many parts of the world are sparse and unevenly distributed. Satellite-based rainfall products (SRPs) could be an alternative to traditional rain gauge observations and nowadays are available on a global scale at ever increasing spatial and temporal resolution.This study proposes a comprehensive assessment of SRPs for flood modeling in Europe. For this purpose, multiple SRPs (i.e., the Tropical Rainfall Measurement Mission (TRMM) Multi-satellite Precipitation Analysis TMPA; the Climate Prediction Center (CPC) Morphing algorithm, CMORPH, the Precipitation Estimation from Remotely Sensed Information using Artificial Neural Networks, PERSIANN; the SM2RAIN‐ASCAT rainfall product obtained from ASCAT satellite soil moisture through the SM2RAIN algorithm) will be used to force different lumped hydrologic models (e.g., MISDc, GR4J, HYMOD) over several (+900) basins throughout Europe with different sizes and physiographic characteristics. In particular, this study will allow to: 1) assess the quality of different SRPs for flood modelling and its relationship with climatic/geomorphological conditions; 2) explore the connection between the accuracy of SRPs and their performance in terms of flood modeling taking into account the rainfall-runoff model structure as well. Preliminary results indicated that: 1) satellite rainfall products are not completely reliable for flood forecasting; 2) the hydrological performances of satellite rainfall products depend both on the product and on the selected hydrological model making general guidelines for the optimal use of SRPs in flood modeling difficult to be drawn. To overcome this issue a multimodel-multiproduct approach would help to exploit relative skills of each satellite product-hydrological model configuration and would bring to a more reliable flood forecasting system. [ABSTRACT FROM AUTHOR]

Crop simulation models, which are mainly being utilized as tools to assess the consequences of a changing climate and different management strategies on crop production at the field scale, are increasingly being used in a distributed model at the regional scale. Spatial data analysis and modelling in combination with geographic information systems (GIS) integrates information from soil, climate, and topography data into a larger area, providing a basis for spatial and temporal analysis. In the current study, the crop growth model Decision Support System for Agrotechnology Transfer (DSSAT) was used to evaluate five gridded precipitation input data at three locations in Austria. The precipitation data sets consist of the INtegrated Calibration and Application Tool (INCA) from the Meteorological Service Austria, two satellite precipitation data sources—Multisatellite Precipitation Analysis (TMPA) and Climate Prediction Center MORPHing (CMORPH)—and two rainfall estimates based on satellite soil moisture data. The latter were obtained through the application of the SM2RAIN algorithm (SM2RASC) and a regression analysis (RAASC) applied to the Metop-A/B Advanced SCATtermonter (ASCAT) soil moisture product during a 9-year period from 2007–2015. For the evaluation, the effect on winter wheat and spring barley yield, caused by different precipitation inputs, at a spatial resolution of around 25 km was used. The highest variance was obtained for the driest area with light-textured soils; TMPA and two soil moisture-based products show very good results in the more humid areas. The poorest performances at all three locations and for both crops were found with the CMORPH input data. [ABSTRACT FROM AUTHOR]

Soil moisture is a key environmental variable, important to e.g., farmers, meteorologists, and disaster management units. We fuse surface soil moisture (SSM) estimates from spatio-temporally complementary radar sensors through temporal filtering of their joint signal and obtain a kilometre-scale, daily soil water content product named SCATSAR-SWI. With 25 km Metop ASCAT SSM and 1 km Sentinel-1 SSM serving as input, the SCATSAR-SWI is globally applicable and achieves daily full coverage over operated areas. We employ a near-real-time-capable SCATSAR-SWI algorithm on a fused 3 year ASCAT-Sentinel-1-SSM data cube over Italy, obtaining a consistent set of model parameters, unperturbed by coverage discontinuities. An evaluation of a therefrom generated SCATSAR-SWI dataset, involving a 1 km Soil Water Balance Model (SWBM) over Umbria, yields comprehensively high agreement with the reference data (median R = 0.61 vs. in situ; 0.71 vs. model; 0.83 vs. ASCAT SSM). While the Sentinel-1 signal is attenuated to some extent, the ASCAT's signal dynamics are fully transferred to the SCATSAR-SWI and benefit from the Sentinel-1 parametrisation. Using the SM2RAIN approach, the SCATSAR-SWI shows excellent capability to reproduce 5 day-accumulated rainfall over Italy, with R = 0.89 against observed rainfall. The SCATSAR-SWI is currently in preparation towards operational product dissemination in the Copernicus Global Land Service (CGLS). [ABSTRACT FROM AUTHOR]