Search

ADP-ribosylation is a post-translational modification involved in regulation of diverse cellular pathways. Interestingly, many pathogens have been identified to utilize ADP-ribosylation as a way for host manipulation. A recent study found that CteC, an effector from the bacterial pathogen Chromobacterium violaceum, hinders host ubiquitin (Ub) signaling pathways via installing mono-ADP-ribosylation on threonine 66 of Ub. However, the molecular basis of substrate recognition by CteC is not well understood. In this article, we probed the substrate specificity of this effector at protein and residue levels. We also determined the crystal structure of CteC in complex with NAD + , which revealed a canonical mono-ADP-ribosyltransferase fold with an additional insertion domain. The AlphaFold-predicted model differed significantly from the experimentally determined structure, even in regions not used in crystal packing. Biochemical and biophysical studies indicated unique features of the NAD + binding pocket, while showing selectivity distinction between Ub and structurally close Ub-like modifiers and the role of the insertion domain in substrate recognition. Together, this study provides insights into the enzymatic specificities and the key structural features of a novel bacterial ADP-ribosyltransferase involved in host-pathogen interaction., Competing Interests: Conflict of interest The authors declare that they have no conflicts of interest with the contents of this article., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Transaminases have shown the ability to catalyze the amination of a series of aliphatic and (hetero)aromatic α,α-difluorinated ketones with high stereoselectivity, thus providing the corresponding β,β-difluoroamines in high isolated yields (55-82%) and excellent enantiomeric excess (>99%). It was also observed that these activated substrates could be quantitatively transformed by employing a small molar excess of the amine donor since this amination process was thermodynamically favored. Selected transformations could be scaled up to 500 mg, showing the robustness of this methodology.

Background: Violaceins have attracted much attention as potential targets used in medicines, food additives, insecticides, cosmetics and textiles, but low productivity was the key factor to limit their large-scale applications. This work put forward a direct RBS engineering strategy to engineer the violacein biosynthetic gene cluster cloned from Chromobacterium violaceum ATCC 12,472 to efficiently improve the fermentation titers., Results: Through four-rounds of engineering of the native RBSs within the violaceins biosynthetic operon vioABCDE, this work apparently broke through the rate-limiting steps of intermediates conversion, resulting in 2.41-fold improvement of violaceins production compared to the titers of the starting strain Escherichia coli BL21(DE3) (Vio12472). Furthermore, by optimizing the batch-fermentation parameters including temperature, concentration of IPTG inducer and fermentation time, the maximum yield of violaceins from (BCDE)m (tnaA - ) reached 3269.7 µM at 2 mM tryptophan in the medium. Interestingly, rather than previous reported low temperature (20 ℃), we for the first time found the RBS engineered Escherichia coli strain (BCDE)m worked better at higher temperature (30 ℃ and 37 ℃), leading to a higher-level production of violaceins., Conclusions: To our knowledge, this is the first time that a direct RBS engineering strategy is used for the biosynthesis of natural products, having the potential for a greater improvement of the product yields within tryptophan hyperproducers and simultaneously avoiding the costly low temperature cultivation for large-scale industrial production of violaciens. This direct RBS engineering strategy could also be easily and helpfully used in engineering the native RBSs of other larger and value-added natural product biosynthetic gene clusters by widely used site-specific mutagenesis methods represented by inverse PCR or CRISPR-Cas9 techniques to increase their fermentation titers in the future.

Stereoselectivity, a distinctive characteristic of lipase (EC 3.1.1.3), refers to the ability to differentiate between enantiomeric positions ( sn -1 and sn -3) in triacylglycerol (TAG). This property has been determined based on the time course of enantiomeric excess of diacylglycerol (DAG) considering several consecutive steps of lipase-catalyzed hydrolysis of TAG; however, this concept is insufficient to represent the true nature of lipases which are capable of hydrolyzing the sn -2 position of TAG under the condition acyl migration occurs. Here, we suggest "integral stereoselectivity" to capture the preference of lipases for all ester groups of both TAG and DAG, as a novel index of the stereochemistry of lipase. To determine integral stereoselectivity, we established an analytical system based on the chromatographic resolution of dioleoylglycerol (DO) enantiomers and regioisomers. DO enantiomers were derivatized with 4-nitrophenyl isocyanate, and subsequently, resolved by chiral-phase high-performance liquid chromatography-ultraviolet. Regioisomers of monooleoylglycerol and DO were analyzed by HPLC with an evaporative light-scattering detector. Time-course analysis of three model lipases involved in the hydrolysis of trioleoylglycerol validated the analytical system designed to determine the integral stereoselectivity. As an accurate indicator of lipase stereochemistry reflecting all hydrolysis steps, integral stereoselectivity can expedite the development of lipases with unique stereochemistry from agricultural sources and their application to the food industry.

A chitosanase (CvCsn46) from Chromobacterium violaceum ATCC 12472 was produced in Escherichia coli, purified, and partially characterized. When subjected to denaturing polyacrylamide gel electrophoresis, the enzyme migrated as two protein bands (38 and 36 kDa apparent molecular masses), which were both identified as CvCsn46 by mass spectrometry. The enzyme hydrolyzed colloidal chitosan, with optimum catalytic activity at 50 °C, and two optimum pH values (at pH 6.0 and pH 11.0). The chitosanolytic activity of CvCsn46 was enhanced by some ions (Ca 2+ , Co 2+ , Cu 2+ , Sr 2+ , Mn 2+ ) and DTT, whereas Fe 2+ , SDS and β-mercaptoethanol completely inhibited its activity. CvCsn46 showed a non-Michaelis-Menten kinetics, characterized by a sigmoidal velocity curve (R 2  = 0.9927) and a Hill coefficient of 3.95. ESI-MS analysis revealed that the hydrolytic action of CvCsn46 on colloidal chitosan generated a mixture of low molecular mass chitooligosaccharides, containing from 2 to 7 hexose residues, as well as D-glucosamine. The chitosan oligomers generated by CvCsn46 inhibited in vitro the mycelial growth of Lasiodiplodia theobromae, significantly reducing mycelium extension and inducing hyphal morphological alterations, as observed by scanning electron microscopy. CvCsn46 was characterized as a versatile biocatalyst that produces well-defined chitooligosaccharides, which have potential to control fungi that cause important crop diseases., Competing Interests: Declaration of competing interest The authors declare that they have no conflict of interest., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Whole cell biocatalysis is an ideal tool for biotransformations that demand enzyme regeneration or robustness to fluctuating pH, osmolarity and biocontaminant load in feedstocks. The methylotrophic yeast Komagataella phaffii is an attractive alternative to Escherichia coli for whole cell biocatalysis due to its genetic tractability and capacity to grow to up to 60% wet cell weight by volume. We sought to exploit high cell density K. phaffii to intensify whole-cell chiral amino-alcohol (CAA) biosynthesis. We engineered two novel K. phaffii GS115 strains: one by inserting a Chromobacterium violaceum ω-transaminase CV2025 transgene, for strain PpTAmCV708, and a second strain, PpTAm-TK16, by also inserting the same CV2025 transgene plus a second transgene for a native transketolase. At high cell density, both strains tolerated high substrate concentrations. When fed three low cost substrates, 200 mM glycolaldehyde, 200 mM hydroxypyruvate and 150 mM methylbenzylamine, PpTAm-TK16 whole cells achieved 0.29 g L -1 hr -1 space-time yield of the acetophenone by-product, a 49-fold increase of the highest levels reported for E. coli whole cells harboring the equivalent pathway. When fed only the low-cost substrate, 150 mM methylbenzylamine, strain PpTAmCV708 achieved a 105-fold increase of reported E. coli whole cell biocatalysis performance, with a space-time yield of 0.62 g L -1 hr -1 of the CAA, 2-amino-1,3,4-butanetriol (ABT). The rapid growth and high biomass characteristics of K. phaffii were successfully exploited for production of ABT by whole-cell biocatalysis at higher levels than the previously achieved with E. coli in the presence of the same substrates., (© 2019 American Institute of Chemical Engineers.)

Azoreductase from Chromobacterium violaceum was characterized biophysically using experimental and computational tools. The in-silico docking and cross-linking experiments using glutaraldehyde suggest dimeric nature of the enzyme. The enzyme structure was modelled and also studied using circular dichroism (CD) spectroscopy which suggests 40% α- helix, 30% β- sheet and 30% random coils. In the modelled structure of the azoreductase, the cofactor flavin mononucleotide (FMN) binding energy was -3.8 kJ/mol. The binding of FMN affects the azoreductase-cofactor complex stability. The stability-folding studies indicate that the cofactor, FMN is required for folding, stability and activity. Overall, the data provides interesting insight into stability and biophysical parameters of the azoreductase protein., (Copyright © 2019 Elsevier Inc. All rights reserved.)

One of the main factors hampering the implementation in industry of transaminase-based processes for the synthesis of enantiopure amines is their often low storage and operational stability. Our still limited understanding of the inactivation processes undermining the stability of wild-type transaminases represents an obstacle to improving their stability through enzyme engineering. In this paper we present a model describing the inactivation process of the well-characterized (S)-selective amine transaminase from Chromobacterium violaceum. The cornerstone of the model, supported by structural, computational, mutagenesis and biophysical data, is the central role of the catalytic lysine as a conformational switch. Upon breakage of the lysine-PLP Schiff base, the strain associated with the catalytically active lysine conformation is dissipated in a slow relaxation process capable of triggering the known structural rearrangements occurring in the holo-to-apo transition and ultimately promoting dimer dissociation. Due to the occurrence in the literature of similar PLP-dependent inactivation models valid for other non-transaminase enzymes belonging to the same fold-class, the role of the catalytic lysine as conformational switch might extend beyond the transaminase enzyme group and offer new insight to drive future non-trivial engineering strategies.

Phenylalanine hydroxylase from Chromobacterium violaceum (CvPAH) is a monomeric enzyme that converts phenylalanine to tyrosine. It shares high amino acid identity and similar structure with a subunit of human phenylalanine hydroxylase that is a tetramer, resulting in the latent application in medications. In this study, semirational design was applied to CvPAH to improve the catalytic ability based on molecular dynamics simulation analyses. Four Nterminal truncated variants and one single point variant were constructed and characterized. The D267P variant showed a 2.1-fold increased thermal stability compared to the wild type, but lower specific activity was noted compared with the wild type. The specific activity of all truncated variants was a greater than 25% increase compared to the wild type, and these variants showed similar or slightly decreased thermostability with the exception of the N-Δ9 variant. Notably, the N-Δ9 variant exhibited a 1.2-fold increased specific activity, a 1.3-fold increased thermostability and considerably increased catalytic activity under the neutral environment compared with the wild type. These properties of the N-Δ9 variant could advance medical and pharmaceutical applications of CvPAH. Our findings indicate that the N-terminus might modulate substrate binding, and are directives for further modification and functional research of PAH and other enzymes.

LipMF3 is a new lipase isolated from a metagenomic library derived from a fat-contaminated soil. It belongs to the lipase subfamily I.1 and has identities of 68% and 67% with lipases of Chromobacterium violaceum and C. amazonense, respectively. Genes encoding LipMF3 and its cognate foldase, LifMF3, were cloned and co-expressed in Escherichia coli. The highest hydrolytic activity of purified Lip-LifMF3 was at 40 °C and pH 6.5. Under these conditions, the highest activity was against tributyrin (1650 U mg -1 ), but it also had high activity against olive oil (862 U mg -1 ). It was stable in hydrophilic organic solvents (25%, v/v in water) with residual activity around 100% after 24 h. It also showed stability over a wide pH range (5.5 to 11) with residual activity above 80% after 24 h. Lip-LifMF3 was immobilized by covalent bonding onto Immobead 150P and by adsorption onto Sepabeads FP-BU. The latter preparation gave the best results, producing 94% conversion after 5 h for the synthesis of ethyl oleate and a 90% enantiomeric excess of the product (R)‑1‑phenylethyl acetate for the kinetic resolution of (R,S)‑1‑phenyl‑1‑ethanol. The results obtained in this work provide a basis for the development of applications of Lip-LifMF3 in biocatalysis., (Copyright © 2019 Elsevier B.V. All rights reserved.)

The biocontrol activity of some soil strains of Chromobacterium sp. against pathogenic fungi has been attributed to secreted chitinases. The aim of this work was to characterize biochemically a recombinant chitinase (CvChi47) from C. violaceum ATCC 12472 and to investigate its effects on phytopathogenic fungi. CvChi47 is a modular enzyme with 450 amino acid residues, containing a type I signal peptide at the N-terminal region, followed by one catalytic domain belonging to family 18 of the glycoside hydrolases, and two type-3 chitin-binding domains at the C-terminal end. The recombinant enzyme was expressed in Escherichia coli as a His-tagged protein and purified to homogeneity. The native signal peptide of CvChi47 was used to direct its secretion into the culture medium, from where the recombinant product was purified by affinity chromatography on chitin and immobilized metal. The purified protein showed an apparent molecular mass of 46 kDa, as estimated by denaturing polyacrylamide gel electrophoresis, indicating the removal of the signal peptide. CvChi47 was a thermostable protein, retaining approximately 53.7% of its activity when heated at 100 °C for 1 h. The optimum hydrolytic activity was observed at 60 °C and pH 5. The recombinant chitinase inhibited the conidia germination of the phytopathogenic fungi Fusarium oxysporum and F. guttiforme, hence preventing mycelial growth. Furthermore, atomic force microscopy experiments revealed a pronounced morphological alteration of the cell surface of conidia incubated with CvChi47 in comparison to untreated cells. Taken together, these results show the potential of CvChi47 as a molecular tool to control plant diseases caused by these Fusarium species., (Copyright © 2019 Elsevier Inc. All rights reserved.)

Cholesterol oxidase is a bifunctional bacterial flavoenzyme which catalyzes oxidation and isomerization of cholesterol. This valuable enzyme has attracted a great deal of attention because of its wide application in the clinical laboratory, synthesis of steroid derived drugs, food industries, and its potentially insecticidal activity. Therefore, development of an efficient protocol for overproduction of cholesterol oxidase could be valuable and beneficial in this regard. The present study examined the role of various parameters (host strain, culture media, induction time, isopropyl ß-D-1-thiogalactopyranoside concentration, as well as post-induction incubation time and temperature) on over-expression of cholesterol oxidase from Chromobacterium sp. DS1. Applying the optimized protocol, the yield of recombinant cholesterol oxidase significantly increased from 92 U/L to 2115 U/L. Under the optimized conditions, the enzyme was produced on a large-scale, and overexpressed cholesterol oxidase was purified from cell lysate by column nickel affinity chromatography. Km and Vmax values of the purified enzyme for cholesterol were estimated using Lineweaver-Burk plot. Further, the optimum pH and optimum temperature for the enzyme activity were determined. This study reports a straightforward protocol for cholesterol oxidase production which can be performed in any laboratory., Competing Interests: The authors have declared that no competing interests exist.

In this study, two stereocomplementary ω-transaminases from Arthrobacter sp. (AsR-ωTA) and Chromobacterium violaceum (Cv-ωTA) were immobilized via iron cation affinity binding onto polymer-coated controlled porosity glass beads (EziG ™ ). The immobilization procedure was studied with different types of carrier materials and immobilization buffers of varying compositions, concentrations, pHs and cofactor (PLP) concentrations. Notably, concentrations of PLP above 0.1 mM were correlated with a dramatic decrease of the immobilization yield. The highest catalytic activity, along with quantitative immobilization, was obtained in MOPS buffer (100 mM, pH 8.0, PLP 0.1 mM, incubation time 2 h). Leaching of the immobilized enzyme was not observed within 3 days of incubation. EziG-immobilized AsR-ωTA and Cv-ωTA retained elevated activity when tested for the kinetic resolution of rac-α-methylbenzylamine (rac-α-MBA) in single batch experiments. Recycling studies demonstrated that immobilized EziG 3 -AsR-ωTA could be recycled for at least 16 consecutive cycles (15 min per cycle) and always affording quantitative conversion (TON ca. 14,400). Finally, the kinetic resolution of rac-α-MBA with EziG 3 -AsR-ωTA was tested in a continuous flow packed-bed reactor (157 μL reactor volume), which produced more than 5 g of (S)-α-MBA (>49% conversion, >99% ee) in 96 h with no detectable loss of catalytic activity. The calculated TON was more than 110,000 along with a space-time yield of 335 g L -1  h -1 ., (Copyright © 2019 The Authors. Published by Elsevier B.V. All rights reserved.)

Polyhydroxyalkanoates (PHAs) are biopolymers synthesized by a wide range of bacteria, which serve as a promising candidate in replacing some conventional petrochemical-based plastics. PHA synthase (PhaC) is the key enzyme in the polymerization of PHA, and the crystal structures were successfully determined using the catalytic domain of PhaC from Cupriavidus necator (PhaC Cn -CAT) and Chromobacterium sp. USM2 (PhaC Cs -CAT). Here, we review the beneficial mutations discovered in PhaCs from a structural perspective. The structural comparison of the residues involved in beneficial mutation reveals that the residues are near to the catalytic triad, but not inside the catalytic pocket. For instance, Ala510 of PhaC Cn is near catalytic His508 and may be involved in the open-close regulation, which presumably play an important role in substrate specificity and activity. In the class II PhaC1 from Pseudomonas sp. 61-3 (PhaC1 Ps ), Ser325 stabilizes the catalytic cysteine through hydrogen bonding. Another residue, Gln508 of PhaC1 Ps is located in a conserved hydrophobic pocket which is next to the catalytic Asp and His. A class I, II-conserved Phe420 of PhaC Cn is one of the residues involved in dimerization and its mutation to serine greatly reduced the lag phase. The current structural analysis shows that the Phe362 and Phe518 of PhaC from Aeromonas caviae (PhaC Ac ) are assisting the dimer formation and maintaining the integrity of the core beta-sheet, respectively. The structure-function relationship of PhaCs discussed in this review will serve as valuable reference for future protein engineering works to enhance the performance of PhaCs and to produce novel biopolymers.

The presence of dye, including azo functional group (NN) containing dyes, in industrial waste water is one of the major causes of water pollution. This report showcases the functional role of azoreductase from Chromobacterium violaceum (MTCC No: 2656) as a valuable enzyme for degradation of azo dyes. The enzyme was cloned, expressed, purified and biochemically characterized and further tested for degradation efficiency of azo group containing dyes like methyl red, amaranth and methyl orange. The degraded azo dye products (metabolites) resulted by the action of azoreductase enzyme had reduced toxicity on fibroblast cell lines (L929) as compared to raw and intact dye. Further, good stability of the enzyme makes it more suitable for various applications related to the degradation and decolourisation of effluent dyes., (Copyright © 2018 Elsevier B.V. All rights reserved.)

In the era of increased antibiotic resistance, targeting enzymes involved in bacterial communication (quorum sensing) represents a new strategy to fight bacterial infections. LsrK is a kinase responsible for the phosphorylation of autoinducer-2, a signaling molecule involved in quorum sensing. Inhibiting LsrK would lead to quorum sensing inactivation and interfere with the pathogenesis. In this study, we built the first LsrK 3D model and performed virtual screening of a locally available database. Selected compounds were tested against LsrK, and the analogue search conducted based on the positive hits led to the identification of low-micromolar LsrK inhibitors. These results prove the utility of the model and provide the first class of LsrK inhibitors to be further optimized as antivirulence agents., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

l-Tryptophan oxidase, VioA from Chromobacterium violaceum, which has a high substrate specificity for tryptophan, is useful for quantitative assay of tryptophan. However, stability of wild type VioA is not enough for its application in clinical or industrial use. To improve the thermal stability of the enzyme, we developed a VioA (C395A) mutant, with higher stability than wild type VioA. The VioA (C395A) exhibited similar specificity and kinetic parameter for tryptophan to wild type. Conventionally, the quantity of tryptophan is determined by instrumental methods, such as high-performance liquid chromatography (HPLC) after pre-column-derivatization. Using the mutant enzyme, we succeeded in the tryptophan quantification in human plasma samples, to an accuracy of <2.9% when compared to the instrumental method, and to a precision of CV <3.2%. To analyse the improvement in storage stability and substrate specificity, we further determined the crystal structures of VioA (C395A) complexed with FAD, and with FAD and tryptophan at 1.8 Å resolution.

An improved sol-gel process involving the use of hollow silica microspheres as a supporting additive was applied for the co-immobilization of whole cells of Escherichia coli with Chromobacterium violaceum ω-transaminase activity and Lodderomyces elongisporus with ketoreductase activity. The co-immobilized cells with two different biocatalytic activities could perform a cascade of reactions to convert racemic 4-phenylbutan-2-amine or heptan-2-amine into a nearly equimolar mixture of the corresponding enantiomerically pure R amine and S alcohol even in continuous-flow mode. The novel co-immobilized whole-cell system proved to be an easy-to-store and durable biocatalyst., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Dengue virus (DENV) is the most prevalent and burdensome arbovirus transmitted by Aedes mosquitoes, against which there is only a limited licensed vaccine and no approved drug treatment. A Chromobacterium species, C. sp. Panama, isolated from the midgut of A. aegypti is able to inhibit DENV replication within the mosquito and in vitro. Here we show that C. sp. Panama mediates its anti-DENV activity through secreted factors that are proteinous in nature. The inhibitory effect occurs prior to virus attachment to cells, and is attributed to a factor that destabilizes the virion by promoting the degradation of the viral envelope protein. Bioassay-guided fractionation, coupled with mass spectrometry, allowed for the identification of a C. sp. Panama-secreted neutral protease and an aminopeptidase that are co-expressed and appear to act synergistically to degrade the viral envelope (E) protein and thus prevent viral attachment and subsequent infection of cells. This is the first study characterizing the anti-DENV activity of a common soil and mosquito-associated bacterium, thereby contributing towards understanding how such bacteria may limit disease transmission, and providing new tools for dengue prevention and therapeutics.

Terminal modification of peptides is frequently used to improve their hydrophobicity. While N-terminal modification with fatty acids (lipidation) has been reported previously, C-terminal lipidation is limited as it requires the use of linkers. Here we report the use of a biocatalyst for the production of an unnatural fatty amino acid, (S)-2-aminooctanoic acid (2-AOA) with enantiomeric excess > 98% ee and the subsequent use of 2-AOA to modify and improve the activity of an antimicrobial peptide. A transaminase originating from Chromobacterium violaceum was employed with a conversion efficiency 52-80% depending on the ratio of amino group donor to acceptor. 2-AOA is a fatty acid with amino functionality, which allowed direct C- and N-terminal conjugation respectively to an antimicrobial peptide (AMP) derived from lactoferricin B. The antibacterial activity of the modified peptides was improved by up to 16-fold. Furthermore, minimal inhibitory concentrations (MIC) of C-terminally modified peptide were always lower than N-terminally conjugated peptides. The C-terminally modified peptide exhibited MIC values of 25 μg/ml for Escherichia coli, 50 μg/ml for Bacillus subtilis, 100 μg/ml for Salmonella typhimurium, 200 μg/ml for Pseudomonas aeruginosa and 400 μg/ml for Staphylococcus aureus. The C-terminally modified peptide was the only peptide tested that showed complete inhibition of growth of S. aureus.

Chemoenzymatic and enzymatic cascade reactions enable the synthesis of complex stereocomplementary 1,3,4-trisubstituted tetrahydroisoquinolines (THIQs) with three chiral centers in a step-efficient and selective manner without intermediate purification. The cascade employs inexpensive substrates (3-hydroxybenzaldehyde and pyruvate), and involves a carboligation step, a subsequent transamination, and finally a Pictet-Spengler reaction with a carbonyl cosubstrate. Appropriate selection of the carboligase and transaminase enzymes enabled the biocatalytic formation of (1R,2S)-metaraminol. Subsequent cyclization catalyzed either enzymatically by a norcoclaurine synthase or chemically by phosphate resulted in opposite stereoselectivities in the products at the C1 position, thus providing access to both orientations of the THIQ C1 substituent. This highlights the importance of selecting from both chemo- and biocatalysts for optimal results., (© 2017 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.)

We investigated a novel, simple method for activating lipases in non-aqueous reaction media. Lipase powders were suspended in n-fatty alcohols and were then hydrated by adding a small amount of water. A paste-like aggregate was recovered from the mixture followed by lyophilization for obtaining activated lipases as dry powders. Lipase activity was evaluated for esterification between myristic acid and methanol in n-hexane. The activated lipases exhibited high esterification activity depending on the experiment conditions during hydration-aggregation pretreatment such as the amount of added water, the temperature, the pH of added buffer solutions, and the carbon chain length of the n-fatty alcohols used as pretreatment solvents. Various commercial lipases from different origins could be activated by this method. Changes in lipase conformation induced by the hydration-aggregation pretreatment were studied based on fluorescence and Fourier-transform infrared spectroscopy., (Copyright © 2017 Elsevier Inc. All rights reserved.)

Polyhydroxyalkanoate (PHA) is a promising candidate for use as an alternative bioplastic to replace petroleum-based plastics. Our understanding of PHA synthase PhaC is poor due to the paucity of available three-dimensional structural information. Here we present a high-resolution crystal structure of the catalytic domain of PhaC from Chromobacterium sp. USM2, PhaC Cs -CAT. The structure shows that PhaC Cs -CAT forms an α/β hydrolase fold comprising α/β core and CAP subdomains. The active site containing Cys291, Asp447 and His477 is located at the bottom of the cavity, which is filled with water molecules and is covered by the partly disordered CAP subdomain. We designated our structure as the closed form, which is distinct from the recently reported catalytic domain from Cupriavidus necator (PhaC Cn -CAT). Structural comparison showed PhaC Cn -CAT adopting a partially open form maintaining a narrow substrate access channel to the active site, but no product egress. PhaC Cs -CAT forms a face-to-face dimer mediated by the CAP subdomains. This arrangement of the dimer is also distinct from that of the PhaC Cn -CAT dimer. These findings suggest that the CAP subdomain should undergo a conformational change during catalytic activity that involves rearrangement of the dimer to facilitate substrate entry and product formation and egress from the active site.

Cholesterol oxidase (COase) is a bacterial enzyme catalyzing the first step in the biodegradation of cholesterol. COase is an important biotechnological tool for clinical diagnostics and production of steroid drugs and insecticides. It is also used for tracking intracellular cholesterol; however, its utility is limited by the lack of an efficient temporal control of its activity. To overcome this we have developed a regulatable fragment complementation system for COase cloned from Chromobacterium sp. The enzyme was split into two moieties that were fused to FKBP (FK506-binding protein) and FRB (rapamycin-binding domain) pair and split GFP fragments. The addition of rapamycin reconstituted a fluorescent enzyme, termed split GFP-COase, the fluorescence level of which correlated with its oxidation activity. A rapid decrease of cellular cholesterol induced by intracellular expression of the split GFP-COase promoted the dissociation of a cholesterol biosensor D4H from the plasma membrane. The process was reversible as upon rapamycin removal, the split GFP-COase fluorescence was lost, and cellular cholesterol levels returned to normal. These data demonstrate that the split GFP-COase provides a novel tool to manipulate cholesterol in mammalian cells., (© 2017 by The American Society for Biochemistry and Molecular Biology, Inc.)

Background: Whole-cell biocatalysis based on metabolically active baker's yeast with engineered transamination activity can be used to generate molecules carrying a chiral amine moiety. A prerequisite is though to express efficient ω-transaminases and to reach sufficient intracellular precursor levels., Results: Herein, the efficiency of three different ω-transaminases originating from Capsicum chinense, Chromobacterium violaceum, and Ochrobactrum anthropi was compared for whole-cell catalyzed kinetic resolution of racemic 1-phenylethylamine to (R)-1-phenylethylamine. The gene from the most promising candidate, C. violaceum ω-transaminase (CV-TA), was expressed in a strain lacking pyruvate decarboxylase activity, which thereby accumulate the co-substrate pyruvate during glucose assimilation. However, the conversion increased only slightly under the applied reaction conditions. In parallel, the effect of increasing the intracellular pyridoxal-5'-phosphate (PLP) level by omission of thiamine during cultivation was investigated. It was found that without thiamine, PLP supplementation was redundant to keep high in vivo transamination activity. Furthermore, higher reaction rates were achieved using a strain containing several copies of CV-TA gene, highlighting the necessity to also increase the intracellular transaminase level. At last, this strain was also investigated for asymmetric whole-cell bioconversion of acetophenone to (S)-1-phenylethylamine using L-alanine as amine donor. Although functionality could be demonstrated, the activity was extremely low indicating that the native co-product removal system was unable to drive the reaction towards the amine under the applied reaction conditions., Conclusions: Altogether, our results demonstrate that (R)-1-phenylethylamine with >99% ee can be obtained via kinetic resolution at concentrations above 25 mM racemic substrate with glucose as sole co-substrate when combining appropriate genetic and process engineering approaches. Furthermore, the engineered yeast strain with highest transaminase activity was also shown to be operational as whole-cell catalyst for the production of (S)-1-phenylethylamine via asymmetric transamination of acetophenone, albeit with very low conversion.

This chapter describes methods for enzyme stabilization using micellar solutions. Micellar solutions have been shown to increase the thermal stability, as well as the pH and solvent tolerance of enzymes. This field is traditionally referred to as micellar enzymology. This chapter details the use of ionic and nonionic micelles for the stabilization of polyphenol oxidase, lipase, and catalase, although this method could be used with any enzymatic system or enzyme cascade system.

Chromobacterium sp. strain C61 has strong biocontrol activity; however, the genetic and biochemical determinants of its plant disease suppression activity are not well understood. Here, we report the identification and characterization of two new determinants of its biocontrol activity. Transposon mutagenesis was used to identify mutants that were deficient in fungal suppression. One of these mutants had an insertion in a homologue of depD, a structural gene in the dep operon, that encodes a protein involved in non-ribosomal peptide synthesis. In the second mutant, the insertion was in a homologue of the luxI gene, which encodes a homoserine lactone synthase. The luxI - and depD - mutants had no antifungal activity in vitro and a dramatically reduced capacity to suppress various plant diseases in planta. Antifungal production and biocontrol were restored by complementation of the luxI - mutant. Other phenotypes associated with effective biological control, including motility and lytic enzyme secretion, were also affected by the luxI mutation. Biochemical analysis of ethyl acetate extracts of culture filtrates of the mutant and wild-type strains showed that a key antifungal compound, chromobactomycin, was produced by wild-type C61 and the complemented luxI - mutant, but not by the luxI - or depD - mutant. These data suggest that multiple biocontrol-related phenotypes are regulated by homoserine lactones in C61. Thus, quorum sensing plays an essential role in the biological control potential of diverse bacterial lineages., (© 2016 BSPP and John Wiley & Sons Ltd.)

Aquitalea sp. USM4 (JCM 19919) was isolated from a freshwater sample at Lata Iskandar Waterfall in Perak, Malaysia. It is a rod-shaped, gram-negative bacterium with high sequence identity (99%) to Aquitalea magnusonii based on 16S rRNA gene analysis. Aquitalea sp. USM4 also possessed a PHA synthase gene (phaC), which had amino acid sequence identity of 77-78% to the PHA synthase of Chromobacterium violaceum ATCC12472 and Pseudogulbenkiania sp. NH8B. PHA biosynthesis results showed that wild-type Aquitalea sp. USM4 was able to accumulate up to 1.5 g/L of poly(3-hydroxybutyrate), [P(3HB)]. The heterologous expression of the PHA synthase gene of Aquitalea sp. USM4 (phaC Aq ) in Cupriavidus necator PHB - 4 had resulted in PHA accumulation up to 3.2 g/L of P(3HB). It was further confirmed by 1 H nuclear magnetic resonance (NMR) analysis that Aquitalea sp. USM4 and C. necator PHB - 4 transformant were able to produce PHA containing 3-hydroxyvalerate (3HV), 4-hydroxybutyrate (4HB) and 3-hydroxy-4-methylvalerate (3H4MV) monomers from suitable precursor substrates. Interestingly, relatively high PHA synthase activity of 863 U/g and 1402 U/g were determined in wild-type Aquitalea sp. USM4 and C. necator PHB - 4 transformant respectively. This is the first report on the member of genus Aquitalea as a new PHA producer as well as in vitro and in vivo characterization of a novel PHA synthase from Aquitalea sp. USM4., (Copyright © 2016 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.)

In proteins of thermophilic bacteria, Gly is tend to be replaced by Ala and Lys is tend to be replaced by Arg to adapt the high temperature. In order to improve the thermal stability of phenylalanine hydroxylase (PAH) from Chromobacterium violaceum, all the Gly on PAH were mutated to Ala and Lys to Arg. Positive mutant enzymes with improved thermal stability were selected, followed by combined mutation and characterization. The results revealed that half-lives of K94R and G221A mutants at 50 °C were 26.2 min and 16.8 min, which were increased by 1.9-times and 0.9-times than the parent enzyme (9.0 min). The residual activity of K94R/G221A mutant was improved to 65.6% after keeping at 50 °C for 1 h, which was 6.6 time higher than the parent enzyme (8.6%). Circular dichroism (CD) spectroscopy revealed that Tm values of the parent enzyme, K94R, G221A and K94R/G221A were 51.5 ℃, 53.8 ℃, 53.1 ℃ and 54.8 ℃, respectively. According to the protein structure simulation, the two mutations were located on flexible loop. In the K94R mutant, the mutated Arg94 on the surface of the enzyme formed an extra hydrogen bond with Ile95, which stabilized the located loop. In the G221A mutant, the mutated Ala221 formed hydrophobic interaction with Leu281, which could stabilize both the loop and flexible area of the C-terminus of G221A. The results not only provided a reference for protein modification on thermal stability, but also laid the foundation for application of phenylalanine hydroxylase in the field of functional foods.

Objectives: The origin of KPC is unknown. The aim of this study was to detect progenitors of KPC in silico and to functionally verify their β-lactam hydrolysis activity., Methods: The sequence of KPC-2 was used to mine the NCBI protein sequence database. The best non-KPC hits were analysed by amino acid (aa) alignment and phylogenetic tree construction. Genes encoding KPC-2 homologues were expressed in Escherichia coli. The carbapenemase activities of the recombinant strains were characterized by the CarbaNP test and UV spectrophotometry and MICs of selected β-lactams were determined., Results: Genes encoding the closest KPC-2 homologues were identified on the chromosome of Chromobacterium piscinae strain ND17 (CRP-1, 76% aa identity), Chromobacterium sp. C-61 (CRS-1, 70% aa identity) and Chromobacterium haemolyticum DSM19808 (CRH-1, 69% aa identity). All three Chromobacterium β-lactamases were phylogenetically more related to KPC than to other Ambler class A β-lactamases. The 27 bp region preceding the start codon of blaCRP-1 displayed high nucleotide identity to the corresponding region upstream from blaKPC (74%). Heterologous expression of blaCRP-1 and to a lesser extent of blaCRH-1 in E. coli significantly increased the MICs of meropenem and most cephalosporins. The CarbaNP test was positive for both recombinant strains, but spectrophotometric analysis confirmed higher carbapenemase activity for CRP-1-producing clones., Conclusions: The recovery of three class A β-lactamases with up to 76% aa identity to KPC from distinct Chromobacterium species is highly indicative of the role played by this genus in the evolution of KPC., (© The Author 2016. Published by Oxford University Press on behalf of the British Society for Antimicrobial Chemotherapy. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.)

Polyhydroxyalkanoates (PHAs) are carbon and energy storage polymers produced by a variety of microbial organisms under nutrient-limited conditions. They have been considered as an environmentally friendly alternative to oil-based plastics due to their renewability, versatility, and biodegradability. PHA synthase (PhaC) plays a central role in PHA biosynthesis, in which its activity and substrate specificity are major factors in determining the productivity and properties of the produced polymers. However, the effects of modifying the substrate side chain are not well understood because of the difficulty to accessing the desired analogues. In this report, a series of 3-(R)-hydroxyacyl coenzyme A (HACoA) analogues were synthesized and tested with class I synthases from Chromobacterium sp. USM2 (PhaCCs and A479S-PhaCCs) and Caulobacter crescentus (PhaCCc) as well as class III synthase from Allochromatium vinosum (PhaECAv). It was found that, while different PHA synthases displayed distinct preference with regard to the length of the alkyl side chains, they could withstand moderate side chain modifications such as terminal unsaturated bonds and the azide group. Specifically, the specific activity of PhaCCs toward propynyl analogue (HHxyCoA) was only 5-fold less than that toward the classical substrate HBCoA. The catalytic efficiency (kcat/Km) of PhaECAv toward azide analogue (HABCoA) was determined to be 2.86 × 10(5) M(-1) s(-1), which was 6.2% of the value of HBCoA (4.62 × 10(6) M(-1) s(-1)) measured in the presence of bovine serum albumin (BSA). These side chain modifications may be employed to introduce new material functions to PHAs as well as to study PHA biogenesis via click-chemistry, in which the latter remains unknown and is important for metabolic engineering to produce PHAs economically.

PHA synthase (PhaC) is the key enzyme in the production of biodegradable plastics known as polyhydroxyalkanoate (PHA). Nevertheless, most of these enzymes are isolated from cultivable bacteria using traditional isolation method. Most of the microorganisms found in nature could not be successfully cultivated due to the lack of knowledge on their growth conditions. In this study, a culture-independent approach was applied. The presence of phaC genes in limestone soil was screened using primers targeting the class I and II PHA synthases. Based on the partial gene sequences, a total of 19 gene clusters have been identified and 7 clones were selected for full length amplification through genome walking. The complete phaC gene sequence of one of the clones (SC8) was obtained and it revealed 81% nucleotide identity to the PHA synthase gene of Chromobacterium violaceum ATCC 12472. This gene obtained from uncultured bacterium was successfully cloned and expressed in a Cupriavidus necator PHB(-)4 PHA-negative mutant resulting in the accumulation of significant amount of PHA. The PHA synthase activity of this transformant was 64 ± 12 U/g proteins. This paper presents a pioneering study on the discovery of phaC in a limestone area using metagenomic approach. Through this study, a new functional phaC was discovered from uncultured bacterium. Phylogenetic classification for all the phaCs isolated from this study has revealed that limestone hill harbors a great diversity of PhaCs with activities that have not yet been investigated., (Copyright © 2015 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.)

Carbapenems are last-resort antibiotics to handle serious infections caused by multiresistant bacteria. The incidence of resistance to these antibiotics has been increasing and new resistance mechanisms have emerged. The dissemination of carbapenem resistance in the environment has been overlooked. The main goal of this research was to assess the prevalence and diversity of carbapenem-resistant bacteria in riverine ecosystems. The presence of frequently reported carbapenemase-encoding genes was inspected. The proportion of imipenem-resistant bacteria was on average 2.24 CFU/ml. Imipenem-resistant strains (n=110) were identified as Pseudomonas spp., Stenotrophomonas maltophilia, Aeromonas spp., Chromobacterium haemolyticum, Shewanella xiamenensis, and members of Enterobacteriaceae. Carbapenem-resistant bacteria were highly resistant to other beta-lactams such as quinolones, aminoglycosides, chloramphenicol, tetracyclines, and sulfamethoxazole/trimethoprim. Carbapenem resistance was mostly associated with intrinsically resistant bacteria. As intrinsic resistance mechanisms, we have identified the blaCphA gene in 77.3% of Aeromonas spp., blaL1 in all S. maltophilia, and blaOXA-48-like in all S. xiamenensis. As acquired resistance mechanisms, we have detected the blaVIM-2 gene in six Pseudomonas spp. (5.45%). Integrons with gene cassettes encoding resistance to aminoglycosides (aacA and aacC genes), trimethoprim (dfrB1b), and carbapenems (blaVIM-2) were found in Pseudomonas spp. Results suggest that carbapenem resistance dissemination in riverine ecosystems is still at an early stage. Nevertheless, monitoring these aquatic compartments for the presence of resistance genes and its host organisms is essential to outline strategies to minimize resistance dissemination.

Heterologous gene expression can be a significant burden for cells. Here we describe an in vivo monitor that tracks changes in the capacity of Escherichia coli in real time and can be used to assay the burden imposed by synthetic constructs and their parts. We identify construct designs with reduced burden that predictably outperformed less efficient designs, despite having equivalent output.

Background: In white biotechnology biocatalysis represents a key technology for chemical functionalization of non-natural compounds. The plasmid-born overproduction of an alcohol dehydrogenase, an L-alanine-dependent transaminase and an alanine dehydrogenase allows for redox self-sufficient amination of alcohols in whole cell biotransformation. Here, conditions to optimize the whole cell biocatalyst presented in (Bioorg Med Chem 22:5578-5585, 2014), and the role of L-alanine for efficient amine functionalization of 1,10-decanediol to 1,10-diaminodecane were analyzed., Results: The enzymes of the cascade for amine functionalization of alcohols were characterized in vitro to find optimal conditions for an efficient process. Transaminase from Chromobacterium violaceum, TaCv, showed three-fold higher catalytic efficiency than transaminase from Vibrio fluvialis, TaVf, and improved production at 37°C. At 42°C, TaCv was more active, which matched thermostable alcohol dehydrogenase and alanine dehydrogenase and improved the 1,10-diaminodecane production rate four-fold. To study the role of L-alanine in the whole cell biotransformation, the L-alanine concentration was varied and 1,10.diaminodecane formation tested with constant 10 mM 1,10- decanediol and 100 mM NH4Cl. Only 5.6% diamine product were observed without added L-alanine. L-alanine concentrations equimolar to that of the alcohol enabled for 94% product formation but higher L-alanine concentrations allowed for 100% product formation. L-alanine was consumed by the E. coli biocatalyst, presumably due to pyruvate catabolism since up to 16 mM acetate accumulated. Biotransformation employing E. coli strain YYC202/pTrc99a-ald-adh-ta Cv, which is unable to catabolize pyruvate, resulted in conversion with a selectivity of 42 mol-%. Biotransformation with E. coli strains only lacking pyruvate oxidase PoxB showed similar reduced amination of 1,10-decanediol indicating that oxidative decarboxylation of pyruvate to acetate by PoxB is primarily responsible for pyruvate catabolism during redox self-sufficient amination of alcohols using this whole cell biocatalyst., Conclusion: The replacement of the transaminase TaVf by TaCv, which showed higher activity at 42°C, in the artificial operon ald-adh-ta improved amination of alcohols in whole cell biotransformation. The addition of L-alanine, which was consumed by E. coli via pyruvate catabolism, was required for 100% product formation possibly by providing maintenance energy. Metabolic engineering revealed that pyruvate catabolism occurred primarily via oxidative decarboxylation to acetate by PoxB under the chosen biotranformation conditions.

The named "green chemistry" has been receiving increasing prominence due to its environmentally friendly characteristics. The use of enzymes as catalysts in processes of synthesis to replace the traditional use of chemical catalysts present as main advantage the fact of following the principles of the green chemistry. However, processes of enzymatic nature generally provide lower yields when compared to the conventional chemical processes. Therefore, in the last years, the ultrasound has been extensively used in enzymatic processes, such as the production of esters with desirable characteristics for the pharmaceutical, cosmetics, and food industry, for the hydrolysis and glycerolysis of vegetable oils, production of biodiesel, etc. Several works found in the open literature suggest that the energy released by the ultrasound during the cavitation phenomena can be used to enhance mass transfer (substrate/enzyme), hence increasing the rate of products formation, and also contributing to enhance the enzyme catalytic activity. Furthermore, the ultrasound is considered a "green" technology due to its high efficiency, low instrumental requirement and significant reduction of the processing time in comparison to other techniques. The main goal of this review was to summarize studies available to date regarding the application of ultrasound in enzyme-catalyzed esterification, hydrolysis, glycerolysis and transesterification reactions.

The catalytic domains of aromatic amino acid hydroxylases (AAAHs) contain a non-heme iron coordinated to a 2-His-1-carboxylate facial triad and two water molecules. Asp139 from Chromobacterium violaceum PAH (cPAH) resides within the second coordination sphere and contributes key hydrogen bonds with three active site waters that mediate its interaction with an oxidized form of the cofactor, 7,8-dihydro-l-biopterin, in crystal structures. To determine the catalytic role of this residue, various point mutants were prepared and characterized. Our isothermal titration calorimetry (ITC) analysis of iron binding implies that polarity at position 139 is not the sole criterion for metal affinity, as binding studies with D139E suggest that the size of the amino acid side chain also appears to be important. High-resolution crystal structures of the mutants reveal that Asp139 may not be essential for holding the bridging water molecules together, because many of these waters are retained even in the Ala mutant. However, interactions via the bridging waters contribute to cofactor binding at the active site, interactions for which charge of the residue is important, as the D139N mutant shows a 5-fold decrease in its affinity for pterin as revealed by ITC (compared to a 16-fold loss of affinity in the case of the Ala mutant). The Asn and Ala mutants show a much more pronounced defect in their kcat values, with nearly 16- and 100-fold changes relative to that of the wild type, respectively, indicating a substantial role of this residue in stabilization of the transition state by aligning the cofactor in a productive orientation, most likely through direct binding with the cofactor, supported by data from molecular dynamics simulations of the complexes. Our results indicate that the intervening water structure between the cofactor and the acidic residue masks direct interaction between the two, possibly to prevent uncoupled hydroxylation of the cofactor before the arrival of phenylalanine. It thus appears that the second-coordination sphere Asp residue in cPAH, and, by extrapolation, the equivalent residue in other AAAHs, plays a role in fine-tuning pterin affinity in the ground state via deformable interactions with bridging waters and assumes a more significant role in the transition state by aligning the cofactor through direct hydrogen bonding.

This work aims to establish microscale methods to rapidly explore bioprocess options that might be used to enhance bioconversion reaction yields: either by shifting unfavourable reaction equilibria or by overcoming substrate and/or product inhibition. As a typical and industrially relevant example of the problems faced we have examined the asymmetric synthesis of (2S,3R)-2-amino-1,3,4-butanetriol from l-erythrulose using the ω-transaminase from Chromobacterium violaceum DSM30191 (CV2025 ω-TAm) and methylbenzylamine as the amino donor. The first process option involves the use of alternative amino donors. The second couples the CV2025 ω-TAm with alcohol dehydrogenase and glucose dehydrogenase for removal of the acetophenone (AP) by-product by in situ conversion to (R)-1-phenylethanol. The final approaches involve physical in-situ product removal methods. Reduced pressure conditions, attained using a 96-well vacuum manifold were used to selectively increase evaporation of the volatile AP while polymeric resins were also utilised for selective adsorption of AP from the bioconversion medium. For the particular reaction studied here the most promising bioprocess options were use of an alternative amino donor, such as isopropylamine, which enabled a 2.8-fold increase in reaction yield, or use of a second enzyme system which achieved a 3.3-fold increase in yield.

This article delineates the formation and characterization of different enzyme-carbon dot conjugates in aqueous medium (pH = 7.0). We used soybean peroxidase (SBP), Chromobacterium viscosum (CV) lipase, trypsin, and cytochrome c (cyt c) for the formation of conjugate either with cationic carbon dot (CCD) or anionic carbon dot (ACD) depending on the overall charge of the protein at pH 7.0. These nanobioconjugates were used to probe the location of enzymes in water-in-oil (w/o) microemulsion. The size of the synthesized water-soluble carbon dots were of 2-3 nm with distinctive emission property. The formation of enzyme/protein-carbon dot conjugates in aqueous buffer was confirmed via fluorescence spectroscopy and zeta potential measurement, and the structural alteration of enzyme/protein was monitored by circular dichroism spectroscopy. Biocatalytic activities of protein/enzymes in conjugation with carbon dots were found to be decreased in aqueous phosphate buffer (pH 7.0, 25 mM). Interestingly, the catalytic activity of the nanobioconjugates of SBP, CV lipase, and cyt c did not reduce in cetyltrimethylammonium bromide (CTAB)-based reverse micelle. It indicates different localization of carbon dots and the enzymes inside the reverse micelle. The hydrophilic carbon dots always preferred to be located in the water pool of reverse micelle, and thus, enzyme must be located away from the water pool, which is the interface. However, in case of trypsin-carbon dot conjugate, the enzyme activity notably decreased in reverse micelle in the presence of carbon dot in a similar way that was observed in water. This implies that trypsin and carbon dots both must be located at the same place, which is the water pool of reverse micelle. Carbon dot induced deactivation was not observed for those enzymes which stay away from the water pool and localized at the interfacial domain while deactivation is observed for those enzymes which reside at the water pool. Thus, the location of enzymes in the microdomain of w/o microemulsion can be predicted by comparing the activity profile of enzyme-carbon dot conjugate in water and w/o microemulsion.

The disulfide bond is unusual in natural products and critical for thermal stability, cell permeability and bioactivity. DepH from Chromobacterium violaceum No. 968 is an FAD-dependent enzyme responsible for catalyzing the disulfide bond formation of FK228, an anticancer prodrug approved for the treatment of cutaneous T-cell lymphoma. Here we report the crystal structures of DepH and DepH complexed with a substrate analogue S,S'-dimethyl FK228 at 1.82 Å and 2.00 Å, respectively. Structural and biochemical analyses revealed that DepH, in contrast to the well characterized low molecular weight thioredoxin reductases (LMW TrxRs), is an NADP(+)-independent dithiol oxidase. DepH not only lacks a conserved GGGDXAXE motif necessary for NADP(+) binding in the canonical LMW TrxRs, but also contains a 11-residue sequence which physically impedes the binding of NADP(+). These observations explain the difference between NADP(+)-independent small molecule dithiol oxidases and NADP(+)-dependent thioredoxin reductases and provide insights for understanding the catalytic mechanism of dithiol oxidases involved in natural product biosynthesis.

Nature provides a rich source of compounds with diverse chemical structures and biological activities, among them, sulfur-containing metabolites from bacteria and fungi. Some of these compounds bear a disulfide moiety that is indispensable for their bioactivity. Specialized oxidoreductases such as GliT, HlmI, and DepH catalyze the formation of this disulfide bridge in the virulence factor gliotoxin, the antibiotic holomycin, and the anticancer drug romidepsin, respectively. We have examined all three enzymes by X-ray crystallography and activity assays. Despite their differently sized substrate binding clefts and hence, their diverse substrate preferences, a unifying reaction mechanism is proposed based on the obtained crystal structures and further supported by mutagenesis experiments., (Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

In bacteria, 3',5'-adenosine bisphosphate (pAp) is generated from 3'-phosphoadenosine 5'-phosphosulfate in the sulfate assimilation pathway, and from coenzyme A by the transfer of the phosphopantetheine group to the acyl-carrier protein. pAp is subsequently hydrolyzed to 5'-AMP and orthophosphate, and this reaction has been shown to be important for superoxide stress tolerance. Herein, we report the discovery of the first instance of an enzyme from the amidohydrolase superfamily that is capable of hydrolyzing pAp. Crystal structures of Cv1693 from Chromobacterium violaceum have been determined to a resolution of 1.9 Å with AMP and orthophosphate bound in the active site. The enzyme has a trinuclear metal center in the active site with three Mn(2+) ions. This enzyme (Cv1693) belongs to the Cluster of Orthologous Groups cog0613 from the polymerase and histidinol phosphatase family of enzymes. The values of kcat and kcat/Km for the hydrolysis of pAp are 22 s(-1) and 1.4 × 10(6) M(-1) s(-1), respectively. The enzyme is promiscuous and is able to hydrolyze other 3',5'-bisphosphonucleotides (pGp, pCp, pUp, and pIp) and 2'-deoxynucleotides with comparable catalytic efficiency. The enzyme is capable of hydrolyzing short oligonucleotides (pdA)5, albeit at rates much lower than that of pAp. Enzymes from two other enzyme families have previously been found to hydrolyze pAp at physiologically significant rates. These enzymes include CysQ from Escherichia coli (cog1218) and YtqI/NrnA from Bacillus subtilis (cog0618). Identification of the functional homologues to the experimentally verified pAp phosphatases from cog0613, cog1218, and cog0618 suggests that there is relatively little overlap of enzymes with this function in sequenced bacterial genomes.

Phenylalanine hydroxylase (PAH) is a non-heme iron enzyme that catalyzes oxidation of phenylalanine to tyrosine, a reaction that must be kept under tight regulatory control. Mammalian PAH has a regulatory domain in which binding of the substrate leads to allosteric activation of the enzyme. However, the existence of PAH regulation in evolutionarily distant organisms, for example some bacteria in which it occurs, has so far been underappreciated. In an attempt to crystallographically characterize substrate binding by PAH from Chromobacterium violaceum, a single-domain monomeric enzyme, electron density for phenylalanine was observed at a distal site 15.7 Å from the active site. Isothermal titration calorimetry (ITC) experiments revealed a dissociation constant of 24 ± 1.1 μM for phenylalanine. Under the same conditions, ITC revealed no detectable binding for alanine, tyrosine, or isoleucine, indicating the distal site may be selective for phenylalanine. Point mutations of amino acid residues in the distal site that contact phenylalanine (F258A, Y155A, T254A) led to impaired binding, consistent with the presence of distal site binding in solution. Although kinetic analysis revealed that the distal site mutants suffer discernible loss of their catalytic activity, X-ray crystallographic analysis of Y155A and F258A, the two mutants with the most noticeable decrease in activity, revealed no discernible change in the structure of their active sites, suggesting that the effect of distal binding may result from protein dynamics in solution.

Background: Chromobacterium violaceum is a free-living β-proteobacterium found in tropical and subtropical regions. The genomic sequencing of C. violaceum ATCC 12472 has revealed many genes that underpin its adaptability to diverse ecosystems. Moreover, C. violaceum genes with potential applications in industry, medicine and agriculture have also been identified, such as those encoding chitinases. However, none of the chitinase genes of the ATCC 12472 strain have been subjected to experimental validation. Chitinases (EC 3.2.1.14) hydrolyze the β-(1,4) linkages in chitin, an abundant biopolymer found in arthropods, mollusks and fungi. These enzymes are of great biotechnological interest as potential biocontrol agents against pests and pathogens. This work aimed to experimentally validate one of the chitinases from C. violaceum., Results: The open reading frame (ORF) CV2935 of C. violaceum ATCC 12472 encodes a protein (439 residues) that is composed of a signal peptide, a chitin-binding domain, a linker region, and a C-terminal catalytic domain belonging to family 18 of the glycoside hydrolases. The ORF was amplified by PCR and cloned into the expression vector pET303/CT-His. High levels of chitinolytic activity were detected in the cell-free culture supernatant of E. coli BL21(DE3) cells harboring the recombinant plasmid and induced with IPTG. The secreted recombinant protein was purified by affinity chromatography on a chitin matrix and showed an apparent molecular mass of 43.8 kDa, as estimated by denaturing polyacrylamide gel electrophoresis. N-terminal sequencing confirmed the proper removal of the native signal peptide during the secretion of the recombinant product. The enzyme was able to hydrolyze colloidal chitin and the synthetic substrates p-nitrophenyl-β-D-N,N'-diacetylchitobiose and p-nitrophenyl-β-D-N,N',N"-triacetylchitotriose. The optimum pH for its activity was 5.0, and the enzyme retained ~32% of its activity when heated to 60°C for 30 min., Conclusions: A C. violaceum chitinase was expressed in E. coli and purified by affinity chromatography on a chitin matrix. The secretion of the recombinant protein into the culture medium was directed by its native signal peptide. The mature enzyme was able to hydrolyze colloidal chitin and synthetic substrates. This newly identified signal peptide is a promising secretion factor that should be further investigated in future studies, aiming to demonstrate its usefulness as an alternative tool for the extracellular production of recombinant proteins in E. coli.

Saturation point mutagenesis was carried out at position 479 in the polyhydroxyalkanoate (PHA) synthase from Chromobacterium sp. strain USM2 (PhaC(Cs)) with specificities for short-chain-length (SCL) [(R)-3-hydroxybutyrate (3HB) and (R)-3-hydroxyvalerate (3HV)] and medium-chain-length (MCL) [(R)-3-hydroxyhexanoate (3HHx)] monomers in an effort to enhance the specificity of the enzyme for 3HHx. A maximum 4-fold increase in 3HHx incorporation and a 1.6-fold increase in PHA biosynthesis, more than the wild-type synthase, was achieved using selected mutant synthases. These increases were subsequently correlated with improved synthase activity and increased preference of PhaC(Cs) for 3HHx monomers. We found that substitutions with uncharged residues were beneficial, as they resulted in enhanced PHA production and/or 3HHx incorporation. Further analysis led to postulations that the size and geometry of the substrate-binding pocket are determinants of PHA accumulation, 3HHx fraction, and chain length specificity. In vitro activities for polymerization of 3HV and 3HHx monomers were consistent with in vivo substrate specificities. Ultimately, the preference shown by wild-type and mutant synthases for either SCL (C(4) and C(5)) or MCL (C(6)) substrates substantiates the fundamental classification of PHA synthases.

Increasing evidence has shown that antibiotics function as intermicrobial signaling molecules instead of killing weapons. However, mechanisms and key factors that are involved in such functions remain poorly understood. Earlier findings have associated antibiotic signaling with quorum sensing (QS); however, results varied among experiments, antibiotics, and bacterial strains. In this study, we found that antibiotics at subinhibitory concentrations improved the violacein-producing ability of Chromobacterium violaceum ATCC 12472. Quantitative real-time polymerase chain reaction of QS-associated gene transcripts and bioassay of violacein production in a QS mutant strain demonstrated that antibiotics enhanced the production of N-acyl-L-homoserine lactones (AHLs; QS signaling molecules) and increased AHL-inducing QS-mediated virulence, including chitinase production and biofilm formation. Moreover, a positive flagellar activity and an increased bacterial clustering ability were found, which are related to the antibiotic-induced biofilm formation. Our findings suggested that antibiotic-mediated interspecific signaling also occurs in C. violaceum, thereby expanding the knowledge and language of cell-to-cell communication., (© 2013 Federation of European Microbiological Societies. Published by Blackwell Publishing Ltd. All rights reserved.)

The crystal structures and inhibitor complexes of two industrially important ω-aminotransferase enzymes from Pseudomonas aeruginosa and Chromobacterium violaceum have been determined in order to understand the differences in their substrate specificity. The two enzymes share 30% sequence identity and use the same amino acceptor, pyruvate; however, the Pseudomonas enzyme shows activity towards the amino donor β-alanine, whilst the Chromobacterium enzyme does not. Both enzymes show activity towards S-α-methylbenzylamine (MBA), with the Chromobacterium enzyme having a broader substrate range. The crystal structure of the P. aeruginosa enzyme has been solved in the holo form and with the inhibitor gabaculine bound. The C. violaceum enzyme has been solved in the apo and holo forms and with gabaculine bound. The structures of the holo forms of both enzymes are quite similar. There is little conformational difference observed between the inhibitor complex and the holoenzyme for the P. aeruginosa aminotransferase. In comparison, the crystal structure of the C. violaceum gabaculine complex shows significant structural rearrangements from the structures of both the apo and holo forms of the enzyme. It appears that the different rigidity of the protein scaffold contributes to the substrate specificity observed for the two ω-aminotransferases.

An efficient single-enzymatic cascade approach for the asymmetric synthesis of chiral amines has been developed, which applies the amino donor 3-aminocyclohexa-1,5-dienecarboxylic acid spontaneously tautomerizing to reach reaction completion with excellent ee values.

Polarization-resolved second-harmonic generation (PR-SHG) microscopy is described and applied to identify the presence of multiple crystallographic domains within protein-crystal conglomerates, which was confirmed by synchrotron X-ray diffraction. Principal component analysis (PCA) of PR-SHG images resulted in principal component 2 (PC2) images with areas of contrasting negative and positive values for conglomerated crystals and PC2 images exhibiting uniformly positive or uniformly negative values for single crystals. Qualitative assessment of PC2 images allowed the identification of domains of different internal ordering within protein-crystal samples as well as differentiation between multi-domain conglomerated crystals and single crystals. PR-SHG assessments of crystalline domains were in good agreement with spatially resolved synchrotron X-ray diffraction measurements. These results have implications for improving the productive throughput of protein structure determination through early identification of multi-domain crystals.

7-Ketocholesterol (7KC) is a cytotoxic oxysterol that plays a role in many age-related degenerative diseases. 7KC formation and accumulation often occurs in the lysosome, which hinders enzymatic transformations that reduce its toxicity and increase the sensitivity to lysosomal membrane permeabilization. We assayed the potential to mitigate 7KC cytotoxicity and enhance cell viability by overexpressing 7KC-active enzymes in human fibroblasts. One of the enzymes tested, a cholesterol oxidase engineered for lysosomal targeting, significantly increased cell viability in the short term upon treatment with up to 50 µM 7KC relative to controls. These results suggest targeting the lysosome for optimal treatment of oxysterol-mediated cytotoxicity, and support the use of introducing novel catalytic function into the lysosome for therapeutic and research applications., (Copyright © 2012 Wiley Periodicals, Inc.)