Search

An experimental analysis of InGaAsP injection lasers shows an unexpected decrease of the differential quantum efficiency as a function of injected current when optical power is fed back into the active cavity of a diode inserted into a long transmission line. To investigate the response of laser diodes to optical feedback, we base our analysis on a microscopic model, resulting in a set of coupled equations that include the microscopic parameters that characterize the material and the device. This description takes into account the nonlinear dependence of the interband carrier lifetime on the level of optical feedback. Good agreement between the analytical description and experimental data is obtained for threshold current and differential quantum efficiency as functions of the feedback ratio.

The use of eco-friendly engineered nanomaterials represents a recent solution for an effective and safe treatment of contaminated dredging sludge. In this study, an eco-designed engineered material based on cross-linked nanocellulose (CNS) was applied for the first time to decontaminate a real matrix from heavy metals (namely Zn, Ni, Cu, and Fe) and other undesired elements (mainly Ba and As) in a lab-scale study, with the aim to design a safe solution for the remediation of contaminated matrices. Contaminated freshwater sludge was treated with CNS coupled with a filtering fine-mesh net, and the obtained waters were tested for acute and sublethal toxicity. In order to check the safety of the proposed treatment system, toxicity tests were conducted by exposing the bacterium Aliivibrio fischeri and the crustacean Heterocypris incongruens , while subtoxicity biomarkers such as lysosomal membrane stability, genetic, and chromosomal damage assessment were performed on the freshwater bivalve Dreissena polymorpha . Dredging sludge was found to be genotoxic, and such genotoxicity was mitigated by the combined use of CNS and a filtering fine-mesh net. Chemical analyses confirmed the results by highlighting the abetment of target contaminants, indicating the present model as a promising tool in freshwater sludge nanoremediation., Competing Interests: The authors declare no conflicts of interest. Moreover, the funders had no role in the design of the study; in the collection, analyses, or interpretation of data; in the writing of the manuscript; or in the decision to publish the results.

Zinc environmental levels are increasing due to human activities, posing a threat to ecosystems and human health. Therefore, new tools able to remediate Zn contamination in freshwater are highly recommended. Specimens of Dreissena polymorpha (zebra mussel) were exposed for 48 h and 7 days to a wide range of ZnCl 2 nominal concentrations (1-10-50-100 mg/L), including those environmentally relevant. Cellulose-based nanosponges (CNS) were also tested to assess their safety and suitability for Zn removal from freshwater. Zebra mussels were exposed to 50 mg/L ZnCl 2 alone or incubated with 1.25 g/L of CNS (2 h) and then removed by filtration. The effect of Zn decontamination induced by CNS has been verified by the acute toxicity bioassay Microtox ® . DNA primary damage was investigated by the Comet assay; micronuclei frequency and nuclear morphological alterations were assessed by Cytome assay in mussels' haemocytes. The results confirmed the genotoxic effect of ZnCl 2 in zebra mussel haemocytes at 48 h and 7-day exposure time. Zinc concentrations were measured in CNS, suggesting that cellulose-based nanosponges were able to remove Zn(II) by reducing its levels in exposure waters and soft tissues of D. polymorpha in agreement with the observed restoration of genetic damage exerted by zinc exposure alone.

In a specific biosensing application, a nanoplasmonic sensor chip has been tested by an experimental setup based on an aluminum holder and two plastic optical fibers used to illuminate and collect the transmitted light. The studied plasmonic probe is based on gold nanograting, realized on the top of a Poly(methyl methacrylate) (PMMA) chip. The PMMA substrate could be considered as a transparent substrate and, in such a way, it has been already used in previous work. Alternatively, here it is regarded as a slab waveguide. In particular, we have deposited upon the slab surface, covered with a nanograting, a synthetic receptor specific for bovine serum albumin (BSA), to test the proposed biosensing approach. Exploiting this different experimental configuration, we have determined how the orientation of the nanostripes forming the grating pattern, with respect to the direction of the input light (longitudinal or orthogonal), influences the biosensing performances. For example, the best limit of detection (LOD) in the BSA detection that has been obtained is equal to 23 pM. Specifically, the longitudinal configuration is characterized by two observable plasmonic phenomena, each sensitive to a different BSA concentration range, ranging from pM to µM. This aspect plays a key role in several biochemical sensing applications, where a wide working range is required.

The rapid spread of the Coronavirus Disease 2019 (COVID-19) pandemic, caused by the Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) pathogen has generated a huge international public health emergency. Currently the reference diagnostic technique for virus determination is Reverse Transcription Polymerase Chain Reaction (RT-PCR) real time analysis that requires specialized equipment, reagents and facilities and typically 3-4 h to perform. Thus, the realization of simple, low-cost, small-size, rapid and point-of-care diagnostics tests has become a global priority. In response to the current need for quick, highly sensitive and on-site detection of the SARS-CoV-2 virus in several aqueous solutions, a specific molecularly imprinted polymer (MIP) receptor has been designed, realized, and combined with an optical sensor. More specifically, the proof of concept of a SARS-CoV-2 sensor has been demonstrated by exploiting a plasmonic plastic optical fiber sensor coupled with a novel kind of synthetic MIP nano-layer, especially designed for the specific recognition of Subunit 1 of the SARS-CoV-2 Spike protein. First, we have tested the effectiveness of the developed MIP receptor to bind the Subunit 1 of the SARS-CoV-2 spike protein, then the results of preliminary tests on SARS-CoV-2 virions, performed on samples of nasopharyngeal (NP) swabs in universal transport medium (UTM) and physiological solution (0.9% NaCl), were compared with those obtained with RT-PCR. According to these preliminary results, the sensitivity of the proposed optical-chemical sensor proved to be higher than the RT-PCR one. Furthermore, a relatively fast response time (about 10 min) to the virus was obtained without the use of additional reagents.

Feedstock and compost samples were collected from twenty composting plants and analysed from the microbiological point of view. Faecal indicator organisms were determined in order to evaluate the efficacy of processes for the removal of pathogenic micro-organisms with similar survival characteristics and to verify their suitability as appropriate markers of microbial quality of composted products. In addition to the classical bacterial indicators, selected organisms, such as Salmonella, Giardia, Cryptosporidium, Clostridium spores and helminth ova, were investigated. Statistically significant differences in the removal of the different micro-organisms were observed with regard to both the different composting plants (P < 0.05) and feedstock composition (P < 0.05). In fact, compost obtained by feedstock containing sewage sludge was shown to have a better hygienic quality in comparison with compost containing green discards and municipal solid waste as raw matter. Giardia cysts, Cryptosporidium oocysts and helminth ova were not effective indicators of hygienic quality of compost, whereas Clostridium perfringens spores, because of their high resistance to treatments, could be considered as an additional model for assessing the composting process, especially with regard to more resistant pathogen reduction.

The ISO reference method, defined by the European Drinking Water Directive for the enumeration of total coliforms and Escherichia coli in water intended for human consumption, has various limitations, especially related to discrepancies observed with the new taxonomic classification of the coliform group. A study was therefore performed to compare the above reference method with another rapid method, the DST/Colilert, and to evaluate the phenotypical characteristics of isolated microrganisms. The ISO reference method failed to detect a significant proportion of coliforms and E. coli in water and furthermore, it enumerated microrganisms belonging to other groups. The DST/Colilert method was found instead to be a suitable alternative method for the detection of bacterial indicators.

For an efficient analysis of the coupling characteristics of a multimode fiber device using GRIN rod lenses, it is important to consider both the third-order aberration effects of a GRIN rod lens and the actual source fiber optical power distribution. In this paper the ray tracing technique has been used with a set of point sources representing the extended source fiber core. Such a new representation is carried out according to the best agreement with measurable near-field and far-field source fiber distributions. In such a way we determined a set of results that show the relationships between coupling efficiency, lens length, and fiber lateral misalignments, as a function of the radial position of the input fiber. The results obtained pointed out, on the one hand, the poor reliability of the predictions based on a perfectly parabolic profile and, on the other, the dependence of the coupling efficiency vs lateral misalignment relationships on two different excitation distributions: uniform and steady state. The results of the experimental measurements carried out on a 0.5-pitch GRIN rod lens are consistent with the suggested model. Such an approach can be advantageously used in the design of microoptic devices based on GRIN rod lenses, such as multi/demultiplexers, directional couplers, and lens connectors.