Search

The seismic attributes of water‐rich sandstone contain much information about the rock's physical properties and seismic wave parameters. They are commonly used to predict the rock's physical properties (e.g. porosity). However, the seismic attributes of water‐rich sandstone are affected by porosity, water saturation and thickness. To eliminate the influence of thickness on the porosity prediction of water‐rich sandstone and improve the accuracy of the porosity prediction, the authors propose a Lambert W–R transform method to isolate the contribution of thickness and porosity from seismic attributes. First, a rock physical model is used to calculate the equivalent elastic parameters of water‐rich sandstones with different porosity values and water saturation levels. Second, the seismic attribute dataset of water‐rich sandstone is established by forward modelling the seismic response of the wedge‐shaped water‐rich sandstone model, and the selection of sensitive physical properties is completed. Then, the transformation parameters (ζAhRs and ηAhRs) are obtained by Lambert W–R transformation, which is exponentially related to instantaneous amplitude. ζAhRs and ηAhRs are sensitive to thickness and porosity, respectively. Finally, an interpretative template for porosity prediction of water‐rich sandstone is established by cross‐plot analysis (ζAhRs and ηAhRs) and verified by a practical case. The verification results show that the porosity predicted by the interpretation template is consistent with drilling fluid consumption. However, it is lower than the porosity of logging constrained P‐wave impedance inversion. [ABSTRACT FROM AUTHOR]

Petrophysical properties are critical for shale gas reservoir characterization and simulation. The Wufeng-Longmaxi shale, in the south-eastern margin of the Sichuan Basin, is identified as a complex reservoir due to its variability in lithification and geological mechanisms. Thus, determining its characteristics is challenging. Based on wireline logs and pressure data analysis, a shale reservoir was identified, and petrophysical properties were described to obtain parameters to build a reservoir simulation model. The properties include shale volume, sand porosity, net reservoir thickness, total and effective porosities, and water saturation. Total and effective porosities were calculated using density method. Shale volume was estimated by applying the Clavier equation to gamma-ray responses. Sand porosity and net reservoir thickness were evaluated using the Thomas–Stieber model, and the Simandoux equation was used to compute water saturation. The results indicate that the reservoir is characterized by a relatively low porosity and high shale content, with shale unequally distributed in its laminated form (approximately 75%), dispersed (about 20%), and structural form (5%). This research workflow can efficiently evaluate shale reservoir parameters and provide a reliable approach for future reservoir development and fracture identification. [ABSTRACT FROM AUTHOR]

Previous studies demonstrated that seismic attenuation and anisotropy can significantly affect the kinematic and dynamic characteristics of wavefields. If these effects are not incorporated into seismic migration, the resolution of the imaging results will be reduced. Considering the anisotropy of velocity and attenuation, we derive a new pure-viscoacoustic wave equation to simulate P wave propagation in transversely isotropic (TI) attenuating media by combining the complex dispersion relation and modified complex modulus. Compared to the conventional complex modulus, the modified modulus is derived from the optimized relationship between angular frequency and wavenumber, which can improve the modeling accuracy in strongly attenuating media. Wavefield comparisons illustrate that our pure-viscoacoustic wave equation can simulate stable P wavefields in complex geological structures without S-wave artifacts and generate similar P wave information to the pseudo-viscoacoustic wave equation. During the implementation, we introduce two low-rank decompositions to approximate the real and imaginary parts and then use the pseudo-spectral method to solve this new equation. Since the proposed equation can simulate decoupled amplitude attenuation and phase dispersion effects, it is used to perform Q-compensated reverse-time migration (Q-RTM). Numerical examples demonstrate the accuracy and robustness of the proposed method for pure-viscoacoustic wavefield simulations and migration imaging in transversely isotropic attenuating media. [ABSTRACT FROM AUTHOR]

Tectonically deformed coal (TDC) is closely related to gas outbursts. Since TDC exploration is an essential objective for coalfield exploration, it is of great significance to study the petrophysical properties of TDCs and explore their differences. This study collected 17 TDCs and undeformed coal samples from the Huaibei coalfield and ultrasonically tested their petrophysical parameters, including densities, P- and S-wave velocities, and their derived petrophysical parameters (VP/VS ratio, P- and S-wave impedances). Undeformed coal and TDCs with different deformation types (brittle, shear, and plastic deformations) show significant differences in their petrophysical parameters, and cross-plot analysis can directly differentiate them. As with traditional geological methods, acoustically measured petrophysical parameters are good indicators to determine the type of coal deformation. However, the TDCs with the same deformation type have similar petrophysical parameters; it is not easy to distinguish them directly. Instead, the proposed method incorporating principal component analysis and clustering can accurately distinguish up to five classes of TDCs. Different types of tectonic deformation environments and their intensities are highly correlated with the clustering results. This paper also provides essential petrophysical parameters for undeformed coal and TDCs in the Huaibei coalfield, and these parameters can help interpret undeformed coal and TDCs using wireline logs and seismic data. [ABSTRACT FROM AUTHOR]

A comparative experiment was carried out to discuss the detectability and influence factors on heterogeneous distributions of the stress field for underground panels in North China. The panels are situated in the center and the eastern margin of the North China plate, having similar layouts and stress states. Seismic surveys were performed before coal extractions, and travel-time topographies for refracted P-waves from stiff roofs were computed with a ray-based inversion. The tomographic distributions of P-wave velocity were interpreted by a K-means clustering to categorize the stress fields. The estimated high-stress anomalies show strong correlations with the monitored dynamic roof ruptures and high-energy microseisms. Besides, the relationship among high-stress areas, geological factors, and mined-out voids is also discussed through feature comparisons, Monte–Carlo simulations, and point process statistics. Our results show that the curvature variations and the mined-out voids are dominant factors that affect the heterogeneous distribution of the stress field in the panels. However, the leading causes of the curvature variations in the small-scale panels are different, but they do follow the large-scale regional patterns of the geological regime. [ABSTRACT FROM AUTHOR]