Search

The capacity of an artificial recharge field to alter organic matter and the bacterial flora of surface water was assessed by following changes in bacterial communities and composition of natural organic matter (NOM) over the first meter of infiltration depth. The sampling strategy applied in this study ensured that water samples consisted only of infiltrated water, excluding natural groundwater. Water was sampled at 50 and 100 cm below the surface of an infiltration basin divided into two halves; one side was dried and frozen and one was infiltrating water during the winter period prior to the sampling period. Bacterial cell counts, proportions of intact cells and community fingerprints were determined by flow cytometry, and NOM was characterized using total organic carbon (TOC), UV254 nm-absorbance (UVA) and fluorescence spectroscopy. Around 40% of the NOM was removed after only 50 cm. Protein-like components were reduced to a larger extent (45–50%) than the humic-like components (25%), suggesting removal of mostly biodegradable fractions of NOM. After only 50 cm of infiltration, about 99% total cell count (TCC) was removed. The flow cytometric data revealed that the bacterial communities collected after infiltration from the basin area that had been dried and frozen were more similar to those in the raw water. This suggests that drying and freezing the basin negatively impacted its treatment capacity. The results from this study highlight the importance of a well-developed biofilm and unsaturated zone for artificial recharge.

A site in mid-western Sweden contaminated with chlorinated solvents originating from a previous dry cleaning facility, was investigated using conventional groundwater analysis combined with compound-specific isotope data of carbon, microbial DNA analysis, and geoelectrical tomography techniques. We show the value of this multidisciplinary approach, as the different results supported each interpretation, and show where natural degradation occurs at the site. The zone where natural degradation occurred was identified in the transition between two geological units, where the change in hydraulic conductivity may have facilitated biofilm formation and microbial activity. This observation was confirmed by all methods and the examination of the impact of geological conditions on the biotransformation process was facilitated by the unique combination of the applied methods. There is thus significant benefit from deploying an extended array of methods for these investigations, with the potential to reduce costs involved in remediation of contaminated sediment and groundwater. Electronic supplementary material The online version of this article (10.1007/s13280-020-01418-5) contains supplementary material, which is available to authorized users.

While pipe biofilms in DWDSs (drinking water distribution systems) are thought to affect the quality of distributed water, studies regarding the microbial processes are impeded by the difficulties in accessing biofilm undisturbed by DWDS maintenance. In this study, pipe sections were removed from a fully operational DWDS for biofilm sampling over two years and three months, and before and after start of ultrafiltration (UF) with coagulation treatment in the drinking water treatment plant (DWTP). Water (n = 31), surface biofilm (obtained by swabbing, n = 34) and deep pipe biofilm (obtained by scraping, n = 34) were analyzed with 16S rRNA gene amplicon sequencing; with flow cytometry, and chemical and natural organic matter (NOM) analysis as additional parameters for water quality. UF with coagulation decreased the total cell concentration in the DWDS bulk water from 6.0 × 105 ± 2.3 × 105 cells per ml to 6.0 × 103 ± 8.3 × 103 cells per ml, including fluctuations due to seasonal change, as well as decreasing most analyzed fractions of NOM. UF treatment of the water revealed that 75% ± 18% of the cells in the water originated from DWDS biofilm, confirmed by SourceTracker analysis, with the rest of the cells likely released from biofilm on DWTP storage tanks. Following UF start, the ASVs (amplicon sequence variants) in the deep pipe biofilm decreased, and Evenness and Shannon diversity indices decreased, reflecting the community's response to the new environment created by the altered water quality. The pipe biofilm community was dominated by ASVs classified as Nitrosomonadaceae, Nitrospira, Hyphomicrobium and Sphingomonas, with relative abundances ranging from 5–78%, and also included ASVs of genus Mycobacterium, genus Legionella and order Legionellales. This community composition, together with the observation that turnover of nitrogen compounds was unchanged by UF start, indicate that nitrification in the DWDS was localized to the pipe biofilm.

Safe drinking water is delivered to the consumer through kilometres of pipes. These pipes are lined with biofilm, which is thought to affect water quality by releasing bacteria into the drinking water. This study describes the number of cells released from this biofilm, their cellular characteristics, and their identity as they shaped a drinking water microbiome. Installation of ultrafiltration (UF) at full scale in Varberg, Sweden reduced the total cell count to 1.5 × 103 ± 0.5 × 103 cells mL−1 in water leaving the treatment plant. This removed a limitation of both flow cytometry and 16S rRNA amplicon sequencing, which have difficulties in resolving small changes against a high background cell count. Following installation, 58% of the bacteria in the distributed water originated from the pipe biofilm, in contrast to before, when 99.5% of the cells originated from the treatment plant, showing that UF shifts the origin of the drinking water microbiome. The number of bacteria released from the biofilm into the distributed water was 2.1 × 103 ± 1.3 × 103 cells mL−1 and the percentage of HNA (high nucleic acid) content bacteria and intact cells increased as it moved through the distribution system. DESeq2 analysis of 16S rRNA amplicon reads showed increases in 29 operational taxonomic units (OTUs), including genera identified as Sphingomonas, Nitrospira, Mycobacterium, and Hyphomicrobium. This study demonstrated that, due to the installation of UF, the bacteria entering a drinking water microbiome from a pipe biofilm could be both quantitated and described.

Water in a full-scale drinking water treatment plant was irradiated with ultraviolet (UV) doses of 250, 400, and 600 J/m2, and the effect on bacterial communities investigated using 16s rRNA gene amplicon sequencing, heterotrophic plate counts (HPCs), coliform, and Escherichia coli counts. The bacteria in the irradiated water were also analyzed following storage for 6 days at 7 °C, to approximate the conditions in the distribution system. The log10 reduction of HPCs at 400 J/m2 was 0.43 ± 0.12. Phylogenetic examination, including DESeq2 analysis, showed that Actinobacteria was more resistant to UV irradiation, whereas Bacteroidetes was sensitive to UV. Phylum Proteobacteria contained monophyletic groups that were either sensitive or resistant to UV exposure. The amplicon sequence variants (ASVs) resistant to UV irradiation had a greater average GC content than the ASVs sensitive to UV, at 55% ± 1.7 (n = 19) and 49% ± 2.5 (n = 16), respectively. Families Chitinophagaceae, Pelagibacteraceae, Holophagaceae, Methylophilaceae, and Cytophagaceae decreased linearly in relative abundance, with increasing UV dose (P Chitinophagaceae, Comamonadaceae, and Flavobacteriaceae families decreased in relative abundance, whereas ACK-M1, Mycobacteriaceae, and Nitrosomonadaceae were increasing in relative abundance. This suggests that the impact of UV irradiation cannot only be considered directly after application but that this treatment step likely continues to influence microbial dynamics throughout the distribution system.

Valorization of lignocellulose (nonedible plant matter) is of key interest for the sustainable production of chemicals from renewable resources. Lignin, one of the main constituents of lignocellulose, is a heterogeneous aromatic biopolymer that can be chemically depolymerized into a heterogeneous mixture of aromatic building blocks; those can be further converted by certain microbes into value-added aromatic chemicals, e.g., the flavoring agent vanillin. We previously isolated a Pseudomonas sp. strain with the (for the genus) unusual trait of vanillyl alcohol production during growth on vanillin. Whole-genome sequencing of the isolate led to the identification of a vanillin reductase candidate gene whose deletion in a recombinant vanillin-accumulating P. putida strain almost completely alleviated the undesired vanillyl alcohol by-product yield. These results represent an important step toward biotechnological production of vanillin from lignin using bacterial cell factories., Microbial degradation of lignin and its related aromatic compounds has great potential for the sustainable production of chemicals and bioremediation of contaminated soils. We previously isolated Pseudomonas sp. strain 9.1 from historical waste deposits (forming so-called fiber banks) released from pulp and paper mills along the Baltic Sea coast. The strain accumulated vanillyl alcohol during growth on vanillin, and while reported in other microbes, this phenotype is less common in wild-type pseudomonads. As the reduction of vanillin to vanillyl alcohol is an undesired trait in Pseudomonas strains engineered to accumulate vanillin, connecting the strain 9.1 phenotype with a genotype would increase the fundamental understanding and genetic engineering potential of microbial vanillin metabolism. The genome of Pseudomonas sp. 9.1 was sequenced and assembled. Annotation identified oxidoreductases with homology to Saccharomyces cerevisiae alcohol dehydrogenase ScADH6p, known to reduce vanillin to vanillyl alcohol, in both the 9.1 genome and the model strain Pseudomonas putida KT2440. Recombinant expression of the Pseudomonas sp. 9.1 FEZ21_09870 and P. putida KT2440 PP_2426 (calA) genes in Escherichia coli revealed that these open reading frames encode aldehyde reductases that convert vanillin to vanillyl alcohol, and that P. putida KT2440 PP_3839 encodes a coniferyl alcohol dehydrogenase that oxidizes coniferyl alcohol to coniferyl aldehyde (i.e., the function previously assigned to calA). The deletion of PP_2426 in P. putida GN442 engineered to accumulate vanillin resulted in a decrease in by-product (vanillyl alcohol) yield from 17% to ∼1%. Based on these results, we propose the reannotation of PP_2426 and FEZ21_09870 as areA and PP_3839 as calA-II. IMPORTANCE Valorization of lignocellulose (nonedible plant matter) is of key interest for the sustainable production of chemicals from renewable resources. Lignin, one of the main constituents of lignocellulose, is a heterogeneous aromatic biopolymer that can be chemically depolymerized into a heterogeneous mixture of aromatic building blocks; those can be further converted by certain microbes into value-added aromatic chemicals, e.g., the flavoring agent vanillin. We previously isolated a Pseudomonas sp. strain with the (for the genus) unusual trait of vanillyl alcohol production during growth on vanillin. Whole-genome sequencing of the isolate led to the identification of a vanillin reductase candidate gene whose deletion in a recombinant vanillin-accumulating P. putida strain almost completely alleviated the undesired vanillyl alcohol by-product yield. These results represent an important step toward biotechnological production of vanillin from lignin using bacterial cell factories.

While slow sand filters (SSFs) have produced drinking water for more than a hundred years, understanding of their associated microbial communities is limited. In this study, bacteria in influent and effluent water from full-scale SSFs were explored using flow cytometry (FCM) with cytometric histogram image comparison (CHIC) analysis; and routine microbial counts for heterotrophs, total coliforms and Escherichia coli. To assess if FCM can monitor biofilm function, SSFs differing in age and sand composition were compared. FCM profiles from two established filters were indistinguishable. To examine biofilm in the deep sand bed, SSFs were monitored during a scraping event, when the top layer of sand and the schmutzdecke are removed to restore flow through the filter. The performance of an established SSF was stable: total organic carbon (TOC), pH, numbers of heterotrophs, coliforms, E. coli, and FCM bacterial profile were unaffected by scraping. However, the performance of two newly-built SSFs containing new and mixed sand was compromised: breakthrough of both microbial indicators and TOC occurred following scraping. The compromised performance of the new SSFs was reflected in distinct effluent bacterial communities; and, the presence of microbial indicators correlated to influent bacterial communities. This demonstrated that FCM can monitor SSF performance. Removal of the top layer of sand did not alter the effluent water from the established SSF, but did affect that of the SSFs containing new sand. This suggests that the impact of the surface biofilm on effluent water is greater when the deep sand bed biofilm is not established.

Microbial monitoring of drinking water is required to guarantee high quality water and to mitigate health hazards. Flow cytometry (FCM) is a fast and robust method that determines bacterial concentrations in liquids. In this study, FCM was applied to monitor the dynamics of the bacterial communities over one year in a full-scale drinking water distribution system (DWDS), following implementation of ultrafiltration (UF) combined with coagulation at the drinking water treatment plant (DWTP). Correlations between the environmental conditions in the DWDS and microbial regrowth were observed, including increases in total cell counts with increasing retention time (correlation coefficient R = 0.89) and increasing water temperature (up to 5.24-fold increase in cell counts during summer). Temporal and spatial biofilm dynamics affecting the water within the DWDS were also observed, such as changes in the percentage of high nucleic acid bacteria with increasing retention time (correlation coefficient R = &minus, 0.79). FCM baselines were defined for specific areas in the DWDS to support future management strategies in this DWDS, including a gradual reduction of chloramine.

4-alpha-Glucanotransferase (GTase) enzymes (EC 2.4.1.25) modulate the size of alpha-glucans by cleaving and reforming alpha-1,4 glycosidic bonds in alpha-glucans, an essential process in starch and glycogen metabolism in plants and microorganisms. The glycoside hydrolase family 57 enzyme (GTase57) studied in the current work catalyzes both disproportionation and cyclization reactions. Amylose was converted into cyclic amylose (with a minimum size of 17 glucose monomers) as well as to a spectrum of maltodextrins, but in contrast to glycoside hydrolase family 13 cyclodextrin glucanotransferases (CGTases), no production of cyclodextrins (C6-C8) was observed. GTase57 also effectively produced alkyl-glycosides with long alpha-glucan chains from dodecyl-beta-D-maltoside and starch, demonstrating the potential of the enzyme to produce novel variants of surfactants. Importantly, the GTase57 has excellent thermostability with a maximal activity at 95 A degrees C and an activity half-life of 150 min at 90 A degrees C which is highly advantageous in this manufacturing process suggesting that enzymes from this relatively uncharacterized family, GH57, can be powerful biocatalysts for the production of large head group glucosides from soluble starch.

Methods for simple and fast detection and differentiation of bacterial species are required, for instance, in medicine, water quality monitoring, and the food industry. Here, we have developed a novel label array method for the counting and differentiation of bacterial species. This method is based on the nonspecific interactions of multiple unstable lanthanide chelates and selected chemicals within the sample leading to a luminescence signal profile that is unique to the bacterial species. It is simple, cost-effective, and/or user-friendly compared to many existing methods, such as plate counts on selective media, automatic (hemocytometer-based) cell counters, flow cytometry, and polymerase chain reaction (PCR)-based methods for identification. The performance of the method was demonstrated with nine single strains of bacteria in pure culture. The limit of detection for counting was below 1000 bacteria per mL, with an average coefficient of variation of 10% achieved with the developed label array. A predictive model was trained with the measured luminescence signals and its ability to differentiate all tested bacterial species from each other, including members of the same genus Bacillus licheniformis and Bacillus subtilis, was confirmed via leave-one-out cross-validation. The suitability of the method for analysis of mixtures of bacterial species was shown with ternary mixtures of Bacillus licheniformis, Escherichia coli JM109, and Lactobacillus reuteri ATCC PTA 4659. The potential future application of the method could be monitoring for contamination in pure cultures; analysis of mixed bacterial cultures, where examining one species in the presence of another could inform industrial microbial processes; and the analysis of bacterial biofilms, where nonspecific methods based on physical and chemical characteristics are required instead of methods specific to individual bacterial species.

Pediococcus parvulus 2.6 (previously Pediococcus damnosus 2.6, here confirmed as P. parvulus by 16S DNA sequencing) displayed antibacterial activity toward several bacterial species, including isolates found as contaminants in oats, herein genetically identified as Bacillus cereus. No inhibition of Listeria monocytogenes was found under the conditions used. Antibacterial activity was retrieved after ammonium sulfate or acetone precipitation showed it to be peptide mediated. P. parvulus 2.6 has previously shown good technological properties in oat-based products. This, together with the currently found inhibition of food spoilage microorganisms like B. cereus, makes it suitable as a food protective culture. Survival trials of P. parvulus 2.6 at conditions mimicking the gastrointestinal tract were prompted by previously found cholesterol-lowering effects in humans after consumption of oat products cofermented by using P. parvulus 2.6 and Bifidobacterium spp. Viability was measured with in vitro, gutlike simulations at 37 degrees C. High survival was shown under two of three conditions (gastric juice, bile, and small intestine juice), defined as main obstacles of the gastrointestinal tract. The critical step was bile exposure. At a concentration of 20%, viability was low, but 0.3% bile (mean concentration in the intestine) did not have a major influence on growth. Viability of P. parvulus 2.6 was significantly decreased in gastric juice at pH 1.5 (with pepsin), but it was not significantly affected at pH 2.5, and was also improved at a lower pH in 20% oat milk. Viability was judged sufficient for colonization at gutlike conditions, qualifying the strain for further probiotic studies.

Spirochaeta aurantia is a free-living saprophytic spirochete that grows easily in simple laboratory media, and thus can be used as a model for the investigation of surface carbohydrate structures in spirochetae, which are normally not available in sufficient amounts. Freeze-substitution electron microscopy indicated the presence of a capsule-like material projecting from the surface of S. aurantia. Extraction of cells gave two major glycolipids, the one with a higher molecular mass glycolipid was designated large glycolipid A (LGLA). LGLA contained small amount of branched and unsaturated O-linked fatty acids, l-rhamnose, l-fucose, d-xylose, d-mannose, d-glucosamine, d-glycero-d-gluco-heptose (DDglcHep), d-glycero-d-manno-heptose (DDHep), and a novel branched tetradeoxydecose monosaccharide, which we proposed to call aurantose (Aur). The carbohydrate structure of LGLA was extremely complex and consisted of the repeating units built of 11 monosaccharides, arrangement of nine of them was determined as: $$\matrix {{\quad \quad \quad \quad \quad {\text{ - [ - 3 - }}\beta {\text{ - DDglcHep - }}3{\text{ - }}\beta {\text{ - D - GlcNAc - 2 - }}\beta {\text{ - D - Man - ] - }}}} \\ {{\quad \quad \quad \quad \quad \quad \quad \quad \quad \quad \quad \quad \quad \quad \quad \quad \quad \quad \quad \quad \quad |}} \\ {{\alpha {\text{ - Aur - 3 - }}\beta {\text{ - L - Rha - 4 - }}\beta {\text{ - D - Xyl - 4 - }}\alpha {\text{ - L - Fuc - 3 - }}\beta {\text{ - DDHep - 4}}}} \\ {{\quad \quad \quad \quad \quad \quad \quad \quad \quad |}} \\ {{\alpha {\text{ - L - Rha - 3}}}} \ $$ which wasdeduced from the NMR and chemical data on the LGLA and its fragments, obtained by various degradations. Tentative position of two remaining sugars is proposed. LGLA was negative for gelation of Limulus amebocyte lysate, did not contain lipid A, and was unable to activate any known Toll-like receptors.

Flagellins from Clostridium botulinum were shown to be post-translationally modified with novel glycan moieties by top-down MS analysis of purified flagellin protein from strains of various toxin serotypes. Detailed analyses of flagellin from two strains of C. botulinum demonstrated that the protein is modified by a novel glycan moiety of mass 417 Da in O-linkage. Bioinformatic analysis of available C. botulinum genomes identified a flagellar glycosylation island containing homologs of genes recently identified in Campylobacter coli that have been shown to be responsible for the biosynthesis of legionaminic acid derivatives. Structural characterization of the carbohydrate moiety was completed utilizing both MS and NMR spectroscopy, and it was shown to be a novel legionaminic acid derivative, 7-acetamido-5-(N-methyl-glutam-4-yl)-amino-3,5,7,9-tetradeoxy-D-glycero-alpha-D-galacto-nonulosonic acid, (alphaLeg5GluNMe7Ac). Electron transfer dissociation MS with and without collision-activated dissociation was utilized to map seven sites of O-linked glycosylation, eliminating the need for chemical derivatization of tryptic peptides prior to analysis. Marker ions for novel glycans, as well as a unique C-terminal flagellin peptide marker ion, were identified in a top-down analysis of the intact protein. These ions have the potential for use in for rapid detection and discrimination of C. botulinum cells, indicating botulinum neurotoxin contamination. This is the first report of glycosylation of Gram-positive flagellar proteins by the 'sialic acid-like' nonulosonate sugar, legionaminic acid.

Next-generation sequencing of the V1-V2 and V3 variable regions of the 16S rRNA gene generated a total of 674,116 reads that described six distinct bacterial biofilm communities from both water meters and pipes. A high degree of reproducibility was demonstrated for the experimental and analytical work-flow by analyzing the communities present in parallel water meters, the rare occurrence of biological replicates within a working drinking water distribution system. The communities observed in water meters from households that did not complain about their drinking water were defined by sequences representing Proteobacteria (82-87%), with 22-40% of all sequences being classified as Sphingomonadaceae. However, a water meter biofilm community from a household with consumer reports of red water and flowing water containing elevated levels of iron and manganese had fewer sequences representing Proteobacteria (44%); only 0.6% of all sequences were classified as Sphingomonadaceae; and, in contrast to the other water meter communities, markedly more sequences represented Nitrospira and Pedomicrobium. The biofilm communities in pipes were distinct from those in water meters, and contained sequences that were identified as Mycobacterium, Nocardia, Desulfovibrio, and Sulfuricurvum. The approach employed in the present study resolved the bacterial diversity present in these biofilm communities as well as the differences that occurred in biofilms within a single distribution system, and suggests that next-generation sequencing of 16S rRNA amplicons can show changes in bacterial biofilm communities associated with different water qualities.

Using restriction endonucleases DraI, AseI, and I-CeuI in conjunction with pulsed-field gel electrophoresis, we have shown that Spirochaeta aurantia M1 possesses a circular 3.98-Mb genome. This is the second largest spirochete chromosome yet analyzed. The observation that the latter enzyme cuts in 3 places suggests the presence of 3 copies of the large subunit (23S) rRNA gene (rrl), which was confirmed by Southern hybridizations. The complete sequence of 2 of the ribosomal RNA operons was determined, revealing that their structure resembled that of the typical member of the bacterial superkingdom: rrs (16S; 1561 bp), tRNA, rrl (23S; 2972 bp), and rrf (5S; 110 bp). The S. aurantia rrs–rrl intergenic regions, as with Treponema denticola, contain genes specifying a 73-nt tRNAAla (anticodon TGC) and a 77-nt tRNAIle (anticodon GAT).Key words: spirochete, pulsed-field gel electrophoresis, ribosomal RNA, operon, Spirochaeta aurantia.

Background Proteolytic Clostridium botulinum is the causative agent of botulism, a severe neuroparalytic illness. Given the severity of botulism, surprisingly little is known of the population structure, biology, phylogeny or evolution of C. botulinum. The recent determination of the genome sequence of C. botulinum has allowed comparative genomic indexing using a DNA microarray. Results Whole genome microarray analysis revealed that 63% of the coding sequences (CDSs) present in reference strain ATCC 3502 were common to all 61 widely-representative strains of proteolytic C. botulinum and the closely related C. sporogenes tested. This indicates a relatively stable genome. There was, however, evidence for recombination and genetic exchange, in particular within the neurotoxin gene and cluster (including transfer of neurotoxin genes to C. sporogenes), and the flagellar glycosylation island (FGI). These two loci appear to have evolved independently from each other, and from the remainder of the genetic complement. A number of strains were atypical; for example, while 10 out of 14 strains that formed type A1 toxin gave almost identical profiles in whole genome, neurotoxin cluster and FGI analyses, the other four strains showed divergent properties. Furthermore, a new neurotoxin sub-type (A5) has been discovered in strains from heroin-associated wound botulism cases. For the first time, differences in glycosylation profiles of the flagella could be linked to differences in the gene content of the FGI. Conclusion Proteolytic C. botulinum has a stable genome backbone containing specific regions of genetic heterogeneity. These include the neurotoxin gene cluster and the FGI, each having evolved independently of each other and the remainder of the genetic complement. Analysis of these genetic components provides a high degree of discrimination of strains of proteolytic C. botulinum, and is suitable for clinical and forensic investigations of botulism outbreaks.

Flagellins from Clostridium botulinum were shown to be post-translationally modified with novel glycan moieties by top-down MS analysis of purified flagellin protein from strains of various toxin serotypes. Detailed analyses of flagellin from two strains of C. botulinum demonstrated that the protein is modified by a novel glycan moiety of mass 417 Da in O-linkage. Bioinformatic analysis of available C. botulinum genomes identified a flagellar glycosylation island containing homologs of genes recently identified in Campylobacter coli that have been shown to be responsible for the biosynthesis of legionaminic acid derivatives. Structural characterization of the carbohydrate moiety was completed utilizing both MS and NMR spectroscopy, and it was shown to be a novel legionaminic acid derivative, 7-acetamido-5-(N-methyl-glutam-4-yl)-amino-3,5,7,9-tetradeoxy-D-glycero-alpha-D-galacto-nonulosonic acid, (alphaLeg5GluNMe7Ac). Electron transfer dissociation MS with and without collision-activated dissociation was utilized to map seven sites of O-linked glycosylation, eliminating the need for chemical derivatization of tryptic peptides prior to analysis. Marker ions for novel glycans, as well as a unique C-terminal flagellin peptide marker ion, were identified in a top-down analysis of the intact protein. These ions have the potential for use in for rapid detection and discrimination of C. botulinum cells, indicating botulinum neurotoxin contamination. This is the first report of glycosylation of Gram-positive flagellar proteins by the 'sialic acid-like' nonulosonate sugar, legionaminic acid.

Clostridium botulinum produces the potent botulinum neurotoxin, the causative agent of botulism. Based on distinctive physiological traits, strains of C. botulinum can be divided into four groups: however, only groups I and II are associated with human illness. Alignment of the flaA gene sequences from 40 group I and 40 group II strains identified a single BsrG1 restriction cut site that was present at base pair 283 in all group II flaA sequences and was not found in any group I sequence. The flaA gene was amplified by rapid colony PCR from 22 group I strains and 18 group II strains and digested with BsrGI restriction enzyme. Standard agarose gel electrophoresis with ethidium bromide staining showed two fragments, following restriction digestion of group II flaA gene amplicons with BsrGI, but only a single band of uncut flaA from group I strains. Combining rapid colony PCR with BsrGI restriction digest of the flaA gene at 60 degrees C is a significant improvement over current methods, such as meat digestion or amplified fragment length polymorphism, as a strain can be identified as either group I or group II in under 5 h when starting with a visible plated C. botulinum colony.

Strains of Clostridium botulinum are traditionally identified by botulinum neurotoxin type; however, identification of an additional target for typing would improve differentiation. Isolation of flagellar filaments and analysis by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) showed that C. botulinum produced multiple flagellin proteins. Nano-liquid chromatography-tandem mass spectrometry (nLC-MS/MS) analysis of in-gel tryptic digests identified peptides in all flagellin bands that matched two homologous tandem flagellin genes identified in the C. botulinum Hall A genome. Designated flaA1 and flaA2 , these open reading frames encode the major structural flagellins of C. botulinum . Colony PCR and sequencing of flaA1/A2 variable regions classified 80 environmental and clinical strains into group I or group II and clustered isolates into 12 flagellar types. Flagellar type was distinct from neurotoxin type, and epidemiologically related isolates clustered together. Sequencing a larger PCR product, obtained during amplification of flaA1/A2 from type E strain Bennett identified a second flagellin gene, flaB . LC-MS analysis confirmed that flaB encoded a large type E-specific flagellin protein, and the predicted molecular mass for FlaB matched that observed by SDS-PAGE. In contrast, the molecular mass of FlaA was 2 to 12 kDa larger than the mass predicted by the flaA1/A2 sequence of a given strain, suggesting that FlaA is posttranslationally modified. While identification of FlaB, and the observation by SDS-PAGE of different masses of the FlaA proteins, showed the flagellin proteins of C. botulinum to be diverse, the presence of the flaA1/A2 gene in all strains examined facilitates single locus sequence typing of C. botulinum using the flagellin variable region.

In an attempt to isolate lipopolysaccharide from Spirochaeta aurantia, Darveau-Hancock extraction of the cell mass was performed. While no lipopolysaccharide was found, two carbohydrate-containing compounds were detected. They were resolved by size-exclusion chromatography into high molecular mass (LGLA) and low molecular mass (LGLB) fractions. Here we present the results of the analysis of the glycolipid LGLB. Deacylation of LGLB with hydrazine and separation of the products by using anion-exchange chromatography gave two major products. Their structure was determined by using chemical methods, NMR and mass spectrometry. All monosaccharides had the D-configuration, and aspartic acid had the L-configuration. Intact LGLB contained two fatty groups at O-2 and O-3 of the glycerol residue. Nonhydroxylated C14 to C18 fatty acids were identified, which were predominantly unsaturated or branched. LGLB was able to gel Limulus amebocyte lysate, albeit at a lower level than that observed for Escherichia coli O113 lipopolysaccharide. However, even large amounts of LGLB were unable to stimulate any Toll-like receptor (TLR) examined, including TLR4 and TLR2, previously shown to be sensitive to lipopolysaccharide and glycolipids from diverse bacterial origins, including other spirochetes.

Several nalB -type multidrug-resistant mutants of Pseudomonas aeruginosa overexpressed MexAB-OprM and carried mutations in the local regulatory gene, mexR . Others, dubbed nalC types, carried mutations elsewhere and overexpressed MexAB-OprM less extensively than the nalB strains. Available evidence showed that MexR acted solely as repressor. Disruption of the mexR gene at various places suggested that the 5′ end of mexR may be a part of the mexAB-oprM promoter.