Search

The purpose of the study is to evaluate the survival rate of pterygoid implants compared to implants placed in different maxilla area and to settle as an alternative solution for the rehabilitation of the posterior maxilla atrophy. Studies that were included for this systematic review were selected using different database of references: PubMed Medline, Lilacs and Cochrane Library. Other journal platforms were also used for the research. Five articles met the strict inclusion/exclusion criteria of the 180 articles founded. This systematic review was registered on Prospero (CRD42023409706) and followed PRISMA statement. A total of 768 implants placed presented 97.43 % with a peak of 100 % of survival rate. Follow-up period varies from a minimum of 1 year to a maximum of six years. Pterygoid implants could be a valid alternative in patients presenting a posterior maxilla atrophy, but results should be interpreted cautiously due to the difficulty of the surgical technique. Further studies in the future should be taken in consideration to confirm the success rate of pterygoid implants since there is only one prospective RCT, potentially incorporating modern technologies such as guided surgery or navigated surgery could be a solution for the success of pterygoid implants, minimizing the risk and less dependent on the operator., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Masson SAS. All rights reserved.)

Introduction: The aim of this study was to evaluate and compare the clinical efficacy of diode laser and ozone gas in the treatment of dentin hypersensitivity (DHS)., Methods: One hundred thirty-two teeth from 44 patients with moderate DHS were randomized into 3 groups according to a split-mouth design. In the diode laser group, the operator irradiated the superficial dentin exposed with an 808-nm wavelength and incremental power from 0.2 to 0.6 W with a 20-second interval. In the ozone gas group, the operator applied a high dose of ozone (32 g/m 3 ) for 30 seconds using a silicon cup. In the placebo group, no therapy was applied. The dentin sensitivity level was evaluated upon enrollment (T0), immediately after treatment (T1), 3 months post-treatment (T2), and 6 months post-treatment (T3) with a cold air blast challenge and tactile stimuli. The pain severity was quantified according to the visual analogue scale. The Wilcoxon signed rank test was used to scrutinize potential statistical disparities among the treatments. Statistical significance was predetermined at P < .05., Results: A significant decrease of DHS was observed in the ozone gas group and the `diode laser group immediately after treatment and after 3 and 6 months of the therapy. After 6 months from the therapy, the sensitivity values in the teeth treated with ozone gas remained statistically lower than those treated with diode lasers (P < .05)., Conclusions: A laser diode and ozone gas are both efficient as dentin sensitivity treatment. Ozone maintains an invariable effectiveness after 6 months., (Copyright © 2024 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.)

Oral mucositis is a common and debilitating side effect induced by stem cell transplantation that is experienced by cancer patients undergoing chemotherapy or radiation therapy. This condition involves inflammation and ulceration of the oral mucosa, leading to pain, difficulty with eating and speaking, and an increased risk of infections. Mucositis not only compromises the quality of life for cancer patients, but also affects treatment outcomes and may necessitate dose reductions or treatment delays. This scientific article provides a comprehensive overview of mucositis. The purpose of this literature review with a meta-analysis is to evaluate the efficacy of laser therapy in treating post-transplant mucositis. Materials and methods : A search of the literature from 3 May 2023 was carried out on three online databases, PubMed, Scopus, and Web of Science. Only studies that treated patients with laser therapy were considered; only studies with the placebo-treated control group were considered. Review Manager version 5.2.8 (Cochrane Collaboration) was used for the pooled analysis. We measured the std. mean difference between the two groups (laser and placebo). Results : There were 230 papers included in this review. Two hundred twenty-seven were excluded. Furthermore, a manual search was performed. After the search phase, three articles were considered in the study. The overall effect showed differences in the degree of mucositis in the laser-treated patients compared with the placebo group. The meta-analysis shows a reduction in the degree of mucositis in the patients treated with laser therapy (std. mean difference -1.34 [-1.98; -0.98]; C.I. 95%). Conclusions : The application of laser therapy results in decreased severity of oral mucositis from radiation and chemotherapy. Our study shows that the application of low-level laser therapy in the treatment of transplant mucositis has excellent efficacy in relieving the symptoms and severity of mucositis.

Purpose: The aim of this systematic review was to evaluate the effectiveness of the socket shield technique (SST), an innovative surgical method introduced in 2010, for reducing buccal bone plate resorption., Methods: The review was conducted following the PRISMA guidelines. Clinical studies conducted in humans and investigating the SST were searched on PubMed (MEDLINE), Embase, Web of Knowledge, and Google Scholar in November and December 2021. The implant survival rate, percentage of complications, and clinical parameters (marginal bone loss [MBL], pink esthetic score [PES], and buccal bone plate resorption [BBPR]) were analyzed using the collected data., Results: The initial search resulted in 132 articles. After article screening, the full texts of 19 studies were read and 17 articles were finally included in the review. In total, 656 implants were installed with the SST. Nine of the 656 implants experienced failure, resulting in an implant survival rate of 98.6%. The percentage of complications was about 3.81%. The analysis of clinical parameters (MBL, PES, and BBPR), showed favorable results for the SST. The mean MBL in implants placed with the SST was 0.39±0.28 mm versus 1.00±0.55 mm in those placed without the SST. PES had a better outcome in the SST group, with an average of 12.08±1.18 versus 10.77±0.74. BBPR had more favorable results in implants placed with the SST (0.32±0.10 mm) than in implants placed with the standard technique (1.05±0.18 mm)., Conclusions: The SST could be considered beneficial for preserving the buccal bone plate. However, since only 7 of the included studies were long-term randomized controlled trials comparing the SST with the standard implant placement technique, the conclusions drawn from this systematic review should be interpreted with caution., Trial Registration: PROSPERO Identifier: CRD42020180637., Competing Interests: No potential conflict of interest relevant to this article was reported., (Copyright © 2023. Korean Academy of Periodontology.)

The aim of this study was to compare three different light-curing-units (LCUs) and determine their effectiveness in the adhesive cementation of indirect composite restorations when a light-curing resin cement is used. Two resin composites were selected: Enamel Plus HRI (Micerium) and AURA (SDI). Three thicknesses (3 mm, 4 mm and 5 mm) were produced and applied as overlays and underlays for each resin composite. A standardized composite layer was placed between underlay and overlay surfaces. Light curing of the resin-based luting composites was attained through the overlay filters using LCUs for different exposure times. All specimens were allocated to experimental groups according to the overlay thickness, curing unit and curing time. Vickers Hardness (VH) notches were carried out on each specimen. Data were statistically evaluated. The curing unit, curing time and overlay thickness were significant factors capable of influencing VH values. The results showed significantly decreased VH values with increasing specimen thickness ( p < 0.05). Significant differences in VH values were found amongst the LCUs for the various exposure times ( p < 0.05). According to the results, a time of cure shorter than 80 s (with a conventional quartz-tungsten-halogen LCU) or shorter than 40 s (with a high-power light-emitting diode (LED) LCU) is not recommended. The only subgroup achieving clinically acceptable VH values after a short 20 s curing time included the 3 mm-thick overlays made out of the AURA composite, when the high-power LED LCU unit was used (VH 51.0). Composite thickness has an intense effect on polymerization. In clinical practice, light-cured resin cements may result in insufficient polymerization for high thickness and inadequate times. High-intensity curing lights can attain the sufficient polymerization of resin cements through overlays in a significantly shorter time than conventional halogen light.

The aim of the present study was to in vitro evaluate the effect of dentin conditioning with hydroabrasion on the microtensile bond strengths of three adhesive systems, compared to the standard etch-and-rinse technique. Sixty extracted human third molars were collected, and their midcoronal occlusal dentin was used for the microtensile bond strength test. Teeth were randomly assigned to three groups according to the adhesive system used: ExciTE F DSC, ENA Bond, and Scotchbond Universal. Specimens from each group were further divided into four subgroups: control specimens were treated with standard adhesive procedures; hydroabraded (HA) specimens were subjected to preventive hydroabrasion with three different intensity levels. After bonding procedures, composite crowns were incrementally built up. After thermocycling, specimens were subsequently sectioned into 1 × 1 mm sticks, and microtensile bond strengths were measured. Data were statistically analyzed. Failure mode analysis was performed. There were no significant differences in terms of bond strength between standard adhesion protocols and adhesion with HA preconditionings. On the other hand, the type of adhesive used had a significant effect on the tensile bond strength. Subgroups treated with hydroabrasion at higher intensity showed a slightly increased frequency of cohesive fractures. In conclusion, hydroabrasion can be used for dentin cavity preparation or finishing, since it does not seem to affect the bonding effectiveness., Competing Interests: The authors declare that they have no conflicts of interest., (Copyright © 2021 Michele Tepedino et al.)

There is currently no consensus on the best way to remove adhesive remnants from teeth following debonding. The main objective of this study is to evaluate and compare the effectiveness of four adhesive resin removal (clean-up) techniques, performed with or without the use of an operative microscope. Forty human teeth were duplicated using an epoxy resin for impregnation. Brackets were bonded to teeth and debonded from teeth. Then, the samples were randomly divided into two equal groups-the naked eye group and the magnification group-and further subdivided into four equal subgroups, in order to compare the different techniques used for the clean-up. Each subgroup was formed of five natural teeth with the respective pre- and post-bonding replicas. Macro- and micro-analysis by means of a stereomicroscope and scanning electron microscopy evaluated, qualitatively and quantitatively, the adhesive remnant index and the damage index of the enamel. Overall, the magnification improved the removal of resins compared to the naked eye ( p < 0.001), and the use of magnification constantly reduced resin residual and surface damage. Enamel damage and adhesive residual from the clean-up procedures represent an ascertained risk in orthodontics. The use of a magnification system improves the quality of debonding and clean-up techniques in a significant way.

The aim of this study was to evaluate the efficiency of bovine and equine bone substitute materials used in sinus augmentation techniques. The research protocol was carried out using the PubMed database, including articles from October 2019 until February 2020 and those in English only. The search on PubMed (MED-LINE) was carried out with the following keywords: sinus augmentation OR sinus lift AND bovine bone graft OR equine bone matrix. The articles identified included randomised clinical trials, cross-sectional studies and case series. Outcomes were the percentage of newly formed bone, remaining graft particles and soft tissue in a follow-up at least of 5 months. The use of bovine bone graft (ABB) as a graft material in maxillary sinus elevation was evaluated in 9 studies. According to the quality assessment, 4 of the 9 studies were analysed and an arithmetic mean was performed showing the following results: newly formed bone (NFB 22.74%), residual grafts (RG 29.36%) and soft tissue percentage (SF 48.51%). The use of equine bone matrix (EBM) was assessed in four different studies including an RCT, a cross-sectional study and two case series; a mean percentage calculated by the extracted data of the four studies was estimated with newly formed bone (NFB 44.51%), residual grafts (RG 17.24%) and soft tissue percentage (SF 36.62%). EBM appears to be as effective as ABB for the maxillary sinus floor augmentation procedure., (Copyright 2019 Biolife Sas. www.biolifesas.org.)

Purpose: The purpose of this cross-sectional study is to evaluate the presence of any correlations between dysfunctions related to visual impairments and dental occlusion., Methods: The test group included 34 subjects (21 males and 13 females; mean age 11 ± 2 years) randomly selected with the following inclusion criteria: absence of any diagnosis for problems at visual level except those related to refractive defects, visual acuity of at least 1.0, absence of any syndrome or malformation in the craniofacial area, good general health, and absence of any systemic disease able to influence the vision or the craniofacial growth. They underwent visual clinical tests to evaluate the presence of fusional vergence defects and amplitude. Each patient underwent an orthodontic clinical exam and the occlusal molar relationship of each subject was recorded and considered as occlusal variable. A statistical analysis with Chi-Squared test was performed in order to analyze the associations between the visual defects and the occlusal variable., Results: A statistically significant association between the molar occlusal relationship and the occurrence of exodeviations was observed. The percentage of subjects presenting fusional amplitudes with convergence lower of the cut-off value was statistically significantly higher in the group of occlusal molar second class., Conclusions: The results obtained show that there is an association between occlusal second molar class and fusional vergence defects.

Background/purpose: This study compared maintenance of canal anatomy, occurrence of apical transportation, and working time observed after instrumentation with One Shape New Generation rotary system (Micro-Mega), with those observed after instrumentation with Reciproc (VDW) and WaveOne (Dentsply-Maillefer) reciprocating systems., Materials and Methods: The mesial canals of 45 mandibular molars (curvature angles between 35° and 45°) were selected. Specimens were randomly divided into three groups, and canal preparations were performed using One Shape, Reciproc, or WaveOne systems (size #25). A digital double radiographic technique was used to determine apical transportation and change in angle of curvature. Also, working time and instrument failures were recorded. Data were statistically analyzed., Results: During preparation, no file fractured. No statistically significant differences were found among groups. No system showed a significantly faster preparation time than others (P > 0.05). All instruments maintained the original canal curvature well and were safe to use., Conclusion: Both continuous rotary instrument and reciprocating systems did not have any influence on the presence of apical transportation or caused an alteration in angle of canal curvature.