Search

Abstract This in vitro study compared various obturation techniques with bioceramic sealers for filling C-shaped 3D-printed replicas. A mandibular molar with a C-shaped root canal with a C1 configuration was obtained. After instrumenting with M3 Pro Gold files (United Dental, Shanghai, China) up to size #30/0.04, a CBCT scan of the tooth was taken. Sixty 3D-printed replicas of the tooth were created. The samples were obturated with EndoSeal TCS sealer (E. TCS; Maruchi, Wonju, Korea) or EndoSeal MTA (E. MTA; Maruchi, Wonju, Korea) (n = 30). The samples in each group were obturated with the following techniques (n = 10): (1) single-cone technique (SC), (2) SC with ultrasonic activation (UA), and (3) cold hydraulic compaction (CHC). Following incubation, the replicas’ apical, middle, and coronal thirds were inspected under a digital microscope, and the proportion of filling material and void were calculated. Also, the obturation time and sealer extrusion were recorded. Data were analyzed using ANOVA, LSD post-hoc, and the chi-square tests (α = 0.05). The results indicated that in the apical third, E. TCS-SC, E. TCS-UA, and E. MTA-UA had the lowest void percentage among groups (p

Çürükle ekspoze matür daimi dişlerin tedavisinde geleneksel kök kanal tedavisine alternatif olarak vital pulpa tedavilerinin uygulanması tartışmalı bir konudur. Diş pulpasının bir kısmının veya tamamının sağlığını korumayı amaçlayan vital pulpa tedavileri minimal müdahale prensibine dayanmaktadır ve indirekt kuafaj, direkt kuafaj, parsiyel pulpotomi ve total pulpotomi prosedürlerini içermektedir. Vital pulpa tedavileri kök kanal tedavisi ile karşılaştırıldığında daha hızlı ve teknik olarak daha az karmaşık olmasıyla birlikte kanal tedavisi sonrası görülebilen renk değişikliği, kök kırığı veya rezidüel periapikal inflamasyon gibi istenmeyen etkiler açısından daha avantajlıdır. Vital pulpa tedavilerinin geleneksel endikasyonları, geri dönüşümlü pulpitis teşhisi konmuş, kök oluşumu tamamlanmış veya henüz tamamlanmamış dişlerin tedavisi ile sınırlı kalmıştır. Bununla birlikte, rejeneratif endodontinin ortaya çıkışı ve invaziv müdahaleyi azaltmayı amaçlayan biyolojik temelli tedavilerin teşviki, çürükle ekspoze pulpanın histopatolojisinin ve iltihaplı pulpanın iyileşme potansiyelinin daha iyi anlaşılması, hidrofilik kalsiyum silikat simanlar gibi yüksek sızdırmazlık yeteneği ve biyoaktif poyansiyeli olan yeni materyallerin geliştirilmesi, vital pulpa tedavilerinin geri dönüşümsüz pulpitise işaret eden belirti ve semptomları olan dişlerde de bir tedavi protokolü olarak benimsenmesini teşvik etmiştir. Bununla birlikte mevcut kanıtların büyük bir bölümü nispeten düşük hasta sayısı içeren çalışmalarla desteklenmektedir. Sonuç olarak daha temsili pulpa teşhis araçlarının geliştirilmesi ve kanıta dayalı yönetim stratejilerinin oluşturabilmesi için bu konuyla ilgili iyi tasarlanmış ileriye dönük araştırmalara olan ihtiyaç devam etmektedir.

Development of bio-mimetic scaffolds with controlled degradation is a key research area in cartilage regeneration. Therefore, novel scaffold composites and favorable techniques to fabricate essential 3D scaffolds are crucial. In this investigation, we achieved controlled biodegradation of composite scaffolds by incorporating calcium silicate (CS) into sodium alginate (SA)/functionalized with multi-walled carbon nanotubes (f-MWCNT). The SA/f-MWCNT and scaffolds with various amounts of CS (5, 10, and 15%) were shown to enhance scaffold properties. We conducted analyses of the composites using X-ray diffraction and scanning electron microscopy. The findings indicated that CS was successfully loaded onto SA/f-MWCNT, and after inclusion the CS crystal structure remained unaltered. We also evaluated the composites using differential scanning calorimetry, and we determined the mechanical strength, swelling, porosity, degradation, and pH properties. The 15% CS-SA/f-MWCNT scaffolds demonstrated improved mechanical properties, controlled degradation and swelling ratio, increased material density, and strengthened bonds that resulted in a more compact structure and better control of porosity. Furthermore, kinetic investigations of the composite scaffolds to potentially absorb water could be accurately modeled using the pseudo-first-order, pseudo-second-order, Elovich, and diffusion kinetic models. The gradual water absorption rate observed in 15% CS-SA/f-MWCNT could be attributed to controlled intraparticle and micropore diffusion. Further biocompatibility studies showed that the scaffold encouraged chondrocyte attachment, spreading, and division. Additionally, collagen deposition and biomineralization of the 15% CS-SA/f-MWCNT scaffolds were slightly higher compared to the SA/f-MWCNT, 5% CS-SA/f-MWCNT, and 10% CS-SA/f-MWCNT scaffolds. The results indicated that the 15% CS-SA/f-MWCNT fabricated scaffolds are the most suitable for cartilage regeneration.

Neutron and x‐ray diffraction measurements have been performed on CaO–MgO–Al2O3–SiO2 (CMAS) glasses doped with NiO–FeXO at room temperature, along with x‐ray measurements on aerodynamically levitated liquids at ≥2000 K. The disordered structures have been modeled using empirical potential structure refinement to investigate the relation between the aluminosilicate network and the modifying cations. The SiO4 and AlO4 tetrahedra are found to have wider Si–O and Al–O bond distance distributions in the glass, and the first Ca–On coordination shell is highly distorted, redistributing different populations of long and short bonds between the liquid and the glass. The addition of Fe and Ni at low aluminosilicate content increases the number of free oxygens not bonded to AlO4 or SiO4. Mg–O and Fe–O are both found to be predominantly fourfold and fivefold in the liquid and glassy states. Despite these low coordination numbers, their bond angle distributions indicate that they are predominantly in nontetrahedral‐type geometries, with ferrous and ferric iron possessing similar coordination environments. The Ca–O and Mg–O average coordination numbers and enthalpies of solution are consistent with their higher reactivity within relatively acidic aluminosilicate melts. [ABSTRACT FROM AUTHOR]

Although the number of implants has increased gradually and consistently over the years to around one million per year globally, there is still far more potential for advancement in the field of dental implantology which is typically growing quickly. This study investigates the effect of nanofiller reinforcement high-performance polymer matrix to enhance mechanical and physical characteristics. Calcium silicate (CS)/Polyetherketoneketone (PEKK) biomedical composite (G0 as a control group) is reinforced with different weight percentages (G1-G4) of tellurium dioxide nanoparticles (TeO2 NPs) (n = 5). This research uses ethanol as a binder for mixing various weight percentages (wt%) of TeO2 NPs with CS/PEKK biomedical composite. The combination is then dried at 120°C in a forced convection oven before being put into special molds and compressed for 20 min Holding period at 310°C and 15 MPa. The composites were prepared via the compression molding technique. Morphological, mechanical, and physical characteristics were studied. The findings of this study suggested improvement in the interfacial interaction between TeO2 NPs (G1 and G2) and CS/PEKK bioactive composite resulting in better mechanical and physical properties, especially at 1 w% of TeO2 NPs (G2). [ABSTRACT FROM AUTHOR]

Hydraulic calcium silicate-based (HCS) sealers have recently gained tremendous popularity due to their unique properties. However, their removal during endodontic retreatment is challenging. The solvent, which could chemically deteriorate the material, would be highly desirable for endodontic retreatment procedures. This preliminary study assessed the interplay and dissolving capability of 10% and 20% citric acid, compared to 17% EDTA, on commonly used HCS sealers (AH Plus Bioceramic Sealer, Bio-C Sealer, BioRoot RCS, TotalFill BC Sealer), and evaluated the potential impact of these solutions on root dentin structure. The interaction between tested sealers and irrigating solutions was photographed, and solubility-related mass changes were determined. The surface morphology of treated filling materials and dentin was evaluated using a scanning electron microscope (SEM). One-way analysis of variance (ANOVA) along with Tukey's test were used to detect the statistically significant differences among groups at the confidence level of 0.95. Intense gas release was observed during the interaction of HCS materials and citric acid, with no evidently visible "bubbling" after the immersion in EDTA. The mass loss of HCS sealers equally confirmed the significantly higher dissolving characteristics of 10% and 20% citric acid solutions compared to EDTA. The surface structural changes, associated with pore and crack formation, were mainly seen for HCS sealers exposed to citric acid. Meanwhile, no severe erosion was detected for dentin after root canal preparation with 10% and 20% citric acid solutions. These findings demonstrate that citric acid has the potential to dissolve HCS sealers with minimal or no negative impact on root dentin, suggesting citric acid as a solvent for HCS sealers in endodontic retreatment procedures. [ABSTRACT FROM AUTHOR]

The present in vitro study focuses on the filling ability of three different bioceramic cements with or without the addition of a bioceramic sealer in an open apex model on the marginal apical adaptation, tubule infiltrations, and void distributions as well as the interface between the cement and the sealer materials. To this end, sixty mandibular premolars were used. MTA-Biorep (BR), Biodentine (BD), and Well-Root Putty (WR) were used to obturate the open apex model with or without the addition of a bioceramic sealer, namely TotalFill® BC sealer™ (TF). A digital optical microscope and scanning electron microscope (SEM) were used to investigate the cement–dentin interface, marginal apical adaptation, and the material infiltration into the dentinal tubules. Micro-computed X-ray tomography and digital optical microscopy were used to investigate the cement–sealer interface. The results were analyzed by using the Kruskal–Wallis test. No significant difference was found between the groups for the marginal apical adaptation quality (p > 0.05). Good adaptation of the dentin–cement interface was found for all tested groups and the sealer was placed between the cement material and dentinal walls. All the groups demonstrated some infiltrations into the dentinal tubules at the coronal part except for the BR group. A good internal interface was found between the cement and the sealer with the presence of voids at the external interface. A larger number of voids were found in the case of the BD-TF group compared to each of the other two groups (p < 0.05). Within the limitations of the present in vitro study, all the groups demonstrated good marginal apical adaptation. The use of a sealer in an open apex does not guarantee good filling and, in addition, creates voids at the external interfaces with the dental walls when the premixed sealer is used with powder–liquid cement systems. The use of a premixed bioceramic cement could offer fewer complications than when a powder–liquid cement system is used. [ABSTRACT FROM AUTHOR]

This study evaluated the remediation effect and stability of palm biochar combined with calcium silicate on lead-cadmium（PbCd）co-contaminated soil, by determining the pH, Pb content, and Cd content in soil solution and edible parts of vegetables in pot experiments. The results demonstrated that compared with the control, addition of a passivation agent could effectively increase the pH value, and substantially reduced the Pb and Cd content in soil solution, and in the edible part of Chinese cabbage by 62.20%–96.77% and 92.76%, respectively. Most of the Pb and Cd contents in the edible part met the National Food Safety Standards（GB 2762—2022）after soil remediation. The results of planting suitability analysis revealed that there were consistent trends of heavy metal concentration in the edible parts and enrichment coefficients of the five tested vegetables. Chinese cabbage and amaranth had the strongest accumulation ability for Pb and Cd, respectively. Soil with Pb<500 mg·kg-1, was more suitable for planting Chinese chives, amaranth, cabbage, and Chinese cabbage; whereas soil with Cd>0.6 mg·kg-1 and/or Pb>500 mg·kg-1, was not suitable for planting any of the five vegetables. This study proves that the continuous remediation effect of the passivator provides technical reference for soil remediation, as well as suggestions for suitable vegetable planting in low-medium pollution risk areas. [ABSTRACT FROM AUTHOR]

Copyright of Acta Odontologica Turcica is the property of Acta Odontologica Turcica and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This study aimed to examine how heating affects the physical properties of a newly developed premixed calcium silicate-containing sealer (AH Plus Bioceramic Sealer; AHB), in comparison with EndoSequence BC Sealer (ES), AH Plus Jet (AH), and Pulp Canal Sealer. The setting time, flow, and film thickness were tested with or without heating at 100 °C for 30 or 60 s, in accordance with ISO6876:2012 standards. Ultrastructural and elemental analyses were performed with scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). Data were analyzed using one-way analysis of variance (ANOVA) with a Tukey post hoc test (α = 0.05). All sealers exhibited significantly shorter setting time and flow after heating at 100 °C for 30 and 60 s (p < 0.05). After heating, AHB showed a significantly higher film thickness compared to that of the other materials (p < 0.05). None of the tested properties of heat-applied AHB and ES met ISO standards, except the setting time in ES. The SEM/EDS results for AHB and ES were not affected by heating. The detected changes in physical properties can negatively impact the performance of premixed calcium silicate-containing sealers, particularly AHB, when warm vertical compaction is employed. [ABSTRACT FROM AUTHOR]

Objectives: This study aimed to investigate the in vitro effects of root canal filling and repair paste (nRoot BP) on human dental pulp stem cells (hDPSCs). Methods: The effects of nRoot BP and iRoot BP Plus on the adhesion, proliferation, migration, and differentiation of hDPSCs were examined in vitro for 72 hours. The adhesion of cells was observed using immunofluorescence rhodamine ghost pen cyclic peptide staining and scanning electron microscopy (SEM). Cell density and changes in migration area were measured under a fluorescence inverted microscope. Fluorescent quantitative PCR was performed to detect genes related to odontogenesis and osteogenesis. Results: Cells adhering to the surfaces of nRoot BP and iRoot BP Plus exhibited similar irregular polygonal morphologies, with cells extending irregular pseudopods to adhere to the materials. CCK-8 results indicated that the density of living cells for nRoot BP and iRoot BP Plus was lower than that of the blank control group at 3 and 5 days of culture. There was no significant difference in cell migration between the groups (P > .05). The migration ability of iRoot BP Plus and nRoot BP was similar to that of the control group. Both nRoot BP and iRoot BP Plus increased the expression of the RUNX2 gene, but there was no significant difference between the groups (P < .05). Furthermore, both nRoot BP and iRoot BP Plus downregulated the expression of the DSPP gene, with no significant difference between them (P > .05). Conclusions: nRoot BP exhibited a slight inhibition of hDPSC proliferation but did not affect the adhesion and migration of hDPSCs. The impact of nRoot BP on the osteogenic and odontogenic differentiation of hDPSCs was similar to that of iRoot BP Plus.

Background and purpose: The use of biomaterials in restorative dentistry is receiving increasing attention. In the treatment of living pulp, calcium silicate-based materials are used, the most common of which are MTA, biodentine, and CEM Cement. The present research aimed to conduct a systematic review to investigate the cytotoxic effect of the mentioned three types of calcium silicate-based cement. Materials and methods: In this review study, English databases, including Pubmed, Scopus, Web of Science, Cochrane, ProQuest, Wiley, and Ovid (All Database included Embase), and all the related articles worldwide from the beginning to February 16, 2023, which were published in English, were retrieved. In this context, studies that investigated the cytotoxicity of three types of calcium silicate-based cement were included. Results: Out of a total of 8,004 articles, 32 articles that met the inclusion criteria were examined. The obtained findings revealed no significant difference between the three materials. Conclusion: The review of the studies indicated that all three biomaterials (MTA, biodentine, and CEM Cement) positively and appropriately affected cell survival. Therefore, using these biomaterials in dental restoration and reconstruction treatments is recommended.

Aim: To evaluate the inflammatory reaction and the ability to induce mineralization activity of a new repair material, NeoPUTTY (NPutty; NuSmile, USA), in comparison with Bio‐C Repair (BC; Angelus, Brazil) and MTA Repair HP (MTA HP; Angelus, Brazil). Methodology: Polyethylene tubes were filled with materials or kept empty (control group, CG) and implanted in subcutaneous tissue of rats for 7, 15, 30, and 60 days (n = 6/group). Capsule thickness, number of inflammatory cells (ICs), fibroblasts, collagen content, and von Kossa analysis were performed. Unstained sections were evaluated under polarized light and by immunohistochemistry for osteocalcin (OCN). Data were submitted to two‐way anova followed by Tukey's test (p ≤.05), except for OCN. OCN data were submitted to Kruskal–Wallis and Dunn and Friedman post hoc tests followed by the Nemenyi test at a significance level of 5%. Results: At 7, 15, and 30 days, thick capsules containing numerous ICs were seen around the materials. At 60 days, a moderate inflammatory reaction was observed for NPutty, BC while MTA HP presented thin capsules with moderate inflammatory cells. In all periods, NPutty specimens contained the highest values of ICs (p <.05). From 7 to 60 days, the number of ICs reduced significantly while an increase in the number of fibroblasts and birefringent collagen content was observed. At 7 and 15 days, no significant difference was observed in the immunoexpression of OCN (p >.05). At 30 and 60 days, NPutty showed the lowest values of OCN (p <.05). At 60 days, a similar immunoexpression was observed for BC and MTA HP (p >.05). In all time intervals, capsules around NPutty, BC, and MTA HP showed von Kossa‐positive and birefringent structures. Conclusions: Despite the greater inflammatory reaction promoted by NeoPutty than BC and MTA HP, the reduction in the thickness of capsules, the increase in the number of fibroblasts, and the reduction in the number of ICs indicate that this bioceramic material is biocompatible Furthermore, NeoPutty presents the ability to induce mineralization activity. [ABSTRACT FROM AUTHOR]

Periodontitis-induced alveolar bone defects necessitate the use of bone grafts for optimal therapeutic outcomes. Therefore, synthetic bone grafts exhibiting consistent properties, sufficient amounts, and multiple application forms have been extensively studied. Our previously designed Ca–Si–Mg cement has demonstrated benefits regarding cell proliferation, osteogenesis, and angiogenesis. Similarly, Sr exhibits osteogenic, anti-osteoclastogenic, and angiogenic properties by influencing several intracellular signaling pathways. In this study, we modified the previously established Ca–Si–Mg cement by incorporating Sr, which resulted in the formation of Mg–Sr-calcium silicate (CS) cement. Furthermore, we evaluated its biocompatibility and efficacy in promoting osteogenesis and angiogenesis. The results revealed that the setting time of the cement was extended with the individual incorporation of either Mg or Sr; notably, the setting time of M5S5 (integrating both Sr and Mg in equal proportions) was 2.7 min shorter than that of M5S0 (integrating only Mg). In addition, the presence of Sr enhanced the mechanical strength to an ultimate strength of 1.89 MPa and reduced the biodegradation rate of the Mg-doped CS cement from a weight loss of 13.9 %–11.5 %. Sr and Mg also demonstrated a synergistic effect on cell proliferation, with no observed cytotoxicity in human periodontal ligament cells (hPDLs). Osteogenic markers such as alkaline phosphate, bone sialoprotein, and osteocalcin were significantly expressed in hPDLs under the combined influence of Mg and Sr on osteogenic activity. Similarly, the angiogenesis-related proteins, vascular endothelial growth factor and angiopoietin-1 exhibited considerable enhancement, indicating the angiogenic capability of M5S5. In summary, our in vitro experiments confirmed that M5S5 is a potential candidate for osteogenic substitutes and alveolar bone regeneration, suggesting its potential applicability in clinical practice. [ABSTRACT FROM AUTHOR]

Calcium silicate ceramics were successfully prepared at various temperatures by spark plasma sintering technique (SPS) using two different compositions, and their morphological and structural characteristics were thoroughly analyzed and compared by scanning electron microscope, X‐ray diffraction, and apparent density measurements. The effect of the sintering method and temperature on microstructural properties has also been studied. The sintered samples prepared by SPS through a heat input of 800°C showed the highest densification as results 800°C was suggested as optimum sintering temperature. Different phases presented in pseudo‐wollastonite, wollastonite, and triclinic Ca3(SiO4)O have been observed in the case of 50C50C with lowest porosity ∼6%$\sim \;6\% $ and highest density 2.6 g/cm3, whereas the composition 10C90S resulted in a fully amorphous material presented in granular microstructure with density of 1.7 g/cm3. [ABSTRACT FROM AUTHOR]

Objective: The study aims to evaluate the effect of a glass ionomer cement (GIC; Fuji 9 Gold Label, GC) with added calcium orthophosphate particles and a calcium silicate cement (CSC; Biodentine, Septodont) regarding ion release, degradation in water, mineral content, and mechanical properties of demineralized dentin samples. Methods: GIC, GIC + 5% DCPD (dicalcium phosphate dihydrate), GIC + 15% DCPD, GIC + 5% β-TCP (tricalcium phosphate), GIC + 15% β-TCP (by mass), and CSC were evaluated for Ca2+/Sr2+/F− release in water for 56 days. Cement mass loss was evaluated after 7-day immersion in water. Partially demineralized dentin disks were kept in contact with materials while immersed in simulated body fluid (SBF) at 37 °C for 56 days. The “mineral-to-matrix ratio” (MMR) was determined by ATR-FTIR spectroscopy. Dentin hardness and elastic modulus were obtained by nanoindentation. Samples were observed under scanning and transmission electron microscopy. Data were analyzed by ANOVA/Tukey test (α = 0.05). Results: Ca2+ release from CSC and GIC (μg/cm2) were 4737.0 ± 735.9 and 13.6 ± 1.6, respectively. In relation to the unmodified GIC, the addition of DCPD or β-TCP increased ion release (p < 0.001). Only the dentin disks in contact with CSC presented higher MMR (p < 0.05) and mechanical properties than those restored with a resin composite used as control (p < 0.05). Mass loss was similar for GIC and CSC; however, the addition of DCPD or β-TCP increased GIC degradation (p < 0.05). Conclusion: Despite the increase in ion release, the additional Ca2+ sources did not impart remineralizing capability to GIC. Both unmodified GIC and CSC showed similar degradation in water. Clinical relevance: CSC was able to promote dentin remineralization. [ABSTRACT FROM AUTHOR]

Salinity is known to have a greater impact on shoot growth than root growth. Na+ buildup in plant tissue under salt stress has been proposed as one of the main issues that causes growth inhibition in crops via ionic imbalances, osmotic stress and pH disturbances. However, the evidence for apoplastic Na+ buildup and the role of silicon in Na+ accumulation at the subcellular level is still enigmatic. The current study focuses on the accumulation of Na+ in the apoplast and symplast of younger and older leaves of two maize varieties (Iqbal as salt-tolerant and Jalal as salt-sensitive) using hydroponic culture along with silicon supplementation under short-term salinity stress. Subcellular ion analysis indicated that silicon nutrition decreased Na+ concentration in both apoplastic washing fluid and symplastic fluid of maize under salt stress. The addition of silicon under NaCl treatment resulted in considerable improvement in fresh biomass, relative water content, chlorophyll content, and concentration of important subcellular ions (i.e., Ca2+, Mg2+, and K+). Knowledge of subcellular ion analysis is essential for solving the mechanisms underlying vital cellular functions e.g. in the current study, the soluble Na+ concentration in the apoplast of older leaves was found to be significantly greater (36.1 mM) in the salt-sensitive variety under NaCl treatment, which was 42.4% higher when compared to the Na+ concentration in the salt-tolerant variety under the same treatment which can influence permeability of cell membrane, signal transduction pathways and provides insights into how ion compartmentalization can contributes to salt tolerance. Calcium silicate enrichment can contribute to increased growth and improved ionic homeostasis by minimizing leaf electrolyte leakage, improving mechanical functions of cell wall and reducing water loss, and improved photosynthetic function. In current investigation, increased water content and intracellular ionic homeostasis along with reduced concentration of Na+ in the maize leaf apoplast suggest that calcium silicate can be used to ameliorate the adverse effects of salt stress and obtain yield using marginal saline lands. [ABSTRACT FROM AUTHOR]

Copyright of Turkiye Klinikleri Journal of Dental Sciences is the property of Turkiye Klinikleri and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The modification in 3D hydrogels, tissue engineering, and biomaterials science has enabled us to fabricate novel substitutes for bone regeneration. This study aimed to combine different biomaterials by 3D technique to fabricate a promising all-rounded hydrogel for bone regeneration. In this study, glycidyl methacrylate (GMA)-modified poly γ-glutamic acid (γ-PGA-GMA) hydrogels with calcium silicate (CS) hydrogel of different concentrations were fabricated by a 3D printing technique, and their biocompatibility and capability in bone regeneration were also evaluated. The results showed that CS γ-PGA-GMA could be successfully fabricated, and the presence of CS enhanced the rheological and mechanical properties of γ-PGA-GMA hydrogels, thus making them more adept at 3D printing and implantations. SEM images of the surface structure showed that higher CS concentrations (5% and 10%) contributed to denser surface architectures, thus achieving improved cellular adhesion and stem cell proliferation. Furthermore, higher concentrations of CS resulted in elevated expressions of osteogenic-related markers such as alkaline phosphatase (ALP) and osteocalcin (OC), as well as enhanced calcium deposition represented by the increased Alizarin Red S staining. In vivo studies referring to critical defects of rabbit femur further showed that the existence of hydrogels alone was able to induce partial bone regeneration, demonstrated by the results from quantitative and qualitative analysis of micro-CT scans. However, CS alterations caused significant increases in bone regeneration, as indicated by micro-CT and histological staining. These results robustly suggest combining different biomaterials is crucial to producing a well-rounded hydrogel for tissue regeneration. We hope this study could be applied as a platform for others to brainstorm potential out-of-the-box solutions, contributing to developing high-potential biomaterials for bone regeneration. [ABSTRACT FROM AUTHOR]

The purpose of this study was to assess the effect of a calcium silicate‐based sealers (CeraSeal) and an epoxy resin‐based sealer (AH Plus) on cytotoxicity and cell migration of stem cell from the human apical papilla (hSCAPs) by using the Alamar Blue, Annexin V‐FICT and wound healing assays. In Alamar Blue assay, hSCAPs exposed to undiluted CeraSeal extract had significantly higher cell viability compared with that observed when cells were treated with AH Plus in all experimental period (p < 0.001). The flow cytometry analysis confirmed the comparison on viable cells and indicated that AH Plus increased apoptosis compared to CeraSeal and the control groups (p < 0.001). Additionally, AH Plus exhibited significantly lower level of cell migration than CeraSeal and the control for up to 48 h observation (p < 0.01). In summary, calcium silicate‐based sealer (CeraSeal) is less cytotoxic and more biocompatible than epoxy resin‐based sealer (AH Plus). [ABSTRACT FROM AUTHOR]

The aim of this study was to evaluate the influence of different activation techniques on dentin tubule penetration of root canal sealer. Seventy‐five teeth with single canals were chemomechanically prepared. A calcium silicate‐based sealer was stained with a fluorescent dye (rhodamine B), placed into the canals and activated according to the following groups: control (no activation), EDDY, EndoActivator, ultrasonic and XP‐Endo Finisher. Then, the samples were obturated. The percentages of sealer penetration at various depth levels of root sections were measured with confocal laser scanning microscopy. XP‐Endo Finisher presented the highest penetration at 50 μm (p < 0.05). XP‐Endo Finisher showed similar penetration with EDDY at 100 and 200 μm (p > 0.05) while presented higher penetration than the other groups (p < 0.05). At 500 μm, XP‐Endo Finisher presented higher penetration than EndoActivator (p < 0.05) while similar penetration with the other groups (p > 0.05). XP‐Endo Finisher can be recommended for activation during sealer placement for better penetration into dentin tubules. [ABSTRACT FROM AUTHOR]

To evaluate the physiochemical properties and apatite-forming ability of a newly prepared nano-tricalcium silicate-58s bioactive glass-based endodontic sealer (C 3 S-BG-P) and compare its results with the Nishika BG canal sealer and BioRoot™ RCS. The physicochemical properties (setting time, flow, solubility, film thickness, and radiopacity) of C 3 S-BG-P, Nishika BG canal sealer, and BioRoot™ RCS were evaluated in accordance with ANSI/ADA 57/2000 (reaffirmed 2012) and ISO 6876:2012 for root canal sealing materials. The in vitro apatite-forming ability was evaluated after 28 days of immersion of disc-shaped specimens in phosphate-buffered saline (PBS) using field emission scanning electron microscopy and energy-dispersive X-ray spectroscopy. The results of physiochemical tests indicated that all the tested sealers complied with the ADA and ISO standards; however, the solubility of the BioRoot did not meet the two standards. C 3 S-BG-P revealed significantly superior properties in all physicochemical tests compared to Nishika and BioRoot; however, the solubility of Nishika was significantly lower than that of C 3 S-BG-P. Furthermore, all tested sealers exhibited apatite precipitation on their surfaces after 28 days of immersion in PBS. C 3 S-BG-P had superior physicochemical properties, which mitigated the disadvantages of calcium silicate-based sealers. Moreover, it exhibited apatite precipitation after immersion in PBS. Further in vivo studies utilizing animal models or clinical studies are necessary to support the rationale of the newly developed sealer for clinical application. [ABSTRACT FROM AUTHOR]

Abstract Pulp treatment is extremely common in endodontics, with the main purpose of eliminating clinical symptoms and preserving tooth physiological function. However, the effect of dental pulp treatment is closely related to the methods and materials used in the process of treatment. Plenty of studies about calcium silicate-based bioceramics which are widely applied in various endodontic operations have been reported because of their significant biocompatibility and bioactivity. Although most of these materials have superior physical and chemical properties, the differences between them can also have an impact on the success rate of different clinical practices. Therefore, this review is focused on the applications of several common calcium silicate-based bioceramics, including Mineral trioxide aggregate (MTA), Biodentine, Bioaggregate, iRoot BP Plus in usual endodontic treatment, such as dental pulp capping, root perforation repair, regenerative endodontic procedures (REPs), apexification, root-end filling and root canal treatment (RCT). Besides, the efficacy of these bioceramics mentioned above in human trials is also compared, which aims to provide clinical guidance for their clinical application in endodontics.

Driven by the urgent need for a solution to tackle the surge of rice husk (RH) and waste frying oil (WFO) waste accumulation at a global scale, this report highlights the use of calcium silicates (CS) extracted from acid-pre-treated rice husk ash (RHA) for free fatty acid (FFA) removal from WFO as conventional RHA shows limited FFA adsorption performance. A novel alkaline earth silicate extraction method from acid-pre-treated RHA was outlined. The structural and behavioural attributes of the synthesised CS were identified through BET, SEM-EDS, and XRD analyses and compared to those of RHA. Notable morphology and structural modification were determined, including reducing specific surface areas, mitigating from amorphous to crystalline structure with regular geometric forms, and detecting Si–O–Ca functional groups exclusive to CS adsorbents. A comparison study showed superior lauric acid (LA) adsorption performance by CS absorbents over acid-pre-treated RHA, with a significant increase from 0.0831 ± 0.0004 mmol LA/g to 2.5808 ± 0.0011 mmol LA/g after 60 min. Recognised as the best-performing CS adsorbent, CS-1.0 was used for further investigations on the effect of dosage, LA concentration, and temperature for efficient LA adsorption, with up to 100% LA removal and 5.6712 ± 0.0016 mmol LA/g adsorption capacity. The adsorption isotherm and kinetic studies showed LA adsorption onto CS-1.0 followed Freundlich isotherm with KF = 0.0598 mmol(1-1/n) L(1/n) g−1 & Qe,cal = 3.1696 mmol g−1 and intraparticle diffusion model with kid = 0.1250 mmol g−1 min0.5 & Ci = 0.9625 mmol g−1, indicating rapid initial adsorption and involvement of carboxylate end of LA and the calcium ions on the CS-1.0 in the rate-limiting step. The high equilibrium adsorption capacity and LA adsorption rate indicated that the proposed CS-1.0 adsorbent has excellent potential to recover FFA from WFO effectively.

Salinity is known to have a greater impact on shoot growth than root growth. Na+ buildup in plant tissue under salt stress has been proposed as one of the main issues that causes growth inhibition in crops via ionic imbalances, osmotic stress and pH disturbances. However, the evidence for apoplastic Na+ buildup and the role of silicon in Na+ accumulation at the subcellular level is still enigmatic. The current study focuses on the accumulation of Na+ in the apoplast and symplast of younger and older leaves of two maize varieties (Iqbal as salt-tolerant and Jalal as salt-sensitive) using hydroponic culture along with silicon supplementation under short-term salinity stress. Subcellular ion analysis indicated that silicon nutrition decreased Na+ concentration in both apoplastic washing fluid and symplastic fluid of maize under salt stress. The addition of silicon under NaCl treatment resulted in considerable improvement in fresh biomass, relative water content, chlorophyll content, and concentration of important subcellular ions (i.e., Ca2+, Mg2+, and K+). Knowledge of subcellular ion analysis is essential for solving the mechanisms underlying vital cellular functions e.g. in the current study, the soluble Na+ concentration in the apoplast of older leaves was found to be significantly greater (36.1 mM) in the salt-sensitive variety under NaCl treatment, which was 42.4% higher when compared to the Na+ concentration in the salt-tolerant variety under the same treatment which can influence permeability of cell membrane, signal transduction pathways and provides insights into how ion compartmentalization can contributes to salt tolerance. Calcium silicate enrichment can contribute to increased growth and improved ionic homeostasis by minimizing leaf electrolyte leakage, improving mechanical functions of cell wall and reducing water loss, and improved photosynthetic function. In current investigation, increased water content and intracellular ionic homeostasis along with reduced concentration of Na+ in the maize leaf apoplast suggest that calcium silicate can be used to ameliorate the adverse effects of salt stress and obtain yield using marginal saline lands.

This study investigates the thermodynamic and mechanical properties of two common calcium silicate phases, xonotlite (Ca6Si6O17(OH)2) and wollastonite (CaSiO3), in high temperature geothermal well cement using first-principles methods. Various properties, including thermal expansion coefficients, elastic constants, free energy, and entropy, were evaluated with the use of accurate anharmonic approximations at high temperatures. The study found that wollastonite has higher mechanical strength (97 GPa) compared to xonotlite (66 GPa) and lower thermal expansion, with decreasing values at higher temperatures. Volumetric thermal expansion coefficients were also calculated at different temperatures. These results demonstrate the potential of wollastonite as a suitable material for high-temperature cement dehydration processes.

Background/purpose: Recently introduced calcium silicate-based bioceramic (CSBC) sealers require moisture for setting, thus this study aimed to compare the setting times of epoxy resin-and CSBC sealers under different test conditions. Materials and methods: Four CSBC sealers (CeraSeal, EndoSeal TCS, One-Fil, and Well-Root ST) were compared to an epoxy resin-based sealer (AH Plus). Each sealer was placed in a stainless-steel and gypsum molds on a glass slide. Sealer samples (n = 10 per group) were stored in an incubator at 95% humidity and 37 °C. A Gilmore needle with a total weight of 100 g and a 2.0-mm diameter were carefully placed vertically against the sealer, and the setting time was recorded when the needle no longer formed an indentation on the sealer surface. Statistical analysis was performed using two-way analysis of variance and Tukey parametric tests. The level of significance was set at 95%. Results: The setting time of all sealers in gypsum molds was significantly shorter than that in stainless-steel molds (P

Abstract Orthopedic implant coatings with optimized surface topography and chemistry can achieve favorable osteogenesis and inflammatory responses. In this work, to take advantage of micro/nano-topography and nutrient element Mg, atmosphere plasma spray and hydrothermal treatment were employed to fabricate two kinds of Mg-incorporated micro/nano-topographical calcium silicate coatings with 0.9 and 15.7 wt% Mg content (Mg1-CS and Mg2-CS). MgSiO3 microspheres composed of nano-flakes were formed on the CS coating surface. We investigated the effects of surface topography and released Mg ion on the protein adsorption and the behaviors of bone mesenchymal stem cells (BMSCs) and RAW264.7 macrophages. Compared with the CS coating, the Mg2-CS coating had 1.8-fold increase in specific surface area, which favored serum protein adsorption and BMSC adhesion. With higher Mg2+ release, the Mg1-CS coating exerted greater effect on enhancing fibronectin adsorption, integrin activation, and osteogenic behaviors of BMSCs. The gene expression profiles showed that the Mg-incorporated CS coatings could modulate macrophage polarization towards M2 phenotype with Mg2-CS showing greater effect. These results showed that the nanostructured Mg-containing surface can promote osteogenic responses and mitigate inflammatory reactions.

This study aimed to examine how heating affects the physical properties of a newly developed premixed calcium silicate-containing sealer (AH Plus Bioceramic Sealer; AHB), in comparison with EndoSequence BC Sealer (ES), AH Plus Jet (AH), and Pulp Canal Sealer. The setting time, flow, and film thickness were tested with or without heating at 100 °C for 30 or 60 s, in accordance with ISO6876:2012 standards. Ultrastructural and elemental analyses were performed with scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). Data were analyzed using one-way analysis of variance (ANOVA) with a Tukey post hoc test (α = 0.05). All sealers exhibited significantly shorter setting time and flow after heating at 100 °C for 30 and 60 s (p < 0.05). After heating, AHB showed a significantly higher film thickness compared to that of the other materials (p < 0.05). None of the tested properties of heat-applied AHB and ES met ISO standards, except the setting time in ES. The SEM/EDS results for AHB and ES were not affected by heating. The detected changes in physical properties can negatively impact the performance of premixed calcium silicate-containing sealers, particularly AHB, when warm vertical compaction is employed.

Hydraulic calcium silicate-based (HCS) sealers have recently gained tremendous popularity due to their unique properties. However, their removal during endodontic retreatment is challenging. The solvent, which could chemically deteriorate the material, would be highly desirable for endodontic retreatment procedures. This preliminary study assessed the interplay and dissolving capability of 10% and 20% citric acid, compared to 17% EDTA, on commonly used HCS sealers (AH Plus Bioceramic Sealer, Bio-C Sealer, BioRoot RCS, TotalFill BC Sealer), and evaluated the potential impact of these solutions on root dentin structure. The interaction between tested sealers and irrigating solutions was photographed, and solubility-related mass changes were determined. The surface morphology of treated filling materials and dentin was evaluated using a scanning electron microscope (SEM). One-way analysis of variance (ANOVA) along with Tukey’s test were used to detect the statistically significant differences among groups at the confidence level of 0.95. Intense gas release was observed during the interaction of HCS materials and citric acid, with no evidently visible “bubbling” after the immersion in EDTA. The mass loss of HCS sealers equally confirmed the significantly higher dissolving characteristics of 10% and 20% citric acid solutions compared to EDTA. The surface structural changes, associated with pore and crack formation, were mainly seen for HCS sealers exposed to citric acid. Meanwhile, no severe erosion was detected for dentin after root canal preparation with 10% and 20% citric acid solutions. These findings demonstrate that citric acid has the potential to dissolve HCS sealers with minimal or no negative impact on root dentin, suggesting citric acid as a solvent for HCS sealers in endodontic retreatment procedures.

Pulp treatment is extremely common in endodontics, with the main purpose of eliminating clinical symptoms and preserving tooth physiological function. However, the effect of dental pulp treatment is closely related to the methods and materials used in the process of treatment. Plenty of studies about calcium silicate-based bioceramics which are widely applied in various endodontic operations have been reported because of their significant biocompatibility and bioactivity. Although most of these materials have superior physical and chemical properties, the differences between them can also have an impact on the success rate of different clinical practices. Therefore, this review is focused on the applications of several common calcium silicate-based bioceramics, including Mineral trioxide aggregate (MTA), Biodentine, Bioaggregate, iRoot BP Plus in usual endodontic treatment, such as dental pulp capping, root perforation repair, regenerative endodontic procedures (REPs), apexification, root-end filling and root canal treatment (RCT). Besides, the efficacy of these bioceramics mentioned above in human trials is also compared, which aims to provide clinical guidance for their clinical application in endodontics. [ABSTRACT FROM AUTHOR]

This study investigates the potential of calcium silicates (CS) synthesised from granite and marble waste as an adsorbent for sustainable waste management. A simple and chemical-free synthesis method was adopted in the preparation of CS. X-ray diffraction, scanning electron microscopy, zeta potential and particle size distribution techniques were used for the characterisation of CS. As Pb(II) and its derivatives from various industrial effluents exercise significant negative impact on the environment and human health, an attempt was made to remove Pb(II) by adsorption process. Batch experiments were conducted to evaluate the feasibility of removal of pb(II) using CS. The zeta potential value of −83.7 mV and the mean particle size of 916 nm for the prepared CS can enhance adsorption process. The analysis of various adsorption kinetic models reveals that pseudo second order kinetic model exhibited a favourable level of agreement with kinetic data (R2 = 0.999). Response surface methodology utilising central composite design was employed to evaluate various process parameters, such as initial Pb(II) concentration, pH, adsorbent dosage and sonication time on adsorption process. Results from 30 experimental runs performed in accordance with model recommendations concluded that the effect of selected parameters with an R2 value of 0.937 was adequate for the current study. In order to assess the goodness of fit and statistical significance of the model’s performance, ANOVA and Lack of Fit (LOF) tests were conducted. The findings show that Pb(II) can be easily removed from the aqueous solutions using CS as an adsorbent under optimal experimental conditions of 100 mg/l Pb(II) initial concentration, 2 g/l adsorbent dosage, pH of 8 and a sonication time of 45 min. [ABSTRACT FROM AUTHOR]

A pot experiment was conducted to investigate the effects of silicon (Si) on morpho-physiological and bio-chemical traits of maize under different irrigation regimes. Experimental treatments comprised of irrigations [60% and 100% of field capacity (FC)], treatments (0, 50, 100, 150, 200 mg kg−1 CaO4Si) and growing stages (GS) [7th (first) and 14th (second) days of water restriction]. 150 mg kg−1 Si increased the growth of maize by inducing transpiration rate (67.56%), water use efficiency (138.36%) and seedling length (19.83%) at first GS whilst enhanced carotenoids (10.95%), total phenolic compounds (45.04%) and decreased proline (7.87%) at the second GS of 60% treatment. In addition, 200 mg kg−1 Si elevated photosynthesis rate (40.54%), total antioxidant activity (12.69%) and decreased proline (52.77%) at the first GS while increased total anthocyanin content (14.99%) during the second GS of 60% application. Silicon had positive impacts on maize under full irrigation conditions too such that 150 mg kg−1 Si reduced transpiration rate (48.43%) and induced total antioxidant activity (39.95%) at first GS while 200 mg kg−1 Si increased water use efficiency by 144.30% at the second GS. In conclusion Si increased drought resistance due to increasing application doses, and on contrary of the literature, Si positively affected many characters at well-watered environment. [ABSTRACT FROM AUTHOR]

We investigated three calcium silicate-based sealers with respect to their chemical characterization, cytotoxicity, and attachment to RAW264.7 cells. BioRoot RCS (BR), Bio-C Sealer (BC), and Sealer Plus BC (SPBC) were assessed using Fourier transform infrared spectroscopy (FTIR), X-ray fluorescence spectroscopy (XRF), and energy-dispersive X-ray spectroscopy (EDX) (n = 4) for elemental characterization, and using scanning electron microscopy (SEM) to evaluate cell morphology and adhesion. Cytotoxicity was determined at different dilutions (1:1, 1:2, and 1:5) using the succinate dehydrogenase activity (MTT assay). Statistical analysis was performed for normal distribution using the Shapiro–Wilk test and for homoscedasticity using Levene's test, and one-way ANOVA, Tukey's/Dunnett's post hoc tests for cell viability and XRF (α = 0.05). Calcium silicate hydrate and calcium hydroxide were detected by FTIR in all groups. EDX detected a higher calcium content for BR and SPBC and aluminum only in the premixed sealers. XRF detected the highest calcium release in BR (p < 0.05). The surface morphology showed irregular precipitates for all the sealers. SPBC at a 1:2 dilution resulted in the lowest cell viability compared to BR (p < 0.05) and BC (p < 0.05). The calcium silicate-based sealers produced a statistically significant reduction in cellular viability at a 1:1 dilution compared to the control group (p < 0.0001). All the sealers maintained viability above 70%. [ABSTRACT FROM AUTHOR]

Whey protein isolate (WPI) hydrogels are attractive biomaterials for application in bone repair and regeneration. However, their main limitation is low mechanical strength. Therefore, to improve these properties, the incorporation of ceramic phases into hydrogel matrices is currently being performed. In this study, novel whey protein isolate/calcium silicate (WPI/CaSiO3) hydrogel biomaterials were prepared with varying concentrations of a ceramic phase (CaSiO3). The aim of this study was to investigate the effect of the introduction of CaSiO3 to a WPI hydrogel matrix on its physicochemical, mechanical, and biological properties. Our Fourier Transform Infrared Spectroscopy results showed that CaSiO3 was successfully incorporated into the WPI hydrogel matrix to create composite biomaterials. Swelling tests indicated that the addition of 5% (w/v) CaSiO3 caused greater swelling compared to biomaterials without CaSiO3 and ultimate compressive strength and strain at break. Cell culture experiments demonstrated that WPI hydrogel biomaterials enriched with CaSiO3 demonstrated superior cytocompatibility in vitro compared to the control hydrogel biomaterials without CaSiO3. Thus, this study revealed that the addition of CaSiO3 to WPI-based hydrogel biomaterials renders them more promising for bone tissue engineering applications. [ABSTRACT FROM AUTHOR]

Critical-size bone defects of complex geometries are challenging to repair, making current approaches less satisfactory. Although calcium silicate (CaS) scaffolds prepared using 3D printing can be promising, these scaffolds are commonly treated with harsh conditions to reinforce their strength, significantly affecting the activity of biomolecules in the scaffolds. In this study, we developed a novel CaS biomaterial ink that did not require harsh post-treatments. It is shown that the printability was significantly improved using polyethylene glycol (PEG) and pluronic F-127 (PF), and the scaffolds showed excellent shape fidelity after printing. Moreover, the scaffolds demonstrated compatible mechanical strength with trabecular bone (∼7.07 MPa vs. 0.6 ∼ 16.8 MPa), and adding teriparatide (TP) in scaffolds could further improve the scaffold's potential for bone tissue engineering. [Display omitted] [ABSTRACT FROM AUTHOR]

Aim: This study aimed to evaluate the volumetric change of root canal sealers through micro‐computed tomographic analysis using a novel in vivo model and to compare the results with those obtained using an ex vivo test. Methodology: Eighteen single‐rooted teeth were cut to 5 mm length from the root apex. The root canals were uniformly enlarged and filled with EndoSequence BC Sealer or AH Plus Jet root canal sealers. Samples were stored at 37°C and 95% relative humidity for 24 h and then scanned with a micro‐CT device. Twelve samples (n = 6 for each sealer) were implanted in the subcutaneous tissue of Wistar rats, while six samples (n = 3 for each sealer) were immersed in 20 mL of phosphate‐buffered saline (PBS) at 37°C at neutral pH. After 7 and 30 days, teeth were removed from subcutaneous tissue or PBS and rescanned. Statistical analysis of volume changes was performed using Shapiro–Wilk's test and independent t‐test (p <.05). Results: AH Plus Jet had smaller volume changes (−2.2 to +0.77%) than EndoSequence BC Sealer (−2.0 to +4.0%) (p <.05), in the two tested models. The volume of the root canal sealers decreased over time (p <.05), in vivo. AH Plus Jet results varied between the in vivo and ex vivo results (p <.05), while EndoSequence BC Sealer presented similar volume losses for both experimental models (p >.05). Conclusion: EndoSequence BC Sealer lost more volume than AH Plus Jet. The experimental conditions influenced the volumetric change of AH Plus Jet but not the EndoSequence BC Sealer. The ex vivo model should be further explored as a methodological alternative to assess the volumetric changes of root canal sealers without causing harm to animals. [ABSTRACT FROM AUTHOR]

This study aims to formulate metronidazole liquid nanocapsules (MTZ LNC) and evaluate their effect on the physicochemical and biological properties of calcium silicate-based bioactive endodontic cements, in vitro. A MTZ LNC suspension was formulated by deposition of the preformed polymer and characterized by laser diffraction and high-performance liquid chromatography (HPLC). Calcium silicate (CS) was mixed with a radiopaque agent (calcium tungstate - CaWO 4), at 10 wt%, to produce the cement powder. Cements liquids were used with two concentrations of MTZ LNC suspension: 0.3 mg/ml and 0.15 mg/ml. Cements prepared with distilled water were used as the control. The radiopacity, setting time, and flow were evaluated following ISO 6876:2012. The compressive strength analysis was conducted according to ISO 9917:2007. pH and mineral deposition were evaluated after immersion in simulated body fluid (SBF). Cell behavior was evaluated by the viability of pre-osteoblastic cells and pulp fibroblasts by SRB and MTT and the antibacterial activity against Enterococcus faecalis was analyzed immediately and after nine months of water storage. MTZ LNCs were formulated with a median diameter of 148 nm and 83.44 % load efficiency. Increased flow and reduced strength were observed for both MTZ LNCs concentrations. The incorporation of MTZ LNCs maintained the ability of cements to increase pH media and promote mineral deposition over the samples, without promoting cytotoxicity. A 2 log 10 reduction in E. faecalis CFU was observed immediately and after nine months in water storage. The formulation of MTZ LNCs allowed the development of antibacterial calcium silicate-based-cements with suitable physicochemical properties and bioactivity, with a reduction in mechanical strength. The 0.3 mg/ml concentration in cements liquid promoted effective and sustainable antibacterial activity. [Display omitted] • Metronidazole liquid nanocapsules (MTZ LNC) were formulated with high-drug load. • MTZ LNC was applied as the liquid for the calcium silicate hydration reaction. • Cements with MTZ LNC addition presented suitable physicochemical behavior. • -Cytotoxicity was limited by the encapsulation of MTZ. • -Antibacterial activity was observed immediately and after 9 months of aging. [ABSTRACT FROM AUTHOR]

In recent years, alternative pulpal therapies targeting dentinogenesis signaling pathways using different peptides have been investigated. The aim of this study was to verify the effectiveness of poly(aspartic acid), pAsp, in dentin regeneration using an animal model. Methods: Mechanical pulp exposure was performed in the upper molars of 56 Wistar rats, randomly divided as follows (n = 14): control (no treatment); MTA group—pulp capping with mineral trioxide aggregate (MTA Angelus); pAsp group—application of 20 μL of pAsp solution (25 mg·mL−1); MTA+pAsp group—application of MTA mixed with pAsp (5:1 by mass). Animals were euthanized after 7 or 21 days. Histological sections were submitted to hematoxylin-eosin and Brown and Brenn staining and immunohistochemical analysis for osteopontin (OPN) and dentin matrix protein 1 (DMP 1). Results: At 7 days, an acute inflammatory infiltrate and the presence of disorganized mineralized tissue were observed in all groups. At 21 days, the quality and thickness of the reparative dentin in treated groups were superior to the control, and bacterial contamination was observed in two MTA-pAsp specimens. While all treated groups showed intense immunostaining for OPN at 21 days, only the pAsp group expressed DMP 1, indicating the presence of fully differentiated odontoblast-like cells. Conclusion: Poly(aspartic) acid promoted dentin regeneration in rat molars in the absence of an additional calcium source and may be an alternative to MTA as a pulp-capping agent. [ABSTRACT FROM AUTHOR]

Calcium silicates with nanosized needle-like structure have been obtained from phosphorite by hydrothermal synthesis. Phosphorus is recovered from phosphorite as sodium phosphate solution under conditions of autoclave treatment of phosphorite with alkaline solution in the presence of silicon dioxide at 250°C. This approach enables involvement of low-phosphorus raw materials into non-waste processing owing to the synthesis of calcium silicates suitable in many branches of industry. Thus prepared phosphate solutions are applicable in agriculture and, after appropriate purification, in food industry. Hydrothermal synthesis conditions have been determined: temperature of 250–300°C, leaching time of 3 h, and NaOH concentration of 150 kg/m3. [ABSTRACT FROM AUTHOR]

This study disclosed the synthesis and characterization of externally and/or internally crosslinked alginate‐gellan gum composite interpenetrating polymer networks (IPN) and IPN hydrogel microspheres for controlled delivery of gliclazid. The internal cross‐linking of the polymer sol was accomplished via slow release of Ca2+ ions from calcium silicate in presence of gluconic acid d‐lactone. The microspheres had spherical shape with smooth surface morphology. The IPN or composite IPN hydrogel microspheres had drug entrapment efficiency of 70%–76%. Incorporation of gellan gum or gellan gum/calcium silicate in the alginate sol sustained the release of drug in simulated gastrointestinal fluids over 12 h without any sign of particle disintegration. Inclusion of calcium silicate in alginate gels was ineffective in controlling drug release under simulated gastrointestinal milieu. The drug release obeyed anomalous diffusion mechanism after inclusion of gellan gum or gellan gum‐calcium silicate in the alginate gel microspheres. Fourier‐transform infrared (FTIR) spectroscopy and zeta analysis confirmed absence of drug‐polymer chemical interaction. The thermal and x‐ray diffraction analyses suggested that the drug transformed into amorphous state after incorporation into composite hydrogel system. Hence, it may be advantageous to combine internal and external gelation procedures for creating composite IPN or IPN hydrogel microspheres for avoiding burst effect of alginate microspheres and managing desired drug release patterns in vitro. [ABSTRACT FROM AUTHOR]

Bioceramic cements used for filling root canals in cases of endo-perio lesion of endodontic origin seem to be promising due to having the potential of promoting faster and more predictable healing of the periapical lesion as they stimulate osteogenesis. An effective treatment plan depends on the precise diagnosis of endo-perio lesions. The origin of an infection, being exclusive to the root canal, from the periodontium, or both, is extremely important for devising the treatment plan. In both cases, no clinical evidence of periodontal disease (bleeding, calculus, etc.) was found; however, primary endodontic lesions with the possibility of drainage through the gingival crevice were present. In addition to the disinfection strategies used during the root canal treatments, the bioceramics Bio C Sealer, Bio C Repair and Bio Root RCS were used to fill in the root canals. Both cases presented an impressive bone gain within 8 months for case 1 and 5 months for case 2. Regarding case 1, in the palatal root canal an apical plug with a bioceramic repair cement was used. Based on the literature studied, it can be concluded that after adequate disinfection of the root canals, using bioceramic cements in filling the root canals shows the potential of supporting capabilities in remineralization of osteolytic lesions in endo-perio diseases. [ABSTRACT FROM AUTHOR]

Objective: The aim of this study was to compare the effect of ultrasonic activation (UA) on tubular penetration between Bio-C Temp and Ultracal XS intracanal medicaments. Methods: Forty single-rooted human premolars were endodontically prepared and divided into 4 experimental groups (n=10): Bio-C Temp, Bio-C Temp+UA, UltraCal XS and UltraCal XS+UA. All medicaments were previously mixed with a specific calcium marker (Fluo-3) and passively injected into the canals. The samples were incubated for 7 days. For each tooth, 1 mm thick sections were obtained from the middle and apical thirds of the canals. The samples were examined by confocal laser scanning microscopy (CLSM) and the depth and area of penetration were determined for each group. The Student t test was used to compare results between groups (p<0.05). Results: UA increased the depth and penetration area of Bio-C Temp and Ultracal XS, showing significant differences in the penetration area of the apical third for Bio-C Temp (p<0.0339). Bio-C Temp presented greater tubular penetration than Ultracal XS, showing significant differences in the depth of penetration in the apical third (p<0.0005), and in the penetration area in the middle (p<0.0016) and apical third (p<0.0339) after UA. Conclusion: UA increases tubular penetration (both depth and area) of Bio-C Temp at the apical third but has no significant effect on Ultracal XS. Bio-C Temp has a greater depth and tubular penetration area than Ultracal XS after UA. [ABSTRACT FROM AUTHOR]

To evaluate the effect of the photodynamic therapy (PDT) using with different photosensitizers on the bond strength of BioRoot RCS (BR) to radicular dentin by comparing with AH Plus (AH). The shaped root canals of 80 human mandibular premolars were divided into four groups based on the final disinfection protocol: NaOCl/EDTA, PDT with methylene Blue (MB), PDT with curcumin (CUR) and PDT with toluidine blue O (TBO) (n = 20). Each group was randomly divided into two subgroups (n = 10), according to the endodontic sealer used for obturation (n = 10). The test of push‐out bond strength (PBS) was performed using an universal test machine. The data were analysed using ANOVA, Tukey post‐hoc, and independent sample t‐test (α = 0.05). MB‐BR group showed the highest PBS at the cervical level (p < 0.05). The selection of the photosensitizer in PDT influenced adhesion of root canal sealers to radicular dentin. [ABSTRACT FROM AUTHOR]

This study assessed the influence of pH variation on the volumetric change of EndoSequence BC Sealer compared to AH Plus Jet. Eighteen single‐rooted teeth were uniformly prepared and filled with one of the sealers. After 24‐h storing, samples were scanned in a micro‐CT device. Then, roots were immersed in 20 ml phosphate‐buffered saline (PBS) with pH of 5, 7 or 12 at 37°C for 7 and 30 days and rescanned. Statistical analysis was performed using Shapiro–Wilk's test, one‐way ANOVA and Tukey's or Student's t‐tests (p < 0.05). Differences between sealers were observed only at neutral pH and after 30 days of acidic pH exposure, with a higher loss of EndoSequence (p < 0.05). After 7 days, alkaline pH reduced and increased the volumetric loss of EndoSequence and AH Plus, respectively, compared to neutral pH (p < 0.05). It can be concluded that the pH directly influenced the volumetric change of both tested root canal sealers in different ways. [ABSTRACT FROM AUTHOR]

The aim of the present study was to compare the physico‐chemical properties of EssenSeal with AH PLUS bioceramic and Pulp Canal Sealer EWT. Flow, solubility, film thickness, radiopacity and setting time were evaluated according to ISO 6876 (2012) specifications. External and cross‐section surface characteristics were analysed under a scanning electron microscope. Statistical analysis was performed using Shapiro–Wilk's test, one‐way ANOVA and the Tukey HSD test. All the sealers conformed to the ISO 6876 (2012) standards, except for the setting time for AH plus bioceramic, which exceeded more than 10% of the time indicated by the manufacturer. Statistically significant differences were found between the three study sealers regarding the physico‐chemical properties tested (p < 0.05). EssenSeal demonstrated characteristics respecting the ISO 6876 (2012) standards and can be considered a predictable alternative in root canal sealing. [ABSTRACT FROM AUTHOR]

Copyright of Anatolian Clinic Journal of Medical Sciences is the property of Hayat Saglik ve Sosyal Hizmetler Vakfi and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

There are still limitations in artificial bone materials used in clinical practice, such as difficulty in repairing large bone defects, the mismatch between the degradation rate and tissue growth, difficulty in vascularization, an inability to address bone defects of various shapes, and risk of infection. To solve these problems, our group designed stereolithography (SLA) 3D-printed calcium silicate artificial bone improved by a calcium sulfate-Cu2+ delivery system. SLA technology endows the scaffold with a three-dimensional tunnel structure to induce cell migration to the center of the bone defect. The calcium sulfate-Cu2+ delivery system was introduced to enhance the osteogenic activity of calcium silicate. Rapid degradation of calcium sulfate (CS) induces early osteogenesis in the three-dimensional tunnel structure. Calcium silicate (CSi) which degrades slowly provides mechanical support and promotes bone formation in bone defect sites for a long time. The gradient degradation of these two components is perfectly matched to the rate of repair in large bone defects. On the other hand, the calcium sulfate delivery system can regularly release Cu2+ in the temporal and spatial dimensions, exerting a long-lasting antimicrobial effect and promoting vascular growth. This powerful 3D-printed calcium silicate artificial bone which has rich osteogenic activity is a promising material for treating large bone defects and has excellent potential for clinical application.