Search

Abstract Background The human immunodeficiency virus type 1 (HIV-1) encodes several regulatory proteins, notably Vpr which influences the survival of the infected cells by causing a G2/M arrest and apoptosis. Such an important role of Vpr in HIV-1 disease progression has fuelled a large number of studies, from its 3D structure to the characterization of specific cellular partners. However, no direct imaging and quantification of Vpr-Vpr interaction in living cells has yet been reported. To address this issue, eGFP- and mCherry proteins were tagged by Vpr, expressed in HeLa cells and their interaction was studied by two photon fluorescence lifetime imaging microscopy and fluorescence correlation spectroscopy. Results Results show that Vpr forms homo-oligomers at or close to the nuclear envelope. Moreover, Vpr dimers and trimers were found in the cytoplasm and in the nucleus. Point mutations in the three α helices of Vpr drastically impaired Vpr oligomerization and localization at the nuclear envelope while point mutations outside the helical regions had no effect. Theoretical structures of Vpr mutants reveal that mutations within the α-helices could perturb the leucine zipper like motifs. The ΔQ44 mutation has the most drastic effect since it likely disrupts the second helix. Finally, all Vpr point mutants caused cell apoptosis suggesting that Vpr-mediated apoptosis functions independently from Vpr oligomerization. Conclusion We report that Vpr oligomerization in HeLa cells relies on the hydrophobic core formed by the three α helices. This oligomerization is required for Vpr localization at the nuclear envelope but not for Vpr-mediated apoptosis. more...

Rare diseases, especially monogenic diseases, which usually affect a single target protein, have attracted growing interest in drug research by encouraging pharmaceutical companies to design and develop therapeutic products to be tested in the clinical arena. Acute intermittent porphyria (AIP) is one of these rare diseases. AIP is characterized by haploinsufficiency in the third enzyme of the heme biosynthesis pathway. Identification of the liver as the target organ and a detailed molecular characterization have enabled the development and approval of several therapies to manage this disease, such as glucose infusions, heme replenishment, and, more recently, an siRNA strategy that aims to down-regulate the key limiting enzyme of heme synthesis. Given the involvement of hepatic hemoproteins in essential metabolic functions, important questions regarding energy supply, antioxidant and detoxifying responses, and glucose homeostasis remain to be elucidated. This review reports recent insights into the pathogenesis of acute attacks and provides an update on emerging treatments aimed at increasing the activity of the deficient enzyme in the liver and restoring the physiological regulation of the pathway. While further studies are needed to optimize gene therapy vectors or large-scale production of liver-targeted PBGD proteins, effective protection of PBGD mRNA against the acute attacks has already been successfully confirmed in mice and large animals, and mRNA transfer technology is being tested in several clinical trials for metabolic diseases. more...

Hsp12 is a small heat shock protein of Saccharomyces cerevisiae upregulated in response to various stresses. Non recombinant Hsp12 has been purified and characterized. Using circular dichroism (CD), Isothermal Titration Calorimetry (ITC) and Differential Scanning Calorimetry (DSC), it has been demonstrated that the native Hsp12 is monomeric and intrinsically disordered (IDP). Hsp12 gains in structure in the presence of specific lipids (PiP 2 ). The helical form binds to liposomes models membrane with high affinity, leading to their rigidification. These results suggest that hydrophobic and ionic interactions are involved. Hsp12 is most likely a membrane chaperone expressed during stresses in Saccharomyces cerevisiae., (Copyright © 2021 Elsevier Inc. All rights reserved.) more...

High-throughput process development is more and more used in chromatography. Limitations are the tools provided by the manufacturers. Here, we describe a method to select ion exchange chromatographic media using a 96-well filter microplate. more...

Mixed mode chromatography resins with salt tolerance, large design space and orthogonal selectivity requires a slightly more complex development than traditional resins. It is important to screen several ligands and several binding and elution conditions. This allows taking full advantage of these resins. High-Throughput Screening (HTS) for Process Development should be done with the help of Design of Experiment (DoE). It could be performed in filter plates or Robocolumns, and assisted by liquid handling automated workstation. Modeling of the results allows the choice of optimal parameters that can then be validated and scaled up. All this leads to a better knowledge and robustness of the purification step., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.) more...

Mixed mode chromatography offers a diversity of ligands, each providing a new selectivity. This allows the design of novel purification processes with reduced column steps. Structure of ligands is based on both hydrophobic and ionic groups. Thanks to its salt tolerance, crude extracts or post-IEX samples can be loaded directly without conditioning. The selectivity could be enhanced by modulating elution parameters or by using additives. More importantly, mixed mode chromatography could be as effective as affinity chromatography for mAb purification processes. Mixed mode chromatography opens the way to short and economical processes., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.) more...

Chromatographic performances are highly influenced by operational parameters. New ion exchangers have tailored matrices providing low backpressure, thereby allowing high flow velocity. By systematic frontal analysis and selectivity determination at different flow rates, we independently evaluated cation exchangers to facilitate media selection and investigated the relationship between surface modification and chromatographic performances. Structure-extended resins showed higher binding capacities compared to resins with conventional ligands directly attached to the matrix. Moreover, they maintained high capacities even with high flow velocities. Ligand accessibility was therefore largely enhanced, allowing proteins to interact and bind under harsh conditions with minimal residence/contact time. High throughput resins can be used for purification of high volume and high concentration feedstock in limited time. This results in higher productivity, and could contribute to cost reduction. In this work, we evaluated the dynamic binding capacities of various new ion exchange resins at different binding conductivities for different residence times, and observed that., (Copyright © 2018 Elsevier B.V. All rights reserved.) more...

Hsp12 is a small heat shock protein produced in many organisms, including the yeast Saccharomyces cerevisiae. It has been described as an indicator of yeast stress rate and has also been linked to the sweetness sensation of wine. To obtain a sufficient amount of protein, we produced and purified Hsp12 without tag in Escherichia coli. A simple fast two-step process was developed using a microplate approach and a design of experiments. A capture step on an anion-exchange salt-tolerant resin was followed by size exclusion chromatography for polishing, leading to a purity of 97%. Thereafter, specific anti-Hsp12 antibodies were obtained by rabbit immunization. An ELISA was developed to quantify Hsp12 in various strains of Saccharomyces cerevisiae. The antibodies showed high specificity and allowed the quantitation of Hsp12 in the yeast. The quantities of Hsp12 measured in the strains differed in direct proportion to the level of expression found in previous studies. more...

Elastin-like polypeptides (ELPs) are biodegradable polymers with interesting physico-chemical properties for biomedical and biotechnological applications. We report herein the recombinant expression of three hydrophobic ELPs (VPGIG)n with variable lengths (n = 20, 40, 60) and sub-ambient transition temperatures. These ELPs were purified from the cytoplasmic soluble fraction of Escherichia coli by inverse transition cycling, and their exact molecular weight was confirmed by various mass spectrometry techniques. Transition temperatures of ELP20, ELP40, and ELP60 were measured at 18.6 °C, 12.4 °C and 11.7 °C, respectively., (Copyright © 2016 Elsevier Inc. All rights reserved.) more...

Elastin-like polypeptides (ELPs) are biodegradable polymers with interesting physico-chemical properties for biomedical and biotechnological applications. The recombinant expression of hydrophobic elastin-like polypeptides is often difficult because they possess low transition temperatures, and therefore form aggregates at sub-ambient temperatures. To circumvent this difficulty, we expressed in Escherichia coli three hydrophobic ELPs (VPGIG)n with variable lengths (n=20, 40, and 60) in fusion with the maltose-binding protein (MBP). Fusion proteins were soluble and yields of purified MBP-ELP ranged between 66 and 127mg/L culture. After digestion of the fusion proteins by enterokinase, the ELP moiety was purified by using inverse transition cycling. The purified fraction containing ELP40 was slightly contaminated by traces of undigested fusion protein. Purification of ELP60 was impaired because of co-purification of the MBP tag during inverse transition cycling. ELP20 was successfully purified to homogeneity, as assessed by gel electrophoresis and mass spectrometry analyses. The transition temperature of ELP20 was measured at 15.4°C in low salt buffer. In conclusion, this method can be used to produce hydrophobic ELP of low molecular mass., (Copyright © 2015 Elsevier Inc. All rights reserved.) more...

An innovative process to purify mAb from CHO cell culture supernatant was developed. This three-step process involved two mixed mode resins and an anion exchange membrane. We used a human IgG mixture to determine the optimal conditions for each purification step. Thereafter, the whole process was evaluated and improved for the purification of a recombinant mAb produced in the supernatant of CHO cells. Once optimized, yield and purity of 88% and 99.9%, respectively were comparable to those obtained in a conventional process based on a capture step using protein A. In addition, aggregates, HCPs and DNA levels in the purified fraction were below regulatory specifications. Then we used mass spectrometry to identify contaminating proteins in the antibody fraction in order to highlight the behavior of HCPs., (Copyright © 2015 Elsevier B.V. All rights reserved.) more...

Hepcidin was first identified as an antimicrobial peptide present in human serum and urine. It was later demonstrated that hepcidin is the long-sought hormone that regulates iron homeostasis in mammals. Recombinant human Hepcidin-25 (Hepc25) was expressed in Pichia pastoris using a modified version of the pPICZαA vector. Hepc25 was then purified by a simple two-step chromatographic process to obtain 1.9 mg of soluble recombinant human Hepc25 per liter of culture at 96% purity. The sequence of Hepc25 and the presence of four disulfide bridges were confirmed by mass spectrometry analyses, and the recombinant Hepc25 exhibited antibacterial activity. This protocol of production and purification is the first step toward the production of human Hepc25 at a greater scale., (Copyright © 2015 Elsevier B.V. All rights reserved.) more...

High-throughput process development is more and more used in chromatography. Limitations are the tools provided by the manufacturers. Here, we describe a method to select chromatographic media for ion-exchange chromatography using a 96-well filter microplate. more...

We evaluated mixed mode chromatography for the capture of recombinant antibodies from CHO cell culture supernatants. We studied PPA HyperCel, HEA HyperCel, MEP HyperCel and Capto adhere resins, which all contain hydrophobic and cationic groups. A microplate approach combined with DoE modeling allowed the exploration of the complex behaviors of these mixed mode resins. Optimal conditions for antibody purification and host cell proteins (HCPs) elimination were determined and then directly up-scaled to laboratory columns. Then we used mass spectrometry to identify the major HCPs potentially coeluted with the antibody. Differences between the four resins in terms of amount, complexity and identity of the HCPs present in the elution fractions were investigated., (Copyright © 2011 Elsevier B.V. All rights reserved.) more...

Liver-expressed antimicrobial peptide 2 (LEAP-2) is a 40-residue cationic peptide originally purified from human blood ultrafiltrate. The native peptide contains two disulfide bonds and is unique regarding its primary structure. Its biological role is not known but a previous study showed that chemically synthesized LEAP-2 exhibited in vitro antimicrobial activities against several Gram-positive bacteria. In order to determine its antimicrobial mode of action, we expressed human recombinant LEAP-2 in Escherichia coli. Circular dichroism spectroscopy and nuclear magnetic resonance analyses showed that the structure of the recombinant peptide was identical to that of the chemically synthesized and oxidized LEAP-2, with two disulfide bonds between Cys residues in relative 1-3 and 2-4 positions. Minimal inhibitory concentration (MIC) of the recombinant human LEAP-2 was determined by a conventional broth dilution assay. It was found to be bactericidal against Bacillus megaterium at a 200microM concentration. Interestingly, the linear LEAP-2 had a greater antimicrobial activity with a MIC value of 12.5microM, which was comparable to that of magainin2. SYTOX Green uptake was used to assess bacterial membrane integrity. Linear LEAP-2 and magainin2 permeabilized B. megaterium membranes with the same efficiency, whereas oxidized LEAP-2 did not induce stain uptake. Binding of the peptides to plasmid DNA was evaluated by gel retardation assays. The DNA-binding efficacy of linear LEAP-2 was three times higher than that of the peptide-containing disulfide bridges. Altogether, these results show that the secondary structure of human LEAP-2 has a profound impact on its antibacterial activity. more...

Chromatographic performances are highly influenced by operational parameters. New ion exchangers have tailored matrices providing low backpressure and allowing high flow velocity. By systematic frontal analysis and selectivity determination at different flow rates, we suggested an independent evaluation of major anion exchangers to facilitate media selection, and investigated the relationship between (i) surface modification and (ii) chromatographic performances. Structure-extended resins showed higher binding capacities compared to resins with conventional ligands directly attached to the matrix. Moreover, they maintained mainly high capacities even with extremely high flow velocities. Ligand accessibility was therefore largely enhanced, allowing proteins to interact and bind under harsh conditions. High throughput resins can be used for purification of high volume and high concentration feedstock in limited time. This results in higher productivity and could contribute to cost reduction. more...

Two mixed-mode resins were evaluated as an alternative to conventional affinity resins for the purification of recombinant proteins fused to maltose-binding protein (MPB). We purified recombinant MBP, MBP-LacZ and MBP-Leap2 from crude Escherichia coli extracts. Mixed-mode resins allowed the efficient purification of MBP-fused proteins. Indeed, the quantity of purified proteins was significantly higher with mixed-mode resins, and their purity was equivalent to that obtained with affinity resins. By using purified MBP, MBP-LacZ and MBP-Leap2, the dynamic binding capacity of mixed-mode resins was 5-fold higher than that of affinity resins. Moreover, the recovery for the three proteins studied was in the 50-60% range for affinity resins, and in the 80-85% range for mixed-mode resins. Mixed-mode resins thus represent a powerful alternative to the classical amylose or dextrin resins for the purification of recombinant proteins fused to maltose-binding protein. more...

Antimicrobial peptides (AMPs) are cationic molecules that are good leads for new antiinfective drugs. To obtain sufficient amounts, recombinant AMPs are generally produced as fusion proteins in Escherichia coli. Fusion partners facilitate purification of recombinant proteins. Fusion proteins are then cleaved by specific proteases, and cationic peptides are purified by size exclusion chromatography or ion exchange chromatography, neither of which is easily applicable to small volumes of diluted peptide samples. We developed a small-scale system that is easily adaptable for high-throughput screening and uses carboxyl magnetic beads to purify a cationic peptide from its fusion partner. more...

The phytopathogenic fungus Botrytis cinerea produces a set of polygalacturonases (PGs) which are involved in the enzymatic degradation of pectin during plant tissue infection. Two polygalacturonases secreted by B. cinerea in seven-day-old liquid culture were purified to apparent homogeneity by chromatography. PG I was an exopolygalacturonase of molecular weight 65 kDa and pI 8.0 and PG II was an endopolygalacturonase of 52 kDa and pI 7.8. Enzymatic activity of PG I and PG II was partially inhibited by 1 mM CaCl2, probably by calcium chelation of polygalacturonic acid, the substrate of the enzyme. more...