Search

Ring-shaped replicative helicases are hexameric and play a key role in cellular DNA replication. Despite their importance, our understanding of the unwinding mechanism of replicative helicases is far from perfect. Bovine papillomavirus E1 is one of the best-known model systems for replicative helicases. E1 is a multifunctional initiator that senses and melts the viral origin and unwinds DNA. Here, we study the unwinding mechanism of E1 at the single-molecule level using magnetic tweezers. The result reveals that E1 as a single hexamer is a poorly processive helicase with a low unwinding rate. Tension on the DNA strands impedes unwinding, indicating that the helicase interacts strongly with both DNA strands at the junction. While investigating the interaction at a high force (26–30 pN), we discovered that E1 encircles dsDNA. By comparing with the E1 construct without a DNA binding domain, we propose two possible encircling modes of E1 during active unwinding.

Superparamagnetic iron oxide nanoparticles are widely used as nanoprobes for magnetic resonance imaging (MRI). In this study, a novel type of cross-linked magnetic nanoparticle was developed in an effort to improve the structural stability of amphiphilic polymer-coated iron oxide nanoparticles. Iron oxide nanocrystals were coated with a cross-linkable amphiphilic graft copolymer, poly(succinimide) grafted with folate-conjugated polyethylene glycol (PEG) and alkyl chains. The tumor-specific targeting ligand, folate, was included to target and detect cancer cells. The hydrophobic portions of the amphiphilic copolymer on the surfaces of the nanoparticles were cross-linked via an aminolysis reaction between the succinimide units and a bifunctional primary amine. The folate-conjugated cross-linked magnetic nanoparticles (F-CLMNPs) were 40 nm in diameter and displayed a low cytotoxicity, even at relatively high concentrations. The F-CLMNPs exhibited highly efficient intracellular uptake into KB cells, which overexpress the folate receptor, as determined by fluorescence microscopy, flow cytometry, and Prussian blue staining. In vivo MR images of a mouse bearing a KB cell tumor displayed a 75% drop in the T2 signal in the tumor tissues within 3 hours. These results indicated that the F-CLMNPs accumulated at the tumor site and were highly effective for tumor detection using in vivo MRI techniques.

Rapid developments in the field of nanoparticles during the last decades have led to its increased application in drug delivery approaches. The advantages of nano-based drug delivery systems include improved therapeutic efficacy of drugs and the reduction of side effects. A plethora of different nanoparticles have been explored as drug carriers for the effective treatment of cancers. Of the various organic/inorganic nanoparticles, polymeric nanoparticles have fulfilled an integral role in the advancement of drug delivery systems by virtue of the ease to incorporate and modify targeting moieties in combination with controlled drug release over prolonged periods. Furthermore, polymeric nanoparticles facilitate theranostic treatment by the incorporation of imaging agents in addition to therapeutics. Recently, stimuli-responsive polymeric nanoparticles emerged as smart drug carriers, in which drug release is affected by physical and/or chemical structural changes induced by a specific stimulus (e.g. pH, temperature, and specific enzymes). The use of these nanocomposites reduces premature drug release and maintains effective drug levels at the pathological target. This review aims to highlight advances in stimuli-triggered drug delivery approaches using polymeric nanoparticles with a focus on pH-sensitive drug- and theranostic delivery systems.

Nanocomposites are widely used to obtain an accurate diagnosis of, and to provide effective therapy for, a number of diseases, because they can be easily formulated by introducing therapeutic agents (e.g., drugs and genes) and imaging agents (e.g., magnetic nanocrystals). Furthermore, nanocomposites can be developed as all-in-one systems, which enable cancer diagnosis and therapy, as well as the simultaneous monitoring of drug behavior. In this protocol, we describe the synthesis of four pyrenyl-based polymers (pyrenyl polyethylene glycol (Py-PEG), pyrenyl dextran (Py-DEX), pyrenyl hyaluronan (Py-HA) and pyrenyl-conjugated heterofunctional PEG (pyrenyl PEG)) and their subsequent use in the preparation of multifunctional nanocomposites for different applications including multimodal imaging, targeted cancer detection and pH-sensitive drug delivery. Notably, these nanocomposites can be used to simultaneously perform multiple tasks--for example, delivering magnetic particles for early cancer detection by MRI, efficient cataloging of patient groups for personalized therapy and real-time monitoring of disease progress. Starting from the synthesis of pyrenyl-based polymers, this protocol can be completed in ∼15 d.

It is highly important to identify influenza viruses rapidly and accurately for the prevention of future pandemic outbreaks. We developed an easy and sensitive influenza virus detection method using surface-enhanced Raman scattering (SERS) antibody probes. The SERS antibody probes can be prepared easily by mixing Au nanoparticles, gold binding peptide-protein G, and antibodies without complicated chemical or biological reactions. They also retain the optimal conformation for the antibody's interaction with Influenza A/CA/07/2009 (pH1N1), allowing us to detect pH1N1 sensitively and selectively. This method provides a detection limit of 4.1 × 103 TCID per mL and is highly selective for pH1N1. We anticipate that this method can be useful in a wide range of immunoassays.

Here, we demonstrate a simple route for preparing of C 60 nano-islands on a flat surface such as a silicon wafer by using spin-coating method. The size of C 60 nano-islands was controlled by varying C 60 concentrations and rotating speeds. Moreover, the molecular structure of the nano-islands changed depending on the annealing temperature. The homogenous formation of C 60 nano-islands was revealed by scanning electron microscopy and atomic force microscopy. A structural change occurred during annealing, and the Raman spectra indicated that this change was dependent on the annealing temperature.

The toxicity of nano-graphene oxide (NGO) on development and angiogenesis was evaluated using zebrafish embryos as in vivo model system. Microinjection of NGO resulted in gross morphological defects in a dose-dependent manner partly due to the induction of apoptosis, whereas coating NGO derivatives with polyethylene glycol (PEG), a biocompatible polymer significantly attenuated its toxicity. NGO also caused abnormal branching and mispatterning of developing trunk blood vessels monitored by endothelial cell-specific fluorescent transgenic zebrafish, presumably via Vascular Endothelial Growth Factor and Notch pathways, key signaling pathways for normal angiogenic process. Interestingly, Alexa568 conjugated, PEG-coated NGO (NGO-A568) still caused angiogenic defects to the similar degree as NGO did, suggesting differential toxic effects of nanomaterials on different developmental processes. Confocal microscopy imaging of NGO- and NGO-A568-injected embryos visualized its live distribution throughout the body including the cranial vasculature. The broader utilization of embryonic zebrafish combined with in vivo , real-time, high-resolution imaging is warranted for assessing the properties of nanomaterials.

Rapid, specific and sensitive detection of pathogenic bacteria is crucial for public health and safety. Bacillus cereus is harmful as it causes foodborne illness and a number of systemic and local infections. We report a novel phage endolysin cell wall-binding domain (CBD) for B. cereus and the development of a highly specific and sensitive surface plasmon resonance (SPR)-based B. cereus detection method using the CBD. The newly discovered CBD from endolysin of PBC1, a B. cereus-specific bacteriophage, provides high specificity and binding capacity to B. cereus. By using the CBD-modified SPR chips, B. cereus can be detected at the range of 10(5)-10(8) CFU/ml. More importantly, the detection limit can be improved to 10(2) CFU/ml by using a subtractive inhibition assay based on the pre-incubation of B. cereus and CBDs, removal of CBD-bound B. cereus, and SPR detection of the unbound CBDs. The present study suggests that the small and genetically engineered CBDs can be promising biological probes for B. cereus. We anticipate that the CBD-based SPR-sensing methods will be useful for the sensitive, selective, and rapid detection of B. cereus.

We developed the photo-crosslinkable hydrogel-based 3D microfluidic device to culture neural stem cells (NSCs) and tumors. The photo-crosslinkable gelatin methacrylate (GelMA) polymer was used as a physical barrier in the microfluidic device and collagen type I gel was employed to culture NSCs in a 3D manner. We demonstrated that the pore size was inversely proportional to concentrations of GelMA hydrogels, showing the pore sizes of 5 and 25 w/v% GelMA hydrogels were 34 and 4 μm, respectively. It also revealed that the morphology of pores in 5 w/v% GelMA hydrogels was elliptical shape, whereas we observed circular-shaped pores in 25 w/v% GelMA hydrogels. To culture NSCs and tumors in the 3D microfluidic device, we investigated the molecular diffusion properties across GelMA hydrogels, indicating that 25 w/v% GelMA hydrogels inhibited the molecular diffusion for 6 days in the 3D microfluidic device. In contrast, the chemicals were diffused in 5 w/v% GelMA hydrogels. Finally, we cultured NSCs and tumors in the hydrogel-based 3D microfluidic device, showing that 53-75% NSCs differentiated into neurons, while tumors were cultured in the collagen gels. Therefore, this photo-crosslinkable hydrogel-based 3D microfluidic culture device could be a potentially powerful tool for regenerative tissue engineering applications.

Copper is indispensable in most aerobic organisms although it is toxic if unregulated as illustrated in many neurodegenerative diseases. To elucidate the mechanisms underlying copper release from cells, a membrane-targeting reporter which can compete with extracellular copper-binding molecules is highly desirable. However, engineering a reporter protein to provide both high sensitivity and selectivity for copper(II) has been challenging, likely due to a lack of proper copper(II)-chelating strategies within proteins. Here, we report a new genetically encoded fluorescent copper(II) reporter by employing a copper-binding tripeptide derived from human serum albumin (HSA), which is one of the major copper-binding proteins in extracellular environments. Optimized insertion of the tripeptide into the green fluorescent protein leads to rapid fluorescence quenching (up to >85% change) upon copper-binding, while other metal ions have no effect. Furthermore, the high binding affinity of the reporter enables reliable copper detection even in the presence of competing biomolecules such as HSA and amyloid beta peptides. We also demonstrate that our reporter proteins can be used to visualize dynamic copper fluctuations on living HeLa cell surfaces.

We report on the targeted imaging of breast cancer using self-assembled levan nanoparticles. Indocyanine green (ICG) was encapsulated in levan nanoparticles via self-assembly. Levan-ICG nanoparticles were found to be successfully accumulated in breast cancer via specific interaction between fructose moieties in levan and overexpressed glucose transporter 5 in breast cancer cells.

In this paper, we report for the first time that graphene oxide (GO) can interact with mutagenic DNA but not intact DNA. After UV-irradiated fluorophore-linked DNA containing thymine repeats was mixed with GO, a decrease in fluorescence was observed in a time-dependent manner. In contrast, no fluorescence change was observed with intact DNA, indicating that UV irradiation of DNA resulted in the formation of mutagenic bases. Because GO is known to act as a fluorescence quencher, the decreased fluorescence implies adsorption of the UV-irradiated DNA onto GO. It appears that the decreased fluorescence might result from the greater accessibility of hydrophobic methyl groups and phenyl rings of thymine dimers to GO and from deformed DNA structures with less effective charge shielding under salt-containing conditions. Using this affinity of GO for mutagenic DNA, we could detect UV-irradiated DNA at concentrations as low as 100 pM. We were also able to analyze the ability of phototoxic drugs to catalyze the formation of mutagens under UV irradiation with GO. Because our method is highly sensitive and feasible and does not require the pretreatment of DNA, we propose that it could accelerate the screening of potential phototoxic drug candidates that would be able to sensitize mutagenic dsDNA.

As various fullerene derivatives have been developed, it is necessary to explore their photophysical properties for potential use in photoelectronics and medicine. Here, we address the photophysical properties of newly synthesized water-soluble fullerene-based nanoparticles and polyhydroxylated fullerene as a representative water-soluble fullerene derivative. They show broad emission band arising from a wide-range of excitation energies. It is attributed to the optical transitions from disorder-induced states, which decay in the nanosecond time range. We determine the kinetic properties of the singlet oxygen ((1)O2) luminescence generated by the fullerene nanoparticles and polyhydroxylated fullerene to consider the potential as photodynamic agents. Triplet state decay of the nanoparticles was longer than (1)O2 lifetime in water. Singlet oxygen quantum yield of a series of the fullerene nanoparticles is comparably higher ranging from 0.15 to 0.2 than that of polyhydroxylated fullerene, which is about 0.06.

The dopamine precursorl-3,4-dihydroxyphenylalanine (l-DOPA) is widely used as a therapeutic choice for the treatment of patients with Parkinson's disease. However, the long-term use ofl-DOPA leads to the development of debilitating involuntary movements, calledl-DOPA-induced dyskinesia (LID). The cAMP/protein kinase A (PKA) signaling in the striatum is known to play a role in LID. However, from among the nine known adenylyl cyclases (ACs) present in the striatum, the AC that mediates LID remains unknown. To address this issue, we prepared an animal model with unilateral 6-hydroxydopamine lesions in the substantia nigra in wild-type and AC5-knock-out (KO) mice, and examined behavioral responses to short-term or long-term treatment withl-DOPA. Compared with the behavioral responses of wild-type mice, LID was profoundly reduced in AC5-KO mice. The behavioral protection of long-term treatment withl-DOPA in AC5-KO mice was preceded by a decrease in the phosphorylation levels of PKA substrates ERK (extracellular signal-regulated kinase) 1/2, MSK1 (mitogen- and stress-activated protein kinase 1), and histone H3, levels of which were all increased in the lesioned striatum of wild-type mice. Consistently, FosB/ΔFosB expression, which was induced by long-terml-DOPA treatment in the lesioned striatum, was also decreased in AC5-KO mice. Moreover, suppression of AC5 in the dorsal striatum with lentivirus-shRNA-AC5 was sufficient to attenuate LID, suggesting that the AC5-regulated signaling cascade in the striatum mediates LID. These results identify the AC5/cAMP system in the dorsal striatum as a therapeutic target for the treatment of LID in patients with Parkinson's disease.

Voltammetric responses associated with the transfer reaction of Cu(II) cations assisted by picolinamide-phenylenevinylene (picolinamide-PV) across a polarized liquid/liquid interface were investigated and their sensing applications were demonstrated. The transfer process characteristics of Cu(II) ions by picolinamide-PV at the water/1,2-dichloroethane (1,2-DCE) interface was first investigated using cyclic voltammetry. The assisted transfer behavior of Cu(II) ions was then compared to that of Cu(I) ions. In order for Cu(II) ion selective sensing applications, a single microhole interface featuring the water and polyvinylchloride-1,6-dichlorohexane (PVC-1,6-DCH) gel layer incorporating picolinamide-PV was fabricated. The sensitivity for Cu(II) ions was improved by the use of differential pulse stripping voltammetry, which preconcentrates Cu(II) ions in the gel layer by means of holding the transfer potential of Cu(II) ions at 800 mV (vs. Ag/AgCl) for 20 s followed by stripping the ions from the gel to the aqueous phase. The Cu(II) ion sensor exhibited a low detectable concentration of 1 μM (0.13 ppm) Cu(II) ions alongside a linear dynamic range of 1 μM (0.13 ppm) to 50 μM (6.72 ppm) Cu(II) cations. An excellent selectivity over Ni 2+ , Ba 2+ and Ca 2+ ions was also achieved.

Poor specificity has been a lingering problem in many microRNA profiling methods, particularly surface hybridization-based methods such as microarrays. Here, we carefully investigated surface hybridization and dissociation processes of a number of sequentially similar microRNAs against nucleic acid capture probes. Single-base mismatched microRNAs were similarly hybridized to a complementary DNA capture probe and thereby poorly discriminated during conventional stringent hybridization. Interestingly, however, mismatched microRNAs showed significantly faster dissociation from the probe than the perfectly matched microRNA. Systematic analysis of various washing conditions clearly demonstrated that extremely high specificity can be obtained by releasing non-specific microRNAs from assay surfaces during a stringent and controlled dissociation step. For instance, compared with stringent hybridization, surface dissociation control provided up to 6-fold better specificity for Let-7a detection than for other Let-7 family microRNAs. In addition, a synthetically introduced single-base mismatch on miR206 was almost completely discriminated by optimized surface dissociation of captured microRNAs, while this mismatch was barely distinguished from target miR206 during stringent hybridization. Furthermore, a single dissociation condition was successfully used to simultaneously measure four different microRNAs with extremely high specificity using melting temperature-equalized capture probes. The present study on selective dissociation of surface bound microRNAs can be easily applied to various hybridization based detection methods for improved specificity.

Gold nanoparticle-conjugated fluorescent hydroxyapatite (AuFHAp) was developed as a smart nanoprobe for measuring alkaline phosphatase (ALP) activity. AuFHAp showed NIR fluorescence due to the hydrolysis of its phosphate groups by ALP. In addition, gold nanoparticles help reduce the nonspecific signal by absorbing nonspecific fluorescence. Through in vitro tests, we confirmed that the AuFHAp probe was capable of detecting ALP levels related to osteoblast activity in living cells with high fluorescence intensity.

We have developed a novel scanometric antibody probe for rapid, sensitive, and naked-eye-visible immunoassays. Using this probe, we clearly demonstrated the successful scanometric detection and identification of influenza A viruses on a microarray. In addition, the sensitivity of the scanometric immunoassay was comparable to that of the fluorescence-based method.

Diagnosis and therapy of early stage liver fibrosis is very important for the treatment of fatal liver diseases. Here, we report on the targeted imaging and therapy of activated hepatic stellate cells (HSCs) and fibrotic liver tissue using N-acetylglucosamine (GlcNAc)- and indocyanine green (ICG)-conjugated PEI/siRNA complexes. The conjugation of a disulfide bond to PEI (PEI-D) was achieved by Michael addition. We modified PEI with N-acetylglucosamine (PEI-D-GlcNAc), which can specifically interact with desmin on activated HSCs, using the EDC coupling method. Confocal microscopic analysis showed that the PEI-D-GlcNAc/siRNA was internalized by HSCs upon interaction with surface desmin. In vitro western blot analysis confirmed that PEI-D-GlcNAc provided strong protein knock-down after transfection with TGFβ1siRNA into HSCs. After a tail vein injection of ICG-conjugated complexes, the PEI-D-GlcNAc-ICG/siRNA complex accumulated to a greater extent in the livers of fibrotic mice than in normal mice over an extended duration. Moreover, immunohistofluorescence analysis confirmed that the PEI-D-GlcNAc-ICG/siRNA complex specifically colocalized with HSCs, which are desmin-positive cells, in fibrotic liver tissues. In vivo TGFβ1siRNA delivery also resulted in superior protein knock-down when using the PEI-D-GlcNAc complex. These results demonstrate that the PEI-D-GlcNAc-ICG/TGFβ1siRNA complex is a useful tool for imaging and treatment of liver fibrosis.

Nanoscopic dense integration between solid-state emission and photochromism provides nanoprobes capable of photoswitching of bright NIR fluorescence with high on/off contrast, bistability and improved signal identification, being suitable for imaging applications in autofluorescence-rich in vivo environments.

We developed the dual-micropillar-based microfluidic platform to direct embryonic stem (ES) cell fate. 4 × 4 dual-micropillar-based microfluidic platform consisted of 16 circular-shaped outer micropillars and 8 saddle-shaped inner micropillars in which single ES cells were cultured. We hypothesized that dual-micropillar arrays would play an important role in controlling the shear stress and cell docking. Circular-shaped outer micropillars minimized the shear stress, whereas saddle-shaped innermicropillars allowed for docking of individual ES cells. We observed the effect of saddle-shaped inner micropillars on cell docking in response to hydrodynamic resistance. We also demonstrated that ES cells cultured for 6 days within the dual-micropillar-based microfluidic platform differentiated into neural-like cells. Therefore, this dual-micropillar-based microfluidic platform could be a potentially powerful method for screening of lineage commitments of single ES cells.

Purpose We determined whether poly(lactic-co-glycolic acid) nanoparticles would be a useful reagent for the successful monitoring of isolated islets by magnetic resonance imaging and optical imaging systems, without clinically relevant toxicity in vitro or in vivo. Methods We used iron oxide for MR imaging and a cyanide dye approved by the Food and Drug Administration (indocyanine green) for optical imaging and estimated the in vivo detection of transplanted pancreatic islets. Results The poly(lactic-co-glycolic acid) nanoparticles were associated with the islets in vitro and were successfully detected by 4.7 T (MR) and optical imaging, without other toxic effects. When labeled islets were transplanted under the mouse kidney capsule, in vivo T2/ -weighted scans with 4.7 T MR detected as few as 300 labeled islets by 4 weeks. Optical in vivo imaging revealed indocyanine green fluorescence by 2 and 4 days after transplantation of islets containing 250 and 500 µg/mL poly(lactic-co-glycolic acid) nanoparticles, respectively. These results were further supported by the immunohistochemical results for insulin and iron in the recipient mouse kidney and pancreas. Conclusions Taken together, these data indicate that poly(lactic-co-glycolic acid) nanoparticles may be used to label transplanted islets and may be imaged with in vivo MR and optical imaging systems. Magn Reson Med 71:1054–1063, 2014. © 2013 Wiley Periodicals, Inc.

The aim of this study was to perform the detection of folate receptor (FR)-positive tumors with a bimodal imaging contrast agent, a perfluorocarbon (PFC)/rhodamine nanoemulsion, providing both 19F-based magnetic resonance imaging (MRI) and fluorescence imaging capabilities. The PFC/rhodamine nanoemulsion was further infused with phospholipid-anchored folate to improve the ability to target FR-expressing tumors. The preferential accumulation of the FR-targeted bimodal nanoemulsion in FR-positive tumor sites was monitored by both 19F-MRI and optical imaging. The FR-targeted PFC nanoemulsion had no significant effect on cell viability, and the size and fluorescence signal of PFC nanoemulsion were very stable. These nanoprobes were successfully delivered into FR-positive tumor xenograft models and showed significantly enhanced signal intensities of 19F-MRI and fluorescence imaging in the tumor area. The folate-PFC/rhodamine nanoemulsion has a great potential to serve as a useful optical and 19F-MRI agent for the diagnosis and targeting of FR-positive tumor.

Hypoxia inducible factor 1α (HIF-1α), an essential transcriptional factor, is negatively regulated by two different types of oxygen and Fe(2+) -dependent HIF hydroxylases, proline hydroxylase (PHD) and factor inhibiting HIF (FIH), under normoxia. Iron chelators have therefore been used for inducing HIF-1α expression by inhibiting the hydroxylases. In this study, the iron chelators displayed differential effects for PHD and FIH in cells depending on their iron specificity and membrane permeability rather than their in vitro potencies. The membrane permeability of the strict Fe(2+) -chelator potentially inhibited both hydroxylases, whereas the membrane impermeable one showed no inhibitory effect in cells. In contrast, the depletion of the extracellular Fe(3+) ion was mainly correlated to PHD inhibition, and the membrane permeable one elicited low efficacy for both enzymes in cells. The 3'-hydroxyl group of quercetin, a natural flavonoid, was critical for inhibition of intracellular hydroxylases. Since the 3'-methylation of quercetin is induced by catechol-O-methyl transferase, the enzyme may regulate the intracellular activity of quercetin. These data suggest that the multiple factors of iron-chelators may be responsible for regulating the intracellular activity HIF hydroxylases.

We developed a colorimetric method to specifically detect single-strand DNA breaks using gold nanoparticles. In our assay, broken DNA cannot stabilize gold nanoparticles to prevent salt-induced aggregation as good as intact DNA can, and this effect can be easily observed with the naked eye as a red-to-purple color change.

Integration of biocompatible silica with a fluorescent polymer (PDDF) and superparamagnetic iron oxide nanoparticles (Fe3 O4 ) to form uniform core-shell nanostructures has the great potential to form particles for use in multimodal bioimaging applications. Core-shell nanoparticles (PDDF/Fe3 O4 @SiO2 ) exhibit fluorescent and magnetic properties that are favorable for their use in magnetic separation and guiding applications, as well as optical and magnetic resonance (MR) imaging capabilities. With the biological analysis in an in vitro intracellular permeation and cytotoxicity test, chemical conjugation of the surface using folic acid (FA) molecules can provide the nanoparticles with cell-targeting properties, localizing the nanoparticles to folate receptors (FRs) on target KB cells that over-express the FRs.

Levan coated cerium oxide nanoparticles (LCNPs) with the enhanced antioxidant activity were successfully synthesized and characterized. Levan and their derivatives are attractive for biomedical applications attributable to their antioxidant, anti-inflammation and anti-tumor properties. LCNPs were synthesized using the one-pot and green synthesis system with levan. For production of nanoparticles, levan plays a role as a stabilizing and reducing agent. Fourier transform infrared spectroscopy (FT-IR) analysis showed that LCNPs successfully synthesized. The morphology and size of nanoparticles were confirmed by transmission electron microscopy (TEM) and dynamic light scattering (DLS). LCNPs have good water solubility and stability. The conjugation of levan with cerium oxide nanoparticles improved antioxidant activity. Moreover the level of ROS was reduced after treatment of LCNPs to H2O2 stimulated NIH3T3 cells. These results demonstrate that the LCNPs are useful for applying of treatment of ROS induced diseases.

This paper demonstrates the development of a novel nanoparticle-enhanced surface plasmon resonance (SPR) sensing platform for the selective and sensitive in situ detection of nickel(II) ions at concentrations as low as 50 parts per trillion (211 pM). An enhancement in selectivity was achieved by designing a surface sandwich assay involving two different ligands each selective toward nickel(II) ions, namely, N-[5-(3'-maleimidopropylamido)-1-carboxypentyl]iminodiacetic acid (NTA) and polyhistidine. Maleimido-modified NTA was first immobilized on an alkanedithiol-modified gold thin film, followed by the sequential adsorption of Ni(II) ions. Next, polyhistidine-functionalized quasispherical gold nanoparticles, designed to enhance the SPR sensitivity, were specifically adsorbed onto surface Ni(II)-NTA complexes. This process was monitored by real-time SPR. The ability to detect Ni(II) ions as low as 50 parts per trillion (ppt) is a remarkable improvement compared to other optical and colorimetric techniques utilizing nanoparticles and is comparable to what can be achieved by state-of-the-art inductively coupled plasma mass spectrometry (ICP-MS). The improved selectivity for Ni(II) ions by the sandwich assay approach was confirmed by comparing measurements involving other divalent cations such as Zn(II), Pb(II), and Cu(II), some of which individually possess binding affinities toward either the NTA or histidine moieties.

The ability of dip-pen nanolithography (DPN) to generate nano- or microarrays of soft or hard materials (e.g., small molecules, DNA, proteins, nanoparticles, sols, and polymers) in a direct-write manner has been widely demonstrated. The transporting of large-sized ink materials such as bacteria, however, remains a significant challenge with this technique. The size limitation of the water meniscus formed between the DPN tip and the solid surface becomes a bottleneck in such diffusion-based molecular transport experiments. Herein, we report a straightforward "stamp-on" DPN method that uses a nanostructured poly(2-methyl-2-oxazoline) hydrogel-coated tip and carrier agents to generate patterns of micrometer-sized Escherichia coli JM 109 bacterial cells. We demonstrate that this approach enables the deposition of a single bacterial cell array on a solid surface or arrays of layers of multiple cells by modulating the viscosity of the "ink" solution. Fluorescence microscopy images indicated that the deposited bacterial cells were kept alive on Luria-Bertani-agar layered solid surfaces after DPN patterning.

Nanoscale drug carriers play an important role in regulating the delivery, permeability, and retention of the drugs. Although various carriers have been used to encapsulate anticancer drugs, natural biomaterials are of great benefit for delivery and controlled release of drugs. We used the electrospray deposition system to synthesize gliadin and gliadin-gelatin composite nanoparticles for delivery and controlled release of an anticancer drug (e.g., cyclophosphamide). The size profile and synthesis of nanoparticles was characterized by dynamic light scattering and X-ray diffractometry. Cyclophosphamide was gradually released from the gliadin nanoparticles for 48 h. In contrast, the gliadin-gelatin composite nanoparticles released cyclophosphamide in a rapid manner. Furthermore, we demonstrated that breast cancer cells cultured with cyclophosphamide-loaded 7% gliadin nanoparticles for 24 h became apoptotic, confirmed by Western blotting analysis. Therefore, the gliadin-based nanoparticle could be a powerful tool for delivery and controlled release of anticancer drugs.

A charge-converting and pH-dependent nanocarrier was achieved by conjugating 2,3-dimethylmaleic anhydride (DMMA) to the amino group of an octadecyl grafted poly (2-hydroxyethyl aspartamide) (PHEA-g-C(18)-NH(2)) backbone, thereby forming a spherical micelle. PHEA, a poly(amino acid)s derivative, was derived from poly(succinimide), which is biocompatible and biodegradable. DMMA, a detachable component at the tumor site, was added, preventing aggregation with negative blood serum and enhancing the nanocarrier's cellular uptake. The polymeric micelle was comprehensively characterized and doxorubicin was encapsulated successively. The cellular uptake and anticancer therapeutic effect were evaluated by flow cytometry, confocal laser scanning microscopy, and a MTT assay. The properties of the nanocarrier can further be exploited to develop an early detection module for cancer. The present work is also expected to advance the study of designing smart carriers for drug and gene delivery.

Because of RNA's ability to encode structure and functional information, researchers have fabricated diverse geometric structures from this polymer at the micro- and nanoscale. With their tunable structures, rigidity, and biocompatibility, novel two-dimensional and three-dimensional RNA structures can serve as a fundamental platform for biomedical applications, including engineered tissues, biosensors, and drug delivery vehicles. The discovery of the potential of small-interfering RNA (siRNA) has underscored the applications of RNA-based micro- and nanostructures in medicine. Small-interfering RNA (siRNA), synthetic double-stranded RNA consisting of approximately 21 base pairs, suppresses problematic target genes in a sequence-specific manner via inherent RNA interference (RNAi) processing. As a result, siRNA offers a potential strategy for treatment of many human diseases. However, due to inefficient delivery to cells and off-target effects, the clinical application of therapeutic siRNA has been very challenging. To address these issues, researchers have studied a variety of nanocarrier systems for siRNA delivery. In this Account, we describe several strategies for efficient siRNA delivery and selective gene silencing. We took advantage of facile chemical conjugation and complementary hybridization to design novel siRNA-based micro- and nanostructures. Using chemical crosslinkers and hydrophobic/hydrophilic polymers at the end of siRNA, we produced various RNA-based structures, including siRNA block copolymers, micelles, linear siRNA homopolymers, and microhydrogels. Because of their increased charge density and flexibility compared with conventional siRNA, these micro- and nanostructures can form polyelectrolyte complexes with poorly charged and biocompatible cationic carriers that are both more condensed and more homogenous than the complexes formed in other carrier systems. In addition, the fabricated siRNA-based structures are linked by cleavable disulfide bonds for facile generation of original siRNA in the cytosol and for target-specific gene silencing. These newly developed siRNA-based structures greatly enhance intracellular uptake and gene silencing both in vitro and in vivo, making them promising biomaterials for siRNA therapeutics.

A variety of fluorescent nanoparticles have been developed for demanding applications such as optical biosensing and fluorescence imaging in live cells. Silica-based fluorescent nanoparticles offer diverse advantages for biological applications. For example, they can be used as labeling probes due to their low toxicity, high sensitivity, resolution, and stability. In this research, a new class of highly fluorescent, efficient nanoparticles composed of a newly synthesized poly[di(2-methoxy-5-(2-ethylhexyloxy))-2,7-(9,9-dioctyl-9 H -fluorene)] (PDDF) core and a silica shell (designated as PDDF@SiO 2 ) were prepared using a simple reverse micelle method, and their fluorescent properties were evaluated using methods such as single-dot photoluminescence measurements. The enhanced photostability of the particles and their potential applications for bioanalysis are discussed in this article. The morphology, size, and fluorescent properties for prepared PDDF@SiO 2 nanoparticles were characterized using transmission electron microscopy (TEM), scanning electron microscopy (SEM) and photoluminescence spectroscopy. The prepared particles size, which was approximately 60 nm, resulted in an excellent colloidal stability in a physiological environment. The photobleaching dynamics, total numbers of emitted photons (TNEP) and statistical measurements of individual nanoparticles were observed using laser scanning fluorescence microscopy to assess the structure and photostability of PDDF@SiO 2 nanoparticles. Additionally, PDDF@SiO 2 nanoparticles were used in cell toxicity and permeation tests for biological analyses, demonstrating a great potential for use as powerful, novel materials within the emerging fields of biosensing and biomedical engineering.

A multiplexed assay technique to measure the photocatalytic activity (PCA) of nanoparticles (NPs) in aqueous suspension was developed based on the observation of TiO(2) NPs-photocatalytic oxidation rate of NADH by monitoring the fluorescence intensities. 96 sample solutions of a small volume (150 μL) could be assayed in a single run without separation of NPs within 15 min. PCA values can be measured with high sensitivity and low experimental uncertainties through the observation at various concentrations of photocatalyst, substrate, aqueous protons and pH buffer ions in a short measurement time.

We introduce the strategic development of self-assembling peptide/protein fragments based on the far-red fluorescent protein mPlum. The first beta strand (mPlum 1, 18 amino acids) of mPlum was engineered to spontaneously bind with the rest of the protein (mPlum 2–11, next 10 beta strands) and to form a native chromophore. The target beta strand mPlum 1 was separated from mPlum 2–11 and linked via a flexible peptide linker, resulting in fluorescently inactive circularly permuted mPlum protein (CpmPlum). In vitro evolution of this CpmPlum to a fluorescently active form and the subsequent splitting of the engineered mPlum 1 peptide afforded self-assembling mPlum fragments. Recombinantly expressed and synthetically prepared beta strand peptides were successfully assembled with the remaining mPlum protein in vitro and in cells. This developed pair of peptide/protein fragments was effectively used for peptide tag detection of alpha-synuclein in mammalian cells. Sequential expression of self-assembling mPlum fragments offered an entirely genetically encoded sensing system of naturally unfolded alpha-synuclein.

A fundamental approach to fabricating a nonstick replica mold with high performance for the manufacturing of high-resolution nanostructures using mold-based lithography is presented. Low-viscosity liquid blends consisting of methacrylate multi-functionalized silsesquioxane (SSQMA), difunctional acrylics, and a small amount of silicone diacrylate (Si-DA) with low surface tension were used as nonstick replica-mold materials. The cured SSQMA/acrylic/Si-DA networks showed a high resistance to organic solvents ( 90% at 365 nm), hydrophobicity (water contact angle >90°), high modulus and wide-range modulus tunability (0.6–4.42 GPa) and small shrinkage (

Recently, new virulent strain of Escherichia coli (E. coli) bacteria (0104:H4) was identified, causing ongoing outbreak of food poisoning in Europe, infecting up to 1,600 people with 18 deaths, especially in Germany. More common strain of E. coli for the hemorrhagic colitis and hemolytic uremic syndrome in human from food poisoning was E. coli O157:H7 (O157). Hence, various diagnostic methods for detecting O157 using staining procedure, PCR after cell lysis, sandwich ELISA, electrochemical biosonsors, and SPR biosensor were developed to expedite the detection time. In this study, our aim was to detect and monitor O157 non-invasively without lysing cells by using its endogenous membrane peroxidase. The genomic analysis revealed that O157 had seven different peroxidases, however, their expression levels, locations, or activities had not been revealed. Various peroxidase substrates for the detection by absorption, fluorescence and luminescence spectroscopies revealed 3,3′,5,5′ Tetramethylbenzidine (TMB), as the best peroxidase substrate against O157. Using TMB, the membrane peroxidase of O157 could be detected in 30 to 60 min with the detection levels of 105 cells/mL, comparable to current ELISA kits. Since TMB is a well-known colorimetric HRP substrate without using sophisticated equipments and procedures, the quantification of O157 with the hand-held portable device could yield compatible detection limit. In future, in conjunction with conjugated anti-O157 antibody on magnetic beads, the present method of using endogenous membrane peroxidases could be further developed to a simple point of care test system to be used in the field.

We describe a method of amplifying the biosensing signal in surface plasmon resonance (SPR)-based immunoassays using an antibody-carbon nanotube (CNT) conjugate. As a model system, human erythropoietin (EPO) and human granulocyte macrophage colony-stimulating factor (GM-CSF) were detected by sandwich-type immunoassays using an SPR biosensor. For the amplification of the SPR signal, the CNT was conjugated with a polyclonal antibody, and then the conjugates were reacted with antibodies coupled with the target proteins. This amplification strategy increases the dynamic range of the immunoassays and enhances the detection sensitivity. The SPR immunoassays, combined with the CNT-assisted signal amplification method, provided a wide dynamic range over four orders of magnitude for both EPO and GM-CSF (0.1-1,000 ng/ml). The CNT amplification method is expected to realize the detection of picogram levels and a wide dynamic detection range of multiple proteins, enabling it to offer a robust analysis tool for the development of biopharmaceutical production.

Real-time monitoring of cellular dynamics in living organisms is highly challenging. We developed a multi-imaging vector based on 2A peptides. Live imaging of subcellular compartments can be performed following the transfection of cells with another vector, the multi-labeling vector, which contains localization signals and various fluorescent protein variants.

A free-radical-polymerizable SSQ/PEG blend with direct patternability has been proposed as an ideal nonfouling material for nanostructure-based biomedical applications. Cured SSQ/PEG networks show an UV transparency of >90% at 365 nm, high resistance to organic/aqueous solutions, hydrophilicity and Young's moduli of 1.898-2.815 GPa. SSQ/PEG patterns with 25-nm linewidths, 25-nm spacing, and an aspect ratio of 4:1 were directly fabricated on transparent substrates by UV embossing, and cured SSQ/PEG networks with long-term stability under chemical, thermal, and biological stress showed strong resistance to the nonspecific adsorption of biomolecules. These characteristics may offer a new strategy for the development of a number of medical nanodevice applications such as labs-on-a-chip.

A novel surface plasmon resonance (SPR) sensing scheme was devised to develop a palm-sized SPR biosensor device. In this system, the beam from a diode laser (as the incident light source) is modulated using a rotating mirror. The reflected light from the gold chip is then captured using a CMOS image sensor, controlled by a notebook PC via a USB interface. This provides a portable POCT SPR sensor device which enables label-free and real-time analyses. This method can also eliminate the deterioration in image quality of the reflected laser light, originating from the coherency of the laser source. The sensing response of the system to the bulk refractive index was calibrated using various concentrations of glycerol solution. As a result, the SPR sensor was able to detect a ∼2.5 × 10−6 RIU change in the refractive index of the solution without implementing any of data processing techniques. The performance of the sensor was tested by monitoring the binding of PSA to its antibody in real-time to verify its potential applicability in analyzing biomolecular interactions. The results obtained from a series of tests confirmed the practicality of the sensor for the on-site detection of a variety of substances in biology, diagnosis, the environment, and defense.

The yapsin family of aspartic proteases, located at cell surface, has a common specificity for paired or single basic reside cleavage sites of proproteins. Our previous study reported that the aberrant proteolytic cleavage of secretory recombinant human parathyroid hormone (hPTH) protein was problematic at late stages of fed-batch cultivations, even in the Saccharomyces cerevisiae mutant strain deficient in yapsin 1 (yps1Delta). To overcome this problem, we constructed a set of S. cerevisiae mutant strains lacking several members of the yapsin family through disruption of the YPS genes coding for yapsin 1, 2, 3, 6, and 7 proteases in various combinations. The multiple YPS-deletion mutant strains did not show detectable growth defects under normal growth conditions, although some of them were hypersensitive to hygromycin B, acid (pH 3.5) and alkali (pH 8.0) conditions. The quintuple disruptant (yps1Deltayps2Deltayps3Deltayps6Deltayps7Delta) was the most efficient in preventing the proteolytic degradation of hPTH in fed-batch cultivations. The present data strongly indicate the involvement of other yapsin members besides Yps1p in the proteolysis of secretory recombinant proteins, particularly under high-density growth conditions.

Solvent-based synthetic methods of fullerene nano/microstructures are known to enhance and utilize unique optical and electrical properties of fullerene structures. Here, we report the systematic synthesis and characterization of various-shaped fullerene microcrystals using alcohols as antisolvents in drowning-out crystallization. The microcrystals are formed in one-, two-, and three-dimensional structures depending on the alcohol type, and the size and shape of the microcrystals are also varied by the C60 concentration and the volume ratio of the solvents. X-ray diffraction patterns demonstrate that the crystalline structures differ from the chain lengths of alcohols. It is suggested that the formation mechanisms are driven by supersaturation related to the C60 solubility in alcohols. This crystallization could allow for production of C60 microcrystals with the desired shape and crystalline structure, leading to potential applications in optoelectronics and photoconducting devices.

The lifetime variations of enhanced cyan fluorescence protein (ECFP) in relatively short integration time bins were studied via time-correlated single photon counting (TCSPC) measurement. We observed that minimum photon counts are necessary for the lifetime estimation to achieve a certain range of variance. The conditions to decrease the variance of lifetime were investigated and the channel width of the measurement of TCSPC data was found to be another important factor for the variance of lifetime. Though the lifetime of ECFP is best fit by a double exponential, a mono exponential fit for the same integration time is more stable. The results may be useful in the analysis of photophysical dynamics for ensemble molecules in short measurement time windows.