Search

Background: 3D printing holds great potential of improving examination, diagnosis and treatment planning as well as interprofessional communication in the field of gynecological oncology. In the current manuscript we evaluated five individualized, patient-specific models of cervical cancer FIGO Stage I-III, created with 3D printing, concerning their value for translational oncology., Methods: Magnetic resonance imaging (MRI) of the pelvis was performed on a 3.0 Tesla MRI, including a T2-weighted isotropic 3D sequence. The MRI images were segmented and transferred to virtual 3D models via a custom-built 3D-model generation pipeline and printed by material extrusion. The 3D models were evaluated by all medical specialties involved in patient care of cervical cancer, namely surgeons, radiologists, pathologists and radiation oncologists. Information was obtained from evaluated profession-specific questionnaires which were filled out after inspecting all five models. The questionnaires included multiple-select questions, questions based on Likert scales (1 = "strongly disagree " or "not at all useful " up to 5 = "strongly agree " or "extremely useful ") and dichotomous questions ("Yes" or "No")., Results: Surgeons rated the models as useful during surgery (4.0 out of 5) and for patient communication (4.7 out of 5). Furthermore, they believed that the models had the potential to revise the patients' treatment plan (3.7 out of 5). Pathologists evaluated with mean ratings of 3.0 out of 5 for the usefulness of the models in diagnostic reporting and macroscopic evaluation. Radiologist acknowledged the possibility of providing additional information compared to imaging alone (3.7 out of 5). Radiation oncologists strongly supported the concept by rating the models highly for understanding patient-specific pathological characteristics (4.3 out of 5), assisting interprofessional communication (mean 4.3 out of 5) and communication with patients (4.7 out of 5). They also found the models useful for improving radiotherapy treatment planning (4.3 out of 5)., Conclusion: The study revealed that the 3D printed models were generally well-received by all medical disciplines, with radiation oncologists showing particularly strong support. Addressing the concerns and tailoring the use of 3D models to the specific needs of each medical speciality will be essential for realizing their full potential in clinical practice., (© 2024. The Author(s).)

Background: Simulation in the field of gynecological pelvic examination with educational purposes holds great potential. In the current manuscript we evaluate a 3D printed model of the female pelvis, which improves practical teaching of the gynecological pelvic examination for medical staff., Methods: We evaluated the benefit of a 3D printed model of the female pelvis (Pelvisio®) as part of a seminar ("skills training") for teaching gynecological examination to medical students. Each student was randomly assigned to Group A or B by picking a ticket from a box. Group A underwent the skills training without the 3D printed model. Group B experienced the same seminar with integration of the model. Both groups evaluated the seminar by answering five questions on Likert scales (1-10, 1 = "very little" or "very poor", 10 equals "very much" or "very good"). Additionally, both groups answered three multiple-choice questions concerning pelvic anatomy (Question 6 to 8). Finally, Group B evaluated the 3D printed model with ten questions (Question 9 to 18, Likert scales, 1-10)., Results: Two of five questions concerning the students' satisfaction with the seminar and their gained knowledge showed statistically significant better ratings in Group B (6.7 vs. 8.2 points and 8.1 vs. 8.9 points (p < 0.001 and p < 0.009). The other three questions showed no statistically significant differences between the traditional teaching setting vs. the 3D printed model (p < 0.411, p < 0.344 and p < 0.215, respectively). The overall mean score of Question 1 to 5 showed 8.4 points for Group B and 7.8 points for Group A (p < 0.001). All three multiple-choice questions, asking about female pelvic anatomy, were answered more often correctly by Group B (p < 0.001, p < 0.008 and p < 0.001, respectively). The mean score from the answers to Questions 9 to 18, only answered by Group B, showed a mean of 8.6 points, indicating, that the students approved of the model., Conclusion: The presented 3D printed model Pelvisio® improves the education of female pelvic anatomy and examination for medical students. Hence, training this pivotal examination can be supported by a custom designed anatomical model tailored for interactive and explorative learning., (© 2022. The Author(s).)

Background: Electrosurgical excisions are common procedures for treating cervical dysplasia and are often seen as minor surgeries. Yet, thorough training of this intervention is required, as there are considerable consequences of inadequate resections, e.g. preterm birth, the risk of recurrence, injuries and many more. Unfortunately, there is a lack of sufficiently validated possibilities of simulating electrosurgeries, which focus on high fidelity and patient safety., Methods: A novel 3D printed simulator for examination and electrosurgical treatment of dysplastic areas of the cervix was compared with a conventional simulator. Sixty medical students experienced a seminar about cervical dysplasia. Group A underwent the seminar with the conventional and Group B with the novel simulator. After a theoretical introduction, the students were randomly assigned by picking a ticket from a box and went on to perform the hands-on training with their respective simulator. Each student first obtained colposcopic examination training. Then he or she performed five electrosurgical excisions (each). This was assessed with a validated score, to visualize their learning curve. Furthermore, adequate and inadequate resections and contacts between electrosurgical loop and vagina or speculum were counted. Both groups also assessed the seminar and their simulator with 18 questions (Likert-scales, 1-10, 1 = strongly agree / very good, 10 = strongly disagree / very bad). Group B additionally assessed the novel simulator with four questions (similar Likert-scales, 1-10)., Results: Nine of 18 questions showed statistically significant differences favoring Group B (p < 0.05). Group B also achieved more adequate R0-resections and less contacts between electrosurgical loop and vagina or speculum. The learning curves of the performed resections favored the novel simulator of Group B without statistically significant differences. The four questions focusing on certain aspects of the novel simulator indicate high appreciation of the students with a mean score of 1.6 points., Conclusion: The presented novel simulator shows several advantages compared to the existing model. Thus, novice gynecologists can be supported with a higher quality of simulation to improve their training and thereby patient safety., (© 2022. The Author(s).)

Background: Pelvic palpation is a core component of every Gynecologic examination. It requires vigorous training, which is difficult due to its intimate nature, leading to a need of simulation. Up until now, there are mainly models available for mere palpation which do not offer adequate visualization of the concerning anatomical structures. In this study we present a 3D printed model of the female pelvis. It can improve both the practical teaching of gynecological pelvic examination for health care professionals and the spatial understanding of the relevant anatomy., Methods: We developed a virtual, simplified model showing selected parts of the female pelvis. 3D printing was used to create a physical model., Results: The life-size 3D printed model has the ability of being physically assembled step by step by its users. Consequently, it improves teaching especially when combining it with commercial phantoms, which are built solely for palpation training. This is achieved by correlating haptic and visual sensations with the resulting feedback received., Conclusion: The presented 3D printed model of the female pelvis can be of aid for visualizing and teaching pelvic anatomy and examination to medical staff. 3D printing provides the possibility of creating, multiplying, adapting and sharing such data worldwide with little investment of resources. Thus, an important contribution to the international medical community can be made for training this challenging examination., (© 2022. The Author(s).)

Purpose: Electrosurgery is the gold-standard procedure for the treatment of cervical dysplasia. The quality of the outcome depends on the accuracy of performance, which underlines the role of adequate training of surgeons, especially, as this procedure is often performed by novice surgeons. According to our knowledge, medical simulation has up until now lacked a model, which focuses on realistically simulating the treatment of cervical dysplasia with the concerning anatomy., Methods and Result: In our work, we present a model created using 3D printing for holistically simulating diagnostic, as well as surgical interventions of the cervix, as realistically as possible., Conclusion: This novel simulator is compared to an existing model and both are evaluated. By doing so, we aim to provide novice gynecologists with standardized and high-quality simulation models for practicing to improve their proficiency., (© 2021. The Author(s).)