Search

With the upcoming of affordable Next-Generation Sequencing technologies, the number of known non-protein coding RNAs increased drastically in recent years. Different types of non-coding RNAs (ncRNAs) emerged as key players in the regulation of gene expression on the RNA–RNA, RNA–DNA as well as RNA–protein level, ranging from involvement in chromatin remodeling and transcription regulation to post-transcriptional modifications. Prediction of ncRNAs involves the use of several bioinformatics tools and can be a daunting task for researchers. This led to the development of analysis pipelines such as UClncR and lncpipe. However, these pipelines are limited to datasets from human, mouse, zebrafish or fruit fly and are not able to analyze RNA sequencing data from other organisms. In this study, we developed the analysis pipeline Pinc (Pipeline for prediction of ncRNA) as an enhanced tool to predict ncRNAs based on sequencing data by removing transcripts that show protein-coding potential. Additionally, a feature for differential expression analysis of annotated genes as well as for identification of novel ncRNAs is implemented. Pinc uses Nextflow as a framework and is built with robust and well-established analysis tools. This will allow researchers to utilize sequencing data from every organism in order to reliably identify ncRNAs.

Abstract The reduction of sugar intake by adults has been stated by the World Health Organization as an important strategy to reduce the risk of non-communicable diseases. Erythritol is a four-carbon sugar alcohol that is considered as a highly suitable substitution for sucrose. This review article covers approaches for the separate stages of the biotechnological production of erythritol from cultivation to the downstream section. The first part focuses on the cultivation stage and compares the yields of erythritol and arising by-products achieved with different types of substrates (commercial versus alternative ones). The reported numbers obtained with the most prominently used microorganisms in different cultivation methods (batch, fed-batch or continuous) are presented. The second part focuses on the downstream section and covers the applied technologies for cell removal, recovery, purification and concentration of erythritol crystals, namely centrifugation, membrane separation, ion and preparative chromatography, crystallization and drying. The final composition of the culture broth and the preparative chromatography separation performance were identified as critical points in the production of a high-purity erythritol fraction with a minimum amount of losses. During the review, the challenges for a biotechnological production of erythritol in a circular economy context are discussed, in particular regarding the usage of sustainable resources and minimizing waste streams. Key points • Substitution of sucrose by erythritol can be a step towards a healthier society • Biotechnological production of erythritol should follow a circular economy concept • Culture broth composition and preparative chromatography are keys for downstreaming • Substrate, mother liquor and nutrients are challenges for circular economy

Abstract The pentose phosphate pathway (PPP) is one of the most targeted pathways in metabolic engineering. This pathway is the primary source of NADPH, and it contributes in fungi to the production of many compounds of interest such as polyols, biofuels, carotenoids, or antibiotics. However, the regulatory mechanisms of the PPP are still not fully known. This review provides an insight into the current comprehension of the PPP in fungi and the limitations of this current understanding. It highlights how this knowledge contributes to targeted engineering of the PPP and thus to better performance of industrially used fungal strains. Key points • Type of carbon and nitrogen source as well as oxidative stress influence the PPP. • A complex network of transcription factors regulates the PPP. • Improved understanding of the PPP will allow to increase yields of bioprocesses.

Determination of the intracellular location of proteins is one of the fundamental tasks of microbiology. Conventionally, label-based microscopy and super-resolution techniques are employed. In this work, we demonstrate a new technique that can determine intracellular protein distribution at nanometer spatial resolution. This method combines nanoscale spatial resolution chemical imaging using the photothermal-induced resonance (PTIR) technique with multivariate modeling to reveal the intracellular distribution of cell components. Here, we demonstrate its viability by imaging the distribution of major cellulases and xylanases in Trichoderma reesei using the colocation of a fluorescent label (enhanced yellow fluorescence protein, EYFP) with the target enzymes to calibrate the chemometric model. The obtained partial least squares model successfully shows the distribution of these proteins inside the cell and opens the door for further studies on protein secretion mechanisms using PTIR.

As photosynthetic microbes, cyanobacteria are attractive hosts for the production of high-value molecules from CO2 and light. Strategies for genetic engineering and tightly controlled gene expression are essential for the biotechnological application of these organisms. Numerous heterologous or native promoter systems were used for constitutive and inducible expression, yet many of them suffer either from leakiness or from a low expression output. Anyway, in recent years, existing systems have been improved and new promoters have been discovered or engineered for cyanobacteria. Moreover, alternative tools and strategies for expression control such as riboswitches, riboregulators or genetic circuits have been developed. In this mini-review, we provide a broad overview on the different tools and approaches for the regulation of gene expression in cyanobacteria and explain their advantages and disadvantages.

Coevolution is an important biological process that shapes interacting species or even proteins – may it be physically interacting proteins or consecutive enzymes in a metabolic pathway. The detection of co-evolved proteins will contribute to a better understanding of biological systems. Previously, we developed a semi-automated method, termed FunOrder, for the detection of co-evolved genes from an input gene or protein set. We demonstrated the usability and applicability of FunOrder by identifying essential genes in biosynthetic gene clusters from different ascomycetes. A major drawback of this original method was the need for a manual assessment, which may create a user bias and prevents a high-throughput application. Here we present a fully automated version of this method termed FunOrder 2.0. To fully automatize the method, we used several mathematical indices to determine the optimal number of clusters in the FunOrder output, and a subsequent k-means clustering based on the first three principal components of a principal component analysis of the FunOrder output. Further, we replaced the BLAST with the DIAMOND tool, which enhanced speed and allows the future integration of larger proteome databases. The introduced changes slightly decreased the sensitivity of this method, which is outweighed by enhanced overall speed and specificity. Additionally, the changes lay the foundation for future high-throughput applications of FunOrder 2.0 in different phyla to solve different biological problems.AUTHOR SUMMARYCoevolution is a process which arises between different species or even different proteins that interact with each other. Any change occurring in one partner must be met by a corresponding change in the other partner to maintain the interaction throughout evolution. These interactions may occur in symbiotic relationships or between rivaling species. Within an organism, consecutive enzymes of metabolic pathways are also subjected to coevolution. We developed a fully automated method, FunOrder 2.0, for the detection of co-evolved proteins, which will contribute to a better understanding of protein interactions within an organism. We demonstrate that this method can be used to identify essential genes of the secondary metabolism of fungi, but FunOrder 2.0 may also be used to detect pathogenicity factors or remains of horizontal gene transfer next to many other biological systems that were shaped by coevolution.

Species of the genus Aureobasidium are ubiquitous, polyextremotolerant, "yeast-like" ascomycetes used for the industrial production of pullulan and other products and as biocontrol agents in agriculture. Their application potential and wide-spread occurrence make Aureobasidium spp. interesting study objects. The availability of a fast and efficient genome editing method is an obvious advantage for future basic and applied research on Aureobasidium. In this study, we describe the development of a CRISPR/Cas9-based genome editing method using ribonucleoproteins (RNPs) in A. pullulans and A. melanogenum. We demonstrate that this method can be used for single and multiplex genome editing using only RNPs by targeting URA3 (encoding for orotidine-5'-phosphate decarboxylase), ADE2 (encoding for phosphoribosylaminoimidazole carboxylase) and ARG4 (encoding for argininosuccinate lyase). We demonstrate the applicability of Trichoderma reesei pyr4 and Aspergillus fumigatus pyrG to complement the URA3 deficiency. Further, we show that using RNPs improves the homologous recombination rate and 20 bp long homologous flanks are sufficient. Therefore, the repair cassettes can be constructed by a single PCR, abolishing the need for laborious and time-consuming cloning, which is necessary for previously described methods for CRISPR-mediated genome editing in these fungi. The here presented method allows fast and efficient genome editing for gene deletions, modifications, and insertions in Auresobasidium with a minimized risk of off-target effects.

Background Even if the loss of production capacity of a microorganism is said to be a serious problem in various biotechnology industries, reports in literature are rather rare. Strains of the genera Trichoderma reesei are used for large-scale production of cellulases, which are needed in food and feed, textile, paper industries and biofuel production. Results Here, we describe the phenomenon of spontaneous degeneration of T. reesei strains during large-scale cultivation. The phenotype of the degenerated population is characterized most importantly by a loss of any cellulase formation. Interestingly, promoter regions of relevant genes had a more compact chromatin in the (cel −) strains compared to productive strains. For a systematic investigation of the phenomenon a protocol for artificially induced and lab-scaled strain degeneration was developed. This workflow allows to determine the degeneration rate and thus, to compare the occurrence of a degenerated population in differently productive strains on the one hand, and to monitor the success of any strategies to prevent or decrease the degeneration on the other hand. While highly productive strains have higher degeneration rates compared to moderate producers, the degeneration can hardly be triggered in moderate producers. The observed (cel −) phenotype is not caused by a mutation in the gene encoding the essential transactivator Xyr1. The development of a non-producing population is also not triggered by any compounds released by either producing or non-producing cells. Conclusions The extent of the occurrence of a degenerated strain population relates to the production capacity of the strain and goes along with chromatin condensation in relevant promoter regions.

Secondary metabolites (SMs) are a vast group of compounds with different structures and properties that have been utilized as drugs, food additives, dyes, and as monomers for novel plastics. In many cases, the biosynthesis of SMs is catalysed by enzymes whose corresponding genes are co-localized in the genome in biosynthetic gene clusters (BGCs). Notably, BGCs may contain so-called gap genes, that are not involved in the biosynthesis of the SM. Current genome mining tools can identify BGCs, but they have problems with distinguishing essential genes from gap genes. This can and must be done by expensive, laborious, and time-consuming comparative genomic approaches or transcriptome analyses. In this study, we developed a method that allows semi-automated identification of essential genes in a BGC based on co-evolution analysis. To this end, the protein sequences of a BGC are blasted against a suitable proteome database. For each protein, a phylogenetic tree is created. The trees are compared by treeKO to detect co-evolution. The results of this comparison are visualized in different output formats, which are compared visually. Our results suggest that co-evolution is commonly occurring within BGCs, albeit not all, and that especially those genes that encode for enzymes of the biosynthetic pathway are co-evolutionary linked and can be identified with FunOrder. In light of the growing number of genomic data available, this will contribute to the studies of BGCs in native hosts and facilitate heterologous expression in other organisms with the aim of the discovery of novel SMs.

SummaryAureobasidium pullulans is a ubiquitous, polyextremotolerant, “yeast-like” ascomycete used for the industrial production of pullulan and other products and as biocontrol agent in the agriculture. Its application potential and its wide-spread occurrence make A. pullulans an interesting study object. The availability of a fast and efficient genome editing method is an obvious advantage for future basic and applied research on A. pullulans. In this study, we describe the development of a CRISPR/Cas9-based genome editing method using ribonucleoproteins (RNPs). We demonstrate that this method can be used for single and multiplex genome editing using only RNPs by targeting ura3 (encoding for orotidine-5′-phosphate decarboxylase), praics (encoding for phosphoribosyl aminoimidazole-succinocarboxamide synthase) and asl (encoding for arginine succinate lyase). We demonstrate the applicability of Trichoderma reesei pyr4 and Aspergillus fumigatus pyrG to complement the ura3 deficiency. Further, we show that the usage of RNPs can boost the homologous recombination rate up to nearly 100%, even when using only 20bp long homologous flanks. Therefore, the repair cassettes can be constructed by a single PCR, abolishing the need for laborious and time-consuming cloning. The here presented method allows fast and efficient genome editing for gene deletions, modifications, and insertions in A. pullulans.

In this work, we present the whole-genome sequence and the complete mitochondrial sequence of the black yeast-like strain Aureobasidium pullulans var. aubasidani CBS 100524, which produces the exopolysaccharide aubasidan and was previously isolated from Betula sp. slime flux from the Leningrad region, Russia., In this work, we present the whole-genome sequence and the complete mitochondrial sequence of the black yeast-like strain Aureobasidium pullulans var. aubasidani CBS 100524, which produces the exopolysaccharide aubasidan and was previously isolated from Betula sp. slime flux from the Leningrad Region of Russia.

In this work, we present the whole-genome sequence and the complete mitochondrial sequence of the black yeast-like strain Aureobasidium pullulans var. aubasidani CBS 100524, which produces the exopolysaccharide aubasidan and was previously isolated from Betula sp. slime flux from the Leningrad region, Russia.

Secondary metabolites (SMs) are a vast group of compounds with different structures and properties. Humankind uses SMs as drugs, food additives, dyes, and as monomers for novel plastics. In many cases, the biosynthesis of SMs is catalysed by enzymes whose corresponding genes are co-localized in the genome in biosynthetic gene clusters (BGCs). Notably, BGCs may contain so-called gap genes, that are not involved in the biosynthesis of the SM. Current genome mining tools can identify BGCs but they have problems with distinguishing essential genes from gap genes and defining the borders of a BGC. This can and must be done by expensive, laborious, and time-consuming comparative genomic approaches or co-expression analyses. In this study, we developed a novel tool that allows automated identification of essential genes in a BGC based solely on genomic data. The Functional Order (FunOrder) tool – Identification of essential biosynthetic genes through computational molecular co-evolution – searches for co-evolutionary linked genes in the BGCs. In light of the growing number of genomic data available, this will contribute to the studies of BGCs in native hosts and facilitate heterologous expression in other organisms with the aim of the discovery of novel SMs, including antibiotics and other pharmaceuticals.

The pentose phosphate pathway (PPP) is one of the most targeted pathways in metabolic engineering. This pathway is the primary source of NADPH, and it contributes in fungi to the production of many compounds of interest such as polyols, biofuels, carotenoids, or antibiotics. However, the regulatory mechanisms of the PPP are still not fully known. This review provides an insight into the current comprehension of the PPP in fungi and the limitations of this current understanding. It highlights how this knowledge contributes to targeted engineering of the PPP and thus to better performance of industrially used fungal strains. KEY POINTS: • Type of carbon and nitrogen source as well as oxidative stress influence the PPP. • A complex network of transcription factors regulates the PPP. • Improved understanding of the PPP will allow to increase yields of bioprocesses.

Within the last 20 years, ground-breaking progress has been made in the field of synthetic biology, enabling the construction of novel pathways up to entire synthetic genomes in both prokaryotic and eukaryotic organisms. These innovations are primarily adapted for biotechnological applications, where filamentous fungi such as Trichoderma reesei are widely used to produce various enzymes of industrial interest. In the following chapter, we provide a broad overview on the current progress involving this particular organism, covering studies on synthetic promoters and transcription factors as well as synthetic expression platforms. Furthermore, this chapters aims to be a short introduction to the present book since many methods mentioned here are described in detail in the subsequent chapters.

Within the last 20 years, ground-breaking progress has been made in the field of synthetic biology, enabling the construction of novel pathways up to entire synthetic genomes in both prokaryotic and eukaryotic organisms. These innovations are primarily adapted for biotechnological applications, where filamentous fungi such as Trichoderma reesei are widely used to produce various enzymes of industrial interest. In the following chapter, we provide a broad overview on the current progress involving this particular organism, covering studies on synthetic promoters and transcription factors as well as synthetic expression platforms. Furthermore, this chapters aims to be a short introduction to the present book since many methods mentioned here are described in detail in the subsequent chapters.

Erythritol is a naturally abundant sweetener gaining more and more importance especially within the food industry. It is widely used as sweetener in calorie-reduced food, candies, or bakery products. In research focusing on sugar alternatives, erythritol is a key issue due to its, compared to other polyols, challenging production. It cannot be chemically synthesized in a commercially worthwhile way resulting in a switch to biotechnological production. In this area, research efforts have been made to improve concentration, productivity, and yield. This mini review will give an overview on the attempts to improve erythritol production as well as their development over time.

Long non-coding RNAs (lncRNAs) are crucial factors acting on regulatory processes in eukaryotes. Recently, for the first time in a filamentous fungus, the lncRNA HAX1 was characterized in the ascomycete Trichoderma reesei. In industry, this fungus is widely applied for the high-yield production of cellulases. The lncRNA HAX1 was reported to influence the expression of cellulase-encoding genes; interestingly, this effect is dependent on the presence of its most abundant length. Clearly, HAX1 acts in association with a set of well-described transcription factors to regulate gene expression. In this study, we attempted to elucidate the regulatory strategy of HAX1 and its interactions with the major transcriptional activator Xylanase regulator 1 (Xyr1). We demonstrated that HAX1 interferes with the negative feedback regulatory loop of Xyr1 in a sophisticated manner and thus ultimately has a positive effect on gene expression.

The ascomycete Trichoderma reesei is used for the production of plant cell wall-degrading enzymes in industrial scale. The interplay of the transactivator Xyr1 and the repressor Cre1 mainly regulates the expression of these enzymes. During induc-ing conditions, such as in the presence of sophorose, the transcription of the two major cellulase-encoding genes, cbh1 and cbh2, is activated as well as the expression of xyr1. In the presence of D-glucose carbon catabolite repression mediated by Cre1 takes place and the expression of Xyr1 and the plant cell wall-degrading enzymes is down-regulated. In this study we compare the chromatin status of xyr1, cbh1, and cbh2 promoters in the wild-type strain and the Cre1-deficient strain Rut-C30. Chromatin rearrangement occurs in the xyr1 promoter during induction on sophorose. Chromatin opening and protein-DNA interactions in the xyr1 promoter were detected especially in a region located 0.9 kb upstream the translation start co-don, which bears several putative Cre1-binding sites and a CCAAT-box. Moreover, the xyr1 promoter is overall more acces-sible in a cre1-truncated background, no matter which carbon source is present. This makes the xyr1 regulatory sequence a good target for promoter engineering aiming at the enhancement of cellulase production.

Long noncoding RNAs (lncRNAs) are crucial players in epigenetic regulation. They were initially discovered in human, yet they emerged as common factors involved in a number of central cellular processes in several eukaryotes. For example, in the past decade, research on lncRNAs in yeast has steadily increased. Several examples of lncRNAs were described in Saccharomyces cerevisiae and Schizosaccharomyces pombe. Also, screenings for lncRNAs in ascomycetes were performed and, just recently, the first full characterization of a lncRNA was performed in the filamentous fungus Trichoderma reesei. In this review, we provide a broad overview about currently known fugal lncRNAs. We make an attempt to categorize them according to their functional context, regulatory strategies or special properties. Moreover, the potential of lncRNAs as a biotechnological tool is discussed.

The state-of-the-art procedure for gene insertions into Trichoderma reesei is a cotransformation of two plasmids, one bearing the gene of interest and the other a marker gene. This procedure yields up to 80% transformation efficiency, but both the number of integrated copies and the loci of insertion are unpredictable. This can lead to tremendous pleiotropic effects. This study describes the development of a novel transformation system for site-directed gene insertion based on auxotrophic markers. For this purpose, we tested the applicability of the genes asl1 (encoding an enzyme of the l-arginine biosynthesis pathway), the hah1 (encoding an enzyme of the l-lysine biosynthesis pathway), and the pyr4 (encoding an enzyme of the uridine biosynthesis pathway). The developed transformation system yields strains with an additional gene at a defined locus that are prototrophic and ostensibly isogenic compared to their parental strain. A positive transformation rate of 100% was achieved due to the developed split-marker system. Additionally, a double-auxotrophic strain that allows multiple genomic manipulations was constructed, which facilitates metabolic engineering purposes in T. reesei. By employing goxA of Aspergillus niger as a reporter system, the influence on the expression of an inserted gene caused by the orientation of the insertion and the transformation strategy used could be demonstrated. Both are important aspects to be considered during strain engineering.

Humicola grisea var. thermoidea (Hgvt) is a thermophilic ascomycete that produces lignocellulolytic enzymes and it is proposed for the conversion of agricultural residues into useful byproducts. Drugs that inhibit the DNA methyltransferases (DNMTs) activity are employed in epigenetic studies but nothing is known about a possible effect on the production of fungal enzymes. We evaluated the effect of 5-aza-2'-deoxycytidine (5-Aza; a chemical inhibitor of DNMTs activity) on the secreted enzyme activity and on the transcription of cellulase and xylanase genes from Hgvt grown in agricultural residues and in glucose. Upon cultivation on wheat bran (WB), the drug provoked an increase in the xylanase activity at 96 h. When Hgvt was grown in glucose (GLU), a repressor of Hgvt glycosyl hydrolase genes, 5-Aza led to increased transcript accumulation for the cellobiohydrolases and for the xyn2 xylanase genes. In WB, 5-Aza enhanced the expression of the transcription factor CreA gene. Growth on WB or GLU, in presence of 5-Aza, led to a significant increase in transcripts of the pH-response regulator PacC gene. To our knowledge, this is the first report on the effect of a DNMT inhibitor in the production of fungal plant cell wall degradation enzymes.

Hydrophobins (HFBs) are small surface-active proteins secreted by filamentous fungi. Being amphiphilic, they spontaneously form layers that convert surfaces from hydrophilic to hydrophobic and vice versa. We have compared properties of the class II HFB4 and HFB7 from Trichoderma virens as produced in Escherichia coli and Pichiapastoris. Since the production in E. coli required denaturation/renaturation steps because of inclusion bodies, this treatment was also applied to HFBs produced and secreted in yeast. The protein yields for both systems were similar. Both HFBs produced by E. coli proved less active on PET compared to HFBs produced in P. pastoris. HFBs produced in E. coli decreased the hydrophilicity of glass the most, which correlated with the adsorption of a more dense protein layer on glass compared to HFBs produced in P. pastoris. The hydrophobins produced in P. pastoris formed highly structured monolayers. Layers of hydrophobins produced in E. coli were less prone to self-organization. Our data suggests that irrespective of the production host, the HFBs could be used in various applications that are based on their surface activity. However, the production host and the subsequent purification procedure will influence the stability of HFB layers. In the area of high-value biomedical devices and nanomaterials, where the formation of highly ordered protein monolayers is essential, our results point to P. pastoris as the preferred production host. Furthermore, the choice of an appropriate hydrophobin for a given application appears to be equally important. (C) 2017 The Authors. Published by Elsevier B.V.

Hypocrea jecorina (anamorph Trichoderma reesei) is a saprophytic fungus that produces hydrolases, which are applied in different types of industries and used for the production of biofuel. A recombinant Hypocrea strain, which constantly expresses the main transcription activator of hydrolases (Xylanase regulator 1), was found to grow faster on xylan and its monomeric backbone molecule d-xylose. This strain also showed improved ability of clearing xylan medium on plates. Furthermore, this strain has a changed transcription profile concerning genes encoding for hydrolases and enzymes associated with degradation of (hemi)celluloses. We demonstrated that enzymes of this strain from a xylan cultivation favoured break down of hemicelluloses to the monomer d-xylose compared to the parental strain, while the enzymes of the latter one formed more xylobiose. Applying supernatants from cultivation on carboxymethylcellulose in enzymatic conversion of hemicelluloses, the enzymes of the recombinant strain were clearly producing more of both, d-xylose and xylobiose, compared to the parental strain. Altogether, these results point to a changed hydrolase expression profile, an enhanced capability to form the xylan-monomer d-xylose and the assumption that there is a disordered induction pattern if the Xylanase regulator 1 is de-regulated in Hypocrea.

The ascomycete Trichoderma reesei is one of the most well studied cellulolytic microorganisms. This fungus is widely used in the biotechnology industry, mainly in the production of biofuels. Due to its importance, its genome was sequenced in 2008, opening new avenues to study this microorganism. In this 'post-genomic' era, a transcriptomic and proteomic era has emerged. Here, we present an overview of new findings in the gene expression regulation network of T. reesei. We also discuss new rational strategies to obtain mutants that produce hydrolytic enzymes with a higher yield, using metabolic engineering. Finally, we present how synthetic biology strategies can be used to create engineered promoters to efficiently synthesize enzymes for biomass degradation to produce bioethanol.

The production of proteins using filamentous fungi as hosts has become a very important and profitable sector of industry. Filamentous fungi possess many traits that allow their usage as cell factories for the expression of native and heterologous proteins, and secondary metabolites. But they also possess inherent regulatory circuits to regulate the expression of these compounds. One of these regulatory systems is carbon catabolite repression (CCR). Upon availability of an easily metabolizable compound like d-glucose other routes of metabolism are reduced. In filamentous fungi the regulatory protein CreA/1 is the main mediator of CCR. This transcription factor was identified through homology comparison with the known catabolite repressor from Saccharomyces cerevisiae, Mig1. CreA/1 binds 5′-SYGGRG-3′ DNA motifs often present in promoters of target genes. Filamentous fungi like Aspergillus nidulans and A. niger, Trichoderma reesei, Neurospora crassa, Acremonium cellulyticus, and Trametes spp. are used to salvage their lignocellulolytic enzymes. Penicillium chrysogenum is a prominent producer of penicillin N and can also produce carbohydrate active enzymes (CAZYs). Many involved genes are under the negative control of CreA/1 and repressed by it in presence of d-glucose. Exploiting CCR for protein production means to find a way to circumvent it. This can be achieved by gene deletion or mutation. Another approach is the modification of the promoter of genes of interest. But there is no universal remedy because each species displays little differences in gene regulation. Taking this into account strategies for the improvement of protein production have to be adjusted to the host.

Background Transcription of genes coding for xylanolytic and cellulolytic enzymes in Aspergillus niger is controlled by the transactivator XlnR. In this work we analyse and model the transcription dynamics in the XlnR regulon from time-course data of the messenger RNA levels for some XlnR target genes, obtained by reverse transcription quantitative PCR (RT-qPCR). Induction of transcription was achieved using low (1 mM) and high (50 mM) concentrations of D-xylose (Xyl). We investigated the wild type strain (Wt) and a mutant strain with partial loss-of-function of the carbon catabolite repressor CreA (Mt). Results An improved kinetic differential equation model based on two antagonistic Hill functions was proposed, and fitted to the time-course RT-qPCR data from the Wt and the Mt by numerical optimization of the parameters. We show that perturbing the XlnR regulon with Xyl in low and high concentrations results in different expression levels and transcription dynamics of the target genes. At least four distinct transcription profiles were observed, particularly for the usage of 50 mM Xyl. Higher transcript levels were observed for some genes after induction with 1 mM rather than 50 mM Xyl, especially in the Mt. Grouping the expression profiles of the investigated genes has improved our understanding of induction by Xyl and the according regulatory role of CreA. Conclusions The model explains for the higher expression levels at 1 mM versus 50 mM in both Wt and Mt. It does not yet fully encapsulate the effect of partial loss-of-function of CreA in the Mt. The model describes the dynamics in most of the data and elucidates the time-dynamics of the two major regulatory mechanisms: i) the activation by XlnR, and ii) the carbon catabolite repression by CreA. Electronic supplementary material The online version of this article (doi:10.1186/s12918-016-0257-4) contains supplementary material, which is available to authorized users.

Aspergillus niger is an important organism for the production of industrial enzymes such as hemicellulases and pectinases. The xylan-backbone monomer, d -xylose, is an inducing substance for the coordinate expression of a large number of polysaccharide-degrading enzymes. In this study, the responses of 22 genes to low (1 mM) and high (50 mM) d -xylose concentrations were investigated. These 22 genes encode enzymes that function as xylan backbone-degrading enzymes, accessory enzymes, cellulose-degrading enzymes, or enzymes involved in the pentose catabolic pathway in A. niger . Notably, genes encoding enzymes that have a similar function (e.g., xylan backbone degradation) respond in a similar manner to different concentrations of d -xylose. Although low d -xylose concentrations provoke the greatest change in transcript levels, in particular, for hemicellulase-encoding genes, transcript formation in the presence of high concentrations of d -xylose was also observed. Interestingly, a high d -xylose concentration is favorable for certain groups of genes. Furthermore, the repressing influence of CreA on the transcription and transcript levels of a subset of these genes was observed regardless of whether a low or high concentration of d -xylose was used. Interestingly, the decrease in transcript levels of certain genes on high d -xylose concentrations is not reflected by the transcript level of their activator, XlnR. Regardless of the d -xylose concentration applied and whether CreA was functional, xlnR was constitutively expressed at a low level.

The saprophytic fungus Hypocrea jecorina (anamorph, Trichoderma reesei ) is an important native producer of hydrolytic enzymes, including xylanases. Regarding principles of sustainability, cheap and renewable raw materials, such as d -xylose (the backbone monomer of xylan), have been receiving increasing attention from industries. Recently, it was demonstrated that small (0.5 to 1 mM) amounts of d -xylose induce the highest expression of xylanase in H. jecorina . However, it was also reported that active metabolism of d -xylose is necessary for induction. In this report, we demonstrate that xylitol, the next intermediate in the pentose pathway after d -xylose, does not trigger transcription of xylanase-encoding genes in H. jecorina QM9414. The highest level of transcription of xylanolytic enzyme-encoding genes occurred in an xdh1 (encoding a xylitol dehydrogenase) deletion strain cultured in the presence of 0.5 mM d -xylose, suggesting that a metabolite upstream of xylitol is the inducer. The expression levels of xylanases in an xdh1 - lad1 double-deletion strain were lower than that of an xdh1 deletion strain. This observation suggested that l -xylulose is not an inducer and led to the hypothesis that l -arabitol is the actual inducer of xylanase expression. A direct comparison of transcript levels following the incubation of the H. jecorina parental strain with various metabolites of the pentose pathway confirmed this hypothesis. In addition, we demonstrate that xyr1 , the activator gene, is not induced in the presence of pentose sugars and polyols, regardless of the concentration used; instead, we observed low constitutive expression of xyr1 .

Hypocrea jecorina is an industrially important filamentous fungus due to its effective production of hydrolytic enzymes. It has received increasing interest because of its ability to convert lignocellulosic biomass to monomeric sugars, which can be converted into biofuels or platform chemicals. Genetic engineering of strains is a highly important means of meeting the requirements of tailor-made applications. Therefore, we report the development of a transformation system that allows highly efficient gene targeting by using a tmus53 (human LIG4 homolog) deletion strain. Moreover, it permits the unlimited reuse of the same marker by employing a Cre/loxP-based excision system. Both marker insertion and marker excision can be positively selected for by combining resistance to hygromycin B and loss of sensitivity to fluoroacetamide. Finally, the marker pyr4 , also positively selectable for insertion and loss, can be used to remove the cre gene.

In Hypocrea jecorina , Xyr1 (xylanase regulator 1) is the main transcription activator of hydrolase-encoding genes, such as xyn1 , xyn2 , bxl1 , cbh1 , cbh2 , egl1 , and bgl1 . Even though Xyr1 mediates the induction signal for all these genes derived from various inducing carbon sources and compounds, xyr1 transcription itself is not inducible by any of these substances. However, cultivation on glucose as the carbon source provokes carbon catabolite repression of xyr1 transcription mediated by Cre1. In addition, xyr1 transcription is repressed by the specific transcription factor Ace1. Moreover, Xyr1 is permanently available in the cell, and no de novo synthesis of this factor is needed for a first induction of xyn1 transcription. The constitutive expression of xyr1 leads to a significant elevation/deregulation of the xyn1 , xyn2 , and bxl1 transcription compared to what is seen for the parental strain. Overall, the corresponding xylanolytic enzyme activities are clearly elevated in a constitutively xyr1 -expressing strain, emphasizing this factor as an auspicious target for genetically engineered strain improvement.

The state-of-the-art procedure for gene insertions into Trichoderma reesei is a cotransformation of two plasmids, one bearing the gene of interest and the other a marker gene. This procedure yields up to 80% transformation efficiency, but both the number of integrated copies and the loci of insertion are unpredictable. This can lead to tremendous pleiotropic effects. This study describes the development of a novel transformation system for site-directed gene insertion based on auxotrophic markers. For this purpose, we tested the applicability of the genes asl1 (encoding an enzyme of the l-arginine biosynthesis pathway), the hah1 (encoding an enzyme of the l-lysine biosynthesis pathway), and the pyr4 (encoding an enzyme of the uridine biosynthesis pathway). The developed transformation system yields strains with an additional gene at a defined locus that are prototrophic and ostensibly isogenic compared to their parental strain. A positive transformation rate of 100% was achieved due to the developed split-marker system. Additionally, a double-auxotrophic strain that allows multiple genomic manipulations was constructed, which facilitates metabolic engineering purposes in T. reesei. By employing goxA of Aspergillus niger as a reporter system, the influence on the expression of an inserted gene caused by the orientation of the insertion and the transformation strategy used could be demonstrated. Both are important aspects to be considered during strain engineering.

Background The ascomycete Trichoderma reesei is industrially used for the production of cellulases. During the production process xylanases are co-secreted, which uses energy and nutrients. Cellulases and xylanases share the same main regulators, which makes a knowledge-based strain design difficult. However, previously a cis-element in the promoter of the main xylanase-encoding gene was identified as binding site for a putative repressor. Subsequently, three candidate repressors were identified in a pull-down approach. The expression of the most promising candidate, Xpp1 (Xylanase promoter-binding protein 1), was reported to be up-regulated on the repressing carbon source d-glucose and to bind the cis-element in vitro. Results In this study, Xpp1 was deleted and over-expressed in T. reesei. An in vivo DNA-footprint assay indicated that Xpp1 binds a palindromic sequence in the xyn2 promoter. Comparison of the deletion, the over-expression, and the parent strain demonstrated that Xpp1 regulates gene expression of xylanolytic enzymes at later cultivation stages. Xpp1 expression was found to be up-regulated, additionally to d-glucose, by high d-xylose availability. These findings together with the observed xyn2 transcript levels during growth on xylan suggest that Xpp1 is the mediator of a feedback mechanism. Notably, Xpp1 has neither influence on the d-xylose metabolism nor on the expression of cellulases. Conclusions Xpp1 as regulator acting on the expression of xylanases, but not cellulases, is a highly promising candidate for knowledge-based strain design to improve the cellulases-to-xylanases ratio during industrial cellulase production. Electronic supplementary material The online version of this article (doi:10.1186/s13068-015-0298-8) contains supplementary material, which is available to authorized users.

Genetic engineering of fungal strains is highly important for meeting the requirements of tailor-made applications in biotechnology. Aiming targeted strain design we describe a transformation approach for filamentous fungi that favours homologous integration and permits multiple rounds of gene deletions by applying a reusable and bidirectionally functional marker system.

We overexpressed the err1 gene in the Trichoderma reesei wild-type and in the cellulase hyperproducing, carbon catabolite derepressed strain Rut-C30 in order to investigate the possibility of producing erythritol with T. reesei. Two different promoters were used for err1 overexpression in both strains, a constitutive (the native pyruvat kinase (pki) promoter) and an inducible one (the native β-xylosidase (bxl1) promoter). The derived recombinant strains were precharacterized by analysis of err1 transcript formation on D-xylose and xylan. Based on this, one strain of each type was chosen for further investigation for erythritol production in shake flasks and in bioreactor experiments. For the latter, we used wheat straw pretreated by an alkaline organosolve process as lignocellulosic substrate. Shake flask experiments on D-xylose showed increased erythritol formation for both, the wild-type and the Rut-C30 overexpression strain compared to their respective parental strain. Bioreactor cultivations on wheat straw did not increase erythritol formation in the wild-type overexpression strain. However, err1 overexpression in Rut-C30 led to a clearly higher erythritol formation on wheat straw.

Cellulose is the most abundant biopolymer worldwide. It has a huge potential for biofuel production and as alternative starting material for petrochemistry products. In nature, cellulose forms a stable crystal structure and is mostly available tightly bound to lignin and hemicelluloses, as a component of the lignocelluloses complex. This arrangement makes cellulose hard to degrade. Filamentous fungi have proven to be able to degrade (ligno)cellulose very efficiently. Especially Trichoderma reesei exhibits high cellulolytic activity and produces over 100 g/l secreted proteins in industrial fermentations. Most of which are cellulases: endoglucanases cleave cellulose mid-chains, cellbiohydrolases exhibit exo-cellulolytic activity releasing the disaccharide cellobiose, and β-glucosidases break down cellobiose to d -glucose. These enzymes are industrially used for the degradation of cellulose after the removal of lignin and hemicelluloses, which is done chemically, mechanically or enzymatically. This chapter deals with general aspects of (ligno)cellulose degradation and, more specifically, the role of the cellulolytic system of Trichoderma sp. therein, with an emphasis on the industrially important T. reesei.