Search

Abstract Background His bundle pacing (HBP) may be a challenging procedure, often involving a long fluoroscopic time (FT) and a long procedural time (PT). We sought to evaluate whether the use of a new nonfluroscopic mapping (NFM) system, the KODEX‐EPD, is able to reduce FT and PT when mapping is performed by the pacing catheter rather than an electrophysiological mapping catheter. Methods and Results We included 46 consecutive patients (77 ± 8 years; 63% male) who underwent HBP; in 22 a NFM‐guided procedure with the KODEX‐EPD system was performed (group 1), whereas in 24 a conventional fluoroscopy‐guided approach was used (group 2). Pacing indications were sick sinus syndrome in 13, atrioventricular block in 21, and cardiac resynchronization therapy in 12 cases. Both a lumen‐less fixed helix lead and a stylet‐driven extendable helix lead were used, respectively, in 24% and 76% of patients. HBP was successful in 22 patients (100%) in group 1 and 23 patients (96%) in group 2. The FT was significantly reduced in group 1 (183 ± 117 s vs 464.1 ± 352 s in group 2, p = .012). There were no significant differences between groups in PT and other procedural outcomes. Conclusions The KODEX‐EPD system may be safely used in HBP procedures. It is effective in reducing ionizing radiation exposure, as evidenced by the significant drop in FT, without increasing PT.

Pulmonary vein isolation (PVI) is the established cornerstone for atrial fibrillation (AF) ablation, indeed current guidelines recognize PVI as the gold standard for first-time AF ablation, regardless of if it is paroxysmal or persistent. Since 1998 when Haïssaguerre pioneered AF ablation demonstrating a burden reduction after segmental pulmonary vein (PV) ablation, our approach to PVI was superior in terms of methodology and technology. This review aims to describe how paroxysmal atrial fibrillation ablation has evolved over the last twenty years. We will focus on available techniques, a mechanistic understanding of paroxysmal AF genesis and the possibility of a tailored approach for the treatment of AF, before concluding with a future perspective.

Heart failure (HF) represents a significant global health challenge that is still responsible for increasing morbidity and mortality despite advancements in pharmacological treatments. This review investigates the effectiveness of non-pharmacological interventions in the management of HF, examining lifestyle measures, physical activity, and the role of some electrical therapies such as catheter ablation, cardiac resynchronization therapy (CRT), and cardiac contractility modulation (CCM). Structured exercise training is a cornerstone in this field, demonstrating terrific improvements in functional status, quality of life, and mortality risk reduction, particularly in patients with HF with reduced ejection fraction (HFrEF). Catheter ablation for atrial fibrillation, premature ventricular beats, and ventricular tachycardia aids in improving left ventricular function by reducing arrhythmic burden. CRT remains a key intervention for selected HF patients, helping achieve left ventricular reverse remodeling and improving symptoms. Additionally, the emerging therapy of CCM provides a novel opportunity for patients who do not meet CRT criteria or are non-responders. Integrating non-pharmacological interventions such as digital health alongside specific medications is key for optimizing outcomes in HF management. It is imperative to tailor approaches to individual patients in this diverse patient population to maximize benefits. Further research is warranted to improve treatment strategies and enhance patient outcomes in HF management.

AimsSupraventricular tachycardias may trigger atrial fibrillation (AF). The aim of the study was to evaluate the prevalence of supraventricular tachycardia (SVT) inducibility in patients referred for AF ablation and to evaluate the effects of SVT ablation on AF recurrences.Methods and results249 patients (mean age: 54 ± 14 years) referred for paroxysmal AF ablation were studied. In all patients, only AF relapses had been documented in the clinical history. 47 patients (19%; mean age: 42 ± 11 years) had inducible SVT during the electrophysiological study and underwent an ablation targeted only at SVT suppression. Ablation was successful in all 47 patients. The ablative procedures were: 11 slow-pathway ablations for atrioventricular nodal re-entrant tachycardia; 6 concealed accessory pathway ablations for atrioventricular re-entrant tachycardia; 17 focal ectopic atrial tachycardia ablations; 13 with only one arrhythmogenic pulmonary vein. No recurrences of SVT were observed during the follow-up (32 ± 18 months). 4 patients (8.5%) showed recurrence of at least one episode of AF. Patients with inducible SVT had less structural heart disease and were younger than those without inducible SVT.ConclusionA significant proportion of candidates for AF ablation are inducible for an SVT. SVT ablation showed a preventive effect on AF recurrences. Those patients should be selected for simpler ablation procedures tailored only to the triggering arrhythmia suppression.

Abstract Nowadays, fluoroscopy is the standard tool used to help physicians during pacing lead implantation. However, its use entails significant radiation exposure for physicians and especially for patients. For the first time, the present case report describes the use of the electro‐anatomical mapping (EAM) navigation system KODEX‐EPD for cardiac resynchronization therapy (CRT) implantation. These findings suggest that CRT implantation guided by the KODEX‐EPD system is feasible and safe with the minimization of X‐ray and dye exposure.

Atrial fibrillation (AF) is the most common sustained arrhythmia in clinical practice, and it is an enormous burden worldwide because of its high morbidity, disability and mortality. It is generally acknowledged that physical activity (PA) is strongly associated with a significant reduction in the risk of cardiovascular (CV) disease and all-cause mortality. Moreover, it has been observed that moderate and regular physical activity has the potential to reduce the risk of AF, in addition to improving overall well-being. Nevertheless, some studies have associated intense physical activity with an increased risk of AF. This paper aims to review the main related literature to investigate the association between PA and AF incidence and draw pathophysiological and epidemiological conclusions.

Abstract The autonomic nervous system (ANS) is known to play an important role in the genesis and maintenance of atrial fibrillation (AF). Biomolecular and genetic mechanisms, anatomical knowledges with recent diagnostic techniques acquisitions, both invasive and non‐invasive, have enabled greater therapeutic goals in patients affected by AF related to ANS imbalance. Catheter ablation of ganglionated plexi (GP) in the left and right atrium has been proposed in varied clinical conditions. Moreover interesting results arise from renal sympathetic denervation and vagal nerve stimulation. Despite all this, in the scenario of ANS modulation translational strategies we necessary must consider the treatment or correction of dynamic factors such as obesity, obstructive sleep apnea, lifestyle, food, and stress. Finally, new antiarrhythmic drugs, gene therapy and “ablatogenomic” could be represent exciting future therapeutic perspectives.

Catecholaminergic Polymorphic Ventricular Tachycardia (CPVT) is a rare electrical genetic disease characterized by ventricular polymorphic tachycardia and/or bidirectional ventricular tachycardia induced by the release of catecholamines caused by intense physical or emotional stress in structurally normal hearts. Mostly, it is caused by mutations in genes that are involved in calcium homeostasis, in particular in the gene encoding for cardiac ryanodine receptor (RyR2). Our observation is the first description of familial CPVT caused by mutation of the RyR2 gene, linked to the complete AV block.

Purpose: Electroanatomical mapping (EAM) could increase cardiac magnetic resonance imaging (CMR) sensitivity in detecting ventricular scar. Possible bias may be scar over-estimation due to inadequate tissue contact. Aim of the study is to evaluate contact-force monitoring influence during EAM, in patients with idiopathic right ventricular arrhythmias. Methods: 20 pts (13 M; 43 ± 12 y) with idiopathic right ventricular outflow tract (RVOT) arrhythmias and no structural abnormalities were submitted to Smarttouch catheter Carto3 EAM. Native maps included points collected without considering contact-force. EAM scar was defined as area ≥1 cm2 including at least 3 adjacent points with signal amplitude (bipolar

In spite of technological progress and the improving skills of operators, atrial fibrillation (AF) ablation results appear to date to be at a plateau. In any case, the superiority of ablation over pharmacological therapy in terms of effectiveness, reduction of hospitalizations, and improvement has been well demonstrated in recent randomized trials. Triggers, substrate, and modulating factors (elements of Coumel’s triangle) play different roles in paroxysmal and persistent AF, so induction and perpetuation mechanisms of arrhythmia may be different in each patient. Although effective ablative strategies are available for the treatment of paroxysmal AF triggers and persistent AF substrates, an adequate clinical evaluation of the patient is crucial in order to increase the chances of success. Recognizing triggers allows not only performing an effective ablation but also to avoid unnecessary lesions and at the same time reducing the risk of complications. AF beginning and triggers could be recorded by 12-lead ECG, continuous Holter monitoring, or implantable devices. In case of an unsuccessful noninvasive evaluation, nonpulmonary vein triggers should be investigated with an electrophysiological study. Persistent AF needs more effort to perform an accurate substrate characterization. Among the many methods proposed, recently the use of high-density mapping and multipolar catheters seems of particular benefit in order to clarify the arrhythmia mechanisms. Surgical and hybrid techniques allow to treat regions such as the posterior wall or Bachmann’s bundle, which is fundamental for an ablative strategy that goes beyond just pulmonary vein isolation. Too often, patients are referred to electrophysiology laboratories without adequate preprocedural screening and planning in order to submit them to a standard “ready-made” procedure. The accurate search for triggers in paroxysmal AF and the correct recognition of the link between a possible underlying heart disease and the substrate in persistent AF could allow us to tailor the interventional approach in order to overcome the current plateau, increasing ablative procedure success and minimizing complications.

Background: Third-generation cryoballoon (CB3) is characterized by a 40% shorter distal tip designed to increase the rate of pulmonary veins real-time signal recording in order to measure time necessary to isolate veins, the “Time to effect” (TTE). Few data are currently available on clinical follow up of CB3 treated patients. Methods: Sixtyeight consecutive patients (mean age 57.8 ± 9.6 years, 48 male) with paroxysmal or persistent atrial fibrillation (AF) were enrolled. Thirthyfour (25 paroxysmal AF) underwent to a 28 mmCB3 pulmonary veins isolation and were compared to 34 treated (21 paroxysmal AF) with 28 mmCB2. Results: CB3 use was correlated to significant increase of the possibility to measure TTE in every treated veins (left superior 82,35% vs 23,53%, left inferior 70,59% vs 38,24%, right superior 58,82% vs 14,71%, right inferior 52,94% vs 17,65%). When it is measured, TTE wasn't different between two groups. Higher nadir temperature was observed in CB3 patients (−39.4 ± 5.2 °C vs −43.0 ± 7.2 °C, p = 0.03). CB3 procedures were shorter (91.4 ± 21.7 vs 110.9 ± 31.8 min, p = 0.018), with a significant reduction in cryoenergy delivery time (24.2 ± 8.5 vs 20.3 ± 6.7 min, p

Background: The Amigo® Remote Catheter System is a relatively new robotic system for catheter navigation. This study compared feasibility and safety using Amigo (RCM) versus manual catheter manipulation (MCM) to treat paroxysmal atrial fibrillation (PAF). Contact force (CF) and force-time integral (FTI) values obtained during pulmonary vein isolation (PVI) ablation were compared. Methods: Forty patients were randomly selected for either RCM (20) or MCM (20). All were studied with the Thermocool® SmartTouch® force-sensing catheter (STc). Contact Force (CF), Force Time Integral (FTI) and procedure-related data, were measured/stored in the CARTO®3. Results: All cases achieved complete PVI without major complications. Mean CF was significantly higher in the RCM group (13.3 ± 7.7 g in RCM vs. 12.04 ± 7.42 g in MCM p

Abstract Background Technetium-99 m-labelled macroaggregated human serum albumin ([99mTc]Tc-MAA) is commonly used for lung perfusion scintigraphy. The European Pharmacopoeia (Eu.Ph.) specifies thin-layer chromatography (TLC) as the only method to assess its radiochemical purity (RCP). Similarly, TLC is the sole method reported in the literature to evaluate the RCP of Gallium-68-labelled MAA [68 Ga]Ga-MAA, recently introduced for lung perfusion PET/CT imaging. Since [68 Ga]Ga-MAA is prepared from commercial kits originally designed for the preparation of [99mTc]Tc-MAA, it is essential to optimize and validate the preparation methods for [68 Ga]Ga-MAA. Results We tested a novel, simplified method for the preparation of [68 Ga]Ga-MAA that does not require organic solvents, prewash or final purification steps to remove radioactive impurities. We assessed the final product using radio-TLC, radio-UV-HPLC, and radio SDS-PAGE. Overall, our quality control (QC) method successfully detected [68 Ga]Ga-MAA along with all potential impurities, including free Ga-68, [68 Ga]Ga-HSA, unlabeled HSA, which may occur during labelling process and HEPES residual, a non-toxic but non-human-approved contaminant, used as buffer solution. We then applied our QC system to [68 Ga]Ga-MAA prepared under different conditions (25°–40°–75°–95 °C), thus defining the optimal temperature for labelling. Scanning Electron Microscopy (SEM) analysis of the products obtained through our novel method confirmed that most [68 Ga]Ga-MAA particles preserved the morphological structure and size distribution of unlabeled MAA, with a particle diameter range of 25–50 μm, assuring diagnostic efficacy. Conclusions We optimized a novel method to prepare [68 Ga]Ga-MAA through a QC system capable of monitoring all impurities of the final products.

Background: With the growing use of dental implants, there is an urgent need to determine a prosthetic placement protocol by assessing implant stability and monitoring healing. Implant Stability Quotient (ISQ) values are produced using dental non-invasive devices through resonance frequency analysis, considered as indicators for measuring primary stability (i.e., at implant placement), monitoring biological stability (osseointegration), and prosthetic loading. A systematic and detailed comparison of ISQ measurement devices, for a given patient population, is lacking in the literature. This aspect is the subject of the present work, with the devices being two that are widely used in clinical practice (Osstell® and Osseo®100). The aim of this study was to evaluate the reliability of ISQ measurement using two standard devices most commonly used in clinical practice and to highlight any differences when comparing measurements at undefined time intervals. Methods: We enrolled 50 patients (16 males and 34 females) with a mean age of 55.4 years, who indicated dental implant placement and met the inclusion criteria. The sample was divided into two equal groups based on bone density: A (D1–D2 bone density) and B (D3–D4 bone density); each had 25 patients with 40 implants. ISQ was measured using two devices: Osstell® and Osseo 100®, at different time points (A: three and B: four follow-ups). Results: All enrolled patients completed the study without adverse events; all implants placed were successful, with no implant failure. In each of the study groups, ISQ values increased gradually with increasing follow-up time, and there was no significant difference between Osstell and Osseo 100 values at follow-up times except for the T1 follow-up in group A. Temporal comparisons for the two devices revealed significant differences in T0 vs. T2 in group A, whereas significant differences existed in T0 vs. T1, T2, and T3 in group B. Our findings indicated that the overall effect significantly depended on bone density rather than on the device used to measure ISQ. Conclusion: Regardless of the devices used, the ISQ measurement effectively monitors healing after implant insertion and allows prosthetic load to be modulated according to the ISQ value, especially when prosthetizing implants placed in fine trabecular bone (D4 or regenerated bone).

Background: Patients with edentulism often have an impaired functional, phonetic, and esthetic status, resulting in poor quality of life; hence, the mandibular overdenture has been considered the standard implant treatment for such patients. Therefore, this study aimed to assess the effectiveness of mandibular overdentures retained using mini-implants on patient-reported satisfaction and their long-term survival. Methods: We searched patients’ medical records for eligible subjects, screening and inviting patients who received a mandibular overdenture anchored on mini-implants over ten years ago. We used a numerical rating scale from 0 (the worst) to 10 (the best) to assess four aspects: comfort, retention, chewing ability, and speaking ability before and after having mini-implants. We carried out Kaplan–Meier analysis to assess their survival. Results: Forty-eight elderly patients who were medically compromised and had a mandibular overdenture anchored on four permucosal mini-implants were included. All patient-reported satisfaction (comfort, retention, chewing ability, and speaking ability) was significantly improved after supporting mandibular overdentures with mini-implants (p-values < 0.05), with retention and chewing ability being the most substantially improved. The 10- and 15-year mini-implant survival rates were both 97.9%. Conclusions: Mandibular overdentures with mini-implants can be considered a valid and practical alternative to conventional implant-supported overdentures in patients with atrophic ridges, medically compromised, and the elderly.

Abstract Direct pulp capping (DPC) is a conservative approach for preserving tooth vitality without requiring more invasive procedures by enhancing pulp healing and mineralized tissue barrier formation. We investigated the effectiveness of Platelet Rich Plasma (PRP) vs. Mineral Trioxide Aggregate (MTA) as a DPC agent. Forty-two teeth from three mongrel dogs were divided into two equal groups. After three months, the animals were sacrificed to evaluate teeth radiographically using cone-beam computerized tomography, histopathologically, and real-time PCR for dentin sialophosphoprotein (DSPP), matrix extracellular phosphoglycoprotein (MEPE), and nestin (NES) mRNA expression. Radiographically, hard tissue formation was evident in both groups without significant differences (p = 0.440). Histopathologic findings confirmed the dentin bridge formation in both groups; however, such mineralized tissues were homogenous without cellular inclusions in the PRP group, while was osteodentin type in the MTA group. There was no significant difference in dentin bridge thickness between the PRP-capped and MTA-capped teeth (p = 0.732). The PRP group had significantly higher DSPP, MEPE, and NES mRNA gene expression than the MTA group (p

Background: A key point in assessing dental implant prosthetic joints is their mechanical strength and biological response under the masticatory loading. The aim of the present systematic review was to evaluate the marginal bone loss and prosthetic behaviour of different internal/external bi-phasic implants. Methods: Randomized Clinical Trials (RCTs) have been considered for analytic purposes. The article screening was conducted on the Pubmed/MEDLINE, EMBASE and Google Scholars databases through an electronic process. Eligibility and risk of bias assessments were conducted for an article to be included in the data process. A series of pairwise meta-regressions for continuous variables was conducted considering the mean differences and 95% CI at two different timepoints: baseline and 1-year follow-up. The meta-analysis was performed comparing the following groups: internal conical prosthetic joint with index (IC), external hexagon bone level position (EI), internal tri-channel connection bone level position (ITC), internal hexagon 1 mm below the bone level (HI), internal hexagon bone level position (HI crest), cone morse 1 mm below the bone level (CM), cone morse bone level position (CM crest) and internal octagon bone level position (IO). The following parameters were considered for descriptive data synthesis: sample size, implant manufacturer, prosthetic joint type, prosthetic complications, marginal bone loss, study outcomes. Results: A total of 247 papers were identified by the electronic screening and 241 were submitted for the full text assessment. The eligibility process excluded 209 articles, and 32 studies with a low risk of bias were considered for the qualitative synthesis and further statistical methods. At the baseline, the CM showed a more effective efficiency and reduced marginal bone loss compared to IC, EI, ITC, internal hexagon, cone morse and internal octagon (p < 0.05). CM showed the lower rate of prosthetic complications and structural device failure including abutments and joint components under the loading compared to other joint types. Conclusion: Within the limits of the present investigation, the heterogeneity, the weight of the study model considered and the inherent differences between the dental implant properties, the pure CM showed a more consistent control of marginal bone loss at short- and medium-term follow-up. Despite the low rate of cumulative complications for all joints considered, the CM abutment joints were less prone to prosthetic failure at an early and medium-term follow-up.

Atrial fibrillation (AF) is a common cardiac arrhythmia that poses a significant risk of stroke and thromboembolic events. Anticoagulation therapy is essential for preventing stroke in patients with AF. An increasing number of people of all ages, including cardiac patients, approach physical activity as both a leisure-time exercise and a competitive sport. Therefore, patients at risk of AF are increasingly allowed to practice sports activities. Management of oral anticoagulant therapy (OAT) in these patients is extremely challenging because of the need to balance the risks and benefits of medications, considering both hemorrhagic (in case of trauma) and ischemic complications when the drugs are avoided. Official recommendations are limited for these patients and forbid sports that increase the risk of trauma and consequent bleeding in most cases. These recommendations are strongly influenced by the “traditional” management of OAT, which mainly involves coumarin derivatives. Non-vitamin K antagonist direct oral anticoagulants (DOACs), with their more favorable pharmacokinetic–pharmacodynamic profile than that of coumarin derivatives, may represent an opportunity to modify the approach to sports activity in patients with AF and indications for OAT. This study aimed to review the use of anticoagulants in athletes with AF, highlight their efficacy and safety, and provide practical considerations regarding their management.

Background: The goal of this in vitro study was to compare three different surfaces: two types of implant surfaces commercially available ([a] smooth/machined and [b] acid-treated surface) versus (c) anodized surface. Discs were manufactured with commercially pure titanium (CP) grade IV, which were subsequently analyzed by scanning microscopy and fibroblastic and osteoblastic cell cultures. Methods: Ninety-nine discs (5 × 2 mm) were manufactured in titanium grade IV and received different surface treatments: (i) Mach group: machined; (ii) AA group: double acid etch; and (iii) AN group: anodizing treatment. Three discs from each group were analyzed by Scanning Electron Microscopy (SEM) to obtain surface topography images and qualitatively analyzed by EDS. Balb/c 3T3 fibroblasts and pre-osteoblastic cells (MC3T3-E1 lineage) were used to investigate each group's biological response (n = 10/cellular type). The data were compared statistically using the ANOVA one-way test, considered as a statistically significant difference p Mach > AN). There was similar behavior for cell adhesion for the test groups (Mach and AN), with greater adhesion of Balb/c 3T3 fibroblasts compared to MC3T3 cells; in the AA group, there was greater adherence for MC3T3 cells compared to Balb/c 3T3 fibroblasts. Conclusions: The findings suggest that different surface characteristics can produce different biological responses, possibly cell-line dependent. These findings have important implications for the design of implantable medical devices, where the surface characteristics can significantly impact its biocompatibility.

Abstract Background Spread worldwide through droplets, the Virus Sars-Cov-19 has caused a global health emergency alarm. In order to limit its spread, the use of masks has become part of the daily life of the entire population, however, little is known about its constant use and the changes generated in the oral cavity. This work aims to investigate correlations between the continuous use of masks covering the nose and mouth for 3 h and changes in the ecological factors of the oral cavity. Methods 34 volunteers were divided into 2 groups: wear only the filtering facepiece code 2 (FFP2) mask (Group A) and wear the FFP2 mask covered by a surgical mask (Group B). Measurement of Volatile Organic Compounds (VOCs), saliva rehydration and consistency test, collection of basal saliva and saliva stimulated with paraffin gum and mucosal swab were collected and analyzed at two times: before using the mask(s) (T0) and 3 h after continuous use of the mask(s) (T1). Results The results indicated a significant difference between the groups, in which the basal saliva volume and pH and the peaks of VOCs increased for group B between T0 and T1. The rehydration time decreased and the volume and pH of the stimulated saliva increased, but with no significant difference between the groups. Furthermore, group B showed a significant decrease in Candida albicans Colony Forming Units (CFUs) and Total Bacterial Count (TBC) between T0 and T1. Conclusion It is concluded that the prolonged use of the FFP2 mask covered by a surgical mask can generate oral alterations in the user.

The present study evaluated the mechanical behavior of five designs of Morse taper (MT) connections with and without the application of loads. For this, the detorque of the fixing screw and the traction force required to disconnect the abutment from the implant were assessed. A total of 100 sets of implants/abutments (IAs) with MT-type connections were used, comprising five groups (n = 20/group): (1) Group Imp 11.5: IA sets with a cone angulation of 11.5°; (2) Group SIN 11.5: with a cone angulation of 11.5°; (3) Group SIN 16: with a cone angulation of 16°; (4) Group Neo 16: with a cone angulation of 16°; and (5) Group Str 15: with a cone angulation of 15°. All sets received the torque recommended by the manufacturer. After applying the torque, the counter torque of the fixing screws was measured in ten IA sets of each group without the application of cyclic loads (frequencies ≤ 2 Hz, 360,000 cycles, and force at 150 Ncm). The other ten sets of each group were subjected to cyclic loads, after which the detorque was measured. Afterwards, the force for disconnection between the implant and the abutment was measured by traction on all the samples. The untwisting of the abutment fixation screws showed a decrease in relation to the initial torque applied in all groups. In the unloaded samples, it was found to be −25.7% in Group 1, −30.4% in Group 2, −36.8% in Group 3, −29.6% in Group 4, and −25.7% in Group 5. After the applied loads, it was found to be −44% in Group 1, −43.5% in Group 2, −48.5% in Group 3, −47.2% in Group 4, and −49.8% in Group 5. The values for the IA sets were zero for SIN 16 (Group 3) and Neo16 (Group 4), both without and with loads. In the other three groups, without loads, the disconnection value was 56.3 ± 2.21 N (Group 1), 30.7 ± 2.00 N (Group 2), and 26.0 ± 2.52 N (Group 5). After applying loads, the values were 63.5 ± 3.06 N for Group 1, 34.2 ± 2.45 N in Group 2, and 23.1 ± 1.29 N in Group 5. It was concluded that in terms of the mechanical behavior of the five designs of MT IA sets, with and without the application of loads, the Imp 11.5, SIN 11.5, and Srt 15 groups showed better results compared to the SIN 16 and Neo 16 groups, showing that lower values of cone angulation increase the friction between the parts (IA), thus avoiding the need to maintain the torque of the fixing screw to maintain the union of the sets.

Objectives: The aim of this work was to systematically review and carry out a statistical metanalysis to identify the best treatment for close oroantral communications and fistulas and to avoid the risk of recurrence. Materials and Methods: An electronic search was conducted on the MEDLINE database (Pubmed), Scopus, and Google scholar using the following keywords: “oro antral communication (OAC)” OR “oro antral fistula (OAF)” OR “antro-oral communication” OR “communication between maxillary sinus and oral cavity” OR “oro-sinusal communication” OR “oro-sinusal fistula” OR “sinus communication” OR “sinus fistula” OR “antral communication” AND “treatment” OR “management” OR “surgical treatment” OR “surgical interventions”. This work was performed in accordance with the guidelines of PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-analyses). After article screening, 9 RCTs (randomized controlled trials), comparing two or more techniques, were included in this review. Results: A statistically significant difference was detected in favor of the buccal fat pad compared to the buccal advancement flap and palatal rotational flap. Conclusions: With the limitations of this study, the buccal fat pad showed the best results in terms of communication closure and reducing the risk of relapse.

Abstract The goal of this in vitro study was to evaluate and propose a new strategy for osseodensification technique using a drill counterclockwise to densification of bone of low density. Synthetic bone blocks of two different low densities (type III and IV) were used for the tests. The conventional drilling group (CD group) used Turbo-drill in a clockwise direction, and the osseodensification group (OD group) applied Turbo-drill in a counterclockwise direction. The applied tests were: (i) measurement of the temperature variation (ΔT) and (ii) measurement of the torque during the osteotomies, comparing the new strategy with the conventional drilling. Both groups were tested without (condition c1) and with (condition c2) irrigation, generating four subgroups: CDc1, CDc2, ODc1, and ODc2. Twenty osteotomies were made for each subgroup with a thermocouple positioned intra-bone (1 mm distant from the osteotomy) to measure the temperature produced. Other 20 samples/group were used to measure the torque value during each osteotomy in both synthetic bone density blocks. The mean of the ΔT during the osteotomies in type III bone was: 6.8 ± 1.26 °C for the CDc1 group, 9.5 ± 1.84 °C for the ODc1, 1.5 ± 1.35 °C for the CDc2, and 4.5 ± 1.43 °C for ODc2. Whereas, in the type IV bone, the ΔT was: 5.2 ± 1.30 °C for the CDc1 group, 7.0 ± 1.99 °C for the ODc1, 0.9 ± 1.05 °C for the CDc2, and 2.7 ± 1.30 °C for ODc2. The maximum torque during the osteotomies was: 8.8 ± 0.97 Ncm for CD samples and 11.6 ± 1.08 Ncm for OD samples in the type III bone; and 5.9 ± 0.99 Ncm for CD samples and 9.6 ± 1.29 Ncm for OD samples in the type IV bone. Statistical differences between the groups were detected in tests and conditions analyzed (p

Background: The socket shield technique (SST) could address the challenges in immediate implant placement by minimizing post-extraction bone resorption while maintaining soft tissue levels. This study aimed to summarize the available evidence and systematically assess the effectiveness of SST immediate implant placement regarding all outcomes (bone loss, esthetics, implant stability, probing depth, complications, and survival rate). Methods: We searched seven electronic databases through April 2023 to identify randomized clinical trials that assessed the effect of immediate implant placed with SST (test group) versus other implant placement protocols without SST. The risk of bias was assessed using Cochrane’s randomized trial quality assessment Tool (RoB 2.0). Random-effects meta-analysis was conducted, with mean difference and 95% confidence intervals (MD, 95% CI) as effect estimates. We used the GRADE approach to assess the certainty of evidence. Results: Twelve RCTs, involving 414 immediate implants, placed in 398 patients, were included. Meta-analyses revealed that the immediate implants placed with SST had a statistically significant decrease in horizontal (MD = −0.28, 95% CI [−0.37, −0.19], p < 0.0001), vertical (MD = −0.85, 95% CI [−1.12, −0.58], p < 0.0001), and crestal (MD = −0.35, 95% CI [−0.56, −0.13], p = 0.002) bone loss, as well as probing depth (MD = −0.64, 95% CI [−0.99, −0.29], p = 0.0003). Additionally, SST had a significant increase in implant stability (MD = 3.46, 95 % CI [1.22, 5.69], p = 0.002) and pink esthetic score (MD = 1.60, 95% CI [0.90, 2.30], p < 0.0001). Only two studies reported shield exposure incidences in the SST group; however, all studies revealed no implant failure and a 100% survival rate. The evidence certainty was assessed as very low. Conclusions: Based on limited evidence, SST was more effective in minimizing bone resorption and improving implant stability and esthetic outcomes than conventional immediate implant placement. Still, SST could not be recommended as a routine clinical protocol due to the lack of a standardized surgical approach; thus, further high-quality RCTs are required to support this conclusion.

Lip augmentation procedures have become gradually more popular and common due to cultural tendencies and an increasing association of the appearance of the lips with both beauty and youth. Different dermal fillers have been proposed for lip augmentation—such as collagen, calcium hydroxylapatite, hyaluronic acid, and polylactic acid—which are used as temporary fillers. The present case report describes the histopathologic and clinical management of one case of HA filler migrating into the intraoral cheek, which caused discomfort by intraoral swelling. There is also a review of the relevant literature. A female patient, V.A., 34 years old, smoker, no allergies to drug and food substances, came to our attention. The patient was referred to the Department of Innovative Technology in Medicine and Dentistry of the University “G. D’Annunzio” of Chieti-Pescara in Italy by her dentist for the removal of a mass present in the right cheek. The clinical examination of the patient revealed a single mobile mass mimicking a soft tissue tumor in the right anterior cheek. The mass was palpable and approximately 2 cm long and was causing pain and swelling. The mucosa appeared healthy without ulcers. The filler, which had migrated into the cheek, was removed by reaching it with a scalped blade. The material was stored immediately in 10% buffered formalin and processed for histological analysis. The literature search was carried out in accordance with the criteria of the PICO guidelines. Observed histologically, the filler was surrounded by fibroblasts and a few inflammatory cells and giant cells without granuloma formation. The clinical diagnosis was swelling and discomfort caused by chewing trauma, while the histological examination excluded discomfort due to a foreign body reaction caused by the HA used for a lip augmentation procedure. In conclusion, the high-pressure and high-volume filler injections probably caused a detachment of the tissues, with the orbicularis oris muscle concurrently acting as a pump and moving the HA implant, causing migration to the area with low-density tissue such as the cheek.

Abstract Background Chronic inflammation and cumulative oxidative stress have been theorized as two common pathways of the interconnection between periodontitis and diabetes. Improvement in oxidizing status has been demonstrated in periodontal patients with diabetes treated with proper non-surgical periodontal treatment. In addition to periodontal treatment, Gaseous ozone therapy has been reported to possess anti-inflammatory properties and the ability to stimulate the endogenous antioxidant defence mechanism. To date, the antioxidant effect of gaseous ozone, in addition with periodontal treatment in diabetic patients, has been examined in only one study. The aim of this study was to determine the efficacy of gaseous ozone therapy as an alternative approach to supporting non-surgical periodontal therapy (NSPT), aimed at improving antioxidant machinery and interfering with ROS production on plasma levels in diabetic individuals diagnosed with moderate or severe periodontitis. Methods One hundred and eighty patients with periodontitis and type 2 diabetes mellitus were randomly assigned to receive non-surgical periodontal treatment (NSPT) plus gaseous ozone therapy (A) NSPT alone (B). Clinical and periodontal parameters -Bleeding on probing (BOP), Periodontal pocket depth (PPD), and Clinical attachment Level (CAL)- and plasma levels of oxidant-antioxidant (TOS- TAOS) levels, glutathione (GSH), and malondialdehyde (MDA) were recorded at baseline and at 3- (T1) and at 6-months (T2) after treatment. Results Both treatments were efficacious in reducing clinical parameters. However, there were no significant differences regarding oxidative stress parameters in group A compared to group B. Conclusions In the present study, gaseous ozone therapy did not enhance the effect of periodontal treatment in reducing oxidative stress in plasma levels of periodontitis patients with type II diabetes. Trial registration The study was registered with ISRCTN1728169 (23/07/2022).

Zygomatic implants imply the use of the zygoma as the implant anchorage and have been proposed as a valuable alternative to the invasive classical procedures in cases of severe maxillary atrophy. Despite the numerous manuscripts published in this field, a quantitative analysis of the research products to infer the trends and the status identification of this specific issue was missing, as well as an objective map of this area. Thus, the present scientometric study analyzed all the research papers published within the interval 1990–2021 that included the keyword “zygomatic implants”. Research papers containing the keywords “zygomatic implants” were collected using Web of Science and analyzed with Cytoscape 3.7.2 and Sci software. A total of 654 studies were published between 1990 and 2020, reaching up to 11639 citations in total, with a mean of 17.8 citations per research study. Data show that the number of publications per year is rapidly increasing, as well as the sum of citations per year. While the USA was identified as the most productive country in this field, followed by Italy, Spain, and Brazil, the National Natural Science Foundation of China stands up as the major funding agency, followed by the National Institutes of Health (NIH) in the USA and the United States Department of Health and Human Services. The analysis of the keywords showed that “zygomatic fractures” represents the most common word within this field, with “complications” as the most recent keyword and “screws” as the keyword used for the longest time. The map of science representing the authors and their collaborations highlighted the existence of multiple small-size research groups that contribute to scientific production, forming highly clustered structures that do not collaborate between them. The present scientometric analysis demonstrates the rising interest in using the zygomatic implants technique as an alternative to the classical ones. The obtained data suggest that the scientific community involved in the study of such a field is highly fragmented, emphasizing the lack of communication among the scientists and research groups.

Dental implants and bone augmentation are among dentistry’s most prevalent surgical treatments; hence, many dental implant surfaces and bone grafts have been researched to improve bone response. Such new materials were radiologically, histologically, and histomorphometrically evaluated on animals before being used on humans. As a result, several studies used animals to evaluate novel implant technologies, biocompatibility, surgical techniques, and osseointegration strategies, as preclinical research on animal models is essential to evaluate bioactive principles (on cells, compounds, and implants) that can act through multiple mechanisms and to predict animal behavior, which is difficult to predict from in vitro studies alone. In this study, we critically reviewed all research on different animal models investigating the osseointegration degree of new implant surfaces, reporting different species used in the osseointegration research over the last 30 years. Moreover, this is the first study to summarize reviews on the main animal models used in the translational research of osseointegration, including the advantages and limitations of each model and determining the ideal location for investigating osseointegration in small and large animal models. Overall, each model has advantages and disadvantages; hence, animal selection should be based on the cost of acquisition, animal care, acceptability to society, availability, tolerance to captivity, and housing convenience. Among small animal models, rabbits are an ideal model for biological observations around implants, and it is worth noting that osseointegration was discovered in the rabbit model and successfully applied to humans.

Background: The thermal effect correlated with implant osteotomy could produce significant effects on the healing process and fixture osseointegration. The aim of the present investigation was to assess the heat generation and surface wearing of dental implant drills and manual tappers during simulated osteotomies on animal ribs. Methods: Steel drills (20 units per type) and tappers (20 units per type) were evaluated for a total of 30 osteotomies. The infrared thermal analysis was performed at the first and thirtieth osteotomy. The surface alteration and wearing was assessed by energy dispersive spectroscopy–scanning electron microscopy (EDS-SEM) prior to and after use. Conclusions: The drill material produced a non-significant temperature change during bone osteotomy. Lower heating was reported for manual tappers in favor of a manual osteotomy instead rotary instruments.